Related
Well, I have a d2pad SN 201301 on the back so its somewhat new
It uses rk2829 rockchip.
Anyways Ive been trying to get recovery on it for the past couple hours to use a new rom, finally got recovery working, did everything installed my rom, and let it restart.
Well, The rom isnt compatible, there was a later version a few pages into the thread that might have been, but the one I got wasnt.
So now I'm stuck, at the intro d2 logo
I only have 1 button and it is power.
Ive tried to get adb working, because it at least says its connected, but with no success anyone have any ideas?
wzzupp548 said:
Well, I have a d2pad SN 201301 on the back so its somewhat new
It uses rk2829 rockchip.
Anyways Ive been trying to get recovery on it for the past couple hours to use a new rom, finally got recovery working, did everything installed my rom, and let it restart.
Well, The rom isnt compatible, there was a later version a few pages into the thread that might have been, but the one I got wasnt.
So now I'm stuck, at the intro d2 logo
I only have 1 button and it is power.
Ive tried to get adb working, because it at least says its connected, but with no success anyone have any ideas?
Click to expand...
Click to collapse
Hey, I realize that it's been a couple years since you posted this question. I never saw any responses. So how did it all end?
Also, there was one critical piece of information you failed to share with the XDA community...you said you worked on getting into recovery with a device that only had a power button and no volume buttons. May I ask how on earth you managed to get into recovery using only a power button? Reason I ask is that I am now facing this situation. NTech Alexis RX3HD8 tablet, rockchip RK2928 processor, power button and no volume buttons! I need to get into recovery but I cannot turn on USB debugging (and the tablet is pattern locked but the pattern was entered too many times....so I am locked out).
At this point, if I cannot enter recovery mode, the tablet is a permanently soft-bricked which is, for all intents and purposes, the same as a hard-brick.
I think what happened for me was, wanted to install new rom, got into recovery to install it, then it bricked my tab, after that I was at the logo
in my case i fixed everything by getting a rkflasher, to reinstall it, and contacting support for the factory image, which is lucky they new something about it, some companies abandon support, or dont know enoguh about what they sell, lol
as for your situation
these are the things i'd try
1. If it has google play, and is connected wifi even if its locked you can try this page
https://www.google.com/android/devicemanager
and then pick ur device and factory reset it is an option (although ive never tried it)
2. search around on the internet for 1 button recovery methods, I've seen quite a few weird tablets, and some I can think of with 1 button recovery
A. a pin hole thats not the reset button or the mic, was an actual button, and that was used to get into recovery with a safety pin, and doing the normal holding it while powering on method
B.. holding the power button, and instead of letting go when u see a logo, keep holding it, till it shuts off again, then power it on
C. plug it in to pc via usb, and turn it on, while its booting, see if ur pc recognizes it at any point during the startup and try to run some commands, ive had a brand of tabs, that give u adb access during boot, but then remove it after finished booting
4. their website is in spanish, and they dont have firmware/manual links available for your tablet
You could contact support for recovery instructions or reflash instructions,, and hope they speak english or you speak Spanish
Most of the time with 1 button tablets, if theirs no info of similar ones online, unless you can contact support, you might be out of luck
PS, my edit:
also, I saw ur post on the youtube video while looking up stuff about this tablet, if that guy can get you a firmware, you have another option of trying to get to download mode too
my tablet, with rk2928 uses these instructions to get it to show up in the RKBatchTool.
https://www.d2pad.info/docs/OSFirmwareInstallInstruction_D2-721.pdf
maybe they can help you get into download mode on urs
all of this being said, I hope my first suggestion will work, IDK if wifi is disabled during pattern lock, or if u can factory reset any tablet, I just know I always see that option when I'm using it to find my devices ect.
CVAngelo said:
Hey, I realize that it's been a couple years since you posted this question. I never saw any responses. So how did it all end?
