[ROM][10.0][WASABI][OFFICIAL] Resurrection Remix 8.6.4 || 21th of November 2020 - Realme 6 ROMs, Kernels, Recoveries, & Other Develo

DON'T QUOTE THE WHOLE POST !!!
DON'T SPAM OVER THE TOPIC !!!
DON'T ASK FOR ETA !!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
What's working
Everything other than those mentioned in 'Not working list'.
What's not working
Front cmaera doesn't capture. Use OpenCamera or any other Camera APP instead!
Did you find any?
Installation Instructions
Note: if you're comming from any beta releases, please, wipe data otherwise SystemUI will keep crashing!
First Time Install / Clean Flash
0. Disable AVB with fastboot (fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img)
1. Flash PBRP with fastboot (fastboot flash recovery recovery.img)
2. Reboot to Recovery
3. Wipe Data/Cache
4. Flash the ROM (Could need to unmount system before if it's mounted)
5. Format data
7. Flash GAPPs
6. Reboot to System
Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash the ROM
4. Reboot to System
​Download
Resurrection Remix 8.6.4 - Stable 3 - ofiicial
PBRP recovery
VBmeta
GAPPs
​ ROM info
Android version: 10
Resurrection Remix build version: 8.6.4
Android security patch level: November 5, 2020
Vendor security patch level: September 5, 2020
Kernel version: 4.14.141+​
Source
Device Tree
Vendor Tree
Prebuilt kernel
Patches​
XDA:DevDB Information
Resurrection Remix 8.6.4 for realme 6, ROM for the Realme 6
Contributors
LahKeda, TheMalachite
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: ResurrectionRemix
Version Information
Status: Stable
Current Stable Version: 3
Stable Release Date: 2020-11-21
Current Beta Version: 3
Beta Release Date: 2020-11-11
Created 2020-11-10
Last Updated 2020-11-21

Reserved
Code:
[B]21th of November 2020 - Stable 3[/B]
-We are now OFFICIAL
-Fix battery and recovery selinux denials
[B]16th of November 2020 - Stable 2[/B]
-Switch to user build
-SeLinux is enforcing
-Force enable VoLTE icon
-Added charger animation(Still doesn't want to show up xD)
-Enabled ZRAM(but SAWP doesn't work xD)
[B]14th of November 2020 - Stable 1[/B]
-Reserve 2GB on system partition
-Remove prebuilts GAPPs
-Fixed more SELinux denials
-Fix VoLTE
-Add VoLTE icon
[B]11th of November 2020 - Beta 3[/B]
-Switch to OpenGapps nano variant to save space
-Add maintainer info
-Fixed lots of SELinux denials
[B]10th of November 2020 - Beta 2[/B]
-Fixed ADB debugging
-Switch to userdebug build
-Added OpenGapps stock variant
-Added RR wallpapers (they suck xD)
[B]10th of November 2020 - Beta 1[/B]
-Initial build

Reserved
F.A.Q :
Q - Why you mustn't quote the hole post?
A - As you are killing us dude !
Q - Why mustn't I ask for ETA ?
A - Simply , we are students and colleges so we are busy with our studying and other life problems!
Q - Why mustn't you Spam ?
A -Why should you?
Q - I have faced some issues, which is not mentioned in the 'Not Working' list........?
A - For bug reports, the least we can expect from you is a logcat taken during the issue. Or atleast, you could tell us how and when did you face the bug, how can we reproduce the bug to fix it. Reports without any of these will be ignored.
Q - Can I use your ROM/any part of ROM and modify it and release it separately?
A - Yes you can. But please mention proper credits.
Q - I flashed this ROM, but I dont find any Google App, where can I find it?
A - gapps will be mentioned later in OP but you can get them from any where and flash it !
Bug reporting
How to report a bug?
First off all, check the 'not working' list and see if the bug you are facing is already mentioned or not. If it is, stop right away because the concerned people working on the ROM are aware of the issue.
If the bug/issue is not mentioned in 'not working' list, check the Frequently Asked Question (F.A.Q) and see if issue is resolved already.
If the issue you face is not in FAQ either, you would probably post a reply in this forum, and not PM anyone, about the bug.
Attach a logcat.
If not possible, mention a proper way how you encountered the bug.
Also mention any 3rd party stuff you installed. (Like mods, themes, kernels etc)
Following things WILL NOT be considered as bugs. So please do not post such bug reports, they will be ignored.
Low benchmark scores. Even if Stock results better.
Poor performance in gaming. Even if Stock results better.
High RAM usage/low RAM available.
Various kernel control app crashes.
Crashes of various UI elements when a custom theme/mod is applied.
Random reboots, and other issues caused by flashing custom kernel.

Some people requested a permissive SELinux build so here's it https://sourceforge.net/projects/realme6-rr/files/stable3-unofficial/
But be aware that I will not be maintaining this building and it's not official!!!

