Ultimate Q {ROM} A507FN - Samsung Galaxy A50s ROMs, Kernels, Recoveries, & O

Gollo and shumway present you Ultimate Q full based on S20 One UI 2.1 we are not responsible for dead phones or bad installation made by you ... thanks
DESCRIPTION
*Support A507FN
*Android 10
*One UI 2.1
*may 2020 patch
*Zipaligned
*Debloat
*Root Magisk Manager
*S20 Wallpapers
*Some features of one UI 2.1
*Now you can use spotify as alarm
*Add quick share One UI 2.1
*you can now use your power key to run an application
*DressRoom ported One UI 2.1
*ShareLive Add 2.1
*AOD
*Tweaks performance and battery
*Some tinkering on touchwiz
*Other things I don't remember now
*Kernel Quantum Kernel Version: 1.5
BUGS
air command will crash need to go settings apps air command give premissions
DOWNLOAD
https://www.androidfilehost.com/?fid=8889791610682885895
CONTRIBUTION
@halcyon441, @prashantp01 , @santhoosh
Kernel source https://github.com/halcyon441-png/android_samsung_exynos9610
Telegram https://t.me/ultimate_Pie2

Deodex sir ?

change the source code into full link like this: https://github.com/halcyon441-png/android_samsung_exynos9610
it doesn't have "...".

Installation Guide
Your phone must be Installed TWRP Recovery for Android 10. If not, you can read*How to Install TWRP, Quantum Kernel and Rooting on Galaxy A50s Android 10 Q
- Enter TWRP Recovery Mode: Turn power off; Press and hold Volume Up key + Power key, when samsung logo appears release power key only, keep pressing volume up until TWRP recovery appears
- Select Wipe - Format Data - type "yes" and confirm
- Select Wipe - Advanced Wipe ( select "Dalvik, Cache, System" ) Swipe to Wipe
- Copy Ultimate Q rom zip from PC to Phone and install it ( ignore this if you have copied to sd card )
- Select Install ( If the file in SD Card: Select Storage - Micro SD card - OK ) - select Utimate_Q_A5075FN.zip Swipe to confirm Flash ( It takes more times )
- Select Reboot - Recovery ( boot system with magisk )
- Setup the Phone
- Run Magisk Manager for rooting (Connect the phone to internet first )
- Done!

halcyon441 said:
change the source code into full link like this: https://github.com/halcyon441-png/android_samsung_exynos9610
it doesn't have "...".
Click to expand...
Click to collapse
done thanks

Regarding Video Call Support
shumway66 said:
Gollo and shumway present you Ultimate Q full based on S20 One UI 2.1 we are not responsible for dead phones or bad installation made by you ... thanks
DESCRIPTION
*Support A507FN
*Android 10
*One UI 2.1
*may 2020 patch
*Zipaligned
*Debloat
*Root Magisk Manager
*S20 Wallpapers
*Some features of one UI 2.1
*Now you can use spotify as alarm
*Add quick share One UI 2.1
*you can now use your power key to run an application
*DressRoom ported One UI 2.1
*ShareLive Add 2.1
*AOD
*Tweaks performance and battery
*Some tinkering on touchwiz
*Other things I don't remember now
*Kernel Quantum Kernel Version: 1.5
BUGS
air command will crash need to go settings apps air command give premissions
DOWNLOAD
https://www.androidfilehost.com/?fid=8889791610682885895
CONTRIBUTION
@halcyon441, @prashantp01 , @santhoosh
Kernel source https://github.com/halcyon441-png/android_samsung_exynos9610
Telegram https://t.me/ultimate_Pie2
Click to expand...
Click to collapse
Hii there,
I just want to ask that the Volte Video call is working or not with this Rom apkablog

sumit1190 said:
Hii there,
I just want to ask that the Volte Video call is working or not with this Rom apkablog
Click to expand...
Click to collapse
IT SHOULD

Samsung A50s SM-5070
Hello, i have a A50s SM-5070. It's a 6Go RAM and 128 Go ROM with a Exynos 9611
Can this rom work on it.

trentanel said:
Hello, i have a A50s SM-5070. It's a 6Go RAM and 128 Go ROM with a Exynos 9611
Can this rom work on it.
Click to expand...
Click to collapse
yes sorry for late reply

shumway66 said:
yes sorry for late reply
Click to expand...
Click to collapse
Don't be sorry, thanks for your reply.
Can you explain me, how to install TWRP on this device ? I tried with this link :
https://forum.xda-developers.com/ga...recovery-galaxy-a50s-twrp-kernel-mod-t4111591
TWRP is well flashed, but the phone doesn't want to reboot in recovery; or or else I'm doing it wrong.
Then i flashed the stock ROM .
@ redymedan told me that it was tested only with a SM-A507FN.

trentanel said:
Don't be sorry, thanks for your reply.
Can you explain me, how to install TWRP on this device ? I tried with this link :
https://forum.xda-developers.com/ga...recovery-galaxy-a50s-twrp-kernel-mod-t4111591
TWRP is well flashed, but the phone doesn't want to reboot in recovery; or or else I'm doing it wrong.
Then i flashed the stock ROM .
@ redymedan told me that it was tested only with a SM-A507FN.
Click to expand...
Click to collapse
TWRP AND ROM is built from source and frimware A570FN sir

Nguyen2001 said:
TWRP AND ROM is built from source and frimware A570FN sir
Click to expand...
Click to collapse
Should we deduce that ROM and recovery for A570FN are not suitable for a A50s sm-5070 ?

vophongnguyen said:
I think so
If there is any developer that supports twrp for the a5070 I promise you will have custom rom for you
Click to expand...
Click to collapse
It would be really great

hello confirmed one UI 2.0 not 2.1:silly:

The preinstalled magisk got problem. Can u remove it? This is the only android 10 ROM left

Related

[ROM][GS2 I9100][LP 5.0.2][18/01/15] Roshnaie-ROM [End of Darkness][BETA]

