Hi everyone,
After a few hiccups, I successfully rooted my Leagoo T5c, thanks to the excellent tutorial posted here. The phone works fine, thank you, but now, I'd like to know how to proceed to, say, upgrade the phone from its current Android version (7.0) to a more recent version.
Where to start?
Since this phone has a Spreadtrum/Unisoc SC9853i SoC (Intel-based), I suppose the custom ROMs and upgrade possibilities are few and far between, but I'd like to give it a shot.
I'm open to ideas, tips, tricks, voodoo moves and Santeria incantations, but I'm still a noob when it comes to Android, so please, be patient, and methodical... :good:
@UglyStuff
If you can unlock phone's boot-loader then you should be able to flash any Custom Recovery and/or Custom ROM that's suitable to 100% to phone's CPU-architecture. Who is the supplier of phone's SoC isn't of any interest at all.
Hi,
Thing is, as I said, I'm a noob when it comes to Android, so I don't want to brick my phone by trying to make it ingest a ROM that's not suitable for it.
If my phone came with a MediaTek or Qualcomm SoC, I wouldn't worry, because there are plenty of ROMs out there, custom or not, to play with, but this Spreadtrum/Unisoc SoC is a thing of its own.
It's based on Intel's Airmont architecture, and few phones or tablets use it, at least this specific version (SC9853i). Maybe I just don't understand too well how a ROM is built.
UglyStuff said:
Hi,
Thing is, as I said, I'm a noob when it comes to Android, so I don't want to brick my phone by trying to make it ingest a ROM that's not suitable for it.
If my phone came with a MediaTek or Qualcomm SoC, I wouldn't worry, because there are plenty of ROMs out there, custom or not, to play with, but this Spreadtrum/Unisoc SoC is a thing of its own.
It's based on Intel's Airmont architecture, and few phones or tablets use it, at least this specific version (SC9853i). Maybe I just don't understand too well how a ROM is built.
Click to expand...
Click to collapse
For example, I found this article where they explain how to flash LineageOS 17 (based on Android 10) on a Panasonic Eluga Ray 800 that uses the same SoC as my Leagoo T5c.
The thing is, I don't know if this is transposable to my device, though the two share the same SoC. As I said earlier, I don't want to permanently brick my phone...
@UglyStuff
The mentioned Intel Airmount SoC's instruction set architecture is x86_64 , the also mentioned Intel Spreadtrum SC9853i SoC's instruction set architecture is x86_64, too. Hence in order to upgrade yor phone's Android you need a Custom ROM compiled for x86_64 architecture. GIYF ...
OK, but since this Panasonic and my Leagoo share the same SoC, they also share the same x64 instruction set, so do I get it right if I say that the custom ROM built for the Panasonic would fit on my Leagoo, or am I missing something?
In theory it should.
OK, I guess I'll have to chance it, and use recovery in case things so south. My phone isn't compatible with Treble, according to this app. Does it mean anything in terms of installing one of the generic system images found here or not?
Related
Hello, I am not-exactly-proud owner of PAP5400DUO, it has only 512 MB RAM and Quad-core CPU, so it is sometimes unresponsive and since there is no hope of it getting an update to KitKat. I searched for a custom roms, but I haven't found any (which is little troubling), yet the device can be rooted and MIUI recovery flashed (version unknown, I didn't root my phone yet). On my way when searching what do I need to build AOSP ROM I found out that I need a "device tree" which if I understood right is some specific information about my device (drivers etc) needed to compile a rom properly.
Which is quite an obstacle, because it is nowhere to be found, yet I stumbled upon a post that said that device tree can be created from scratch (yet probably by trial-error method).
All I need is to know if it is really worthy the time and struggle, I used to own HTC Wildfire S and have limited knowledge about ROMs, yet I am willing to study by myself, there are the main questions:
Is it everything possible?
Is the said recovery sufficient to flash KK? (hard to tell, i don't know the version, I know)
Would AOSP KK ROM improve the performance? (I hope so, but still its 512 MB RAM only)
Is it worth it? isn't there another way? (the kernel doesn't support SWAP, so maybe kernel update?)
As far as I know, flashing a ROM cannot brick the device (unless it harasses with Radio, which I really don't intend), so I can Always revert to backup and phone stays functional right?
I’ll start by admiting that, in the arts of cooking/building/porting android innards, I’m closer to being a complete noob than na intermediate user.
I own a Newman K1S, JB 4.2.2, MT6592, 2Gb/16Gb, 720p, and, sadly for me, it looks like the manufacturer (Newman Mobile, or Newsmy, who knows) pretty much disavows any knowledge of this model ever being built or sold. No reference to it, no community, no android updates or ROM releases.
Taking into account some MediaTek source codes for KitKat were made available earlier this year (even if unofficially), I was wondering:
So, question number 1 – Is it possible to build android 4.4 for my device straight from said sources? Or are they unreliable and it would be best not to attempt it?
And question number 2 – Being at the noob level, should I stay away from such a task? And, in this case, would I be better off porting a 4.4 ROM from a similar spec’ed device?
Also, while browsing needrom, I noticed that a 4.4 “official” ROM was posted for my device. However, having flashed it, I found that it produces no sounds from the external speaker (although with headphones it works fine). Same thing was experienced by other users, and there is no fix so far.
Which takes me to question number 3 – What may I try, in order to fix an issue like this? Does KK use the same sound drivers as JB, and maybe it’s only a matter of replacing them? (if so, I believe this is within my grasp, even if I must unpack the IMG files to reach the drivers)
Lastly, Newman K1S has a severe overheating problem when pushed, which I believe would be easily solved by underclocking it to 1.3 or 1.5, or maybe implementing an optimized kernel.