Thanx
Can you tell me viper4androd is working or not
In huge fan of v4a so please don't mark it as spam

nasir.da.vinci said:
Thanx
Can you tell me viper4androd is working or not
In huge fan of v4a so please don't mark it as spam
Click to expand...
Click to collapse
Try it and tell me

how can i root this room
magisk is not flshing by recovery

amr kaka said:
how can i root this room
magisk is not flshing by recovery
Click to expand...
Click to collapse
You can patch boot.img with magisk manager and install the boot.img through twrp or fastboot
For detailed instructions visit

Is NikGapps core or Gapps pico possible?
Btw, Thanks Dev for making this beautiful custom rom. Appreciate it so much.

amr kaka said:
how can i root this room
magisk is not flshing by recovery
Click to expand...
Click to collapse
I've reserved 2GB on system partition so you can flash it now

Pardon my lack of knowledge about ZRAM.
I'd like to ask, how much amount of ZRAM has been enabled on Stable 2 build (16 November 2020)?

I have installed stable 2 and found to be great so far.
I'll give full review after a week use here

Help bootloop !!
I installed the rom by wiping data and cache then formated data also
Then I installed the rom
First time it booted successfully then I installed the magisk then real problem started and stuck in bootloop
Now i could not format data
Then I searched xda and followed - checked data (in advance wipe) and clicked repair file system ext2 then ext4 - done
But it again bootlooped
Then again i formated and wiped data and cache and installed the rom again bootloop.
Then I again unlocked bootloader and flashed vbmeta and pbrp booted to recovery and installed rom... again bootloop
Please @LahKeda help me I had not backed up in pbrp recovery

nasir.da.vinci said:
Help bootloop !!
I installed the rom by wiping data and cache then formated data also
Then I installed the rom
First time it booted successfully then I installed the magisk then real problem started and stuck in bootloop
Now i could not format data
Then I searched xda and followed - checked data (in advance wipe) and clicked repair file system ext2 then ext4 - done
But it again bootlooped
Then again i formated and wiped data and cache and installed the rom again bootloop.
Then I again unlocked bootloader and flashed vbmeta and pbrp booted to recovery and installed rom... again bootloop
Please @LahKeda help me I had not backed up in pbrp recovery
Click to expand...
Click to collapse
Magisk doesn't work with RR and messes with the bootimage. You should only have flashed the boot.img again it would work without problems.
Does it reboots to Bootloader or stuck on boot animation? If it's stuck ob boot animation try full wiping the storage

I will flash stock firmware (6gb) tomorrow with realme flash tool
---------- Post added at 09:14 PM ---------- Previous post was at 09:12 PM ----------
LahKeda said:
Magisk doesn't work with RR and messes with the bootimage. You should only have flashed the boot.img again it would work without problems.
Does it reboots to Bootloader or stuck on boot animation? If it's stuck ob boot animation try full wiping the storage
Click to expand...
Click to collapse
It just bootloops every other thing works (fastboot and recovery)
---------- Post added at 09:16 PM ---------- Previous post was at 09:14 PM ----------
I doubt there is some problem in this recovery image
---------- Post added at 09:21 PM ---------- Previous post was at 09:16 PM ----------
I comfortably installed the magisk becouse you confirmed in the last post that magisk can be installed in this rom

@LahKeda Please move the status bar's clock a bit left so that the gap/space between the hole punch camera and the clock isn't too much.

givesandwich said:
@LahKeda Please move the status bar's clock a bit left so that the gap/space between the hole punch camera and the clock isn't too much.
Click to expand...
Click to collapse
Nope
I'm not a ROM developer... maybe you can ask RR team for that!

Help a noob
LahKeda said:
Nope
I'm not a ROM developer... maybe you can ask RR team for that!
Click to expand...
Click to collapse
Can you help a total noob here? How do I root this rom?

Make full review of this rom on YouTube plz
It will help people to get trust of this ROM

anyone know how to go back to stock rom ? i tried flashing using realme flashing tool but it i got an error that says ''cannot find central directories'

Related

[ROM][GS2 I9100][LP 5.0.2][18/01/15] Roshnaie-ROM [End of Darkness][BETA]

