[ROM] [OFFICIAL] [10.0] [WEEKLIES] OFFICIAL AICP 15.0 for Moto G4 Play - Moto G4 Play ROMs, Kernels, Recoveries, & Other De

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_motorola_msm8916
Device tree common source:
https://github.com/AICP/device_motorola_msm8916-common
Device tree source:
https://github.com/AICP/device_motorola_harpia
Vendor source:
https://github.com/AICP/proprietary_vendor_motorola
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
@jeferson1979 @althafvly @squid2 @@ki @facuarmo
You want to see a "normal" night at the "DEV office", click here!!​
XDA:DevDB Information
OFFICIAL AICP 15.0 FOR MOTO G4 PLAY, ROM for the Moto G4 Play
Contributors
jeferson1979, @ki, althafvly, @facuarmo
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest stock rom
Based On: AOSP, LineageOS
Version Information
Status: Stable
Current Stable Version: 15.0
Stable Release Date: 2020-08-21
Created 2020-08-21
Last Updated 2020-08-21

Reserved

Reserved
Reserved
Changelog: 08-28-20:
- Fixed ambient Display;
- Mediaserver and camera minnor updates.
Download from https://dwnld.aicp-rom.com/ or use the ota updater

https://dwnld.aicp-rom.com/device/harpia/WEEKLY/aicp_harpia_q-15.0-WEEKLY-20200821.zip.html
That's massive development work, Hats off to you.

newinnov said:
https://dwnld.aicp-rom.com/device/harpia/WEEKLY/aicp_harpia_q-15.0-WEEKLY-20200821.zip.html
That's massive development work, Hats off to you.
Click to expand...
Click to collapse
You can bet, under test and development for this results for at least two months

Very fluid, one of the best!
Didn't expect our device to go this far!

I just tested aicp_harpia_q-15.0-WEEKLY-20200911.zip on an XT1607.
Some good news: This is the first Android 10 based rom I've found where AT&T FreedomPop mobile data (LTE) works on my XT1607 (it connects, and setting the APN works). I tested two other recent Android 10 projects' roms from July, LOS 17.1 and AospExtended v7.3, but mobile data is broken on those (it won't connect, regardless of APN). I don't know what you guys did different, but it's good to see it working!
A WiFi bug I've found: When toggling off and on WiFi on the phone while connected to a *hidden* WiFi network, the network is not reconnected to (it shows "not in range" under Saved networks). However, even though the phone does not think the network is in range, I can tap "Connect" under Saved networks and it connects. Similarly, if the router is rebooted while the phone is connected to the hidden network, the phone will *not* reconnect to the hidden network. I have to manually connect to it under Saved networks.
Yes, using a hidden network doesn't actually help with your network security, but this is still a bug.
For comparison, reachomk's AospExtended v6.5 (Android 9) properly reconnects to the hidden network under these circumstances. And, the stock rom (Android 7.1.1) also properly reconnects. The LOS 17.1 (Android 10) build that I tested wouldn't connect to the hidden network at all, so at least yours will manually connect.

Following up, I just tested aicp_harpia_q-15.0-WEEKLY-20201127.zip, and the WiFi hidden network bug I mentioned above is fixed here. For reference, the latest LOS 17.1 still has a bug where a hidden network won't re-connect when the screen is on (not a problem here) so, hopefully, the code can translate over.

This ROM is by far, one of the bests for G4 Play!
Some minor bugs occurring, like animations. The system does not open, re-open or close recent task properly, like no one animation. Back to older windows, the same.
Another bug that I've found, is that the suspend actions doesn't work properly, too. You try to set when display's turn off, turn to 2G or 3G, and it does not occurs.
And more one thing, the LED notifications in some way drain the battery so fast! Turning off, battery works usually.

The PayPal donate link above is broken. According to the AICP website (https://www.aicp-rom.com/) the current donate link is: https://www.paypal.com/paypalme/aicpromcom

i like this rom ,work well congrats but not is functional , dont work the chip 4g , i think this happen because under development , i like the kernel somefeak work with this rom

Great work, very responsive and functional. Really stoked to see this device getting such tremendous support. I did not have any problems w 4g and to my pleasant surprise I'm getting good life out of a battery I was starting to think was toast.

Judging by the response I got from someone in their Discord server, the Android 10 version is only receiving security updates. So, don't expect any broken feature to be fiixed any time soon. Like the LineageOS ROM, this project is good as dead.

