Redmi Note 9 Pro (Global) Won't boot - Redmi Note 9S / Note 9 Pro (Indian Model) Question

Hi, i just bought this phone last week on Amazon (France) when i received it i immediatly started the process to unlock the device, because i knew that i had to wait for a week (wich i did). Why would i root my phone ? Well because i always install Adaway on my phones, and also because in France it is not legal to record call, so i wanted an idonesian or chinese rom to have that function wich is not included in global roms.
So this evening, i unlocked the device with miflash unlock tool, flashed the twrp that was avalaible (apparently the only one, made for note 9s, but that can work with pro version).
I transfered thoses files to my phone:
miui_JOYEUSEIDGlobal_V11.0.3.0.QJZIDXM_e5c9822122_10.0.zip
miui_JOYEUSEIDGlobal_V11.0.2.0.QJZIDXM_1f0c38d0fc_10.0.zip
miui_CRUX_V12.0.3.0.QFXCNXM_5ece229616_10.0.zip (this one i wasn't sure because it was a chinese rom, and i don't think it was official, but i wanted to try miui12)
And i got an error 7 that said that i have a CURTANAIN device, and can't flash JOYEUSE roms, my bad, i didn't know that, so i downloaded this one : miui_CURTANAINGlobal_V11.0.8.0.QJWINXM_fe48f22bf8_10.0.zip
Of course i started by wiping my data, cache, cache/dalvik, and ended with a factory reset.
I flashed the last rom, and then before reboot the phone, installed Magisk 20.4.
No error, no nothing BUT, after the process, the phone rebooted and shut down instantly.
So i tried to reboot it by pressing Power + Volume Down for a LONG TIME, but nothing, same for Power + Volume Up and Power + Volume Down+ Volume Up. The phone just won't boot
Also when i plug it to my pc, it just bootloop, i can see the Redmi logo for not even 2secs, and shut down immediatly, same if i just charge it..
Amazon will give me a refund if i send it back, they just send me the return process, but i want to try everything i can before that.
Also, if you think that i rather just send it, i will order the same phone again, but still want it rooted, so what can i do to avoid the same problem ?

The only test point solution and an authorized edl account. Or send it to amazon to get it fixed or reimbursed.

Okay, i've rather just send it back to Amazon then.
So, if i order the same device, what should i do to be sure to flash the apropriate twrp and rom ?

Salut ,
Renvoie a Amazon ce sera plus sûre. Je pense qu'une tu lui a injecté une mauvaise rom ce qui l'a brické...
Tu avais quelles spécifications pour ton tel? Car je me pose aussi la question entre Curtana et Joyeuse. Le mien possède un capteur arrière de 64 M pixels en global rom et 4/64 en Ram.
J'attends aussi le délai pour deverouiller mon bootloader.
__________________
Hello, I think youn'd better send it back to amazon because you brick it flashing a bad rom.
What are the specifications of your phone ? I have the same and it is not easy to say if it is a Curtana or a Joyeuse. My phone is a Global version with 64 M pixel camera an 4/64 Ram.
I am also waiting to unlock my bootloader.
Bye
Envoyé de mon Redmi Note 6 Pro en utilisant Tapatalk

ck32 said:
Salut ,
Renvoie a Amazon ce sera plus sûre. Je pense qu'une tu lui a injecté une mauvaise rom ce qui l'a brické...
Tu avais quelles spécifications pour ton tel? Car je me pose aussi la question entre Curtana et Joyeuse. Le mien possède un capteur arrière de 64 M pixels en global rom et 4/64 en Ram.
J'attends aussi le délai pour deverouiller mon bootloader.
__________________
Hello, I think youn'd better send it back to amazon because you brick it flashing a bad rom.
What are the specifications of your phone ? I have the same and it is not easy to say if it is a Curtana or a Joyeuse. My phone is a Global version with 64 M pixel camera an 4/64 Ram.
I am also waiting to unlock my bootloader.
Bye
Envoyé de mon Redmi Note 6 Pro en utilisant Tapatalk
Click to expand...
Click to collapse
Salut, yes c'est ce que j'ai fait du coup, j'ai été remboursé hier, donc je viens tout juste de commander le même modèle. c'est la version Global 64mp et 6gb ram/64gb .
Après honnêtement j'ai pas vraiment fait gaffe pour ce qui est de la version, si c'est une Curtana ou Joyeuse, j'ai juste pris le premier TWRP que j'ai trouvé, et les roms dispos sur le net. Le problème c'est qu'il y a rien qui indique quelle rom est compatible avec quel modèle :/
__________________
Hi, yes that's what i did, i was reimbursed yesterday, so i just ordered the same model. It's the Global version 64mp 6gb ram/64gb .
And honestly, I didn't really pay attention to the version, if it's a Curtana or Joyeuse, I just took the first TWRP i found, and the roms available on the internet. The problem is that there is nothing to indicate which rom is compatible with which model: /

