OrangeFox Recovery Project
Code:
Your warranty is now void. * * We're not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this recovery * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you.
OrangeFox is FREE SOFTWARE
Supports MIUI and Custom Roms
Credits
* OrangeFox Recovery Project Team
* @LUNARIO, who did ALL the work, but sadly opened a thread violating the rules and the link to Recovery was deleted and the thread moved. Original here.
FEATURES:
* Touch Screen every single time
* Decryption works
* Fixed Error 7 while clean or dirty flashing (starting from version 6)
* Migrate backup installation (starting from version 6)
* OTG support
* ROM Flashing works 100%
* F2FS Support
* Fastboot commands supported
NOT WORKING FOR NOW:
* Fastbootd
* ADB Sideload
* Backing up and restoring Image Flash (system-vendor-product)
DOWNLOAD
Version 6 - Google: https://drive.google.com/file/d/1eHM9ST9ni-55bbT3z-TGSZQsgE3KYr9s/view
OLD VERSION DOWNLOAD
Version 4 - Google: https://drive.google.com/file/d/1Qq6hqaEOstxajOC7Y6AGeRYajhMWjttL/view
Version 0 - Sourceforge: https://sourceforge.net/projects/or...x-R11.0_0_Alpha-Unofficial-surya.img/download
INSTALLATION
1. Download the OrangeFoxRecovery IMG file to your PC.
2. Restart your POCO X3 in Fastboot mode (Power+Vol Down)
3. Use ADB and type in the following command:
Code:
fastboot flash recovery "OrangeFox-R11.0_6_Alpha-Unofficial-surya.img"
4. After it is installed successfully, type in this command:
Code:
fastboot boot "OrangeFox-R11.0_6_Alpha-Unofficial-surya.img"
5. The device will automatically reboot into OrangeFox Recovery after installation (allow this to happen)
6. Enjoy!
Version Information
Status: Alpha
Alpha Release Date: 2020-10-14
Does it support dd commands to backup/flash persist.img?
I tried but after I flashed xiaomi eu and went back to recovery, the touchscreen would't work
hope this gets updated i like this recovery
olujnap316 said:
hope this gets updated i like this recovery
Click to expand...
Click to collapse
here you can download updated version, I have this flashed for around one week... so far so good, but still adb sideload not working... dunno what other bugs are there... I am flashing with this NitrogenOS.... zero problems for me so far...
jeryll said:
here you can download updated version, I have this flashed for around one week... so far so good, but still adb sideload not working... dunno what other bugs are there... I am flashing with this NitrogenOS.... zero problems for me so far...
Click to expand...
Click to collapse
yes i saw that on telegram. but why is it not updated on this thread.
olujnap316 said:
yes i saw that on telegram. but why is it not updated on this thread.
Click to expand...
Click to collapse
oh, you were talking about the thread itself, sorry... but the recovery itself will work the same regardless number of posts here on xda or telegram... I personally don't care where are new versions announced...
Not affiliated
olujnap316 said:
yes i saw that on telegram. but why is it not updated on this thread.
Click to expand...
Click to collapse
Because sadly I am not the developer and I cannot post Telegram links here.
I can update manually, as long as any of you guys DM me the link to the Telegram group, so I can join.
@jeryll @olujnap316
Can anyone of you guys provide the Telegram link for me to update the thread more often?
Best regards,
billabongstaff said:
Because sadly I am not the developer and I cannot post Telegram links here.
I can update manually, as long as any of you guys DM me the link to the Telegram group, so I can join.
@[email protected]
Can anyone of you guys provide the Telegram link for me to update the thread more often?
Best regards,
Click to expand...
Click to collapse
@POCox3OfficialUpdates just search that on telegram, they posted the latest orangefox there
Thank you
olujnap316 said:
@POCox3OfficialUpdates just search that on telegram, they posted the latest orangefox there
Click to expand...
Click to collapse
Thank you, man.
I appreciate it.
I'll try to keep the thread updated.
