Is it possible to install twrp recovery and root using magisk in this phone or not possible because of mediatek processor?
Bhai have patience , this is Mediatek we all know but another thing to notice is This is MT- g95 SoC ?
Orange state in realme 7 when bootloader unlocked but unable to use fastboot.
I have unlocked my realme 7 bootloader with in-depth test built for realme 6 pro. It is working. But now after unlocking the phone factory resets itself and when trying to go into fastboot mode with ADB command ADB reboot bootloader the fastboot verify check fails all the time. So how to go into fastboot mode after bootloader unlock. This issue never happened when I start in-depth test after permissions. It's very strange that even after unlocking the phone is not booting into fastboot mode while giving error in verification. Guys can anyone knows how to solve this. Please reply asap.
Realme 7 After unlocking the bootloader is not going into fastboot mode again.
Can anyone tell when twrp for realme 7 wipp be available
I think i made a mistake by choosing mtk soc because it's hard chance to get twrp for mtk soc
Simple solution realme 7
Senxco said:
I have unlocked my realme 7 bootloader with in-depth test built for realme 6 pro. It is working. But now after unlocking the phone factory resets itself and when trying to go into fastboot mode with ADB command ADB reboot bootloader the fastboot verify check fails all the time. So how to go into fastboot mode after bootloader unlock. This issue never happened when I start in-depth test after permissions. It's very strange that even after unlocking the phone is not booting into fastboot mode while giving error in verification. Guys can anyone knows how to solve this. Please reply asap.
Click to expand...
Click to collapse
I think your adb driver not working please install adb driver reinstall and verfiy fails problem solve, thanks
No no adb driver is working and tested on other devices. I think the problem is with smartphone serial key ( It shows serial key mismatch and therefore fastboot unlock verify fail in fastboot mode).
To Root you phone:-
Download your device boot image > download magisk manager > patch your device boot image > go to fastboot mode > type in command >fastboot --disable-verity--disable-verification > flash vbmeta (fastboot flash vbmeta (put your vbmeta path here) > flash magisk patched image (fastboot flash boot (put your patched file path here) now reboot your phone it will be rooted if on First boot it didn't then reboot your device
Related
Hello
A newbie here ...
My new phone "Lenovo Vibe C (A2020)" does not allow me to install any kind of custom recovery on it, I tried the following methods ...
1- SP Flash Tool: doesn't detect my phone at all, even after installing all drivers (Qualcomm, MTK, Etc ,,, ).
2- Adb and fastboot: whenever I try to flash a recovery, it only shows (waiting for a device) command, even after being detected by "adb devices" command, and showing device ID.
3- flashing apps: I used flashify and thrasher, at the beginning they both show a successful flashing process, up until rebooting to recovery, then only shows "Lenovo" logo for a second right before turning the phone off.
that's what i did, any help would be appreciated.
Note: the phone isn't even indexed in the site's database ... I wonder why!
You should unlock the bootloader first after rooting your device
Hello there. I do hope that you can still boot your device normally. If you can, please do make a backup of your rom.
(a) Download and install the latest driver for your device
(b) Download the latest adb and fastboot tool (I recommend Minimal ADB and Fastboot)
(c) Download the custom recovery image. Save/copy it on the root directory of your ADB and Fastboot folder.
(d) In your device, go to settings > developer > enable oem unlocking and usb debugging (which is I guess you already did).
(e) Now open your terminal/cmd: adb reboot bootloader (this will boot your device in fastboot)
(f) In terminal/cmd: fastboot oem unlock (or fastboot oem unlock-go)
(g) Now flash the custom recovery: fastboot flash recovery "recovery.img"
***I suggest you try first if the custom recovery image works: fastboot boot recovery.img
(h) Reboot into recovery and check if it works.
Ospider said:
Hello
A newbie here ...
My new phone "Lenovo Vibe C (A2020)" does not allow me to install any kind of custom recovery on it, I tried the following methods ...
1- SP Flash Tool: doesn't detect my phone at all, even after installing all drivers (Qualcomm, MTK, Etc ,,, ).
2- Adb and fastboot: whenever I try to flash a recovery, it only shows (waiting for a device) command, even after being detected by "adb devices" command, and showing device ID.
