Related
HI
I Have Collected info for My Spreadtrum Mobile about model.
Info Collection
Settings > About Phone
Model number
MINI_NOTE_II
Android version
4.0.3
Baseband version
MAUI.11AMD.W11.37.SP.V16
04-02-2012
Kernel Version
2.6.35.7
[email protected]
Software Version
WXJ_K880C_08_V0_4
HARDWARE
1.1.0
Click to expand...
Click to collapse
http://ylt.com/
www.myltmobile.com
Spreadtrum Engineering Mode: *#*#83781#*#*
Boot Logo da Samsung: *#*#555#*#*
Boot Logo Padrão: *#*#556#*#*
Version Info
Plataforma Versão:
MOCOR_880XG_MODEM_W12.32_Debug
Project Version
sc8810_modem
Base Version
DM_BASE_12A_W12.32
HW Version
sc8810_modem,08-09-2012 16:47:10
Click to expand...
Click to collapse
Net Info
SCELL
724,03,520,16
NCELL
724,03,518,7
724,03,638,5
724,03,517,12
Debug Param
Band Select
GSM900 DSC1800 PCS1900 GSM850
Processor ARMv7 Rev 1 v7l
BOGOMIPS 1024.00
Features:
swp half thumb fastmult vfp edsp neon vfpv3
CPU
Implamenter: 0x41
Archtecture: 7
Variant: 0x0
part: 0xC05
revision: 1
Hardware:
Mediatek MT6515
Revision 0101
GPU doenst match
Click to expand...
Click to collapse
Device Hsdroid
Product Sprdroid_base
Display 240x320
Graphics MALI-300
OpenGL ES_CM 1.1
Sensor: AK8975-3-axis Magnectic field
Vendor: Asahi Kasei
Uname -a
Linux Version 2.6.35.8 [email protected] gcc 4.4.3 #6 Sun Apr 28 18:47:17 CST 2013
PAC https://docs.google.com/file/d/0BxZ0ZMeuhpwidlJWY3loQ1hhWUU/edit?usp=sharing
Extract packeted with ResearchDownload 2.9.7002
---
Im trying searching for ROM and specially howto create a second partition to use with /data, it's doesnt have /system/etc/init.d but /system/system/etc/init.goldfish.sh thread 2462984
I think this is a NOT CWM Clockwork set, maybe is another.
I Have almost connect with ResearchDownloa but fail to start flash because port com not working, but adb can shell it.
I Apreciate if somewhere have news for this mobile.
Reggards
do u have d backup of this original rom? we have desame phone but mine is dead when i flash wrong rom. please upload d original rom please!
Hi!
How to for C6806: post
ROOT
This is full image from PCC. It weight about 1 GB (1021MB)!!
This FTF will contain C6833 PL 1275-9426 SW update from sony (not branded) android 4.4.2.
FLASH ON YOUR OWN RISK!!!!
I AM NOT RESPONDING FOR ANY DEAD UNITS!!!!
cda: 1275-9426
cust_rev: R2B
custormerid: 463
LINK FOR DOWNLOAD:
https://drive.google.com/folderview?id=0BwarOhpT5ccwdW9WNjVUMUd2Y00&usp=sharing<-- reported downloaded to many times for google
Thanks to simunovic for mirror on another Gdrive
link:
https://docs.google.com/file/d/0B6E6Iz39OmIWdDRVZ1I2cnE5STQ/edit
Wow thats fast. Downloading..... Thanks reaper.....
Enviado do meu Xperia Z Ultra através de Tapatalk
What region is this from?
reaper61616 said:
Hi!
Uploading to gdrive:
https://drive.google.com/folderview?id=0BwarOhpT5ccwdW9WNjVUMUd2Y00&usp=sharing
Click to expand...
Click to collapse
Which region is this?
Sent from my C6833 using XDA Premium 4 mobile app
reaper61616 said:
Hi!
Uploading to gdrive:
https://drive.google.com/folderview?id=0BwarOhpT5ccwdW9WNjVUMUd2Y00&usp=sharing
Click to expand...
Click to collapse
will this work on c6802?
SpyderTracks said:
Which region is this?
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He's Polish, so i guess it's the European version? My next question is; should i update or not? I'm on the GPe ROM now and i've used KitKat for awhile, so should i do it? I love the GPe ROM, but i should probably try the new update - but i can't make a backup of the GPe ROM (well i can, but it's not that straight forward), so i'll end up in a pickle if i want to go back...
PL 1275-9426
8% of uploading.
mufaddal.gulshan said:
will this work on c6802?
Click to expand...
Click to collapse
Hard to say... If you test we will know...
Not ready yet
LordManhattan said:
He's Polish, so i guess it's the European version? My next question is; should i update or not? I'm on the GPe ROM now and i've used KitKat for awhile, so should i do it? I love the GPe ROM, but i should probably try the new update - but i can't make a backup of the GPe ROM (well i can, but it's not that straight forward), so i'll end up in a pickle if i want to go back...
Click to expand...
Click to collapse
Why is that? Can't you just make a nandroid backup and then go back if you don't like the update?
I mean, it's a matter of going back to stock, relock, and eventually unlock again, install recovery, recover the nandroid backup...
Or have I missed something?
BTW, Italy here, no OTA or PCC updates...
same here...no update yet....changed CDA to India/HK/GN still no
avetny said:
same here...no update yet....changed CDA to India/HK/GN still no
Click to expand...
Click to collapse
cda: 1275-9426
cust_rev: R2B
custormerid: 463
reaper61616 said:
cda: 1275-9426
cust_rev: R2B
custormerid: 463
Click to expand...
Click to collapse
ok my friend I'll try this now.
avetny said:
ok my friend I'll try this now.
Click to expand...
Click to collapse
I'm sure this will work
reaper61616 said:
I'm sure this will work
Click to expand...
Click to collapse
oh
C6802 with your CDA still no update
avetny said:
oh
C6802 with your CDA still no update
Click to expand...
Click to collapse
I suggest you to wait for ftf and then try to flash... Also prepare your stock rom ftf (not zip - new radio for 4.3.A so probably you will not be able to connect to network). Don't know about bootloader... And when you download ftf start from flashing kernel only and see if it will boot.
STILL I'M NOT SURE IF FLASHING FTF FROM C6833 IS GOOD IDEA - DON'T KNOW DIFERENTS BETWEEN C6802 AND C6833 IT MAY DEMAGE YOUR PHONE!!!
