Android Open Source Project - android-11.0.0_r17
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Credits: Google, Sony Xperia Developer World
-------------------------------------------------------------
Sorry for my english.
Hi everyone, this is the first time I am compiling a ROM.
It's just a test, as it seems to work I decided to share it with you.
-------------------------------------------------------------
Instructions:
Before you flash the images, make sure your device is unlocked through Sony’s unlock boot loader service and that the device is in Fastboot mode.
- Download the vendor image and flash first:
https://developer.sony.com/file/dow...es-for-aosp-android-11-0-kernel-4-14-yoshino/
- Unpack the vendor zip file to obtain the vendor image;
- Connect the device to your computer in Fastboot mode, by pressing volume up while inserting the USB cable. When the device is in Fastboot mode, the LED on the device will be illuminated in blue.
- Flash the vendor image by entering the following commands in a terminal window:
fastboot flash oem SW_binaries_for_Xperia_Android_<release version>_<platform>.img
- Download ROM:
http://www.mediafire.com/file/ph3z52u2staujx6/android-11.0.0_r17.zip/file
- Unpack the rom zip file to obtain the rom image;
- Flash the image by entering the following commands in a terminal window:
fastboot flash boot boot.img
fastboot flash recovery recovery.img ( Don't use the recovery in this rom, I've tested this TWRP 3.3.1 found here: https://forum.xda-developers.com/xperia-xz1/themes/twrp-3-3-0-aroma-compatible-ultra-low-t3922527 )
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash userdata userdata.img
-------------------------------------------------------------
Bugs:
- Tethering usb;
- Factory reset don't work;
- After the system is started the first time, restarting in recovery, the twrp goes into bootloop. To start twrp again you need to flash the userdata.img (factory reset) via fastboot;
- I don't know.
Tested:
- 4G;
- 3G;
- 2G;
- GPS;
- Voice Call;
- Wifi;
- Stock Camera;
- Fingerprint;
- Bluetooth.
-------------------------------------------------------------
I flashed the Android 11 GAPPS and everything seems to be working fine.
-------------------------------------------------------------
Source Code: https://github.com/sonyxperiadev/kernel/tree/aosp/LA.UM.7.1.r1
ROM OS Version: Android 11
ROM Kernel: Linux 4.14.196
Based On: AOSP
Security Patch: 05 November 2020
Version Information
Status: Test
Created 2020-07-11
Last Updated 2020-07-11
Can you share us the screenshots of ROM?
Also, is this ROM has Sony Music (Walkman) and Album app?
Demirag said:
Can you share us the screenshots of ROM?
Also, is this ROM has Sony Music (Walkman) and Album app?
Click to expand...
Click to collapse
I just downloaded the android 11 source code (40 Gb) and compiled it. So the rom is basic, it only has the main android stock apps:
phone, address book, calendar, camera, gallery and file browser.
If i try to flash it on my XZ Premium (G8141), can it be successfull? XZP is also Yoshino platform
gsep said:
Android Open Source Project - android-11.0.0_r17
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Credits: Google, Sony Xperia Developer World
-------------------------------------------------------------
Sorry for my english.
Hi everyone, this is the first time I am compiling a ROM.
It's just a test, as it seems to work I decided to share it with you.
-------------------------------------------------------------
Instructions:
Before you flash the images, make sure your device is unlocked through Sony’s unlock boot loader service and that the device is in Fastboot mode.
- Download the vendor image and flash first:
https://developer.sony.com/file/dow...es-for-aosp-android-11-0-kernel-4-14-yoshino/
- Unpack the vendor zip file to obtain the vendor image;
- Connect the device to your computer in Fastboot mode, by pressing volume up while inserting the USB cable. When the device is in Fastboot mode, the LED on the device will be illuminated in blue.
- Flash the vendor image by entering the following commands in a terminal window:
fastboot flash oem SW_binaries_for_Xperia_Android_<release version>_<platform>.img
- Download ROM:
http://www.mediafire.com/file/ph3z52u2staujx6/android-11.0.0_r17.zip/file
- Unpack the rom zip file to obtain the rom image;
- Flash the image by entering the following commands in a terminal window:
fastboot flash boot boot.img
fastboot flash recovery recovery.img ( Don't use the recovery in this rom, I've tested this TWRP 3.3.1 found here: https://forum.xda-developers.com/xperia-xz1/themes/twrp-3-3-0-aroma-compatible-ultra-low-t3922527 )
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash userdata userdata.img
-------------------------------------------------------------
Bugs:
- I don't know.