Welcome XDA friends, Roshnaie-ROM is back with new source build, cm-12.0 based rom for our (Old is Gold) device (Galaxy S2)
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, etc..
Features and Details:
Code:
Device: Galaxy SII
Model: GT-i9100
ROM Version: Beta 1
Kernel: 3.0.101- Apolo-8.0_Beta3
Latest cm-12.0 features
ROM Download Section:
Beta 1 Build #2 (Hit Thanks if i helped you )
Previous Builds:
Beta 1 Build #1
GAPPS Download Section:
Link (Nano Recommended)
Installation Requirements:
- Up to 30% Battery Charge
- Kitkat Compatible Recovery.
Tips and Guide 2nd Post
Change logs 3rd Post
Credits:
- XDA (For all learning and everything)
- CyanogenMod Team
- @Lysergic Acid (For Inspirations)
- @jackeagle @Vivek_Neel (For Great Guide Here and Here)
- @pedestre (For Kernel Here)
- AndroidFileHost (For Hosting)
- Mediafire (For Hosting)
- Github
- @Troubadour666 (For first test and feedback)
- Please PM me if i forgot your name
XDA:DevDB Information
Roshnaie-ROM, ROM for the i9100
Contributors
ab-samy
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Any
Based On: CyanogenMod 12.0
Version Information
Status: Beta
Current Beta Version: Beta 1
Beta Release Date: 2015-01-17
Created 2015-01-17
Last Updated 2015-01-18
Tips and Guide
- Partition your internal memory for better app management, Guide Here Thanks @metalgearhathaway
- Reboot recovery once you wipe then flash Roshnaie-ROM and Gapps.
Flash Guide:
Coming from none cm-12.0 ROM:
Download R-12-XXXXXXX-UNOFFICIAL-i9100.zip from download section and put it on your Sdcard.
Download CWM Kitkat compatible recovery and put it on your Sdcard (Google it).
Reboot to recovery then wipe all data
Reboot recovery (located on Advanced option or reboot option)
Flash R-12-XXXXXXX-UNOFFICIAL-i9100.zip (lollipop ROMs taking a bit longer time during flash and boot than others)
Flash Gapps (Optional)
Reboot.
Coming from cm-12.0 ROMS:
Wipe Cache
Flash R-12-XXXXXXX-UNOFFICIAL-i9100.zip.
Reboot.
Change logs:
Latest CM Change logs on Build #2
-Clear out icon resources for non-composed icons
-AudioFX: materialize
-Improve settings menu
-CMFileManager : Adding mime-type support for audio/amr
-Increase the maximum size for attachments.UnifiedEmail
-Telephony: Fix translatability
-xmm6262: Fix bulding libril with debug enabled.
-LatinIME: Enable Greek spell checking
-LatinIME: Enable spellchecker for additional languages
-LatinIME: Fix dicttool build
-Prevent copyNativeLib of package scanning to reduce booting time.
-SystemUI: Fix system ui crash while continuously click flash light tile issue
-SystemUI: Fix user profile activity overlapped by status bar panel issue
-Stop the StkAppService in multi sim scenario correctly.
-Framework: Fix GSM signal strength
-Settings: Add HighTouchSensitivity support
-Settings: Fix profiles Wi-Fi strings
-Fix "ghost" weather display in expanded status bar
-and much more....
Thanks @ab-samy
coming from Validus with Apolo Beta3 , flashed and booted fine .
realy thanks for 1rst rom with Theme Chooser integration
One more ROM to try is always welcome! Thank you!
I see you can customize tiles here, am I right? Also, how's the camera app behaving?
list
Do we have a very basic, working not working lst gentlemen
Wow Another ROm for our Old S2....Thanks Devs!
nice to see
eminem_b said:
I see you can customize tiles here, am I right? Also, how's the camera app behaving?
Click to expand...
Click to collapse
RenX10 said:
Do we have a very basic, working not working lst gentlemen
Click to expand...
Click to collapse
We all know HD Video recording not working on stock camera
Features?
Thanks for the ROM. Would be nice to see what features this ROM adds beyond CM12... Is there such a list? The list in the link to this ROM is for JB 4.1.2 and is very old...
So its practically the same as cm12..awesome
it's keep rebooting into recovery !!!
i flashed the Kitkat Compatible Recovery.
and then rom
but still reboot into recovery !!!
ab-samy said:
We all know HD Video recording not working on stock camera
Click to expand...
Click to collapse
Hi mate! Nice to see your new ROM for S2!!!
I'm about HD 1080 record : yeah it's known CM code not fixed yet.
I extracted from Spirit Rom 1.7 KitKat and put into system folder with similar permission and everything works perfectly! Maybe it's have some solution for your next update!? Just for info! Using RR 5.2.9 latest!
Thanks!
mahaseno said:
it's keep rebooting into recovery !!!
i flashed the Kitkat Compatible Recovery.
and then rom
but still reboot into recovery !!!
Click to expand...
Click to collapse
Do clean install
ab-samy said:
Do clean install
Click to expand...
Click to collapse
i did
but still rebooting into recovery
Good initiative
i like this
you can't work with Lysergic Acid For add this Features For CM12 rom's ?
شکریہ
ZaFaR97 said:
Good initiative
i like this
you can't work with Lysergic Acid For add this Features For CM12 rom's ?
شکریہ
Click to expand...
Click to collapse
Witch features? this rom already has latest cm-12.0 features.
mahaseno said:
i did
but still rebooting into recovery
Click to expand...
Click to collapse
Make sure you have downloaded the rom correctly and also flash an stable CWM Kitkat compatible recovery, already tested by me and some others it working, and also search for lollipop roms requirements related guide.
same here
keeps booting back to recovery with CWM KK compatible (coming from 4.1.2JB rom)
so I flashed Apollo Beta 3, reboot recovery and flashed from there and just now it finally booted.
my experiences so far
- SCR 5 Lollipop recorder works ( it doesn't work w/ CM12 unofficial but works with RR lollipop)
- FX File manager doesn't show double entries of Phone and SD storage ( on CM12 unofficial and RR lollipop it shows double of each storage). So probably I wont get double list of media files in PowerAmp, MX player etc when I install them later.
- SimToolKit works ( I tested inquring load balance from my sim. Never got it to work w/ CM12 and RR Lollipop. it just loads and exits but I never get the reply messages from my network)
more to follow as I play with it later.
edit - Simtoolkit is not properly working. Now I get "invalid reqest format. cannot be processed" messages when requesting load balance. cannot call customer care access other SIM features. only Phonebook and inbox storage selection seems to be working.
janhenz said:
same here
keeps booting back to recovery with CWM KK compatible (coming from 4.1.2JB rom)
so I flashed Apollo Beta 3, reboot recovery and flashed from there and just now it finally booted.
my experiences so far
- SCR 5 Lollipop recorder works ( it doesn't work w/ CM12 unofficial but works with RR lollipop)
- FX File manager doesn't show double entries of Phone and SD storage ( on CM12 unofficial and RR lollipop it shows double of each storage). So probably I wont get double list of media files in PowerAmp, MX player etc when I install them later.
- SimToolKit works ( I tested inquring load balance from my sim. Never got it to work w/ CM12 and RR Lollipop. it just loads and exits but I never get the reply messages from my network)
more to follow as I play with it later.
Click to expand...
Click to collapse
100%
it's booting now