MR4Y said:
Judging by the response I got from someone in their Discord server, the Android 10 version is only receiving security updates. So, don't expect any broken feature to be fiixed any time soon. Like the LineageOS ROM, this project is good as dead.
Click to expand...
Click to collapse
Agreed. I guess it all depends on which bugs matter to you, the ones in LOS or the ones in AICP. I did notice that they have AICP 16.1 builds for harpia now. I'll have to test that.

Just tested aicp_harpia_r-16.1-WEEKLY-20210521.zip. I'm seeing crashing of Settings when trying to search settings. It's not completely predictable (sometimes it crashes, and sometimes it doesn't). I'm also seeing that Hidden SSID auto-connect bug again (mentioned back in September) where WiFi won't auto-connect to a hidden network while the screen is on. This would seem to be a regression, since I believe it was working in aicp_harpia_q-15.0-WEEKLY-20201127.zip.

jeferson1979 said:
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_motorola_msm8916
Device tree common source:
https://github.com/AICP/device_motorola_msm8916-common
Device tree source:
https://github.com/AICP/device_motorola_harpia
Vendor source:
https://github.com/AICP/proprietary_vendor_motorola
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
@jeferson1979 @althafvly @squid2 @@ki @facuarmo
You want to see a "normal" night at the "DEV office", click here!!​
XDA:DevDB Information
OFFICIAL AICP 15.0 FOR MOTO G4 PLAY, ROM for the Moto G4 Play
Contributors
jeferson1979, @ki, althafvly, @facuarmo
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest stock rom
Based On: AOSP, LineageOS
Version Information
Status: Stable
Current Stable Version: 15.0
Stable Release Date: 2020-08-21
Created 2020-08-21
Last Updated 2020-08-21
Click to expand...
Click to collapse
After it got ported to aicp 16 [android 11] ui lags a lot. WiFi do not work.

mmortal03 said:
Just tested aicp_harpia_r-16.1-WEEKLY-20210521.zip. I'm seeing crashing of Settings when trying to search settings. It's not completely predictable (sometimes it crashes, and sometimes it doesn't). I'm also seeing that Hidden SSID auto-connect bug again (mentioned back in September) where WiFi won't auto-connect to a hidden network while the screen is on. This would seem to be a regression, since I believe it was working in aicp_harpia_q-15.0-WEEKLY-20201127.zip.
Click to expand...
Click to collapse
This crashes will be fixed soon. About hidden network, it's need to debug. Dramatic changes in android 11

Prabhat_Proxy said:
After it got ported to aicp 16 [android 11] ui lags a lot. WiFi do not work.
Click to expand...
Click to collapse
Eh, wifi works here, please review your setup. About ui, I'm doing the possible to enhance, not that easy in a dead platform as our arm 32

I flashed the aicp 16.0 ROM and openGapps 11.0 beta three days ago, and for now it run very fine, but the battery draining fast and have some lag.

This ROM for me now has random freezing and lagging moments. There are point where the phone will even hang for a few seconds. A lot of features are also incomplete or have half implementations, like the gesture navigation, which works fine on 17.1 but not on this ROM.