My build.prop from 4.3.A:
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Thu Feb 20 12:57:13 2014
ro.build.date.utc=1392897433
ro.build.user=BuildUser
ro.build.host=BuildHost
##### Final patch of properties #####
ro.build.product=C6833
ro.build.description=C6833-user 4.4.2 14.3.A.0.681 Vv1_jg release-keys
ro.product.brand=Sony
ro.product.name=C6833
ro.product.device=C6833
ro.build.version.incremental=Vv1_jg
ro.build.tags=release-keys
ro.build.fingerprint=Sony/C6833/C6833:4.4.2/14.3.A.0.681/Vv1_jg:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1275-9426
ro.semc.version.cust_revision=R3C
ro.somc.customerid=463
#############################################################################
############## Product Property Values ##############
ro.setupwizard.mode=DISABLED
#####################################################
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.semc.content.number=PA36
################# Updating of the SW Version #################
ro.semc.version.fs_revision=14.3.A.0.681
ro.build.id=14.3.A.0.681
ro.build.display.id=14.3.A.0.681
##### Values from product package metadata #####
ro.semc.product.model=C6833
ro.semc.ms_type_id=PM-0410-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia Z Ultra
ro.semc.product.device=C68
ro.product.model=C6833
# begin build properties
# autogenerated by buildinfo.sh
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8974
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/qcom/msm8974/system.prop
#
#
# system.prop for msm8974
#
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
debug.mdpcomp.4k2kSplit=true
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=1
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
#
# System props for bluetooth
# System prop to turn on hfp client
#bluetooth.hfp.client=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#Disable offload audio video playback by default
av.offload.enable=false
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#disable dsp gapless mode by default
audio.offload.gapless.enabled=false
#
# from device/somc/rhine/system.prop
#
#
# platform specific part of system.prop
#
#System prop for gralloc
persist.gralloc.cp.level3=1
#System props for audio
persist.audio.hp=true
#System props for the MM Audio
media.aac_51_output_enabled=true
# system property for somc thermal solution
ro.somc.thermal=system_monitor
# Enables two core touch boost
sys.somc.touch_perf_kick=1
#System props for the MM modules
encoder.video.profile=high
# aDSP sensors
ro.qualcomm.sensors.qmd=true
debug.qualcomm.sns.hal=w
ro.qc.sdk.sensors.gestures=false
ro.qc.sensors.max_accel_rate=false
ro.qc.sensors.max_gyro_rate=false
ro.qc.sensors.max_mag_rate=false
ro.qc.sensors.smgr_mag_cal_en=true
ro.qualcomm.sensors.pedometer=false
ro.qc.sensors.step_counter=true
ro.qc.sensors.step_detector=true
ro.qualcomm.sensors.pam=false
ro.qualcomm.sensors.scrn_ortn=false
ro.qualcomm.sensors.georv=true
ro.qualcomm.sensors.smd=sony
# Default values/Locales for the hiding languages feature
ro.product.locale.excluded=ar_EG ar_IL fa_IR iw_IL
# Do not use mdp composition for more than 3 pipes
debug.mdpcomp.maxpermixer=3
# Disable mixed mode
debug.mdpcomp.mixedmode.disable=1
# Modem power save enabled
persist.radio.add_power_save=1
#
# from device/somc/togari/system.prop
#
#
# product specific part of system.prop
#
ro.usb.pid_suffix=19C
ro.zygote.preload.configs=sw540dp
# NFC
ro.nfc.on.default=true
ro.nfc.se.sim.enable=true
ro.nfc.se.smx.enable=false
ro.nfc.icon.enable=false
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
ro.com.android.dataroaming=false
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
ro.com.google.gmsversion=4.4.2_r1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.sf.lcd_density=320
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.r_buffer_cache_size=4
ro.hwui.path_cache_size=24
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=5
ro.hwui.texture_cache_flushrate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
persist.sys.dalvik.vm.lib=libdvm.so
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.service.swiqi3.supported=true
persist.service.swiqi3.enable=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
fastest83 said:
Why is that? Can't you just make a nandroid backup and then go back if you don't like the update?
I mean, it's a matter of going back to stock, relock, and eventually unlock again, install recovery, recover the nandroid backup...
Or have I missed something?
BTW, Italy here, no OTA or PCC updates...
Click to expand...
Click to collapse
Nah, it's not that easy. I can't backup while i'm on this boot.img (can't mount system), so i'll have to find another one. When i've backed it up i'm left with a non-funtional NAND backup unless i use the same boot.img after i've restored it (if it restores it at all). I have no idea why this happens, so if i go back to stock and regret it, i'll have to start from scratch again when i flash the GPe ROM. It's super fun.
Dla jakiego regionu to soft? W temacie ze spisem CDA nie widzę takiego...
Heineken85 said:
Dla jakiego regionu to soft? W temacie ze spisem CDA nie widzę takiego...
Click to expand...
Click to collapse
Nie pisz po polsku tylko po angielsku! To jest forum globalne
This FW is from Poland not branded.
LordManhattan said:
Nah, it's not that easy. I can't backup while i'm on this boot.img (can't mount system), so i'll have to find another one. When i've backed it up i'm left with a non-funtional NAND backup unless i use the same boot.img after i've restored it (if it restores it at all). I have no idea why this happens, so if i go back to stock and regret it, i'll have to start from scratch again when i flash the GPe ROM. It's super fun.
Click to expand...
Click to collapse
Yeah that sounds real fun. Almost like smashing the screen with an hammer. XD
But hey, you DID start from scratch the first time you jumped on the GPe wagon, so that's like part of the deal...
Sent from my C6833 using Tapatalk
Hello,
I have buys a cheap phone (fake iPhone 5S), all good, but the ROM is very laggy, and i cant find a CWM. How to do for have CWM and dont have a laggy ROM ?
Here is information:
Hardware : MT6572 (mt6589 is Fake!)
Model : MF353ZP/A
Build number : ALPS.JB3.MP.V1
Build date UTC : 20140328-115413
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/06/21 10:16
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri Mar 28 17:22:48 CST 2014
And build.prop:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.display.id=ALPS.JB3.MP.V1
ro.build.version.incremental=eng.administrator.1396007526
ro.custom.build.version=1396007526
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=2014年 03月 28日 星期五 19:54:13 CST
ro.build.date.utc=1396007653
ro.build.type=user
ro.build.user=administrator
ro.build.host=pc
ro.build.tags=test-keys
ro.product.model=MF353ZP/A
ro.product.brand=iPhone
ro.product.name=iPhone
ro.product.device=ios72_wet_jb3
ro.product.board=iPhone
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=iPhone
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ios72_wet_jb3
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=ios72_wet_jb3-user 4.2.2 JDQ39 eng.administrator.1396007526 test-keys
ro.build.fingerprint=iPhone/ios72_wet_jb3/ios72_wet_jb3:4.2.2/JDQ39/1396007526:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.JB3.MP.V1
ro.mediatek.platform=MT6572
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.JB3.MP
ro.mediatek.version.sdk=1
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=128m
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
# USB BICR function
ro.sys.usb.bicr=yes
# USB Charge only function
ro.sys.usb.charging.only=yes
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
ro.zygote.preload.enable=0
ro.kernel.zio=38,108,105,16
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.gemini.sim_num=1
ro.gemini.smart_sim_switch=false
ro.gemini.smart_3g_switch=0
ril.specific.sm_cause=0
bgw.current3gband=0
ril.external.md=0
ro.sf.hwrotation=180
ril.current.share_modem=1
curlockscreen=1
ro.mediatek.gemini_support=false
persist.radio.fd.counter=15
persist.radio.fd.off.counter=5
persist.radio.fd.r8.counter=15
persist.radio.fd.off.r8.counter=5
persist.mtk.wcn.combo.chipid=-1
drm.service.enabled=true
fmradio.driver.enable=1
ril.first.md=1
ril.flightmode.poweroffMD=1
ril.telephony.mode=3
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
mediatek.wlan.chip=mediatek.wlan.module.postfix=_
ril.radiooff.poweroffMD=0
ro.config.notification_sound=Tri-tone.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Opening.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
cwm
take it)
boot_patched
recovery
laggy
it's just a cheap copy)) non-optimised rom and hardware. There is impossible to increase a pefromance...you had know what you buy...
help
neopunk88 said:
it's just a cheap copy)) non-optimised rom and hardware. There is impossible to increase a pefromance...you had know what you buy...