Welcome XDA friends, Roshnaie-ROM is back with new source build, cm-12.0 based rom for our (Old is Gold) device (Galaxy S2)
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, etc..
Features and Details:
Code:
Device: Galaxy SII
Model: GT-i9100
ROM Version: Beta 1
Kernel: 3.0.101- Apolo-8.0_Beta3
Latest cm-12.0 features
ROM Download Section:
Beta 1 Build #2 (Hit Thanks if i helped you )
Previous Builds:
Beta 1 Build #1
GAPPS Download Section:
Link (Nano Recommended)
Installation Requirements:
- Up to 30% Battery Charge
- Kitkat Compatible Recovery.
Tips and Guide 2nd Post
Change logs 3rd Post
Credits:
- XDA (For all learning and everything)
- CyanogenMod Team
- @Lysergic Acid (For Inspirations)
- @jackeagle @Vivek_Neel (For Great Guide Here and Here)
- @pedestre (For Kernel Here)
- AndroidFileHost (For Hosting)
- Mediafire (For Hosting)
- Github
- @Troubadour666 (For first test and feedback)
- Please PM me if i forgot your name
XDA:DevDB Information
Roshnaie-ROM, ROM for the i9100
Contributors
ab-samy
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Any
Based On: CyanogenMod 12.0
Version Information
Status: Beta
Current Beta Version: Beta 1
Beta Release Date: 2015-01-17
Created 2015-01-17
Last Updated 2015-01-18
Tips and Guide
- Partition your internal memory for better app management, Guide Here Thanks @metalgearhathaway
- Reboot recovery once you wipe then flash Roshnaie-ROM and Gapps.
Flash Guide:
Coming from none cm-12.0 ROM:
Download R-12-XXXXXXX-UNOFFICIAL-i9100.zip from download section and put it on your Sdcard.
Download CWM Kitkat compatible recovery and put it on your Sdcard (Google it).
Reboot to recovery then wipe all data
Reboot recovery (located on Advanced option or reboot option)
Flash R-12-XXXXXXX-UNOFFICIAL-i9100.zip (lollipop ROMs taking a bit longer time during flash and boot than others)
Flash Gapps (Optional)
Reboot.
Coming from cm-12.0 ROMS:
Wipe Cache
Flash R-12-XXXXXXX-UNOFFICIAL-i9100.zip.
Reboot.
Change logs:
Latest CM Change logs on Build #2
-Clear out icon resources for non-composed icons
-AudioFX: materialize
-Improve settings menu
-CMFileManager : Adding mime-type support for audio/amr
-Increase the maximum size for attachments.UnifiedEmail
-Telephony: Fix translatability
-xmm6262: Fix bulding libril with debug enabled.
-LatinIME: Enable Greek spell checking
-LatinIME: Enable spellchecker for additional languages
-LatinIME: Fix dicttool build
-Prevent copyNativeLib of package scanning to reduce booting time.
-SystemUI: Fix system ui crash while continuously click flash light tile issue
-SystemUI: Fix user profile activity overlapped by status bar panel issue
-Stop the StkAppService in multi sim scenario correctly.
-Framework: Fix GSM signal strength
-Settings: Add HighTouchSensitivity support
-Settings: Fix profiles Wi-Fi strings
-Fix "ghost" weather display in expanded status bar
-and much more....
Thanks @ab-samy
coming from Validus with Apolo Beta3 , flashed and booted fine .
realy thanks for 1rst rom with Theme Chooser integration
One more ROM to try is always welcome! Thank you!
I see you can customize tiles here, am I right? Also, how's the camera app behaving?
list
Do we have a very basic, working not working lst gentlemen
Wow Another ROm for our Old S2....Thanks Devs!
nice to see
eminem_b said:
I see you can customize tiles here, am I right? Also, how's the camera app behaving?
Click to expand...
Click to collapse
RenX10 said:
Do we have a very basic, working not working lst gentlemen
Click to expand...
Click to collapse
We all know HD Video recording not working on stock camera
Features?
Thanks for the ROM. Would be nice to see what features this ROM adds beyond CM12... Is there such a list? The list in the link to this ROM is for JB 4.1.2 and is very old...
So its practically the same as cm12..awesome
it's keep rebooting into recovery !!!
i flashed the Kitkat Compatible Recovery.
and then rom
but still reboot into recovery !!!
ab-samy said:
We all know HD Video recording not working on stock camera
Click to expand...
Click to collapse
Hi mate! Nice to see your new ROM for S2!!!
I'm about HD 1080 record : yeah it's known CM code not fixed yet.
I extracted from Spirit Rom 1.7 KitKat and put into system folder with similar permission and everything works perfectly! Maybe it's have some solution for your next update!? Just for info! Using RR 5.2.9 latest!
Thanks!
mahaseno said:
it's keep rebooting into recovery !!!
i flashed the Kitkat Compatible Recovery.
and then rom
but still reboot into recovery !!!
Click to expand...
Click to collapse
Do clean install
ab-samy said:
Do clean install
Click to expand...
Click to collapse
i did
but still rebooting into recovery
Good initiative
i like this
you can't work with Lysergic Acid For add this Features For CM12 rom's ?
شکریہ
ZaFaR97 said:
Good initiative
i like this
you can't work with Lysergic Acid For add this Features For CM12 rom's ?
شکریہ
Click to expand...
Click to collapse
Witch features? this rom already has latest cm-12.0 features.
mahaseno said:
i did
but still rebooting into recovery
Click to expand...
Click to collapse
Make sure you have downloaded the rom correctly and also flash an stable CWM Kitkat compatible recovery, already tested by me and some others it working, and also search for lollipop roms requirements related guide.
same here
keeps booting back to recovery with CWM KK compatible (coming from 4.1.2JB rom)
so I flashed Apollo Beta 3, reboot recovery and flashed from there and just now it finally booted.
my experiences so far
- SCR 5 Lollipop recorder works ( it doesn't work w/ CM12 unofficial but works with RR lollipop)
- FX File manager doesn't show double entries of Phone and SD storage ( on CM12 unofficial and RR lollipop it shows double of each storage). So probably I wont get double list of media files in PowerAmp, MX player etc when I install them later.
- SimToolKit works ( I tested inquring load balance from my sim. Never got it to work w/ CM12 and RR Lollipop. it just loads and exits but I never get the reply messages from my network)
more to follow as I play with it later.
edit - Simtoolkit is not properly working. Now I get "invalid reqest format. cannot be processed" messages when requesting load balance. cannot call customer care access other SIM features. only Phonebook and inbox storage selection seems to be working.
janhenz said:
same here
keeps booting back to recovery with CWM KK compatible (coming from 4.1.2JB rom)
so I flashed Apollo Beta 3, reboot recovery and flashed from there and just now it finally booted.
my experiences so far
- SCR 5 Lollipop recorder works ( it doesn't work w/ CM12 unofficial but works with RR lollipop)
- FX File manager doesn't show double entries of Phone and SD storage ( on CM12 unofficial and RR lollipop it shows double of each storage). So probably I wont get double list of media files in PowerAmp, MX player etc when I install them later.
- SimToolKit works ( I tested inquring load balance from my sim. Never got it to work w/ CM12 and RR Lollipop. it just loads and exits but I never get the reply messages from my network)
more to follow as I play with it later.
Click to expand...
Click to collapse
100%
it's booting now

