Fixing Xiaomi note 10 without OS - Xiaomi Mi Note 10 Guides, News, & Discussion

So I recently tried to unroot my device with flashing official ROM on it. Apparently I used the wrong file because my phone got bricked. I tried using XiaoMiTool by Francesco but it didn't help. I spent a lot of time trying to fix it so ill post what worked for me. I downloaded a lot of ROMS but none of them worked for me there was either flash error or device mismatching and I couldn't find right flash official software anywhere. I downloaded another ADB fixing program which worked, I downloaded Szaki/XiaomiADB fastboot tools which worked perfectly. I simply connected my phone searched for my phone code name (tucana) downloaded ROM from there, wiped all data off and finally flashed OS on my device. I also have a question, are there any android software fixing programs for phone repair companies or something similar?
Have good day and stay healthy,
MX8MC8

id suggest to unbrick with mi flash tool.
I did that always when i was stuck on something, it ofcourse removes your data but saves the device so its still the profit probably... After succesfull rom installation you can flash again.
Also you do this in fastboot mode

When I was stuck in the same way the solution I found was to flash whatever rom then when the phone bootloops, go into recovery, and format data. Afterwards it will boot to startup screen and take forever to load up. Anyway that is my solution, before that I would have to flash stock recovery to boot for the first time then flash a custom recovery back.

Related

[Q] TWRP bootloop

While I did find a similar posts, they were for different devices. I also tryed to search o different sites for similar problems to no avial.
What Happened: After backing up system data and app data then removing Foxhound ROM with factory reset, and installing UltimaROM i came to find that the modem did not install correctly result in no connection to my cell network. I booted into TWRP recovery to try and do a re-install of the ROM only to find that TWRP was restarting itself every 3 seconds or so. I attempted to restart the device which i found to result in a TWRP bootloop that i cannot get out of, it constantly is booting into recovery mode and i cannot get it restart the OS.
What I've tried: Since i can get into download mode i decided to attempt to re-install TWRP using Samsung Galaxy S3 Toolkit but since i do not have USB debugging on i cannot do that. I'm mainly looking for a fix before i go and claim it on the warranty saying update went bad or something. If people need more information I will try to provide it as best i can.
Summery if i confused people is that TWRP is in a bootloop, i am unable to get to the OS, but i still have download mode available.
I fixed it but not how I would have liked to. I ended up losing all data due to flashing stock ROM using ODIN. I would still much appreciate a alternative method that does not involve loss of data though just for future reference, that is if anyone knows a alternative method.
Sent from my GT-I9300 using xda app-developers app
could've tried reflashing TWRP or any other recovery through odin
I have an LG Optimus Q (LGL55c) with twrp loop. I was trying to go back to stock rom, instead I deleted all the system files in twrp when it was working...Then I rebooted back into recovery and get the loop. Does this mean I completely bricked my phone? I tried using adb, adb shell doesn't work. It does find the device. Even tried the LG update with no sucess Any ideas or suggestions?
I just read the forum title, I thought this was for the Optimus Q not the Samsung S3. Sorry mods
Temasek unofficial cm12 5.02
I was running this rom when my power button shorted and I got it replaced but then I tried to do a complete wipe and clean flash but since then it has been twrp bootlooping, tried to flash the latest recovery through Odin but still doesn't work also tried stock firmware flash but says binary not available.
This is my secondary device and I've not been in touch with Odin for a while. Any help will be appreciated.
Thanks
Download latest firnware from sammobile.com and flash it with Odin, as described on sammobile: does Odin finish with '1 succeeded'?
I'm in a very similar situation, but with my Samsung Galaxy Note 2 (N7105). It's rooted, and I am, or was using TWRP 2.7.0.2. ROM is CyanogenMod 12, 5.0.2 Lollipop.
I did a factory reset from INSIDE Android, and chose to wipe internal memory. Phone did the reset and wipe, rebooted into TWRP instead of Android, and now I have TWRP boot loop.
I posted more about it here: http://forum.xda-developers.com/showpost.php?p=60247503&postcount=3671
I have the Problem toooo!
What must i do Now!
with my S3 is the same!!!
For posterity:
With an old (2014?) version of TWRP and a custom ROM, I tried reverting to factory settings. That caused the phone to reboot TWRP, and the screen would flash every couple of seconds. I flashed a stock recovery image I found on Google, and when it restarted again, the wipe was completed successfully. My intention was to wipe all user data anyways so I can't say if this method might save it.

After several tries still in bootloop - HTC One X

Hi Community,
I have a massive problem and I hope you can help me.
I rooted my HTC One X successfully and tried to flash custom roms on it which kind of worked. I put the zip folder on the internat sd card and flashed it without flashing the boot.img.
Finnaly I found out to do that, flashed the boot.img but while installing the ROM the problem code/status 7 appeared and I had to restart the phone in order to put the right rom onto the phone, which i had on my computer.
But while booting, the phone just got stuck in bootloop showing the HTC logo.
I already tried quite a lot of stuff to rescue my phone, for example to restore the nandroid backup - didnt work, flash another backup onto phone - still bootloop, flashed a new rom with boot.img - still bootloop.
The only solution i could find was to unroot the device and flash the stock rom onto it.
Is that really my last resort or is there another way?
Thanks for your help.
I just saw that I posted it in the wrong forum. If a admin could please replace it, i tried to delete it but it didn't work.
Sorry for the inconvenience.