3- flashing apps: I used flashify and thrasher, at the beginning they both show a successful flashing process, up until rebooting to recovery, then only shows "Lenovo" logo for a second right before turning the phone off.
that's what i did, any help would be appreciated.
Note: the phone isn't even indexed in the site's database ... I wonder why!
Click to expand...
Click to collapse
Check my thread for custom marshmallow rom and twrp recovery .
https://forum.xda-developers.com/android/general/bliss-rom-lenovo-vibe-c-a2020a40-t3567812
rolland.arriza said:
Hello there. I do hope that you can still boot your device normally. If you can, please do make a backup of your rom.
(a) Download and install the latest driver for your device
(b) Download the latest adb and fastboot tool (I recommend Minimal ADB and Fastboot)
(c) Download the custom recovery image. Save/copy it on the root directory of your ADB and Fastboot folder.
(d) In your device, go to settings > developer > enable oem unlocking and usb debugging (which is I guess you already did).
(e) Now open your terminal/cmd: adb reboot bootloader (this will boot your device in fastboot)
(f) In terminal/cmd: fastboot oem unlock (or fastboot oem unlock-go)
(g) Now flash the custom recovery: fastboot flash recovery "recovery.img"
***I suggest you try first if the custom recovery image works: fastboot boot recovery.img
(h) Reboot into recovery and check if it works.
Click to expand...
Click to collapse
But how about a person WITHOUT PC? Including me.
please some can you help with the porting of twrp for this phone
even some help with official firmware v217 then we can root with magiusk and recovery image
this phone has the mtk processor MT6765
Infinix hot 8 pliss, i can instal twrp
Yes, help sir ? :good:
Infinix Hot 8 Need Support
Please really need support for root and twrp for this device,, this device is really nice,,
guys again some try and get the firmware v217 so we can extract the boot.img for magisk
i hope a update is coming soon plan to get thta to find this boot.img
online the v174 firmware is not the same
OTA Update for Infinix
X650C-H626DE-P-191005V224.zip
240Mb
capture via usbdebugg
http://www.mediafire.com/file/24dmq3hk7wbu6b3/X650C-H626DE-P-191005V224.zip/file
Mtk(mediatek) processor devices are not supported by custom ROM developers. Don't expect custom rom support for hot infinix 8. Sorry.
Did anyone try Readback in SP Flash tool? So far, I have not been successful in doing so.
got it
To unlock Bootloaded withour error in Fastboot use command
fastboot flashing unlock
and then on the phone select volume up key to acknowledge
phone is booted into fresh android
and now rooted with magisk
thnx guys all done for now
off topic if you have a pihole on rasberry pie you can see that this phone is THE WORST i do mean UTTER DISREGUARD for user privacy and send EVERYTHING and i mean EVERTHING home to china
included is user app usage
user data
crash analytics
with root i will NOW TAKE CARE to THIS
any one needs boot.img modified for firmware 216 for magisk root will upload it
darylzero said:
phone is booted into fresh android
and now rooted with magisk
thnx guys all done for now
off topic if you have a pihole on rasberry pie you can see that this phone is THE WORST i do mean UTTER DISREGUARD for user privacy and send EVERYTHING and i mean EVERTHING home to china
included is user app usage
user data
crash analytics
with root i will NOW TAKE CARE to THIS
any one needs boot.img modified for firmware 216 for magisk root will upload it
Click to expand...