Best regards,
Are there any written instructions anywhere on how to run the adb tools and commands precisely? Total noob here
nikolaos8 said:
Are there any written instructions anywhere on how to run the adb tools and commands precisely? Total noob here
Click to expand...
Click to collapse
of course there are, you can use Google search with the exact query you posted here and you can then choose where to start learning or click here...
nikolaos8 said:
Are there any written instructions anywhere on how to run the adb tools and commands precisely? Total noob here
Click to expand...
Click to collapse
Very good for Beginners. ▼
For ADB
https://android.tutorials.how/adb-commands/#adb_devices_command
For FASTBOOT
https://android.tutorials.how/fastboot-commands/
Update.
New build is up.
Version 6.
Fixes error 7 while clean or dirty flashing.
Backup migration now works.
Cheers.
Thanks guys. Made small instructions video for the absolute noobs (me included).
Tools used: https://developer.android.com/studio/releases/platform-tools
Instructions on adb commands and flashing:
1. Bootloader Unlocked
2. Download the latest Orangefox boot.img from first post and put it into a dedicated folder in your computer.
3. Go to the folder where you have put the Orangefox-file. Now open a command window inside that folder. To do that hold together "Shift + Right click" on any empty white space inside the folder and then select "Open PowerShell Window Here" or "Open Command Window Here" (depends on your pc).
4. Enter fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
5. Enter the terminal command in command line: >>fastboot flash recovery OrangeFox-R11.0_6_Alpha-Unofficial-surya.img
(Needs to be exactly as the name of the file, in case developer uploads new version with new name)<<. Attention: Do not restart your device otherwise Xiaomi's original recovery might overwrite Orangefox!
6. After, device will reboot into Oangefox recovery.
Video Tutorial: https://youtu.be/E7fl_02Kgc8
I had also downloaded the latest Magisk zip (not Manager) from here: https://github.com/topjohnwu/Magisk/releases and placed it into the device before flashing Orangefox, so that i flash Magisk directly from recovery (as we left it above), in order to ensure it will not lose Orangefox installation after reboot.
In case it does not automatically reboot, hold +VOL + Power Button in order to reboot into the new orangefox recovery and install magisk zip from there ( do not forget to have it downloaded somewhere on your device before initiating the procedure)
Thanks everyone, especially OP for his contributions!
Factory reset /wipe prevents userdata to be decrypted? For twrp after you do a factory reset you have to format userdata even without password/pin inside the OS.
Can i backup persist partition with this recovery?
Hi!
I'm getting the error "Failed to map file" while I try to flash Magisk in this recovery.
Any help?
Hope this recovery will be official soon ! I don't know why there is no stable built yet of twp or yours ! I'm waiting for it to flash !
Jess182 said:
Can i backup persist partition with this recovery?
Click to expand...
Click to collapse
Yes you can using dd.
Related
Team Win Recovery Project v2.6.3.0
* Warning : You will lose your mobile warranty.
* I am not responsible if you brick your devices, or your SD cards is dead, or you getting fired because the alarm app failed.
* Please research about features included in this Kernel before flashing it! You are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
For Help: https://www.facebook.com/groups/GTS7262/
Changelog: Beta v1
1) Initial release of Team Win Recovery Project v2.6.3.0
2) Based on CWM Recovery v6.0.3.7
3) Has all features and fixes of above linked CWM recovery.
Installation: Follow flashing/installing TWRP/CWM instructions from this link: https://bit.ly/2NllOo9
Note: If your phone still doesn’t boot into TWRP mode then you will need to:
Download ADB platform tools and extract the contents to your C:/ drive.
Power on your mobile, go to Settings -> Developer Options -> Enable Developer Options -> Check USB debugging -> Home.
Now connect your device to PC with a USB Cable, press Windows + R button to open Run prompt. Type cmd and hit enter.
Type cd/ and hit enter. Type cd platform-tools and hit enter. Type adb devices and hit enter. If you found some random number as attached device then your mobile is connected in USB debugging mode else make sure you followed correct steps or install Samsung driver and repeat the steps.