[CPN3/Lite][VoLTE]MIUI PRO 9.2.1 [Updated]

MIUI PRO 9.2.1
Ported directly from Redmi Note 4 Mtk
1ST BOOT TAKE ALOT OF TIME ABOUT 15-20MINS. PLEASE TAKE A TEA BREAK WHILE IT BOOTS
CREDITS:
 @Aryan raj
@tEaM PC
@chalapathi
@bhuwaneshwaran Vasu
@kuber Sharma
@Irma Nasre
@tEaM WIN
@కె. వేణు
@Uday Hegde
@Rock Roc (For enlightening my urge to port MIUI rom)
@everyone looking forward to use this Rom
@Let me know if i missed anyone
Some of the features :
*Pre-rooted with Magisk
*Fully Deodexed
*Spectrum support
*Google Assistant
*Wallpaper carousel fixed
*Fast charging tweak
*Battery mAh corrected
*Flight mode bug fixed
*Custom boot animation
*Factory text removed from boot screen
*Custom boot screen [Coolpad removed]
*Headphone & audio settings FC fixed
*Low sound fixed
*Face detection unlock
Many more
IMPORTANT NOTE
*Do not update Magisk manager and don't flash any safety net patch.
*Do not update MIUI software.
*If VoLTE doesn't show up don't worry go to Settings>Simcards & mobile network>VoLTE enabled toggle it once. Activate data roaming if you're in roaming network.
*I'll ignore you're comments if:
-quoted the whole OP post
-silly questions and error done from your side
Installation Instructions Read Carefully :
COOLPAD NOTE 3 USERS:​
*Boot to any marshmallow recovery
*Wipe Cache, System, Dalvik, Data
*Flash Rom
*Wipe dalvik cache
*Reboot
COOLPAD NOTE 3 LITE USERS:​
*Boot to any marshmallow recovery
*Wipe Cache, System, Dalvik, Data
*Flash Rom
*Flash Porting script
*Wipe dalvik cache
*Reboot
Bugs:
*Audio setting headphone click makes settings fc (But ear phone works perfectly)
*Double tap wakeup
Download Links
MIUIPROV9.2.1updated_Akky.zip
PC kernel for Cpn3
Dolby Atmos
Porting script for Lite Users
Youtube
XDA:DevDB Information
MIUI PRO 9.2.1 MT6753, ROM for the CoolPad Note 3
Contributors
akky26
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.x
ROM Firmware Required: Marshmallow Recovery
Based On: MIUIPro Redmi Note 4 MTK
Version Information
Status: Stable
Stable Release Date: 2017-12-30
Created 2017-12-30
Last Updated 2018-01-05
Reserved
Reserved
It works very nicely, thanks. Please see if you can port with naugat or oreo.
Thanks akky26, this one too working well including headset settings.
reboot problem
My mobile reboot automatically at least two or three times a day after flashing this rom. Please suggest solution on this problem.
BBC777 said:
It works very nicely, thanks. Please see if you can port with naugat or oreo.
Click to expand...
Click to collapse
Till now, I have not face any issue on my CPN device except bug which was mention on forum,
but double tab wake option working for my device, either you disable or enable but it's
working.
Are you planning to port this with naugat or oreo?
HARISHFIRKE said:
My mobile reboot automatically at least two or three times a day after flashing this rom. Please suggest solution on this problem.
Click to expand...
Click to collapse
Use Partial wakelock app from gplay store and set its settings to Partial wake.
BBC777 said:
Till now, I have not face any issue on my CPN device except bug which was mention on forum,
but double tab wake option working for my device, either you disable or enable but it's
working.
Are you planning to port this with naugat or oreo?
Click to expand...
Click to collapse
Double tap bug is when you use any other kernel that doesn't supports it, as mentioned in OP d2w bug in PC kernel
Nougat and oreo roms lack VoLTE support that's why not planning to port it now.
Settings not working
I flashed the phone with your ROM. After everything is completed, I am not able to use the Settings in the phone.
I receive this issue.
"Unfortunately, settings has stopped"
Can you help me to fix this issue.
Thanks in advance.
akky26 said:
MIUI PRO 9.2.1
Ported directly from Redmi Note 4 Mtk
Read the installation instructions before flashing
Note if VoLTE doesn't show up don't worry go to Settings>Simcards & mobile network>VoLTE enabled toggle it oonce. Your'e done.
1ST BOOT TAKE ALOT OF TIME ABOUT 15-20MINS. PLEASE TAKE A TEA BREAK WHILE IT BOOTS
CREDITS:
@TEAM PC
@Chalapathi
@Bhuwaneshwaran Vasu
@Kuber Sharma
@Irma Nasre
@TEAM WIN
@కె. వేణు
@Uday Hegde
@Rock Roc (For enlightening my urge to port MIUI rom)
@Everyone looking forward to use this Rom
@Let me know if i missed anyone
No need to flash any safety net patch or magisk on the rom. Don't upgrade the magisk.
Features:
Stable VoLTE
Magisk safety net working stable
Double tap sleep
Notification led fixed
Flight mode bug fixed
Custom animations
Face detection unlock
