Once I enter the "ODIN/download mode" it then promps me to press "Volume +" (up) to continue or "Volume -" (down) to cancel. I press "Volume +" and Nothing happens, my volume buttons do work but doesn't seem to register when i'm in Download mode.
Device: Samsung Galaxy S7 SM-G930W8
Software Version: 7.0
IntenseLeveLing said:
Once I enter the "ODIN/download mode" it then promps me to press "Volume +" (up) to continue or "Volume -" (down) to cancel. I press "Volume +" and Nothing happens, my volume buttons do work but doesn't seem to register when i'm in Download mode.
Device: Samsung Galaxy S7 SM-G930W8
Software Version: 7.0
Click to expand...
Click to collapse
Boot into recovery mode and select "boot to bootloader"
This, to my understanding, is essentially the same thing. Once here, flash stock bootloader and retry download mode?
I hope this helps
hey, i've got a problem.
i'm running on Oreo 20r and installed Magisk using TWRP.
after rebooting, my device stucks in a bootloop.
is there any solution for my problem?
flashed magisk 17?
yes...
okay, actually I am currently stucked with the same issue too.
But I just got back my TWRP by doing following :
1) Boot into download mode (https://www.youtube.com/watch?v=_mycJDiFUPk)
2) Still in download mode, press and hold "vol down + power" (this time USB cable is still connected to PC and phone), it will reboot the phone, hold both button till you get in fastboot mode
3) once in fastboot mode, flash back TWRP as per unlocking guide
Now I am still in TWRP, hesitating what to do next. lol
Hope it helps a bit
it's not possible for me.
my device reacts to nothing... no keys, no recovery, no download mode
bootlooping like no tomorrow
maybe you can install KDZ-file using LGUP
or try to flash ZIP-file
https://forum.xda-developers.com/lg-v30/development/rom-eu-lg-h930-21a-rom-t3830169
mrmojoman said:
it's not possible for me.
my device reacts to nothing... no keys, no recovery, no download mode
bootlooping like no tomorrow
maybe you can install KDZ-file using LGUP
Click to expand...
Click to collapse
I just clean flashed back Boombox 1.3 with magisk 16.0, so far booting up good.
I think you need to try again.
The download mode is a bit tricky, need to very fast hold long power button till off, once off, hold the vol up and connect the USB cable to PC. it should trigger the download mode
The bootloop that you have now, is just "LG V30 ThinQ" and the "unlocked bootloader" msg right? same as me I think
maybe you can install KDZ-file using LGUP
I just clean flashed back Boombox 1.3 with magisk 16.0, so far booting up good.
I think you need to try again.
The download mode is a bit tricky, need to very fast hold long power button till off, once off, hold the vol up and connect the USB cable to PC. it should trigger the download mode
The bootloop that you have now, is just "LG V30 ThinQ" and the "unlocked bootloader" msg right? same as me I think
Click to expand...
Click to collapse
it's not possible to turn my device off. i hold power button for minutes and nothing happend. i tried also in combinations with volume keys.
mrmojoman said:
it's not possible to turn my device off. i hold power button for minutes and nothing happend. i tried also in combinations with volume keys.
Click to expand...
Click to collapse
okay, let me try describe my steps in details :
1) Phone is bootlooping, USB cable is connected to Phone, NOT to PC
2) Hold down power button only till the screen becomes "black"
3) Once "black", quickly hold the "vol UP" and connect the USB cable to the PC
4) Now it should show the "download mode"
5) Without removing the USB cable, hold "power + vol DOWN"
6) Once screen becomes "black", release the "power" button, hold the "vol DOWN"
7) Until you see the "fastboot mode"
8) Now you can flash TWRP back using fastboot command from the PC
9) Boot back to TWRP
p/s : yes, the phone cannot be turned off, for long time, but it can be for a very short time. Need to use that short time to trigger all the keys
I have the same problem after flashing Magisk 17. I am in a bootloop between LG black start and root/unlocked bootloader warning screen.
I followed your steps 1-7 in a command line screen (as administrator) and it works but it seems that recovery flash is not working because the command line screen show me a very short time in the recovery flashing work (see attached image).
"fastboot reboot" returns me to the bootloop.
"Power Off" and "Restart" options in the phone returns to me to the bootloop again.
If I unplug the USB cable in the fastboot screen, the phone goes to the splash black screen and does nothing.
WTF!!! it's working.
i tried it one more time like you described it.
think i did it too slow before. booted into TWRP and the rest will be no problem (i hope so).
thank you sooo much!
I have the same problem after flashing Magisk 17. I am in a bootloop between LG black start and root/unlocked bootloader warning screen.
I followed your steps 1-7 in a command line screen (as administrator) and it works but it seems that recovery flash is not working because the command line screen show me a very short time in the recovery flashing work (see attached image).
"fastboot reboot" returns me to the bootloop.
"Power Off" and "Restart" options in the phone returns to me to the bootloop again.
Click to expand...
Click to collapse
you have to reboot directly into TWRP after flashing it!
fastboot boot TWRP***.img
How do you booted into TWRP??
trekminal said:
How do you booted into TWRP??
