twrp supporting the weekly miui 20.10.15 with a new karnel???:crying:
88kiko said:
twrp supporting the weekly miui 20.10.15 with a new karnel???:crying:
Click to expand...
Click to collapse
If the 20.10.15 and kernel is in a compatible zip for twrp then twrp will be able to flash it
it is possible to flash, but it is said that after the flash you enter the twrp system does not load again and you have to restore the whole mobile phone
88kiko said:
it is possible to flash, but it is said that after the flash you enter the twrp system does not load again and you have to restore the whole mobile phone
Click to expand...
Click to collapse
What rom were you on before? You may have to format data by typing yes in twrp
previous ROM ..... this is written in chagelong last update.
Hope they fix twrp soon
Superwitschi Designs
I clean flash that new rom, i was on lineage, and no problem with flashing, twrp works, also magisk, and safety net pass with magisk hide.
Superwitschi said:
Hope they fix twrp soon
Superwitschi Designs
Click to expand...
Click to collapse
I hope so too
TWRP works exactly the same with the CN 20.10.15 as it does with all the CN A11 betas.
Fastboot boot twrp, do not flash it ! It really isn't difficult!
if you want to update the betas then you need to change the update-binary in the zip file from an A10 build.
Did somone test this one?
https://youtu.be/xA_GNBE-ZfU
Superwitschi Designs
Superwitschi said:
Did somone test this one?
https://youtu.be/xA_GNBE-ZfU
Superwitschi Designs
Click to expand...
Click to collapse
Edit: i flashed it and it works but it's not decrypted! USB OTG works.
Superwitschi Designs
Related
Hi guys I was on official mm then I came back to lollipop , installed twrp wiped data to install ROM then I booted into the ROM I stuck at 1 plus logo. My recovery (twrp) was working(thank God) , Now I am only able to install OOS please help me out.
9888 said:
Hi guys I was on official mm then I came back to lollipop , installed twrp wiped data to install ROM then I booted into the ROM I stuck at 1 plus logo. My recovery (twrp) was working(thank God) , Now I am only able to install OOS please help me out.
Click to expand...
Click to collapse
Can't use the twrp you used on OS 3 for ROMs that don have updated bootloader (currently Ashwins CM13, CM14 do.) For the rest you have to use original twrp. You can just flash it in your current recovery by pressing IMG button bottom right.
Exodusche said:
Can't use the twrp you used on OS 3 for ROMs that don have updated bootloader (currently Ashwins CM13, CM14 do.) For the rest you have to use original twrp. You can just flash it in your current recovery by pressing IMG button bottom right.
Click to expand...
Click to collapse
Bro I am using original twrp IMG
9888 said:
Bro I am using original twrp IMG
Click to expand...
Click to collapse
Sorry I was just guessing so many people having issues lol. What ROM and are you flashing anything after ROM like root etc?
Exodusche said:
Can't use the twrp you used on OS 3 for ROMs that don have updated bootloader (currently Ashwins CM13, CM14 do.) For the rest you have to use original twrp. You can just flash it in your current recovery by pressing IMG button bottom right.
Click to expand...
Click to collapse
Exodusche said:
Sorry I was just guessing so many people having issues lol. What ROM and are you flashing anything after ROM like root etc?
Click to expand...
Click to collapse
It's not time to guess please help me
9888 said:
It's not time to guess please help me
Click to expand...
Click to collapse
Did you install OS 2 before you flashed original twrp?
You have tou use the correct corresponding twrp for each Android version. Official 3.0.20 and unofficial oos 3 twrp version don't work both ways.
Omicron Technics
Fastboot install old OnePlus recovery, then flash OOS 2.2.3.
Then fastboot flash Official TWRP.
Exodusche said:
Did you install OS 2 before you flashed original twrp?
Click to expand...
Click to collapse
yes
Kéno40 said:
Fastboot install old OnePlus recovery, then flash OOS 2.2.3.
Then fastboot flash Official TWRP.
Click to expand...
Click to collapse
ok
Never mind, I flashed Alka TWRP
I unlocked my Redmi Note 3 Pro (Kate) today and wanted to flash TWRP. However I could only find links to TWRP for Kenzo. Could anyone help me with this?