Click to expand...
Click to collapse
Do you have the phones rom??
Please give me
pcbyv said:
Do you have the phones rom??
Please give me
Click to expand...
Click to collapse
https://yadi.sk/d/_QdwWQZoXDmxb
firmware for flashtool!
but carefully, files may be potentially damaged, I have no md5 checksums for this files.
how to install thats recovery...please
sorry my english not good
khenzi said:
how to install thats recovery...please
sorry my english not good
Click to expand...
Click to collapse
with SP Flash Tool.
that install all file(bootpatced.recovery.scaterr)...or only i need....
khenzi said:
that install all file(bootpatced.recovery.scaterr)...or only i need....
Click to expand...
Click to collapse
You may flash what you need. Don't forget to make backup. Read manual for this program.
UOTE=neopunk88;54387436]You may flash what you need. Don't forget to make backup. Read manual for this program.[/QUOTE]
Do you have sdcard flash rom??
hi icome from vietnam
my phone is iphone 5s mf353zp/a A131MW
today i flash rom's A135 have my phone is brick so not getting charged and not on the screen
who can help me ?????
very very thank !!!!
sory my enghish not good
: Nhầm lẫn:: O
---------- Post added at 10:24 AM ---------- Previous post was at 10:19 AM ----------
who can give me rom's iphone 5s mf353zp/a A131 MW
my iphone is a131 to...what you iphone mr neoupunk
khenzi said:
my iphone is a131 to...what you iphone mr neoupunk
Click to expand...
Click to collapse
Can you give me one rom of A131 ???
Very very very very thank you !!!!!:silly:
dat.97.Vietnam said:
Can you give me one rom of A131 ???
Very very very very thank you !!!!!:silly:[/QUOTE
srry i can't....i dont have any rom....and i no have backup original rom....bcause the recovery not support.....
do u have recovery.img?please give me
Click to expand...
Click to collapse
khenzi said:
dat.97.Vietnam said:
Can you give me one rom of A131 ???
Very very very very thank you !!!!!:silly:[/QUOTE
srry i can't....i dont have any rom....and i no have backup original rom....bcause the recovery not support.....
do u have recovery.img?please give me[/QUOTE
search rom on this site http://m.kaskus.co.id/thread/52e7a5...-goophone-i5s---android-422---mt6572-12-ghz/3
Click to expand...
Click to collapse
Click to expand...
Click to collapse
neopunk88 said:
take it)
boot_patched
recovery
Click to expand...
Click to collapse
hi ..will it be ok to use this rom with a device htc m8 clone?
device specs:
mt6572
model: m8
manufacturer: xiaoxing
android ver: 4.2.2
sw version: alps.jb3.mp.v1
modem version: moly.wr8.w1315.md.wg.mp.v1.p3
i cant find the official firmware on internet..
Need HTC Rom Kitkat Version for MTK6572
marchjunah07 said:
hi ..will it be ok to use this rom with a device htc m8 clone?
device specs:
mt6572
model: m8
manufacturer: xiaoxing
android ver: 4.2.2
sw version: alps.jb3.mp.v1
modem version: moly.wr8.w1315.md.wg.mp.v1.p3
i cant find the official firmware on internet..
Click to expand...
Click to collapse
Yeah..
I have HTC one m8 too..
I can't find any HTC One M8 Rom...
I really really want to change the appearance of status bar like the original HTC one M8..
I hope someone gonna read this and give a HTC One M8 Rom for MTK6572 Device.
I need it so badly! Thanks in Advance
Model: HTC One_M8
Manufacturer: HTC One_M8
Chipset: MT6572
Baseband: MOLY.WR8.W1315.MD.WG.MP.V1.P2,2014/06/11 17:40
RIL Version: mtk gemini ril 1.0
Build Number: ALPS.JB3.MP.V1
OS Version: Jelly Bean MR1 (4.2.2)
SDK: 17
Information above produce by Droid Info.
kikztar said:
Yeah..
I have HTC one m8 too..
I can't find any HTC One M8 Rom...
I really really want to change the appearance of status bar like the original HTC one M8..
I hope someone gonna read this and give a HTC One M8 Rom for MTK6572 Device.
I need it so badly! Thanks in Advance
Model: HTC One_M8
Manufacturer: HTC One_M8
Chipset: MT6572
Baseband: MOLY.WR8.W1315.MD.WG.MP.V1.P2,2014/06/11 17:40
RIL Version: mtk gemini ril 1.0
Build Number: ALPS.JB3.MP.V1
OS Version: Jelly Bean MR1 (4.2.2)
SDK: 17
Information above produce by Droid Info.
Click to expand...
Click to collapse
hi sir try this rom
Code:
Hardware: MT6572
Model: mbk72_wet_lca
Build number: ALPS.JB3.MP.V1
Build date UTC: 20140616-015352
Android v: 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P3, 2013/11/15 14:46
Kernel v: 3.4.5 (xiaoxianbang @ mht-09) (gcc version 4.6.x-google 20120106 (prerelease) (GCC)) # 1 SMP Mon Jun 16 09:51:22 CST 2014
Uboot build v: ----- needs root shell
LCD Driver IC: 1-hx8369b_dsi_vdo
Where is the Download link?
2net2 said:
hi sir try this rom
Code:
Hardware: MT6572
Model: mbk72_wet_lca
Build number: ALPS.JB3.MP.V1
Build date UTC: 20140616-015352
Android v: 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P3, 2013/11/15 14:46
Kernel v: 3.4.5 (xiaoxianbang @ mht-09) (gcc version 4.6.x-google 20120106 (prerelease) (GCC)) # 1 SMP Mon Jun 16 09:51:22 CST 2014
Uboot build v: ----- needs root shell
LCD Driver IC: 1-hx8369b_dsi_vdo
Click to expand...
Click to collapse
Hi sir where is the download link and how do i know if that rom is compatible on my device? because i dont have buttons its a software button screen. please reply
Anyone have this ROM?
A135-MB4-v1.1
I've searching without success for this ROM for days.
Thanks in advance.
Hi guys,
i need Flashfile for a China Clone of a Samsung S7. Unfortunately i dont know the brand/Cloner.
A Guy with a Blog uploaded a flashfile for this Samsung. It seems to be the same ClonePhone.
This dude has a passwort on this flashfile so i cant install this.
