Just purchased a 7t pro used only 4 months old , now i have had a 7 pro and a 7T oneplus mobile before. The fingerprint sensor on lockscreen is not recognised most of the times . Tried changing fingerprints by putting more than 3 , also have hard reset it and used unbrick tool to downgrade to 10.0.8 That did not work also. wipe cached basically tried everything also taken of screen protector .
I have given now thinking it has to be a faulty sensor.
Anyone else has had same problem and maybe know a way to sort it out
pro4ever said:
Just purchased a 7t pro used only 4 months old , now i have had a 7 pro and a 7T oneplus mobile before. The fingerprint sensor on lockscreen is not recognised most of the times . Tried changing fingerprints by putting more than 3 , also have hard reset it and used unbrick tool to downgrade to 10.0.8 That did not work also. wipe cached basically tried everything also taken of screen protector .
I have given now thinking it has to be a faulty sensor.
Anyone else has had same problem and maybe know a way to sort it out
Click to expand...
Click to collapse
Do the finger print on the same finger 2or3 times that should help
No issues here, i have only one fingerprint setup.
Works perfect and haven't had a mismatch ever.
jaythenut said:
Do the finger print on the same finger 2or3 times that should help
Click to expand...
Click to collapse
Tried that also its still very hit and miss . Also tried on some of my family , same there hit and miss
I had similar issues but in relation to my second thumb. (I only use thumbs to unlock). The right one worked just fine. The left one was hit or miss. Now it works much better. I can say it'stable .
The best way to configure fingerprint was in my case: 1) try to cover reader area by moving finger little bit, small steps are the best 2) try to configure fingerprint when you actually hold the phone. The angle and the position of the touching finger when you hold it and try to unlock is basically not always the same when your device rests on a flat surface. I think it's worth a shot.
Moreover reader area can be dirty or greasy/and so can be finger. Try to wipe it, and then try lock/unlock couple of times.
I got the impression FR has "learnt" both fingers and it's much much better now. Right finger precision is 9/10 and left one is like 7-8/10.
That is what i dont get its not like i have not had a oneplus device before . but this one seems to be hit and miss, where else others for me was instant
I used devices with analog fingerprint readers and they were instant indeed. In-screen scanners are getting better too. I've owned P40 Pro for a month and I must say that it was almost no difference compared to the analog one - blazing fast and high precision. The one on OP7T pro is not as good (well it's not as modern either), but when you find solution to set it up properly you'll be satisfied. Mine works really good now. Best of luck!
Sent it back now looking for another one
forever_lol said:
I had similar issues but in relation to my second thumb. (I only use thumbs to unlock). The right one worked just fine. The left one was hit or miss. Now it works much better. I can say it'stable .
The best way to configure fingerprint was in my case: 1) try to cover reader area by moving finger little bit, small steps are the best 2) try to configure fingerprint when you actually hold the phone. The angle and the position of the touching finger when you hold it and try to unlock is basically not always the same when your device rests on a flat surface. I think it's worth a shot.
Moreover reader area can be dirty or greasy/and so can be finger. Try to wipe it, and then try lock/unlock couple of times.
I got the impression FR has "learnt" both fingers and it's much much better now. Right finger precision is 9/10 and left one is like 7-8/10.
Click to expand...
Click to collapse
Exactly the same, i dont know whats wrong wirh my left thumb
pro4ever said:
Just purchased a 7t pro used only 4 months old , now i have had a 7 pro and a 7T oneplus mobile before. The fingerprint sensor on lockscreen is not recognised most of the times . Tried changing fingerprints by putting more than 3 , also have hard reset it and used unbrick tool to downgrade to 10.0.8 That did not work also. wipe cached basically tried everything also taken of screen protector .
I have given now thinking it has to be a faulty sensor.
Anyone else has had same problem and maybe know a way to sort it out
Click to expand...
Click to collapse
I had this issue just after 4 days of buying. 90% of times my 7T Pro would not recognize the fingerprint. I submitted my device to the service center thrice, even showed them the video recordings of sensor being faulty and they kept telling me that its a software glitch. Well I approached them and literally yelled at them when the issue occurred the 4th time. They changed some hardware component in front of me which is related to the fingerprint and the issue was resolved. Turned out I was right the whole time and they apologized to me. So trust me, it is the hardware issue and you need to get some hardware part changed in your phone. Go with the video recording if you have to and do not leave the service center until they replace the component. We also do not need to factory reset the phone for this so just say NO for factory reset. God knows why service center executives in India always suggest factory reset as the first option to every problem. Hope this helps.