Thanks
Use Alka its perfectly working in kate. Don't forget to flash Lazy Flasher.
http://www.mediafire.com/file/febttn8piu0vfae/recovery+Alka+Update.zip
http://forum.xda-developers.com/attachment.php?attachmentid=3853609&d=1472076129
Rifatspir said:
Use Alka its perfectly working in kate. Don't forget to flash Lazy Flasher.
http://www.mediafire.com/file/febttn8piu0vfae/recovery+Alka+Update.zip
http://forum.xda-developers.com/attachment.php?attachmentid=3853609&d=1472076129
Click to expand...
Click to collapse
What is lazy flasher..?
Also, just FYI, the stock TWRP for Kenzo doesn't play nice with the internal storage on kate - files copied over in TWRP are not able to be modified in any way in Android even with root.
stephendt0 said:
What is lazy flasher..?
Also, just FYI, the stock TWRP for Kenzo doesn't play nice with the internal storage on kate - files copied over in TWRP are not able to be modified in any way in Android even with root.
Click to expand...
Click to collapse
lazy flasher zip disables the forced encryption which is enabled by default on MIUI Marshmallow ROMs.
Rifatspir said:
lazy flasher zip disables the forced encryption which is enabled by default on MIUI Marshmallow ROMs.
Click to expand...
Click to collapse
Hi there,
how to Use lazy flasher zip?
Thanks
Ivanty said:
Hi there,
how to Use lazy flasher zip?
Thanks
Click to expand...
Click to collapse
Just flash that it, if you're in MIUI rom....! :good: there is no interface but you can see an option in TWRP recovery setting (below).
Rifatspir said:
Just flash that it, if you're in MIUI rom....! :good: there is no interface but you can see an option in TWRP recovery setting (below).
Click to expand...
Click to collapse
Sorry for bothering You...
Just to be clear.
First I have to flash TWRP3_Kenzo via ADB?
Then I have to install Alka via TWRP3 interface?
And then I have to install Lazy Flasher again via TWRP3 interface?
Is it OK or Not?
But what if I can not see internal storage, because it is encrypted? Do I have to use external USB flash drive for Alka and Lazy zips???
Thanks
Ivanty said:
Sorry for bothering You...
Just to be clear.
First I have to flash TWRP3_Kenzo via ADB?
Then I have to install Alka via TWRP3 interface?
And then I have to install Lazy Flasher again via TWRP3 interface?
Is it OK or Not?
But what if I can not see internal storage, because it is encrypted? Do I have to use external USB flash drive for Alka and Lazy zips???
Thanks
Click to expand...
Click to collapse
Yeah keep going.. in case if you cant see internal storage then flash ZCX recovery (install image) from your sd card or usb flash & then flash lazy. This recovery is good for MiUi rom user you can use ota update.
http://forum.xda-developers.com/redmi-note-3/how-to/zcx-twrp-install-twrp-flash-supersu-t3462448
Rifatspir said:
Use Alka its perfectly working in kate. Don't forget to flash Lazy Flasher.
http://www.mediafire.com/file/febttn8piu0vfae/recovery+Alka+Update.zip
http://forum.xda-developers.com/attachment.php?attachmentid=3853609&d=1472076129
Click to expand...
Click to collapse
Hi there, I've been reading a lot of post recommending ALKA TWRP but they were old (from may or june).
Then (post from august) I've read that Alka + miui with MM results in phone bricked.
And nobody said anything about LazyFlasher.
I'm running MIUI 8.1.1.0 Global Estable (Android 6.0.1)with officialy unlocked bootloader, will Alka be ok to flash?
What's the reason to flash lazy flasher? Thanks in advance.
mesplamax said:
Hi there, I've been reading a lot of post recommending ALKA TWRP but they were old (from may or june).
Then (post from august) I've read that Alka + miui with MM results in phone bricked.
And nobody said anything about LazyFlasher.
I'm running MIUI 8.1.1.0 Global Estable (Android 6.0.1)with officialy unlocked bootloader, will Alka be ok to flash?
What's the reason to flash lazy flasher? Thanks in advance.
Click to expand...
Click to collapse
I dont know about these post, i flashed 2 month ago....
They didn't flashed lazy flasher thats why maybe phone bricked... Just flash Alka after unlocking bootloader then lazy flasher then reboot. Thats it.
*lazy flasher zip disables the forced encryption which is enabled by default on MIUI Marshmallow ROMs
This is the best YouTube guide, you should follow....
https://m.youtube.com/watch?v=G_P7Qd3kpAI
Note:- Follow my words at your own risk. I'm not responsible
Rifatspir said:
They didn't flashed lazy flasher thats why maybe phone bricked... Just flash Alka after unlocking bootloader then lazy flasher then reboot. Thats it.