[Q] I am about to give up. There must be a solution but I cant find it

Hi everyone
My sister updated her MEGA OTA last month. She cant remember which version she was on. I am assuming it was 4.3. shes doesnt know much,
Her phone got stuck in bootloop.
Initially a got a hard time even getting into restore mode. however after a lot of goggling and trials and errors here is where i am today :
1- I can install TWRP and/or Philz recovery and boot into them.
2- I can enter download mode
3- I have tried installing many ROMS and different versions. I was only partially successful with 4.4 versions because I get a passed message in Odin however upon restart the phone enters boot loop again.
4- I have tried multiple wipe data/dalvik cache/cache and restoring factory settings but i still get the same results.
5- Only in Philz recovery i can mount the external SD card and copy zip files. I was able to root the phone that was (but im not sure if it still is). However all ROMs zip files I tried to install (both from PC and from extSD card) wouldnt open in recovery mode.
Because I get a passed message when I install a ROM from Odin , I dont know what the issue could be. But there is something wrong that happens as soon as this phone boots up.
I seriously do not know what to do anymore. I just need this phone to be working again. At this point I dont care about warranties/ROM versions/stock or custom...
Please help and sorry for my bad English
It sounds like you need to download the stock rom and flash it in Odin (you gotta put the phone in download mode to flash in Odin). The stock rom can be found on the sammobile website in the firmware section. That should get you back to square one (stock rom, stock recovery, no root). Then you start over from scratch.
Sent from my SGH-M819N using XDA Free mobile app
Thanks
I did and I still get the same problem.
In fact after installing stock rom, i could not enter "stock" so I installed philz recovery, logged in philz and wiped cache a couple of time, did a factory reset.
and yet when i restart , the phone is stuck in bootloop.
Maybe she has a Galaxy Mega with a repaired screen. Starting with 4.4 Samsung only supports a digitizer with Synaptics brand chip. It's a big mess and there are countless screens and digitizers made worthless. I think unofficial 4.4 by Cyanogen and others might work, but not official Samsung. With some Galaxy Megas you get a bootloop. With others it boots however the digitizer and touch functions no longer work. I don't know how to go back after you are on official 4.4 because last I saw, there was no root for it. If I'm wrong, someone else please clarify and continue to help.
IMHO only one way out from such situation is try to flash MegaFire MJ2 which is derived from stock 4.2. It's only one 4.2 ROM which can be safely flashed onto KK.
Iformation about MegaFire you can find HERE

[Q] how to hard brick phone wt19i

hello everyone
I would like to permanently hard brick my phone wt19i...... I tried everything from flashing other phone's rom, kernel and recovery. Tried using rom manager too, but nothing worked. As soon as I flash stock gb or stock ics, the phone comes back to life again.
Please if someone could suggest a working method so that even the service centre guys won't be able to fix.
Why would you want to do that
Easiest way would be to physically mess up the chip, shorting something or so.
Sent from my SM-N9005 using Tapatalk
How to short something in hardware.....all I found by searching was flashing improper things.....but each method failed....as soon as to confirm hard brick I tried to flash stock rom it flashed normally and booted too
anikanu said:
How to short something in hardware.....all I found by searching was flashing improper things.....but each method failed....as soon as to confirm hard brick I tried to flash stock rom it flashed normally and booted too
Click to expand...
Click to collapse
have Xperia Mini St15i rooted unlocked bootloader. Running on CM 11.0 very well
but I recent update to latest build 24072015 and I can't boot my phone; after I tried to restore my old backup,tried to install old Rom which is( I installed in past successful)l and tried flash Xperia mini stock rom ftf (various version) but phone doesn't start can say hard brick.
I can install all of them successfully but phone does not start. always displays error of "unfortunately the process com.android.phone has stopped and phone restart on boot logo again and again.
update......
I recently flash BeanStalk-4.4006-20131128-smultron and after many tries I success to start phone but I noticed that in apps only 50 MB memory is free. I didn't have installed any app. in past I have there is about 370 MB free.(xperia mini has 420 mb data partition)
I have try to erase system,data with fastboot but nothing happens
I attached text file of fastboot commands.
I tried to flash sony origional firmware too but it only restarts again and again .
I have tried to erase system and userdata with fastboot but i see that it encountered bad block in erase data, I can't understand why data partition can't be formated ? text document attached
I think my data partition is full. after reboot in recovery there is an error of " no space left in device " phone does not start normally. I can boot in recovery but still can not use phone .
running on CM 11 and this problem is start on flashing cm-11-20150723-UNOFFICIAL-LegacyXperia-smultron. after that my phone doesn't start.

Factory Reset + Wipe System = Am I screwed?

Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM (Eastern Time): I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
RyokoOnXDA said:
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM: I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
Click to expand...
Click to collapse
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
I managed to get into recovery. I don't know how to flash Android 7.0 for my Aristo, though.. so I'm researching it.
EDIT: Got a ROM flashed. Everything working now.
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
Sent from my LGE LM-X220 using XDA Labs

Categories

Resources