Related

[ROM][10.0][OFFICIAL]Android Ice Cold Project[AICP-15.0][Potter][WEEKLY]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps: https://opengapps.org/
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source: https://github.com/AICP/kernel_motorola_potter
Device tree source: https://github.com/AICP/device_motorola_potter
Vendor source: https://github.com/AICP/proprietary_vendor_motorola
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds​
XDA:DevDB Information
AICP OFFICIAL, ROM for the Moto G5 Plus
Contributors
abhijit1998
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest Stock Oreo Firmware
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 15.0
Stable Release Date: 2020-04-26
Created 2019-11-13
Last Updated 2020-06-07
BUGS
~ Flash light toggle / Chop Chop Gesture (in camera flashlight working fine)
~Camera may be unstable
~Many more (ig)
This is Initial Build. Many source side features are not added yet. It maybe unstable.​
DOWNLOADS
Date: 13/11/2019
main | mirror
MD5: 58fcd8ffc24409670353ba748449c88d
GAPPS
OpenGApps
[I used nano one. Don't know about others]
MAGISK
here
uWu....nice. Gonna flash next year... ;p
Shivvvv said:
uWu....nice. Gonna flash next year... ;p
Click to expand...
Click to collapse
me too...
abhijit1998 said:
me too...
Click to expand...
Click to collapse
Peru
stark1296 said:
Peru
Click to expand...
Click to collapse
Emmm
Deadpool 61 said:
Emmm
Click to expand...
Click to collapse
Kek
clean flash ... boot looping not at all working..
i restarted phone after waiting 4-5 minutes and phone booted and both sim cards are not showing any signal " NO service " when i tried to make call i got prompt that turn off the airplane mode which was never turned on ... hope it will get fixed
regards
pintspin said:
clean flash ... boot looping not at all working..
i restarted phone after waiting 4-5 minutes and phone booted and both sim cards are not showing any signal " NO service " when i tried to make call i got prompt that turn off the airplane mode which was never turned on ... hope it will get fixed
regards
Click to expand...
Click to collapse
When I tried all worked fine... try clean flashing again
any upcoming updates????
UPDATE
aicp 15.0 unofficial
Date: 24/12/2019
Download: pling | gdrive​
Another Great Rom Dude, No Bugs At all, Using This as a Daily Driver Now.
UPDATE
aicp 15.0 unofficial
Date: 31/01/2020
Download: pling | SourceForge ​
Thank you for the update.- Excellent ROM. .
Runs flawlessly.
environmental display does not work for me
Two Little bugs I still face :
Both sim places are interchanged in Statusbar and Batter saver QS tile doesn't work on one tap!
Else This is really Great, Haven't moved to any other!
Update 23-02-2020
aicp 15.0 unofficial
Date: 23/02/2020
Changelogs:
~February 2020 Security Patch
~User Build
~Enforcing Build
Download: pling | SourceForge ​
Rutambh said:
Two Little bugs I still face :
Both sim places are interchanged in Statusbar and Batter saver QS tile doesn't work on one tap!
Else This is really Great, Haven't moved to any other!
Click to expand...
Click to collapse
saw the Battery Saver QS tile. Its not working. Its ROM source side issue.
Does this ROM support signature spoofing? I want to run microg / nogapps. Thanks!