Does anybody have this flashfile called Samsung S7 Sm-G930FD Clone Copy Mt6580 V5.1 Flash File
Maybe this could be important:
Brand : alps
ProdName : full_gxq6580_weg_l
ProdModel : gxq6580_weg_l
Device : gxq6580_weg_l
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_GXQ6580.WEG.L_P62
I hope somebody can help me and sorry for my cruel english.
same problem... lahat ng mga na download kong firmware puro may password.. sana may magbigay ng firmware or aplication na pedeng makapag unlock ng .zip na password...
Mine is an Orro S7, clone for Galaxy S7. I got a ROM in NeedROM.
romulocarlos said:
Mine is an Orro S7, clone for Galaxy S7. I got a ROM in NeedROM.
Click to expand...
Click to collapse
Hi
I need the firmware or custom rom for this model and scatter file
1- samsung galaxy s7+ clone mode(with ztc technology label)
2- MTK mt6580
3-pictures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4-ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
espiran said:
Hi
I need the firmware or custom rom for this model and scatter file
1- samsung galaxy s7+ clone mode(with ztc technology label)
2- MTK mt6580
3-pictures
4-ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
Click to expand...
Click to collapse
I don't have this phone or the files anymore. Try find in NeedROM.
romulocarlos said:
I don't have this phone or the files anymore. Try find in NeedROM.
Click to expand...
Click to collapse
Anyway thank you bro!
jm4321 said:
Hi guys,
i need Flashfile for a China Clone of a Samsung S7. Unfortunately i dont know the brand/Cloner.
A Guy with a Blog uploaded a flashfile for this Samsung. It seems to be the same ClonePhone.
This dude has a passwort on this flashfile so i cant install this.
Does anybody have this flashfile called Samsung S7 Sm-G930FD Clone Copy Mt6580 V5.1 Flash File
Maybe this could be important:
Brand : alps
ProdName : full_gxq6580_weg_l
ProdModel : gxq6580_weg_l
Device : gxq6580_weg_l
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_GXQ6580.WEG.L_P62
I hope somebody can me and sorry for my cruel english.
Click to expand...
Click to collapse
hi
please download the file without password:
MT6580__alps__gxq6580_weg_l__gxq6580_weg_l__5.1__ALPS.L1.MP6.V2_GXQ6580.WEG.L_P62.rar
size: 470mb
http://espiran.ir/files/android/mob..._l__5.1__ALPS.L1.MP6.V2_GXQ6580.WEG.L_P62.rar
please be patient. contact me by email: [email protected] for any problem
Not that I want to jack the topic and all, but does anyone have a firmware file for my S7 clone? Some dude from the UAE uploaded what appears to be the same firmware as mine, with the ro.build.display.id "Z6U030HA_V101En", but the problem is the MEGA link for it has since been taken down for some reason. Here's the build.prop if anyone needs to take a look: http://pastebin.com/Un4HpPEj
blakegriplingph said:
Not that I want to jack the topic and all, but does anyone have a firmware file for my S7 clone? Some dude from the UAE uploaded what appears to be the same firmware as mine, with the ro.build.display.id "Z6U030HA_V101En", but the problem is the MEGA link for it has since been taken down for some reason. Here's the build.prop if anyone needs to take a look: http://pastebin.com/Un4HpPEj
Click to expand...
Click to collapse
Please give me some information about your phone:
1. exact model name?
2- biuld.prop information? and firmware version. and which type of cpu ?for example (mt65xx....)
3. some pictures of the box of your mobile or the back of your phone ?
So I help you better.
thanx
espiran said:
Please give me some information about your phone:
1. exact model name?
2- biuld.prop information? and firmware version. and which type of cpu ?for example (mt65xx....)
3. some pictures of the box of your mobile or the back of your phone ?
So I help you better.
thanx
Click to expand...
Click to collapse
Hope I described this eloquently, as it doesn't appear to be an HDC-brand clone of some sort. I could try the one off NeedROM but I'd be SOL as it might have a different preloader. It's an MT6580-based G930F clone, with 512MB of RAM and 8GB ROM. The shell's made out of plastic instead of aluminum, has the main microphone pin near the headphone jack instead of being near the speaker, and a thicker camera bump compared to the real thing. Fortunately I managed to take a few screenshots and dump the build.prop off this thing prior to the accident:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LMY47I
ro.build.display.id=Z6U030HA_V101En
ro.build.version.incremental=1460375081
ro.custom.build.version=Z6U030HA_V101En20160411
ro.build.version.sdk=22
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.1
ro.build.version.security_patch=2016-01-01
ro.build.version.base_os=
ro.build.date=Mon Apr 11 19:46:53 CST 2016
ro.build.date.utc=1460375213
ro.build.type=user
ro.build.user=sw02
ro.build.host=sw02-PowerEdge-T620
ro.build.tags=release-keys
ro.build.flavor=full_gxq6580_weg_l-user
ro.product.model=gxq6580_weg_l
ro.product.brand=alps
ro.product.name=full_gxq6580_weg_l
ro.product.device=gxq6580_weg_l
ro.product.board=
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=mt6580
# ro.build.product is obsolete; use ro.product.device
ro.build.product=gxq6580_weg_l
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=full_gxq6580_weg_l-user 5.1 LMY47I 1460375081 test-keys
ro.build.fingerprint=alps/full_gxq6580_weg_l/gxq6580_weg_l:5.1/LMY47I/1460375081:user/test-keys
ro.build.characteristics=default
ro.fota.product.model=Z6U020_A_2016
ro.fota.product.version=4.3
# end build properties
#
# from device/gxq/gxq6580_weg_l/system.prop
#
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
wifi.tethering.interface=ap0
#
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=256m
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
persist.sys.usb.config=mtp
# USB BICR function
ro.sys.usb.bicr=yes
# USB Charge only function
ro.sys.usb.charging.only=yes
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
ro.zygote.preload.enable=0
# temporary enables NAV bar (soft keys)
qemu.hw.mainkeys=0
ro.kernel.zio=38,108,105,16
#ro.kernel.qemu=0
#ro.kernel.qemu.gles=0
ro.opengles.version=131072
#ro.boot.selinux=disable
# Disable dirty region for Mali
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.notification_sound=Skyline.ogg
ro.config.alarm_alert=Morning_flower.ogg
ro.carrier=unknown
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=256m
ro.mediatek.chip_ver=S01