Tested:
- 4G;
- 3G;
- 2G;
- GPS;
- Voice Call;
- Wifi;
- Stock Camera;
- Fingerprint.
-------------------------------------------------------------
I flashed the Android 11 GAPPS and everything seems to be working fine.
-------------------------------------------------------------
ROM OS Version: Android 11
ROM Kernel: Linux 4.14.196
Based On: AOSP
Security Patch: 05 November 2020
Version Information
Status: Test
Created 2020-07-11
Last Updated 2020-07-11
Click to expand...
Click to collapse
I have tried this rom
thank you for your hard work.
In my opinion, this ROM is pretty good with almost no problems
But please fix Eraser All data (factory reset) from settings. i found it was always force closed
Too much drain on the battery, maybe because fingerprints always work without pressing power
The feature for displaying the frame rate needs to be improved because it is less accurate
a little troublesome because I can't enter TWRP maybe because I didn't flash recovery.img from zip
I will be looking forward to improvements of this rom
maybe I will change this comment after getting root access
elmirer said:
If i try to flash it on my XZ Premium (G8141), can it be successfull? XZP is also Yoshino platform
Click to expand...
Click to collapse
I recommend that you only use the rom that matches the codename of the device.
to avoid things that are not desirable
https://forum.xda-developers.com/xz-premium/development
elmirer said:
If i try to flash it on my XZ Premium (G8141), can it be successfull? XZP is also Yoshino platform
Click to expand...
Click to collapse
I don't know, it could but I wouldn't risk it.
starvirus10 said:
I have tried this rom
thank you for your hard work.
In my opinion, this ROM is pretty good with almost no problems
But please fix Eraser All data (factory reset) from settings. i found it was always force closed
Too much drain on the battery, maybe because fingerprints always work without pressing power
The feature for displaying the frame rate needs to be improved because it is less accurate
a little troublesome because I can't enter TWRP maybe because I didn't flash recovery.img from zip
I will be looking forward to improvements of this rom
maybe I will change this comment after getting root access
I recommend that you only use the rom that matches the codename of the device.
to avoid things that are not desirable
https://forum.xda-developers.com/xz-premium/development
Click to expand...
Click to collapse
Thanks for trying it.
I'll try to fix what you told me, but I don't guarantee that I will.
It also happened to me that the twrp did not start.
After re-flashing userdata.img (factory reset) via fastboot, twrp recovery started.
I assume twrp doesn't read the encrypted data and doesn't start.
Any advice is welcome.
Is it treble ready BY ANY CHANCE?
JimKatsanos said:
Is it treble ready BY ANY CHANCE?
Click to expand...
Click to collapse
I don't know, I haven't tried.
@gsep
Thanks for the Great work.
Someone who tried this rom mentioned that fingerprint works without pressing power, which I believe is really useful. I just wanted to know if it's Android 11 feature or you added it yourself?
I just downloaded and compiled the android 11 source code. I didn't make any changes to the code.
sohrab1985 said:
@gsep
Thanks for the Great work.
Someone who tried this rom mentioned that fingerprint works without pressing power, which I believe is really useful. I just wanted to know if it's Android 11 feature or you added it yourself?
Click to expand...
Click to collapse
This is actually a bug , firstly existent in android 10 but devs fixed it there ... so yeah
JimKatsanos said:
This is actually a bug , firstly existent in android 10 but devs fixed it there ... so yeah
Click to expand...
Click to collapse
It should be a feature rather than a bug, like AOF
Of course it's only a feature when it won't affect the battery drain or else it's a bug.
THREAD CLOSED
@gsep Please check your PM.
Regards,
shadowstep
Forum Moderator
EDIT: Thread re-opened.
doesn;twant to connect to wifi
it damn issue
Sorry for overspamming this thread but... Is the screen "lagging" bug still here in 11? Also , what about battery life?
JimKatsanos said:
Sorry for overspamming this thread but... Is the screen "lagging" bug still here in 11? Also , what about battery life?
Click to expand...
Click to collapse
At the moment no changes have been made. I don't know how long the battery life is, I use this device as a second smartphone, and I wanted to try to compile a rom to get the latest security patches. I have to learn a lot to start making changes to the source and I have to find the time to do it. If I don't have any problems I will certainly try to keep the security patches updated.
