By eliminating with ADB the malware that comes with the OS I bricked my phone. Then I tried with SP-Tools to recover and deleted all the content.
I searched the entire network and didn't find no valid firmware for my K-Touch i10s mt6580.
If anyone could help me I would be very grateful.
I think a backup of a similar phone could save it or a stock rom?
Can someone help me?
Thanks in advance
vicfer said:
By eliminating with ADB the malware that comes with the OS I bricked my phone. Then I tried with SP-Tools to recover and deleted all the content.
I searched the entire network and didn't find no valid firmware for my K-Touch i10s mt6580.
If anyone could help me I would be very grateful.
I think a backup of a similar phone could save it or a stock rom?
Can someone help me?
Thanks in advance
Click to expand...
Click to collapse
SAME exact issue with mine.. need an Oreo 8.1 ROM for MTK6580.. I have the SP Flash Tool image for the MTK6739 Oreo ROM if someone could just port it over for the 6850.. it is the right setup: 2GB RAM / 16GB ROM......
Someone please read this!!
[ROM] STOCK ROM + TWRP K-Touch I10 mt6580 3GB RAM / 64GB ROM
plumpkibbles said:
SAME exact issue with mine.. need an Oreo 8.1 ROM for MTK6580.. I have the SP Flash Tool image for the MTK6739 Oreo ROM if someone could just port it over for the 6850.. it is the right setup: 2GB RAM / 16GB ROM......
Someone please read this!!
Click to expand...
Click to collapse
this might help:
androidfilehost.com/?fid=10763459528675591216
These are the stock scatter files and .bin image for the i10 running on the mt6580 3GB RAM / 64GB ROM created with miracle thunder box 2.93
The extras folder has a working version of twrp for the i10 running on the mt6580.
Related
Hello everybody.
I have this gadgetsfactory.com/c7500-smart-phone-android-2-3-os-3g-gps-wifi-4-3-inch-multi-touch-screen.html MTK6573 android phone (by GAGA as printed on the box) which i might add is half-bricked at this moment .
I have no backup of the ROM and the simple factory reset was useless from the beginning of its short life.
I would appreciate if someone has a backup ROM for this model ,or if you have any ideas i would be glad to hear it.
A few information you that might help you are the following:
Baseband version MAUI.11AMD.W11.37.SPV6 , 2011/10/29
Kernel version 2.6.35.7
Build Number 11HX8.Y8.120316.AD2_3_5_V3.QHDC_CN.COM_MCP_HTClogo
Thank you for your time
No ideas at all?
Try to port other MTK6573 Device rom
Sent from my Micromax A50 using xda app-developers app
Thank you for your answer.After reading a few things about porting roms (http://forum.xda-developers.com/showthread.php?t=1941239 & http://www.androidgladiator.com/2013/07/how-to-port-rom-for-mediatek-based-roms.html) i understand that i cannot do it because i don't have any base rom at all .I cannot make a backup of mine since i cannot boot into the OS .Neither Recovery mode has such a function .Thats why i need the stock rom.
daf3m said:
Hello everybody.
I have this gadgetsfactory.com/c7500-smart-phone-android-2-3-os-3g-gps-wifi-4-3-inch-multi-touch-screen.html MTK6573 android phone (by GAGA as printed on the box) which i might add is half-bricked at this moment .
I have no backup of the ROM and the simple factory reset was useless from the beginning of its short life.
I would appreciate if someone has a backup ROM for this model ,or if you have any ideas i would be glad to hear it.
A few information you that might help you are the following:
Baseband version MAUI.11AMD.W11.37.SPV6 , 2011/10/29
Kernel version 2.6.35.7
Build Number 11HX8.Y8.120316.AD2_3_5_V3.QHDC_CN.COM_MCP_HTClogo
Thank you for your time
Click to expand...
Click to collapse
If this device realy have MTK 6573? my device have MT 6575 but BaseBand, Kernel and BuildNumber are same as yours, and i found way to install Android 4.0.4 look here http://www.needrom.com/mobile/android-3g-c7500/ If still need for you.
I think this will help you becouse i flashed to my 512 mb ram version 1gb ram version rom from thl, so you can flash unbrick with SP Flash Tool this have 512mb ram version it has original phone kernel, boot, DSP_BL, Preloader, all other is from mtk6573/6575 device universal.
x2xdj said:
If this device realy have MTK 6573? my device have MT 6575 but BaseBand, Kernel and BuildNumber are same as yours, and i found way to install Android 4.0.4 look here http://www.needrom.com/mobile/android-3g-c7500/ If still need for you.
