Hello all,
So they switched the name of app and now since the new update to Zepp my Amazfit bip is crap the battery only last maybe 1 day ... Before at least a week or better with the bpm and sleep options on . Anybody else having same issues or did the batt in my watch just fail ? I did what the amazfit site said fully charged left alone over night , no bluetooth just sitting on my desktop and it lost 26% over night ....Thanks for any help
Just found this out. Does anyone know of a version of Zepp or an older version of Amazfit software that will work with the Fire HD tablet 10 inch? TIA
Related
Hi everyone! How Amazfit PACE detect that I'm sleeping?
I have passed 3 nights and the gadget did not tracked my sleep. The message: " No sleep detect".
English firmware v 1.3.3a
Anybody may help me?
Thank you in advance.
Can confirm this. It's not detecting 'afternoon nap', or when I sleep for 6 hours at night, it detects 4 hours or something. Very, very lousy sleep detection.
I've had Alcatel Watch Go before this, it detected sleep to a minute.
Sent from my LG-D858HK using Tapatalk
babaroga73 said:
Can confirm this. It's not detecting 'afternoon nap', or when I sleep for 6 hours at night, it detects 4 hours or something. Very, very lousy sleep detection.
I've had Alcatel Watch Go before this, it detected sleep to a minute.
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
it's like mi band , it only "detect" sleep during a period of night
so if you go to sleep at , for example , 6 , probably it will not measure it as sleep , but i had never problem with the second problem (even with mi band / 2)
It's not helping but detects my sleep perfectly.
Sent from my XT1635-02 using Tapatalk
kodorevi8ulis said:
it's like mi band , it only "detect" sleep during a period of night
Click to expand...
Click to collapse
What is this period? So I could adjust myself, if cannot do that to a watch.
Sent from my LG-D858HK using Tapatalk
I detected a big issue in Amazfit PACE (English v 1.3.3a). It can not detect sleeping at all 24 hours off the day.
I explain: I work at night and I go to bed at 07:00AM, sleeping until 03:00PM. I did a test: I changed AM to PM in the connected smartphone and ..."voila".. Amazfit PACE mesured my sleeping.
I concluded that there are a no mesured time window.
Anybody can report this issue to XDA for correct it in the PACEfied ROM?
I consider change the English ROM version (1.3.3a) to PACEfied ROM.
Ronaldo L. Genaro
Agree about night shifts should be supported, but it is known that Huami doesnt support "sleep over a day".
babaroga73 said:
What is this period? So I could adjust myself, if cannot do that to a watch.
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
don't know and of course you can't change it i guess if you try to sleep after 6-7am it doesn't measure the sleep
Fibra Man said:
I detected a big issue in Amazfit PACE (English v 1.3.3a). It can not detect sleeping at all 24 hours off the day.
I explain: I work at night and I go to bed at 07:00AM, sleeping until 03:00PM. I did a test: I changed AM to PM in the connected smartphone and ..."voila".. Amazfit PACE mesured my sleeping.
I concluded that there are a no mesured time window.
Anybody can report this issue to XDA for correct it in the PACEfied ROM?
I consider change the English ROM version (1.3.3a) to PACEfied ROM.
Ronaldo L. Genaro
Click to expand...
Click to collapse
1)So you said that the watch actually detect sleep (after the change) so what is the "It can not detect sleeping at all 24 hours off the day."?
2)The problem here is the 7am , it's morning , this is why it didn't measure anything , so how did you actually "concluded that there are a no mesured time window. " ??
Let's hope that the dev of notify &fitness adds support for pace (it has for arc and bip, and he said that he is trying to add pace).
Thanks. Guess I'll have to live healthier[emoji6]
I turned on Heart Rate measurement to always on, I'll see if it has any impact.
But... This is just sad, very sad.
Sent from my LG-D858HK using Tapatalk
babaroga73 said:
Thanks. Guess I'll have to live healthier[emoji6]
I turned on Heart Rate measurement to always on, I'll see if it has any impact.
But... This is just sad, very sad.
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
i don't think that it matters
i guess it's just software "error" (not an error actually)
it has the data but the software says "do not translate them as sleep"
with mi fit app you had the option to edit the sleep zone , the problem is that the amazfit app is too "basic"
we must wait at least for an integration (amazfit watch - mi fit)
I've had three functions on my Alcatel Watch Go, that I'm sorely missing now:
1.Vibrating when bluetooth disconects as "Don't forget your phone" (it saved me from loosing phone twice)
2. Ability to remote control media player on phone (since I don't have bt earbuds still)
3.Stonger vibration for alarm and precise sleep measurement.
But the pros outweight the cons on Amazfit, still.