Now type adb reboot recovery and hit enter. Your phone will now reboot into TWRP Recovery. Remove the USB Cable.
Download(s):
NEW Team Win Recovery Project v2.6.3.0: https://www.up-4ever.org/rrwkisby41f0
XDA:DevDB Information
Team Win Recovery Project v2.6.3.0, Tool/Utility for the Samsung Galaxy Star
Contributors
ItsAnilSingh
Source Code: https://github.com/omnirom/android_bootable_recovery
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2015-05-22
Created 2015-05-22
Last Updated 2020-01-07
Working features:
** All features working the way they are supposed to.
This is a beta version, I request you to first flash the linked CWM recovery first, take a whole rom backup before trying out this recovery. Will update the working and non-working features as I/some-other tests it.
Awesome !
I can guarantee, This recovery works flawlessly !
Thanx to dev ^_^
Enjoy !
Hats off bro @anilsingh .
late trying it but it works good.
knox
how knox removal work
B1ACkH3AR7 said:
I can guarantee, This recovery works flawlessly !
Thanx to dev ^_^
Enjoy !
Click to expand...
Click to collapse
vikrajsingh said:
Hats off bro @anilsingh .
Click to expand...
Click to collapse
[email protected] said:
late trying it but it works good.
Click to expand...
Click to collapse
Thanks all.
honey0029 said:
how knox removal work
Click to expand...
Click to collapse
Didn't get you?
thank you Bro :good:
Not work
Nothing works man nothing works:crying::crying::crying::crying::crying::crying::crying: but i finded another that works great no problem if anyone want it contact me because i cant send link to this post
im a new in this forum
tnx
any twrp for gts5282
i can't find any
kirtimaan01 said:
any twrp for gts5282
i can't find any
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...overy-teamwin-recovery-project-3-0-0-t3314308
great one thanks are you have rom link cm based
great job
@ItsAnilSingh
I followed the steps and flashed TWRP(your link is not working so I googled it) with Odin, two times but every time I try to get to recovery it gets to stock recovery, tried with two methods - hard buttons and with adb reboot recovery command, but only stock recovery shows up.
Can anybody please help?
I have the same problem with 5.0.1 - I9505XXUHPK2_I9505YXZHPL1_I9505XXUHPK2_HOME.tar.md5 and twrp-3.2.0-0-jfltexx.img.tar (S4 I9505). Can not get to recovery (freez) and after I just run android I an anter there again, but it is standard android recovery and can not put SuperSu :/
Ok. I needed to use one version older (also with older odin, but i think not odin but version 3.2.0 was a problem)
Yeahh that is not working....it stil reboot in to stock recovery
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
Code:
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption work
- Otg work
-Vibrator
- Zip Flash
- Mtp/adb
- F2FS support
- Fastbootd
- Adb sideload
- Backup restore and images flash
Not working:
-Tell me
INSTALLATION:
1. Download the TWRP image file to your PC.
2. Put your device into fastboot.
3. Type the following command to flash the recovery:-
Code:
fastboot flash recovery "name_of_recovery.img"
4. On installation of TWRP , to boot the recovery do:-
Code:
fastboot boot "name_of_recovery.img"
The device will automatically reboot into TWRP.
5-A. You are using Xiaomi.eu Miui or custom Rom?
You can enjoy with a functional Data Decrypt
5-B You are using Miui EEA - Global -Cn or any custom rom that doesn't ship custom vbmeta.
6. Download this zip, copy by pc or using otg and flash this zip that will prevent twrp replacing.7. Download VbMeta and flash by fastboot
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img"
7. Reboot into twrp (Take longer Time)
Code:
fastboot boot "name_of_recovery.img"
8. Format Data and Reboot
NOTES:
By Command fastboot boot, recovery will decrypt everytimes you need, also with Global Rom and without patched vbmeta.