ro.mediatek.version.release=ALPS.L1.MP6.V2_GXQ6580.WEG.L_P62
ro.mediatek.platform=MT6580
ro.telephony.sim.count=2
persist.radio.default.sim=0
persist.radio.multisim.config=dsds
persist.md.perm.checked=to_upgrade
persist.gemini.sim_num=2
ro.gemini.smart_sim_switch=false
ril.specific.sm_cause=0
bgw.current3gband=0
ril.external.md=0
ro.btstack=blueangel
ro.sf.hwrotation=180
ril.current.share_modem=2
curlockscreen=1
ro.mediatek.gemini_support=true
persist.radio.fd.counter=15
persist.radio.fd.off.counter=5
persist.radio.fd.r8.counter=15
persist.radio.fd.off.r8.counter=5
drm.service.enabled=true
fmradio.driver.enable=1
ril.first.md=1
ril.flightmode.poweroffMD=1
ril.telephony.mode=0
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
mediatek.wlan.chip=CONSYS_MT6735
mediatek.wlan.module.postfix=_consys_mt6735
ril.radiooff.poweroffMD=0
ro.frp.pst=/dev/block/platform/mtk-msdc.0/by-name/frp
ro.mediatek.version.branch=L1.MP6
ro.mediatek.version.sdk=4
ro.mtk_gemini_support=1
ro.mtk_audio_profiles=1
ro.mtk_audenh_support=1
ro.mtk_lossless_bt_audio=1
ro.mtk_besloudness_support=1
ro.mtk_bessurround_support=1
ro.mtk_gemini_enhancement=1
ro.mtk_wapi_support=1
ro.mtk_bt_support=1
ro.mtk_wappush_support=1
ro.mtk_agps_app=1
ro.mtk_wlan_support=1
ro.mtk_ipo_support=1
ro.mtk_gps_support=1
ro.mtk_omacp_support=1
ro.mtk_search_db_support=1
ro.mtk_dialer_search_support=1
ro.mtk_dhcpv6c_wifi=1
ro.have_aacencode_feature=1
ro.mtk_fd_support=1
ro.mtk_oma_drm_support=1
ro.mtk_cta_drm_support=1
ro.mtk_widevine_drm_l3_support=1
ro.mtk_eap_sim_aka=1
ro.mtk_fm_recording_support=1
ro.mtk_audio_ape_support=1
ro.mtk_flv_playback_support=1
ro.mtk_wmv_playback_support=1
ro.mtk_send_rr_support=1
ro.mtk_rat_wcdma_preferred=1
ro.mtk_emmc_support=1
ro.mtk_tetheringipv6_support=1
ro.mtk_phone_number_geo=1
ro.mtk_shared_sdcard=1
ro.mtk_enable_md1=1
ro.mtk_flight_mode_power_off_md=1
ro.mtk_pq_support=2
ro.mtk_miravision_support=1
ro.mtk_miravision_image_dc=1
ro.mtk_wifi_mcc_support=1
ro.mtk_system_update_support=1
ro.mtk_sim_hot_swap=1
ro.mtk_thumbnail_play_support=1
ro.mtk_bip_scws=1
ro.mtk_gmo_ram_optimize=1
ro.mtk_gmo_rom_optimize=1
ro.mtk_world_phone_policy=0
ro.mtk_perfservice_support=1
ro.mtk_sim_hot_swap_common_slot=1
ro.mtk_cta_set=1
ro.mtk_mobile_management=1
ro.mtk_antibricking_level=2
ro.mtk_cam_mfb_support=0
ro.mtk_cam_mav_support=1
ro.sim_refresh_reset_by_modem=1
ro.mtk_live_photo_support=1
ro.mtk_motion_track_support=1
ro.mtk_privacy_protection_lock=1
ro.mtk_bg_power_saving_support=1
ro.mtk_bg_power_saving_ui=1
ro.have_aee_feature=1
ro.sim_me_lock_mode=0
ro.mtk_dual_mic_support=0
ro.mtk_is_tablet=0
wfd.dummy.enable=1
ro.mediatek.project.path=device/gxq/gxq6580_weg_l
persist.mtk.wcn.combo.chipid=-1
service.wcn.driver.ready=no
ro.com.android.mobiledata=false
persist.radio.mobile.data=0,0
persist.meta.dumpdata=0
ro.custom_project_name=1
ro.auto_add_imei_support=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.features=div
ro.gpad_support=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Here's an imgur gallery of the phone in question:
http://imgur.com/gallery/5227n
...as well as screenshots I took some time ago:
http://imgur.com/a/0I8jo
Oh and here's a partition dump I made when I ran it through NCK box:
Code:
Partitions count: 21
Partition: proinfo Start = 0x80000 Len = 0x300000
Partition: nvram Start = 0x380000 Len = 0x500000
Partition: protect1 Start = 0x880000 Len = 0xa00000
Partition: protect2 Start = 0x1280000 Len = 0xa00000
Partition: seccfg Start = 0x1c80000 Len = 0x40000
Partition: lk Start = 0x1cc0000 Len = 0x60000
Partition: boot Start = 0x1d20000 Len = 0x1000000
Partition: recovery Start = 0x2d20000 Len = 0x1000000
Partition: para Start = 0x3d20000 Len = 0x80000
Partition: logo Start = 0x3da0000 Len = 0x800000
Partition: expdb Start = 0x45a0000 Len = 0xa00000
Partition: frp Start = 0x4fa0000 Len = 0x100000
Partition: nvdata Start = 0x50a0000 Len = 0x2000000
Partition: metadata Start = 0x70a0000 Len = 0x2760000
Partition: oemkeystore Start = 0x9800000 Len = 0x200000
Partition: secro Start = 0x9a00000 Len = 0x600000
Partition: keystore Start = 0xa000000 Len = 0x800000
Partition: system Start = 0xa800000 Len = 0x51800000
Partition: cache Start = 0x5c000000 Len = 0x10000000
Partition: userdata Start = 0x6c000000 Len = 0x155f80000
Partition: flashinfo Start = 0x1c1f80000 Len = 0x1000000
Anyone? Please!
Bump
Please be advised that all of china mobile phone has malware and viruses. and there is no source for android v5.1 or 6.0 to compile.
see:
https://www.cnet.com/news/malware-from-china-infects-over-10-million-android-users-report-says/
https://www.theguardian.com/technology/blog/2010/nov/12/china-mobile-virus-report-one-million
espiran said:
Please be advised that all of china mobile phone has malware and viruses. and there is no source for android v5.1 or 6.0 to compile.
see:
https://www.cnet.com/news/malware-from-china-infects-over-10-million-android-users-report-says/
https://www.theguardian.com/technology/blog/2010/nov/12/china-mobile-virus-report-one-million
Click to expand...
Click to collapse
Figures, though you could get away with editing the firmware to at least mitigate the malware or something.
And yes I am still looking for that damn ROM.
It is possible . if you want I'll give you the address of infected folders and you can delete those . but be careful, some application stop working and not responding and you can free up 50% memory usage and your phone get faster.
install Malwarebytes from play store . it will be find these folders
ZF_CP_C012109
zf_CallerIdSearch (/system/priv-app)
zf_shulian_fota(system/app or data/app)
skymobLock
and some more folders in your sd card beginning with UI or PUSH name.(delete them from sd card)
espiran said:
It is possible . if you want I'll give you the address of infected folders and you can delete those . but be careful, some application stop working and not responding and you can free up 50% memory usage and your phone get faster.
install Malwarebytes from play store . it will be find these folders
ZF_CP_C012109
zf_CallerIdSearch (/system/priv-app)
zf_shulian_fota(system/app or data/app)
skymobLock
and some more folders in your sd card beginning with UI or PUSH name.(delete them from sd card)
Click to expand...
Click to collapse
Yeah I froze SystemLocker and GoogleVending on my phone, and from what I can attest I no longer get popups and other such nasties after I did it.
