Alright, this can be a noob-ish question but just wanted to ask if we can unlock the bootloader unofficially by wiping data of current rom and then directly using the fastboot flash *bootlader* command?
Proper Unofficial method suggests the internal storage wipe too, which i don't want.. so is this possible?
Manan44 said:
Alright, this can be a noob-ish question but just wanted to ask if we can unlock the bootloader unofficially by wiping data of current rom and then directly using the fastboot flash *bootlader* command?
Proper Unofficial method suggests the internal storage wipe too, which i don't want.. so is this possible?
Click to expand...
Click to collapse
I have the file for unlocking bootloader and installing twrp without voiding your warranty and loosing data...
Its unofficial but works well for me
I will be uploading it. With full instructions.
Wait for some days
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
[email protected] said:
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
Click to expand...
Click to collapse
Thanks for this, but i already have twrp and root.. just wanted to unlock bootloader as i flashed a MM aosp rom which relocked the bootloader.. so will the unlock bootloader bat file alone do the job???
Manan44 said:
Thanks for this, but i already have twrp and root.. just wanted to unlock bootloader as i flashed a MM aosp rom which relocked the bootloader.. so will the unlock bootloader bat file alone do the job???
Click to expand...
Click to collapse
Yes may be... But do it after getting your phone into edl mode
help
[email protected] said:
The solution is here:
download the required files from the given link: [50mb]
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
and GAPPS:
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
Hi.what can i do if i can't open the phone to allow oem unlocking and usb debugging and windows don't let me to go to test mode.
Click to expand...
Click to collapse
Like many, I was overwhelmed with information when trying to unlock, flash, and root my phone. After many failures, I decided to compile the good information all in one place.
I hope this helps. If it does, please consider buying me a beer...
Bitcoin Address: 17p3sW8hG5ndZqAuoDQiUE99iHwBZss6UK
Bitcoin QR Code:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
________________________________________
MY SPECS
I'm using the Redmi K20 Pro running Android version 9 PKQ1.181121.001 (patched July 1, 2109) and MIUI Global 10.3.5. I am in the United States and I have Verizon as my cellular service provider. On the Redmi K20 Pro in the United States, Verizon is compatible with LTE/GSM (and CDMA, but I learned that Verizon is phasing out CDMA).
BOOTLOADER & UNLOCKING
Let me start by thanking Jumundz who saved my ass when I bricked my phone. More on that below...
"ALL IN ONE" TOOL
The following guide details how to root your phone manually. If you already understand the process, or want to tweak some of the steps, I recommend using:
ALL IN ONE tool. / (mediafire alternative link)
...or...
Xiaomi ADB Fastboot Tools (this is the current version, 2.3.1)
DEVELOPER MODE & USB DEBUGGING
To start, we need to enable Developer Mode.
Go to Settings and then click on About phone.
Then tap "MIUI version" several times (5-7 taps) until a notification reads "You are now a developer."
Go back into the main Settings menu and scroll down until you see Additional settings.
Click on Additional settings and then scroll down until you see Developer options
Click on Developer options. Here you will find a number of options that are not commonly available. If you have not unlocked your device yet, you will notice that OEM unlocking is turned off and also greyed out so that you cannot click on it. Instructions for unlocking your device can be found below.
Scroll down and tap USB debugging.
** Optional ** I also tap Install via USB just in case I want to use that down the road.
After enabling Developer Mode, connect your phone to your computer with a USB cable. (*NOTE* Some USB cables only charge your device. Make sure your USB cable is designed to permit data transfer as well.) A notification will pop up on your phone asking if you would like to allow the connection for USB debugging. Press "YES" so that the computer and phone will recognize each other in the future.
OFFICIAL MIUI UNLOCK
As many of you know, Xiaomi created obstacles for those wishing to unlock the bootloader. Xiaomi claims they created the waiting period to "deter resellers from loading shady firmware into their devices" (LINK). So, I created a Mi Account and then made the unlock request with the official MIUI unlocking tool Mi Unlock. The program that downloaded (at least for me) through the official site was miflash_unlock-en-3.5.719.27.zip
MI ACCOUNT BYPASS TOOLS?
Since unlocking my device through the official pathway, I read that you can bypass this process using other tools. ** Disclaimer ** I have not personally used these tools! XiaoMiTool (version 1) is discussed in this XDA article, but recommends using XiaoMiTool V2(Download link to the latest version of XiaoMiTool V2). XiaomiBuzz suggests using the Mi Account Unlock Tool. Here is a link to the Mi Account Unlock download file (the password required to unpack the .rar file that downloads is ourflashfile.com).
JUST IN CASE: THE MOST IMPORTANT TOOL
** Disclaimer ** You may not need this section, but if you run into problems (like I did) this is your salvation.
After a few failed attempts at rooting my Redmi K20 Pro, I flashed my device and found myself needing to unlock the bootloader (again). However, when I tried, I ran into an error message that read "you must wait 30 days before unlocking another device." Some of you have run into this problem if you accidentally lock your device while using Xiaomi ADB/Fastboot Tools or TOOL ALL IN ONE (discussed later in this guide). Luckily, I found a thread by Jumundz (LINK) that indicated that an older version of MiFlash Unlocker (version 2.2.406.5) would still unlock my device. Thankfully it did!
GET THE STUFF YOU NEED
There are several sites that suggest to offer the best way to root your device. I have tried many of them and very few have worked (it's possible that I messed up the process somewhere). Whatever... this worked for me...
Generally, I followed this guide posted on AndroidInfoTech.com. I am, however, making some recommended changes.