*lazy flasher zip disables the forced encryption which is enabled by default on MIUI Marshmallow ROMs
This is the best YouTube guide, you should follow....
https://m.youtube.com/watch?v=G_P7Qd3kpAI
Click to expand...
Click to collapse
Thanks, I will give it a try in the evening and report back.
mesplamax said:
Thanks, I will give it a try in the evening and report back.
Click to expand...
Click to collapse
Before do that try to learn first that, what you should do when your phone bricked. Always be advance You can follow youtube or miui forum for help
Don't forget to backup in sd card before flash anything...
Rifatspir said:
Before do that try to learn first that, what you should do when your phone bricked. Always be advance You can follow youtube or miui forum for help
Click to expand...
Click to collapse
Ok, will do.
PD: Another thing, will I be able to install updates (via TWRP) without having to flash the TWRP and SuperSu again?
mesplamax said:
Ok, will do.
PD: Another thing, will I be able to install updates (via TWRP) without having to flash the TWRP and SuperSu again?
Click to expand...
Click to collapse
Once you've installed twrp you can do whatever you want, like me.. I'm using nougat 7.1.1 :laugh:
Dude, there is Google. You should ask him. You will learn a lot.......:good:
TWRP built for the Moto X Play. It should work fine, but using it is a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. Fastboot mode is used to flash or boot this recovery.
Flash through twrp or fastboot
To temporarily boot this recovery:
Code:
fastboot boot twrp.img
Click to expand...
Click to collapse
To permanently flash it:
Code:
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Official
Unofficial
XDA:DevDB Information
[OFFICIAL] TWRP 3.4.0.0 [lux], Tool/Utility for the Moto X Play
Contributors
althafvly
Source Code: https://github.com/TeamWin/android_kernel_motorola_msm8916
Version Information
Status: Stable
Created 2018-08-28
Last Updated 2020-10-19
Reserved
hmm.. what does this mean? does it mean that it opens up for treble support? or does this bring treble support? either way, thank you
How's your twrp different from @squid2 's ?
Will GSIs boot on lux if this recovery is used properly? Just wanna know if anyone tried.
plb-dev said:
Will GSIs boot on lux if this recovery is used properly? Just wanna know if anyone tried.
Click to expand...
Click to collapse
I tried and it would not boot. I have a question to you, from which stock rom did you upgrade to custom roms? I am trying different modem imgs and none of them are really good.
Shepxda said:
I tried and it would not boot. I have a question to you, from which stock rom did you upgrade to custom roms? I am trying different modem imgs and none of them are really good.
Click to expand...
Click to collapse
The first custom ROM i installed was AICP N from stock 6.0.1 . Then I kept switching between nougat ROMs, and even some alpha oreo ROMs. When stock 7.1.1 came out I installed it, kept for a while and then kept switching between custom ROMs again. Currently in LOS14.1 .
New Twrp Builds Based Android 9.0
https://sourceforge.net/projects/althafvly/files/twrp/
althafvly said:
New Twrp Builds Based Android 9.0
https://sourceforge.net/projects/althafvly/files/twrp/
Click to expand...
Click to collapse
now while you going to be official maintainer for lineageOS why don't put twrp on the twrp official device status too!
This TWRP version works fine. Thanks OP for the build!
LineageOS 17 falied to flash OTA
I guess my post thread makes it more clear what's the issue. I had downloaded latest update and it failed to flash the update(TWRP). It booted to recovery well from updated menu. I am attaching logs for the same.
@althafvly any word from you?
methuselah said:
I guess my post thread makes it more clear what's the issue. I had downloaded latest update and it failed to flash the update(TWRP). It booted to recovery well from updated menu. I am attaching logs for the same.
Click to expand...
Click to collapse
You need to use lineage recovery for ota support. Lineage is now more focused on lineage recovery than twrp. Older/newer twrp might or might not work.. Because lineage17 officially support lineage recovery.
althafvly said:
TWRP built for the Moto X Play. It should work fine, but using it is a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. Fastboot mode is used to flash or boot this recovery.