Sumedh Pendse said:
God knows why service center executives in India always suggest factory reset as the first option to every problem. Hope this helps.
Click to expand...
Click to collapse
Because they do not have any respect for other people's time. Just like the giant bank .. where it's a culture to ask you to come next day ( which never comes by the way ).
hyperorb said:
Because they do not have any respect for other people's time. Just like the giant bank .. where it's a culture to ask you to come next day ( which never comes by the way ).
Click to expand...
Click to collapse
I think the reason is that many issues can be resolved by factory resetting. That it doesn't apply to a lot of situations is the issue with that.
But their philosophy is that if 50 percent of issues can be resolved by factory resetting, they have more resources than if they guide you through 500 steps until a factory reset becomes the only option.
That's why XDA comes in handy
That's actually kind to say but it's a notion to pickup the easiest ( even if it may not be correct ) way.
hyperorb said:
That's actually kind to say but it's a notion to pickup the easiest ( even if it may not be correct ) way.
Click to expand...
Click to collapse
But this is the same approach by every company. Even at an Apple Store you are presented the easiest option and every other step until you finally get a physical repair.
Just like you rarely get objective advise at a retail store. You are pushed towards a higher priced product so the seller profits from it.
You will never go to an Apple Store just to let the staff tell you a Nokia is cheaper and better for your needs.
Related
Hey guys, I just got my touch pro last week and now the keyboard wont work. No drops or water damage. It wont light up or anything. I dont want to have to go back to the sprint store, so if u guys have any suggestions that would be awesome. Thanks.
Sorry
I hate to be the bearer of bad news, but I had the same thing happen to me. I spent probably a combined total of 8 hours on the phone with different people before I got any kind of solution. I couldn't find anything online. I was out of the initial Sprint Warranty. So Sprint said, sorry, you're gonna have to pay for a whole new device. That wouldn't work, the device was just 3 months old. So I called HTC, and at first they said there was nothing they could do either, until I talked to one person who forwarded me to PCD. They were able to fix it, for free under warranty, they replaced some RFID tag (IDK what that meant, it was in this checklist of tests they sent back) and sent the phone back. All I had to pay was shipping to their Repairs center. The bad thing was, it took them 3 weeks to work on it (only 4 days were shipping there and back). I hope I have been helpful, and I am sorry about the bad news. I know the feeling.
Hey, i had the same problem but i went to sprint and change my device, the new one works perfect, my advice go back and change it.
Bigswigg said:
Hey guys, I just got my touch pro last week and now the keyboard wont work. No drops or water damage. It wont light up or anything. I dont want to have to go back to the sprint store, so if u guys have any suggestions that would be awesome. Thanks.
Click to expand...
Click to collapse
i had the same problem i went to sprint and change my device, the new one works perfect, so my advice go back to the store and replace it for a new one, take care......
Not much but maybe
Had one that same thing happened. Performed hard reset and corrected it maybe temp fix though but it worked so far about a week of good use so far.
I had the same thing on my Verizon Pro, what I found was (I took mine apart) was that the cable had came loose from it's connector, I just had to reseat it and works perfect. By the way I bought it that way (got a great deal because it didn't work).
kilroy1stcav said:
I had the same thing on my Verizon Pro, what I found was (I took mine apart) was that the cable had came loose from it's connector, I just had to reseat it and works perfect. By the way I bought it that way (got a great deal because it didn't work).
Click to expand...
Click to collapse
I have the same keyboard problem...it doesn't work most of the time, but once in a blue moon it will....the keyboard lights come on, but no input from keys work....so is that still a connector issue you think? Did you keyboard backlight come on?
2nd question: How do I open my TP?
Thanks.
Here's a link with the Touch Pro teardown, thanks to BigDiesel07 @ PPCGeeks. Hope this helps a bit...
http://forum.ppcgeeks.com/showthread.php?t=49932&highlight=teardown+touch+pro
G00gle26 said:
I have the same keyboard problem...it doesn't work most of the time, but once in a blue moon it will....the keyboard lights come on, but no input from keys work....so is that still a connector issue you think? Did you keyboard backlight come on?