Click to collapse
Screenshots
and UPLOAD THE orignal+patched BOOT.img
With complete VERSION INFO
Sent from my Infinix-X650C using XDA Labs
Boot.img Magisk patched
https://www.mediafire.com/file/0nzyd8t9yu8vqpd/magisk_patched.img/file
Original Boot.img
http://www.mediafire.com/file/32gtumg9q6r46bi/boot.img/file
downloaded the uploaded firmware from google drive v236 i think
used techno tool to flash this to phone to VERIFY the firmwareis good and proper
once the firmware was verified and phone booted i uploaded the boot.img from that firmware v236 to magisk on phone and patched it
got this patched boot.img back to computer
now for the flashing part
install ADB drivers
on phone activate usb debug and oem unlock in developer mode in settings
check ADB is working and sees phone n computer via usb with command
"adb shell"
shouls show a valid response indicating phone is ADB ready
next get it into Fastboot mode with command
"adb reboot bootloader"
wait till phone reboots into fastboot mode check fastboot mode is active with this command
"fastboot devices"
now to unlock bootloader in fastboot else it will give error
use command
"fastboot flashing unlock "
this will also give a acknowledge on the phone that BOOTLOADER will now b unlocked and press volume up to agree
once bootloader is unlocked in fast boot next it to flash the magisk boot.img patched
i have uploaded this to medifire please download
place this file named
magisk_patched.img on desktop
use command boot
"fastboot flash boot (( need to drag and drop the file magisk_patched.img from desktop here ))"
wait till magic is done
after use to
"fastboot reboot "
after phone reboot it will b factory reset and rooted check root with magisk manager installed
root checked verified
https://www.mediafire.com/view/a2ivwbm530gdb9v/Screenshot_20191210-122733.png/file
Thank you very much.
My phone now has root access
Are you installed TWRP Recovery in your device.???
darylzero said:
Boot.img Magisk patched
https://www.mediafire.com/file/0nzyd8t9yu8vqpd/magisk_patched.img/file
Original Boot.img
http://www.mediafire.com/file/32gtumg9q6r46bi/boot.img/file
downloaded the uploaded firmware from google drive v236 i think
used techno tool to flash this to phone to VERIFY the firmwareis good and proper
once the firmware was verified and phone booted i uploaded the boot.img from that firmware v236 to magisk on phone and patched it
got this patched boot.img back to computer
now for the flashing part
install ADB drivers
on phone activate usb debug and oem unlock in developer mode in settings
check ADB is working and sees phone n computer via usb with command
"adb shell"
shouls show a valid response indicating phone is ADB ready
next get it into Fastboot mode with command
"adb reboot bootloader"
wait till phone reboots into fastboot mode check fastboot mode is active with this command
"fastboot devices"
now to unlock bootloader in fastboot else it will give error
use command
"fastboot flashing unlock "
this will also give a acknowledge on the phone that BOOTLOADER will now b unlocked and press volume up to agree
once bootloader is unlocked in fast boot next it to flash the magisk boot.img patched
i have uploaded this to medifire please download
place this file named
magisk_patched.img on desktop
use command boot
"fastboot flash boot (( need to drag and drop the file magisk_patched.img from desktop here ))"
wait till magic is done
after use to
"fastboot reboot "
after phone reboot it will b factory reset and rooted check root with magisk manager installed
root checked verified
https://www.mediafire.com/view/a2ivwbm530gdb9v/Screenshot_20191210-122733.png/file
Click to expand...
Click to collapse
Are you installed TWRP Recovery in your device.i want TWRP recovery.can I install TWRP recovery after root my device.tel me.
https://forum.xda-developers.com/android/help/infinix-hot-8-t3986799/post80598837
Check this Thread for complete guide on
* UNLOCKING-BOOTLOADER
* ROOTING
* TWRP
* OPTIMIZATION
* UN-BRICKING
* CUSTOM-ROM
Sent from my Infinix-X650C using XDA Labs
How can I root my infinix hot 8 v x650D
Misbahu said:
How can I root my infinix hot 8 v x650D
Click to expand...