Click to expand...
Click to collapse
use this description to enter download mode and flash TWRP using fastboot.
but after you flashed TWRP, you have to boot into TWRP via fastboot using this command fastboot boot TWRP-3.2.1-joan-v0.1.img
1) Phone is bootlooping, USB cable is connected to Phone, NOT to PC
2) Hold down power button only till the screen becomes "black"
3) Once "black", quickly hold the "vol UP" and connect the USB cable to the PC
4) Now it should show the "download mode"
5) Without removing the USB cable, hold "power + vol DOWN"
6) Once screen becomes "black", release the "power" button, hold the "vol DOWN"
7) Until you see the "fastboot mode"
8) Now you can flash TWRP back using fastboot command from the PC
9) Boot back to TWRP
Click to expand...
Click to collapse
Yeah! I booted into TWRP, I restored a nandroid from last week and all works fine again. THANK YOU!!
mrmojoman said:
WTF!!! it's working.
i tried it one more time like you described it.
think i did it too slow before. booted into TWRP and the rest will be no problem (i hope so).
thank you sooo much!
Click to expand...
Click to collapse
Hey glad that it works for you too
Sent from my LG-H930 using Tapatalk
mrmojoman said:
use this description to enter download mode and flash TWRP using fastboot.
but after you flashed TWRP, you have to boot into TWRP via fastboot using this command fastboot boot TWRP-3.2.1-joan-v0.1.img
Click to expand...
Click to collapse
how did you reflash Magisk 16 after?
@ChazzMatt HAve you looked at this? Some of are having issues after Magisk updated the Magisk app and then lost root...I guess we shouldnt have flashed 17, but when I try and reflash 16 I get the "updater process error" does that mean my only option is to format SD again, or do I have to start from scratch?
islandfever said:
how did you reflash Magisk 16 after?
@ChazzMatt HAve you looked at this? Some of are having issues after Magisk updated the Magisk app and then lost root...I guess we shouldnt have flashed 17, but when I try and reflash 16 I get the "updater process error" does that mean my only option is to format SD again, or do I have to start from scratch?
Click to expand...
Click to collapse
No, see the last few posts of WTF thread. You just have to uninstall 16 first.
Guys I have a huge problem.....
I uninstalled magical 16 using the official uninstaller.....the device went into a bootloop I was able to boot to recovery but the data is now decrypted.....so tried to use OTG to restore a android backup and now I have a "the backup may not boot unless you change back to ext4"
I am at my wits end kindly help
Edit: came out of it. Thanks
creezalird said:
okay, let me try describe my steps in details :
1) Phone is bootlooping, USB cable is connected to Phone, NOT to PC
2) Hold down power button only till the screen becomes "black"
3) Once "black", quickly hold the "vol UP" and connect the USB cable to the PC
4) Now it should show the "download mode"
5) Without removing the USB cable, hold "power + vol DOWN"
6) Once screen becomes "black", release the "power" button, hold the "vol DOWN"
7) Until you see the "fastboot mode"
8) Now you can flash TWRP back using fastboot command from the PC
9) Boot back to TWRP
p/s : yes, the phone cannot be turned off, for long time, but it can be for a very short time. Need to use that short time to trigger all the keys
Click to expand...
Click to collapse
I am stuck with the same kinda issue. By mistake restarted the Phone after wiping the phone for a fresh rom install. now i can see only the LG boot logo. There is no way to power off the phone. Pressed the power button alone for couple of minute but no use. Tried pressing the Vol Down and power to restart. I get a 1 sec window when the phone is off between the restarts but your method does not work in that short time. Is there a way to power off the phone ?
basically there is no Rom on it and does not detect on the PC when plugged in
Please help if you know anything
rupeshrudy9 said:
I am stuck with the same kinda issue. By mistake restarted the Phone after wiping the phone for a fresh rom install. now i can see only the LG boot logo. There is no way to power off the phone. Pressed the power button alone for couple of minute but no use. Tried pressing the Vol Down and power to restart. I get a 1 sec window when the phone is off between the restarts but your method does not work in that short time. Is there a way to power off the phone ?
basically there is no Rom on it and does not detect on the PC when plugged in
Please help if you know anything
Click to expand...
Click to collapse
Try going to TWRP
1. hold vol down + power till it off
2. Once it shows the first on screen, release the power button and press back the power button (vol down hold)
3. A menu for factory reset will be shown, agree to it 2 times
4. Then it will boot to TWRP ( no data will be deleted )
Sent from my LG-H930DS using Tapatalk
Hello Guys,
share mega link created by me of Firmware Galaxy S10 Android PIE G973FOXM1ASD5 - AUT- No WIPE Version, tested and working on my S10 ITV Dual SIM no brand :
https://mega.nz/#!DYdmjKDJ!hy6ei9-ZrC4TdLQbMy-bGiGEDjg8cZiNEwmvl0HCDXk
Guide for Flash Firmware (Use Odin attached on the 3ad):
1. Open the Odin executable;
2. Click the BL button and select the file BL ****;
3. Click on the AP button and select the file AP ****;
4. Click on the CP button and select the file CP ****;
5. Click on the CSC button and select the file CSC ****;
6. Now enter in Download Mode (When the phone is switched off, press VOLUME DOWN button + BIXBY button + POWER button at the same time);
7. You will find yourself in front of a heavenly screen where you will be asked to click on the Volume Up button to confirm the operation;
8. Connect the phone to the PC and wait for the device to be recognized by Odin (The ID: COM box will change color and 0 will appear: COM6 or other number);
9. Click Start;
10. The operation will last a few minutes (usually 5-10 minutes). At the end the device will restart itself to complete some operations;
Regards
I have the Australian version of the Galaxy S10 and in order to get to the Download mode, I need to:
- Hold Volume down + Bixby
- While holding, connect the usb cable (link to my computer)
For some reason the combinaison Volume down + Bixby + Power does not work for me.