[OFFICIAL] [MIUI 7][UPDATE NO-5.12.17] [4.4.2] [BETA]

Update No.- 5.12.17
2nd Prize Winning ROM of MIUI Porting Contest
Click here to know more
A ROM by @[COLOR="SandyBrown"]fa1zali[/COLOR] for Micromax Canvas HD & similiar devices.​All Rights Reserved.All other trademarks are property of their respective owners.​
MIUI Forum : *Click Me*​
Features :
-Based on Android 4.4.2
-Ported from Redmi 1 ( Beta Version )
-Pure MIUI
-Pre-Rooted
-Antivirus
-System & Memory Cleaner
-Record FM and Calls
-Privacy Management
-Power Management
-Data Saver Feature
-Block unwanted calls and messages
-Burst and HDR Modes in Camera
-One Handed Mode
-Guest Mode
-GOD OF CUSTOMIZATION :angel:
-New MIUI 7 Themes
-Redesigned App Icons
-New Settings Arrangement
-Better Toggle Style
-Notification Blocking in Notification Shade
-Improved System Performance
Read FAQ :
Please don't ask noobish questions, first read the FAQ
BUGS :
-A116i users do not install the ROM as camera will not work for you.
Installation Instructions :
Code:
[SIZE="4"]-Download ROM and store on Internal or External SD
-Start Recovery Mode. ( Use only PhilzTouch Recovery )
-Take full backup in recovery mode.(In case of any problem)
-Wipe data or factory reset.
-Wipe cache partition.
-Wipe Dalvik Cache
-Format System
-Install ROM[/SIZE]
Credits :
hyperion70 - For his Kernel for MT6589 devices.
Kernel Source Code - https://github.com/hyperion70/tinno89_wet_kk
XIAOMI & MIUI -For Providing the ROM.
DON'T FLASH ANY KERNEL
Note :
-IMPORTANT: FLASH AT YOUR OWN RISK. We are not responsible for any bricked phones or damages caused due to the ROM. You lose
warranty when you root/flash ROMS on your phone.
-BATTERY: Keeping at 100% charged is recommended before flashing.
-BACKUP: Take BACKUP from recovery, useful in case you mess up. Or try Titanium to backup all data and apps.
-Please do not mirror without permission.
-Do not port without permission
-Please read the FAQ first as it might help you.
-Please don't send PM. Ask queries in the thread only.
-Please do not send request to add any app / themes.
-This ROM will be kept as as close to pure MIUI to give a rich experience.
-Please don't ask for when will you update the ROM.
-I won't guarantee anything about my ROM. If you like it keep it otherwise the most simple thing you can do is switch to some other ROM.
Screenshots : Click Me
Download : Post No.2
Hit thanks if you like my work :good:
Visit my Blog : Click Me
XDA:DevDB Information
MIUI 7, ROM for the Micromax A116
Contributors
fa1zali, hyperion70, XIAOMI, MIUI
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: MIUI
Version Information
Status: Beta
Current Beta Version: 5.8.20
Beta Release Date: 2015-12-20
Created 2015-08-25
Last Updated 2016-04-01
DOWNLOADS
Downloads :
MIUI 7 ROM ( v5.12.17 ) : Click Me
Sound Patch : Click Me
Modem Patches : Click Me
SuperUser : Click Me
Memory Patch ( 2GB Phone Storage ) : Click Me
PhilzTouch Recovery : Click Me
-Use PhilzTouch Recovery to install the ROM.
FAQ ?
Q1.How to enable ROOT ?
Ans. Go to Security > Permissions > Root access and then enable the toggle for the particular app which you want to give root access. You will see 5 different pop-ups, each for 5 seconds. Wait and keep confirming to grant root access to it.
OR
Just flash SuperUser zip file and easily manage root permissions for your apps.
Q2. Mobile Data ( 3G OR 2G) not working what to do ?
Ans. Just disable your mobile data first from the settings , then restart your phone , after restarting check your apn settings and complete them , then enable mobile data and it will start working.
Q3. Xposed does not works on the ROM.
Ans. MIUI does not supports Xposed instead of that you can use WSM Tools.
By using WSM Tools you can use the Xposed modules which are supported by WSM Tools.
Q4. Unable to download apps from the Play Store and large files when using mobile data ?
Ans.First open the Downloads app present on the home screen, go into its settings.
Change the download limit to unlimited and also disable Xunlie Download Engine . Now try downloading apps from the play store it should work and also you will be able to download large files.
Q5. How to move apps to SD-Card ?
Ans. Moving apps to sd does not works on MIUI.
Q6. How to Turn ON flash light from Lock Screen ?
Ans.The lock screen on the MIUI v6 or v5 had a few extra functions than the standard unlocking and shortcuts. One of them is turning flashlight On directly from the lock screen. For that, while the screen is active but locked, you just need to long press the home button and the torch / flashlight turns on. It would not turn off until you prompt it although the screen would go blank in a few seconds.
Q7.How to Change the look of Multitasking / Recent Menu ?
Ans.By default, when you press the Recent key (the left bottom one), the recent apps show up, and it is just the App icon that is seen. But, you can make it look like the iOS multitasking screen where large thumbnails are shown, with the preview of what is going on in the app. You can change that by “pinching out on the empty area in the multitasking screen”. Pinching in / out is what changes the look, basically.
Q8.How to Enable or Change Notification Light Color ?
Ans.There is an option that allows you to change the change the notification light as well as turn it off completely. To do that you have to go to Additional Settings section, and tap on notification light. There you would find four option, first would allow you to switch ON or OFF the Pulse Notification light while other options allow you to change colors for notifications, calls, as well as messages. You can choose only 2 colors ( GREEN OR RED ), which will appear in the LED present just below the home button.
Q9.Facebook Messenger pop-up head does not appears , what to do ?
Ans.Go to Security icon on the homscreen > Permissions > Again Permissions > Open Messenger > Enable Display pop-up window.
You can follow the same method for other apps as well which have the feature of pop-up head notification.​
FOR ALL OTHER QUESTIONS, Post in FAQ? Regarding MIUI ROM​
awesome job
Lol couldn't believe it when i saw it the first time MIUI 7
Nice rom much more smooth than miui6 still ram consumption is high but thanks for a great rom
Like To Banta Hai Boss :good:
thanks for a great rom
good work fa1zali keep it up!!
Any reviewers for the ROM? Miui 7 is here..kool!! Thanks Dev!!
Sent from my Micromax A116 using XDA Free mobile app
Downloading broken ! Pls fix this fa1zali
rane1810 said:
Downloading broken ! Pls fix this fa1zali
Click to expand...
Click to collapse
Downloading Works fine don't pause it.let your download to finish
perfect perfect
Hats off... Just perfect and magnificiant..... best rom.....
P.S: can ART be used in this rom?
Thank you for the great ROM. Downloading now will flash in the evening +1 to the dev.
Thanks for the ROM, i'm trying it now !
I just have a question : I'm French and there are no French in this ROM, so I use English. But how to force the apps (Play Store, YouTube...) to display in French ?
Thank you, that's a smooth a stable ROM !
1. No 3g in sim 2.
2. Sim 1: No signals on 3g only mode.
3. Ram consumption is high.
Little bugs but v.beautiful, battery friendly and stable rom to use... thanks to developer.
Well, I found a solution to my problem ! I use this app : https://play.google.com/store/apps/details?id=com.wowapp.localemorepro
tekken 2 said:
1. No 3g in sim 2.
2. Sim 1: No signals on 3g only mode.
3. Ram consumption is high.
Little bugs but v.beautiful, battery friendly and stable rom to use... thanks to developer.
Click to expand...
Click to collapse
Before complaining anything you should know that this ROM is made specifically for Indian users.
Every person who uses custom ROM knows this -
"If anyone is from a different country then they are aware that network problem may arise so to avoid such issues they should flash modem patches specific for their country."
So just flash modem patches available on A116 Forum.
Are you using MIUI for first time. RAM consumption is always high on MIUI.
@fa1zali
Thanks for the ROM
But WSM not downloading modules
please help me
leo.riv said:
@fa1zali
Thanks for the ROM
But WSM not downloading modules
please help me
Click to expand...
Click to collapse
The ROM is totally a new version of MIUI.
There can be compatibility issues of the wsm tools with new miui 7.
So its not the fault of rom.
Just wait for wsm tools to get updated.
fa1zali said:
The ROM is totally a new version of MIUI.
There can be compatibility issues of the wsm tools with new miui 7.
So its not the fault of rom.
Just wait for wsm tools to get updated.
Click to expand...
Click to collapse
Thanks for reply
I am using 2.3.5 Version WSM Tools
Dude please let me know... If 3g is working on both the sims
Mi sound enhancer and
equalizer not working on A116.
please find a patch