XIAOMI USB DRIVERS
Start by getting the USB drivers. XiaomiBuzz has a pretty comprehensive list of all Xiaomi phones and their respective USB drivers (HERE). But, here is a link to the Xiaomi Redmi K20 Pro USB Driver Package for Windows 7/8/8.1/10 (32/64-bit). Scroll down and select the download link.
Alternatively, you could download the Xiaomi Mi PC Suite through mi.com and install the drivers through that program. The version I used was 2.2.0.7032_2717.
Go ahead and install the Xiaomi USB drivers.
ADB & FASTBOOT
Next you'll need to setup ADB & Fastboot. You must have USB Debugging enabled for either of these platforms to work properly. See above for instructions on USB Debugging. Both ADB and Fastboot are utilized through the command line, so I was confused me for the longest time on when to use each one. In fact, I had trouble getting ADB to work, but Fastboot worked fine. Turns out the reverse is more common (people tend to have problems with Fastboot, but not ADB).
Here's the difference:
ADB: This is the platform that you can use when your phone is turned on normally (booted into the system). So, if you can see your your normal phone screens, then ADB will work.
FASTBOOT: Note that you can still use Fastboot when your phone is turned on normally, BUT you cannot use ADB when your phone is in Fastboot mode.
Get the latest ADB Driver Installer from miui.blog. This will install ADB and Fastboot. The current version of the ADB Driver Installer (for me) was 1.4.3. (Alternative download through Mega.nz).
Alternatively (and I recommend this instead), you can get the Android Platform Tools Pack for Windows which comes with the Google USB drivers, ADB, Fastboot, and the ADB/Fastboot drivers. Download it from miui.blog here, or through Mega.nz here.
Go ahead and install the file package you have chosen. Once installed, ADB and Fastboot should be able to be used universally (from anywhere on your PC). Just know that many installation guides suggest installing ADB into a special folder on your C: drive which is fine too. We will come back to this folder to run some commands later in the guide.
TWRP
You'll need TWRP which is a recovery (or "temp") operating system that will run on your phone when you're attempting to root your device. However, TWRP doesn't have an official version specific to the Redmi K20 Pro. Luckily, XDA Member madsponge26 has a list of TWRP options that will work for the Redmi K20 Pro in this thread. I recommend going with the TWRP Auto Install option. You can also download a compatible TWRP image from androidfilehost.com. Here's a link to version-3.3.1-13-raphael.
Once downloaded, extract the .zip file. It should contain 5 or 6 files. Copy all of the files and paste them into the ADB folder (if you're sticking with my recommendation, it will be the "platform-tools" folder). When you copy-and-paste these files, it may ask you if you want to replace some files with the same names. That's fine (they're the same). Just click "Yes." If you downloaded the TWRP image separately (say, from androidfilehost.com), just copy the twrp.img file into the same folder.
MAGISK
Next download Magisk.zip from the official Magisk github.com page. The latest version (for me) was Magisk v19.4. Don't bother unzipping it. This .zip file will be placed (as a .zip file) onto your phone.
DISABLE FORCE ENCRYPTION TREBLE
Also download Disable-Force-Encryption-Treble.zip. Like Magisk.zip, don't bother unzipping this file because you're going to place it (as a .zip file) onto your phone. Here's a Dropbox link to directly download the file. Otherwise you can download it from Androidfilehost.com.
FLASHING TWRP & ROOTING
Alright, you got all the software tools and now we're ready to proceed with flashing TWRP and Magisk.
With your phone powered on normally, plug your device into your computer with the USB cable.
Pull down on the screen to display the notifications. One of them should read "Android System" and indicate how the phone is interacting with your computer as a connected device. Switch it to "File Transfer." Your phone should now show up as a drive on your computer.
Open the "Redmi K20 Pro" drive on your computer and then open the "Internal shared storage" folder (it should be the only folder).
Drag and drop the Magisk.zip and the Disable-Force-Encryption-Treble.zip into that folder.
**SIDE NOTE: Some guides suggest that you wait until you're in TWRP to transfer these files. That's fine. To do so, wait until you're in the TWRP interface and then select "Mount" and "Enable MTP." Your phone's internal storage should appear as a device on your computer and you can then transfer the .zips.
Once transferred, unplug your phone from the computer and power it off.
Enter into Fastboot mode by pressing and and holding down the Volume Down button and the Power button at the same time. It may take several seconds. It will vibrate and then boot your phone into Fastboot mode.
Next, connect your phone to your computer with the USB cable.
Once you connect your phone to the computer via USB, you should hear the computer recognize the phone but you may not see it show up as a drive. That's okay.
Go to your computer and open a command line interface in the ADB folder (if you're sticking with my recommendation, it will be the "platform-tools" folder).
**NOTE: If you chose the Auto Install option of TWRP, you can simply double-click the file "flash_twrp.bat" and then skip to the next section (TWRP INTERFACE).
**TRICK: Go to the folder where you have the ADB file adb.exe and click in the file pathway (where it says "C:\Users\Username\Downloads\platform-tools_r29.0.4-windows\platform-tools" or whatever). Highlight and delete that file pathway, and instead type "cmd". Hit enter and it will open a terminal window already in the proper directory.
**SIDE NOTE: If you installed ADB/Fastboot universally, you can simply open the command line interface by clicking on Start and typing "cmd" to open a terminal window. Once in the terminal window, you can "cd" or change directory to the one where you have ADB. Also, you can use Powershell, but you may need to preference each Fastboot command with "./."