Dolby can be flashed if you need
PC kernel recommended for better battery backup and fixing incoming call bug
And many more
Installation Instructions Read Carefully :
COOLPAD NOTE 3 USERS:
*Boot to any marshmallow recovery
*Wipe Cache, System, Dalvik, Data
*Flash Rom
*Flash FP patch
*Note 3 users flash pc kernel (to avoid jio reboot bug)
*Wipe dalvik cache
*Reboot
COOLPAD NOTE 3 LITE USERS:
*Flash Porting script
*I dont have Note 3 lite but i guess you don't need to flash other kernel for better performance. Some one pls upload Note 3 lite users instruction after installing it for ease.
The Rom comes with Team zero Kernel to prove rom has double tap wakeup Option, On the other hand it has incoming call restart bug.
For good battery backup use PC kernel
SO I RECOMMEND TO FLASH PC KERNEL.
Bugs:
*Audio setting headphone click makes settings fc (But ear phone works perfectly)
*Double tap wakeup bug in PC kernel
Links:
Rom
https://drive.google.com/open?id=1HNbvLaKHBTLVsalfXASmklIqJgOD6FcT
FP patch
https://drive.google.com/file/d/1lie_oYvd3Z9Bz_5BpBIlot1nXT8TEgs0/view?usp=sharing
PC kernel
https://drive.google.com/file/d/1ewU8hXf0_T4d-__SRn9cMZMwvfbdBeCY/view?usp=sharing
Dolby
https://drive.google.com/file/d/190OZo9prHOpopoFQxR4nSTLVVtTXaLoV/view?usp=sharing
Porting script for Lite Users
https://www.mediafire.com/file/7taro1829cj6mp2/Rom_Porting_Script.zip
Youtube
XDA:DevDB Information
MIUI PRO 9.2.1 MT6753, ROM for the CoolPad Note 3
Contributors
akky26
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.x
ROM Firmware Required: Marshmallow Recovery
Based On: MIUIPro Redmi Note 4 MTK
Version Information
Status: Stable
Stable Release Date: 2017-12-30
Created 2017-12-30
Last Updated 2018-01-05
Click to expand...
Click to collapse
rajesh_kodees said:
I flashed the phone with your ROM. After everything is completed, I am not able to use the Settings in the phone.
I receive this issue.
"Unfortunately, settings has stopped"
Can you help me to fix this issue.
Thanks in advance.
Click to expand...
Click to collapse
Please don't quote the whole OP , kindly give me details which device you have flashed on and what was the previous rom you were using before flashing, just to mention clean flash is always recommended.
Settings not working.
I flashed coolpad note3 which was in
coolui 8,
build no v022,
model number CP8676_I02,
Android version 6.0
Hope this helps.
rajesh_kodees said:
I flashed coolpad note3 which was in
coolui 8,
build no v022,
model number CP8676_I02,
Android version 6.0
Hope this helps.
Click to expand...
Click to collapse
I request you to clean flash the rom. Wipe system, cache, dalvik and data. Just to mention headphones and audio settings option gives fc in old version
Thank you very much for this awesome ROM. Much awaited for a stable VoLTE in MIUI.
One little thing. Google drive is not allowing to download Dolby Atmos. It throws the error "Sorry, this file is infected with a virus
Only the owner is allowed to download infected files." Can you please provide mirror link in some other host sites?
GKarthee said:
Thank you very much for this awesome ROM. Much awaited for a stable VoLTE in MIUI.
One little thing. Google drive is not allowing to download Dolby Atmos. It throws the error "Sorry, this file is infected with a virus
Only the owner is allowed to download infected files." Can you please provide mirror link in some other host sites?
Click to expand...
Click to collapse
Download dolby from magisk modules
Hello with this rom, do we have to flash team-pc-kernel-note 3 too?
BBC777 said:
Hello with this rom, do we have to flash team-pc-kernel-note 3 too?
Click to expand...
Click to collapse
No its optional. The rom comes with zero addition v2 kernel. Flashing Team PC kernel is optional. It is recommended not to flash any other kenel on the rom. Keep zero addition kernel v2 only which comes with rom itself.
Nice
akky26 said:
No its optional. The rom comes with zero addition v2 kernel. Flashing Team PC kernel is optional. It is recommended not to flash any other kenel on the rom. Keep zero addition kernel v2 only which comes with rom itself.
Click to expand...
Click to collapse
Thanks!!!
After Install this rom... Setting foes not open it shows "Unfortunatly Setting has stopped" Any solution for this
Mini 9.2.1for colloid note 3 lite
After installation as per your instructions...
Everything is OK.
But setting does not work
And restarting
Before used custom Rom
1, ambio
2. Alpha
3.miui pro 9. (setting problem occurred )
Tell me how to solve setting issue

