Please use LineageOS from gardiol: https://gardiol.org/surya/microg
Thanks for the ROM!
For me everything works, but adb not. I allways get
Code:
# ./adb devices
List of devices attached
<number> unauthorized
On the phone there is no dialog for authorization.
And SELinux is not enforced...
best regards
The Rom works at 120Hz or 60Hz?
Is there any way to change the refresh rate?
Cephalophinae said:
Thanks for the ROM!
For me everything works, but adb not. I allways get
Code:
# ./adb devices
List of devices attached
<number> unauthorized
On the phone there is no dialog for authorization.
And SELinux is not enforced...
best regards
Click to expand...
Click to collapse
enable developer options and enable Debugging USB
Yolomean12 said:
The Rom works at 120Hz or 60Hz?
Is there any way to change the refresh rate?
Click to expand...
Click to collapse
Yes, you can change the refresh rate. Just installed the rom. Options are 60, 90 and 120hz.
Its under Display and then Device-specific settings, from there you can change the refresh rate!
aznd said:
Yes, you can change the refresh rate. Just installed the rom. Options are 60, 90 and 120hz.
Its under Display and then Device-specific settings, from there you can change the refresh rate!
Click to expand...
Click to collapse
Thanks, I'm going to install it when the 167 hours lapse for unlock my bootloader ends
Cephalophinae said:
Thanks for the ROM!
For me everything works, but adb not. I allways get
Code:
# ./adb devices
List of devices attached
<number> unauthorized
On the phone there is no dialog for authorization.
And SELinux is not enforced...
best regards
Click to expand...
Click to collapse
Try out the new build (07.11.2020), it should work now.
And by the way, I'm new to building LineageOS, so I have no idea how to fix SELinux and FMRadio. If anyone can help me my Discord is Ungeskriptet#6900
Does this rom have the call recorder in the dialer?
So this is the no-google version of Lineage? Great news!
EDIT: BTW - The other version of Lineage for this devices seems to have problems with the APN. Does mobile data work on this ROM without problems?
Ungeskriptet said:
Try out the new build (07.11.2020), it should work now.
And by the way, I'm new to building LineageOS, so I have no idea how to fix SELinux and FMRadio. If anyone can help me my Discord is Ungeskriptet#6900
Click to expand...
Click to collapse
I can confirm, that adb is working with build 07.11.2020. Thanks a lot!
Now "only" SELinux and FMRadio has to be fixed.
Cephalophinae said:
I can confirm, that adb is working with build 07.11.2020. Thanks a lot!
Now "only" SELinux and FMRadio has to be fixed.
Click to expand...
Click to collapse
What about SOT? It is better as google stuff will not dry it out with sync and other 'unknown' underground actions?
Blechpirat said:
So this is the no-google version of Lineage? Great news!
EDIT: BTW - The other version of Lineage for this devices seems to have problems with the APN. Does mobile data work on this ROM without problems?
Click to expand...
Click to collapse
Mobile data works as it should.
Cephalophinae said:
Now "only" SELinux and FMRadio has to be fixed.
Click to expand...
Click to collapse
And I'll give it a go once they are.
Where do I find a compatible version of magisk? Is https://magisk.me/zip/ fine, or do I need a special build?
---------- Post added at 04:35 PM ---------- Previous post was at 03:49 PM ----------
Also, after installing Lineage, I tried to get packages for f-droid. That wouldn't work until I went into Settings/Apps and allowed the app to write to disk. It never asked for the permission.
Blechpirat said:
Where do I find a compatible version of magisk? Is https://magisk.me/zip/ fine, or do I need a special build?
---------- Post added at 04:35 PM ---------- Previous post was at 03:49 PM ----------
Also, after installing Lineage, I tried to get packages for f-droid. That wouldn't work until I went into Settings/Apps and allowed the app to write to disk. It never asked for the permission.
Click to expand...
Click to collapse
I think that one is ok...if is not, you can try 21.1 beta version....you can find it just searching on net (seems I can not post external links on here)
OP, Great Job. Thanks
Magisk from the link I posted worked just fine, but it wasn't the current version. The app updated both just fine.
@Ungeskriptet - do you plan to make this build offical? I love it, it runs just fine, I'm very happy with it. And now of course I hope that this build will get updates!
Is it only for microg or can it be used for opengapps too?
Blechpirat said:
@Ungeskriptet - do you plan to make this build offical? I love it, it runs just fine, I'm very happy with it. And now of course I hope that this build will get updates!
Click to expand...
Click to collapse
No I won't make it official. I'm just a 14 year old kid who found out how to build LineageOS and also there are some bugs which I don't know how to fix
Related
I just can't wait for Google to upload an official Nougat image for our beloved Shamu, so I compiled this from the source.