Final question – How do I manage to underclock with my current kernel, or, better yet, how do I port a custom, optimized kernel to my device?
Congratulations to everyone who managed to read this far, and thank you in advance for any help provided. I’ve spent the last few days reading tutorials and guides, only to become even more confused… I did manage to get android kitchen running on my Windows laptop, though!
Links to recent/updated guides that might be useful are appreciated, too.
Hi,
CPU of my android device is MT6592 (8xARM Cortex –[email protected] MHz) with instruction set 32-bit ARMv7. Board and product is ht1_107a_iball_mjk. Apart from this, Codename is REL, Internal Memory is 16GB and RAM is 2GB. And I searched many times on https://download.cyanogenmod.org/ for compatible CM 13 but I didn’t find.
If no CM 13 is exists for my device, it’s unacceptable for me. Like system requirements for Windows 7, Windows 8.1, Windows 10, etc, I would like to know the hardware requirements for android 6 and android 7.
Also I noticed, all builds on https://download.cyanogenmod.org/ are for Snapdragon Processors only. Is it right?
Please let me know about the compatible CM 13 from https://download.cyanogenmod.org/.
Regards
GNS
u forgot the most important part xD , what's ur device model ?
Modal Number is iBall Brace-X1. It really more unfortunate for me that there is no release from my device manufacturer related to boot-loader, Custom Recovery, Custom ROM or anything related to this. Also I do not find any helpful developer release for my device. As I do not get helpful tools, release, Custom Recovery and Official Custom ROM for my device, however I am ready to try for unlocking boot-loader, flashing Custom Recovery and Custom ROM multiple times but while doing all these procedures sometimes I get scared of any faults in terms of hardware.
Hi, I'm in need of some advice about Android development/device to purchase,
Since the devs here are far more experienced than me I would ask some advice,
I started recently 'making' my own AOSP but I needed slow down after discovering I need to have the binaries(kind of: the drivers of the hardware?). So I spent my last 2 days searching about it and devices I could use
I came to the following understanding, I need the AOSP + kernel(as long as I have the kernel I don't need worry about the binaries from the vendor ? since the kernel takes care of it)
I'm thinking between a Moto C Plus or Xiaomi Redmi 6A, since I discovered there are currently ROM's and both have their TWRP. On the case of Xiaomi even the kernel is available. I also noticed the Xperia are good for development, but my problem is the budget I have available
Any piece of advice is welcome, thanks :good:
Try this
biscottoesse said:
Hi, I'm in need of some advice about Android development/device to purchase,
Since the devs here are far more experienced than me I would ask some advice,
I started recently 'making' my own AOSP but I needed slow down after discovering I need to have the binaries(kind of: the drivers of the hardware?). So I spent my last 2 days searching about it and devices I could use
I came to the following understanding, I need the AOSP + kernel(as long as I have the kernel I don't need worry about the binaries from the vendor ? since the kernel takes care of it)
I'm thinking between a Moto C Plus or Xiaomi Redmi 6A, since I discovered there are currently ROM's and both have their TWRP. On the case of Xiaomi even the kernel is available. I also noticed the Xperia are good for development, but my problem is the budget I have available
Any piece of advice is welcome, thanks :good:
Click to expand...
Click to collapse
Hi there,
The best phone that I recommend is the Moto phones as they are easier to port custom versions of android. However, since the Moto C Plus has a MediaTek Processor, I suggest you look for other versions of the Moto Series phones that has a Snapdragon Processors. For example like the Moto E 2nd Gen LTE version, though it has a 1gb ram, I've seen many developers developing their own custom ROM.
I played around with MediaTek Processors the one thing I really don't love about them is that they are not robust like other processors. I had a Lenovo S820 with a MediaTek processor, the one thing I find annoying is that the MediaTek Processors use SPFLASH Tool.
But hey it's your choice like, just make sure the phone that you choose is able to port your custom ROM easily and won't brick the device.
Thank You
KIBS2173
!!!!!!!!!!!! I AM NOT RESPONSIBLE IF YOUR DEVICE GOT BRICKED OR DAMAGED !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
KIBS2173 said:
Hi there,
The best phone that I recommend is the Moto phones as they are easier to port custom versions of android. However, since the Moto C Plus has a MediaTek Processor, I suggest you look for other versions of the Moto Series phones that has a Snapdragon Processors. For example like the Moto E 2nd Gen LTE version, though it has a 1gb ram, I've seen many developers developing their own custom ROM.
I played around with MediaTek Processors the one thing I really don't love about them is that they are not robust like other processors. I had a Lenovo S820 with a MediaTek processor, the one thing I find annoying is that the MediaTek Processors use SPFLASH Tool.
But hey it's your choice like, just make sure the phone that you choose is able to port your custom ROM easily and won't brick the device.
Thank You
KIBS2173
!!!!!!!!!!!! I AM NOT RESPONSIBLE IF YOUR DEVICE GOT BRICKED OR DAMAGED !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
thanks for your share :good:
I can already guess the answer, but I still have to ask to be certain.
I have an A7 (2016) and I really need to port Android 9.0 Pie to it. I need a proper mostly stock rom. (basically a manufacturer rom) I haven't been able to find a phone that uses the same chipset (I doubt it exists)
Below two phones do not have the same chipset, but I am hoping they are similar enough for it to work:
https://www.phonemore.com/specs/samsung/galaxy-a7-2016/sm-a710f/
https://www.phonemore.com/specs/samsung/galaxy-j7-core/sm-j701fds/
My question is, would it be possible to port from a different chipset if they are similar enough? Is there a way?
Thank you all.