USB problem - MTCD Hardware Development

Hello,
I have a dasaita px5, only the single usb cable work but only with pendrive, all other device, like dab+ carplay dongle dosen't work. I already check all pin connectiion from som and motherboard and they are good.
From factory setting i put this command abdon - abdoff, pendrive stop working.
What can i do?
Thanks

here is a log file of my unit after reboot

sorry i have txt file but i can't attach

Related

[Q] USB host?

When you plug a USB thumbdrive to the phone, it first recognises the drive name but doesn't show any options to use it (even in file manager).
Maybe it's due to the connection type (MTP only)...
Any ideas?
Can you access your files in your USB thumbdrive using the file manager?
I'm using Astro Manager to access, and play my video files directly from the USB thumbdrive.
In fact, I just realised I can access if I keep pushing the cable to the phone... Maybe the cable connection isn't that good. I'll buy a new one.
New mission will be to enable wake using volume key which might be more difficult...
Thank you for your answer!
On my tablet , I use USB host ( full usb connection ) , which means I can plug in a pen drive , keyboard , mouse etc...
Can I do this on the Xperia S ???
With a micro usb adaptor I assume ??
Just found a Vid : The answer to my question is yes !
http://www.xperiablog.net/2012/03/09/xperia-s-usb-otg-demonstrated-video/

[Q] how to enable usb host mode if deviceis not rooted or if rooted

[/Bhi i have a very common but strange problem i am mentioning below plz any good solution will be appritiated
1) i have chinese phablet mtk8389 hd89 dual sim, 1gb ram, gps,quadcore, wifi,bluetooth,and microusb port
problem is that if i connect it to any otg or usb cable to connect with computer it dont show any response but just start charging
then i find oht a solution that i need to fix a file insode android system/etc/permissions name of file android usb host .xml
i go to file and add the file but actually file not get added even i cannot edit any system file because i dont have permission
then i find out that for doing that i need to root the device
but how stupid is that if i dont have usb host mode active how i can onnect my device with computer for root?
it does not connect even dont show in computer that some usb device ger connected its very complicated can any one give splution
how i can enable usb host mode with out root device and if i have to root the device how i can root with out usb mode not working because with out usb host me the device will not be connected .
any suggestion will be appericiated
i think my device is not rooted but i have acces to android all system files but i am unable to edit any file like it have write
protected .
click on usb debugging!
or install moborobo pc suite for chiness android
problemmmmmmmmmmq
anabhi said:
click on usb debugging!
or install moborobo pc suite for chiness android
Click to expand...
Click to collapse
hello please understand my problem i click onusb debug is very simple answer
i know what i need to click and i click on every posible option but the problem is that
microusb port is not connecting with any thing if i connect with usb stick or with card reader by otg cable
or even if i connect with computer computer dont give any sound i know u will say install mobo robo suit
but my problem is that even if software is not install computer should tell that a usb device get inserted but could not be recognized
but no nothing is showing also i am not able to edit my android filesystem files
i listen if device is rooted it should not show the system files but i can see all files so its quite confusing plz give me a good solution
that how i can active the capacity to use micro usb port because right now its just charging nothing else
use z4root,frameroot android for root
gsm forum will give u better soultion ,search on google
try other usb cable !
anabhi said:
use z4root,frameroot android for root
gsm forum will give u better soultion ,search on google
try other usb cable !
Click to expand...
Click to collapse
i just wantto know thatif usb is showing no connection with otg or computer then how i can root with any software i try
some root softwares but it says no device connected
second i change many cables and with other devices same cables are working but not wi this one
third i just want that ,y microusb port start functioning for that i need that i cam edit android file system files
is there any way that i can edit the files like i get permission to edit system filez?
or is there any idea how i can enable super user because it is not enable any suggetion will be apperiaciated

[Q] [Problem] OTG Stopped Working [Hyundai T10]

Hello,
I've used my tablet with flash drives etc. with the OTG cable. Before few days the OTG stopped working.
I though it's from ES File Manager because I use this app very often and I have clicked somewhere and disabled the OTG function.
So, I made decision to pre-install my android firmware and clear everything. > I did this.
And then I put the OTG cable with the flash drive connected and then a USB mouse - the flash drive does not connect, the optic ot the mouse only lights up and then it goes off and the mouse does not work too. I tried the OTG cable on my phone (SGS 2) and it's working perfectly.
Can you guys help me to solve this problem?

