Note:- English is not my first launguage.
I successfully solved this issue on Galaxy J2.
So here is my story.
I installed a custom rom on my phone. Everything was working fine including twrp recovery.
My Frp lock was off. One day i updated google play services and added my google account on phone to use play store
till then everything was working great. After someday's i reset my phone using settings and forgot to remove google account.
as i added google account my frp lock was enable automatically. Once my j2 restart i was got a msg "custom binary blocked by frp lock" and my phone switch off.
after that i am not able to boot my phone. I am only able to use Download mode. :crying:
after searching 2-3 days on internet i able to find only 1 solution i have to install stock rom which i don't want to.
So i try to flash twrp recovery.img using odin but when flashing is started my phone showing an error like "not able to flash frp lock is on".
after some unsuccessful attempt finally i founded one solution.
I downloaded recovery.img and boot.img from firmware.mobi
then i flash it using heimdall-frontend because i am using linux.
you can also use odin if you are using windows.
So when i flash the both files my phone started and am able to use it.
but my phone is unrooted so again i put my phone on download mode then push twrp recovery.img as a bootloader.
now i able happly using my phone without any problem
METRO.... Muchas Felicitaciones y Gracias por tu Historia, igualmente tengo un J2 Bloqueado, asi que lo intentare como lo hiciste tu. Saludos.
Me resulto el Flashear con los archivos descargados boot.img y recovery.img desde la pagina web https://desktop.firmware.mobi/.
Luego debia comprimir los archivos correspondientes en formato *.tar con cualquier aplicacion (ej. 7.zip).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
y usar posteriormente la aplicacion ODIN para flashear.
Y listo. Gracias por la Guia.
Related
ROM P708g V20a_26-APR+Root CUSTOM BY danielito83
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS NOT MY ROOM ALL CREDITS TO danielito83 on HTCMania :highfive:
Tested on P708G "Mexico"
This room is much more fluid than the stock
Gods:
Last official LG firmware (V20a_26-Apr)
Root
LG optimus lockscreen G
Original icons, bitmaps goodbye to T3lc3l
Original Climate Widget
LG BootScreen and unbootscreen
Goodbye T3lc3l applications
Reqs:
V20A T3lc3l *not tested on another carrier*
Download KDZ "offiline mode" HERE
Download the firmware "KDZ FILE" from here
Download the DZ
Installation:
View attachment Instructions.docx
Before step 7 copy to clipboard the "DZ File"
Start the utility by pressing ok
Then go to "C:\ProgramData\LGMOBILEAX\" and refresh till a "Flash" folder appears. then enter and wait for it to display a DZ and a dll file. when the DZ is no longer on 0Kb replace the DZ file with the clipboard file (have to be fast and responsive)
Wait till it finishes
When flashing ends, disconnect the phone; close the LG update tool and the R&D Test Tool utility.
*You do this on your own risk! Good Luck...
*You need to have V20A installed to flash this one
*You need all lg drivers up to date
*Dont unplug phone when flashing wait till complete. or till any errors appears.
*Finally the camera works!
Remember this is not my room happy flashing! puedes pedir ayuda en español
Some benchmarks:
p708g
do I need an account to download the firmware?
There is no more support for this rom
Enviado desde mi iPhone con Tapatalk
hola yo ya tengo p708g con jb 4.1.2 lo k solamente quiero es hacerle root esto como se hace? otra cosa no puedo descargar el archivo offline de skype dice tiene virus
santana3 said:
There is no more support for this rom
Enviado desde mi iPhone con Tapatalk
Click to expand...
Click to collapse
Any other ROM that works on the P708g with camera support?
detesto said:
Any other ROM that works on the P708g with camera support?
Click to expand...
Click to collapse
All CM10 ROMS with gandalf kernel for p708
Enviado desde mi iPhone con Tapatalk 2
lokovox said:
hola yo ya tengo p708g con jb 4.1.2 lo k solamente quiero es hacerle root esto como se hace? otra cosa no puedo descargar el archivo offline de skype dice tiene virus
Click to expand...