Sent from my LG-G3 using Tapatalk
PLease, focus: "Amazfit PACE - not tracking my sleep ( " No sleep detect")"
Thank you in advance.
kodorevi8ulis said:
don't know and of course you can't change it i guess if you try to sleep after 6-7am it doesn't measure the sleep
1)So you said that the watch actually detect sleep (after the change) so what is the "It can not detect sleeping at all 24 hours off the day."?
2)The problem here is the 7am , it's morning , this is why it didn't measure anything , so how did you actually "concluded that there are a no mesured time window. " ??
Let's hope that the dev of notify &fitness adds support for pace (it has for arc and bip, and he said that he is trying to add pace).
Click to expand...
Click to collapse
1 & 2 ) I think there must exist a time slot of sleep measurement,
What would this interval be? Would it be possible to include a function that allows the user to choose this interval?
Thanks. Regards.
kodorevi8ulis said:
don't know and of course you can't change it i guess if you try to sleep after 6-7am it doesn't measure the sleep
1)So you said that the watch actually detect sleep (after the change) so what is the "It can not detect sleeping at all 24 hours off the day."?
2)The problem here is the 7am , it's morning , this is why it didn't measure anything , so how did you actually "concluded that there are a no mesured time window. " ??
Let's hope that the dev of notify &fitness adds support for pace (it has for arc and bip, and he said that he is trying to add pace).
Click to expand...
Click to collapse
1 & 2 ) I think there must exist a time slot of sleep measurement. What would this interval be?
In PACEfield ROM:
1) Would it be possible to include a function that allows the user to choose the sleep interval that works for him?
2) Or allow the measurement to occur full time?
Thanks. Regards.
Same problem for me. I sleepafter 6am, so no sleepdta. How to report to huami? We buy it by money, not as gift. They must orrect it or should have told before buy
tanna_ccna said:
Same problem for me. I sleepafter 6am, so no sleepdta. How to report to huami? We buy it by money, not as gift. They must orrect it or should have told before buy
Click to expand...
Click to collapse
I will appreciate any help, because nobody could help us. I think it's because most of them sleep during standard hours.
Best regards.
AMAZFIT watch no 24 hours sleep monitoring it only monitor sleep timing from 12-7AM
Hi, is there a solution or patch about this issue? so that sleep mode be monitored 24 hours not just for a specific period of time from 12AM to 7AM.
Same for me .... 1.3.6d not getting when I sleep out of the expected hour .... I hope that it's correcting in the next version ... even if we configure the manual time when we fell to sleep in a different time.
Yes, I hope also, If It´s not possible to detect a nap or the correct sleep time at least make it configurable.
What settings does it require to operate? Does it need the continuous heart rate ?
Hello,
in Germany, last night clocks were adjusted at 3:00am to 2:00am due to dayliht saving. My Android phone switched the time instantly, my Amazfit BIP ignored it, even at 11 am, the time was still faulty, syncing with the Mi Fit app didn't help. The only thing that helped was to unbind and rebind the BIP to the phone
This is really a pitty, I wonder how often at all the BIP does syncronize at all, and why the people developing this piece of software are so ignorant not to implement the most obvious use-cases.
Any tips and hints how the time sync behaviour can be improved? Thanks!
Turn off and then on the Bluetooth. That's all. Works every time. I travel a lot and that's what I do to sync the time when I change timezones.
Sent from my Huawei P9 using Tapatalk Pro
A lot Xiaomi/Amazfit Products (Miband, Bip, Cor etc) has to connect one time to mifit after time change to get the right time again! I use mifit since a few years now and i‘ve never a problem with the time change!
I tried reconnecting bluetooth as well as syncing in the MiFit App, both did not help. Only unpairing and repairing solved the issue Even if these two did work, it is a shame that things like that do not work automatically out of the box...
Hello, i have same issue. Just turn off and on your bip and it solve the problem.
Restart the phone
I had same issue today and restarting the phone connected to my BIP solved the issue instantly. Hope it helps!!
4 years later and my brand new Amazfit Band 7 ignores daylight saving even after a full shutdown. Disappointing indeed because (almost) all my devices, clocks, watches use either DCF or NTP to avoid this issue in the first place.
Good evening to you all,
I´m facing an issue with my watch (or app i don´t know).
When i measure HR in manual mode, the value is not sincronized with the app (version 3.6.2), but when is set in continuous mode/ or doing sports everithing works fine. This has started after the watch came from support. the HR protector got sepparated from watch.
PS: If i downgrade the app to version 2.7.0 everything gets back to work...
Rom version: 2.3.11.1
Thanks in advance
Got dame issue with stratos 3. App Sync pb i think
The Zepp app is very poor at tracking deep sleep. Anyone with the same problem?