V4 Flashable ZIP: https://mega.nz/#!qkpBHQwY!9fWIu36NCDtP4NXnTnWE_FblWlk9vrwNtDE13eJbocA
Obligatory screenshots: https://imgur.com/a/cXrnH
Working
As Shamu is a supported device, most things work well here:
Booting
Cellular (Calling, SMS and data)
Audio
Wi-Fi
Bluetooth
GApps (see below)
Easter egg
Not working (?)
Not working on Verizon, as reported here
There are probably more
GApps
This build has dm-verity enabled. With the stock kernel, GApps will not show up, or a warning is displayed when booting. To solve this, either use a custom kernel or use FED-Patcher.
After installing OpenGApps, you may encounter force closes during the Setup Wizard.
replica102 said:
You can just skip setup without editing the build.prop. Just tap on the four corners of the screen, starting from top left, clockwise. Do it right, and you'll get sent to home screen.
Click to expand...
Click to collapse
Afterwards, to get rid of the Play Services force closes, go to Settings > Apps > Three dot menu > Show system and find Google Play Services. Enter the Permissions menu and grant all the permission it needs.
If apps requiring WebView force close, try excluding "WebviewGoogle" using the gapps-config config file. Details are available here.
Sources
This build was compiled on a modified tree. See the changelog for details.
Vendor blobs are downloaded from https://developers.google.com/android/nexus/blobs-preview
Changelog
Code:
V4 - NRD90U - That's what I call "Useless"
Flashable ZIP: [url]https://mega.nz/#!qkpBHQwY!9fWIu36NCDtP4NXnTnWE_FblWlk9vrwNtDE13eJbocA[/url]
- Updated to 7.0.0_r6/NRD90U. So you want the shiny new build number? Here you go!
V3 - NRD90S
Flashable ZIP: [url]https://mega.nz/#!35Zl0QyY!gUYM79Fs_I6tm2RdEJw1v5S30qQqJ2RA1B3EosKlSqk[/url]
- Updated to 7.0.0_r4/NRD90S, with September's security updates.
V2 - NRD90M - A proper build... and more!
Flashable ZIP: [url]https://mega.nz/#!f4wSnTDL!3ifsV_qC_r-MJ-y45yDcwemkgTGY_jTr_OObHRktC-M[/url]
- The product name is now "Nexus 6" instead of the default "AOSP on Shamu". The modified device tree is available [URL="https://github.com/zhaofengli/device_moto_shamu"]here[/URL].
- The navigation bar editor is now accessible in System UI tuner. This is done by reverting [URL="https://android.googlesource.com/platform/frameworks/base/+/72195a011128d1c516149763c4c156539a470ed5"]this commit[/URL].
- I found out that I checked out the master branch for a handful of repositories when playing around. This is now fixed.
- This build was compiled with external/icu at [URL="https://android.googlesource.com/platform/external/icu/+/683055d9b50491dedbadea4e8ffb484e99e4f52b"]683055d[/URL] (the current master). This is to get RIL working.
- Developers: See [URL="http://forum.xda-developers.com/showpost.php?p=68556855&postcount=10"]this post[/URL] for a full explanation of the solution to get RIL working on 7.0.0_r1.
V1 - Initial build
Note: On a closer look, this is actually not a proper 7.0.0_r1 build. You should download V2 instead for a smoother experience.
Flashable ZIP: [url]https://mega.nz/#!K9YwGCJK!ezU_1dYTAOcCERletT-wK4demwI0-ZLRYiN4wrcXZLY[/url]
Mods: Please move this thread to the appropriate section if required.
Where did you get blobs from?
Kernel source?
Well done on being the first XD
neobuddy89 said:
Where did you get blobs from?
Kernel source?
Click to expand...
Click to collapse
Blobs are from https://developers.google.com/android/nexus/blobs-preview
And as said, I haven't changed the source in any way. Kernel source is available at https://android.googlesource.com/device/moto/shamu-kernel/+/android-7.0.0_r1
Edit: Wow, didn't look too closely. That's the prebuilt kernel, and the corresponding source hasn't been uploaded yet.
Zhaofeng Li said:
I just can't wait for Google to upload an official Nougat image for our beloved Shamu, so I compiled this from the 7.0.0_r1 source. I can't take any credit for it, as this is built using the built-in build target, and nothing more.
https://mega<dot>nz/#!K9YwGCJK!ezU_1dYTAOcCERletT-wK4demwI0-ZLRYiN4wrcXZLY
Mods: Please move this thread to the appropriate section if required. I don't have permission to post in the development sections yet.
Obligatory screenshots: https://imgur<dot>com/a/cXrnH
Edit: Added screenshot link
Click to expand...
Click to collapse
The mega link don't work.
serch826 said:
The mega link don't work.
Click to expand...
Click to collapse
Yes it does, you have to copy and paste but remove the <dot>
---------- Post added at 06:20 AM ---------- Previous post was at 06:11 AM ----------
Real question is, is this installed through factory recovery or can it be used through TWRP... Deff just tried TWRP and no success. will try flashing back to normal.