Thanks otherwise for sharing this firmware
massacreur75010 said:
I have the Australian version of the Galaxy S10 and in order to get to the Download mode, I need to:
- Hold Volume down + Bixby
- While holding, connect the usb cable (link to my computer)
For some reason the combinaison Volume down + Bixby + Power does not work for me.
Thanks otherwise for sharing this firmware
Click to expand...
Click to collapse
yes the procedure is that, I don't know why you can't get into the download mode
With the s10 its button combinations WHILST putting the cable in.
Holding Bixby and power down whilst inserting cable into the arse end of it
ciccio80 said:
yes the procedure is that, I don't know why you can't get into the download mode
Click to expand...
Click to collapse
This button combination does not work on the S10. You can either:
1. Boot into recovery by pressing Volume Up + Bixby button then Power button. In the recovery menu select bootloader and this will take you to Download Mode
2. Press Volume Down + Bixby button then connect the USB cable.
How to root and flash TWRP on Samsung Galaxy M30s SM-M307F Android 11 R. This TWRP recovery is developed by @santhoosh many thanks for his jobs. After Android 11 released rooting method is little different than usual. Use it at your own risk! Follow the instruction carefully and Make sure to backup all your important data!
Rooting and Flashing instructions
Make sure the bootloader is unlocked, OEM unlocking option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP-M30s-A11-3.5.0_9-0_Magisk.tar as AP in ODIN, ( OneUI3 > TWRP_Magisk.tar )
Click Start.
TWRP Recovery is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Don't remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type "yes" and confirm
Select Install - Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Setup the phone
Connect the Phone to Internet
Make sure OEM unlock option is grey out
Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
TWRP GSI & OneUI3 Android 11 Galaxy M30s
OneUI3 > TWRP_Magisk.tar, to make it easier to identify I rename it to TWRP-M30s-A11-3.5.0_9-0_Magisk.tar
Video Tutorial How to Root Galaxy M30s Android 11
Thanks, does with SM-m307FN ?
ibere said:
Thanks, does with SM-m307FN ?
Click to expand...
Click to collapse
Not tested, but I think it will work
redymedan said:
Not tested, but I think it will work
Click to expand...
Click to collapse
doesnt work with SM-m307FN
redymedan said:
How to root and flash TWRP on Samsung Galaxy M30s SM-M307F Android 11 R. This TWRP recovery is developed by @santhoosh many thanks for his jobs. After Android 11 released rooting method is little different than usual. Use it at your own risk! Follow the instruction carefully and Make sure to backup all your important data!
Rooting and Flashing instructions
Make sure the bootloader is unlocked, OEM unlocking option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP-M30s-A11-3.5.0_9-0_Magisk.tar as AP in ODIN, ( OneUI3 > TWRP_Magisk.tar )
Click Start.
TWRP Recovery is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Don't remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type "yes" and confirm
Select Install - Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Setup the phone
Connect the Phone to Internet
Make sure OEM unlock option is grey out
Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
TWRP GSI & OneUI3 Android 11 Galaxy M30s
OneUI3 > TWRP_Magisk.tar, to make it easier to identify I rename it to TWRP-M30s-A11-3.5.0_9-0_Magisk.tar
Video Tutorial How to Root Galaxy M30s Android 11
Click to expand...
Click to collapse
when i select install in twrp i cant find Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip, all i get is "(up a level)"
crabcakesmen said:
when i select install in twrp i cant find Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip, all i get is "(up a level)"
Click to expand...
Click to collapse
use universal multidisabler samsung I have sent it to you PM
is this still working on Oneui 3.1 update ??
Edit : Worked on Oneui 3.1 (CUD1)
does it work with sm-307fn/ds ? :/.. dont seem to find any tutorials for this model..
redymedan said:
use universal multidisabler samsung I have sent it to you PM
Click to expand...
Click to collapse
Where can I get this one?
lost root after restart
If you have lost root after restart please try the method mentioned in the below tutorial;
How To Root Samsung Galaxy M30s On Android Pie 9.0, 10 & 11? - SamsungSFour.Com
How To Root Samsung Galaxy M30s On Android Pie 9.0, 10 & 11?
www.samsungsfour.com
FLASHED TWRP BUT CANNOT ROOT
Tried it with my M307FN and it worked. But GPS and Auto Rotate Display is not working.