2nd question: How do I open my TP?
Thanks.
Click to expand...
Click to collapse
I am not sure if my keys lite up or not, it has been a while, but it sounds to me like a possible connection issue with it being intermittent.
happened to me twice hopefully tp2 fixes this little issue.
same problem!!! just go to sprint, they can fix the problem... "they changed my keyboard"!!!
yah me too, i took my touch pro back to Sprint and they changed the whole touch screen part of the phone for me in 45 mins and for some reason that fixed the keyboard as well, so i guess the problem is in the touch-screen part of the phone, not the keyboard itself
Try this. Take out the battery and pinch extremely hard on the space button to re-seat the keyboard cable.
I'm not completely sure if it will work as I got my phone replaced before I found this fix.
Try it and let me know if it helped any.
zKnuckles said:
Try this. Take out the battery and pinch extremely hard on the space button to re-seat the keyboard cable.
I'm not completely sure if it will work as I got my phone replaced before I found this fix.
Try it and let me know if it helped any.
Click to expand...
Click to collapse
Genius! However, i am not. Your solution worked, however i fear it may be a temporary solution? I want to get this fixed while under warranty and dumb ol' me fixing it, well, now i won't have anything to show the sprint store
zKnuckles said:
Try this. Take out the battery and pinch extremely hard on the space button to re-seat the keyboard cable.
I'm not completely sure if it will work as I got my phone replaced before I found this fix.
Try it and let me know if it helped any.
Click to expand...
Click to collapse
this worked for me! thanks!!! I was getting ready to open up the phone or go to the sprint store. You the man.
this is a very common problem because this also hppened to me.
the represenstative told me that putting on 3rd party software can help the keyboard going out
USAF22 said:
I hate to be the bearer of bad news, but I had the same thing happen to me. I spent probably a combined total of 8 hours on the phone with different people before I got any kind of solution. I couldn't find anything online. I was out of the initial Sprint Warranty. So Sprint said, sorry, you're gonna have to pay for a whole new device. That wouldn't work, the device was just 3 months old. So I called HTC, and at first they said there was nothing they could do either, until I talked to one person who forwarded me to PCD. They were able to fix it, for free under warranty, they replaced some RFID tag (IDK what that meant, it was in this checklist of tests they sent back) and sent the phone back. All I had to pay was shipping to their Repairs center. The bad thing was, it took them 3 weeks to work on it (only 4 days were shipping there and back). I hope I have been helpful, and I am sorry about the bad news. I know the feeling.
Click to expand...
Click to collapse
go to your phone carrier.
demand a NIB replacement. (new in box)
it states in the manufacturing warranty that you get a NIB replacement for the keyboard. it's a known problem, tell them to call the tech department or htc tech support and they will tell the rep the same thing.
Don't leave without a NEW replacement.
Don't take a refurb(mailed out) replacement.
throwback1718 said:
this is a very common problem because this also hppened to me.
the represenstative told me that putting on 3rd party software can help the keyboard going out
Click to expand...
Click to collapse
hahahahahha.
I call BS on that one. lol.
I did it... removed bat', piched key b'. it now works... eeeeeeeeyesss
Got a 0 hour touch pro less than 2months, keyboard started lagging since 2 weeks ago, then extra spaces and duplicate letters and finally died after a charging session in a hot weather day.
Removed battery and press spacebar top and bottom very hard to resit the keyboard connector fixed the issue.
Same happened to me on my Alltel CDMA Touch Pro after having owned it for about 4 weeks. It would also not shut off the screen backlight. Was very odd. Luckily, my Alltel store is literally across the alley from my house, so I ran a full backup using Sprite Backup, walked over there, and they swapped it out for a new phone within 10 minutes. Took me another 45 minutes to restore the backup, but wasn't nearly as bad as sending it away for several weeks to be repaired.
Does anyone have the problem where scrolling isnsiepr fast and scrolling is also only nice when their finger in flat on the screen and morning an angle? When I use my left thumb, in an angle it sometimes doesn't scroll proeprly and instead moves very little. It's very annoying.
Yes i have this. It's caused by input lag very high on this Phone !
Yes its horrible..Can not understand that they sell it with such issues and call it master of speed.
Will send it Back in monday
LOL
another fake topic
Why Fake?