Related
SonyAOSP builds by @davidteri91 (This ROM has included GAPPS)
Code:
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Audio
GPS
What's not working :
Wi-Fi HotSpot 5Ghz
Miracast
Random reboots
Maybe more...
Report all found bugs to the sony bugtracker: https://github.com/sonyxperiadev/bug_tracker/issues
Steps for Flash:
fastboot flash oem xxxxx.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase userdata (if needed or you on stock)
Downloads :
ROM: https://androidfilehost.com/?w=files&flid=286595&sort_by=date&sort_dir=DESC
OEM: https://developer.sony.com/file/download/software-binaries-for-aosp-pie-android-9-0-kernel-4-9-loire/
TWRP: https://eu.dl.twrp.me/suzu/
Warning! From april build for dual sim use new patch from 2019.04.23. in attachment.
Sources:
SonyXperiaDev: https://github.com/sonyxperiadev?tab=repositories
SonyAOSP: https://github.com/SonyAosp
Contributors:
@davidteri91
ROM OS Version: 9
ROM Kernel: Linux 4.9.x
ROM Firmware Required: 34.4.A.2.118
Created: 2019-03-24
Last Updated: 2019-04-23
Successfully installed the ROM (the only Pie ROM for F5122 here I can flash that has GApps, plus the installation process is quite easy).
- Wi-Fi 5Ghz works for me.
- "There's an internal problem with your device. Contact your manufacturer for details" pops up after boot (probably due to the kernel, which is kinda annoying).
- There seems to be something wrong with TWRP 3.2.3-0 on this ROM. I could install and use it once, but after reboot it just disappeared.
- ...
Still testing. Thanks for the work!
can a step by step guide/process for noobs be povided here?
I am on stock unrooted 8.0 Oreo
prasad12ka4 said:
can a step by step guide/process for noobs be povided here?
I am on stock unrooted 8.0 Oreo
Click to expand...
Click to collapse
- Download everything in the links above (ROM, TWRP and OEM)
- Extract ROM, OEM to "platform-tools" (your adb folder)
- Shift click "platform-tools", open as cmd
- Enable USB-debug on your phone
In cmd:
adb devices
adb reboot bootloader
fastboot flash oem "oem.img"
fastboot flash boot "boot.img"
fastboot flash system "system.img"
fastboot erase userdata
--> Reboot, done. After boot, flash recovery TWRP if you want. That's what I did for this ROM.
P/s: I flashed stock Oreo with Emma before flashing this ROM.
LOLisLIFE said:
Successfully installed the ROM (the only Pie ROM for F5122 here I can flash that has GApps, plus the installation process is quite easy).
- Wi-Fi 5Ghz works for me.
- "There's an internal problem with your device. Contact your manufacturer for details" pops up after boot (probably due to the kernel, which is kinda annoying).
- There seems to be something wrong with TWRP 3.2.3-0 on this ROM. I could install and use it once, but after reboot it just disappeared.
- ...
Still testing. Thanks for the work!
Click to expand...
Click to collapse
Can I flash magisk?
I used this ROM some time ago, that build overheated a lot, and had some reboots, I couldn't get root in any possible way
Maybe this version is rootable
realthrash said:
I used this ROM some time ago, that build overheated a lot, and had some reboots, I couldn't get root in any possible way
Maybe this version is rootable
Click to expand...
Click to collapse
All versions of SonyAOSP build can have root with Magisk 18+
lookmanns14 said:
Can I flash magisk?
Click to expand...
Click to collapse
of course
Jurn_Software said:
All versions of SonyAOSP build can have root with Magisk 18+
Click to expand...
Click to collapse
I need to boot up to system, then reboot to TWRP and root, but since this ROM deletes the Recovery it's a little bit complicated
realthrash said:
I need to boot up to system, then reboot to TWRP and root, but since this ROM deletes the Recovery it's a little bit complicated
Click to expand...
Click to collapse
donwload and reflash twrp 3.2.3-2 recovery via adb
Is possible to add dual sim via build,prop?
khriiza said:
Is possible to add dual sim via build,prop?
Click to expand...
Click to collapse
yes, with this patch
Security patch March, April to be?
[email protected] said:
Security patch March, April to be?
Click to expand...