Flash through twrp or fastboot
To temporarily boot this recovery:
Code:
To permanently flash it:
Code:
Download
XDA:DevDB Information
[UNOFFICIAL] TWRP 3.4.0.0 [lux], Tool/Utility for the Moto X Play
Contributors
althafvly
Source Code: https://github.com/twrp-m8916/twrp_recovery_manifest
Version Information
Status: Stable
Created 2018-08-28
Last Updated 2020-06-12
Click to expand...
Click to collapse
THANKS :highfive::highfive::highfive::highfive::highfive::highfive::highfive::highfive::silly::silly::silly::silly::silly:
Official Builds Up (android-9.0 based)
thanks for the official support. You have really achieved a lot lately! does the official version work with ota von los17? some device this will not work from may 2020.
Hi guys. I currently have built 3.1.1-r1.
I am having troubles installing LineageOS 17.1 weeklies.
Then I said, I need to update TWRP.
But, I already did data wipe on my phone.
Is it still possible to flash new TWRP? I find I only need to boot into fastboot, then fastboot flash recovery twrp.img and then back to recovery. Is that right?
teteu86 said:
Hi guys. I currently have built 3.1.1-r1.
I am having troubles installing LineageOS 17.1 weeklies.
Then I said, I need to update TWRP.
But, I already did data wipe on my phone.
Is it still possible to flash new TWRP? I find I only need to boot into fastboot, then fastboot flash recovery twrp.img and then back to recovery. Is that right?
Click to expand...
Click to collapse
Yes, that should work. Look here for more details on how to do it properly (just ignore the bit about LOS recovery if you need TWRP):
Install LineageOS on lux | LineageOS Wiki
wiki.lineageos.org
works LOS OTA with TWRP 3.5.0 again? I am currently using LOS recovery but would like to use twrp again because of backup and settings. has anyone tested it?
R!ffRaff said:
works LOS OTA with TWRP 3.5.0 again? I am currently using LOS recovery but would like to use twrp again because of backup and settings. has anyone tested it?
Click to expand...
Click to collapse
unfortunately not, the OTA update no longer destroys the LOS but the update script does not run. the phone boot into the twrp, that's it
for aööe who want to have OTA updates should switch to the lineage recovery. for all others who need a manual update, you can continue to use twrp
I'm on official miui 10 version 10.3.7 and I have twrp installed and rooted with magisk. I wanna keep the root but also upgrade to 10.3.8.
How should I do this?
You can install the globe rom from this side.
https://mi-globe.com/miui-firmware-rom-builder-features/65/
Click on miui 9.6.27 and then select the 10.3.8.0 stable version.
Configure what ever you want and flash it with twrp.
ParsaMrrelax said:
I'm on official miui 10 version 10.3.7 and I have twrp installed and rooted with magisk. I wanna keep the root but also upgrade to 10.3.8.
How should I do this?
Click to expand...
Click to collapse
Install new room + magisk with TWRP. Dont wipe data, dirty flash rom.
Alvian_P said:
Install new room + magisk with TWRP. Dont wipe data, dirty flash rom.
Click to expand...
Click to collapse
Should I download the full rom or only the ota update zip? what about FED ? should i flash that as well?
ConradB said:
You can install the globe rom from this side.
https://mi-globe.com/miui-firmware-rom-builder-features/65/
Click on miui 9.6.27 and then select the 10.3.8.0 stable version.
Configure what ever you want and flash it with twrp.
Click to expand...
Click to collapse
Thanks very much. This a very nice site
Hi guys.
I'm on MIUI Global 12.5.1.0 RKIEUOR. Already unlocked the device and would like to root with Magisk, so I'm looking for boot.img to patch it with Magisk app, but the only rom version I can find to extract boot.img for 12.5.1.0 is RKIEUXM.
Would it matter if I use this one?
Why can't you just download twrp (I know it's in development but it works) and just flash magisk via it?
mejsi said:
Why can't you just download twrp (I know it's in development but it works) and just flash magisk via it?
Click to expand...
Click to collapse
Is there really a working twrp for renoir? Having trouble finding one that works for this phone.
Scroll down for it. It has a few issues but it works. I have rooted Mi 11 Lite 5g Touchscreen may not work for a few seconds but after that it works perfectly.
Rejerf said:
Is there really a working twrp for renoir? Having trouble finding one that works for this phone.
Click to expand...
Click to collapse
that's the last one who works correctly TWRP-3.5.2-renoir-Nebrassy
Rejerf said:
Hi guys.