In that terminal window, make sure you're in the folder with adb.exe and then type this command:
fastboot devices
This command looks to make sure that the Fastboot platform recognizes your device. Next to "Fastboot Devices," you should see a series of numbers and letters. That series of numbers and letters is your phone identifier.. If you do not see any numbers/letters, then Fastboot does not see your phone and you need to troubleshoot the situation.
Next, type in the following command:
fastboot flash recovery twrp.img
What this is doing is identifying what platform to use (fastboot), telling it what you want to do (flash), in which directory you want to perform that action (recovery), and what file to use to flash it (twrp.img). It is important to note that, depending on how you installed TWRP, the .IMG file may be called "recovery.img" or "twrp.img" or some variation of the TWRP version number. You can either rename the file to "twrp.img" or you can type in the entire filename.
Once you hit enter, it will read something like:
target reported max download size of 805306368 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.437s]
writing 'recovery'...
OKAY [ 0.254s]
finished. total time: 1.696s
Once it's finished, enter this command to boot into the temporary TWRP recovery operating system:
fastboot boot twrp.img
Once you hit enter, it will read something like:
downloading 'boot.img'...
OKAY [ 1.428s]
booting...
OKAY [ 0.138s]
finished. total time: 1.566s
TWRP INTERFACE
Unplug your phone from the USB. The screen will go black and you may see the "Redmi" logo come on the screen. After a few seconds, the TWRP title page will appear. Once the TWRP operating system powers on, you may be presented with the option to enter a PIN code (if you previously had one on your phone) or a passcode. Enter the PIN or code to get into the TWRP interface.
Once in TWRP, you will have several options. Click "Install" and scroll to the bottom of the file list to find the magisk.zip that you transferred onto your phone. Go ahead and swipe right to install it. Once the installation is complete, click "Reboot System" to power the phone back on normally.
That's it. Your Redmi K20 Pro should now be rooted.
If there are any problems, start the process over from the Fastboot interface on your computer (where you flashed TWRP onto your phone with "fastboot flash recovery twrp.img"). Go through the same process, but before you install the Magisk.zip, first install the Disable-Force-Encryption-Treble.zip.
If this was helpful, please consider buying me a beer!
Bitcoin Address: 17p3sW8hG5ndZqAuoDQiUE99iHwBZss6UK
Bitcoin QR Code:
________________________________________
ALL TOOLS FROM THE ABOVE GUIDE
ALL IN ONE Tool: ALL IN ONE Tool
Alternate Download: (mediafire alternative link)
Xiaomi ADB Fastboot Tools:Xiaomi ADB Fastboot Tools v2.3.1
Mi Flash Unlock: miflash_unlock-en-3.5.719.27.zip (just the version that I used)
Mi Flash Unlock (latest version): official download site
XiaoMiTool V2 (link to download latest version): (https://www.xiaomitool.com/V2/#download).
Mi Account Unlock Tool: mediafire download (password: ourflashfile.com)
MiFlash Unlocker 2.2.406.5: mediafire download
Alternate Download: androidfiles.host download
XIAOMI USB Drivers: Xiaomi Redmi K20 Pro USB Driver Package for Windows 7/8/8.1/10 (32/64-bit)
For ADB/FASTBOOT get...
Android Platform Tools Pack for Windows: download from miui.blog (includes: Google USB drivers, ADB, Fastboot, and the ADB/Fastboot drivers)
Alternate Download: Mega.nz download link.
TWRP Auto Install (Mega.nz link): TWRP Auto Install
TWRP 3.3.1-13-Rapheal: androidfilehost.com link
Magisk.zip: Magisk v19.4
Magisk.zip (latest version): official download site
Disable-Force-Encryption-Treble.zip: "]Dropbox direct download link
for MI 9T PRO to?
Hi guys,
You know if this guide works with the European rom 10.3.3?
Thanks
Ekil said:
Hi guys,
You know if this guide works with the European rom 10.3.3?
Thanks
Click to expand...
Click to collapse
This should work but realistically all you really need to do is get all the drivers than go ahead and use mi flash tool to go to 10.3.16 fastboot Rom, can be found at mifirm, then go ahead and flash it make sure to select clean all, NOT clean all and Lock. (it's selected by default). Then proceed to install twrp, and flash any Rom you like, there are some modules for getting back nfc and Gpay so look around for them on here and boom you're all set.
Make sure you have an unlocked bootloader first obviously, after that it's relatively simple to install twrp, and after that it's smooth sailing. You just can't flash on stock European firmware as all these ROMs are based on the Chinese or Indian firmwares and vendors, and as a result will brick your phone,if you try to flash on 10.3.3. Trust me I've done it before and it's not fun.
Good luck :fingers-crossed:
fast9000 said:
This should work but realistically all you really need to do is get all the drivers than go ahead and use mi flash tool to go to 10.3.16 fastboot Rom, can be found at mifirm, then go ahead and flash it make sure to select clean all, NOT clean all and Lock. (it's selected by default). Then proceed to install twrp, and flash any Rom you like, there are some modules for getting back nfc and Gpay so look around for them on here and boom you're all set.
Make sure you have an unlocked bootloader first obviously, after that it's relatively simple to install twrp, and after that it's smooth sailing. You just can't flash on stock European firmware as all these ROMs are based on the Chinese or Indian firmwares and vendors, and as a result will brick your phone,if you try to flash on 10.3.3. Trust me I've done it before and it's not fun.
Good luck :fingers-crossed:
Click to expand...
Click to collapse
Hi!
Thanks for the detailed answer, I'll try it on the weekend ✌?