Twiggy000b said:
Yes it does, you have to copy and paste but remove the <dot>
---------- Post added at 06:20 AM ---------- Previous post was at 06:11 AM ----------
Real question is, is this installed through factory recovery or can it be used through TWRP... Deff just tried TWRP and no success. will try flashing back to normal.
Click to expand...
Click to collapse
I removed the <dot> but it doesn't work.
serch826 said:
Real question is, is this installed through factory recovery or can it be used through TWRP... Deff just tried TWRP and no success. will try flashing back to normal.
Click to expand...
Click to collapse
Installing via TWRP will show a couple of warnings about the missing "log" function, but should still succeed nevertheless.
Zhaofeng Li said:
I just can't wait for Google to upload an official Nougat image for our beloved Shamu, so I compiled this from the 7.0.0_r1 source. I can't take any credit for it, as this is built using the built-in build target, and nothing more.
https://mega<dot>nz/#!K9YwGCJK!ezU_1dYTAOcCERletT-wK4demwI0-ZLRYiN4wrcXZLY
Mods: Please move this thread to the appropriate section if required. I don't have permission to post in the development sections yet.
Obligatory screenshots: https://imgur<dot>com/a/cXrnH
Edit: Added screenshot link
Click to expand...
Click to collapse
looks like mega is having server issues... i got it though
---------- Post added at 06:28 AM ---------- Previous post was at 06:25 AM ----------
Zhaofeng Li said:
Installing via TWRP will show a couple of warnings about the missing "log" function, but should still succeed nevertheless.
Click to expand...
Click to collapse
the log shown was simulating actions and then went to success. let me try again
Twiggy000b said:
looks like mega is having server issues... i got it though
Click to expand...
Click to collapse
Thanx mate!
cerico76 said:
I removed the <dot> but it doesn't work.
Click to expand...
Click to collapse
i retract my last response lol, you also gotta put a "." between mega and nz lol mega is alive!
Thanks, will download and try asap!
EDIT: i guess it will encrypt the device?
Zhaofeng Li said:
I just can't wait for Google to upload an official Nougat image for our beloved Shamu, so I compiled this from the 7.0.0_r1 source. I can't take any credit for it, as this is built using the built-in build target, and nothing more.
https://mega<dot>nz/#!K9YwGCJK!ezU_1dYTAOcCERletT-wK4demwI0-ZLRYiN4wrcXZLY
Mods: Please move this thread to the appropriate section if required. I don't have permission to post in the development sections yet.
Obligatory screenshots: https://imgur<dot>com/a/cXrnH
Edit: Added screenshot link
Click to expand...
Click to collapse
Just curious why you're calling it "useless"?
Have you tested it at all, and if so, what works and what doesn't work?
Iirc, at the very minimum, you need to symlink vendor to system to get cellular connectivity working.
*edit*
Here is more info regarding the need for symlinking:
https://groups.google.com/forum/#!topic/android-building/Lru4hX8JOnc
https://github.com/CyanogenMod/android_build/commit/47aaaa704a56f37889a8b54498fbb7daf9a6de30
https://github.com/CyanogenMod/andr...ff93604#diff-78ec901c9c29ef6a20b79592fd93f941
Q9Nap said:
Just curious why you're calling it "useless"?
Have you tested it at all, and if so, what works and what doesn't work?
Iirc, at the very minimum, you need to symlink vendor to system to get cellular connectivity working.
*edit*
Here is more info regarding the need for symlinking:
https://groups.google.com/forum/#!topic/android-building/Lru4hX8JOnc
https://github.com/CyanogenMod/android_build/commit/47aaaa704a56f37889a8b54498fbb7daf9a6de30
https://github.com/CyanogenMod/andr...ff93604#diff-78ec901c9c29ef6a20b79592fd93f941
Click to expand...
Click to collapse
Thank you. Cellular connectivity is working, and the vendor blobs are present in the build. The exclamation mark on the screenshots are due to Google servers being blocked in China (which you can fix by changing the captive_portal_server global setting, in case if you are in the affected regions).
The reason I call it "useless" is that Google will likely get the official images out very soon, and this build will quickly become obsolete.
I will update the original post to include the test results.
Noob Question:
Where can I get the GApps file for this build?
Thanks!
edwaine said:
Noob Question:
Where can I get the GApps file for this build?
Thanks!
Click to expand...
Click to collapse
Use open gapps
Sent from my Nexus 6 using Tapatalk
Maybe my question got ovelooked because of an edited post but:
does the kernel force encrypt?
Thanks a lot!
Droidphilev said:
Maybe my question got ovelooked because of an edited post but:
does the kernel force encrypt?
Thanks a lot!
Click to expand...