Also, there was one critical piece of information you failed to share with the XDA community...you said you worked on getting into recovery with a device that only had a power button and no volume buttons. May I ask how on earth you managed to get into recovery using only a power button? Reason I ask is that I am now facing this situation. NTech Alexis RX3HD8 tablet, rockchip RK2928 processor, power button and no volume buttons! I need to get into recovery but I cannot turn on USB debugging (and the tablet is pattern locked but the pattern was entered too many times....so I am locked out).
At this point, if I cannot enter recovery mode, the tablet is a permanently soft-bricked which is, for all intents and purposes, the same as a hard-brick.
Click to expand...
Click to collapse
Without ADB a soft-brick can become permanent state!
wzzupp548 said:
I think what happened for me was, wanted to install new rom, got into recovery to install it, then it bricked my tab, after that I was at the logo
in my case i fixed everything by getting a rkflasher, to reinstall it, and contacting support for the factory image, which is lucky they new something about it, some companies abandon support, or dont know enoguh about what they sell, lol
as for your situation
these are the things i'd try
1. If it has google play, and is connected wifi even if its locked you can try this page
https://www.google.com/android/devicemanager
and then pick ur device and factory reset it is an option (although ive never tried it)
2. search around on the internet for 1 button recovery methods, I've seen quite a few weird tablets, and some I can think of with 1 button recovery
A. a pin hole thats not the reset button or the mic, was an actual button, and that was used to get into recovery with a safety pin, and doing the normal holding it while powering on method
B.. holding the power button, and instead of letting go when u see a logo, keep holding it, till it shuts off again, then power it on
C. plug it in to pc via usb, and turn it on, while its booting, see if ur pc recognizes it at any point during the startup and try to run some commands, ive had a brand of tabs, that give u adb access during boot, but then remove it after finished booting
4. their website is in spanish, and they dont have firmware/manual links available for your tablet
You could contact support for recovery instructions or reflash instructions,, and hope they speak english or you speak Spanish
Most of the time with 1 button tablets, if theirs no info of similar ones online, unless you can contact support, you might be out of luck
PS, my edit:
also, I saw ur post on the youtube video while looking up stuff about this tablet, if that guy can get you a firmware, you have another option of trying to get to download mode too
my tablet, with rk2928 uses these instructions to get it to show up in the RKBatchTool.
https://www.d2pad.info/docs/OSFirmwareInstallInstruction_D2-721.pdf
maybe they can help you get into download mode on urs
all of this being said, I hope my first suggestion will work, IDK if wifi is disabled during pattern lock, or if u can factory reset any tablet, I just know I always see that option when I'm using it to find my devices ect.
Click to expand...
Click to collapse
Hey thanks for getting back to me. You've been extremely helpful and your response may hopefully be found in future by others who have the same problem.
Here's how it's working out for me with this device:
1. It has Google Play but unfortunately the wifi is turned off and there's no way to connect. But in any event, the little kid whose tablet it is (I'm working on the tablet at the request of her father who is my friend), she doesn't remember the Gmail account name or password.
2. I've searched the entire Internet (LOL) including Spanish and Chinese websites/videos but no luck. I can't find anything about putting this badboy into recovery. The reset button is just for show...it only turns the tablet off in case the power button is unresponsive.
3. I've been to the website of "manufacturer". It's a Portuguese company (I speak the language) but they haven't responded to any contact requests. And they appear to offer the firmware for the devices but download link is dead. So I cannot even get the firmware to flash it. The dude on YouTube has not sent me any link to firmware.
But the bigger problem and the key to the issue is that I cannot get the tablet to be recognized by the computer no matter what I've tried. I've tried all kinds of combinations of power button play but I never get that satisfying BEEP that indicates that there is a connection open. You see, I have the drivers for the tablet but there is no way to install them without the tablet giving the opening (even if it would come back as Unknown Device). So, I'm crap out of luck with this soft-brick.
Again, thanks for your help. After 3 days and probably 15 hours spent trying to reset this thing, I'm going to have to throw in the towel. Important lessons learned:
#1. NEVER PURCHASE AN ANDROID DEVICE THAT HAS NO VOLUME KEYS (or without knowing how to get into recovery). You're only asking for trouble if anything should go wrong. And believe me, this is the THIRD TIME I've seen a device that cannot go into recovery. In one case, I was able to flash new firmware directly on bootup off the external SD card (it was an Android laptop with WM8505 chip). I guess one out of three ain't bad odds...but they are not the kind of odds you want with expensive devices.