And as for the OP, will either of these two firmware images work?
http://www.4shared.com/rar/TU4wkcR-ba/s7_clone_mt6580_clean_by_clami.htm
http://www.4shared.com/rar/SVk4eW5tce/Galaxy_S7_MT6580_by_Neifra_Gsm.htm
Good Job! I hope that could be useful for you. please tell me about functionality of your phone after that!!
Does it work correctly !!?
---------- Post added at 12:17 PM ---------- Previous post was at 12:13 PM ----------
But there is some things to check:
1- check your storage capacity. to see if it is 4gb or 16 gb or ....?
2-check your front and back camera to see if it can capture 12 mp or 5 pixel.?
please tell me to know about these issues.
One of the ROMs I linked to appear to be a close match to the stock ROM that came with my device, but would anyone be kind enough to upload a ROM with the ID "Z6U030HA_V101En"? It's been several weeks since I bricked my phone, yet I haven't spotted the exact same ROM yet. :/
blakegriplingph said:
One of the ROMs I linked to appear to be a close match to the stock ROM that came with my device, but would anyone be kind enough to upload a ROM with the ID "Z6U030HA_V101En"? It's been several weeks since I bricked my phone, yet I haven't spotted the exact same ROM yet. :/
Click to expand...
Click to collapse
both of linkes works fine.
I told you if you have problem please contact my email to help you.
Hi guys head to the new thread
and join our telegram https://t.me/doogee_mixv2
the new thread is lineageos
All works fine? Can post some screen capture?
proof of it working
Big_beef_baby said:
Doogee mix flyme os 7 I am not responsible for any harm done to you device I have tested on mine and it is working
(USE SP FLASH TOOL)
FIRST FLASH TWRP MORE INFO HERE:https://forum.xda-developers.com/doogee-mix/development/test-unofficial-doogee-mix-twrp-t3648831
ROM LINK:
https://mega.nz/#!U74hiIRC!74MTmf9dSlEqmJ9htXSHWbJ8cBqAxARppGBZD469icg
Click to expand...
Click to collapse
Can you post more pictures? I want to see what is the difference.
It runs android 8.0 here is a video:
https://mega.nz/#!825HHCwb!TPuN3R9pcXyKYRva_Q93tzqzFQvqM_h-pIeqZ1h63cs
Can you do a stable custom rom for Doogee Mix based on Pie (Android 9) ?
Dr23890 said:
Can you do a stable custom rom for Doogee Mix based on Pie (Android 9) ?
Click to expand...
Click to collapse
Probably but let's see if this works with all devices and android pie to be fully released
Has anyone else installed the rom yet, if you have is it working
Nice development. It's a good beginning.
We'll all take it from there.
Downloading to try out.
Seems the ROM is still Android 7.0. Although downloaded, it is important to but yet Flash.
Extracted from manifest/build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.cta=noncta
ro.meizu.build.spt=0
ro.build.id=NRD90M
ro.build.mask.id=7.0-1528948024_intlstable
ro.build.inside.id=7.0-20180614114704
ro.build.version.incremental=1527197630
ro.build.version.sdk=24
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=7.0
ro.build.version.security_patch=2018-05-05
ro.build.version.base_os=
ro.build.date=Thu Jun 14 11:49:33 CST 2018
ro.build.date.utc=1528948173
ro.build.type=user
ro.build.user=flyme
ro.build.host=mz-builder-9
ro.build.tags=release-keys
ro.build.flavor=full_mz6757_66_92l_n-user
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.locale=en-US
ro.wifi.channels=
ro.board.platform=mt6757
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse description, fingerprint, or thumbprint
ro.build.characteristics=default
ro.product.brand=Meizu
ro.product.manufacturer=Meizu
ro.product.model=PRO 7
ro.meizu.product.model=PRO7S
ro.build.display.id=Flyme 7.0.0.0G
ro.product.name=meizu_PRO7S
ro.product.device=PRO7S
ro.product.board=PRO7S
# ro.build.product is obsolete; use ro.product.device
ro.build.product=PRO7S
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=meizu_PRO7S-user 7.0 NRD90M 1527197630 release-keys
ro.build.fingerprint=Meizu/meizu_PRO7S/PRO7S:7.0/NRD90M/1527197630:user/release-keys
ro.meizu.project.id=M1792L-6
ro.product.flyme.model=M1792L
ro.build.flyme.version=7
ro.flyme.published = true
# end build properties
ro.meizu.build.number=201806141200
#
# from device/meizu/mz6757_66_92l_n/system.prop
#
#
# system.prop for generic sdk
#
rild.libpath=mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
wifi.tethering.interface=ap0
#
ro.opengles.version=196610
# ro.kernel.qemu=1
# ro.kernel.qemu.gles=0
wifi.direct.interface=p2p0
#dalvik.vm.heapgrowthlimit=256m
#dalvik.vm.heapsize=512m
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp
# USB BICR function
ro.sys.usb.bicr=yes
# USB Charge only function
ro.sys.usb.charging.only=yes
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
ro.zygote.preload.enable=0
# temporary enables NAV bar (soft keys)
qemu.hw.mainkeys=0
ro.kernel.zio=38,108,105,16
#ro.kernel.qemu=1
#ro.kernel.qemu.gles=0
#ro.boot.selinux=disable
# Disable dirty region for Mali
#debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=480
# performance
ro.mtk_perf_simple_start_win=1
ro.mtk_perf_fast_start_win=1
ro.mtk_perf_response_time=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.hardware.hifi.support=true
ro.setupwizard.require_network=any
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=7.0_201803
ro.com.google.clientidbase=android-meizu
ro.product.first_api_level=24
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=03_Flyme.ogg
ro.config.notification_sound=02_Reminder.ogg
ro.config.mms_sound=01_Triumph.ogg
ro.config.email_sound=02_Reminder.ogg
ro.config.calendar_sound=03_Doorbell.ogg
ro.config.alarm_alert=19_Waltz.ogg
log.tag.VibeTonz=ERROR
ro.carrier=unknown
persist.mtk_ct_volte_support=1
ro.mediatek.chip_ver=S01
ro.mediatek.platform=MT6757
ro.telephony.sim.count=2
persist.radio.default.sim=0
ril.specific.sm_cause=0
bgw.current3gband=0
ril.external.md=0
ro.mtk_cam_lomo_support=1
ro.sf.hwrotation=0
persist.radio.fd.counter=15
persist.radio.fd.off.counter=5
persist.radio.fd.r8.counter=15
persist.radio.fd.off.r8.counter=5
drm.service.enabled=true
fmradio.driver.enable=0
mtk.eccci.c2k=enabled
ril.first.md=1
ril.flightmode.poweroffMD=0
ril.telephony.mode=0
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
mediatek.wlan.chip=CONSYS_MT6757
mediatek.wlan.module.postfix=_consys_mt6757
ril.read.imsi=1
ril.radiooff.poweroffMD=0