Download:
TWRP
VbMeta
(Version tag will follow vendor, a lower version tag than your vendor does not mean that recovery will not work)
Kernel Source: HERE
Donation:
PayPal: paypal.me/manuelbiancodev
Telegram Group: @MBsRoom
One user reported that MTP doesn't work after formatting data, and reboot back to recovery also doesn't make it work again.
Personally I haven't tried it, but the mentioned issue is kinda similar to the last build of mauro's twrp for the phone, so just want to let you know and hope someone else can confirm.
I didn't find how to decrypt data using schema.
huyhung411991 said:
One user reported that MTP doesn't work after formatting data, and reboot back to recovery also doesn't make it work again.
Personally I haven't tried it, but the mentioned issue is kinda similar to the last build of mauro's twrp for the phone, so just want to let you know and hope someone else can confirm.
Click to expand...
Click to collapse
doesn't work after formatting data
zeduck said:
I didn't find how to decrypt data using schema.
Click to expand...
Click to collapse
there are problem to decrypt with 12.2.4 such as umi have to fastboot boot the recovery to decrypt
Thank you.
thought id give it a try...formatting data does indeed make the sdcard inaccessible via mtp; seems the necessary directories isnt created after formatting. if you have a rom installed, you will need to boot back into the rom then reboot to twrp which will now be mtp accessible. tested only on crdroid.
edit: managed to get mtp to work after formatting. after format data reboot to system but on the poco bootscreen, hold down vol up and power key to re-enter twrp, mtp then seems to work
New instructions for eea and global user, post updated.
Decryption works for both PIN and Pattern on EU weekly beta.
PIN didn't work with TWRP3.4.2b but now it is OK with your TWRP. Thank you!
okay.. finally can use my pin again..
cant mount /vendor /product /ODM
With this recovery we don't need anymore to format internal storage every time we change rom?
Redmi K30 Pro Zoom Edition: longer boot into recovery, than LR.Team's TWRP, but PIN decryption works (on mine it worked with LR.Team's too, but I had to cancel password input).
cerealguy said:
With this recovery we don't need anymore to format internal storage every time we change rom?
Click to expand...
Click to collapse
This is rom dependant, if you flash stock global or eaa for example, Yes is needed
New Release!
-Merged 3.5.1 teamwin recovery changes
-Cleaned and ordered twrp flags
-Support to system_ext ro mount
-Improvements into usb managing
manuelbianco said:
New Release!
-Merged 3.5.1 teamwin recovery changes
-Cleaned and ordered twrp flags
-Support to system_ext ro mount
-Improvements into usb managing
Click to expand...
Click to collapse
Touchscreen not working on this version.
karnasw said:
Touchscreen not working on this version.
Click to expand...
Click to collapse
Maybe you clicked into download latest but so dowloaded umi version download this https://sourceforge.net/projects/mbroms/files/TWRPLMI/MBTWRP_08-03-2021.img/download
manuelbianco said:
New Release!
-Merged 3.5.1 teamwin recovery changes
-Cleaned and ordered twrp flags
-Support to system_ext ro mount
-Improvements into usb managing
Click to expand...
Click to collapse
All fine on my Poco F2 Pro. Touchscreen works.
manuelbianco said:
Maybe you clicked into download latest but so dowloaded umi version download this https://sourceforge.net/projects/mbroms/files/TWRPLMI/MBTWRP_08-03-2021.img/download
Click to expand...
Click to collapse
You're right. I downloaded latest not LMI. My bad, sorry.
Do I have to do something special to backup and restore? I want to try some roms but I hate having to config back everything after rollback to the previous ROM.
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Works:
1. Decryption(Support pattern/pin, tested on V12.5.6 and 21.9.27)
2. MTP/ADB
3. Fastbootd
4. ADB Sideload
5. Vibration
6. ...