This is happening with me 2. Is it hardware issue? Or should I replace it?
Bad news http://en.miui.com/thread-3746297-1-1.html this smartphone is very bad !
I can use this phone through gloves.
I've kind of made the problem go away. Idk if it's a placebo and I've gotten used to it. But I'll end the thread and start another one to state what I've done. You can give me feedback there.
bronze900 said:
I've kind of made the problem go away. Idk if it's a placebo and I've gotten used to it. But I'll end the thread and start another one to state what I've done. You can give me feedback there.
Click to expand...
Click to collapse
I also have the exact problem. The phone suddenly stops responding to some of the touches be it tap or swipe. Then after sometime it responds to all of the touches. How did you fix it?
Sent from my POCO F1 using Tapatalk
dbzgoku said:
I also have the exact problem. The phone suddenly stops responding to some of the touches be it tap or swipe. Then after sometime it responds to all of the touches. How did you fix it?
Click to expand...
Click to collapse
I didn't have something that extreme. But it seems better for me after I turned off mi optimisation in the developers options. Also go to extra settings and pick authorisation. I turned everything off and left settings. I'm about to root my phone as it has been nearly 3 days. There should be a fix in the Mi forums somewherem
I think I made a right decision to buy the Honor Play Player Edition instead of Poco F1, lots of complaints everywhere!
motherninja said:
I think I made a right decision to buy the Honor Play Player Edition instead of Poco F1, lots of complaints everywhere!
Click to expand...
Click to collapse
Noob?
I'm a lucky noob... Sorry you got tricked by xiaomi...
yea too many bugs, i am facing this issue as well, touch is really bad, there are times( i may be wrong) but the screen responds even when i hover my finger on it, it has happened quite a few times now
motherninja said:
I'm a lucky noob... Sorry you got tricked by xiaomi...
Click to expand...
Click to collapse
Ermmm maybe you got trick by honor cheating benchmarks
motherninja said:
I think I made a right decision to buy the Honor Play Player Edition instead of Poco F1, lots of complaints everywhere!
Click to expand...
Click to collapse
LOL I have the global version here in Italy and the phone is PERFECT. No one complaints about it. You can check. It's a great phone. Here are all happy about Poco.
nISTHUR said:
yea too many bugs, i am facing this issue as well, touch is really bad, there are times( i may be wrong) but the screen responds even when i hover my finger on it, it has happened quite a few times now
Click to expand...
Click to collapse
Yes. For me it's a functionality rather than a bug. It allows me to use the screen even with gloves on. Also the response will normalise if you install a tempered glass.
lockhrt999 said:
Yes. For me it's a functionality rather than a bug. It allows me to use the screen even with gloves on. Also the response will normalise if you install a tempered glass.
Click to expand...
Click to collapse
I installed tempered glass from the 1st day and getting touch issues. I thought it is software bug. Like, if I swipe left or right and it works as swipe up or down.
Mi post about their miui 10 beta 2, their is written that ghost and multi touch problem will be solved. If miui beta 2 solved these issues then I will install it manually. https://en.miui.com/thread-3935216-1-1.html
I post about the touch issues to poco India in twitter and they replied me to DM to us with contact number and miui version of my device, our team will call you.
Lets see, will they call or not.
maxmog said:
Yes its horrible..Can not understand that they sell it with such issues and call it master of speed.
Will send it Back in monday
Click to expand...
Click to collapse
Try miui 10 it doesn't need anything
Not even a bootloader unlocking just download and flash
I'm having the dreaded touch lag issue on my poco device.
I've sent it back for repair or refund but they refuse to do anything since the touch tests pass.
I tried explaining them my previous 3 years old device is fine and that the poco which is much newer and faster should do this and they don't listen to me, they say that the device is working like the manufacturer intended for it to work.
So, can anyone record a video?
It should only take 2-3 minutes to record and upload. Do it in 480p it doesn't matter as long as it shows the issue.
There are 2 ways to do it, the correct way, and the fast way, I'll write both.
1) Go to about phone, kernel version, tap a few times then CIT testing app will open. (if it doesn't open try again)
Then go to the top right and press the three dot menu, then additional tools, then touch sensor.
Then tap really fast on the edges of the display. If your device is working as intended the touches should all be registered.
