hey guys I am wondering if anyone of you got the security update for august in europe or in USA.
thanks in advance.
Not yet here in europe
Nope, nothing yet.
Just got the update. Downloading.
????
Mine says February...
I was able to get the update by using a vpn set to germany
Nothing here in Global variant
Edit: Update is available now.
September security patch is rolling for Global variant now.
Incat said:
I'm still on 12 0 1 with June security patch.
How do I get the update.?
Click to expand...
Click to collapse
EEA? Change region for india, install update and then revert this change ;P
Wysłane z mojego Mi 10 przy użyciu Tapatalka
I just got some control center update, but no October security patches yet.
Incat said:
What's eea.?
I already tried changing the region to India.
I'm not even sure if its due an update, but June security patch seems a bit old.
Presumably something with come over air eventually?
Click to expand...
Click to collapse
EEA is the European version of the software.
Wysłane z mojego Mi 10 przy użyciu Tapatalka
Related
ello to al xda,, ok this is my problem
After i installed TWRP everything was ok. But when i flashed the SuperSU for root, everything worked except the camera.. It shows a sign that says that camera is busy, im not using it, i rebooted a lot of times, i cleaned the cache,, and i installed a custom kernel that was supossed to resolve that problrm.. But everything is on the same.
Can somebody help me?? Please
Im on 5.0.2
Im a new user also
Flash 5.1 stock rom
Wysłane z mojego XT1524 przy użyciu Tapatalka
blacksh4dow said:
Flash 5.1 stock rom
Wysłane z mojego XT1524 przy użyciu Tapatalka
Click to expand...
Click to collapse
My device is the xt1527 its available?
I've found a few errors on Marshmallow for PLK-L01, which I installed manually, and, like happened to many people, It gave me an error while updating, but then it booted with the new version as nothing happened.
My question is: what if these errors I've found are due to the manual installation? And then, would it be possible to rollback from B330b to B180 in order to get the OTA? (assuming that the errors are caused by what I mentioned)
You should have been updated once more after you got the error message.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
krisu253 said:
You should have been updated once more after you got the error message.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Click to expand...
Click to collapse
I simply followed the instructions given by Honor in their PDF, it didn't say nothing about updating twice.
Yup I know there is nothing about that, but it was discused before at this forum. You should just copy the update.app file again to the dload folder, then write in the dialpad *#*#2846579#*#* and check the software update.
Also if the first update didn't erase all your data there is a big possibility that this time it will.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
krisu253 said:
Yup I know there is nothing about that, but it was discused before at this forum. You should just copy the update.app file again to the dload folder, then write in the dialpad *#*#2846579#*#* and check the software update.
Also if the first update didn't erase all your data there is a big possibility that this time it will.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Click to expand...
Click to collapse
Should I update now again? It did erase my data. I've been able to use my phone, the errors were notifications, esentially. Fixed by using Google Now Launcher
You should update and this time it should go up to the 100%. If the bugs will still be present then you can try to downgrade to the B121 and wait for the OTA. But I'm on the B330 and don't have any problems with notifications
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
krisu253 said:
You should update and this time it should go up to the 100%. If the bugs will still be present then you can try to downgrade to the B121 and wait for the OTA. But I'm on the B330 and don't have any problems with notifications
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Click to expand...
Click to collapse
Thanks a lot. Do you see the lock button on the tools folder, like the one in Lollipop?
Nope, it is gone but it is available on the custom launchers as Nova e.g. This is wierd but it is like that since the B320. Don't really know why
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
krisu253 said:
Nope, it is gone but it is available on the custom launchers as Nova e.g. This is wierd but it is like that since the B320. Don't really know why
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Click to expand...
Click to collapse
And then, just to make sure and end this, can I update from the same version i want to update, can't I?
Yep
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Hello everyone
who tried this firmware?
I'm going to try it tonight when I come home from work I'll be back in the day tomorrow
:good:
gismoboss13 said:
Hello everyone
who tried this firmware?
I'm going to try it tonight when I come home from work I'll be back in the day tomorrow
:good:
Click to expand...
Click to collapse
A few days ago I installed BLA-L29 8.0.0.127(C432) from funkyhuawey. I cannot remember if the particle 'a' was in the name of release. Later it did not appear on FH listing and today i see it as you mention. I don't know if mine was an early release and if it had any bugs...but I am using it with no noticeable problems!
Later I will try to flash BLA-L29 8.0.0.127a(C432) on Hisuiteand see if it is identified as a new version
Ok thanks for your come back ! I try after this FW
I installed it today. Working great.
Phone originally on purchase: BLA-L09 8.0.0.115 (C432)
Now showing: BLA-L09 8.0.0.127 (C432)
So it doesn't effect the BLA number.
Hello,
Where can we download it?
I used Funky Huawei.
Arthur Hucksake said:
I used Funky Huawei.
Click to expand...
Click to collapse
Mirror?
Enviado desde mi ONEPLUS A5000 mediante Tapatalk
https://funkyhuawei.club
sounds like a (for alpha)
virtyx said:
sounds like a (for alpha)
Click to expand...