Click to collapse
Same method as I stated above.. just use compatible TWRP
Sent from my Infinix-X650C using XDA Labs
darylzero said:
Boot.img Magisk patched
https://www.mediafire.com/file/0nzyd8t9yu8vqpd/magisk_patched.img/file
Original Boot.img
http://www.mediafire.com/file/32gtumg9q6r46bi/boot.img/file
downloaded the uploaded firmware from google drive v236 i think
used techno tool to flash this to phone to VERIFY the firmwareis good and proper
once the firmware was verified and phone booted i uploaded the boot.img from that firmware v236 to magisk on phone and patched it
got this patched boot.img back to computer
now for the flashing part
install ADB drivers
on phone activate usb debug and oem unlock in developer mode in settings
check ADB is working and sees phone n computer via usb with command
"adb shell"
shouls show a valid response indicating phone is ADB ready
next get it into Fastboot mode with command
"adb reboot bootloader"
wait till phone reboots into fastboot mode check fastboot mode is active with this command
"fastboot devices"
now to unlock bootloader in fastboot else it will give error
use command
"fastboot flashing unlock "
this will also give a acknowledge on the phone that BOOTLOADER will now b unlocked and press volume up to agree
once bootloader is unlocked in fast boot next it to flash the magisk boot.img patched
i have uploaded this to medifire please download
place this file named
magisk_patched.img on desktop
use command boot
"fastboot flash boot (( need to drag and drop the file magisk_patched.img from desktop here ))"
wait till magic is done
after use to
"fastboot reboot "
after phone reboot it will b factory reset and rooted check root with magisk manager installed
root checked verified
https://www.mediafire.com/view/a2ivwbm530gdb9v/Screenshot_20191210-122733.png/file
Click to expand...
Click to collapse
I have an Infinix Hot 8 X650B.
I am trying to root the device. I have installed all ADB required files and the drivers.
The computer detects the drivers and the device is showing in ADB Device list.
But it's not being listed in fastboot devices check, and no fastboot command is working.
Please what can I do?
Papichoolo said:
I have an Infinix Hot 8 X650B.
I am trying to root the device. I have installed all ADB required files and the drivers.
The computer detects the drivers and the device is showing in ADB Device list.
But it's not being listed in fastboot devices check, and no fastboot command is working.
Please what can I do?
Click to expand...
Click to collapse
Try Installing driver's on an different computer and check if it loads to fastboot.
Sent from my Infinix-X650C using XDA Labs
AshhRED said:
Try Installing driver's on an different computer and check if it loads to fastboot.
Sent from my Infinix-X650C using XDA Labs
Click to expand...
Click to collapse
I tried on a different PC with Windows 7, same issue. ADB Loads and detects, but fastboot doesn't.
It shows under ADB Devices but when I type, adb reboot bootloader.
The phone goes into fastboot mode, but isn't detected when using command, fastboot devices.
Drivers and eveything is setup correct on it too.
Have decided to root my phone with Adb and fastboot devices in Windows 10 and also installed drivers sucessfully and i can se my phone in cmd when i type fastboot devices.
Have unlock the bootloader in the phone and Enabled USB failure search in Advanced settings in developers mode.
When i loaded the Twrp file in cmd with adb i could copy and write the file to my fastboot device but when i reboot the phone into bootloader i se that download mode are disabled.
How can you unlock download mode ?
When i try to reboot into recovery mode i get the Android bot with a red triangle into it.
Im guessing that happens for i dont have download mode enabled and im wounder is the Twrp file on my phone or have that setting stopped this process?
My device is Realme 3 pro( RMX1851) running Realme ui ver. 1.0 - RMX1851_11_C.09
I have unlocked the bootloader of the device, but everytime I try to install twrp from the fastboot command
fastboot flash recovery twrp.img
it shows an error as-
fastboot-Write to device failed(unknown error)
what do I do now?
I have installed all drivers and the device is showing up when I hit the command -- fastboot devices
I can't flash TWRP and stuck in this step for a few days now....please help
[SOLUTION]
abhi2407singh said:
My device is Realme 3 pro( RMX1851) running Realme ui ver. 1.0 - RMX1851_11_C.09
I have unlocked the bootloader of the device, but everytime I try to install twrp from the fastboot command
fastboot flash recovery twrp.img
it shows an error as-
fastboot-Write to device failed(unknown error)
what do I do now?
I have installed all drivers and the device is showing up when I hit the command -- fastboot devices
I can't flash TWRP and stuck in this step for a few days now....please help
Click to expand...
Click to collapse
Hey there, I have found the solution to this problem. So anybody having this issue can follow this up.
The error occurs due to Windows (10) drivers incorrectly installed for the device. The solution is using a secondary phone via OTG with the app Bugjaeger (tutorials available on YouTube) to flash the TWRP image to your recovery partition. I searched this up but if no other way works for you (on PC), then you should definitely go for the provided solution.