Hi, could you please list the exact and only set of tools you used to unlock your phone and install 3rd party ROMs?
Like list them step wise
1.
2.
3.
...
Thanks in advance!
ntmalol said:
Hi, could you please list the exact and only set of tools you used to unlock your phone and install 3rd party ROMs?
Like list them step wise
1.
2.
3.
...
Thanks in advance!
Click to expand...
Click to collapse
Well you should realistically read the forums but this is basically what I did
1. Unlock Bootloader using official mi unlock tool, (make an acc. wait a week or so)
2. Get the mi flash tool preferably latest, download fastboot Rom CN 10.3.16 from mifirm (Google it)
3.Go to fastboot mode in phone plug it in, press refresh for port to be detected, extract the mifirm Rom to desktop select the second folder before images option
4. Flash the fastboot Rom make sure to select clean all, DO NOT FLASH CLEAN ALL AND LOCK. (Will brick your phone and you'll be sticked with a locked bootloader)
5. Flash process takes 5 mins roughly, boot in setup lockscreen pass remember it for twrp setup.
6. Flash twrp via fastboot or adb, use the raphael variant latest found on the forum
7. Boot into twrp and enter screen lock to decrypt phone
8. Download any Rom and GAPPS, flash them and you should boot just fine.
Proceed to install magisk, and any other modules you want (vanced, Gpay, etc)
There is a 10.3.17 version for Chinese fastboot Rom available not sure of its compatibility so don't bother just stick to 10.3.16
Very simple once you have an unlocked bootloader just be careful when using the mi flash tool.
Good luck :good:
fast9000 said:
Well you should realistically read the forums but this is basically what I did
1. Unlock Bootloader using official mi unlock tool, (make an acc. wait a week or so)
2. Get the mi flash tool preferably latest, download fastboot Rom CN 10.3.16 from mifirm (Google it)
3.Go to fastboot mode in phone plug it in, press refresh for port to be detected, extract the mifirm Rom to desktop select the second folder before images option
4. Flash the fastboot Rom make sure to select clean all, DO NOT FLASH CLEAN ALL AND LOCK. (Will brick your phone and you'll be sticked with a locked bootloader)
5. Flash process takes 5 mins roughly, boot in setup lockscreen pass remember it for twrp setup.
6. Flash twrp via fastboot or adb, use the raphael variant latest found on the forum
7. Boot into twrp and enter screen lock to decrypt phone
8. Download any Rom and GAPPS, flash them and you should boot just fine.
Proceed to install magisk, and any other modules you want (vanced, Gpay, etc)
There is a 10.3.17 version for Chinese fastboot Rom available not sure of its compatibility so don't bother just stick to 10.3.16
Very simple once you have an unlocked bootloader just be careful when using the mi flash tool.
Good luck :good:
Click to expand...
Click to collapse
I used CN 10.3.17 version and works fine.
Not working?
Hey, i tried doing this but the phone does not boot into TWRP after i send
fastboot boot "C:\Users\loren\Desktop\Root Mi9T\twrp-3.3.1-13-raphael-mauronofrio.img"
Click to expand...
Click to collapse
Instead, it reboots to system, then when i reboot it again it does a couple of bootloops then enters Mi Recovery; to get it to work again i have to wipe all data.
Any ideas? I'm on MIUI 10.3.2.0 EU
---------- Post added at 06:10 PM ---------- Previous post was at 05:51 PM ----------
Bidishake said:
Hey, i tried doing this but the phone does not boot into TWRP after i send
Instead, it reboots to system, then when i reboot it again it does a couple of bootloops then enters Mi Recovery; to get it to work again i have to wipe all data.
Any ideas? I'm on MIUI 10.3.2.0 EU
Click to expand...
Click to collapse
Nevermind, i fixed it - instead of sending that i sent a simple fastboot reboot while pressing volume up. Booted into TWRP, installed disable-encryption and magisk, cleaned cache, and rebooted like a charm.
Thank you for the guide!
I tried to flash twrp on my mi9 t pro miui 10.3.2 global ( for some reason that's the latest ota i got don't know if its a fake rom ) , but can't get to recovery , i tried some versions of twrp but can't get to it with vol + and power button. I get 1st logo than screen fades to black , 1 time it took me to miui recovery.
By the way the miui version im on don't have the option to manually update ( manually select the update zip ),
Does this make it a fake rom?
Also if i try to install from the latest package from the updarer app can it fix my missing miui recovery or brick my phone?
Don't use XiaomiTools v2, my OS was corrupted and stuck at Mi logo after attempting to unlock bootloader and flash TWRP recovery.
Better to do so using official mi unlock to unlock bootloader and ADB fastoot to flash TWRP
I used xiaomi tool v2 to unlock boolader, install twrp and xiaomi eu beta (9.10.17). The tool did it all for me, no drivers, no adb no commands used, nothing else but the tool (xiaomi mi 9t pro eea, windows 10)
Try this for MIUI 11
Install the ADB-Fastboot USB Driver.
Unlock the bootloader of your phone.
Flash TWRP on Redmi K20 Pro / Mi 9T Pro. You may also use Wzsx150’s TWRP if you want; it’s in Chinese tho.
Download Xiaomi.eu MIUI 11 ROM from the link above.
Reboot your phone to the TWRP Recovery mode.
Choose Wipe > Format Data then type Yes to confirm.
Copy the Xiaomi.eu MIUI 11 Zip file to your phone.
Choose Install > locate the ROM Zip file > Swipe to confirm flash.
Choose Reboot > System.