Click to collapse
In twrp I wiped everything except internal storage. flasked. still have my files. So, no it does not force encrypt. Your welcome.
Zhaofeng Li said:
Thank you. Cellular connectivity is working, and the vendor blobs are present in the build. The exclamation mark on the screenshots are due to Google servers being blocked in China (which you can fix by changing the captive_portal_server global setting, in case if you are in the affected regions).
The reason I call it "useless" is that Google will likely get the official images out very soon, and this build will quickly become obsolete.
I will update the original post to include the test results.
Click to expand...
Click to collapse
So.. this probably force encrypts device, right?
Droidphilev said:
Maybe my question got ovelooked because of an edited post but:
does the kernel force encrypt?
Thanks a lot!
Click to expand...
Click to collapse
harpin14789 said:
So.. this probably force encrypts device, right?
Click to expand...
Click to collapse
Flash this after flashing the rom zip and you don't have to worry about it:
http://forum.xda-developers.com/and...-fed-patcher-v8-forceencrypt-disable-t3234422
Hi,
Here is a build of LineageOS 13 for those who wants to test it.
By installing this ROM, you accept that you may brick your phone.
I am in no way responsible for it.
I will not maintain it regularly or at all. You can always report bugs with logs, that could help jts2111.
Thanks to TeamSuperluminal and Corvus.
Known bugs:
- EAP/SIM (wifi) not working
INSTALLATION:
- Use TWRP
DOWNLOAD LINK:
https://mega.nz/#!P5pHATjb!Oqk1M50421BIXQiUuKCXXVZ6NXmMxdrrCsUcsuqRUAQ
GApps (banks dynamic):
https://mega.nz/#!G4Aw2aRb!MjqhQe8Vcfq2H0XwHEtARvrGpvIq9qB4_4vydbR3FD4
Will a dirty flash over a CM13 (Villarleg) work?
chako67 said:
Hi,
Here is a build of LineageOS 13 for those who wants to test it.
By installing this ROM, you accept that you may brick your phone.
I am in no way responsible for it.
I will not maintain it regularly or at all. You can always report bugs with logs, that could help jts2111.
Thanks to TeamSuperluminal and Corvus.
Known bugs:
- EAP/SIM (wifi) not working
INSTALLATION:
- Use TWRP
DOWNLOAD LINK:
https://mega.nz/#!P5pHATjb!Oqk1M50421BIXQiUuKCXXVZ6NXmMxdrrCsUcsuqRUAQ
GApps (banks dynamic):
https://mega.nz/#!G4Aw2aRb!MjqhQe8Vcfq2H0XwHEtARvrGpvIq9qB4_4vydbR3FD4
Click to expand...
Click to collapse
Awesome and Thank you heaps
- EAP/SIM (wifi) not working - What does this mean bro?
no wifi?
saraprobe said:
Awesome and Thank you heaps
- EAP/SIM (wifi) not working - What does this mean bro?
no wifi?
Click to expand...
Click to collapse
Wifi is working but not with EAP/SIM security scheme
flotux said:
Will a dirty flash over a CM13 (Villarleg) work?
Click to expand...
Click to collapse
I have not tested, but should work. Try and let us know.
do you have screenshot ?
fingerprint work ?
ajegile said:
do you have screenshot ?
fingerprint work ?
Click to expand...
Click to collapse
no need for a screenshot its CM13 with a new name and yes FP works
If you want me to fix anything in my build, post some logs. I'll look into it.
I flashed this rom today , first lock
sim 1 signal not good for 4G my network band 3 . i chose global net from sim setting but signal unstable .
is anyone face same problem ?
Sent from my LEX720 using Tapatalk
Testing myself. WiFi functional on x727 with everything fine. Fairly stable. Cell data is working if you select LTE/GSM/WCDMA (or something like that). For my build, I'm trying to update the security patch.
Been running it for a few hours. Great so far. I haven't had any problems and it's very very smooth. My favorite test is going into maps and holding down the map and dragging around real fast. Usually always get some micro-stutter/fps drops but damn, this one's staying butter smooth!
benjmiester said:
Been running it for a few hours. Great so far. I haven't had any problems and it's very very smooth. My favorite test is going into maps and holding down the map and dragging around real fast. Usually always get some micro-stutter/fps drops but damn, this one's staying butter smooth!
Click to expand...
Click to collapse
Im on turbo rom but this makes me want to download it now.
Very Smooth for Test Build.
No bugs so far.
Thanks for bringing Lineage OS to Le Pro 3.
flotux said:
Will a dirty flash over a CM13 (Villarleg) work?
Click to expand...
Click to collapse
It might or better said, should work. But of course it´s not recommended.
DJ-Tumor said:
It might or better said, should work. But of course it´s not recommended.
Click to expand...