I think this will help you becouse i flashed to my 512 mb ram version 1gb ram version rom from thl, so you can flash unbrick with SP Flash Tool this have 512mb ram version it has original phone kernel, boot, DSP_BL, Preloader, all other is from mtk6573/6575 device universal.
Click to expand...
Click to collapse
Thank you but i cannot validate your method since i don't have it anymore.But i am sure it was 6573 cpu and 6575.Later models of the same design were equiped with the 6575 cpu.
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Please help me ...................................: Khóc:
can anyone help me
Looks like a BlueBo
This is probably your phone ...
http://www.aliexpress.com/item/5-5-...ll-Phone-Unlocked-GSM-MTK6572/1389400848.html
The screens (from aliexpress page) are quite misleading ... some show a full HD (1920x1080) device display, but the actual drivers are qHD (960x540).
Your best bet is to try some of the stock ROMS from needrom.com ... since you've hard bricked your phone, you don't have much to lose.
The BlueBo ROMs might just work, see ...
http://www.needrom.com/mobile/samsung-galaxy-rom-v6-b6000/
Your phone's hardware specs (CPU/ SoC,memory/ ROM, and display) are very close to the following ...
Cubot C11
Firefly S120
Xolo A600
Galaxy S4 Mini i9190 (aka GT-1318 or i1318)
http://forum.xda-developers.com/showthread.php?t=2507515&nocache=1
I may actually try the BlueBo ROM for the fun of it ... have to verify that I can dump and restore my original modem first
.
I believe i have same model of phone, and now i bricked it, i have backup but i dont have scatter file, so i cant restore my working state, and now i tried hundreds of different roms with flashtool, but screen is messed up, cant see anything
xdafan666 said:
This is probably your phone ...
The screens (from aliexpress page) are quite misleading ... some show a full HD (1920x1080) device display, but the actual drivers are qHD (960x540).
.
Click to expand...
Click to collapse
is there other way to flash the ROM other than via CWM ? the stock recovery can't work / read the zip file, i can't go into download mode since it using mandarin.
use MtkDroidTools
vrvz said:
I believe i have same model of phone, and now i bricked it, i have backup but i dont have scatter file, so i cant restore my working state, and now i tried hundreds of different roms with flashtool, but screen is messed up, cant see anything
Click to expand...
Click to collapse
you can create a scatter file by MtkDroidTools from your backup files.
There are a handful of ROMs available for MT6572. You can port them to your device by following very simple instructions. [For example: http://forum.xda-developers.com/showthread.php?t=2123239 ] You cannot usually get 100% ready made ROM for MTK devices, a little porting is kind of always necessary. But thankfully, that process is limited only to replacing a few files!
stock rom or CWM
viruson said:
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Click to expand...
Click to collapse
What do you need? Back up of CWM or stock rom?
Tell me I can help
mbba67 said:
What do you need? Back up of CWM or stock rom?
Tell me I can help
Click to expand...
Click to collapse
hello im need this rom please, stock rom please im need my telephone is bricked.
Note 3 Rom Required (MTK 6572)
vrvz said:
I believe i have same model of phone, and now i bricked it, i have backup but i dont have scatter file, so i cant restore my working state, and now i tried hundreds of different roms with flashtool, but screen is messed up, cant see anything
Click to expand...
Click to collapse
i have same note 3 model but hard bricked, i do not have backed rom, so can u please send me the rom for me, i will be grateful to u in this regard, send me rom at [email protected] or upload it to google drive and give me the link to download
mbba67 said:
What do you need? Back up of CWM or stock rom?
Tell me I can help
Click to expand...
Click to collapse
please im need this rom phone is bricked my email is: [email protected] please send
I have a similar device, any progress so far?
viruson said:
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Click to expand...
Click to collapse
i can help you, tell me what do you want?...si podes escribir español, mejor!!!
clone sm- n9006 mtk 6572 need stock rom...pls
i have also a problem this phone n9006 mtk 6572 i tried to many flash stock rom i can see in nedrom but not good for me......plssssssssssssssss help me ireally really need stock rom.... .you send me in my ym [email protected]
i yo neesito un backup
lesther70 said:
i can help you, tell me what do you want?...si podes escribir español, mejor!!!
Click to expand...
Click to collapse
Yo necesito un backup para hacer un restore a los datos ya q se tildea en eñ boot porfvor mi mail es [email protected] te lo gradeceria mucho
Please upload a NVRAM Backup for note 3 clone device deatails are
512ram, mt6572_S00 chipset, made in vietnam,
Rom sm n9006
I HAVE ROM SAMSUNG GALAXY NOTE 3 SM N9006 (100% tested rom)
SEND ME [email protected]
viruson said:
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Click to expand...