#2. ALWAYS TURN ON USB DEBUGGING WITH ANY ANDROID DEVICE YOU OWN AND TELL YOUR FRIENDS TO DO THE SAME. One day, it may end up being the savior of the life of that device because it usually means you can access the device via ADB in case of a soft-brick. LOL.
CVAngelo said:
Hey thanks for getting back to me. You've been extremely helpful and your response may hopefully be found in future by others who have the same problem.
Here's how it's working out for me with this device:
1. It has Google Play but unfortunately the wifi is turned off and there's no way to connect. But in any event, the little kid whose tablet it is (I'm working on the tablet at the request of her father who is my friend), she doesn't remember the Gmail account name or password.
2. I've searched the entire Internet (LOL) including Spanish and Chinese websites/videos but no luck. I can't find anything about putting this badboy into recovery. The reset button is just for show...it only turns the tablet off in case the power button is unresponsive.
3. I've been to the website of "manufacturer". It's a Portuguese company (I speak the language) but they haven't responded to any contact requests. And they appear to offer the firmware for the devices but download link is dead. So I cannot even get the firmware to flash it. The dude on YouTube has not sent me any link to firmware.
But the bigger problem and the key to the issue is that I cannot get the tablet to be recognized by the computer no matter what I've tried. I've tried all kinds of combinations of power button play but I never get that satisfying BEEP that indicates that there is a connection open. You see, I have the drivers for the tablet but there is no way to install them without the tablet giving the opening (even if it would come back as Unknown Device). So, I'm crap out of luck with this soft-brick.
Again, thanks for your help. After 3 days and probably 15 hours spent trying to reset this thing, I'm going to have to throw in the towel. Important lessons learned:
#1. NEVER PURCHASE AN ANDROID DEVICE THAT HAS NO VOLUME KEYS (or without knowing how to get into recovery). You're only asking for trouble if anything should go wrong. And believe me, this is the THIRD TIME I've seen a device that cannot go into recovery. In one case, I was able to flash new firmware directly on bootup off the external SD card (it was an Android laptop with WM8505 chip). I guess one out of three ain't bad odds...but they are not the kind of odds you want with expensive devices.
#2. ALWAYS TURN ON USB DEBUGGING WITH ANY ANDROID DEVICE YOU OWN AND TELL YOUR FRIENDS TO DO THE SAME. One day, it may end up being the savior of the life of that device because it usually means you can access the device via ADB in case of a soft-brick. LOL.
Click to expand...
Click to collapse
At last, did we find at last how to enter in recovery mode if there is only one button (power). I am in the same situation with @CVAngelo .Is it possible not to exist recovery mode at all? My tablet is BENEVE R708G with Rockchip RK2928. I tried every combination with power button and reset button but no luck at all.I have boot loop after trying to change the bootanimation.The weird thing is that the new boot animation ''works'' but after that it goes on boot loop forever.
Hi, I've been browsing the forums for people's attempts to fix a problem. At first the phone just turned off and I was unable to turn it on because it was stuck in a boot loop. The rom I had running was an ICS stock rom from hk. During this time i was still able to get into download mode but unable to enter recovery. I have tried many times to get to recovery and then tried to flash with several stock roms too. Upon failing around 10 times I moved on to a custom rom.
This one here:
http://forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
The Jelly bean one here.
Upon failing from this too and unable to do anything but reset the phone and try again. I managed to turn it off... but now unable to turn it on in any way or get into download mode or recovery.
Is there anything I can try to do to get the phone to be working? What can I do?
Try a jig but understand it's very unlikely to get you into download mode. Service centre or local mobile repair shop for diagnosis (I also doubt it will be JTAG'able).