[CPN3/Lite][VoLTE]MIUI PRO 9.2.1 [Updated]

MIUI PRO 9.2.1
Ported directly from Redmi Note 4 Mtk
1ST BOOT TAKE ALOT OF TIME ABOUT 15-20MINS. PLEASE TAKE A TEA BREAK WHILE IT BOOTS
CREDITS:
 @Aryan raj
@tEaM PC
@chalapathi
@bhuwaneshwaran Vasu
@kuber Sharma
@Irma Nasre
@tEaM WIN
@కె. వేణు
@Uday Hegde
@Rock Roc (For enlightening my urge to port MIUI rom)
@everyone looking forward to use this Rom
@Let me know if i missed anyone
Some of the features :
*Pre-rooted with Magisk
*Fully Deodexed
*Spectrum support
*Google Assistant
*Wallpaper carousel fixed
*Fast charging tweak
*Battery mAh corrected
*Flight mode bug fixed
*Custom boot animation
*Factory text removed from boot screen
*Custom boot screen [Coolpad removed]
*Headphone & audio settings FC fixed
*Low sound fixed
*Face detection unlock
Many more
IMPORTANT NOTE
*Do not update Magisk manager and don't flash any safety net patch.
*Do not update MIUI software.
*If VoLTE doesn't show up don't worry go to Settings>Simcards & mobile network>VoLTE enabled toggle it once. Activate data roaming if you're in roaming network.
*I'll ignore you're comments if:
-quoted the whole OP post
-silly questions and error done from your side
Installation Instructions Read Carefully :
COOLPAD NOTE 3 USERS:​
*Boot to any marshmallow recovery
*Wipe Cache, System, Dalvik, Data
*Flash Rom
*Wipe dalvik cache
*Reboot
COOLPAD NOTE 3 LITE USERS:​
*Boot to any marshmallow recovery
*Wipe Cache, System, Dalvik, Data
*Flash Rom
*Flash Porting script
*Wipe dalvik cache
*Reboot
Bugs:
*Audio setting headphone click makes settings fc (But ear phone works perfectly)
*Double tap wakeup
Download Links
MIUIPROV9.2.1updated_Akky.zip
PC kernel for Cpn3
Dolby Atmos
Porting script for Lite Users
Youtube
XDA:DevDB Information
MIUI PRO 9.2.1 MT6753, ROM for the CoolPad Note 3
Contributors
akky26
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.x
ROM Firmware Required: Marshmallow Recovery
Based On: MIUIPro Redmi Note 4 MTK
Version Information
Status: Stable
Stable Release Date: 2017-12-30
Created 2017-12-30
Last Updated 2018-01-05
Reserved
Reserved
It works very nicely, thanks. Please see if you can port with naugat or oreo.
Thanks akky26, this one too working well including headset settings.
reboot problem
My mobile reboot automatically at least two or three times a day after flashing this rom. Please suggest solution on this problem.
BBC777 said:
It works very nicely, thanks. Please see if you can port with naugat or oreo.
Click to expand...
Click to collapse
Till now, I have not face any issue on my CPN device except bug which was mention on forum,
but double tab wake option working for my device, either you disable or enable but it's
working.
Are you planning to port this with naugat or oreo?
HARISHFIRKE said:
My mobile reboot automatically at least two or three times a day after flashing this rom. Please suggest solution on this problem.
Click to expand...
Click to collapse
Use Partial wakelock app from gplay store and set its settings to Partial wake.
BBC777 said:
Till now, I have not face any issue on my CPN device except bug which was mention on forum,
but double tab wake option working for my device, either you disable or enable but it's
working.
Are you planning to port this with naugat or oreo?
Click to expand...
Click to collapse
Double tap bug is when you use any other kernel that doesn't supports it, as mentioned in OP d2w bug in PC kernel
Nougat and oreo roms lack VoLTE support that's why not planning to port it now.
Settings not working
I flashed the phone with your ROM. After everything is completed, I am not able to use the Settings in the phone.
I receive this issue.
"Unfortunately, settings has stopped"
Can you help me to fix this issue.
Thanks in advance.
akky26 said:
MIUI PRO 9.2.1
Ported directly from Redmi Note 4 Mtk
Read the installation instructions before flashing
Note if VoLTE doesn't show up don't worry go to Settings>Simcards & mobile network>VoLTE enabled toggle it oonce. Your'e done.
1ST BOOT TAKE ALOT OF TIME ABOUT 15-20MINS. PLEASE TAKE A TEA BREAK WHILE IT BOOTS
CREDITS:
@TEAM PC
@Chalapathi
@Bhuwaneshwaran Vasu
@Kuber Sharma
@Irma Nasre
@TEAM WIN
@కె. వేణు
@Uday Hegde
@Rock Roc (For enlightening my urge to port MIUI rom)
@Everyone looking forward to use this Rom
@Let me know if i missed anyone
No need to flash any safety net patch or magisk on the rom. Don't upgrade the magisk.
Features:
Stable VoLTE
Magisk safety net working stable
Double tap sleep
Notification led fixed
Flight mode bug fixed
Custom animations
Face detection unlock