Click to collapse
April security patch are coming in few days, stay tuned
Jurn_Software said:
April security patch are coming in few days, stay tuned
Click to expand...
Click to collapse
Can you make an optimized kernel for this ROM?
LOLisLIFE said:
Can you make an optimized kernel for this ROM?
Click to expand...
Click to collapse
I'm not a developer. Kernel provided by sonyxperiadev developers.
P.S. due to problems related to WiFi in tone platform ... New releases are delayed to next week ...
April security patch released!!!
https://androidfilehost.com/?fid=1395089523397948583
Jurn_Software said:
April security patch released!!!
https://androidfilehost.com/?fid=1395089523397948583
Click to expand...
Click to collapse
For install this ROM we need a unlocked bootloader right, random reboot is fixed in new build and can I install this ROM if I from AOSPA Pie beta ?
Mashrmallow said:
For install this ROM we need a unlocked bootloader right, random reboot is fixed in new build and can I install this ROM if I from AOSPA Pie beta ?
Click to expand...
Click to collapse
no, random reboots not fixed. I have two the last day
Mashrmallow said:
For install this ROM we need a unlocked bootloader right, random reboot is fixed in new build and can I install this ROM if I from AOSPA Pie beta ?
Click to expand...
Click to collapse
Are the random reboots as bad as AOSPA pie?
I heard people saying it's Quickstep (the recent apps UI) that caused the crashes. Maybe try using a non-quickstep launcher (eg. Nova) and report back?
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
BUG :
OTG
Lemme know
Install guide:
Boot :
Code:
fastboot boot <twrp.img>
Download: here
Contributors
imjyotiraditya
Thx to jjjhitel for his EROFS patch
Source Code: https://github.com/TeamWin/android_bootable_recovery
https://github.com/imjyotiraditya/device_xiaomi_odin-twrp
thanks and reserved
thanks and reserved
treid it this morning, and it looks and feels great so far.. no errors.
Would it be possible for somebody to post a guide for this, never installed it before?
jrvenge said:
Would it be possible for somebody to post a guide for this, never installed it before?
Click to expand...
Click to collapse
I'm not entirely sure what you mean tbh. Would you mind to explain?
imjyotiraditya said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
BUG :
OTG
Lemme know
Install guide:
Boot :
Code:
fastboot boot <twrp.img>
Download: here
Contributors
imjyotiraditya
Thx to jjjhitel for his EROFS patch
Source Code: https://github.com/TeamWin/android_bootable_recovery
https://github.com/imjyotiraditya/device_xiaomi_odin-twrp
Click to expand...
Click to collapse
Hey, i wanted to report a bug...
After i installed twrp permanently by advanced settings, i lost the touchscreen, after i rebooted into recovery.
SanHelios said:
Hey, i wanted to report a bug...
After i installed twrp permanently by advanced settings, i lost the touchscreen, after i rebooted into recovery.
Click to expand...
Click to collapse
how did u recover sir ? flashed original boot.img?
jrvenge said:
Would it be possible for somebody to post a guide for this, never installed it before?
Click to expand...
Click to collapse
as of now, no use of flashing twrp as there are no proper custom rom, but inorder to put this ur phone should be unlocked, to do that follow this guide https://forum.xda-developers.com/t/...to-eu-rom-and-root-guide-with-magisk.4338671/
vamsi209 said:
how did u recover sir ? flashed original boot.img?
Click to expand...
Click to collapse
Kinda... i booted the twrp-recovery bootimage by using
fastboot boot twrp.img
that brought me back to twrp and restored touchscreen-control. In twrp i formatted the device and completely wiped all partitions, so i would have a clean install. After all that was done i returned to bootloader and used the fastboot-image to clean-flash everything. I wanted to do this anyways, so no biggy.
It's still okay to use it, but installing it on the device as permanent recovery doesn't work as long as the touchscreen doesn't work at all.. but when this is fixed, go for it.
already did all of it...
vamsi209 said:
as of now, no use of flashing twrp as there are no proper custom rom, but inorder to put this ur phone should be unlocked, to do that follow this guide https://forum.xda-developers.com/t/...to-eu-rom-and-root-guide-with-magisk.4338671/
Click to expand...
Click to collapse
already did all of it...
SanHelios said:
Hey, i wanted to report a bug...
After i installed twrp permanently by advanced settings, i lost the touchscreen, after i rebooted into recovery.
Click to expand...