[ROM][11.0.0][Hima] Android Ice Cold Project 16.1 [Official]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we was based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
For Android 11 we are now full AOSP-based.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Download-Links:
ROM: https://dwnld.aicp-rom.com/
TWRP: https://dl.twrp.me/hima/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
What's working
-wifi
-mobile data
-camera
-bluetooth
-NFC
-audio
-GPS
-mobile data signal strength
What's not working
You tell us!
FAQ:
Before using the ROM:
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet released for Pie, however you can try to use edxposed .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android 11. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk canary
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
GitHub - AICP/kernel_htc_msm8994
Contribute to AICP/kernel_htc_msm8994 development by creating an account on GitHub.
github.com
Device tree source:
GitHub - AICP/device_htc_hima
Contribute to AICP/device_htc_hima development by creating an account on GitHub.
github.com
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:[/B]
@Claymore1297
@k4y0z
@eyosen
The following information is ONLY needed if you are not opening up a devdb thread on XDA!
ROM OS Version: 11.0 Android 11
Kernel: Linux 3.10.108
Requirements
HTC Firmware: 4.x
TWRP: 3.4.0
Version Information:
Status: BETA
Release Date: 11-11-2020
You want to see a "normal" night at the "DEV office", click here!!​
XDA:DevDB Information
AICP 16.1, ROM for the HTC One (M9)
Contributors
Claymore1297, eyosen, k4y0z
ROM OS Version: Android 11
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: AOSP
Version Information
Status: Alpha
Created 2020-10-11
Last Updated 2020-11-01
*reserved*
*reserved*
reserved
here we go....
We worked hard the last days to bring Android 11 aka R on this phone.
Currently more or less all is working so far
We put also a compatible GAPPS-Package on the server - see OP.
This build is a first test-build AICP-Extras are missing so far.
Enjoy!
Claymore1297 said:
here we go....
We worked hard the last days to bring Android 11 aka R on this phone.
Currently more or less all is working so far
We put also a compatible GAPPS-Package on the server - see OP.
This build is a first test-build AICP-Extras are missing so far.
Enjoy!
Click to expand...
Click to collapse
Great job.
WOW, Thank you all. Installed and tested. It is stable and the speed of installing apks is much faster than Android 10.
No ETA and I can wait for it.
Huge thanks to you and your Team Claymore, you're best
That is great Jullian, thank you very much. It is installed with no problems at all. I had to install Magisk-21 to get it rooted. So far, it seems that all my user apps are working without problems. Thank you & team again, keep the great work.
Kudos to you guys for your hard work
Magisk Canary Channel thread was closed, any other root suggestions?
Hello Great developers,
I just found out that all applications that requires location are not successful to acquire it. I am sure you will find a solution.
Ta.
tombbb said:
Magisk Canary Channel thread was closed, any other root suggestions?
Click to expand...
Click to collapse
The official stable Magisk V21.0 has already supported Android 11:
https://topjohnwu.github.io/Magisk/changes.html
You can download them here:
https://github.com/topjohnwu/Magisk/releases
Also you can use canary if you still want to:
https://github.com/topjohnwu/magisk_files/blob/canary/app-debug.apk
https://github.com/topjohnwu/magisk_files/blob/canary/magisk-debug.zip
https://github.com/topjohnwu/magisk_files/blob/canary/magisk-uninstaller.zip
http://www.wklejto.pl/861360 Recovery Log
http://www.wklejto.pl/861362 Dmes Log
http://www.wklejto.pl/861364 OpenGaaps
I installed this ROM in Himaul M9 and i have few question about it for creators
1. I cannot install Magisk .zip (Magisk-v20.4(20400)) when i trying install it from recovery 3.4.0.0 everything is good but after restart magisk still show me only problems with correct install .
Second install try is magisk app menu and donload/choice a file to install it the android system is trimmed earlier, it does not look like the original A11 release from google - there is none of the novelties announced by G in it, it is not polished enough so that version 15.0 is a fully satisfactory system. Magisk safety test: Failed -basicintegrity - 0 , cts profile- 0, evalType BASIC.
2.The setting menu in the gallery - black screen does not work.
Phone security - crash when selected from the menu.
Gaaps does not contain basic applications, you have to install them separately.
The camera is only an empty shell of this function and is useless.
@Claymore1297, hello and thanks for your work for hima! In Android 11 I have same issue I had in 10 (both AICP and LOS). When anyone calls on my M9, person who calls hear echo of him/herself. I haven't seen any person who wrote about such issue. Stock rom is fine. Maybe you could write any suggestions how to fix this. I may take a log but not sure if it will help. Thanks!
Clamor said:
[MENTION=8276284]Claymore1297[/MENTIONWhen anyone calls on my M9, person who calls hear echo of him/herself. I haven't seen any person who wrote about such issue. Stock rom is fine.
Click to expand...
Click to collapse
I have repeatedly written about such a problem, and the problem is not in the microphone, since the problem is both mine and my daughter's, and everything is fine on the stock firmware. Ось такі от справи
tiratored said:
I have repeatedly written about such a problem, and the problem is not in the microphone, since the problem is both mine and my daughter's, and everything is fine on the stock firmware. Ось такі от справи
Click to expand...
Click to collapse
Yes I know this ...
The issue only appeared to une device here - all others are working.
The device, it appeared was a cheap chinese copy of himaul - and parts where missing here.
All other devices don't have the issue.
Can you guys tell me (again) which firware version and model you have.
Himawhl sprint, not Chinese.
In this firmware, the dialer does not work for me.
tiratored said:
Himawhl sprint, not Chinese.
In this firmware, the dialer does not work for me.
Click to expand...
Click to collapse
you will get later a working version - today hopefully
imknown said:
The official stable Magisk V21.0 has already supported Android 11:
https://topjohnwu.github.io/Magisk/changes.html
You can download them here:
https://github.com/topjohnwu/Magisk/releases
Click to expand...
Click to collapse
Thank you!!:laugh:

[rom][unofficial] aicp 15.0 [15/11/20]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://drive.google.com/file/d/1VKq5ECDmzv19W28e9ZA7TErWmrhFwoLS/view?usp=sharing
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1 Make sure you were on miui before or LOS
2 Format data before flashing
3 Reboot recovery
4 Flash ROM
5 Format data
6 Reboot recovery
7 Flash gapps if you want
8 Reboot to system
Adivced to use cn twrp
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Attention, this rom is not based on LinegeOS Device Tree or EvolutionX device tree
Kernel source:
http://bigota.d.miui.com/V12.0.8.0.QJKCNXM/miui_LMI_V12.0.8.0.QJKCNXM_fef952411e_10.0.zip
Device tree source:
https://github.com/Official-Ayrton990/device_xiaomi_lmi
Vendor source:
: https://github.com/Official-Ayrton990/vendor_xiaomi_lmi
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds​Thanks list:
KONA-DEVS (Nakatomi, raystef66 and Mr. Mesquita for their help on debuggin)
To Sebastiano Barezzi for the dumped kernel and sepolicy fixup
To @TeamMex for helping me on DT development
XDA:DevDB Information
AICP, ROM for the Xiaomi Poco F2 Pro (Redmi K30 Pro)
Contributors
Ayrton990
Source Code: https://github.com/Official-Ayrton990/device_xiaomi_lmi
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Created 2020-10-12
Last Updated 2020-10-19
Installation process:
Make sure you were on miui before or LOS
Format data before flashing
Reboot recovery
Flash ROM
Format data
Reboot recovery
Flash gapps if you want
Reboot to system
It's adviced to use chinese TWRP for the process use TWRP_FLASH.zip
BUGS:
Lockscreen is brights at max when FOD unlock method is activated (will be fixed soon)
dt2w still broken
autobrightness is kinda bugged
@Ayrton990
Nice job too my friend :good:
Good job @Ayrton990! What's the SELinux status?
Nice was going to try but FOD is a must.
Good job mate =D
i understand recommended to use chinese TWRP, but please at least post the file or link to the chinese TWRP.
New Update is out!
Changelog:
Partially fixed FOD; recognizes faster the fod when pressing the sensor but it makes the lockscreen be bright all the time (This will be fixed soon)
Reduced log on the rom by making userdebug builds instead of eng (not more experimental builds anymore)
Enable FOD customization options on AICP Extras
Enable Night Light on screen settings
Enable screen colors (Natural, Boosted or Adapted)
Check second post to see current bugs please
Download here: https://drive.google.com/file/d/1QkRRpCAvjjEa5K897SVGR6fL_jPlwmNK/view?usp=sharing
Donate here: www.paypal.me/ayrton990
NOTE: This is an original project development
Regards, Ayrton.
RyonanGT said:
i understand recommended to use chinese TWRP, but please at least post the file or link to the chinese TWRP.
Click to expand...
Click to collapse
Check second post again, I hope to not have problems because of a closed source TWRP was shared here.
wierd thing signal is weak in this rom
ziad-fekry said:
wierd thing signal is weak in this rom
Click to expand...
Click to collapse
is not weak, is the true signal capacity man, not fake one or unrefreshed icon
Great work
Thanks for hard work.. really appreciated
Awesome
this used to be my goto rom on my op3 & poco f1, glad to see it here, thank you. any possibility of adding alarm/wakelock blocker?
dead0 said:
this used to be my goto rom on my op3 & poco f1, glad to see it here, thank you. any possibility of adding alarm/wakelock blocker?
Click to expand...
Click to collapse
Until Custom kernel works without bugs (I'm working on it) this feature will be working, with miui perf its not possible.
Ayrton990 said:
Until Custom kernel works without bugs (I'm working on it) this feature will be working, with miui perf its not possible.
Click to expand...
Click to collapse
thank you.
ps have noticed on latest build, after installing magisk, unable to add any modules, even after giving storage permission. the same magisk build build works fine on evo/crdroid
New UNOFFICIAL update of AICP is out
Changelog:
- Implemented dt2w (Enable it on screen settings)
- Imported powehal from LA.UM.8.12.r1-11900-sm8250.0
- Fod improvements
- Fixed SafetyNet now rom passes safetynet without MagiskHide or other Modules (Also switched to basic EvalType instead of HARDWARE)
- Fixed Magisk modules not working
- Enabled Camera v2 API for Snapcamera and support for GCam
Download here: https://drive.google.com/file/d/1a2RVigoUgemP06xJkEUQfcqOs6tZvqko/view?usp=sharing
Donate here: https://paypal.me/ayrton990
Device tree source updated: https://github.com/Official-Ayrton990/device_xiaomi_lmi
NOTE: This ROM is built with my own device tree.
Soon I hope next update we can enjoy SELinux Enforcing and FOD without high brightness bug.
Regards, Ayrton.
Great rom, but rom don't pass safetynet.
cholete89 said:
Great rom, but rom don't pass safetynet.
Click to expand...
Click to collapse
Use MagiskHide Props and force set attestation to basic.
It passes with me, use latest update. I checked with magisk also check screenshot on OP