Features:
1. Android 11 Support
2. Magisk-v23.0 included
2. Prevent from replacing TWRP with stock recovery
3. DTBO Patch
4. Support for flashing rom(>=4GB)
5. Enable /cache partition
Not working:
1. Tell me
Changelog:
1. Initial release
INSTALLATION:
1. Download the TWRP image file to your PC.
2. Put your device into fastboot.
3. Type the following command to flash the recovery:-
Code:
fastboot flash recovery twrp-3.5.2-cas-xayah.img
4. Reboot to recovery
Download:
TWRP
Donation:
PayPal: https://paypal.me/XayahSuSuSu
Telegram Group: https://t.me/joinchat/iSOZ2LngNXEzYzk9
Source Code:
Tree: https://github.com/XayahSuSuSu/twrp_device_xiaomi_cas
Great job
But i faced one issue when i try to make a backup
How can i solve it ?
EDIT: In TWRP, go in "Advanced" menu => "Terminal" => Type: rm /data/extm -Rf
Source: Poney70
From Xiaomi.ea
Hi, when going from stock (fastboot) to this, which other images do I need, and where should I get them? I can see that the (old) guides mention flashing a "vbmeta"?
ballajalla said:
Hi, when going from stock (fastboot) to this, which other images do I need, and where should I get them? I can see that the (old) guides mention flashing a "vbmeta"?
Click to expand...
Click to collapse
Just follow my guide. You only need to flash rec.img
Can I also flash the Twrp.img through the Twrp I already have.?
*justintime* said:
Can I also flash the Twrp.img through the Twrp I already have.?
Click to expand...
Click to collapse
Of course
Xayah said:
Just follow my guide. You only need to flash rec.img
Click to expand...
Click to collapse
Thank you for your replay, but I am confused about the `rec.img` you mention, which image is this? I can only see one on github, which is `twrp-3.5.2-cas-xayah.img`
ballajalla said:
Thank you for your replay, but I am confused about the `rec.img` you mention, which image is this? I can only see one on github, which is `twrp-3.5.2-cas-xayah.img`
Click to expand...
Click to collapse
Thats it. My guide is just a example
Hi, why it take so much time for decrypting data?
Anyone installed an Android 12 ROM using this? I want to try updating to Xiaomi.eu MIUI13 the instant it comes out for the Mi 10 Ultra.
AerationCheese said:
Anyone installed an Android 12 ROM using this? I want to try updating to Xiaomi.eu MIUI13 the instant it comes out for the Mi 10 Ultra.
Click to expand...
Click to collapse
Not support A12
What are people using to flash the Android 12 ROMs on the Mi 10 Ultra then?
AerationCheese said:
What are people using to flash the Android 12 ROMs on the Mi 10 Ultra then?
Click to expand...
Click to collapse
I will flash Xiaomi EU Weekly MIUI 13 with fastboot. It was released yesterday.
MIUI 13 - 22.2.17/19
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
Could that Project be a solution for the camera? :
GitHub - AtomicXZ/vendor_xiaomi_miuicamera: MIUI cam for AOSP
MIUI cam for AOSP. Contribute to AtomicXZ/vendor_xiaomi_miuicamera development by creating an account on GitHub.
github.com
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM/Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Working Features:
- Decryption Works
- Backup works
- Wipes Work
- MTP
- ADB
- OTG
- RUI 2 ozip Flashing
- RUI 1 ozip flashing
Not Working:
- No f2fs support yet
- Not tested on CN variants (Can't confirm working status)
Flashing Guide:
Patched VBMETA is must to boot a twrp , so flash the below image to successfully boot this recovery and make it available even after booting back to RealmeUI.
Download Links:
TWRP Download Link
VBMETA Link
To flash TWRP:
fastboot flash recovery twrp-3.6-RUI2-RMX1931-final.img
Flash the VBMETA using below commands
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_path.img
ADB and Fastboot Drivers:
ADB and Fastboot Installer
Source code:
https://github.com/TeamWin/android_bootable_recovery
https://github.com/arnodorian-r/recovery_realme_RMX1931
https://github.com/arnodorian-r/kernel_realme_sm8150
Credits:
Thanks to @mrtechnophile2.0 , Roy for the testing
Thanks @pjgowtham @XiaoAk for guiding me
The best thing ever happened for realme ui 2. Great work mate..!