Related

CAMERA (FRONT AND BACK) + Flash does not work

Hello(I'm french, sorry for my bad English),
A friend gave me the Galaxy S2 because it would not start at all (he stayed on Galaxy S2 GT- I9100G) he did not have the recovery or download, I test everything JIG USB and something with OMAP something like that, it did not work in the end I managed to do it again walk the disassembling and the right back and it works, mystery... Anyway this is not the problem.
My problem is that the camera either front or rear and the flash does not work... The photo application app says "camera failed" when I do "*#0*#" and I test the app and back before it does not work. And I tested the flash with an app found on the market for flashlight, not work...
I disassemble again to see if I did not damage anything and everything is good... I do not think it's hardware because the flash, the module before the module and backlog are not connected together, they have a different circuit.
Apparently, it worked when my past (the last photo was taken about 2 weeks), is that it could come from the wipe data/factory reset I am doing what I saw it worked (so just after having disassembled) ?
I tried :
-Wipe data/factory reset from CWM
-Factory-Reset from android settings
-Update of a JB 4.1.2 ICS 4.0.4 (Official/Stock)
I heard about "Galaxy S2 Camera Firmware Update" to update the firmware of the camera app, I try to download an apk because I can not find my happiness on the Samsung Apps, unsuccessfully it live plant launch (the fact of being in JB ? incompatible?). I try "*#34971539#" but I have the right to a "factory test has stopped."
What to do?
PS : my dock flex cable is HS (over USB mode then flash with Odin is dead), it no longer charge with wall charger (which works very well on my S1) but just with the USB cable connected to the computer. I change it soon.
Thank you for your help
Model : GT- i9100G
Android 4.1.2 stock
_____________________________________________________________________
ORIGINAL FRENCH VERSION:
Bonjour,
Un ami m'a passé son Galaxy S2 car il ne demarrait plus du tout (il resté sur Galaxy S2 GT-I9100G) il n'avait plus le recovery ni download, j'ai tout tester, JIG USB et un truc avec OMAP je sais plus trop quoi, sa n'avait pas fonctionné, au final j'ai reussi a le refaire parti en le démontant et remontant juste et voila, mystère... Bref ce n'est pas le probleme
Mon problème est que l'appareil photo que ce soit frontale ou arrière et le flash ne fonctionnent pas... L'application app photo me dit "Echec appareil photo", quand je fais *#0*# et que je test l'app arrière et avant sa ne fonctionne pas non plus. Et j'ai testé le flash avec une appli trouvé sur le market pour faire lampe torche, que dalle
Je l'ai redémonté pour voir si je n'avais rien abîmer et non, tout est niquel... Je ne pense pas que ce soit Hardware car le flash, le module avant et le module arriéré ne sont pas connecté ensemble, ils ont un circuit différent.
Apparemment, il fonctionnait quand on me la passé (la dernière photo date de 2 semaines environ), est ce que cela pourrait venir du wipe data/factory reset que j'ai fais des que j'ai vu qu'il marchait(donc juste apres l'avoir demonté) ?
J'ai essayé :
-Wipe data/factory reset depuis CWM
-Remis usine depuis les parametres android
-Mise a jour de ICS 4.0.4 a JB 4.1.2 (officiel)
J'ai entendu parlé de "Galaxy S2 Camera Firmware Update"pour mettre a jour le firmware de l'app photo, j'ai tester de télécharger une apk car je ne trouve pas mon bonheur sur le Samsung Apps, sans succès elle plante direct au lancement(le fait d'etre sous JB? pas compatible?). J'ai tester "*#34971539#" mais j'ai le droit a un "Factory Test s'est arrêté".
Que faire??
PS: mon dock flex cable est HS(plus de mode USB donc pour flash avec Odin c'est mort), il ne charge plus avec le chargeur secteur(qui fonctionne tres bien sur mon S1) mais juste avec le cable USB branché a l'ordi. Je le changerais bientôt.
Merci de votre aide
Model: GT-i9100G
Android 4.1.2 stock