Edit - Also, search for KingRat's 'jump start' method where you try & boot the phone with just the charger/without the battery.
medow70 said:
Hi, I've been browsing the forums for people's attempts to fix a problem. At first the phone just turned off and I was unable to turn it on because it was stuck in a boot loop. The rom I had running was an ICS stock rom from hk. During this time i was still able to get into download mode but unable to enter recovery. I have tried many times to get to recovery and then tried to flash with several stock roms too. Upon failing around 10 times I moved on to a custom rom.
This one here:
http://forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
The Jelly bean one here.
Upon failing from this too and unable to do anything but reset the phone and try again. I managed to turn it off... but now unable to turn it on in any way or get into download mode or recovery.
Is there anything I can try to do to get the phone to be working? What can I do?
Click to expand...
Click to collapse
Don't loose hope mate...
Try remove battery and insert charger (optional)...
Press voldown+home+power button then let someone (your mother, father, brother, sister, neighbor or friends) insert the battery for you while still pressing those 3 keys...
I hope it will enter to download mode again...and report back please...
Try to use an other battery, my original one is fuked up, it does nothing.
I bought a new one and it works
I tried plugging my charger to the phone and pressing the 3 buttons and then having someone plug the battery in for me, still wouldn't start up. Also tried it with another battery i have on hand, also no luck.
You know what the options are then. Ignore people making ridiculous suggestions which don't work. My aim is to be honest with people, tell them the truth, and have them either get their phones fixed or replaced as quickly as possible in this situation (let's face it, nobody likes to be without a phone), rather than fill them with false hope & waste their time.
I think I fried my mobo while trying to flash it cause it does head up the phone without showing anything. I am going to order parts on ebay. I got this confirmed by someone at a shop near where I live, however they won't replace the mobo for me even if i do find a working one.
=) luckily this isn't my phone but my dad's who works at home and doesn't mind using an OLD OLD flip phone just for calls for the time being.
Side question, even if i replace the mobo and I get it booted but I still get stuck in the boot screen loop and unable to flash to any stock roms what can I do?
If you replace the motherboard you should fix it without further problems. New motherboard = new NAND, no more bootloop - unless you flash again & the flash is bad; you can't mitigate the risk of a bad flash, you can only do all the sensible things like making sure you're using a PC with reliable USB ports, that you're flashing the correct firmware for your device, that you're using an original Samsung USB cable. Basically, if you're careful, the risk with any given flash is very low.
So, fix the hardware problem, flash stock for your country/carrier once you've done that, and go from there.
Hey guys, please forgive me for any bad etiquette or lack of information (any information I can provide is available upon request if I leave anything out). I am new to forums in general and especially to XDA, which seems like a good place to get help.
I recently purchased a Sony Xperia Z2 Tablet from Craigslist under the assumption it was a fully unlocked tablet not associated to a carrier. Turns out it was a Verizon Z2 tablet. I dislike Verizon with a firey passion and without getting into too many details, I'm fairly certain they won't help me because a) this tablet wasn't purchased through them as a customer and b) Verizon and I have bad history (unauthorized account modification, shady charges, etc.)
So I thought I'd do my best to make the tablet mine since the asshole who sold it to me has ceased all contact and I don't know how to get a hold of him anymore. No receipt and a data-less tablet.
Anyway, I successfully rooted the tablet and began installing apps that I installed for my G4 when I rooted it (SuperSU, Adaway, Greenify, etc.)
Things were going well but I realised I wanted anything that had to do with Verizon removed from the tablet so I was going to flash Cyanogenmod onto it with a guide I found online. Now rooting and installing custom recoveries was familiar territory and I did these flawlessly. It had TWRP and I made a backup of the system -no Nandroid, sadly-and I began the flashing process. The process said it completed without issue and I went to reboot my device. Enter my current situation:
The device, when I attempted to turn it on, all it did was vibrate constantly until I let go of the power button. Attempting to enter recovery mode (green LED, power + vol down) it showed me, instead of TWRP, a very basic recovery mode with basic options. "Continue booting up", "enter safe mode", "system recovery", and "power down". I tried entering safe mode and it just shut back down, I tried doing a system recovery and it shut down. The only time I ever see the "SONY" logo is if I'm entering this mode. I can enter what I assume is "fastboot mode" (power + vol up and plugging the device into a PC). Nothing on the screen but the LED is blue. I am trying to find guides to restore it if I can and it all looks promising but the only things I know how to really do are root and install custom recovery. I know there are PC tools I can use to send commands to it while it's in fastboot, or send commands in general I just don't know where to begin.