2) Download realdrum, and tap really fast on the below drums on the edge of the display, If your device is working as intended the drums should register all the inputs without missing.
Again it's urgent, so I could use all the help I can.
Thank you.
Did you tried your device without a case? I read about cases doing this issued.
darkgizmo said:
Did you tried your device without a case? I read about cases doing this issued.
Click to expand...
Click to collapse
Yes I have.
No change.
Is your device working correctly?
Could you upload a video?
Here's an example video of what the problem looks like.
Ignore that the language is not english, the video was recorded for the shop to see.
https://1drv.ms/v/s!Alh2bAGk6Iy4hQ5-Dc6Tu3UgRQzi
I feel for you. All the 7 pocophone I have tried have this annoying issue. I've complained and asked people about it, and who claims that theirs is working fine is either using Swiftkeyboard (which isn't as fast as Gboard), or simply doesn't know how to test this properly. Maybe they just don't notice it at all, but I doubt there's a single pocophone without this bug, and this is what made me give up on the phone.
v.redd.it/z0ph2ff4eys11
Here's what you probably need.
rylark said:
I feel for you. All the 7 pocophone I have tried have this annoying issue. I've complained and asked people about it, and who claims that theirs is working fine is either using Swiftkeyboard (which isn't as fast as Gboard), or simply doesn't know how to test this properly. Maybe they just don't notice it at all, but I doubt there's a single pocophone without this bug, and this is what made me give up on the phone.
v.redd.it/z0ph2ff4eys11
Here's what you probably need.
Click to expand...
Click to collapse
Jesus christ 7 pocophones?
Wow.
God damn it Xiaomi, how can they release a faulty device and take no responsibility for it?
Samsung went ahead and recalled all the Note 7s that had the battery issue, a much more expensive and higher selling device.
nfsmw_gr said:
Jesus christ 7 pocophones?
Wow.
God damn it Xiaomi, how can they release a faulty device and take no responsibility for it?
Samsung went ahead and recalled all the Note 7s that had the battery issue, a much more expensive and higher selling device.
Click to expand...
Click to collapse
2 returned from a retail store, 2 from amazon, 1 that I tried from a store and 2 more from friends of mine. It's absurd how bad their quality control is. They claim that it's software, just like they claimed the screen bleeding was part of the phone. They're a ****ing joke.
Do you have a screen protector on , or to be more specific, a tempered glass one with the black band? If so this is your issue because the black band is slight raising the contact. Have you tried pressing the device harder to see it it registers?
betterthanjordan79 said:
Do you have a screen protector on , or to be more specific, a tempered glass one with the black band? If so this is your issue because the black band is slight raising the contact. Have you tried pressing the device harder to see it it registers?
Click to expand...
Click to collapse
No screen protector, pressing harder doesn't affected the usage.
Most of the units if not all have this problem, I canceled my order for this phone recently and I'm glad that I did. Xiaomi had to save on something and they did, sadly on the screen. Screens from tianma are known for their not very good quality ( rumors say that they catch afterimages after time ) and it feels bad that it turned out that this phone is a big no no. Screen is a numero uno thing when it comes to a phone, damn u look and type on it so despite the great specification this phone is a crap. People all over miui forum write threads that their pocophones have input lag and ghost touches. Xiaomi knows about it and since a month clam that they gonna fix it via ota updates. Let me tell you something they won't. It's not possible to fix it because it's a faulty digitizer that causes the problem which is obviously a part of the hardware. That's what happens when you try to rock the world with the best spec budget smartphone and u cut costs in the lcd panel area. With all that being said, don't fall for this phone. If you look for the good phone for 300 bucks then better option imo is for example Lg g6. Don't get fooled and stay open minded guys, peace.
exdeee said:
Most of the units if not all have this problem, I canceled my order for this phone recently and I'm glad that I did. Xiaomi had to save on something and they did, sadly on the screen. Screens from tianma are known for their not very good quality ( rumors say that they catch afterimages after time ) and it feels bad that it turned out that this phone is a big no no. Screen is a numero uno thing when it comes to a phone, damn u look and type on it so despite the great specification this phone is a crap. People all over miui forum write threads that their pocophones have input lag and ghost touches. Xiaomi knows about it and since a month clam that they gonna fix it via ota updates. Tell me tell you something they won't. It's not possible to fix it because it's a faulty digitizer that causes the problem which is obviously a part of the hardware. That's what happens when you try to rock the world with the best spec budget smartphone and u cut costs in the lcd panel area. With all that being said, don't fall for this phone. If you look for the good phone for 300 bucks then better option imo is for example Lg g6. Don't get fooled and stay open minded guys, peace.