Dolby can be flashed if you need
PC kernel recommended for better battery backup and fixing incoming call bug
And many more
Installation Instructions Read Carefully :
COOLPAD NOTE 3 USERS:
*Boot to any marshmallow recovery
*Wipe Cache, System, Dalvik, Data
*Flash Rom
*Flash FP patch
*Note 3 users flash pc kernel (to avoid jio reboot bug)
*Wipe dalvik cache
*Reboot
COOLPAD NOTE 3 LITE USERS:
*Flash Porting script
*I dont have Note 3 lite but i guess you don't need to flash other kernel for better performance. Some one pls upload Note 3 lite users instruction after installing it for ease.
The Rom comes with Team zero Kernel to prove rom has double tap wakeup Option, On the other hand it has incoming call restart bug.
For good battery backup use PC kernel
SO I RECOMMEND TO FLASH PC KERNEL.
Bugs:
*Audio setting headphone click makes settings fc (But ear phone works perfectly)
*Double tap wakeup bug in PC kernel
Links:
Rom
https://drive.google.com/open?id=1HNbvLaKHBTLVsalfXASmklIqJgOD6FcT
FP patch
https://drive.google.com/file/d/1lie_oYvd3Z9Bz_5BpBIlot1nXT8TEgs0/view?usp=sharing
PC kernel
https://drive.google.com/file/d/1ewU8hXf0_T4d-__SRn9cMZMwvfbdBeCY/view?usp=sharing
Dolby
https://drive.google.com/file/d/190OZo9prHOpopoFQxR4nSTLVVtTXaLoV/view?usp=sharing
Porting script for Lite Users
https://www.mediafire.com/file/7taro1829cj6mp2/Rom_Porting_Script.zip
Youtube
XDA:DevDB Information
MIUI PRO 9.2.1 MT6753, ROM for the CoolPad Note 3
Contributors
akky26
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.x
ROM Firmware Required: Marshmallow Recovery
Based On: MIUIPro Redmi Note 4 MTK
Version Information
Status: Stable
Stable Release Date: 2017-12-30
Created 2017-12-30
Last Updated 2018-01-05
Click to expand...
Click to collapse
rajesh_kodees said:
I flashed the phone with your ROM. After everything is completed, I am not able to use the Settings in the phone.
I receive this issue.
"Unfortunately, settings has stopped"
Can you help me to fix this issue.
Thanks in advance.
Click to expand...
Click to collapse
Please don't quote the whole OP , kindly give me details which device you have flashed on and what was the previous rom you were using before flashing, just to mention clean flash is always recommended.
Settings not working.
I flashed coolpad note3 which was in
coolui 8,
build no v022,
model number CP8676_I02,
Android version 6.0
Hope this helps.
rajesh_kodees said:
I flashed coolpad note3 which was in
coolui 8,
build no v022,
model number CP8676_I02,
Android version 6.0
Hope this helps.
Click to expand...
Click to collapse
I request you to clean flash the rom. Wipe system, cache, dalvik and data. Just to mention headphones and audio settings option gives fc in old version
Thank you very much for this awesome ROM. Much awaited for a stable VoLTE in MIUI.
One little thing. Google drive is not allowing to download Dolby Atmos. It throws the error "Sorry, this file is infected with a virus
Only the owner is allowed to download infected files." Can you please provide mirror link in some other host sites?
GKarthee said:
Thank you very much for this awesome ROM. Much awaited for a stable VoLTE in MIUI.
One little thing. Google drive is not allowing to download Dolby Atmos. It throws the error "Sorry, this file is infected with a virus
Only the owner is allowed to download infected files." Can you please provide mirror link in some other host sites?
Click to expand...
Click to collapse
Download dolby from magisk modules
Hello with this rom, do we have to flash team-pc-kernel-note 3 too?
BBC777 said:
Hello with this rom, do we have to flash team-pc-kernel-note 3 too?
Click to expand...
Click to collapse
No its optional. The rom comes with zero addition v2 kernel. Flashing Team PC kernel is optional. It is recommended not to flash any other kenel on the rom. Keep zero addition kernel v2 only which comes with rom itself.
Nice
akky26 said:
No its optional. The rom comes with zero addition v2 kernel. Flashing Team PC kernel is optional. It is recommended not to flash any other kenel on the rom. Keep zero addition kernel v2 only which comes with rom itself.
Click to expand...
Click to collapse
Thanks!!!
After Install this rom... Setting foes not open it shows "Unfortunatly Setting has stopped" Any solution for this
Mini 9.2.1for colloid note 3 lite
After installation as per your instructions...
Everything is OK.
But setting does not work
And restarting
Before used custom Rom
1, ambio
2. Alpha
3.miui pro 9. (setting problem occurred )
Tell me how to solve setting issue