Can we Flash Twrp via EDL mode without unlocking bootloader ???

i am facing problem for unlocking bootloader, so i just thought IF i could install Twrp via EDL mode ??
is this will work if i replace the TWRP.img file with orignal stock "recovery.img" from the "Fastboot ROM" by extracting the Fastboot ROM of my device, and then flash via Mi Flash tool ?
will the recovery be flashed ???
Yes, it´ll work, just flash nougat miui to prevent other stuffs and reboot inmediately to twrp, flash Magisk, format data and it´s needed anti-bootloop (I´m not sure if it does) through twrp, don´t forget to enable USB debugging and OEM unlock just in case.
SubwayChamp said:
Yes, it´ll work, just flash nougat miui to prevent other stuffs and reboot inmediately to twrp, flash Magisk, format data and it´s needed anti-bootloop (I´m not sure if it does) through twrp, don´t forget to enable USB debugging and OEM unlock just in case.
Click to expand...
Click to collapse
Sorry for bringing this old post back.
I tried to replace the original "recover.img" file with TWRP 3.2.3 and flash the Fastboot ROM. However, when I reboot to TWRP (immediately) it shows "The system has been destroyed". If I boot the phone normally it will setup the Mi-Recovery instead.
Any solution for it?
Nobuemon said:
Sorry for bringing this old post back.
I tried to replace the original "recover.img" file with TWRP 3.2.3 and flash the Fastboot ROM. However, when I reboot to TWRP (immediately) it shows "The system has been destroyed". If I boot the phone normally it will setup the Mi-Recovery instead.
Any solution for it?
Click to expand...
Click to collapse
Are you trying to flash TWRP through EDL mode with locked bootloader? if yes this method actually don´t work cause bootloader in newer versions prevents any change to the system. It worked time ago and I did it in other device like Mi Max but now is not possible.
SubwayChamp said:
Are you trying to flash TWRP through EDL mode with locked bootloader? if yes this method actually don´t work cause bootloader in newer versions prevents any change to the system. It worked time ago and I did it in other device like Mi Max but now is not possible.
Click to expand...
Click to collapse
I see. So is there any other workaround way rather than waiting till my unlock request is approved?
Nobuemon said:
I see. So is there any other workaround way rather than waiting till my unlock request is approved?
Click to expand...
Click to collapse
I didn´t find any method working actually in all the net maybe due to newer policies from Xiaomi that don´t accept any modification to the system and refuses to boot.
I´m waiting my second month, they gave me first 720 hours and after that they extended the time to others 720 hours again.
I found a method and flashed in other older Xiaomi devices to install TWRP or a boot rooted through EDL but actually this doesn´t work (system has been destroyed) so I think that maybe is possible to install a bootloader unlocked or eventually a persist partition of an unlocked device; I suspect that the info is allocated in persist partition and requested in the other thread to some user can backup them and upload to try this method but unfortunately no one wants to help (just a guy with other device RN5), I have other ideas to do it but as stated is a weak community.
mohsiin4u said:
i am facing problem for unlocking bootloader, so i just thought IF i could install Twrp via EDL mode ??
is this will work if i replace the TWRP.img file with orignal stock "recovery.img" from the "Fastboot ROM" by extracting the Fastboot ROM of my device, and then flash via Mi Flash tool ?
will the recovery be flashed ???
Click to expand...
Click to collapse
It will not work either your recovery will be replaced by stick recovery every time you boot or phone just failed to boot into anything at all other than bootloader, the very first requirement for twrp is unlocked bootloader that's there for a reason ?
Finally here is solution for this problem now There Is No Need to apply for permission to unlock bootloader
you may find more information here
https://en.miui.com/thread-2932736-1-1.html
mohsiin4u said:
Finally here is solution for this problem now There Is No Need to apply for permission to unlock bootloader
you may find more information here
https://en.miui.com/thread-2932736-1-1.html
Click to expand...
Click to collapse
This thread is from June, there´s nothing new here; since months ago there´s no need to apply to unlock, unlock is done automatically without requesting any reason but after...........720 hours and some users has to wait after that others 720 hours.
Hello.
So only way to unlock bootloader is to wait XXX hours, right? I still need to wait 1 month before unlock.
And after you execute MiUnlock is unlock forever event if you change ROMS?
Thanks in advance.
dark_vader said:
Hello.
So only way to unlock bootloader is to wait XXX hours, right? I still need to wait 1 month before unlock.
And after you execute MiUnlock is unlock forever event if you change ROMS?
Thanks in advance.
Click to expand...
Click to collapse
By now the only way is waiting the time that Xiaomi whims, also ended the time it could be extended without any apparently reason.
Users don´t mention a firmware that can relock devices like happened time ago in other devices, just be careful that if you use MiFlash Tool the option "Flash_all_and_relock" is unchecked.
SubwayChamp said:
...Users don´t mention a firmware that can relock devices like happened time ago in other devices, just be careful that if you use MiFlash Tool the option "Flash_all_and_relock" is unchecked.
Click to expand...
Click to collapse
Better still, just delete "flash_all_lock.bat" and "flash_all_lock.sh" forever. This would ensure that, if you ever forget to uncheck the mentioned box, the flash tool will still never be able to find the script that it needs to do the dastardly deed.
DarthJabba9 said:
Better still, just delete "flash_all_lock.bat" and "flash_all_lock.sh" forever. This would ensure that, if you ever forget to uncheck the mentioned box, the flash tool will still never be able to find the script that it needs to do the dastardly deed.
Click to expand...
Click to collapse
Thx, yes, it´s a way to do it, "fastboot oem lock" it´s at the end of "flash_all_lock.bat" file; in my case I´m very careful when flash some device but for distracted users could work, dificult here will be that if they don´t pay attention flashing less would take precautions before.
SubwayChamp said:
Thx, yes, it´s a way to do it, "fastboot oem lock" it´s at the end of "flash_all_lock.bat" file; in my case I´m very careful when flash some device but for distracted users could work, dificult here will be that if they don´t pay attention flashing less would take precautions before.
Click to expand...
Click to collapse
Absolutely correct! Nothing beats always paying full attention when about to flash anything. But we all know that this often doesn't happen
SubwayChamp said:
This thread is from June, there´s nothing new here; since months ago there´s no need to apply to unlock, unlock is done automatically without requesting any reason but after...........720 hours and some users has to wait after that others 720 hours.
Click to expand...
Click to collapse
same here..
i got same error like wait for 720 hours...
any solution ???
dark_vader said:
Hello.
So only way to unlock bootloader is to wait XXX hours, right? I still need to wait 1 month before unlock.
And after you execute MiUnlock is unlock forever event if you change ROMS?
Thanks in advance.
Click to expand...
Click to collapse
yes u need not to unlock again once u unlock the device
Hello, I know this is irrelevant post but may be u can help me. I have a xiaomi mi5 device. I buy this phone from offline market as second hand used phone.
--- --- --- --- ---
Because of i'm new to xiaomi device so i am unaware of mi account issues so after buy this devuce wants to unlock bootloader but using mi unlock tool it cause error like "Your device is locked with 197****85 and can't be unlock".after searching on net i come to know this device's IMEI associated with other person phone number mi account which is a great problem i dont know who is he. in recovery account mi.com only show his number like +9230******67. i don't know how to reach the owner number. Without reaching to owner seems impossible to unlock. any solution from any senior/junior developer or member.
bot88 said:
Cela ne fonctionnera pas non plus, votre récupération sera remplacée par une récupération par clé à chaque fois que vous démarrez ou que le téléphone ne parvient pas à démarrer sur autre chose que le chargeur de démarrage, la toute première exigence pour twrp est le chargeur de démarrage déverrouillé qui est là pour une raison ?
Click to expand...
Click to collapse
Bonjour j'espère que je ne suis pas là trop tard ce thread date de 2018 enfin voici mon problème je vous demanderai d'utiliser en traducteur pour mon message car traduire le message sur Google traduction le rend incompréhensible . Enfin pour venir à mon problème j'ai un bootloader déverrouillé est j'ai flashé twrp problème j'ai flashé une mauvaise rom est des lors que j'ai fait un reboot recovery l'écran devient noir cl incompréhensible de plus quand j'essaye de démarré mon téléphone en recovery ou fastboot je ne vois rien l'écran est toujours noir je me demande même si le téléphone fonctionne correctement en recovery et un fastboot dès lors que je démarre dans les deux mode mon téléphone est sensé vibré comme quoi il démarre belle est bien mais rien je vois le port Qualcomm 9008 (10) activé je me doute donc que je viens de le brick je suppose qu'il est un mode EDL auriez vous une solution je suis bloqué ?
Miui 13 said:
Bonjour j'espère que je ne suis pas là trop tard ce thread date de 2018 enfin voici mon problème je vous demanderai d'utiliser en traducteur pour mon message car traduire le message sur Google traduction le rend incompréhensible . Enfin pour venir à mon problème j'ai un bootloader déverrouillé est j'ai flashé twrp problème j'ai flashé une mauvaise rom est des lors que j'ai fait un reboot recovery l'écran devient noir cl incompréhensible de plus quand j'essaye de démarré mon téléphone en recovery ou fastboot je ne vois rien l'écran est toujours noir je me demande même si le téléphone fonctionne correctement en recovery et un fastboot dès lors que je démarre dans les deux mode mon téléphone est sensé vibré comme quoi il démarre belle est bien mais rien je vois le port Qualcomm 9008 (10) activé je me doute donc que je viens de le brick je suppose qu'il est un mode EDL auriez vous une solution je suis bloqué ?
Click to expand...
Click to collapse
English is required here. Google Translate (and I think the others too) works very fine, and your message is very comprehensible.
If you managed to enter to EDL mode then you should flash the stock ROM using Mi Flash tool, use the option that in the bottom to do a Clean flash, no need to re-lock bootloader in case you don't want it.
SubwayChamp said:
L'anglais est requis ici. Google Translate (et je pense que les autres aussi) fonctionne très bien, et votre message est très compréhensible.
Si vous avez réussi à passer en mode EDL, vous devez flasher la ROM d'origine à l'aide de l'outil Mi Flash, utilisez l'option en bas pour faire un flash propre, pas besoin de verrouiller à nouveau le chargeur de démarrage au cas où vous ne le voudriez pas.
Click to expand...
Click to collapse
in reality I do not know if I am in edl maiq mode each time I try to start in fastboot or in recovery the screen remains black when I go to my task manager I see: Qualcomm HS-USB QDLoader 9008 (COM10) escque cella means that it is an edl mode because it would not be able to start normally? if so how do you think that I can succeed in unlocking it