ro.frp.pst=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
ro.mtk_protocol1_rat_config=C/Lf/Lt/W/T/G
ro.mediatek.version.branch=alps-mp-n0.mp5
ro.mediatek.version.release=alps-mp-n0.mp5-V1.36_mz6757.66.92l.n_P1
ro.mediatek.version.sdk=4
ro.num_md_protocol=2
persist.radio.multisim.config=dsds
ro.mtk_wapi_support=1
ro.mtk_bt_support=1
ro.mtk_wappush_support=1
ro.mtk_agps_app=1
ro.mtk_audio_tuning_tool_ver=V2.2
ro.mtk_wlan_support=1
ro.mtk_gps_support=1
ro.mtk_omacp_support=1
ro.mtk_search_db_support=1
ro.mtk_dialer_search_support=1
ro.mtk_dhcpv6c_wifi=1
ro.have_aacencode_feature=1
ro.mtk_fd_support=1
ro.mtk_oma_drm_support=1
ro.mtk_cta_drm_support=1
ro.mtk_widevine_drm_l3_support=1
ro.mtk_eap_sim_aka=1
ro.mtk_send_rr_support=1
ro.mtk_emmc_support=1
ro.mtk_tetheringipv6_support=1
ro.mtk_c2k_support=1
persist.radio.flashless.fsm=0
persist.radio.flashless.fsm_cst=0
persist.radio.flashless.fsm_rw=0
ro.cdma.cfu.enable=*72
ro.cdma.cfu.disable=*720
ro.cdma.cfb.enable=*90
ro.cdma.cfb.disable=*900
ro.cdma.cfnr.enable=*92
ro.cdma.cfnr.disable=*920
ro.cdma.cfdf.enable=*68
ro.cdma.cfdf.disable=*680
ro.cdma.cfall.disable=*730
ro.cdma.cw.enable=*74
ro.cdma.cw.disable=*740
telephony.lteOnCdmaDevice=1
ro.telephony.default_network=10,10
ro.mtk_shared_sdcard=1
ro.mtk_enable_md1=1
ro.mtk_enable_md3=1
ro.mtk_afw_support=1
ro.mtk_soter_support=1
ro.meizu_soter_support=1
ro.mtk_aal_support=1
ro.mtk_pq_support=2
ro.mtk_pq_color_mode=1
ro.mtk_blulight_def_support=1
ro.mtk_wfd_support=1
ro.mtk_wifi_mcc_support=1
ro.mtk_sim_hot_swap=1
ro.mtk_bip_scws=1
ro.mtk_world_phone_policy=0
ro.mtk_md_world_mode_support=1
ro.mtk_perfservice_support=1
ro.mtk_sim_hot_swap_common_slot=1
ro.mtk_cta_set=1
ro.mtk_zsdhdr_support=1
ro.mtk_cam_mfb_support=3
ro.mtk_cam_dualdenoise_support=1
ro.mtk_slow_motion_support=1
ro.mtk_cam_img_refocus_support=1
ro.mtk_lte_support=1
ro.mtk_rild_read_imsi=1
ro.sim_refresh_reset_by_modem=1
ro.mtk_external_sim_support=1
ro.mtk_external_sim_only_slots=0
ro.mtk_bg_power_saving_ui=1
ro.sim_me_lock_mode=0
ro.mtk_dual_mic_support=1
ro.mtk_is_tablet=0
ro.mtk_pow_perf_support=1
persist.mtk_nlp_switch_support=1
persist.mtk_ims_support=1
ro.mtk_multiple_ims_support=1
persist.mtk_volte_support=1
persist.mtk.volte.enable=1
persist.mtk_vilte_support=0
ro.mtk_vilte_ut_support=0
wfd.dummy.enable=1
wfd.iframesize.level=0
ro.mediatek.project.path=device/meizu/mz6757_66_92l_n
ro.mtk_microtrust_tee_support=1
ro.flyme_softsim_mtee_enable=1
persist.mtk.wcn.combo.chipid=-1
persist.mtk.wcn.patch.version=-1
persist.mtk.wcn.dynamic.dump=0
service.wcn.driver.ready=no
service.wcn.coredump.mode=0
persist.mtk.connsys.poweron.ctl=0
persist.mtk_epdg_support=1
ro.com.android.mobiledata=true
persist.radio.mobile.data=0,0
persist.radio.fourgOff=1
persist.meta.dumpdata=0
ro.mtk_deinterlace_support=1
ro.mtk_md_sbp_custom_value=0
persist.radio.mtk_dsbp_support=1
persist.mtk_dynamic_ims_switch=1
persist.radio.mtk_ps2_rat=W/G
persist.radio.mtk_ps3_rat=G
ro.boot.opt_c2k_lte_mode=2
ro.boot.opt_md1_support=12
ro.boot.opt_md3_support=2
ro.boot.opt_lte_support=1
ro.boot.opt_irat_support=1
persist.log.tag.DCT=D
ro.boot.opt_eccci_c2k=1
ro.boot.opt_using_default=1
ro.boot.opt_c2k_support=1
persist.log.tag.C2K_AT=I
persist.log.tag.C2K_RILC=I
persist.log.tag.C2K_ATConfig=I
mtk.vdec.waitkeyframeforplay=1
ro.sys.sdcardfs=1
ro.media.maxmem=500000000
persist.log.tag.CdmaMoSms=I
persist.log.tag.CdmaMtSms=I
ro.mtk_log_hide_gps=0
ro.mtk_modem_monitor_support=1
ro.have_aee_feature=1
ro.meizu.ess.support=1
persist.power.usetwilightadj=true
ro.meizu.enable.stepcounter=true
ro.meizu.carrier.model=M792H
persist.sys.timezone=Asia/Shanghai
persist.sys.meizu.region=cn
persist.sys.meizu.codepage=gbk
ro.meizu.setupwizard.flyme=true
ro.meizu.setupwizard.setlang=true
ro.meizu.region.enable=true
ro.meizu.contactmsg.auth=false
ro.meizu.customize.pccw=false
ro.meizu.autorecorder=true
ro.meizu.visualvoicemail=true
ro.meizu.security=false
ro.meizu.permanentkey=false
ro.meizu.sip.support=true
ro.meizu.voip.support=false
sys.meizu.m35x.white.config=false
sys.meizu.white.config=false
persist.sys.log-main.enable=0
persist.sys.log-system.enable=0
persist.sys.log-events.enable=0
persist.sys.log-radio.enable=0
persist.sys.at.open=0
persist.sys.use.flyme.icon=true
ro.adb.secure=1
keyguard.no_require_sim=true
persist.sys.keyguard_intercept=true
persist.sys.cts_state=false
persist.sys.cts_Myanmar_state=false
persist.sys.disable_blur_view=true
persist.sys.static_blur_mode=false
ro.meizu.published.type=prd
ro.meizu.upgrade.config=true
ro.meizu.build.branch=M1792L_MNF7_mp1
ro.meizu.build.devowner=meizu
qemu.hw.mainkeys=1
persist.sf.dualdisplay=1
persist.perf.url.wxhb=https://wx.gtimg.com/hongbao/1800/hb.png
debug.hwui.render_dirty_regions=true
ro.hwui.disable_asset_atlas=true
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
ro.mtk_benchmark_boost_tp=1
debug.choreographer.skipwarning=3
persist.perf.wm_static_blur=true
ro.sys.fw.bservice_enable=true
ro.sys.fw.bservice_limit=5
ro.sys.fw.bservice_age=5000
debug.remote.config.disable=true
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.fbo_cache_size=48
ro.hwui.path_cache_size=32
ro.hwui.r_buffer_cache_size=9
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.gradient_cache_size=4
ro.hwui.drop_shadow_cache_size=8
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.product.perf.config=M1792L_base
persist.sf.startingwindow.gles=0
persist.sys.app.thread=4
persist.sys.plugin.thread=4
persist.sys.plugin.compiler=interpret-only
persist.sys.plugin.path=/data/data/|/data/user/
persist.sys.mstore.dl.num=1
persist.sf.ssr.controlbar=0
persist.sys.sf.camera=1
persist.thermalmanager.enable=true
persist.thermalmanager.path=/vendor/bin/thermal_manager
persist.thermalconfig.off=/vendor/etc/.tp/thermal.off.conf
persist.thermalconfig.powersave=/vendor/etc/.tp/thermal.low.conf
persist.thermalconfig.mid=/vendor/etc/.tp/thermal.mid.conf
persist.thermalconfig.high=/vendor/etc/.tp/thermal.high.conf
persist.mtkperfservice.enable=false
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=cortex-a53
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.recovery.matrix.ver=VER_20180226_00
ro.meizu.recovery.forceencrypt=true
ro.expect.recovery_id=0x82bbeb6a41e61acfcbe408b222a43ff75d63b36e000000000000000000000000
Click to expand...