Finally, a proper working Recovery for our device
Wow...Finally Working TWRP for RMX1931 on RUI2.
Thanks alot bro.
Can I flash this, when I'm on Lineage-18.1?
zheka99 said:
Can I flash this, when I'm on Lineage-18.1
Click to expand...
Click to collapse
Technically its possible...but you should do it after roms released based on rui2 firmware. If not , you will endup with broken OS. For now dont flash custom roms with this recovery.
can i flash magysk to optine root, wich version?
Isavar said:
can i flash magysk to optine root, wich version?
Click to expand...
Click to collapse
Magisk-92546e8a(23016) from CANARY all Ok!
Sorry for my English. And thank you very much for your work. I have the mobile with the latest version of rui2 and with root done following this guide:
https://forum.xda-developers.com/t/...fix-rui-2-0-android-11-global-indian.4371041/ When I went to install twrp, the mobile only started in twrp , and I had to reinstall everything. I used realme flashtool and refollowed the guide to get me back up and running properly. What could have happened?
Leozgz85 said:
Sorry for my English. And thank you very much for your work. I have the mobile with the latest version of rui2 and with root done following this guide:
https://forum.xda-developers.com/t/...fix-rui-2-0-android-11-global-indian.4371041/ When I went to install twrp, the mobile only started in twrp , and I had to reinstall everything. I used realme flashtool and refollowed the guide to get me back up and running properly. What could have happened?
Click to expand...
Click to collapse
Hi
was the same for me, had to reinstall everything, only started in TWRP. Would like to install the recovery but I don't feel like this error anymore.
Thanks. It's working.
Doesnt work for me, i cant boot to realme ui after flashing the vbmeta, i got stuck on recovery. (f.14)
This recovery is broken for me, it gives me no space left on sdcard even after a full data reformat, ozip extraction stops after 500mb.
It's just not working as it should 3.4 works best
arnodorian-r said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM/Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Working Features:
- Decryption Works
- Backup works
- Wipes Work
- MTP
- ADB
- OTG
- RUI 2 ozip Flashing
- RUI 1 ozip flashing
Not Working:
- No f2fs support yet
- Not tested on CN variants (Can't confirm working status)
Flashing Guide:
Patched VBMETA is must to boot a twrp , so flash the below image to successfully boot this recovery and make it available even after booting back to RealmeUI.
Download Links:
TWRP Download Link
VBMETA Link
To flash TWRP:
fastboot flash recovery twrp-3.6-RUI2-RMX1931-final.img
Flash the VBMETA using below commands
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_path.img
ADB and Fastboot Drivers:
ADB and Fastboot Installer
Source code:
https://github.com/TeamWin/android_bootable_recovery
https://github.com/arnodorian-r/recovery_realme_RMX1931
https://github.com/arnodorian-r/kernel_realme_sm8150
Credits:
Thanks to @mrtechnophile2.0 , Roy for the testing
Thanks @pjgowtham @XiaoAk for guiding me
Click to expand...
Click to collapse
I followed this guide and many others in the past 48 hours, with no success. Every time I flash TWRP and the VBMETA, I get stuck in TWRP bootloop.
I started unblocking the bootloader, rolling back to RUI1 - Android 9 and using the Deep-Test App.
After the roll back, I got the phone unblocked right, but then first soft-brick, with only bootloader available and no way to flash a working ROM. After some searches, I've finally managed to unbrick, using OPPO flash tool, and installing stock rom RMX1931_11_F.14_2021102817443142.
This gives me a working phone, RUI.2 - Android 11. Standard recovery.
I tried to flash TWRP and got the phone soft bricked again, in TWRP recovery bootloop.
I'd like to install TWRP and from there going to OrangeFox and finally install Lineage 19.1...
How can i first have a working TWRP recovery??? If you can support also following steps, would be amazing. Thank you!!!
I went few step further... but still I am not able to install a working custom recovery for my realme X2 pro.
I have now also rooted my device with magisk.
I just need a custom recovery to perform 2 actions:
- make a NANDroid backup;
- install a custom ROM.