Click to collapse
Fixed!
Thanks for reporting..
vamsi209 said:
as of now, no use of flashing twrp as there are no proper custom rom, but inorder to put this ur phone should be unlocked, to do that follow this guide https://forum.xda-developers.com/t/...to-eu-rom-and-root-guide-with-magisk.4338671/
Click to expand...
Click to collapse
Phone is already unlocked as im running 21.9.28 lol
jrvenge said:
Phone is already unlocked as im running 21.9.28 lol
Click to expand...
Click to collapse
to just run this twrp, u can boot your device to bootloader, open terminal or powershell, and use command
fastboot boot twrp*.img
this will boot your twrp recovery,
as mentioned by @SanHelios there seems to be a small bug when u r flashing it permanently as recovery,
and the dev already got a fix for the same, he will mostly update the links tomorrow, i tested and it was working,
this is the file he provided, link, @SanHelios test this mate
download the above file,
use fastboot boot twrp*.img, and go to advance, and click on flash current twrp,
it will patch your boot.img file and flash the patched boot.img with twrp recovery
use volume up and power button combo to boot into twrp
imjyotiraditya said:
Fixed!
Thanks for reporting..
Click to expand...
Click to collapse
Thx for your awesome work, man..
I still dont get what it actually does lol
jrvenge said:
I still dont get what it actually does lol
Click to expand...
Click to collapse
You mean, the general function of TWRP?
yes
jrvenge said:
yes
Click to expand...
Click to collapse
TWRP is a well-rounded recovery for android-devices. There's a lot it can do, but basicly, you use it to flash/install software or images on your device. If there is a custom rom you wanna use, you flash it via TWRP, since the stock roms-recoveries only flash/install their associated roms. Apart from that, you can wipe or format your device, so it will be "clean" if you want to make a fresh installation.
In the past it was simple to install it, because devices were mostly A-only devices with a dedicated "recovery"-partition. To install it, the most common way was
- Boot into Fastboot mode, connect android via USB
- open computer CLI/Shell-window
- "fastboot flash recovery twrp.img" - Enter
The Mi Mix 4 is an A/B-Device, which means that the vital partitions are doubled and there's no "recovery"-partition anymore, since all recovery-functions are parked in a different partition. TWRP offers the ability to install itsself according to the A/B-Partitions-scheme and therefore becoming the new System-Recovery. Here the installation-steps are different.
- Boot into Fastboot mode, connect android via USB
- open computer CLI/shell-Windows
- "fastboot boot twrp.img" - Enter <- Starts the system using the image
- Touch Advanced
- Touch "Flash Current TWRP"
If a custom rom ever becomes available, there's certain routine you want to do...
backup vital information and files
format device
wipe all partitions
flash Firmware required
flash rom
flash Google Apps i.e. Open Gapps Project or NikGapps if available and desired
wipe dalvik-cache/cache/data
Enjoy
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Works:
1. Decryption(Support pattern/pin, tested on V12.5.6 and 21.9.27)
2. MTP/ADB
3. Fastbootd
4. ADB Sideload
5. Vibration
6. ...
Features:
1. Android 11 Support
2. Magisk-v23.0 included
2. Prevent from replacing TWRP with stock recovery
3. DTBO Patch
4. Support for flashing rom(>=4GB)
5. Enable /cache partition
Not working:
1. Tell me
Changelog:
1. Initial release
INSTALLATION:
1. Download the TWRP image file to your PC.
2. Put your device into fastboot.
3. Type the following command to flash the recovery:-
Code:
fastboot flash recovery twrp-3.5.2-cas-xayah.img
4. Reboot to recovery
Download:
TWRP
Donation:
PayPal: https://paypal.me/XayahSuSuSu
Telegram Group: https://t.me/joinchat/iSOZ2LngNXEzYzk9
Source Code:
Tree: https://github.com/XayahSuSuSu/twrp_device_xiaomi_cas
Great job
But i faced one issue when i try to make a backup
How can i solve it ?
EDIT: In TWRP, go in "Advanced" menu => "Terminal" => Type: rm /data/extm -Rf
Source: Poney70
From Xiaomi.ea
Hi, when going from stock (fastboot) to this, which other images do I need, and where should I get them? I can see that the (old) guides mention flashing a "vbmeta"?
ballajalla said:
Hi, when going from stock (fastboot) to this, which other images do I need, and where should I get them? I can see that the (old) guides mention flashing a "vbmeta"?