Does anyone know how to fix this? I know it was from Verizon, which sucks, and I know the problem most likely occurred with the attempted flashing of Cyanogenmod. I think I read somewhere I might have done something regarding mismatching kernal numbers. I couldn't find a way to unlock the bootloader so I assume that had something to do with it too.
If someone could give me a guide to restore it to at least its stock ROM where I can begin rooting and installing a custom recovery again, that would be great. Even better would be just flashing a ROM on there that doesn't need Verizon or being able to take it to a stage where it's unlocked and the only evidence it was ever with a carrier is the Verizon logo on the back. I'd really hate to think I wasted money on this and now I'm at a dead end because of a mistake I made. This was supposed to be a gift for my mom on her birthday which is coming up soon. So if anyone knows anything, or has a guide where we can at least get the thing bootable again and I'll just try and deal with a rooted locked device, that would be great.
Thanks for considerations,
Marmalade_Shaws
I have spent time on that screen too.
2 things
1. .. If you installed dual recovery, there is an up, down sequence to select the recovery.
2. Find a downgrade guide, use flashtool to flash. Ft back to stock.
Also you need to know what hardware you are running..511, 561.. And use the proper version.
There are some options with the flashtool and prf maker that can remove branding and vendor stuff. I have not tried those options.
Ez-go said:
I have spent time on that screen too.
2 things
1. .. If you installed dual recovery, there is an up, down sequence to select the recovery.
2. Find a downgrade guide, use flashtool to flash. Ft back to stock.
Also you need to know what hardware you are running..511, 561.. And use the proper version.
There are some options with the flashtool and prf maker that can remove branding and vendor stuff. I have not tried those options.
Click to expand...
Click to collapse
Sorry if this is late... But where can I find the stock? I've searched everywhere and I would need to do it from a flash tool on my PC? I could use all the help I can get.
I just had a very similar experience to the OP, seemingly identical in every way, and am curious if anyone has a solution.
ADB won't function at all, and the bootloader has blocked any sort of flashing via fastboot. Can't boot into TWRP, it goes into a very minimal "recovery," which I imagine is the stock tool, and the Factory Restore option there does absolutely nothing. Flashtool would work great if ADB / Flashmode was at all functional (device blinks and vibrates in a fashion typical of something bricked, and no connection is picked up).
Verizon Z2 Tablets are 561s.
This thing dead or is there some way to push back onto it?
Hi hello
So here’s a head scratcher I hope someone can help me with that won’t involve replacing my main board.
Got myself the p20 lite (ANE-LX1 C432) - Single Sim.
I unlocked the bootloader with Huawei just before they stopped handing out the codes. All was good and happy with the world.
Rooted with Magisk and Was busy messing around With Termux, Linux deploy, Mobile Terminal and some pretty basic stuff. I’ve been out of the android scene for a while so was getting reacquainted with the scene.
Anyway. I was messing around in the terminal in a root shell just fixing basic permissions after messing up my termux environment as root. Phone randomly rebooted (I must’ve messed with the wrong folder -no idea which) came back on and my IMEI and baseband were gone.
No worries, I thought. Happened tonnes of times with my previous Devices (looking at you Samsung) just a quick restore or flash and all will be happy again.
Yeah, not quite.
Note that up until this point I hadn’t touched the system partition (probably besides the mobile terminal mishap -no idea)
So over the last week or so I have tried everything. Restore from Twrp backup. Flashed stock through fastboot, through erecovery. Those flashed ok but didn’t fix it.