[RMN4X Mido] EpicRom 8.7.6 Mıuı 10 Multılanguage {Epic Team}

Greetings MIUI-ers !!!
Épic ROM The creators of Jamflux, Pocarropa and MrRaines (Toomatico in Miii) are pleased to offer Épic ROM for the Xiaomi RMN 4X due to their intensive work. Epic ROM is a ROM specific to MIUI, but you can see some features, enhancements and parts.
This ROM-oriented production of many fashion models improves the official MIUI store and transforms Xiaomi into a larger MIUI-ers family! Not EP MIUI DEVICE TEAM ROM was born a year ago at HTCMANIA (Spain forum)! D. <
MIUI DEVICE TEAM is doing an incredible work on other issues Thank you guys for your work! And all Xiaomi members and en.miui Smods / Admins / Mods translation: Thank you for all your support and help!
FEATURES:
* MIUI 10
* Multilanguage
* Global closed beta version 8.7.3 build
* Unnecessary google applications removed
* Unnecessary Chinese applications removed
* Full deodex rom
* System framework services.jar patches
* Bot.img dm has been removed
* More ram for miuisystem patch
* Ota settings added
* Magisk 16.1 rot installer
* Dolby atmos
* Added wallpaper daily
* Rot explorer, titanium backup, WeatherM8, snaptube, smartkeyboard MIUI, Adaway
* and I can not count ....
Your device has Bootloader Locked on, TWRP Recovery is installed, and USB Debugging should be turned on ...
Be sure to get Full Nandroid Backup before installation ....
SETUP:
Download the Epic ROM and transfer it to internal memory.
Start your device in TWRP recovery mode.
In TWRP recovery, click Wipe »Advanced Wipe and delete everything except local memory.
Return to the TWRP main menu, touch Install, and in Step 1 select the Epic rom Zip file to which you are transferring your device.
Once you have selected the .zip file, do a Swipe to Confirm Flash. At the bottom of the screen to start the custom ROM installation process. This may take some time.
Once your ROM has been successfully loaded, run Wipe cache / Dalvik and restart your device.
INFORMATION:
My Lecture on the subject Redmi Not 4X My device was tried on 05.07.2018, it was confirmed working and added to the subject. Something that works on me may not work for you.
It is Your responsibility to properly and fully implement all expressions contained in the Site, and you are responsible for any problems you may have due to Your lack of the above-mentioned Features.
Subject en.miui.com belongs to all members, and the right to organize and belong to me. You just need to let me know about the information you want to add or edit
Credits:
en.miui.com
Jamflux
MrRaines
Pocarropa
Donate me / Donate
https://www.paypal.me/br996
You can follow us in the telegram group
https://t.me/joinchat/DNBy0j-BH4KQ_N78vr-jsw
Download EpicROM Mıuı 10 8.7.6
https://androidfilehost.com/?fid=5862345805528041143
XDA:DevDB Information
EpicRom, ROM for the Xiaomi Redmi Note 4
Contributors
Escobar 1945, @pocarropa
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: bootloader lock is on
Based On: MIUI
Version Information
Status: Beta
Current Stable Version: Beta
Stable Release Date: 1969-12-31
Current Beta Version: 06.07.2018
Beta Release Date: 1969-12-31
Created 2018-07-06
Last Updated 2018-07-06
Thank you so much. I was waiting for this.
any way to have google camera?
camera2api in build prop does not work
The bootloader must be locked or unlocked? I ask because the prerequisites say "Your device has Bootloader Locked on".
What languages ​​are included thanks
lucainno said:
What languages ​​are included thanks
Click to expand...
Click to collapse
Italian ?
---------- Post added at 11:13 AM ---------- Previous post was at 11:12 AM ----------
Amazing works, it works great. Keep going with the good work.
Noor Islam:
First of all I want to thanks
Escobar1945
for this wonderful miui10 build
You added portrait on miui camera which doesn't shoot photos like portrait mode.
Please let's us know how it's works.
The following blog post may be helpful to anyone interested in using this ROM as a personal daily driver:-
https://mymidiary.blogspot.com/2018/07/epicmiui10hmnote4x876global70-rom-by.html
Kind regards.
Are indonesian language include?
And gcam work?
Thanks
Sent from my Redmi Note 4 using XDA Labs
Rangky_AM said:
Are indonesian language include?
And gcam work?
Thanks
Click to expand...
Click to collapse
Indonesian is included since it is a multilingual ROM.
According to a fellow user of this ROM Gcam works better than the default app.
Gcam not working, black screen
Video in gcam app force close
can it be dirty flashed over previous build ?