Click to collapse
I've tested it now and it worked without problems so far. Before I used the ResurrectionRemix (CM13) from by VillarLeg. I had license issues with payed apps and also after each dirty flash Google apps crashed. I then had to reinstall the apps from the play store. Google Home (chromecast) even did not start.
With your LineageOS test build I didn't noticed any problems so far. It runs stable and smoothly.
Is there a chance that we get a version with the January security patches incorporated?
Thanks for the good work!
Ir works?
---------- Post added at 01:48 PM ---------- Previous post was at 01:47 PM ----------
Lineage 14.1?
I do not have the original IR app. If you provide the apk I could test it with this build.
Button konfiguration does not work for me?
Some to confirm?
for example....I´d like to make left button "Menu-Button".
Usage does not change after settings changed....still is recents button.
Just for info...
Device tree:
https://github.com/LineageOS/android_device_leeco_zl1
Kernel:
https://github.com/LineageOS/android_kernel_leeco_msm8996
Code review:
https://review.lineageos.org/
In the device tree only X727 is listed. Will any upcoming ROM also support X720?
flotux said:
In the device tree only X727 is listed. Will any upcoming ROM also support X720?
Click to expand...
Click to collapse
All the 727 roms will work on 720, unless the builder bundles a radio (which is considered bad practice for roms). The specs on that page are all messed up too. Flash on your 720 with confidence.
Hi guys,
as LineageOS 15.1 is just around the corner and I had a few spare CPU cycles, here's the current build which I did as a 'code of honor'-member. Just flash with TWRP as usual, add gapps (stock are too big) and optionally root.
Watch out as the whole rom might still lack a few features.
Sources are on https://github.com/LineageOS
Credits to anyone who worked on them including intel for their buggy CPUs enabling me to build.
Build date: 2018-03-02
Download: https://go.stargazer.at/bacon
FAQs.:
Q: What patches did you include?
A: None. Pure LineageOS as it would come from the build server
Q: So this IS the official LineageOS rom?
A: In theory it's the same thing, but I am NOT a linageos developer
Q: What Gapps package did you use?
A: Nano. Stock is too big as it wouldn't fit on /system
Q: Support?
A: None officially. But ask - maybe someone has an idea.
Q: What works?
A: Phone rings, I'm able to answer and do calls, BT works, Wifi... annoying texts already arriving. I assume it's working.
Q: Bugs?
A: You tell.
Q: Is it complete?
A: I doubt it. Some translations are still missing. Keep in mind it's an early version of lineageOS
Q: Why did you build it?
A: Because I did not want to wait for the official release and live on the edge.
Q: Why does a girl build roms?
A: Short answer: because I can.
is the camera working? apparently that is the reason why the official build have been delayed
borzowsky said:
is the camera working? apparently that is the reason why the official build have been delayed
Click to expand...
Click to collapse
Honestly, I did not check yet as camera is not one of my basic needs. Will do so as soon as I get home.
If it does not work yet, I do not intend to fix too much stuff as I want to stay on the official sources. If there's a patch to cherrypick from gerrit, it's something we may talk about.
Camera does not work yet, but as far as I can see there are a few things in review to be submitted. Stay tuned as I will be building the rom again as soon as those changes are merged. In the meanwhile I may do some tinkering on my local build.
References:
https://review.lineageos.org/c/206914/
Long live bacon
cb5264 said:
Camera does not work yet...
Click to expand...
Click to collapse
I noticed that your build has SELinux enforcing but this may be why the camera isn't working; something that still needs fixing.
cb5264 said:
Camera does not work yet, but as far as I can see there are a few things in review to be submitted. Stay tuned as I will be building the rom again as soon as those changes are merged. In the meanwhile I may do some tinkering on my local build.
References:
https://review.lineageos.org/c/206914/
Click to expand...
Click to collapse
I've been keeping tabs on this every day and no one has touched it for weeks [emoji24] hopefully they just have code they're working on offline and just have to upload it and merge. Waiting is killing me though. Good to know it's getting close but probably will still wait since I'll probably do a full wipe once it's ready and don't want to do it twice.
Sent from my Nexus 7 using Tapatalk
remedya said:
I noticed that your build has SELinux enforcing but this may be why the camera isn't working; something that still needs fixing.
Click to expand...
Click to collapse
I doubt that it's SELinux. Looking at the logcat the problem root seems to be the HAL and that we should use the CAF stack. Besides that some clocks seem to be out of sync (mainly front camera). If it would be SELinux, logcat/dmesg would show.
Download doesnt work
I will fix it as I compile the next version.
cb5264 said:
Camera does not work yet, but as far as I can see there are a few things in review to be submitted. Stay tuned as I will be building the rom again as soon as those changes are merged. In the meanwhile I may do some tinkering on my local build.
References:
https://review.lineageos.org/c/206914/
Click to expand...
Click to collapse
Some changes on 19 March.
Download link fixed btw
remedya said:
Some changes on 19 March.