《ABANDONED》{ROM}{Updated} Cookie Rom Oreo 8.0 For SM-G570M/F/Y

Did u miss me? jaja ok guys i still here, and now i bring to you an oren based rom for your beloved j5 prime M variant
Features:
odexed for fast boot
added samsung features
super kernel 2.0 for amazing performance and battery life
added some pie apps
others stuff
Installation:
put the zip file in your sd card
wipe data and then all partitions
open twrp and search for the rom and flash it
wait a few minutes enjoy
you need TWRP 3.2 to install this rom
Download: Cookie Rom
SM-G570M:
Download Cookie Rom S:
fixed some errors and added some features
make full wipe before install this update
Cookie RomS
Update Cookie Rom F Changelog:
Added Dolby Atmos ported from j6+
fixed multiwindow
updated gpu drivers
updated pie apps
updated some system apps
fixed weather location
stock updated gallery
some minor changes
added autotheme
others fixes
Download: Cookie Rom F
SM-G530F
added support for F variant ( cookie rom S )
Cookie Rom S F variant
SM-G530Y
updated with the new super kernel 2.0
Download:
Cookie Rom Y variant
Cookie Rom Alpha:
Changelog:
updated with stable pie apps
fixed and cleaned the code for better stability
performance improved without sacrifice battery life
kernel has been optimized with lz4 ram compression
some other stuff than i dont remenber
Only for M variant until now, other variants will be added later
Download:
Cookie rom Alpha
Oficial Telegram group for support and more:Telegram Group
Give us a like in our official fb comunity
Tutibreaker Designs in FB
ROM OS Version: 8.0.x Oreo
ROM Kernel: Linux 3.xx
ROM Firmware Required: Stock Oreo Android 8.0
Status: STABLE
Created 11-11-2018
Last Updated 27-01-2019
Special thanks to:
@corsicanu for ported pie apps
@adrodef for defex patch
@topjohwu for magisk app
@NiGhT6488 for the port to Y variant
@eNVy for his great pie theme
@Attie2 for add F variant support
Hit Thanks if you like my work :good:
include root and magisk? thanks
Thanks, TutiBreaker
I installed this Cookie ROM over the Cocktail Rom and it is perfect !
Quick question, flash via twrp = userdata preserve?
Its for g570y? And rooted already? Thinks for reply
Sadlyharry said:
Quick question, flash via twrp = userdata preserve?
Click to expand...
Click to collapse
I installed over the old Cocktail Rom and everything is Saved and working perfectly.
Perfect
Telegram group is a joke... useless. Spanish only and full of condescending and 2 word explanations. So, thanks but no thanks!
mach07 said:
Telegram group is a joke... useless. Spanish only and full of condescending and 2 word explanations. So, thanks but no thanks!
Click to expand...
Click to collapse
you should thank him for being the only active developer that produces great ROMs for the G570m
Should I? Even if I was not able to use it for lack of maturity from his group's "admins"? Bando de nóia...
I remember a time when I created such projects for iPhone. The thing is, if you gonna do it, do it right! Not the OP's fault actually, but the peoples he choose as supporters.
No, I thank AnonMx for his BeltaOS (that works flawlessly) and for his supporters, that provide support and answers for the questions at hand.
mach07 said:
Should I? Even if I was not able to use it for lack of maturity from his group's "admins"? Bando de nóia...
I remember a time when I created such projects for iPhone. The thing is, if you gonna do it, do it right! Not the OP's fault actually, but the peoples he choose as supporters.
No, I thank AnonMx for his BeltaOS (that works flawlessly) and for his supporters, that provide support and answers for the questions at hand.
Click to expand...
Click to collapse
dont cry bb
I guess the G570F variant will never get this rom ;-;
Thanks for added Y variant
This was a lovely rom for Y variant. The only problem I encountered was the vpn apps are not compatible on this rom.
Sent from my SM-G570Y using Tapatalk
@tutibreaker, I downloaded the Cookie ROM S but I open the zip and I didn't find the file boot.img
andreluizbarbieri said:
@tutibreaker, I downloaded the Cookie ROM S but I open the zip and I didn't find the file boot.img
Click to expand...
Click to collapse
so?
tutibreaker said:
so?
Click to expand...
Click to collapse
Cookie ROM without S had boot.img and the Cocktail ROM had also boot.img but the New Cookie ROM S have NO this file .... is it correct ? Can I install it over the old cookie Rom without Wipe Data (I installed the cookie over the cocktail without wipe data) ?
Edited : everything working ! I updated over the old cookie without wipe data
Porting To SM-G570F
May I ask tutibreaker if there are any intentions of the development team to port Cookie Rom to SM-G570F? I installed Cookie-Rom (M variant) over my F variant and I got a bunch of bootloops.
Root access
ROM working great, but root access option not found in developer options. Can I enable adb root somewhere else?
fetofatal said:
ROM working great, but root access option not found in developer options. Can I enable adb root somewhere else?
Click to expand...
Click to collapse
Use the Magisk