Click to expand...
Click to collapse
I completely and totally 100% agree with you.
Just waiting right now to get my refund.
I'll most likely get the OP6/T.
I dont have this issue. - using MIUI10 8.10.11
nfsmw_gr said:
I completely and totally 100% agree with you.
Just waiting right now to get my refund.
I'll most likely get the OP6/T.
Click to expand...
Click to collapse
Good decision, refund this crappy phone and get something better. When it comes to me xiaomi just lost a supporter and follower, once Hugo Barra left xiaomi everything started to fall apart ( mi mix 2/2s are not as revolutionary as the first mi mix was or the mi 8 which is nothing else than a iphone x copy ). It's always good to wait and see the very first 3 months after a phone release, usually after this time most of the fails/cons come out. Have a good day anyways
exdeee said:
Most of the units if not all have this problem, I canceled my order for this phone recently and I'm glad that I did. Xiaomi had to save on something and they did, sadly on the screen. Screens from tianma are known for their not very good quality ( rumors say that they catch afterimages after time ) and it feels bad that it turned out that this phone is a big no no. Screen is a numero uno thing when it comes to a phone, damn u look and type on it so despite the great specification this phone is a crap. People all over miui forum write threads that their pocophones have input lag and ghost touches. Xiaomi knows about it and since a month clam that they gonna fix it via ota updates. Let me tell you something they won't. It's not possible to fix it because it's a faulty digitizer that causes the problem which is obviously a part of the hardware. That's what happens when you try to rock the world with the best spec budget smartphone and u cut costs in the lcd panel area. With all that being said, don't fall for this phone. If you look for the good phone for 300 bucks then better option imo is for example Lg g6. Don't get fooled and stay open minded guys, peace.
Click to expand...
Click to collapse
Just tried using CIT as well as really drums. Problem has been solved in latest beta 8.10.18
U can try and confirm. Scrolling on the edges is also smooth now and even keyboard is working fine.
exdeee said:
Good decision, refund this crappy phone and get something better. When it comes to me xiaomi just lost a supporter and follower, once Hugo Barra left xiaomi everything started to fall apart ( mi mix 2/2s are not as revolutionary as the first mi mix was or the mi 8 which is nothing else than a iphone x copy ). It's always good to wait and see the very first 3 months after a phone release, usually after this time most of the fails/cons come out. Have a good day anyways
Click to expand...
Click to collapse
Again you are right.
I became impatient with my old phone and that got the better of me.
Will keep those words at mind next time.
Have a good day as well pal.
sanjay0501 said:
Just tried using CIT as well as really drums. Problem has been solved in latest beta 8.10.18
U can try and confirm. Scrolling on the edges is also smooth now and even keyboard is working fine.
Click to expand...
Click to collapse
Well, it doesn't change the fact that lcd panels in pocophones are poor quality. I don't really believe that they managed to fix it via updates, only time will tell after let's say a month if the problem is fixed. I don't think that it will, it's better to send the phone back, get ur money and wait. There are way better options for example the aforementioned one plus 6.
Working fine for me
For me it is working fine. I can't see the blue line which show the position but the touch is working fine even when I tap it fast. The touch is always registered without the blue lines. You can always see a red dot where you touched.
exdeee said:
Well, it doesn't change the fact that lcd panels in pocophones are poor quality. I don't really believe that they managed to fix it via updates, only time will tell after let's say a month if the problem is fixed. I don't think that it will, it's better to send the phone back, get ur money and wait. There are way better options for example the aforementioned one plus 6.
Click to expand...
Click to collapse
If u own the phone try stable 9.6.25 ( I haven't tried) or beta 8.10.18 ( I have tried with all types of tests) and then comment
sanjay0501 said:
If u own the phone try stable 9.6.25 ( I haven't tried) or beta 8.10.18 ( I have tried with all types of tests) and then comment
Click to expand...