THANKS!
can anyone pls help with how to root the Lenovo TB-x306f
i already unlocked the bootloader but that's as far as i was able to go with it.
i want to also like to install a recovery to flash the evolutionx rom if someone can pls help me and others that needs the same help.
GOD BLESS
I second that. There's nothing out there.
What I tried was to download the original ROM patch the boot.img with magical, replace in LMSA download folder and start a rescue. Didn't help. Got boot loop.
Ok, maybe a bit more details on what I tried already:
1. Enabled developer options. Good.
2. OEM unlocked. ADB connected. Good.
3. Boot to bootloader working. Good.
4. fastboot not listing the device after fastboot devices. Not good.
5. Googling around, found an universal root method with Magisk. Good.
6. Donwloaded, installed and ran RSA (Lenovo Rescue and Smart Assistant). Connected to device. Good.
7. Entered Rescue and using that downloaded the original ROM. Good.
C:\ProgramData\LMSA\Download\RomFiles\TB_X306F_S100134_210120_BMP
8. Copied boot.img to device, installed MagiskManager, patched image with magisk, downloaded the image to PC, replaced the original boot image with the patched one. Good.
9. Started the Rescue procedure in RSA. Rom flased. Good.
10. Bootloop. Bad.
No idea why would that not work, any help, pointers, ideas appreciated.
EDIT: There's a new ROM version now: TB_X306F_S100152_210205_BMP
For a preface, I have the same Tablet as OP. I tried to unlock the bootloader, following seemingly every guide out there but, no success so far. I've enabled debugging, activated OEM unlock and, adb detects my device but, after I send it to fastboot (adb reboot bootloader), no more commands work. I've updated the driver in Manager as one guide suggested but, still nothing.
I used command (fastboot OEM unlock) to continue but nothing. What am I doing wrong?
So just a tip for those that are looking for a guide to do a complete bootloader unlock for TB-X306F, there isn't one. I found a bunch of different ways to go about unlocking the bootloader from different Lenovo devices. First thing is that you need Minimal ABD Fastboot v1.4.3 if Platform Tools or LeTools doesn't work. Use CMD with admin rights, not PowerShell.
Everything else to unlock it is the same from all the guides out there. Make sure to use "fastboot flashing unlock" when unlocking instead of "fastboot oem unlock" or "fastboot oem unlock-go" if they dont work.
Second tip is for root when installing the Magisk patched boot image. While you're getting the boot.img, make sure to also grab the vbmeta.img from the ROM folder and place it in the Minimal ADB Fastboot folder where you will be using CMD. Do all the steps to get the patched boot image. Once you got the boot.img patched, enter fastboot then enter the command "fastboot --disable-verification flash vbmeta vbmeta.img" This will disable verification needed to boot correctly. After that, enter the command "fastboot flash boot <name of .img>" like normal to flash the patched boot.img from magisk. Then fastboot reboot.
This is what I did to get my TB-X306F unlocked and rooted. YMMV.
Different threads that I read to get to where I got, credit goes to them:
LENOVO Tab M10 Plus
After receiving my LENOVO Tab M10 Plus TB-X606F I tried to root my tablet. my Firmware version is TB-X606F_RF01_200103 - loaded the Lenovo Rescue and Smart Assistant (V5.0.0.25) - enabled OEM unlock - downloaded magisk - installed ADB now my...
forum.xda-developers.com
Lenovo M10 HD 2nd Gen X306F boot loop if boot.img is patched - android 10 · Issue #3832 · topjohnwu/Magisk
I recently installed magisk manager and extracted the boot.img from tb-x306f_rf01_200926 upon doing a fastboot flash boot magisk_patched.img , the machine goes into a boot loop. Am I doing somethin...
github.com
TWRP for LENOVO Tab M10 FHD - TB-X606F?
Hello, Possessing two tablets of this brand, I was wondering if a custom recovery existed for this one, I can look everywhere on all the forums, Russian, English, etc ... But, I do not find. If anyone can create one with this SOURCE CODE from...
forum.xda-developers.com
Lenovo tab m8
Hello, Any root and custom ROM available for the Lenovo tab m8 tb8505 variant? The stock rom feels good for the price but if something better to make the tab feel nicer.. Thanks :) :)
forum.xda-developers.com
By any chance can u pls.... Make a video on the steps u explained including on where to get that file needed. Pls thank u and GOD BLESS YOU. If u can find the time to do it .