Click to expand...
Click to collapse
Are these the changes needed to fulfill the LineageOS Device Support Requirement/camera recorder?
cb5264 said:
Download link fixed btw
Click to expand...
Click to collapse
Error 7
---------- Post added at 08:37 PM ---------- Previous post was at 08:19 PM ----------
Lol and now the download link is gone. Just stop. Wait for the official there is clearly a reason why its not been officially released yet.
First look at Build 2003 is really fine. Thanks for your hard work, Lady
Cam seems "two steps from hell" ...
https://review.lineageos.org/#/q/project:LineageOS/android_device_oneplus_bacon
interesting enough ?
The_Voice_70 said:
First look at Build 2003 is really fine. Thanks for your hard work, Lady
Cam seems "two steps from hell" ...
https://review.lineageos.org/#/q/project:LineageOS/android_device_oneplus_bacon
interesting enough ?
Click to expand...
Click to collapse
You had no problems flashing?
It's happening!
Sent from my A0001 using Tapatalk
TbagBaggins said:
You had no problems flashing?
Click to expand...
Click to collapse
Nope. No Problems.
The_Voice_70 said:
Nope. No Problems.
Click to expand...
Click to collapse
Im getting error 7. No other rom gives me error 7. Download link works on and off have tried installing twice same error.
Use latest official TWRP 3.2.1.0. No Problems with it. Error 7 seams to be old Recovery.
SYRIANA_PIE ANDROID 9.0
WHAT IS SYRIANA_PIE?
it`s asop based on phh_treble_arm64_ab v104 including Gapps, Magisk 17.1 and all the fixes to get treble android pie more stable , tweaked ,moded,clean and mix asop without any extras
Download link:
Syriana_Pie V1.0
Notice1:
Dont use Developer settings - then MTP will be buggy.
to get Enhanced 4G LTE Mode install ims.apk (( should fix VOLTE as well "not tested cuz my sims not soppurted" ))
INSTALLATION
required :
1- unlocked bootloader
2- ADB and fastboot
3- enable usb debugging in developer settings.
4- clean flash (( formate data))
5- use those commands
Code:
adb shell
Code:
reboot bootloader
now we flash it
Code:
fastboot flash system Syriana_pie_v1.0.img
then
Code:
fastboot reboot
What Is Working In Syriana_Pie ?
everthing working as a charm except hotspot (still working on it )
this rom tested on Nokia6.1 Nokia8 Nokia7plus and Upro
working on A/B devices only
Changelog
Code:
-fixed MTP
-Fixed NFC
-fixed gcam and stock pie cam
-fixed dark mode
-Adaptive brightness and Ambient display
-magisk v17.1 with latest version of magisk manager
-Pixel launcher and Quick step Launcher with swip up on home button gesture
-tweaked for better internet speed,performance,gaming,and battery life
-updated all gapps
-and alot more
- 100%Stable for daily use.
Special Thanks goes to:
phhusson for his great job and Open Source Code
Contributors
Maherabed1986
ROM OS Version: 9.x Pie
ROM Kernel: Linux4.4
Based On: AOSP
Version Information
Status: Stable and very smooth
Created 2018-09-17
:good:
Screen Shots
Great job dev! So good to see at least a stable pie gsi.
Btw i had few questions, first is native video calling from dialer working ? Next any heating or excessive heating issues? Will there be furthur future updates?
raza_maestro said:
Great job dev! So good to see at least a stable pie gsi.
Btw i had few questions, first is native video calling from dialer working ? Next any heating or excessive heating issues? Will there be furthur future updates?
Click to expand...
Click to collapse
No heating issue nativ vedio calling there but I didn't test it
Maherabed1986 said:
No heating issue nativ vedio calling there but I didn't test it
Click to expand...
Click to collapse
Nice. What about future updates? Will you be actively making it better?
raza_maestro said:
Nice. What about future updates? Will you be actively making it better?
Click to expand...
Click to collapse
Sure I'll do my best I wanna collect the user feedback then I'll improve it to make sure all satisfied with this rom
Maherabed1986 said:
Sure I'll do my best I wanna collect the user feedback then I'll improve it to make sure all satisfied with this rom
Click to expand...
Click to collapse
Good to hear that buddy. Thanks again for the rom.
raza_maestro said:
Good to hear that buddy. Thanks again for the rom.
Click to expand...
Click to collapse
You're most welcome my friend
Great job. Thxi i have als somet questions. How about battery life? This rom is for al TA..... versions . And The camera is not laggy?.
EricH7001 said:
Great job. Thxi i have als somet questions. How about battery life? This rom is for al TA..... versions . And The camera is not laggy?.
Click to expand...
Click to collapse
It worth a try everything working no lag no issues so I need your feedback to improve it more and more
Battery life for me much better than Oreo camera not laggy
Amazing ! Very thanks for share, I will test when will have free time to configure all.