Click to collapse
And you try to understand smart boy that input lag is related to a hardware problem not a software problem, go and check by the way miui forums. There are plenty of people commenting that 9.6.25 didn't fix a thing.
exdeee said:
Well, it doesn't change the fact that lcd panels in pocophones are poor quality. I don't really believe that they managed to fix it via updates, only time will tell after let's say a month if the problem is fixed. I don't think that it will, it's better to send the phone back, get ur money and wait. There are way better options for example the aforementioned one plus 6.
Click to expand...
Click to collapse
Fyi op6 screen has high latency as well
I've had my share of grief with the fingerprint sensor on my Pixel 6, but it's totally usable and I was generally fine with it. Until I realised yesterday that all that oh-so complex and safe AI security procedure that allegedly makes the sensor so slow is complete bs.
I was sitting next to a friend who had never used an in-screen fingerprint sensor before and he wanted to mess around with it. After like 5 seconds he unlocked the phone. His left thumb was accepted by the phone. I was in utter shock. He was able to unlock the phone every single time without any problems whatsoever. So I thought ok, this might be rare, but there is a tiny chance that two people have very similar fingerprints. But needless to say, I was not able to unlock his iPhone with my fingerprint.
I have a few things that I dislike about the Pixel, but this safety concern feels major to me.
This has been recently publicised. There is a chance that other people may be able to unlock your 6.
freeflyer said:
This has been recently publicised. There is a chance that other people may be able to unlock your 6.
Click to expand...
Click to collapse
it sure has been reported before but seeing it from others with the simplicity to bypass it is not just scary but hopefully embarrassing for Google and I hope they fix this.
freeflyer said:
This has been recently publicised. There is a chance that other people may be able to unlock your 6.
Click to expand...
Click to collapse
Wow, hadn't heard about that yet. In the past I've heard that those simple face unlocks can be tricked by as little as a picture of someone, but I always thought fingerprint sensors would be precise and safe. Well, leave it to google to mess it up I guess.
I thought google hardware would be worth something in 2021, but this phone does not feel good at all.
Scary potential security problems indeed...
Did you have Smart Lock enabled? Did it actually scan the finger (i.e. did it get really bright on that part of the screen). The screen shows the fingerprint icon even when the phone is unlocked.
I didn't realise it was unsafe as well as being completely useless.
I have a use my pin to unlock it 50% of the time.
It also uses a CCD (i.e. camera) to read the fingerprint, so in theory, a picture of your finger should trick it into unlocking.
I eagerly installed the Dec 2021 update on my Pixel 6 a couple of weeks back - hoping to improve the FP pass rate.
But I am convinced its gotten worse.
It seemed better at first - but soon deteriorated...
Since the update, whilst it still unlocks on the 1st attempt occasionally, I am finding far more instances where it completely fails to recognise my FP and I am forced to put my PIN number in to unlock.
Prior to the update, it would unlock more often on the 1st attempt - otherwise it may have taken 2-3 attempts to unlock and very rarely I would have to enter the PIN.
Same here! adding more of the same finger did not help!
It was better or about the same from 13/12 until 25/12, and now I hardly can use it. have to enter password all the time.
harryw66 said:
I eagerly installed the Dec 2021 update on my Pixel 6 a couple of weeks back - hoping to improve the FP pass rate.
But I am convinced its gotten worse.
It seemed better at first - but soon deteriorated...
Since the update, whilst it still unlocks on the 1st attempt occasionally, I am finding far more instances where it completely fails to recognise my FP and I am forced to put my PIN number in to unlock.
Prior to the update, it would unlock more often on the 1st attempt - otherwise it may have taken 2-3 attempts to unlock and very rarely I would have to enter the PIN.
Click to expand...
Click to collapse
I am not sure where you are located geographically, but in the northern hemisphere it is now winter. As such the overall humidity levels (particularly indoors) tends to be very low and skin is drier. What you may be seeing is your skin seasonally drying out - and the P6 is terrible at reading dry fingerprints.
chaimav said:
I am not sure where you are located geographically, but in the northern hemisphere it is now winter. As such the overall humidity levels (particularly indoors) tends to be very low and skin is drier. What you may be seeing is your skin seasonally drying out - and the P6 is terrible at reading dry fingerprints.
Click to expand...