Jesvi Oreo Rom V1.0 -C7 PRO- [25.12.18]

Jesvi Stock Oreo Rom ​
Yes , This Rom Can Be Used For Further Development Purpose But PM Me And Don't Forget To Mention My Name In The Credits . ​
Disclaimer
I am not responsible for bricked devices, dead SD cards, or any malfunction caused due to carelessness . Follow the steps twice or thrice before installing the ROM ! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you ! But if this works and you are satisfied, then I will claim all the credits without leaving one !
Main Aim Of This Rom
It is for further development purpose and modification by keeping this as the base rom .
It is also intended to be a convenient user back up rom so that users can revert back to jesvi stock rom if any problem occurs, instead of flashing stock firmware via odin .
Rom Features
Oreo Rom
Stock/Base Indian firmware
Magisk rooted & busy box installed
Has an fully permissive kernel so that user can have full access
Su.d, Int.d & Dm-Verity patched
Tweaked Ramdisk
For development and user backup purpose
Fully DEODEXED rom featuring further themabilty and customization
Tweaks for working shealth and screenmirroring
Twrp internal storage fixed , So now , backup can be taken and stored in internal storage
Contains all stock features and gives full access to user
1 Dec 2018 patch level
Steps For Installation
Make sure you have the latest TWRP recovery installed
For more information on how to install latest Twrp for c7 pro follow the steps mentioned in this thread -
https://forum.xda-developers.com/android/development/recovery-twrp-3-2-1-c701f-ds-t3802911
Download rom and transfer it to your external sd card
Jesvi stock oreo rom v1.0 (2.4GB) available to download from this Gdrive -
https://drive.google.com/file/d/1unroMdUAv5b-ePK9LpPW5ylj330coUGq/view?usp=drivesdk
Make sure OEM is unlocked in developer settings
To unlock OEM , Go to (settings/about phone/software information) and tap on "build number" 4 times , then go back to settings and you will see "developer options after "about phone" . Click on "developers option" and you will see and option called "OEM Unlock" select/turn that on .
Make sure you have at least 50%+ battery left
Boot your phone to Twrp recovery
IMPORTANT STEPS TO AVOID ("SYMLINKS FAILED" / "ERROR : 7") WHILE FLASHING THE ROM
Do a FULL wipe : Dalvik Cache, Cache, Data, System
If you come from a Stock Rom , then *YOU SHOULD FORMAT DATA*. (due to partition encryption)
Drop "Jesvi_Stock_Oreo_ROM" to SDCARD
UNPLUG your device from computer
Select SYSTEM and DATA in Mount (TWRP/MOUNT/SYSTEM,DATA,ETC)
Reboot to recovery once again Via TWRP (TWRP/REBOOT/RECOVERY)
Locate "Jesvi_Stock_Oreo_Rom" in the location where you have kept it and install it (TWRP/INSTALL/<location where the rom is>/SWIPE TO INSTALL)
First boot may take some time (10-15 min)
DO THIS STEP
During first boot , it may lag/hang for the first 2-3 min , then a reboot after first boot would make it butter smooth
BUGS -
None
(If any , please report it with the logcat and with additional information)
Supported Variants
Currently Only SM-C701F AND SM-C701F/DD
I am ready to add additional variants support *BUT I NEED YOUR HELP* for testing the rom and sending some required files
(PM Me if you want to add support for your device)
CREDITS -
@jesvi For Creating This Entire Rom :victory:
https://forum.xda-developers.com/member.php?u=9579368
@corsicanu For Shealth / Smartcast fix and tips :highfive:
https://forum.xda-developers.com/member.php?u=4658360
@vinayak For TWRP Internal storage Fix :highfive:
XDA:DevDB Information
Jesvi Oreo Rom V1.0 -C7 PRO- [25.12.18], ROM for the Samsung C9 Pro
Don't Forget To Hit That Thank Button :good:​
Contributors
jesvi
Download Jesvi Oreo Rom v1.0: https://drive.google.com/file/d/1unroMdUAv5b-ePK9LpPW5ylj330coUGq/view?usp=drivesdk
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest twrp recovery , rom & latest bootloader
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2018-12-25
Created 2018-12-25
Last Updated 2018-12-25
Reserved
Reserved
Hey dude, are you sure you've made the development thread in the right place? You mentioned the C7 Pro device, but here is the C9 Pro thread. :cyclops:
TPD-21 said:
Hey dude, are you sure you've made the development thread in the right place? You mentioned the C7 Pro device, but here is the C9 Pro thread. :cyclops:
Click to expand...
Click to collapse
Yeah bro , it's because I can't create a rom in c7 pro thread or in other words there is no c7 pro thread in xda , I had no choice but to post it in c9 pro's thread .
I would love if anyone moves this thread to c7 pro "Rom Thread"
Duplicate thread already exists.
Please continue the discussion there - https://forum.xda-developers.com/android/development/jesvi-oreo-rom-v1-0-c7-pro-25-12-18-t3882685
Thread closed.
Camo.
XDA Moderation Team