Click to collapse
Skydrive lo detecta como virus pero no tienes nada de que preocuparte
Enviado desde mi iPhone con Tapatalk 2
Is there a way to Sim Unlock this?
So I bought this phone two days ago and i was trying to root it so i downloaded a programme called "SRS root"
and it didn't want to root the phone so i clicked in "ADB Toolbox" and then "Robot Recovery" thinking that this will enter the recovery mode like TWRP or CMW but it didn't and this showed up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
now every-time i reboot the phone i see LG logo then LG boot animation then this screen
my phone is an LG K8 (K350z) Android 6.0
I tried these codes and still Nothing : 0000 - 00000 - 12345 - 1234
Anyone !!!
you have to put your phone in download mode
Your phone must be turned off before starting the steps from this guide.
1 So, press power button and select “power off”.
2 Then, press the volume up button on your LG K8
3 While you are holding the volume up button, plug in your phone’s USB cable.
4 Keep pressing the Volume up button until the download mode is being displayed.
if that not work search in youtube, after that you have to open lg bridge and flash again the firmware.
lg k8
ami tambn me aperecio lo mismo creo que hay que esperar que el fabricante haga permiso:guay:
---------- Post added at 06:40 AM ---------- Previous post was at 06:12 AM ----------
de donde sacastes los codigos
I just flashed ir and now that password is gone
Yasser Da Silva said:
I just flashed ir and now that password is gone
Click to expand...
Click to collapse
pudistes desbloquear el bootloader con la password
Jey Castro said:
pudistes desbloquear el bootloader con la password
Click to expand...
Click to collapse
el boot loader se desbloquea en adb con el comando fastboot oem unlock, una vez hecho eso, te hara confirmar. Ojo que uan vez que desbloqueas el boot loader el celular se resetea de fabrica.
i have this problem too. help please
So just this morning got the notification of Android 11 update on the Mi A3 EU variant. Same 1.40 GB as seen before. Has anyone updated safely yet ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have also received it today.
I updated yesterday, its working. Only NovaLaucher has problem, not default after reboot. But its nor problem.'
And also, Magisk 21.2 (relased yesterday) working perfect for root. I used classic OTA style (restore, images,install OTA, flash to inactiveslot).
I would suggest you wait. there are people reporting touchscreen issues. personally, I have updated with no major problems, although I'm facing some minor issues with the WiFi not connecting automatically.
Just updated mine, works very well and smooth. No major issues so far.
No problems with update here.
I have been with the update for two days without problems. But I am left wondering, can I still install miui 12 if it is based on Android 10 and the base is already 11? Did someone do it?
Translated with google translator:
Llevo dos días con la actualización sin problemas. Pero me quedo preguntándome, ¿puedo
seguir instalando miui 12 si está basado en Android 10 y la base ya es 11? ¿Alguien lo hizo?
Thanks fellas. It's working well so far.
JamieAmmar said:
Thanks fellas. It's working well so far.
Click to expand...
Click to collapse
which is build ?
I've just upgraded to V12.0.3.0.QFQEUXM and touch isn't working anymore
Same from for you guys? Thanks!
[QUOTE = "mr-mauro, publicación: 84336139, miembro: 4102099"]
Acabo de actualizar a V12.0.3.0.QFQEUXM y la función táctil ya no funciona
¿Lo mismo para ustedes? ¡Gracias!
---
No, but it was recommended to have done the installation after a restoration. qssi-user 11 RKQ1.200903.002 V12.0.2.0.RFQEUXM
Hello Folks!
Can this firmware be flashed without fear of damaging the device...
Download Mi A3 (laurel) V12.0.1.0.RFQEUXM MIUI 12 Stable Full Rom | XiaomiROM.com
The Stable update V12.0.1.0.RFQEUXM has been officially released for Mi A3 (codename is laurel). Before updating, please make sure you have downloaded …
xiaomirom.com
I am facing the same issue. The touchscreen doesn't work anymore.