[ROM] [TREBLE] [11.0] [Official] AICP 16.1 (Pro3 aka zl1, zl0, X727,X720,X722)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Test builds:
https://evensharksneedwater.com/aicp/mosimchah/zl1/11/
Mirror: https://drive.google.com/drive/folders/14XFfejcvr3tA4Eg8x-uYgMu2ztl-lZQ7?usp=sharing
20s firmware https://androidfilehost.com/?w=files&flid=165490
If you're dirty flashing, you might need to delete the locksettings.db file in /data/system
TWRP:
[RECOVERY][OFFICIAL] TWRP for the leeco le pro3 (x727,x720,x722,zl1,zl0)
#include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...
forum.xda-developers.com
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal GApps packages still have issues, however feel free to try other GApps if you want to, just try MindTheGapps if you have any GApps related issues
MindTheGapps: https://androidfilehost.com/?w=files&flid=322935
Mirror: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM zip file.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device, enable developer settings and in them, OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices, you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
GitHub - AICP/kernel_leeco_msm8996 at r11.1
Contribute to AICP/kernel_leeco_msm8996 development by creating an account on GitHub.
github.com
Device tree source:
GitHub - AICP/device_leeco_zl1 at r11.1
Contribute to AICP/device_leeco_zl1 development by creating an account on GitHub.
github.com
GitHub - AICP/device_leeco_msm8996-common
Contribute to AICP/device_leeco_msm8996-common development by creating an account on GitHub.
github.com
Vendor source:
Follow this guide if you want to extract the vendor blobs: https://wiki.lineageos.org/extracting_blobs_from_zips.html
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
andr68rus,
infrag,
darkobas,
jrior001,
codeworkx,
villarleg,
ThE_MarD,
Lucchetto00,
mosimchah
Information:[/U[
ROM OS Version: 11.x
Kernel: Linux 3.18.140
ROM {Firmware|Vendor} required: 20s or newer
Status: STABLE
Release Date: 12-22-2020
You want to see a "normal" night at the "DEV office", click here!!​
reserved
This is fabulous! Possible to dirty flash from 15?
New test build,
Changes:
1. Added back the button lights settings
2. Fully fixed IR, credit to @ThE_MarD
3. The rom should now be able to boot without gapps installed (still fine with gapps of course), credit to @ThE_MarD
Download:
https://evensharksneedwater.com/aicp/mosimchah/zl1/11/aicp_zl1_r-16.1-EXPERIMENTAL-20201224.zip
md5:
https://evensharksneedwater.com/aicp/mosimchah/zl1/11/aicp_zl1_r-16.1-EXPERIMENTAL-20201224.zip.md5sum
FedEx UPS said:
This is fabulous! Possible to dirty flash from 15?
Click to expand...
Click to collapse
haven't tried so I can't say for sure, I'd say make a backup in twrp before trying that though
mosimchah said:
haven't tried so I can't say for sure, I'd say make a backup in twrp before trying that though
Click to expand...
Click to collapse
Dirt flashed, so far so good! Thanks for the special Christmas gift and happy holidays!
I've installed this rom in my Zl0 and i noticed a bit of lag, also fingerprint isn't working and proximity sensor on calls. Didnt test notification light. Also in charge battery bar isnt going low just the percentage does. How can i enable my torch while screen is off and press continuously the power button? already assigned the button in the menu. Other than that rom is clear and neat. Thank you
**update my phone was after a qfil recovery and i cant operate fingerprint, proximity, auto rotate and flashlight. So its not of this specific rom related as i tested other roms i used in the past. Has anyone has an idea how to repair ?
Mobile Hotspot not working with security enabled (WPA2-Personal) - only disabled/nonsecure WIFI works. Had to go back to older version (15.0). FYI, tried with the new Lineage pre-release as well and same issue with hotspot.
Noitced - that hotspot shows one device connected for a few seconds then disconnected and get the message that failed to authenticate and will need to retry to enter password again.