[ROM][beryllium] OxygenOS [9.0][OP7 Pro Port][V2 UP]

The title says it all!!!
Oxygen OS port from OP7 Pro
What works:
Almost everything, check bugs!
How to Install:
Download the ZIP
Flash any pie vendor of your choice
Wipe data,System,Cache
Flash ZIP, Please Note that you may see a failed to mount /vendor msg on TWRP it is alright
Reboot to system
Optional - Install DFE if required as it is not included.
Install Google Play Services [or else play store will not work]
If bootloops install permivisser by erfan
Credits
@codeElixer - for your amazing ports!, We miss you buddy!
@Erfan - As always chief hats off to you!, This port was made possible thanks to you and your Tools!
Bugs
Face unlock[You can use google's smart unlock]
incorrect battery capacity detected
In certain cases the device freezes up in sleep
Dynamic vibration/Haptic Feedback
Ambient Display
Note: Backup Your stuff. I AM NOT RESPONSIBLE FOR UR DATA
Note 2: THIS IS A SGSI BUILT FROM SCRATCH WITH ERFAN'S TOOLS
XDA:DevDB Information
OxygenOS, ROM for the Xiaomi Poco F1
Contributors
shazzy1
ROM OS Version: 9.x Pie
Version Information
Status: Testing
Created 2019-06-08
Last Updated 2019-06-15
Download
You can download the latest build from AFH or MEGA
Changelogs V2:
* Fixed Thermal issues
* Fixed battery drain issue
* Flashable ZIP
* Made some under the hood optimizations
* Compiled from OP7 Pro firmware thanks to erfan's tool
* Fixes made using OP6t Beta 10 firmware
Chnagelog v1:
* Initial Build
* Fixed vibration
For instant updates and queries join our Telegram community
:good:
2.3.X Gingerbread, really?
Cool:cyclops:
Thanks for picking OOS.
???
Thanks for bringing the it back.
Thank you for bringing OOS, I still have the latest beta installed, downloading this new one, thank you very much
thank you brother
Downloading right now, THANK YOU BROTHER... and please Dev don't mind what some nitwit users might be commenting.
Many times am searching oos for poco.
Thanks for developer for handling oos
Wow. Will try this one. Waiting for feedbacks.
Anyways thank you for this.
Sent from my POCO F1 using XDA Labs
is a built-in vibrate mode in Quick Settings possible?
I had couple of doubts
1. On OP6T OOS port Dev said faceunlock is not working but I was able to do it via smart lock so can I do it via smart lock?
2. Can I dirty flash on OP6T OOS?
Sent from my ONEPLUS A6010 using Tapatalk
Does faceunlock work via smart Lock?
Install ROM
How install the Oxygen ROM?
1.Boot to Recovery
2.Format Data
3.Reboot to Recovery
4.Full Wipe
5.Restore the Zipfiles in Recovery
6.Reboot
Thats OK?
Regards
0_RoXoR_0 said:
I had couple of doubts
1. On OP6T OOS port Dev said faceunlock is not working but I was able to do it via smart lock so can I do it via smart lock?
2. Can I dirty flash on OP6T OOS?
Sent from my ONEPLUS A6010 using Tapatalk
Click to expand...
Click to collapse
JosephXDA1 said:
Does faceunlock work via smart Lock?
Click to expand...
Click to collapse
Yes, Smart Lock is working

Categories

Resources