Click to collapse
The build.prop hasn't been edited I have been told that it is 7.0 so I will update it soon ALSO THERE ARE UPDATED INSTRUTIONS WHERE YOU CAN DOWNLOAD THE ROM
Big_beef_baby said:
Doogee mix flyme os 7 I am not responsible for any harm done to you device I have tested on mine and it is working
(USE SP FLASH TOOL)
FIRST FLASH TWRP MORE INFO HERE:https://forum.xda-developers.com/doogee-mix/development/test-unofficial-doogee-mix-twrp-t3648831
ROM LINK:
https://mega.nz/#!U74hiIRC!74MTmf9dSlEqmJ9htXSHWbJ8cBqAxARppGBZD469icg
BEFORE UPDATING TO 7.1 FLASH THE ABOVE ROM THEN FLASH UPDATE.ZIP VIA THE SETTINGS OR SP FLASH TOOLS (OREO COMING SOON)
UPADTE.ZIP: https://mega.nz/#!Ru5gTYCC!Yhd9v09yBDa_ooNFvMW5-KSiHLupV_zCL8S4W90zPCc
ALSO I AM WORKING ON PORTING LINEAGEOS SO SUBSCRIBE FOR THAT
Click to expand...
Click to collapse
Can you please clarify the instructions on how to use the sp flashtool with your custom rom?
Also,the attempt to flash the android oreo flyme os zip file fails with twrp 3.1.1 .
Dr23890 said:
Can you please clarify the instructions on how to use the sp flashtool with your custom rom?
Also,the attempt to flash the android oreo flyme os zip file fails with twrp 3.1.1 .
Click to expand...
Click to collapse
also here is some info https://androidforums.com/threads/twrp-wont-flash-any-roms.914938/
SP FLASH TOOL HERE IS A VIDEO: https://www.youtube.com/watch?v=hpunZq0X2KM
Big_beef_baby said:
also here is some info https://androidforums.com/threads/twrp-wont-flash-any-roms.914938/
SP FLASH TOOL HERE IS A VIDEO:
Click to expand...
Click to collapse
Here is the error i'm getting when trying to flash by the sp flash tool.
The scatter file seems to be a problem
---------- Post added at 11:49 AM ---------- Previous post was at 11:26 AM ----------
Dr23890 said:
Here is the error i'm getting when trying to flash by the sp flash tool.
The scatter file seems to be a problem
Click to expand...
Click to collapse
Unable to upload the direct image here because i get the 'bad request' error.
So here is the picture of the scatter file error : https://imgur.com/a/wyz3ua5
THIS SHOULD HELP YOU WITH THE SCATTER FILE:
IF NOT USE THIS
USE TWRP BUT BEFORE READ THIS: https://androidforums.com/threads/twrp-wont-flash-any-roms.914938/
Big_beef_baby said:
Doogee mix flyme os 7 I am not responsible for any harm done to you device I have tested on mine and it is working
(USE SP FLASH TOOL)
FIRST FLASH TWRP MORE INFO HERE:https://forum.xda-developers.com/doogee-mix/development/test-unofficial-doogee-mix-twrp-t3648831
ROM LINK:
https://mega.nz/#!U74hiIRC!74MTmf9dSlEqmJ9htXSHWbJ8cBqAxARppGBZD469icg
BEFORE UPDATING TO 7.1 FLASH THE ABOVE ROM THEN FLASH UPDATE.ZIP VIA THE SETTINGS OR SP FLASH TOOLS (OREO COMING SOON)
UPADTE.ZIP: https://mega.nz/#!Ru5gTYCC!Yhd9v09yBDa_ooNFvMW5-KSiHLupV_zCL8S4W90zPCc
ALSO I AM WORKING ON PORTING LINEAGEOS SO SUBSCRIBE FOR THAT
Click to expand...
Click to collapse
It looks cool. Did this rom have any bugs?
I will try when the oreo version comes out.
Ersid Kapaj said:
It looks cool. Did this rom have any bugs?
I will try when the oreo version comes out.
Click to expand...
Click to collapse
I an working on a fully stable version i am finishing it also I am working on porting lineageos
Donate to me at: https://www.paypal.me/zaheer2004
Any news on lineage
I want Android O 8.1 in Doogee Mix 2. Please Help me
Big_beef_baby said:
Doogee mix flyme os 7 I am not responsible for any harm done to you device I have tested on mine and it is working
(USE SP FLASH TOOL)
FIRST FLASH TWRP MORE INFO HERE:
https://forum.xda-developers.com/doogee-mix/development/test-unofficial-doogee-mix-twrp-t3648831
ROM LINK:
https://mega.nz/#!U74hiIRC!74MTmf9dSlEqmJ9htXSHWbJ8cBqAxARppGBZD469icg
BEFORE UPDATING TO 7.1 FLASH THE ABOVE ROM THEN FLASH UPDATE.ZIP VIA THE SETTINGS OR SP FLASH TOOLS (OREO COMING SOON)
UPADTE.ZIP:
https://mega.nz/#!Ru5gTYCC!Yhd9v09yBDa_ooNFvMW5-KSiHLupV_zCL8S4W90zPCc
INSTALLING USE SO FLASH TOOLS
EDIT THE SCATTER FILE HERE IS A VIDEO
WITH TWRP JUST REMOVE ZIP SIGNATURE VERIFICATION
ALSO I AM WORKING ON PORTING LINEAGEOS SO SUBSCRIBE FOR THAT
Click to expand...
Click to collapse
Im getting error code 7 while flash in twrp? Can u help?