Click to expand...
Click to collapse
Just follow my guide. You only need to flash rec.img
Can I also flash the Twrp.img through the Twrp I already have.?
*justintime* said:
Can I also flash the Twrp.img through the Twrp I already have.?
Click to expand...
Click to collapse
Of course
Xayah said:
Just follow my guide. You only need to flash rec.img
Click to expand...
Click to collapse
Thank you for your replay, but I am confused about the `rec.img` you mention, which image is this? I can only see one on github, which is `twrp-3.5.2-cas-xayah.img`
ballajalla said:
Thank you for your replay, but I am confused about the `rec.img` you mention, which image is this? I can only see one on github, which is `twrp-3.5.2-cas-xayah.img`
Click to expand...
Click to collapse
Thats it. My guide is just a example
Hi, why it take so much time for decrypting data?
Anyone installed an Android 12 ROM using this? I want to try updating to Xiaomi.eu MIUI13 the instant it comes out for the Mi 10 Ultra.
AerationCheese said:
Anyone installed an Android 12 ROM using this? I want to try updating to Xiaomi.eu MIUI13 the instant it comes out for the Mi 10 Ultra.
Click to expand...
Click to collapse
Not support A12
What are people using to flash the Android 12 ROMs on the Mi 10 Ultra then?
AerationCheese said:
What are people using to flash the Android 12 ROMs on the Mi 10 Ultra then?
Click to expand...
Click to collapse
I will flash Xiaomi EU Weekly MIUI 13 with fastboot. It was released yesterday.
MIUI 13 - 22.2.17/19
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
Could that Project be a solution for the camera? :
GitHub - AtomicXZ/vendor_xiaomi_miuicamera: MIUI cam for AOSP
MIUI cam for AOSP. Contribute to AtomicXZ/vendor_xiaomi_miuicamera development by creating an account on GitHub.
github.com
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM/Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Working Features:
- Decryption Works
- Backup works
- Wipes Work
- MTP
- ADB
- OTG
- RUI 2 ozip Flashing
- RUI 1 ozip flashing
Not Working:
- No f2fs support yet
- Not tested on CN variants (Can't confirm working status)
Flashing Guide:
Patched VBMETA is must to boot a twrp , so flash the below image to successfully boot this recovery and make it available even after booting back to RealmeUI.
Download Links:
TWRP Download Link
VBMETA Link
To flash TWRP:
fastboot flash recovery twrp-3.6-RUI2-RMX1931-final.img
Flash the VBMETA using below commands
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_path.img
ADB and Fastboot Drivers:
ADB and Fastboot Installer
Source code:
https://github.com/TeamWin/android_bootable_recovery
https://github.com/arnodorian-r/recovery_realme_RMX1931
https://github.com/arnodorian-r/kernel_realme_sm8150
Credits:
Thanks to @mrtechnophile2.0 , Roy for the testing
Thanks @pjgowtham @XiaoAk for guiding me
The best thing ever happened for realme ui 2. Great work mate..!
Finally, a proper working Recovery for our device
Wow...Finally Working TWRP for RMX1931 on RUI2.
Thanks alot bro.
Can I flash this, when I'm on Lineage-18.1?
zheka99 said:
Can I flash this, when I'm on Lineage-18.1
Click to expand...
Click to collapse
Technically its possible...but you should do it after roms released based on rui2 firmware. If not , you will endup with broken OS. For now dont flash custom roms with this recovery.
can i flash magysk to optine root, wich version?
Isavar said:
can i flash magysk to optine root, wich version?
Click to expand...
Click to collapse
Magisk-92546e8a(23016) from CANARY all Ok!
Sorry for my English. And thank you very much for your work. I have the mobile with the latest version of rui2 and with root done following this guide:
https://forum.xda-developers.com/t/...fix-rui-2-0-android-11-global-indian.4371041/ When I went to install twrp, the mobile only started in twrp , and I had to reinstall everything. I used realme flashtool and refollowed the guide to get me back up and running properly. What could have happened?
Leozgz85 said:
Sorry for my English. And thank you very much for your work. I have the mobile with the latest version of rui2 and with root done following this guide:
https://forum.xda-developers.com/t/...fix-rui-2-0-android-11-global-indian.4371041/ When I went to install twrp, the mobile only started in twrp , and I had to reinstall everything. I used realme flashtool and refollowed the guide to get me back up and running properly. What could have happened?