Click to collapse
a isn't for alpha. They released 127 then fixed a bug and called it 127a internally. On the About Phone screen it might be called 127 without the a.
duraaraa said:
a isn't for alpha. They released 127 then fixed a bug and called it 127a internally. On the About Phone screen it might be called 127 without the a.
Click to expand...
Click to collapse
That's it, i had flashes previous 127 version (but no bug noticed) and now I have flashed new 127a, and on about phone sections there is no mention to 'a'
If the new firmware is approved for instalation (I found it on Huawei Firmware Finder), does it mean then that we will soon receive OTA? Sorry for the question but after 8 years with Samsung flagship phones I don't know how it looks like with Huawei[emoji6]
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
kuleczka1983 said:
If the new firmware is approved for instalation (I found it on Huawei Firmware Finder), does it mean then that we will soon receive OTA?
Click to expand...
Click to collapse
I also see that installation for my IMEI is approved but there is a problem when i try to download by proxy.
edit
Managed to update through FF and proxy by using mobile data to download the update. So far so good.
@up I've watched a few tutorials on YouTube how to do it, but I'm still a little bit afraid. I prefer to install this firmware via official OTA, but I don't know how long it will take until Huawei will release it...
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
i have mate 10 pro BLA-L09 8.0.0.115(C432)
and i don't see any update???
Regionella said:
i have mate 10 pro BLA-L09 8.0.0.115(C432)
and i don't see any update???
Click to expand...
Click to collapse
Use the Firmware Finder app to update! You should choose BLA-L09 8.0.0.127a (C432) FullOTA firmware and use the In-App Proxy to update (you can find the instructions in the app)
Pretoriano80 said:
Use the Firmware Finder app to update! You should choose BLA-L09 8.0.0.127a (C432) FullOTA firmware and use the In-App Proxy to update (you can find the instructions in the app)
Click to expand...
Click to collapse
Hi, I have Pro version and if I will flash FullOTA firmware via Firmware Finder I won't lose (wipe) my data?
Grigorijs said:
Hi, I have Pro version and if I will flash FullOTA firmware via Firmware Finder I won't lose (wipe) my data?
Click to expand...
Click to collapse
you won t lose your data!
Ok. I am after instalation via Firmware Finder. Everything works fine and I don't see any issues with the system. So you can easily upload that firmware straight into your phones.[emoji6]
I also don't have any issues with YouTube and Messenger now.
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
İnstalled the 127 (c432) without any problem. Changed the dns and voila, firmware update appeared.
Sent from my [device_name] using XDA-Developers Legacy app
Out of the blue I got 163(432) through regular update. I guess just July security patches.
July security patches and EIS for 1080p 30 fps is all.
iamsabresh said:
July security patches and EIS for 1080p 30 fps is all.
Click to expand...
Click to collapse
That came with 162 for me
wmfreak said:
That came with 162 for me
Click to expand...
Click to collapse
162 was June patches and EIS. Many didn't receive the 162 update and got the 163 update directly with July patches and EIS
iamsabresh said:
162 was June patches and EIS. Many didn't receive the 162 update and got the 163 update directly with July patches and EIS
Click to expand...
Click to collapse
I see
And here I am still waiting for it still on 160 May patch.
Danfenn said:
And here I am still waiting for it still on 160 May patch.
Click to expand...
Click to collapse
I was on May patch too man. Got the July one directly just last week
I upgraded from 160 to 163 today too. But I had to tap menu in System update app and choose to download complete package, otherwise it didn't offer me any updates.
jenda.69 said:
I upgraded from 160 to 163 today too. But I had to tap menu in System update app and choose to download complete package, otherwise it didn't offer me any updates.
Click to expand...
Click to collapse
To anyone who hasn't received the update, try this... May work
iamsabresh said:
To anyone who hasn't received the update, try this... May work
Click to expand...
Click to collapse
Is that method erasing user data?
Wysłane z mojego BKL-L09 przy użyciu Tapatalka
jenda.69 said:
I upgraded from 160 to 163 today too. But I had to tap menu in System update app and choose to download complete package, otherwise it didn't offer me any updates.
Click to expand...
Click to collapse
hope that didn't erase your data
PowerHero said:
hope that didn't erase your data
Click to expand...
Click to collapse
I just made it and it doesn't erase user data
Wysłane z mojego BKL-L09 przy użyciu Tapatalka
marek_poland said:
I just made it and it doesn't erase user data
Wysłane z mojego BKL-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
thank you
marek_poland said:
Is that method erasing user data?
Wysłane z mojego BKL-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
No, it won't erase data if you update via the system updater, unless you flash the full firmware manually
Hi to all I want to ask if someone make this update H85030F and what changes has been done to the software if there is any or just a security update...
Sent from my LG-H830 using Tapatalk
As far as I could try on my phone, it's just a security update, but there are some features of the phone that I rarely use, so I cannot be 100% sure. By the way, it's not a major feature update, mostly a security and/or bugfix update.
Try delete the password when you lock the gallery i report this bug for support LG in last update v30a ? . If you create password for lock gallery and you forgot it you can't delete it or charge . I create password and i don't use it for lock gallery, i forgot what is password and if you want remove or change password you must make HR... Sorry for my bad English [emoji6].
Wysłane z mojego LG-H850 przy użyciu Tapatalka