The battery icon in the status bar doesn't show the actual battery level always full. Opening "Google Services & preferences" and Digital Wellbeing detail statistics always crash. The last one may or may not related to the GApps. I use FlameGApps as recommended. Haven't thoroughly tested other functions.
Gave this a go with a clean flash. Does the basic gapps not include a camera app? Not seeing it but otherwise working well.
On my phone Camera and Fingerprint didn't work after clean flashing of Android 10 or 11 ROM. You first need to wipe System, Cache, Davlik and Data, and then format Data. After that flash Android 9 (for example LineageOS 16 or AICP 14), and when that ROM boots go back to TWRP, do Factory Reset and then flash Android 10 or 11 ROM and Camera and fingerprint will work.
MasterChief2 said:
On my phone Camera and Fingerprint didn't work after clean flashing of Android 10 or 11 ROM. You first need to wipe System, Cache, Davlik and Data, and then format Data. After that flash Android 9 (for example LineageOS 16 or AICP 14), and when that ROM boots go back to TWRP, do Factory Reset and then flash Android 10 or 11 ROM and Camera and fingerprint will work.
Click to expand...
Click to collapse
Thanks tried this still didn't work. Not sure what to do at this point. Pretty sure I'm on 20S firmware although I'm not seeing where that is in the phone settings.
Have any of u succeeded on installing magisk? I've tried both the latest versions and the 20.3 that says above and the manager does not recognise the root. If I use a magisk remover zip upon the shell it says magisk installation found and proceed normally. But on manager nothing . thanks in advance
Update: the beta 21.2 with the canary version of manager worked like charm
Timmons said:
Thanks tried this still didn't work. Not sure what to do at this point. Pretty sure I'm on 20S firmware although I'm not seeing where that is in the phone settings.
Click to expand...
Click to collapse
Timmons said:
Thanks tried this still didn't work. Not sure what to do at this point. Pretty sure I'm on 20S firmware although I'm not seeing where that is in the phone settings.
Click to expand...
Click to collapse
you didnt do it correctly then, it does work, boot android 9 clean then you can go back to twrp and flash whatever
On x722 I didn't do any of the above. I was on aicp 10 and I just wiped data,system,dalvik,art,and cache, installed the ROM , gapps, booted, installed magisk. I saw some strange battery drains, I installed the latest black screen kernel and everything works like charm.
new twrp builds are out, I am now the official maintainer https://forum.xda-developers.com/t/...leeco-le-pro3-x727-x720-x722-zl1-zl0.4217101/
mosimchah said:
new twrp builds are out, I am now the official maintainer https://forum.xda-developers.com/t/...leeco-le-pro3-x727-x720-x722-zl1-zl0.4217101/
Click to expand...
Click to collapse
Great job. Thanks mosimchah
New build,
Changes:
1. Cleaned up the dependencies for the fingerprint blobs
2. Cleaned up the dependencies for the camera blobs
3. Fixed the hotspot not fully working, credit to @ThE_MarD
4. Added back live display
5. Added back pulse
6. Added optional navbar styles
7. Added some power menu options
8. Added back the Phonograph music player from Omni
9. Improved the "about device" section in settings
10. Added an option to switch between Celsius and freedom units for the lock screen charging info
11. Gesture nav additions and improvements
12. Lots of misc fixes, additions, and improvements
Full changelog:
dogbin - livedisplay-r
==================== 01-16-2021 ==================== * frameworks/base 41a4baab5c48 fwb:co
del.dog
Download:
https://evensharksneedwater.com/aicp/mosimchah/zl1/11/aicp_zl1_r-16.1-EXPERIMENTAL-20210116.zip
md5:
https://evensharksneedwater.com/aicp/mosimchah/zl1/11/aicp_zl1_r-16.1-EXPERIMENTAL-20210116.zip.md5sum
On the new testbuild there is no turning off button, only restart.