Set up Google Account and you are good to go.
https://miui.blog/redmi-k20/xiaomi-eu-miui-11-redmi-k20-pro-mi-9t-pro
It would be nice if this worked for me........followed every single step and it will not boot into TWRP, it either gets stuck in a boot loop or it goes to the build in MiRecovery, and to get around this i need to force wipe the phone with MiRecovery, i quite literally am not allowed to install TWRP so i gotta go the other route to install Magisk and root my phone.......on EU version of the K20 pro if anybody else is having this issue or knows a fix.
I can't boot into TWRP.
Bootloader is unlocked.
I tried both TWRP, auto Install and version-3.3.1-13-raphael. Both install with "OK". On any of them when I send fastboot boot twrp.img I get again OK's, the screen goes black and it just stay there... any ideas? thanks!
Edit: yesterday I installed OTA update and then I did the bootloader unlock. I discovered in settings that my USB developer was not enabled (disabled after update/or unlock) - could this be a reason for TWRP not working?
Thanks for the guide. Couldn't install Magisk 20.1 via "TWRP 3.3.1-22 Unofficial by mauronofrio", however, was able to do it through TWRP 3.3.1-21.
K20 Pro India on MIUI 11.0.1.0.
Note: in the command 'fastboot flash recovery twrp.img' I thought 'recovery' was the source (computer) folder, but it was actually specifying the folder in the destination (phone).
scarmage said:
Thanks for the guide. Couldn't install Magisk 20.1 via "TWRP 3.3.1-22 Unofficial by mauronofrio", however, was able to do it through TWRP 3.3.1-21.
K20 Pro India on MIUI 11.0.1.0.
Note: in the command 'fastboot flash recovery twrp.img' I thought 'recovery' was the source (computer) folder, but it was actually specifying the folder in the destination (phone).
Click to expand...
Click to collapse
intersting :what you mean by ##Note: in the command 'fastboot flash recovery twrp.img' I thought 'recovery' was the source (computer) folder, but it was actually specifying the folder in the destination (phone).[/QUOTE]
## i do as always flash the twrp via cmd
1- fastboot devices
2- fast flash recovery " recoveryname.img "
3- fastboot reboot like that
what source you ?
The OP does a great job of explaining what each command does. If you're used to DOS commands, then when you issue a command that has a file name (eg: copy), you would specify a 'source directory' and a 'destination directory'. If the command contains only a single directory, then you won't get to know whether it's supposed to be a source directory or destination, unless it's specified explicitly. That's what I meant. But I guess if you know your way around android adb commands and such, you wouldn't have that confusion. I'm kinda new to this, so it wasn't obvious to me.
Antidote03 said:
intersting :what you mean by ##Note: in the command 'fastboot flash recovery twrp.img' I thought 'recovery' was the source (computer) folder, but it was actually specifying the folder in the destination (phone).
Click to expand...
Click to collapse
Don´t resolved
My phone is also like this, asks the 30 days so I can solve the brick, tried mi unlock 2.2.406.5 but it also did not work. Someone help, I don't want to wait 30 days.When I take the internet cable to try tbm, it says error unknown (-1)
After few day i find out solution how to install custom ROM to my Lenovo tablet. I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
Installation guide:
FILES TO DOWNLOAD:
ALL FILES: https:// drive.google.com/drive/folders/1heVQAryphuXNVt5k-HsUhfRrVr9MV34D
ALL LINKS WORK ! JUST DELETE THE SPACE BEFORE drive.google.com...
1) On the tablet, at Settings, you must activate on the Developer Options the Bootloader Unlock (OEM unlocking) and USB debugging. Uncheck Verify apps over USB.
How to unlock Developer: https: //youtu.be/g5wkFAWDsg0
2) Download these files directly to your Android device, not to SD card.
a) https:// drive.google.com/file/d/1230xFbPA7DOGMhuX59yagEd6w1gNCI4o/view SuperSU-v2.79.zip (for me working only v2.79)
b) https:// drive.google.com/file/d/1vRW5RZixtNVfKbJ7nL2EUetANydfmLNg/view Gapps.zip (open_gapps-arm-7.1-micro-20180721)
b) https:// drive.google.com/file/d/13Mp8guzzOvb17s88IQyez_9reozpTNbw/view boot.img (from LiOS14-UNOFFICIAL-TB2-X30L)
3) Power off completely the tablet.
4) REMOVE SD CARD ! (because for me a part of system was installed on SD card).
5) Make sure you have a good cable so the connection between PC and tablet is perfect.
6) Download https: //drive.google.com/file/d/1XTDYs7kxagj-CXHsH_yyQnMXqYwAP_hK/view ADB and Fastboot to your PC .(here are the drivers too).
7) Unzip the zip archive and run with Administrator the apps from inside of the zip. To all the questions you must to press key Y to grant all the rights it needs.
8) Press and hold Volume up and plug in usb. Now you are in stock recovery menu.
9) From stock recovery select reboot to bootloader by using volume keys and power keys.
10) Wait about 5-10sec to tablet boot in bootloader mode. (shows lenovo logo in screen when ready)
11) Download the https:// drive.google.com/file/d/15IH55DgmD6SmlILjTukGeNcmYgUPcmCg/view recovery.img(its TWRP version for Lenovo Tab2 x30f so it wont work properly) and copy it into folder adb at local disk C (installed on step 7)
12) Run CMD with administrator and type cd C:\adb to select the adb folder.
13) In cmd type fastboot unlock-go and press enter. In case this command does not work, please try fastboot -s or fastboot oem unlock-go or fastboot oem unlock .