[Q] measy B4K usb debugging when theres no usb micro port ?

Hi,
i recently gotten hold of an allwinner A31 device being the measy B4K. (http://www.measy.com.cn/product/showproduct75_en.htm)
I also gotten hold of a firmware update for this device from a guy that was in contact with measy support using a chinese friend:
http://www.freaktab.com/showthread....S918S-firmware&p=130534&viewfull=1#post130534
firmware rom download is here : https://alimail.alibaba.com/alimail...eb961&[email protected]
Now from what i've seen from other a31 devices is that you have to use the phoenixlivesuite to upload the firmware and you need usb debugging for this (the tool itselve says so also). but the device only has 2 female usb ports and no usb micro port not even on the PCB that i can see when i opend the box. One of the guys bought a normal male to male usb cable and tried in the diffrent usb slots but was not able to get any response. some others said that you need an usb otg cable but does that even exist for a usb male to male cable ? (if so where) if not would using a micro sd cable from my phone with a usb micro female to usb male adapter do the trick ?
also the img file is in some special format but it can be unpacked well almost all files using the tool from this thread http://forum.xda-developers.com/showthread.php?t=1753473 and it gives me all kind of *.fex files like uboot.fex, recovery.fex etc it only had problems with one fex file being sys_partition.fex but i did get a system.fex of 400mb.
i have root on the device also and i can get into recovery mode using a reboot to recovery apk however it's useless since i can't move around in it, the remote don't work, nor a keyboard attached to it and it has no physical buttons.
Anyway my main question is what sort of cable should i get to get this work a usb male to usb male or just some usb female to usb male adapter + usb micro phone cable to get usb debugging working so i can at least get windows to recognize the device.
I'm also posting this for other people since i don't think many people know about that firmware file for b4k, perhaps others having the same device have more luck
thanks

Copying files from W10 to the Le Max

Hi all,
I'm having trouble with copying files to the phone. When I connect it to my PC via USB The device pops up in explorer, but every time I try to copy something it fails. When I try to copy entire folders (I'm trying to copy Flac and MP3 music) W10 gives an error that it can't copy the files. When I try to copy files, it shows the copying dialog, but nothing ever happens, however long I wait. I've tried debugging mode, uninstalling Kies, Uninstalling the Samsung drivers, installing ADB drivers,... nothing seems to work. If anyone has any advice, it would be greatly appreciated.
I've also tried a new USB-C 3.1 cable, to no avail. I'm using the USB 3.0 port. When I try an USB 2.0 port with the USB 3 cable, the phone doesn't show up. Which is weird I guess but maybe due to the nature of USB-C.
CHeers
I forgot to mention that I tried copying a picture from the phone to my pc, which worked perfectly.
Hello, I know your message was time ago, but I have now exactly the same problem with a Leeco LE 2, also with C-type USB, and searching for some solution I have found your question. ¿Did yoy manage to find the way to fix this problem?
Regards
Muscleduck said:
I forgot to mention that I tried copying a picture from the phone to my pc, which worked perfectly.
Click to expand...
Click to collapse
You probably connected your phone to the PC as Camera(PTP).
When you connect your phone to your PC, the USB symbol should appear at the top of the screen. Swipe your finger from top of the screen down you will see the USB symbol saying USB for charging. Click on it you will see the 3 connection options, pick Media device(MTP) and you should be able to copies files between your PC.
Thank you for your response, but I'm afraid that this was right, I tried it with the MTP mode enabled.
me too i have problem of copy , I can transfer files to the phone, but I can not copy from the smartphone to the pc
MTP and usb debug is actived
i cant recover my TWRP backup
With version of software do you have?
Running 21s build with Server2016 and when I tried to cut the /DCIM/Camera directory frome the LeEco it just deleted it. Ughhhh.
Did you manage to solve this?
I'm in the same situation. I can't copy mp3 files to the internal memory of the device.

Categories

Resources