Click to collapse
can confirm, i live in Vermont and the finger print reader takes 4-6 times to register..everytime. used to do it in 1-2 before the temp dropped. its by far the most frustrating part of this phone so far.
dehelfix said:
can confirm, i live in Vermont and the finger print reader takes 4-6 times to register..everytime. used to do it in 1-2 before the temp dropped. its by far the most frustrating part of this phone so far.
Click to expand...
Click to collapse
I had a feeling about this - but never had the same issue with my previous OnePlus phones with screen based FP reader.
Also, the back sensor on cheap Oppo phone or basic Nord N100 work fine - unlock first time...
Did anybody here read the other 8+ threads here in the Pixel 6 thread about the finger print reader. ?
Just curious, why no one found any help there....
Not looking for help, just sharing and trying to get an idea of other people's experiences post Dec update.
harryw66 said:
I had a feeling about this - but never had the same issue with my previous OnePlus phones with screen based FP reader.
Also, the back sensor on cheap Oppo phone or basic Nord N100 work fine - unlock first time...
Click to expand...
Click to collapse
Back sensors use different technology than in screen ones.
harryw66 said:
Not looking for help, just sharing and trying to get an idea of other people's experiences post Dec update.
Click to expand...
Click to collapse
I think his point was that there are a half dozen FPR threads already and another is not really needed. Why not find an older one and update that? Wouldn't that make more sense?
Worst FPR ever put on a phone
Ok this is beyond a joke now. Why in the hell would these morons remove face unlock only to add the absolute worst fingerprint reader I've ever dealt with on any phone I've ever owned. I never thought I'd consider going back to pin unlock...
forum.xda-developers.com
Just installed a glass screen protector and FPR won't recognize
I did the steps people have said to do like increase touch sensitivity and re add all the fingers I would use but it still won't work. I don't know who made this protector since I got it off a marketplace site and when I met with the person all...
forum.xda-developers.com
chaimav said:
Back sensors use different technology than in screen ones.
Click to expand...
Click to collapse
As you will note, I mentioned that multiple OnePlus phones with screen based sensors worked fine for me.
I am also aware that back sensors use different tech - the point was that cheapo bottom of the range phones have no problems with fingerprints - so why does my £600 phone not work as well. It's not good enough.
bobby janow said:
I think his point was that there are a half dozen FPR threads already and another is not really needed. Why not find an older one and update that? Wouldn't that make more sense?
Worst FPR ever put on a phone
Ok this is beyond a joke now. Why in the hell would these morons remove face unlock only to add the absolute worst fingerprint reader I've ever dealt with on any phone I've ever owned. I never thought I'd consider going back to pin unlock...
forum.xda-developers.com
Just installed a glass screen protector and FPR won't recognize
I did the steps people have said to do like increase touch sensitivity and re add all the fingers I would use but it still won't work. I don't know who made this protector since I got it off a marketplace site and when I met with the person all...
forum.xda-developers.com
Click to expand...
Click to collapse
Because some are pre update, and some of the post update threads are more concerned with who has received the update and who has not.
Seriously don't understand the problem, I create a thread with a very specific question and suddenly I am took to task for it...woah....
No problem in the fingerprint department for me since Dec update. It is almost perfect now. Very rare to get failed reads.
If only I had some cell signal though
harryw66 said:
As you will note, I mentioned that multiple OnePlus phones with screen based sensors worked fine for me.
I am also aware that back sensors use different tech - the point was that cheapo bottom of the range phones have no problems with fingerprints - so why does my £600 phone not work as well. It's not good enough.
Click to expand...
Click to collapse
Sent it back for a refund.
I would not put up with all the troubles that you are having.
My P6 works good before the December update and after the December update.
As said multiple times in the
other threads.
vandyman said:
Did anybody here read the other 8+ threads here in the Pixel 6 thread about the finger print reader. ?
Just curious, why no one found any help there....
Click to expand...
Click to collapse
Yup so much pixel spam on the same issues over and over lol
vandyman said:
Sent it back for a refund.
I would not put up with all the troubles that you are having.
My P6 works good before the December update and after the December update.
As said multiple times in the
other threads.
Click to expand...
Click to collapse
I would love to - but its been over 2 months since I ordered it. I foolishly hoped that Google would fix it ASAP - and the 1st attempt has been less than satisfactory...Wish I had returned it within the 30 days...
There seems to be some hope of a workaround... Fingerprint Reader tip