Click to expand...
Click to collapse
Hi
was the same for me, had to reinstall everything, only started in TWRP. Would like to install the recovery but I don't feel like this error anymore.
Thanks. It's working.
Doesnt work for me, i cant boot to realme ui after flashing the vbmeta, i got stuck on recovery. (f.14)
This recovery is broken for me, it gives me no space left on sdcard even after a full data reformat, ozip extraction stops after 500mb.
It's just not working as it should 3.4 works best
arnodorian-r said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM/Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Working Features:
- Decryption Works
- Backup works
- Wipes Work
- MTP
- ADB
- OTG
- RUI 2 ozip Flashing
- RUI 1 ozip flashing
Not Working:
- No f2fs support yet
- Not tested on CN variants (Can't confirm working status)
Flashing Guide:
Patched VBMETA is must to boot a twrp , so flash the below image to successfully boot this recovery and make it available even after booting back to RealmeUI.
Download Links:
TWRP Download Link
VBMETA Link
To flash TWRP:
fastboot flash recovery twrp-3.6-RUI2-RMX1931-final.img
Flash the VBMETA using below commands
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_path.img
ADB and Fastboot Drivers:
ADB and Fastboot Installer
Source code:
https://github.com/TeamWin/android_bootable_recovery
https://github.com/arnodorian-r/recovery_realme_RMX1931
https://github.com/arnodorian-r/kernel_realme_sm8150
Credits:
Thanks to @mrtechnophile2.0 , Roy for the testing
Thanks @pjgowtham @XiaoAk for guiding me
Click to expand...
Click to collapse
I followed this guide and many others in the past 48 hours, with no success. Every time I flash TWRP and the VBMETA, I get stuck in TWRP bootloop.
I started unblocking the bootloader, rolling back to RUI1 - Android 9 and using the Deep-Test App.
After the roll back, I got the phone unblocked right, but then first soft-brick, with only bootloader available and no way to flash a working ROM. After some searches, I've finally managed to unbrick, using OPPO flash tool, and installing stock rom RMX1931_11_F.14_2021102817443142.
This gives me a working phone, RUI.2 - Android 11. Standard recovery.
I tried to flash TWRP and got the phone soft bricked again, in TWRP recovery bootloop.
I'd like to install TWRP and from there going to OrangeFox and finally install Lineage 19.1...
How can i first have a working TWRP recovery??? If you can support also following steps, would be amazing. Thank you!!!
I went few step further... but still I am not able to install a working custom recovery for my realme X2 pro.
I have now also rooted my device with magisk.
I just need a custom recovery to perform 2 actions:
- make a NANDroid backup;
- install a custom ROM.
Any advice? Thank you for your time!
Installed. Working like a charm with lineage 19.1. Only problem: can't access files in storage. Digging into the matter, it seems to be an issue with android 12's new encryption method, which can't be overriden by this version of the recovery. There's a brand new TWRP 3.7.0_9.0 in the official TWRP website which boasts to overcome this problem but, whenever I try to install it (with or without the vbmeta.img provided for version 3.6.0_11), the recovery won't start. Guess a new vbmeta.img is needed as everything goes ok reinstalling TWRP 3.6.0_11 and its corresponding vbmeta. Tried to extract and install vbmeta.img from the lineage zip file without success. Shall we have to patch vbmeta.img? How can we do that? Through Magisk? I've come across some "vbmeta patcher" apk... Am I pointing the right way?
can any one help me to unlock bootloader in realme x2 pro . i am on RUI 10 . i installed in depth tool it said seccesful but no bootloader just keep rebooting and showing fast boot for a moment .. help please i search every where for fix but no way to yet
I'm using the CN variant device, which I understand does not yet have confirmed support, nonetheless sharing the error I'm encountering in case it's a simple or obvious fix I'm missing.
Having followed all above steps, I'm able to flash and get into TWRP recovery, but decryption always failed (even after a dozen tries) with the following:
"Attempting to decrypt FBE for user 0...
Failed to decrypt user 0"
Much obliged for any insight on this. I'm attempting to get back on OF after successfully installing Lineage 19.1, which broke the OF recovery, and since OF needs to be installed as a ZIP, I need to get some version of TWRP working as an intermediary. Specifically this is because I didn't install GAPPS along with Lineage 19.1 (I misread the opening post, which seemed to imply that GAPPS was included in that particular ROM). So alternatively, if there's another way to get GAPPS onto the device without recovery (sideload won't work since I can't decrypt...) then that would be helpful too.