I apologize for asking for so much help on this.
I too would very much care to see a video of the process but, I have no problem trying it first hand to myself. This tablet is just weird. It can be detected but, as soon as I boot into fastboot, it can't pick it up anymore even though, I had grabbed all of the recommended tools so far such as the fast Boot and the bundle.
A detailed guide would be good enough too
Following @doink_doink 's post (and some bootloops after...) I finally managed to root my Lenovo M10 HD 2 gen (TB-X306X) with magisk. I'll attempt to write a simple guide for who's still interested with rooting this kind of devices since there's not much literature online.
Rooting Lenovo M10 X306X (should also work for other models)
I am by no means held responsible for eventual damage you can inflict on your device, follow the underlying steps of your own accord.
Desktop Tools:
Minimal ADB and Fastboot
Lenovo Rescue Smart Assistant (LRSA from now on)
MTK (Mediatek) Preload Drivers (If your device isn't listed in fastboot)
Mobile Tools:
Magisk Manager App
Steps:
1 - From LRSA click on "Rescue" Tab
2 - Select the model of your tablet and then download
3 - From "Downloads" in the top right corner of the LRSA, click on "Open" to go into the LRSA download folder
4 - Connect your device and set it into USB Debugging and File Transfer
5 - Copy boot.img from LRSA download folder into the device's download folder
6 - Run Magisk Manager App on your device
7 - From Magisk Manager App choose "Install" on the right side of Magisk
8 - Choose the only option "Select and patch a file"
9 - Choose the boot.img you previously copied into the device's download folder
10 - Copy the new file "patched_boot.img" or similar name to the folder where Minimal ADB and Fastboot was installed
11 - Copy the file vbmeta.img from LRSA download folder to Minimal ADB and Fastboot folder
12 - From your device's settings enable developer options and enable OEM Unlock
13 - Execute a cmd session with administrator privileges
14 - Execute in the cmd: adb reboot bootloader (if everything went right the device should reboot in fastboot mode)
15 - Execute in the cmd: fastboot flashing unlock
16 - Execute in the cmd: fastboot --disable-verification flash vbmeta vbmeta.img
17 - Execute in the cmd: fastboot flash boot patched_boot.img
18 - Execute in the cmd: fastboot reboot
The device should correctly reboot and everything should be good to go now.
If something bad happens, like a bootloop or something, turn off the device and use the LRSA to rescue your device.
I don't get around to checking my email as often as I used to so I just now got around to seeing this but, I will try this after I get home from work in 10 hours plus time. If I can get this to successfully work, I will be flat out amazed. I had gotten to the point where I had just given up any and all hope that I would get it to work.
Show
Chairos said:
Following @doink_doink 's post (and some bootloops after...) I finally managed to root my Lenovo M10 HD 2 gen (TB-X306X) with magisk. I'll attempt to write a simple guide for who's still interested with rooting this kind of devices since there's not much literature online.
Rooting Lenovo M10 X306X (should also work for other models)
I am by no means held responsible for eventual damage you can inflict on your device, follow the underlying steps of your own accord.
Desktop Tools:
Minimal ADB and Fastboot
Lenovo Rescue Smart Assistant (LRSA from now on)
MTK (Mediatek) Preload Drivers (If your device isn't listed in fastboot)
Mobile Tools:
Magisk Manager App
Steps:
1 - From LRSA click on "Rescue" Tab
2 - Select the model of your tablet and then download
3 - From "Downloads" in the top right corner of the LRSA, click on "Open" to go into the LRSA download folder
4 - Connect your device and set it into USB Debugging and File Transfer
5 - Copy boot.img from LRSA download folder into the device's download folder
6 - Run Magisk Manager App on your device
7 - From Magisk Manager App choose "Install" on the right side of Magisk
8 - Choose the only option "Select and patch a file"
9 - Choose the boot.img you previously copied into the device's download folder
10 - Copy the new file "patched_boot.img" or similar name to the folder where Minimal ADB and Fastboot was installed
11 - Copy the file vbmeta.img from LRSA download folder to Minimal ADB and Fastboot folder
12 - From your device's settings enable developer options and enable OEM Unlock
13 - Execute a cmd session with administrator privileges
14 - Execute in the cmd: adb reboot bootloader (if everything went right the device should reboot in fastboot mode)
15 - Execute in the cmd: fastboot flashing unlock
16 - Execute in the cmd: fastboot --disable-verification flash vbmeta vbmeta.img
17 - Execute in the cmd: fastboot flash boot patched_boot.img
18 - Execute in the cmd: fastboot reboot
The device should correctly reboot and everything should be good to go now.