Click to collapse
Bro have u find any rom for this mobile??
Hey bro
Sorry for late rply.
I tried this one on my device ,it worked fine.
Here is the link https://mega.co.nz/#!Q9VxBLxK!d_dRG0...P4A4_bpe1s6AF8
Searched this link from XDA too.
http://forum.xda-developers.com/showthread.php?t=2725826&page=7
Hello guys,
i have a soft bricked CUBOT C7+ (Android 4.2.2) with an MTK6572M CPU and 512 MB ROM.
So now I want to ask if somebody of you have a CUBOT C7+ ROM dump
or could provide some to me?
The device uses a NAND Flash which is dumpable using SP Flash Tools.
I would actually need a boot.img and a system.img, recovery is working.
Thank you!
schrott3000 said:
Hello guys,
i have a soft bricked CUBOT C7+ (Android 4.2.2) with an MTK6572M CPU and 512 MB ROM.
So now I want to ask if somebody of you have a CUBOT C7+ ROM dump
or could provide some to me?
The device uses a NAND Flash which is dumpable using SP Flash Tools.
I would actually need a boot.img and a system.img, recovery is working.
Thank you!
Click to expand...
Click to collapse
Did you find a firmware? I have the same problem, but i need recovery
Do you still need it? I got a Cubot C7+ a few days ago and haven't done any system changes yet.
XanaRaquel said:
Do you still need it? I got a Cubot C7+ a few days ago and haven't done any system changes yet.
Click to expand...
Click to collapse
No, I have it. But, thanks for the offer.
hi all,
Good afternoon.
I bought new tablet Ambrance AQ - 880 and its having andriod 4.4.2
I want to update to Andriod 5 or 6.
can you please help me to do?
thanks in advance
have you flashed it
halovivek said:
hi all,
Good afternoon.
I bought new tablet Ambrance AQ - 880 and its having andriod 4.4.2
I want to update to Andriod 5 or 6.
can you please help me to do?
thanks in advance
Click to expand...
Click to collapse
have you flashed it.
do you have mt6580 or mt6582 chipset.
plz reply
iam also trying to flash and got bricked
Chipset 6580
vishnuajith said:
have you flashed it.
do you have mt6580 or mt6582 chipset.
plz reply
iam also trying to flash and got bricked
Click to expand...
Click to collapse
I am not able to fins ROM for Ambrane AQ880
if you got please share link of the ROM for 6580 Cchipset
Wondering why trying to upgrade tablet's Android OS: this tablet has only 1GB RAM - a ridiculous capacity, IMHO.
Please help me to find ROM for Ambrane AQ880, the flash file from flashfile.com is not working, i am getting error of chiptype mismatch, target chip: Mt6580, scatter file chip: my6582,
Hi everyone,
I bought an mini iphone clone on aliexpress. Very little,very cute
Android 8.1 installed but unfortunately no playstore installed and no root.
When I unlocked the bootloader, I kept on saying "Orange state, Your device has been unlocked and cant be trusted"
I flashed the boot.img file with SPflashTool........and now it's stucked. :crying:
Does anyone know what to do? I cannot find any firmware.
Anica I8 Smartphone 2.54" MTK6580M Quad Core 2GB RAM 16GB ROM
- Software version: Android 8.1.0
- alps-mp-o1.mp2
- Processor MT6580
- Kernel 3.18.79+
Does anyone has this phone and know how to handle?
Greetings from Holland
Johan
Me too. Need to know where to find its firmware
superpaddo said:
Hi everyone,
Does anyone know what to do? I cannot find any firmware.
Anica I8 Smartphone 2.54" MTK6580M Quad Core 2GB RAM 16GB ROM
- Software version: Android 8.1.0
- alps-mp-o1.mp2
- Processor MT6580
- Kernel 3.18.79+
Does anyone has this phone and know how to handle?
Greetings from Holland
Johan
Click to expand...
Click to collapse
I have the stable with gapps.
Its android 6 mm stock anica i8.
Got it from the anica supplier
theoppositeman said:
I have the stable with gapps.
Its android 6 mm stock anica i8.
Got it from the anica supplier
Click to expand...
Click to collapse
I also have ANICA I8.
Please share it with me.
rok kan said:
I also have ANICA I8.
Please share it with me.
Click to expand...
Click to collapse
do email me at [email protected]
will share the files i got from the supplier.
the files included simple guide on reflashing the firmware.
firmware based on android 6 (MM).
at least it helps me recover from soft brick
Wow, this post has been awhile now. Does any of you manage to get the little android phone working again? i just brought a i10 model and no gapp in it. Also if there is anyone can help me to get the proper gapp version for it?
Many thanks!