Notify & Fitness for GTS is tracking fine.
Two months ago,it tracked sleep normally, but now it doesn't.
Any help? I also reinstalled
See attached images
Yes, I also have the same problem with deep sleep tracking! I made a complete reset of the GTS but it doesn't work. The problem is still the same! I also noticed that since the Zepp update the heart rate is not so accurate as normal and also PAI isn't working. Very disappointing, the GTS was great but now I am thinking to switch to another brand.
Hi Guys
I have an Amazfit GTS 3 and use it with the Zepp App on a Galaxy S10. I have the problem that the Zepp App suddenly drains my Battery in the Background while I don't use any specific feature on the Watch. I use the watch for showing me Notifications but I have set it to just let some Notifications through that I want. I have reinstalled the Zepp App but nothing changed. Does anyone know this problem and how to solve it.
Thanks
I had this issue with my GTS 3 and Samsung Galaxy S8. Just unpair my watch and waited for 1 month. Latest FW fix this issue. I recommend you to update Zepp app and watch firmware to latest version.
I will do that. Thanks a lot.
Same problem here with the latest Zepp app v7.2.9 on a Google Pixel 6a phone, watch firmware is up to date. It's the app that uses the most battery and does not let the phone go to sleep, there's a wakelock from the Zepp app that keeps the phone awake for hours.
I contacted Amazfit support but they are not helpful at all. Disappointing because the watches are decent, the watch battery life is really good, but the software on the watch and phone is full of bugs, some I can live with, but things like battery drain I will not tolerate.
Intrestingly, my problem resolved itself after some days. Maybe it is because I put the app into the Standby for not frequently used Apps in the Samsung Battery settings. I still get all the push notifications to my watch. I don't know if the Google Pixel Phones have such a Feature or if my problem got resolved in another mysterious way, but maybe it could solve your problem aswell, if you put the app into Standby.
I have the Zepp app battery usage set to Restricted and it still doesn't help. But you are correct notifications still come. Anyway, we should not have to set it to Restricted, this is clearly a bug in the Zepp app.
Having the same exact issue starting just a couple of days ago. Tried uninstalling the Zepp app, removing Bluetooth connection on phone, put the Zepp on Sleep or even hard stop, but nothing seems to work.
What I just did was to remove the watch from Zepp app and leave the app alone on the phone and see if somehow the connection between Zepp and watch is causing the battery drain on the phone.
BTW: I just upgraded the latest firmware on the watch and the Zepp app was just installed from PlayStore.
Hope someone knows how to fix this annoying issue. I like the watch a lot, but leaving the app draining the battery is not an option for me.
I fixed it by returning the watch. Nice hardware but garbage software and I don't tolerate battery drain. I reported it to them in Oct, nothing changed in 3 months, clear sign to move on rather than hope for a fix.
Ninja914 said:
Having the same exact issue starting just a couple of days ago. Tried uninstalling the Zepp app, removing Bluetooth connection on phone, put the Zepp on Sleep or even hard stop, but nothing seems to work.
What I just did was to remove the watch from Zepp app and leave the app alone on the phone and see if somehow the connection between Zepp and watch is causing the battery drain on the phone.
BTW: I just upgraded the latest firmware on the watch and the Zepp app was just installed from PlayStore.
Hope someone knows how to fix this annoying issue. I like the watch a lot, but leaving the app draining the battery is not an option for me.
Click to expand...
Click to collapse
Hello, I have the same problem with the GTS 4 mini.
Has removing the watch from the Zepp app had any effect?
Have you found out anything?
Have you tried installing an older version of the app?
Thank you.
As I already wrote above my problem seemed to misteriuosly resolve itself. I don't really know why and how. I just put the app into the list of standby apps and I still receive all the notifications. However the Bluetooth Connection to the watch draws quite a bit of power. It's quite weird. Some days my phone has good deep-sleep percentages and the other day it drains the battery quite a bit while just beeing in my pocket. I think the WIFI and cellular Connection at where I study has an impact on it. I could write a full thread about my battery life in the everyday life vs at the weekend but thats not the main Topic here. All in all my problem with the Zepp app seemed to have resolved itself but my battery life is still inconsistent. When I look at the wakelocks from the Zepp App a lot of them are caused by updating the weather, so maybe you can try disabling the weather functionality of your watch if you dont regularly use it. And I also recommend to put Zepp into Standby. If that resolves your problem i'm happy and if it doesn't, you can always put the settings back that I recommended.
I hope that I could help you and that your problem got solved.
Have a great day
Fast_Lessy
Thank you.
I have found that if I disable the Alexa connection the issue is completely resolved. This is of course very annoying, because then I can no longer use Alexa.