[26.06.23] N986B I N985F/DS I Dr.Ketan ROM I OneUI 5.1 I OneUI 4.1 I OneUI 3.1

N986B/N985F Dr.Ketan ROM
Supported device : N986B N985F
We do support usually 2-3 years since device launched, but yet no guarantee, We may drop support for any device / any variant/s anytime without any prior notice.
ROM Features
ROM Features varies with version of ROM. For more details, read changelog post. Link available in post #3 for changelog of all versions.
Must read changelog for a version you are going to install, it will have latest information about features, changes, known bug list/fix and Installation guide of respective version.
Credit and Thanks :
Spoiler
@Chainfire - Respected elite developer for supersu and his unbelievable contribution to XDA/Android community. @wanam - Respected elite developer for his awesome contribution and references to his works.
corsicanu for TWRP. Original Thread here
@topjohnwu for Magisk
@xperiacle the amazing developer for reference to his work and tools. @amarullz for aroma installer. @gharrington for 3minit battery and QuickLaunch.
ROM Control source and all credit and thanks goes to @daxgirl and @Wuby986 for their open source project for RomControl.
@AbrahamGC for some ideas samsungvn htcmania & 4PDA for tips and some stock apks.
AbrahamGC and Anan1211 for Secure folder and s-health A12 ianmacd for TWRP @Arteush for bluetooth fix (losing BT pair on reboot) on Android Q, aka_vkl for Dolby digital, kdrag0n for SafetyNet fix @Winb33 for custom font pack
XDA:DevDB Information
N986B I Dr.Ketan ROM , ROM for the Samsung Galaxy Note 20 Ultra
Contributors
dr.ketan, Dr.Ketan
ROM OS Version: Android 13
ROM Kernel: Stock (pre-rooted). Source code (samsung) here
ROM Firmware Required: Stock Samsung
Version Information
Status: Stable
Created 2020-08-27
Installation and Download aand Notes
Important :
- This will void warranty.
- As of now you will lose Samsung Pay and Samsung Pass forever if you root once, even unrooting won't help. (hope in future we can get it working on tripped knox device)
- OTA won't work once you root device.
- ROM Tool permission : Files & media - To save and read files, Calendar - Tool needs some time monitoring to avoid using RT immediately after reboot. Special access for accessibility service - Since Android 12 it requires for QS panel custom Toggl e.g. Reboot to recovery
Installation :
Read ChangeLog post for Installation instructions (link on post #3)
PS : Who can handle consequences of dirty flashing, they never need to ask this question in forum. If you dirty install then handle it yourself .
Download : https://drketanrom.com/
ChangeLog
Android Q
- Q01 - 27.08.2020 - Initial release
- Q02 - Only Test release
- Q03 - 11.09.2020
- Q04 - 21.09.2020
- Q05 - 10.10.2020
- Q06 - 11.10.2020
Android R(Beta)
- RB1 - 27.10.2020
- RB2 - 29.10.2020
- RB3 - 06.11.2020
- RB4 - 12.11.2020
- RB5 - 04.12.2020
Android R (Stable)
- R01 - 19.12.2020
- R02 - 06.01.2021
OneUI 3.1
- R03 - 19.02.2021
- R04 - 15.03.2021
- R05 - 27.03.2021
- R06 - 02.05.2021
- R07 - 12.06.2021
- R08 - 10.07.2021
- R09 - 14.08.2021
- R10 - 09.09.2021
- R11 - 17.10.2021
- R12 - 08.11.2021
Android S (A12) OneUI 4.0 (Beta)
- SB1 - 16.11.2021
Android S (A12) OneUI 4.0 (Stable)
- S01 - 30.12.2021
- S02 - 18.01.2022
- S03 - 31.01.2022
- S04 - 06.02.2022
Android S (A12) OneUI 4.1
- S05 - 20.03.2022
- S06 - 16.04.2022
- S07 - 17.05.2022
- S08 - 13.06.2022
- S09 - 14.07.2022
- S10 - 08.08.2022
- S11 - 28.09.2022
Android T(A13) OneUI 5.0
- T01 - 11.11.2022
- T02 - 19.12.2022
- T03 - 23.01.2023
- T04 - 09.02.2023
Android T(A13) OneUI 5.1
- T05 - 21.02.2023
- T06 - 16.03.2023
- T07 - 24.04.2023
- T08 - 14.05.2023
- T09 - 24.06.2023
How to report bugs/Issue?
To report issue, you needs to provide following informations, else it will be ignored. Also if your query is already mentioned on OP/ChangeLogg post, it will be ignored.
1.ROM build number.
2.Dirty/Clean Install. - If you have dirty installed, Then first clean install and report if issue persists.
3.Bug/Issue appears right after installing or later?
4.How to reproduce error.
5.Is there any same reports there on thread on your searching?
6.Is there any mention about same bug on OP or changeLog post?
7.Logs - Attach logs here/Upload to other places where it can be downloaded without registration and doesn't have ad (we recommend dropbox/Gdrive) and post link.
Click to expand...
Click to collapse
Bootloader & Modem..
Reserved
Wow! That was fast! Nice work!!
Hey Ketan !!! I received my note 20 3 days ago but i didn't open it until you release your ROM. I will try it tonight. Thanks very much for your work !!!!
Talderon said:
Wow! That was fast! Nice work!!
Click to expand...
Click to collapse
sayou94 said:
Hey Ketan !!! I received my note 20 3 days ago but i didn't open it until you release your ROM. I will try it tonight. Thanks very much for your work !!!!
Click to expand...
Click to collapse
Thnk you guys for love & support you always shower!
Let me complete instructions and my website for download link.
When a new version of the Rom comes out, can you just flash it over the old one?
ChangeLog Q01 For N986B
- Based on N986BXXU1ATH3 1Aug security patch
ROM features are same as mention on Post #1
Some Important things to note -
This ROM is tested only on N986B If any N985 users want to test, can try on your own risk. Report outcome and I may try to fix.
TWRP is Included in ROM itself. Credit & Thanks to Geiti for TWRP