14) Flash recovery with command fastboot flash recovery recovery.img and then type fastboot boot recovery.img
15) From TWRP select Install and browse to emmc folder and then to your folder where you stored all files you downloaded.
(in bottom right corner you have Images... or Zips... here you can choose what type of file you want to install.
Install SuperSU-v2.79.zip
16) Now in menu select Wipe -> Advanced Wipe and check Dalvik Cache, Data and Cache. Wipe them.
17) Go back to menu and select Install. And install boot.img. At top of display check Boot and flash it.
19) Download https:// drive.google.com/file/d/1MlDxidIqLOZv_QZ91i8bsHgGdBMf7l9g/view LiOS14-UNOFFICIAL-TB2-X30L.zip and copy it into folder adb at local disk C (C:\adb).
18) Go to Menu select Advanced and open ADB Sideload. Go back to CMD on your pc and type
adb devices
If its your tablet properly connected you will see some letters and numbers and sideload. After that type
adb sideload LiOS14-UNOFFICIAL-TB2-X30L.zip
Now wait for finish the installation. If its installed corectly you will see Succesful at the top.
19) Repeate step number 15 and again install SuperSU-v2.79.zip (In installation you will see Boot image patcher)
20) Unplug your tablet from PC. And reboot it. First reboot may take 5-10 minutes and can reboot few times. DO NOT INTERRUPT THIS PROCESS.
21) After first start (set language, date..) Turn off devices.
22) Power on devices to recovery mode
(Press continuously the volume up and power key. When the screen on the tablet has started, release the power key and keep pressing the volume up key)
23) Now select again Install and install Gapps (open_gapps-arm-7.1-micro-20180721.zip). Then reboot it.
Now you have installed LiOS14-UNOFFICIAL (Android 7.1), with all stock apps(gapps) and also rooted device.
this is exactly what i was looking for 3 weeks ago. my sister asked if i could have a look at her old tablet. i managed to do it by translating myself through some russian forums. btw. does netflix work? on my sisters one it does not atm. i guess the play protect thing.
binocchio said:
this is exactly what i was looking for 3 weeks ago. my sister asked if i could have a look at her old tablet. i managed to do it by translating myself through some russian forums. btw. does netflix work? on my sisters one it does not atm. i guess the play protect thing.
Click to expand...
Click to collapse
You need to download apk from Netflix site.
https:// help.netflix.com/en/node/57688
direct link to apk
https:// netflixhelp.s3.amazonaws.com/netflix-4.16-200217-release.apk
mutrin said:
You need to download apk from Netflix site.
https:// help.netflix.com/en/node/57688
direct link to apk
https:// netflixhelp.s3.amazonaws.com/netflix-4.16-200217-release.apk
Click to expand...
Click to collapse
my sister is very grateful
Thank you very much.
What build date has this rom? Sec. patches?
Can you please post your local manifest?
Very interesting guide, unfortunately the links don't work...
Is it possible to restore them?
Tanks. Max
I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
I have only found lineage os for x30l, can someone please link lineage (Android 7) for x30f?
The difference between L and F is that L is the sim card variant. Ive read several people getting "insert sim card" when installing L on a F tablet. So I dont want messages like this.
Thanks for this tutorial. It was possible, to upgrade this old Tablet.
Do you know, if there is anything newer version for our Lenovo?
mutrin said:
After few day i find out solution how to install custom ROM to my Lenovo tablet. I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
Installation guide:
FILES TO DOWNLOAD:
ALL FILES: https:// drive.google.com/drive/folders/1heVQAryphuXNVt5k-HsUhfRrVr9MV34D
1) On the tablet, at Settings, you must activate on the Developer Options the Bootloader Unlock (OEM unlocking) and USB debugging. Uncheck Verify apps over USB.
How to unlock Developer: https: //youtu.be/g5wkFAWDsg0
2) Download these files directly to your Android device, not to SD card.
a) https:// drive.google.com/file/d/1230xFbPA7DOGMhuX59yagEd6w1gNCI4o/view SuperSU-v2.79.zip (for me working only v2.79)
b) https:// drive.google.com/file/d/1vRW5RZixtNVfKbJ7nL2EUetANydfmLNg/view Gapps.zip (open_gapps-arm-7.1-micro-20180721)
b) https:// drive.google.com/file/d/13Mp8guzzOvb17s88IQyez_9reozpTNbw/view boot.img (from LiOS14-UNOFFICIAL-TB2-X30L)
3) Power off completely the tablet.
4) REMOVE SD CARD ! (because for me a part of system was installed on SD card).
5) Make sure you have a good cable so the connection between PC and tablet is perfect.
6) Download https: //drive.google.com/file/d/1XTDYs7kxagj-CXHsH_yyQnMXqYwAP_hK/view ADB and Fastboot to your PC .(here are the drivers too).
7) Unzip the zip archive and run with Administrator the apps from inside of the zip. To all the questions you must to press key Y to grant all the rights it needs.
8) Press and hold Volume up and plug in usb. Now you are in stock recovery menu.
9) From stock recovery select reboot to bootloader by using volume keys and power keys.
10) Wait about 5-10sec to tablet boot in bootloader mode. (shows lenovo logo in screen when ready)
11) Download the https:// drive.google.com/file/d/15IH55DgmD6SmlILjTukGeNcmYgUPcmCg/view recovery.img(its TWRP version for Lenovo Tab2 x30f so it wont work properly) and copy it into folder adb at local disk C (installed on step 7)
12) Run CMD with administrator and type cd C:\adb to select the adb folder.