Code:
*I am NOT responsible if you damage your device
*This ROM is only for Moto One Fusion (astro)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STOCK 10 LITE (ASTRO):
Changes:
-Debloat
-Auto installer via ADB
-Smoothness/Performance/Battery Enhancements
-Safetynet Basic
-Etc.
ATTENTION! THIS ROM WILL WIPE ALL YOUR DATA AND INTERNAL STORAGE AUTOMATICALLY WHEN THE INSTALLATION IS FINISHED.
DOWNLOAD LINK (GDRIVE):
STOCK LITE 10_astrofix.zip
drive.google.com
*BUGS:
**Some phones have problems with fingerprint, if you have it, reinstall stock rom 10 then flash this rom.
None, report if you find one.
*Fast installation via ADB
*Auto installer (unpack the zip file and run FLASHROM.bat)
*Before installing, reboot to bootloader via volume down and power button or adb reboot bootloader
*No IMEI problems
Android OS version: 10
Security patch level: April 2020
Kernel: Stock Android 10
Thanks to:
Veeronez for installer and tips
Syoker for testing
And all the Moto One Fusion spanish community for support and help
excellent rom download from android 11 to android 10 successfully without errors congratulations friend good management of ram very clean and optimized very happy thanks to you
gamerblack said:
excellent rom download f
gamerblack said:
excellent rom download from android 11 to android 10 successfully without errors congratulations friend good management of ram very clean and optimized very happy thanks to you
Click to expand...
Click to collapse
Greetings, I see that you were able to install the original rom with Android 10... the truth is that I also want to install that rom but I don't know some things to take into account to avoid blocking the device.How did you install the rom?...did you use adb and fastboot with that one command?
Click to expand...
Click to collapse
simplemente descargue la rom y haga clic en el archivo flashrom.bat, eso es todo lo demás cuando inicie el dispositivo, entrará en botloop, debe formatear los datos de fastboot para que la rom arranque, eso es todo
Bro no tienes una guía de instalación?
I am trying to remove the hard brick from my device, it does not fastboot or recovery, it just keeps flashing, I already found solutions, but whenever I put the Scatter-Loading file, it gives the error (5011)
I saw in videos that it was only necessary to delete one text from the scatter, but it doesn't have the text
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i am using is "MT6833 Android Scatter.txt" and a poco m4 pro 5g
it seems these are two scatter files in one file, one for EMMC and one for UFS flash storage. could be this is valid format but SP Flash Tool doesn't understand. Idk I haven't used SP Flash Tool for years.
according to this phone specifications that device is UFS storage.
https://www.gsmarena.com/xiaomi_poco_m4_pro_5g-11193.php
However, you can avoid the hassle with SP Flash Tool and scatter files with this python script, it is more safe as it reads scatter off device automatically. although it's a cmd line tool it even provides basic gui.
https://github.com/bkerler/mtkclient
nulll8328 said:
I am trying to remove the hard brick from my device, it does not fastboot or recovery, it just keeps flashing, I already found solutions, but whenever I put the Scatter-Loading file, it gives the error (5011)
I saw in videos that it was only necessary to delete one text from the scatter, but it doesn't have the text
View attachment 5801877
i am using is "MT6833 Android Scatter.txt" and a poco m4 pro 5g
Click to expand...
Click to collapse
could you share some updates on this issue? I have the same problem.
nulll8328 said:
Estoy intentando quitar el hard brick de mi dispositivo, no hace fastboot ni recovery, solo sigue parpadeando, ya encontre soluciones, pero cada vez que pongo el archivo Scatter-Loading me da el error (5011)
vi en videos que solo era necesario borrar un texto del scatter, pero no tiene el texto
View attachment 5801877
estoy usando "MT6833 Android Scatter.txt" y un poco m4
Click to expand...
Click to collapse
I have this same problem, is there a solution?