FM radio working?!?
Magister54 said:
FM radio working?!?
Click to expand...
Click to collapse
No sir it's not important for me
Please, someone that have installed this rom tell how is going. A little review. :highfive:
What about USB tethering for using the internet on a laptop?
cmaxwe said:
What about USB tethering for using the internet on a laptop?
Click to expand...
Click to collapse
Working
Flashing on my TA-1016 (fingers crossed!)
---------- Post added at 12:37 PM ---------- Previous post was at 12:21 PM ----------
cmaxwe said:
Flashing on my TA-1016 (fingers crossed!)
Click to expand...
Click to collapse
Doesn't recognize my SIM since my phone is a single SIM variant.
Any ideas?
Is this just something in the build.prop?
---------- Post added at 01:32 PM ---------- Previous post was at 12:37 PM ----------
cmaxwe said:
Flashing on my TA-1016 (fingers crossed!)
---------- Post added at 12:37 PM ---------- Previous post was at 12:21 PM ----------
Doesn't recognize my SIM since my phone is a single SIM variant.
Any ideas?
Is this just something in the build.prop?
Click to expand...
Click to collapse
Hmm... I am in a bit of a position now.
Can't figure out how to get it to recognize my SIM and if I switch back to my "current-slot" = "b" my phone isn't booting past the Nokia screen.
Might have just effectively made my phone a wifi-only device... :-/
My IMEI is correct for the SIM 1 slot. So that is good news probably....
cmaxwe said:
Flashing on my TA-1016 (fingers crossed!)
---------- Post added at 12:37 PM ---------- Previous post was at 12:21 PM ----------
Doesn't recognize my SIM since my phone is a single SIM variant.
Any ideas?
Is this just something in the build.prop?
---------- Post added at 01:32 PM ---------- Previous post was at 12:37 PM ----------
Hmm... I am in a bit of a position now.
Can't figure out how to get it to recognize my SIM and if I switch back to my "current-slot" = "b" my phone isn't booting past the Nokia screen.
Might have just effectively made my phone a wifi-only device... :-/
My IMEI is correct for the SIM 1 slot. So that is good news probably....
Click to expand...
Click to collapse
Could you solve that ?
neodante said:
Could you solve that ?
Click to expand...
Click to collapse
Not yet.
I moved my SIM over to another phone for now.
Downloading the World Wide firmware and am going to try to flash that to my TA-1016.
With any luck that will get me back to stock and working SIM.
Android 10 is here!
Took a while, but here's Lineage 17.1 builds, based on Android 10.
Everything should work AFAIK, but let me know if something doesn't.
If you run into problems installing Gapps, you might need an updated
TWRP build. It needed a change to support the new system-as-root
in Android 10. If the official TWRP builds doesn't have it yet, there's
links below of some builds I did.
For root, use Magisk: https://forum.xda-developers.com/apps/magisk
If you are doing backups of 17.1 with TWRP, and wants to restore one of these backups,
you need to flash this right after restoring, or otherwise the boot will hang: http://www.mediafire.com/file/a454nnpp8l7afbr/fix_rootfs_label.zip/file (Needed only for older TWRP, and not for the one linked to below)
Download:
GT-I9190: https://www.mediafire.com/file/ewdbbg757ujbc3r/lineage-17.1-20220816-UNOFFICIAL-serrano3gxx.zip/file
GT-I9192: https://www.mediafire.com/file/a0ya2fdcf0drjt1/lineage-17.1-20220817-UNOFFICIAL-serranodsdd.zip/file
GT-I9195: https://www.mediafire.com/file/3ky5...7.1-20220816-UNOFFICIAL-serranoltexx.zip/file
SPH-L520: https://www.mediafire.com/file/l0le....1-20220817-UNOFFICIAL-serranoltespr.zip/file
SCH-R890: https://www.mediafire.com/file/cqxl....1-20220817-UNOFFICIAL-serranolteusc.zip/file
Recovery (TWRP):
GT-I9190: https://www.mediafire.com/file/e42oml5716ekvk7/twrp-3.6.2_9-0-serrano3gxx.img/file
GT-I9192: https://www.mediafire.com/file/2plk5azmfxwsm5z/twrp-3.6.2_9-0-serranodsdd.img/file
GT-I9195: https://www.mediafire.com/file/wtsopyh3rmfoatf/twrp-3.6.2_9-0-serranoltexx.img/file
SPH-L520: https://www.mediafire.com/file/iw68mr671fgftnb/twrp-3.6.2_9-0-serranoltespr.img/file
SCH-R890: https://www.mediafire.com/file/417w6vp0m338fb0/twrp-3.6.2_9-0-serranolteusc.img/file
Link to all builds:
GT-I9190: http://www.mediafire.com/folder/4kjlyp6v2lfnh/lineage-17.1
GT-I9192: http://www.mediafire.com/folder/hw7l5hqe0fv1m/lineage-17.1
GT-I9195: http://www.mediafire.com/folder/3911mczazsvdt/lineage-17.1
Download Gapps: https://opengapps.org/?api=10.0&variant=pico
Sources:
https://github.com/LineageOS/android_kernel_samsung_msm8930-common
https://github.com/LineageOS/android_device_samsung_msm8930-common
https://github.com/LineageOS/android_device_samsung_serrano-common
https://github.com/LineageOS/android_device_samsung_serrano3gxx
https://github.com/LineageOS/android_device_samsung_serranodsdd
https://github.com/LineageOS/android_device_samsung_serranoltexx
https://github.com/arco/android_device_samsung_serranoltespr
https://github.com/arco/android_device_samsung_serranolteusc
Cellular not working on the 9192? Upgrade your baseband: https://forum.xda-developers.com/t/modem-odin-stopped-samsung-galaxy-s4-mini-duos-i9192.2768593/
Thanks arco <3
Thanks :good: arne everything working on I9192
Arslan140 said:
Thanks :good: arne everything working on I9192
Click to expand...