Thanks in advance for any insight on this!
Android Open Source Project android-11.0.0_r46Disclaimer:* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
Instruction:
Unlock boot loader
Connect the device to your computer in Fastboot mode (by pressing volume up while inserting the USB cable)
Download and extract the vendor image provided by Sony
Flash the vendor image provided by Sony
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_11_4.14_v8a_yoshino.img
Download and extract AOSP image android-11.0.0_r46.zip
Flash the boot, recovery, system, vendor and userdata images
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash system system.img
Code:
fastboot flash vendor vendor.img
Code:
fastboot flash userdata userdata.img
Code:
fastboot reboot
DONE!
If you have any problem with this recovery image, then download and flash the latest TWRP recovery release.
What's working:
Wifi
Hotspot
Bluetooth
GPS
4G/3G/2G
Camera
Fingerprint sensor (work without press the button)
BUGS:
TWRP recovery goes into bootloop, so start twrp again you need to flash the userdata.img (factory reset) via fastboot. There is this twrp recovery here on xda link.
Screen lag
After each start / restart the screen must be turned off and on again get to the homescreen
Credits:
Sony Xperia Developer World
Source code:
GitHub
Info:
ROM OS Version: Android 11
ROM Release: android-11.0.0_r46
ROM Kernel: Linux 4.14
Based On: AOSP
Status: Testing
Created 2022-02-14
Last Updated 2022-02-17
Reserved
bugs?
nathankaunang said:
bugs?
Click to expand...
Click to collapse
I am currently testing the build, as soon as I find bugs I will report them. If you have specific requests to test, please propose them. At the moment everything seems to be working fine.
D_Riccardo said:
I am currently testing the build, as soon as I find bugs I will report them. If you have specific requests to test, please propose them. At the moment everything seems to be working fine.
Click to expand...
Click to collapse
I mean, are the laggy screen bug or the green camera, or the signal drops bugs fixed?
JimKatsanos said:
I mean, are the laggy screen bug or the green camera, or the signal drops bugs fixed?
Click to expand...
Click to collapse
The screen lags slightly, the camera work perfect and for now I did not see any signal drops
Hi, the bugs I found:
- after each start / restart the screen must be turned off and on again get to the homescreen
- SIM card is not detected at all
hihiman1 said:
Hi, the bugs I found:
- after each start / restart the screen must be turned off and on again get to the homescreen
- SIM card is not detected at all
Click to expand...
Click to collapse
Thank you, I have also encountered that problem of the screen at startup. The sim card not detected it's strange I tested the data traffic and it works. I think this kernel 4.14 has more problems than the 4.4.
D_Riccardo said:
...The sim card not detected it's strange I tested the data traffic and it works. I think this kernel 4.14 has more problems than the 4.4.
Click to expand...
Click to collapse
Maybe it's linked to the latest version of SW_binaries_for_Xperia_Android_11_4.14_v9a_yoshino.zip (released 15.02.2022) v8a is no longer available
hihiman1 said:
Maybe it's linked to the latest version of SW_binaries_for_Xperia_Android_11_4.14_v9a_yoshino.zip (released 15.02.2022) v8a is no longer available
Click to expand...
Click to collapse
Yes, I see they updated the .zip file on the official site, luckily I didn't delete the file I used, I uploaded the v8a version here: https://www.udrop.com/6n1x/SW_binaries_for_Xperia_Android_11_4.14_v8a_yoshino.zip
Let me know if at least solved the problem with the sim card, so I will update the link in the post.
D_Riccardo said:
Yes, I see they updated the .zip file on the official site, luckily I didn't delete the file I used, I uploaded the v8a version here: https://www.udrop.com/6n1x/SW_binaries_for_Xperia_Android_11_4.14_v8a_yoshino.zip
Let me know if at least solved the problem with the sim card, so I will update the link in the post.
Click to expand...
Click to collapse
Yes now it works - please add the link to SW_binaries also in the 1st post
Wouldn't it be said to install the rom on the g8343?
Ramfisrd said:
Wouldn't it be said to install the rom on the g8343?
Click to expand...
Click to collapse
I would not risk to install to g8343, it could work as not