Ulefone Power 5 phone rooted.

Ulefone Power 5 phone rooted.
Hello everyone.
I have a somewhat new Ulefone Power 5 phone that I had bought only a few weeks ago, though old, it is new to me. I had got around to rooting the thing, TWRP as well. IF anyone is interested in how to fix theirs (Only Ulefone Power 5) then I will show you how, step by step, with all the software tools that you will need.
Post me back on here and I will show you how. And NO this is not a scam.
Peconet57 said:
Téléphone Ulefone Power 5 rooté.
Bonjour à tous.
J'ai un téléphone Ulefone Power 5 quelque peu neuf que j'avais acheté il y a seulement quelques semaines, bien que vieux, il est nouveau pour moi. J'avais commencé à enraciner la chose, TWRP également. SI quelqu'un est intéressé par la façon de réparer le leur (uniquement Ulefone Power 5), je vous montrerai comment, étape par étape, avec tous les outils logiciels dont vous aurez besoin.
Postez-moi ici et je vous montrerai comment. Et NON ce n'est pas une arnaque.
Click to expand...
Click to collapse
merci je veux bien savoir comment rooter ulfone power 5
svp

Root note 9 sm-g960w

Jai essayer de rooter mon note 9 avec odin mais lors que je redemarre le telephone il ny a pas android qui embarque il reste blocquer sur le logo de samsung!! Quelqu'un peut m'aider?
Translation: I tried to root my note 9 with odin but when I restart the phone there is no android on board it remains blocked on the logo of samsung !! Someone can help me?

Question one plus nord 2 no boot

hello sorry for my english I'm french, infact I tried to restore oos after rooting oos 12 which gave me a brick except that after flashing oos 11a.20 with mtk client my phone does not start even boot logo nothing i don't know what to do
bonjour désolé pour mon anglais je suis français, en fait j'ai essayé de restaurer oos après avoir rooté oos 12 ce qui m'a donné une brique sauf qu'après avoir flashé oos 11a.20 avec le client mtk mon téléphone ne démarre même pas logo boot rien je ne sais pas Que faire
Did you flash your A20 preloader backup as well? If not, then that's likely the cause of the problem you're facing.
Also the phone needs to be restarted for it to get out of that pesky Brom mode.
( Vol up + power for at least 30 seconds ).

Categories

Resources