Click to collapse
Is it working for you???? because i try but failed... Recovery img dont work....he stoped and no recovery no boot rom...
khatir bahri said:
Is it working for you???? because i try but failed... Recovery img dont work....he stoped and no recovery no boot rom...
Click to expand...
Click to collapse
Both Rom and Recovery Works for me on my I9192
Maybe your download get corrupt
Root is not working though as arne said
i tried to patched boot.img for magisk but it did not work either
little things that i notice So far
1st when creating QR code or Scan QR code for wifi(Android 10 feature) Settings Got Crash
2nd conditions/Summaries that shown on the top section of the settings like turn on mobile data,your phone is on silent..etc There is no way to dismiss that on previous versions you can swype to dissmiss that
Everything seem to be working well in here
And here is some screenshots for ya
And another thing I installed the rom and the gapos with the latest official TWRP and not Arco's one
Hello,
thanks for your work.
Sadly there are some ugly and heavy bugs, escpecially regarding some hardware
related things.
Bluetooth Audio stutters and cause the whole system ui to get laggy and also
some force closes can happen. Audio streaming is not possible.
Wifi Direct is not working anymore.
Memory leaks appear.
And so on..
After some hours of intensive and frustrating testing i went back to stock rom
where i never encounter such issues.
Im using the phone at home without any simcard just for audio streaming from
my nas to my hometheatre-system.
Best regards.
Dear arco68 ! What about magisk ?
---------- Post added at 12:26 PM ---------- Previous post was at 11:54 AM ----------
It is not possible to send sms directly from the app ,you have to choose a sim to send sms in the "Network and Internet" settings"
Arslan140 said:
1st when creating QR code or Scan QR code for wifi(Android 10 feature) Settings Got Crash
Click to expand...
Click to collapse
Will be fixed in next build.
Jaroslav.100 said:
Dear arco68 ! What about magisk ?
Click to expand...
Click to collapse
Google magisk and system-as-root. It's not a straight forward thing in Android 10, due to the bootimage is not containing a real ramdisk anymore. As far as I could figure out, you have to patch the recoveryimage, and boot to recovery in order for magisk to load. When booting this patched recoveryimage, magisk will boot into the normal system unless you keep the hardware keys pressed all until recovery is loaded. It's all a bit messy, and I could not get this to work though. If anyones gonna mess with this, be sure you have backups, in case normal boot gets broken.
It is not possible to send sms directly from the app ,you have to choose a sim to send sms in the "Network and Internet" settings"
Click to expand...
Click to collapse
Dual SIM? Probably some stuff are not implemented yet for this.
Thank you arco, we will wait for your updates !
@arco68 is our devices can install the GSI roms or nah ?
Ala Ghanmi said:
@arco68 is our devices can install the GSI roms or nah ?
Click to expand...
Click to collapse
No
Ala Ghanmi said:
And another thing I installed the rom and the gapos with the latest official TWRP and not Arco's one
Click to expand...
Click to collapse
I've also got it right first time on my GT-I9195 with the official TWRP 3.3.1-0
Diresh said:
No
Click to expand...
Click to collapse
Okay get it
---------- Post added at 08:22 AM ---------- Previous post was at 08:21 AM ----------
Claudio4780 said:
I've also got it right first time on my GT-I9195 with the official TWRP 3.3.1-0
Click to expand...
Click to collapse
That's nice
Is network is working fine for both sim , because previously linage os 16 have issue
omgitsavinash said:
Is network is working fine for both sim , because previously linage os 16 have issue
Click to expand...
Click to collapse
Both Sims are working fine
I installed this ROM on my test device. It all works very well. The only problem I noticed was like @franticfreddy said, the Bluetooth audio doesn't work right.