Hi Guys,
Do you know if there is a module that enables support for USB ethernet adapters?
The USB device is recognized (by Apps that show USB devices), but it seemsthat MIUI does not support ethernet connections.
Regards.
Related
Hi,
how i can use a usb ethernet adapter on any tablet?
I only have to create usb net device driver, load it and get the interface.
But now the dhcp is not working!
But why?
How can i get the adapter working with dhcp if i plug it in?
Is there a trick inside the kernel oder android 4.2.2?
PLEASE HELP!
Big big thanks
Bye
Just received my Nexus Player today, and I can confirm that there is some level of driver/hardware support for USB Ethernet adapters over OTG. Hardware-wise, I have an OTG cable attached to a D-Link USB 2.0 hub, and a Cisco 10/100 USB Ethernet adapter attached to the hub.
Some notes about the behavior:
The IP address configuration happens automatically if you're using DHCP on your network, but there are no options in the initial configuration to enter static IP addressing. If you're unboxing and setting up your Player for the first time, just make sure to have your USB Ethernet adapter plugged in before plugging in power.
Aside from lacking configuration options, everything appears to work flawlessly, and the Player automatically downloaded an update from Google on first boot.
Hope this helps.
Good to know... thanks!
I bet you can figure out the MAC address, and assign an IP address through the router. It's better that way anyway.
Sent from my Oneplus One with Tapatalk Pro.
Wondering if a USB 3.0 hub with gigabit Ethernet will work on Nexus player.
The specs of Nexus player is USB 2.0, by connecting a USB 3.0 hub with gigabit Ethernet, will it work by capping at 480mb/s USB 2.0 transfer rate?
I doubt you would get the full 480mbps but you should be able to do better than 100mbps.
Sent from my Nexus 5
dongdong said:
Wondering if a USB 3.0 hub with gigabit Ethernet will work on Nexus player.
The specs of Nexus player is USB 2.0, by connecting a USB 3.0 hub with gigabit Ethernet, will it work by capping at 480mb/s USB 2.0 transfer rate?
Click to expand...
Click to collapse
i dont think it would make a difference, besides 10/100 is way enough to stream even 4k media
Hey everyone,
I'm trying something right now, that I guess, a lot of people had already tried...
My stuff :
- Motorola/Google Nexus 6
- Virei Perception
- USB OTG
- PS3 GamePad
- Cardboard+
- Limelight
My problem is that my office is "far" from my adsl box, so the connection for limelight is very poor and unplayable.
I just want to know if it's possible to connect limelight via USB, or connect the phone via USB in order to play limelight. Everything without an ethernet adapter I mean.
If you have an idea...
Thanks you :victory:
U can try an ethernet connection with otg USB cable and USB to ethernet adaptor with app from appstore called "ethernet".
Hi all, I have a MK809III tv stick with Android 4.4.2 running. I use it as a mini PC with a LCD screen. I have attached to its USB OTG ports a quadrate 2.0 4 ports USB HUB (google for this and you can see it) , and connected to it, a PS/2 keyboard (using an usbtoPs2 adapter), an usb mouse, a usb ethernet dongle, and a usb sound card dongle. When I use this combo, all works fine, the mouse can drag and select, also wheel works, the keyboard works fine, the ethernet run smooth, and the sound works as player and mic recorder, the only thing not works is to reboot the tv stick, and launch android again (with other MK89III tv stick this also works flawlessly), to get this, I must to unplug RJ45 or usb ethernet. But this last question is not my main problem. The main problem is that I can not make the combo work anyway if I change usb hub model, If I use a 2.0 usb square hub (no name brand) with a little blue led installed, all works fine, but using other hub (I have tested two others), thare is no way to work. The main situation is that the hub stops work, and all item connected not works at all. But commonly, mouse works with a bad behaviour in button response, usb sound disconnects suddenly, or usb ethernet lagg or not works at all. My question is about this behaviour with usb hubs, if there is a special requirements in hardware to match an usb hub with this kind of android devices, or if thare are some drivers that can solve this.
Thank in advance.
Solved
I have solved the two main problems in order to use my MK809III RK3188 as a mini pc with usb hub and rj45 ethernet. The hub must to be a chip on board one, no an all-in-one glued ultra-cheap type, this is a mark of better quality and response, then you can conect keyboard/mouse, usb or ps2 with usb converters, usb sound, and usb pendrives. The ethernet must be an ASIX AX88772C, this a true usb ethernet 100mbps (7MB/s real) device, since I use it there is no lag, no boot errors, no delays or shorts in Tx/Rx. That´s all.
Does Redmi Note 4 support OTG for Ethernet (LAN) connection using (USB OTG + LAN Adapter) ??