This is first version and needs to flash using Odin, subsequent version may have different scenario. Read Installation guide below for details
This is first release, There may be more fix/features there in subsequest releases.
Recommended Installation Steps
Requirement :
- Rooted N986B based on Aug security patch
- It is must to have root using Full AP Magisk + Patched kernel shown on this thread. If you have rooted with only patched kernel then you must first root with full AP magisk patch file + Patched kernel as shown on linked thread.
- Odin 3.14.4 or above
Installation :
- Backup your data, this procedure will erase all data including Int storage.
- Download N986B_DrKetan_ROM_Q0*.zip and extract to PC
- Boot device to download mode (Switch Off device - Keep holding Vol Up + Down & connect to PC with USB)
- Open Odin - Disable Auto Reboot in Option
- Click AP tab and navigate to file you have downloaded & extracted N986B_DrKetan_ROM_Q0*.tar.md5
- Click Start and when it completes, disconnect mobile and keep holding Vol down+Side Key for 7 sec, as soon as device screen goes off, use combo key to reboot to recovery
- Now you will have TWRP - Select Wipe - click FORMAT DATA - You need to type "yes" to continue
- When finish, Reboot to system
ROM specific Instructions.
Once device boot to android, straightway do following things before setting up device further
Check Magisk Manager is installed. If there, Open it and complete environment setup (Device must be connected to internet) - Reboot. In case Magisk Manager not installed, get latest stable from magisk gut hub and install manually and follow as said.
Open Magisk, settings - enable magisk hide. Also recommended to turn of supersu notification while setting up.
Open ROM Tool - It will ask to Apply Essential Fix, Complete it and Reboot.
Now you can set up your device as per your desire. Enjoy!
Tips, Add On & Fix
- Stuck while flashing something (Bootloop), How can I reboot to download
There is a golden rule that always works when you stuck anywhere (bootloop). Follow this -
1.Plugin device to PC
2.Keep holding power + vol down
3.As soon as screen goes blank, keep holding vol up + vol down (here you needs to be quick)
And you are in download mode.
- EdXposed You can directly install from Magisk download repositories
- Unable to login to samsung ac : I have observed recently in one condition, restoring a backup that includes samsung acc. I have encountered this once and fixed by installing Samsung Members and logged in with that. By using this app, it showing "your session is expired login again" after this it was worked. Another possibility is, few users have reported some version of custom kernel was causing issue with samsung acc.
- Read ROM Tool - Update & Fix if any new available.
Download and other instructions available in post #2
This is a customized ROM and for end users only, ROM or any part of ROM/mods not allowed to redistribute,modify or to use as base to prepare new ROM/ part of other ROM.
How to report bugs/Issue?
To report issue, you needs to provide following informations, else it will be ignored. Also if your query is already mentioned on OP/ChangeLogg post, it will be ignored.
1.ROM build number.
2.Dirty/Clean Install. - If you have dirty installed, Then first clean install and report if issue persists.
3.Bug/Issue appears right after installing or later?
4.How to reproduce error.
5.Is there any same reports there on thread on your searching?
6.Is there any mention about same bug on OP or changeLog post?
7.Logs - Attach logs here/Upload to other places where it can be downloaded without registration and doesn't have ad (we recommend dropbox/Gdrive) and post link.
Click to expand...
Click to collapse
Thanks for keeping patience.
Wow already
Love your rom on note9
dr.ketan said:
Thnk you guys for love & support you always shower!
Let me complete instructions and my website for download link.
Click to expand...
Click to collapse
Im back to note series and back to stable as rock Dr. Ketan Rom
do you think to do the rom also xnka variant 988b?
Dr.Ketan Going to install your Awesome Hatd work Rom and if any bugs will report my bro. Thanks bro.
Tekkamen77 said:
do you think to do the rom also xnka variant 988b?
Click to expand...
Click to collapse
Extract CSC_*.tar.md5 file from your stock ROM and send it to me, I will look into it.
beautyangel said:
Dr.Ketan Going to install your Awesome Hatd work Rom and if any bugs will report my bro. Thanks bro.
Click to expand...
Click to collapse
It will be available in few minutes. Thanks.
dr.ketan said:
Extract CSC_*.tar.md5 file from your stock ROM and send it to me, I will look into it.
It will be available in few minutes. Thanks.
Click to expand...
Click to collapse
thank you for answering me if you tell me how I can do it
Tekkamen77 said:
thank you for answering me if you tell me how I can do it
Click to expand...
Click to collapse
You needs to download stock firmware from frija or samfirm tool, use 7zip to extract said file. Upload to goole driver or similar and send me link.
dr.ketan said:
You needs to download stock firmware from frija or samfirm tool, use 7zip to extract said file. Upload to goole driver or similar and send me link.
Click to expand...
Click to collapse
ok okay .. thanks
Not rooting this time round. But thanks for all your work for this device.
Q01 is online now!
.

Categories

Resources