Any advice? Thank you for your time!
Installed. Working like a charm with lineage 19.1. Only problem: can't access files in storage. Digging into the matter, it seems to be an issue with android 12's new encryption method, which can't be overriden by this version of the recovery. There's a brand new TWRP 3.7.0_9.0 in the official TWRP website which boasts to overcome this problem but, whenever I try to install it (with or without the vbmeta.img provided for version 3.6.0_11), the recovery won't start. Guess a new vbmeta.img is needed as everything goes ok reinstalling TWRP 3.6.0_11 and its corresponding vbmeta. Tried to extract and install vbmeta.img from the lineage zip file without success. Shall we have to patch vbmeta.img? How can we do that? Through Magisk? I've come across some "vbmeta patcher" apk... Am I pointing the right way?
can any one help me to unlock bootloader in realme x2 pro . i am on RUI 10 . i installed in depth tool it said seccesful but no bootloader just keep rebooting and showing fast boot for a moment .. help please i search every where for fix but no way to yet
I'm using the CN variant device, which I understand does not yet have confirmed support, nonetheless sharing the error I'm encountering in case it's a simple or obvious fix I'm missing.
Having followed all above steps, I'm able to flash and get into TWRP recovery, but decryption always failed (even after a dozen tries) with the following:
"Attempting to decrypt FBE for user 0...
Failed to decrypt user 0"
Much obliged for any insight on this. I'm attempting to get back on OF after successfully installing Lineage 19.1, which broke the OF recovery, and since OF needs to be installed as a ZIP, I need to get some version of TWRP working as an intermediary. Specifically this is because I didn't install GAPPS along with Lineage 19.1 (I misread the opening post, which seemed to imply that GAPPS was included in that particular ROM). So alternatively, if there's another way to get GAPPS onto the device without recovery (sideload won't work since I can't decrypt...) then that would be helpful too.
Thanks in advance for any insight on this!
TWRP FOR THE A52 5G! (With issues)
Help needed!
Are you someone that has ported TWRP before without any issues?
Or are you someone that knows how to fix any problem that has been listed in the 'Additional Notes' section?
PM me. We can work together to fix the issue(s)
Note
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about doing this to your device
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Additional Notes
Code:
THIS RECOVERY IS NOT FULLY TESTED!
There are atleast these issues:
1. MTP Does NOT work. (Not with computer or with OTG)
2. NO access to your SD cards
3. Incorrect resolution (TWRP is 1080x1920, phone is 1080x2400)
4. Temperature sensor doesn't work.
THERE MIGHT BE MORE ISSUES I DO NOT KNOW OF! FLASH AT YOUR OWN RISK.
How to install?
First of all you need an unlocked BL. This is extremely easy to do and there are a lot of guide online.
Download recovery.tar (TWRP) from this post.
Select the AP slot in Odin
Disable auto reboot in Odin
Flash
Credits
TeamWin Recovery Project
Source code:
Minimal TWRP AOSP: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp
Device Tree for the a52 5g: Can't upload because of 25mb+ kernel file. Will make a custom kernel soon
Thank you so much for your work on TWRP. Waited for it a year
GiulianoB said:
Thank you so much for your work on TWRP. Waited for it a year
Click to expand...
Click to collapse
No problem.
Hi,
Firstly, thanks for doing this!
Secondly, I've been trying to flash a zip (BluetoothLibraryPatcher) but I cannot find a way to get TWRP to read a zip file. Things I've tried:
From the device itself: The data partition is encrypted. twrp decrypt (in the TWRP terminal) says "No crypto support was compiled into this build".
From ADB Sideload: It gets stuck on "Starting ADB sideload feature..." for 5 minutes, then fails.
From MTP/USB OTG: As you say in your post, neither MTP from PC nor from a USB flash drive works.
Would you have any idea of how I can get TWRP to read a zip file to install?
Thanks!
ByteSizedBit said:
Hi,
Firstly, thanks for doing this!