13) In cmd type fastboot unlock-go and press enter. In case this command does not work, please try fastboot -s or fastboot oem unlock-go or fastboot oem unlock .
14) Flash recovery with command fastboot flash recovery recovery.img and then type fastboot boot recovery.img
15) From TWRP select Install and browse to emmc folder and then to your folder where you stored all files you downloaded.
(in bottom right corner you have Images... or Zips... here you can choose what type of file you want to install.
Install SuperSU-v2.79.zip
16) Now in menu select Wipe -> Advanced Wipe and check Dalvik Cache, Data and Cache. Wipe them.
17) Go back to menu and select Install. And install boot.img. At top of display check Boot and flash it.
19) Download https:// drive.google.com/file/d/1MlDxidIqLOZv_QZ91i8bsHgGdBMf7l9g/view LiOS14-UNOFFICIAL-TB2-X30L.zip and copy it into folder adb at local disk C (C:\adb).
18) Go to Menu select Advanced and open ADB Sideload. Go back to CMD on your pc and type
adb devices
If its your tablet properly connected you will see some letters and numbers and sideload. After that type
adb sideload LiOS14-UNOFFICIAL-TB2-X30L.zip
Now wait for finish the installation. If its installed corectly you will see Succesful at the top.
19) Repeate step number 15 and again install SuperSU-v2.79.zip (In installation you will see Boot image patcher)
20) Unplug your tablet from PC. And reboot it. First reboot may take 5-10 minutes and can reboot few times. DO NOT INTERRUPT THIS PROCESS.
21) After first start (set language, date..) Turn off devices.
22) Power on devices to recovery mode
(Press continuously the volume up and power key. When the screen on the tablet has started, release the power key and keep pressing the volume up key)
23) Now select again Install and install Gapps (open_gapps-arm-7.1-micro-20180721.zip). Then reboot it.
Now you have installed LiOS14-UNOFFICIAL (Android 7.1), with all stock apps(gapps) and also rooted device.
Click to expand...
Click to collapse
I have followed the instructions and successfully installed LiOS14. Then, however, I have factory reset the tablet via Settings. Now it always boots to TWRP, no matter what I have tried I could not installed back the LiOS14 I only have TWRP right now.
Any help?
Boyalikus said:
I have followed the instructions and successfully installed LiOS14. Then, however, I have factory reset the tablet via Settings. Now it always boots to TWRP, no matter what I have tried I could not installed back the LiOS14 I only have TWRP right now.
Any help?
Click to expand...
Click to collapse
Same here
For me, this worked:
Lg v20 keeps booting to twerp recovery after factory reset. Megarom
Really not loving this phone and this rom. After learning I can't return to stock. Decided to factory reset it andoesn't then it boots directly to twerp recovery. Do did the first factory recovery from within the phone. Then after it booted into...
forum.xda-developers.com
The tablet can also run on LineageOS 16 which is Android 9.
As I saw that the guys in the Russian 4PDA-Forum had been able to create a LiOS16, I was able to make some adjustments and compile a ROM with most recent security patches which now runs on my good old TB2-X30L / TAB2 A10-30:
lineage-16.0-20210328-UNOFFICIAL-TB2-X30L.zip | by kenschbacher9 for 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
it seems that google drives are off. Can someone re-upload please?
Hallo,
I have installed LiOS14-UNOFFICIAL-TB2-X30L.zip. The installation was without problems.
But I am having problem with WiFi - problem of MAC 02:00:00:00:00:00. I have tried a lots of tips but nothig worked. Two times I was succesfull to set some MAC, but always, after while, it was gone. No able to reproduce to set.
Is it really so difficult to set somehow the MAC addres for the WiFi?
As I understand the setting of the MAC differs between different releases of OS. Does anybody know how it work in this release? It should by known where this relaese expects the MAC setting. Am I right?
1. temporary succes: Setting MAC in system/etc/firmware/wlan/qca_cld/wlan_mac.bin (I think. Its longer time ago and there was more attempts). It lasted for few months. It is not mine device so I don't know how it was handled.
2. temporary succes: I copied system/etc/firmware/wlan dir to system/vendor/firmware/wlan. I did it based on how it is in Samsung Galaxy S4 mini with Lineage 16. It worked. After restart I had to swith off and on the airplane mode to set MAC. After few attempts it was gone. No able to reproduce to set the MAC.
I am not Linux expert
nonicktoday said:
The tablet can also run on LineageOS 16 which is Android 9.
As I saw that the guys in the Russian 4PDA-Forum had been able to create a LiOS16, I was able to make some adjustments and compile a ROM with most recent security patches which now runs on my good old TB2-X30L / TAB2 A10-30:
lineage-16.0-20210328-UNOFFICIAL-TB2-X30L.zip | by kenschbacher9 for 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thank you very much, install your rom on my TB2-X30F and it goes very well, the only drawback that I present is that the wifi is very slow but the rom is excellent, thank you very much for your work.
palamaro said:
it seems that google drives are off. Can someone re-upload please?
Click to expand...
Click to collapse
it still work. u just need to remove the space between htttp:// AND drive.google.com...
nonicktoday said:
The tablet can also run on LineageOS 16 which is Android 9.
As I saw that the guys in the Russian 4PDA-Forum had been able to create a LiOS16, I was able to make some adjustments and compile a ROM with most recent security patches which now runs on my good old TB2-X30L / TAB2 A10-30:
lineage-16.0-20210328-UNOFFICIAL-TB2-X30L.zip | by kenschbacher9 for 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Hi all, I've been trying to install the L16 version but I cannot install gapps or any zip from twrp. What is the procedure to install it correctly?