I'm on MIUI Global 12.5.1.0 RKIEUOR. Already unlocked the device and would like to root with Magisk, so I'm looking for boot.img to patch it with Magisk app, but the only rom version I can find to extract boot.img for 12.5.1.0 is RKIEUXM.
Would it matter if I use this one?
Click to expand...
Click to collapse
My phone was is running an EMEA ROM, once the latest 12.5 update popped there was no archive version with .img files inside, so I downloaded the ROM for a different region (similar version, though), extracted the boot.img, patched it with Magisk and flashed it to the phone. Everything works fine, no issues.
ZeroCGTI said:
My phone was is running an EMEA ROM, once the latest 12.5 update popped there was no archive version with .img files inside, so I downloaded the ROM for a different region (similar version, though), extracted the boot.img, patched it with Magisk and flashed it to the phone. Everything works fine, no issues.
Click to expand...
Click to collapse
imo the easiest way is just booting twrp (not flashing) and install magisk
I need the boot patch image image please help
rayman95 said:
that's the last one who works correctly TWRP-3.5.2-renoir-Nebrassy
Click to expand...
Click to collapse
What's wrong with official 3.6.0?
Rejerf said:
Hi guys.
I'm on MIUI Global 12.5.1.0 RKIEUOR. Already unlocked the device and would like to root with Magisk, so I'm looking for boot.img to patch it with Magisk app, but the only rom version I can find to extract boot.img for 12.5.1.0 is RKIEUXM.
Would it matter if I use this one?
Click to expand...
Click to collapse
https://xiaomifirmwareupdater.com should have it.
By use of MIUI Downloader from Google Play, you can easily locate/download all kinds of stock (and Xiaomi eu) ROMs and TWRP for your Xiaomi device
testguest said:
What's wrong with official 3.6.0?
Click to expand...
Click to collapse
It was 3 months ago..3.6 was not created
rayman95 said:
It was 3 months ago..3.6 was not created
Click to expand...
Click to collapse
Download TWRP for renoir
Download TWRP Open Recovery for renoir
eu.dl.twrp.me
testguest said:
Download TWRP for renoir
Download TWRP Open Recovery for renoir
eu.dl.twrp.me
Click to expand...
Click to collapse
I know, why post you the link???
rayman95 said:
I know, why post you the link???
Click to expand...
Click to collapse
rayman95 said:
It was 3 months ago..3.6 was not created
Click to expand...
Click to collapse
22.1.5 doesn't work that way for me, by the way.
Neither with Magsik Stable/Beta, nor with Magisk Canary. Phone keeps ending in a bootloop. 21.12.29 was fine.
testguest said:
22.1.5 doesn't work that way for me, by the way.
Neither with Magsik Stable/Beta, nor with Magisk Canary. Phone keeps ending in a bootloop.
Click to expand...
Click to collapse
Sorry, I don't understand. You did root Xiaomi.eu 22.1.5 by flashing Magisk through TWRP 3.6, or by patching boot.img and flashing the patched img through Fastboot?
And by using Magisk Stable v23 or Canary 23016?
Or you tried but you got a bootloop?
In that case again, which Magisk version and by which method (TWRP or patching & flashing)?
zgfg said:
Sorry, I don't understand. You did root Xiaomi.eu 22.1.5 by flashing Magisk through TWRP 3.6, or by patching boot.img and flashing the patched img through Fastboot?
And by using Magisk Stable v23 or Canary 23016?
Or you tried but you got a bootloop?
In that case again, which Magisk version and by which method (TWRP or patching & flashing)?
Click to expand...
Click to collapse
Patched boot.img, as mentioned using Stable/Beta and Canary.
testguest said:
Patched boot.img, as mentioned using Stable/Beta and Canary.
Click to expand...
Click to collapse
Sorry I have no renoir yet - hence I could not test myself (asking while waiting for the phone)
With previous Weekly MIUI 13/A12 you were able to install Magisk (or this is now the first MIUI 13/A12 Xiaomi.eu Weekly)?
I.e, wondering if problem with rooting started with MIUI 13 and A12
PS: I see now also MIUI 13 Stable for renoir: xiaomi.eu_multi_MI11Lite5G_V13.0.4.0.SKICNXM_v13-12-fastboot.zip
Downloads for : -Android- Generic Device/Other | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
MIUI 13 - MIUI 13 STABLE RELEASE
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
zgfg said:
[...]
Click to expand...
Click to collapse
The previous one (21.12.29) also was A12.
I think I won't go stable for now.