Secondly, I've been trying to flash a zip (BluetoothLibraryPatcher) but I cannot find a way to get TWRP to read a zip file. Things I've tried:
From the device itself: The data partition is encrypted. twrp decrypt (in the TWRP terminal) says "No crypto support was compiled into this build".
From ADB Sideload: It gets stuck on "Starting ADB sideload feature..." for 5 minutes, then fails.
From MTP/USB OTG: As you say in your post, neither MTP from PC nor from a USB flash drive works.
Would you have any idea of how I can get TWRP to read a zip file to install?
Thanks!
Click to expand...
Click to collapse
Hey, you can use commands by just being on the home screen of TWRP. ADB push <file location and name> /sdcard
ByteSizedBit said:
Hi,
Firstly, thanks for doing this!
Secondly, I've been trying to flash a zip (BluetoothLibraryPatcher) but I cannot find a way to get TWRP to read a zip file. Things I've tried:
From the device itself: The data partition is encrypted. twrp decrypt (in the TWRP terminal) says "No crypto support was compiled into this build".
From ADB Sideload: It gets stuck on "Starting ADB sideload feature..." for 5 minutes, then fails.
From MTP/USB OTG: As you say in your post, neither MTP from PC nor from a USB flash drive works.
Would you have any idea of how I can get TWRP to read a zip file to install?
Thanks!
Click to expand...
Click to collapse
Btw, afaik the encryption problem isn't something I can remove.
This is fantastic to see! Nice work.
Have you tried any custom ROMs with this? Do any of the current custom ROMs (like Lineage OS) support A52 5G, or are we still a far way away from that?
biscuitpants said:
This is fantastic to see! Nice work.
Have you tried any custom ROMs with this? Do any of the current custom ROMs (like Lineage OS) support A52 5G, or are we still a far way away from that?
Click to expand...
Click to collapse
Hey. I've not started a custom ROM yet. I've been busy with school mostly. I will probably start developing Lineage OS as the first custom rom.
Things405 said:
Hey. I've not started a custom ROM yet. I've been busy with school mostly. I will probably start developing Lineage OS as the first custom rom.
Click to expand...
Click to collapse
Good luck and thanks again for your effort
Hey! I found this on GitHub and I was wondering if it's you. Your post is still saying "Will upload in a minute". Thanks!
MeowNyaaa said:
Hey! I found this on GitHub and I was wondering if it's you. Your post is still saying "Will upload in a minute". Thanks!
Click to expand...
Click to collapse
Yep thats me. I can't upload a kernel file on github as its 25mb+ So the device tree won't be complete without it. I'll change the post.
Things405 said:
Yep thats me. I can't upload a kernel file on github as its 25mb+ So the device tree won't be complete without it. I'll change the post.
Click to expand...
Click to collapse
I recommend using Git LFS for that, more info about it here: https://git-lfs.github.com/
I created a device tree myself long time ago as well, was just missing the kernel
I may sell my U1 for the Dual Sim model so I can root. I need parts of this lol
Any progress?
I just can't wait for LineageOS
@Things405 I have GitHub pro if you want someone to host the device tree on there... I'm on https://github.com/SImPilotAdamT/
Also by A52 5G do you mean the A526B?
Also for some reason I can't unlock the bootloader in my device... I have the A526B international model. https://forum.xda-developers.com/t/unable-to-unlock-the-bootloader-a52-5g-sm-a526b.4476861/
TWRP 3.7.0 is out with the support for decryption on Android 12 to be able to backup firmware. Pls update, thx
I'm sorry to have left you guys hanging! I've been too busy with personal stuff but I will get back on this as soon as possible.
flashed in A526BXXU1AUAH, when press buttons for recovery, it freeze on boot logo
does this also work for the a52s 5g version?
LuzzyKins said:
does this also work for the a52s 5g version?
Click to expand...
Click to collapse
No, the version you should be looking at is: https://forum.xda-developers.com/t/recovery-official-twrp-3-7-0-2-for-galaxy-a52s-5g.4488419/