Boyalikus said:
I have followed the instructions and successfully installed LiOS14. Then, however, I have factory reset the tablet via Settings. Now it always boots to TWRP, no matter what I have tried I could not installed back the LiOS14 I only have TWRP right now.
Any help?
Click to expand...
Click to collapse
removing battery worked for me
Ive tried this tutorial and i bricked my tablet (i didn t backup the original firmware ) but i learned something new
for everybody who bricked their tablets lenevo tab 2 tb2 x30L do this:
1.first install Qualcomm_USB_Driver_v1.0 https://androiddatahost.com/nbyn6
2.install qfill 2.0.0.5 https://mydevfiles.com/download/qfil-tool-v2-0-0-5/
3.in qfill select flat build , progammer path is where you have your stock rom and load content same thing
4.press volume up +volume down and power button at the same time on your tablet *screen should be black*
5.press download content in qfil as soon as you connect the tablet to pc
stock firmware https://firmwarefile.com/lenovo-tab-2-tb2-x30l
^ english is not my first language so sorry for mistakes ^
[DELETED]
mutrin said:
After few day i find out solution how to install custom ROM to my Lenovo tablet. I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
Installation guide:
FILES TO DOWNLOAD:
ALL FILES: https:// drive.google.com/drive/folders/1heVQAryphuXNVt5k-HsUhfRrVr9MV34D
ALL LINKS WORK ! JUST DELETE THE SPACE BEFORE drive.google.com...
1) On the tablet, at Settings, you must activate on the Developer Options the Bootloader Unlock (OEM unlocking) and USB debugging. Uncheck Verify apps over USB.
How to unlock Developer: https: //youtu.be/g5wkFAWDsg0
2) Download these files directly to your Android device, not to SD card.
a) https:// drive.google.com/file/d/1230xFbPA7DOGMhuX59yagEd6w1gNCI4o/view SuperSU-v2.79.zip (for me working only v2.79)
b) https:// drive.google.com/file/d/1vRW5RZixtNVfKbJ7nL2EUetANydfmLNg/view Gapps.zip (open_gapps-arm-7.1-micro-20180721)
b) https:// drive.google.com/file/d/13Mp8guzzOvb17s88IQyez_9reozpTNbw/view boot.img (from LiOS14-UNOFFICIAL-TB2-X30L)
3) Power off completely the tablet.
4) REMOVE SD CARD ! (because for me a part of system was installed on SD card).
5) Make sure you have a good cable so the connection between PC and tablet is perfect.
6) Download https: //drive.google.com/file/d/1XTDYs7kxagj-CXHsH_yyQnMXqYwAP_hK/view ADB and Fastboot to your PC .(here are the drivers too).
7) Unzip the zip archive and run with Administrator the apps from inside of the zip. To all the questions you must to press key Y to grant all the rights it needs.
8) Press and hold Volume up and plug in usb. Now you are in stock recovery menu.
9) From stock recovery select reboot to bootloader by using volume keys and power keys.
10) Wait about 5-10sec to tablet boot in bootloader mode. (shows lenovo logo in screen when ready)
11) Download the https:// drive.google.com/file/d/15IH55DgmD6SmlILjTukGeNcmYgUPcmCg/view recovery.img(its TWRP version for Lenovo Tab2 x30f so it wont work properly) and copy it into folder adb at local disk C (installed on step 7)
12) Run CMD with administrator and type cd C:\adb to select the adb folder.
13) In cmd type fastboot unlock-go and press enter. In case this command does not work, please try fastboot -s or fastboot oem unlock-go or fastboot oem unlock .
14) Flash recovery with command fastboot flash recovery recovery.img and then type fastboot boot recovery.img
15) From TWRP select Install and browse to emmc folder and then to your folder where you stored all files you downloaded.
(in bottom right corner you have Images... or Zips... here you can choose what type of file you want to install.
Install SuperSU-v2.79.zip
16) Now in menu select Wipe -> Advanced Wipe and check Dalvik Cache, Data and Cache. Wipe them.
17) Go back to menu and select Install. And install boot.img. At top of display check Boot and flash it.
19) Download https:// drive.google.com/file/d/1MlDxidIqLOZv_QZ91i8bsHgGdBMf7l9g/view LiOS14-UNOFFICIAL-TB2-X30L.zip and copy it into folder adb at local disk C (C:\adb).
18) Go to Menu select Advanced and open ADB Sideload. Go back to CMD on your pc and type
adb devices
If its your tablet properly connected you will see some letters and numbers and sideload. After that type
adb sideload LiOS14-UNOFFICIAL-TB2-X30L.zip
Now wait for finish the installation. If its installed corectly you will see Succesful at the top.
19) Repeate step number 15 and again install SuperSU-v2.79.zip (In installation you will see Boot image patcher)
20) Unplug your tablet from PC. And reboot it. First reboot may take 5-10 minutes and can reboot few times. DO NOT INTERRUPT THIS PROCESS.
21) After first start (set language, date..) Turn off devices.
22) Power on devices to recovery mode
(Press continuously the volume up and power key. When the screen on the tablet has started, release the power key and keep pressing the volume up key)
23) Now select again Install and install Gapps (open_gapps-arm-7.1-micro-20180721.zip). Then reboot it.
Now you have installed LiOS14-UNOFFICIAL (Android 7.1), with all stock apps(gapps) and also rooted device.
Click to expand...
Click to collapse
Will this work with x30F?