[ROM] [TREBLE] [12.1] [Pre-Official] AICP 17.1 (Pro3 aka zl1, zl0, X727,X720,X722)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
Download link: https://host.erwanleboucher.fr/mosimchah/zl1/aicp/12/test/
Mirror
aicp_zl1_s-17.1-WEEKLY-20220710.zip
drive.google.com
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
20s firmware https://androidfilehost.com/?w=files&flid=165490
If you're dirty flashing, you might need to delete the locksettings.db file in /data/system
TWRP:
[RECOVERY][OFFICIAL] TWRP for the leeco le pro3 (x727,x720,x722,zl1,zl0)
#include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...
forum.xda-developers.com
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal GApps packages still have issues, however feel free to try other GApps if you want to, just try MindTheGapps if you have any GApps related issues
MindTheGapps: https://androidfilehost.com/?w=files&flid=322935
Mirror: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
The fingerprint might not work on the setup wizard, it will work from the settings app though
you will get a warning on boot, just ignore it
Selinux is on permissive for now
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM zip file.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device, enable developer settings and in them, OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices, you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_leeco_msm8996/tree/s12.1Device tree source:
https://github.com/AICP/device_leeco_zl1/tree/s12.1
GitHub - AICP/device_leeco_msm8996-common at s12.1
Contribute to AICP/device_leeco_msm8996-common development by creating an account on GitHub.
github.com
selinux permissive: https://gerrit.aicp-rom.com/c/AICP/device_leeco_msm8996-common/+/115013
Vendor source:
Follow this guide if you want to extract the vendor blobs: https://wiki.lineageos.org/extracting_blobs_from_zips.html
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
andr68rus,
infrag,
darkobas,
jrior001,
codeworkx,
villarleg,
ThE_MarD,
Lucchetto00,
CrisBalGreece,
mosimchah
Information:[/U[
ROM OS Version: 12.1
Kernel: Linux 3.18.140
ROM {Firmware|Vendor} required: 20s or newer
Status: TEST
Release Date: 5-3-2022
You want to see a "normal" night at the "DEV office", click here!!
reserved
Reserved
Cool S1, convert to zl1. RIL not work on this rom
NikitaCik said:
Cool S1, convert to zl1. RIL not work on this rom
Click to expand...
Click to collapse
Here's a new build to fix RIL https://host.erwanleboucher.fr/mosimchah/zl1/aicp/12/test/aicp_zl1_s-17.1-WEEKLY-20220505.zip thanks to @CrisBalGreece for giving me the fix
mosimchah said:
Here's a new build to fix RIL https://host.erwanleboucher.fr/mosimchah/zl1/aicp/12/test/aicp_zl1_s-17.1-WEEKLY-20220505.zip thanks to @CrisBalGreece for giving me the fix
Click to expand...
Click to collapse
Aicp Extras-buttons and Gestures -- not work
Wow, this is cool. Will try to install it. Is material you supported? Thank you Moshe.
I have installed it and it seems the LTE or WCDMA doesn't work. I can only have EDGE. Anybody else can confirm this?
@mosimchah
The download link doesn't work. Can it be corrected?
Thanks!
tanuse said:
@mosimchah
The download link doesn't work. Can it be corrected?
Thanks!
Click to expand...
Click to collapse
Latest link does work allright
New build, fixed a lot, no more error message on boot, brought back button settings, lots more https://host.erwanleboucher.fr/mosimchah/zl1/aicp/12/test/aicp_zl1_s-17.1-WEEKLY-20220710.zip
Edit: mirror https://drive.google.com/file/d/1PurmU6GrddpuTthB72iCT2RETsAUPeOs/view?usp=sharing
Hi, does anyone know what this status bar icon is for in aicp 17.1?, and if so is there a setting to disable it? Thanks
Skippy12359 said:
Hi, does anyone know what this status bar icon is for in aicp 17.1?, and if so is there a setting to disable it? Thanks
Click to expand...
Click to collapse
Interestingly, with my network provider the triangle is always displayed in gray color, as if indicating there is no signal, while yours is black, like indicating full signal. But I also don't know the purpose of the icon.
sanshisui said:
Interestingly, with my network provider the triangle is always displayed in gray color, as if indicating there is no signal, while yours is black, like indicating full signal. But I also don't know the purpose of the icon.
Click to expand...
Click to collapse
Thanks for the feedback. First time I've seen it in a ROM and just can't seem to find any information on it or find any setting in aicp ,17.1 to disable it. Kinda getting used to it now I guess.
mosimchah said:
New build, fixed a lot, no more error message on boot, brought back button settings, lots more https://host.erwanleboucher.fr/mosimchah/zl1/aicp/12/test/aicp_zl1_s-17.1-WEEKLY-20220710.zip
Click to expand...
Click to collapse
Thank you for the new build. LTE is working now, but the battery is draining too fast.
mosimchah said:
New build, fixed a lot, no more error message on boot, brought back button settings, lots more https://host.erwanleboucher.fr/mosimchah/zl1/aicp/12/test/aicp_zl1_s-17.1-WEEKLY-20220710.zip
Click to expand...
Click to collapse
Hello everyone,
can someone please reupload this zip file from 20220710? The server oder the file isn´t available at erwanleboucher.fr.
Thanks and best regards
GerWonder said:
Hello everyone,
can someone please reupload this zip file from 20220710? The server oder the file isn´t available at erwanleboucher.fr.
Thanks and best regards
Click to expand...
Click to collapse
Sure https://drive.google.com/file/d/1PurmU6GrddpuTthB72iCT2RETsAUPeOs/view?usp=sharing
Wow, thank you for that quick response. Download is running.
I am using the latest ROM with NikGApps with default AICP launcher. At first, it run well then I turned off the phone for a few days. A couple days ago, I just turned it on again and I couldn't pass the lock screen. After I make the right pattern, it will get back to the lock screen again instead of the home screen.
Anybody else experience the same thing? That was not the first time I experienced this.
Does the launcher crash, or is it because the pattern/Pin/fingerprint is wrong?
Launcher crash: clear cache/dalvik from recovery
wrong pattern/Pin/fingerprint:
Remove /Bypass Lockscreen With Recovery
Recently when i restored my data using TWRP i faced a problem at lock screen. I was not able to unlock my phone with the pin i set Earlier..So after so many attempts i was able to find a solution for that problem.(works with pattern,pin etc)...
forum.xda-developers.com

Categories

Resources