If something bad happens, like a bootloop or something, turn off the device and use the LRSA to rescue your device.
Click to expand...
Click to collapse
Hi I have the same device I have my patched boot.img and vbmeta.img but when I adb reboot bootloader fastboot commands don't work anymore fastboot flashing unlock says <waiting for device> and every other command. I have latest fastboot drivers google USB drivers I've done everything I have no hope please reply and help me
Hello231 said:
Show
Hi I have the same device I have my patched boot.img and vbmeta.img but when I adb reboot bootloader fastboot commands don't work anymore fastboot flashing unlock says <waiting for device> and every other command. I have latest fastboot drivers google USB drivers I've done everything I have no hope please reply and help me
Click to expand...
Click to collapse
* I have the TB-X306F***
Hello231 said:
Show
Hi I have the same device I have my patched boot.img and vbmeta.img but when I adb reboot bootloader fastboot commands don't work anymore fastboot flashing unlock says <waiting for device> and every other command. I have latest fastboot drivers google USB drivers I've done everything I have no hope please reply and help me
Click to expand...
Click to collapse
I'm currently experiencing the same issue. I have done everything, followed every step provided by Chairos and it wont surpass beyond the <Waiting for device> message. I just got this device today for a fair price, hoping I could root the device, and typical me forgot to research if it was officially compatible with TWRP.
cratee said:
I'm currently experiencing the same issue. I have done everything, followed every step provided by Chairos and it wont surpass beyond the <Waiting for device> message. I just got this device today for a fair price, hoping I could root the device, and typical me forgot to research if it was officially compatible with TWRP.
Click to expand...
Click to collapse
I got it for free for online classes but that's not the problem twrp is out for this device unofficialy but many say that it works, anyways good luck on u mate I gave up on rooting this device I can't do it anymore I've been trying for 4 months but nothing still if I had the Chance and the correct guide I would definitely do it
cratee said:
I'm currently experiencing the same issue. I have done everything, followed every step provided by Chairos and it wont surpass beyond the <Waiting for device> message. I just got this device today for a fair price, hoping I could root the device, and typical me forgot to research if it was officially compatible with TWRP.
Click to expand...
Click to collapse
Make sure you have the latest MTK usb drivers.
Hello Everyone,
I apologize for the delay but I didn't get notified of your replies.
I also got the waiting for device problem, but as @Yahoo Mike says, it's the MTK USB drivers that are used to communicate with the device in fastboot mode. Latest drivers should do.
Let me know if you're still experiencing the problem after installing the latest MTK drivers, since it depends on which motherboard the tablet has but all models should use mediatek.
Worked like a charm! Thanks.
Can anyone please confirm if there is a TWRP even unofficial IMG out there? And if any kind soul could share the file too I would be so grateful thanks
worked beautifully ...
just the installation of the latest MTK drivers is not very typical. however, you can follow this guide to install MTKL drivers and disable the driver signature enforcement
Download MTK USB Drivers for Windows 11, 10 - Driver Easy
To flash files to your MediaTek chipset phones, you need to have the latest MediaTek drivers installed. We'll show you how to install the MTK driver easily.
www.drivereasy.com
When you Restart: go to Advanced Options to find the Driver Signature Disablement option
I received yesterday my TB-X306X, with Android 10 and with software version S100184_210325_BMP. First thing to do was to unlock and root the tablet, without any issue, thanks to clear indications found on this thread.
Has anybody been able to find working TWRP for this tablet ?