Putting numerous different update.app FULL & OTA updates in dload folder on SD and internal all failed. Only used my builds version of course and only ones firmware finder deemed compatible/available
Then I got desperate (read: stupid) Decided to take the unpacked firmware files and flash whichever ones twrp would let me. First tried just the modem files. Didn’t help. Then just went through the list and flashed all I could.
I think the kicker came in when I installed the Trustfirmware.img because once I did that I rebooted and now I was stuck in an endless boot loop. No way to get into recovery. Not with their ton combo nor adb/fastboot.
I still had access to fastboot at this point at least and started doing every single thing suggested all over the net just trying to get back to stock.
Tried the unbrick option on The Huawei Multi-Tool. Flashed ok. Phone still wouldn’t boot. Did it a few times with 3 approved versions. Nothing. Only access to fastboot otherwise I was in a boot loop with error mode error no 15 and the verification failure (Attached below)
Last thing I tried after reading online was to relock my boot loader and flash stock. So I locked it with Huawei Multi-Tool. Reboot......
Now I don’t even have access to fastboot. My PC’s (windows and Linux) don’t even acknowledge it and holding volume down in all the weird and wonderful ways and times does nothing. All I get is startup Huawei Logo, Error Mode as per pic Below and then reboot. That’s it.
I’m assuming it’s trying to do a factory reset after relocking the bootloader (if it even locked properly, can’t check) but it can’t get into recovery/erecovery. I dunno ?
That’s my essay of where I’m at. Warranty is already void so not an option and I don’t want to buy a new mainboard (may as well buy a new phone).
So here I am. Is this my life now or does anyone have any magic tricks to possibly suggest?
Pyrolectic13 said:
Hi hello
So here’s a head scratcher I hope someone can help me with that won’t involve replacing my main board.
Got myself the p20 lite (ANE-LX1 C432) - Single Sim.
I unlocked the bootloader with Huawei just before they stopped handing out the codes. All was good and happy with the world.
Rooted with Magisk and Was busy messing around With Termux, Linux deploy, Mobile Terminal and some pretty basic stuff. I’ve been out of the android scene for a while so was getting reacquainted with the scene.
Anyway. I was messing around in the terminal in a root shell just fixing basic permissions after messing up my termux environment as root. Phone randomly rebooted (I must’ve messed with the wrong folder -no idea which) came back on and my IMEI and baseband were gone.
No worries, I thought. Happened tonnes of times with my previous Devices (looking at you Samsung) just a quick restore or flash and all will be happy again.
Yeah, not quite.
Note that up until this point I hadn’t touched the system partition (probably besides the mobile terminal mishap -no idea)
So over the last week or so I have tried everything. Restore from Twrp backup. Flashed stock through fastboot, through erecovery. Those flashed ok but didn’t fix it.
Putting numerous different update.app FULL & OTA updates in dload folder on SD and internal all failed. Only used my builds version of course and only ones firmware finder deemed compatible/available
Then I got desperate (read: stupid) Decided to take the unpacked firmware files and flash whichever ones twrp would let me. First tried just the modem files. Didn’t help. Then just went through the list and flashed all I could.
I think the kicker came in when I installed the Trustfirmware.img because once I did that I rebooted and now I was stuck in an endless boot loop. No way to get into recovery. Not with their ton combo nor adb/fastboot.
I still had access to fastboot at this point at least and started doing every single thing suggested all over the net just trying to get back to stock.
Tried the unbrick option on The Huawei Multi-Tool. Flashed ok. Phone still wouldn’t boot. Did it a few times with 3 approved versions. Nothing. Only access to fastboot otherwise I was in a boot loop with error mode error no 15 and the verification failure (Attached below)
Last thing I tried after reading online was to relock my boot loader and flash stock. So I locked it with Huawei Multi-Tool. Reboot......
Now I don’t even have access to fastboot. My PC’s (windows and Linux) don’t even acknowledge it and holding volume down in all the weird and wonderful ways and times does nothing. All I get is startup Huawei Logo, Error Mode as per pic Below and then reboot. That’s it.
I’m assuming it’s trying to do a factory reset after relocking the bootloader (if it even locked properly, can’t check) but it can’t get into recovery/erecovery. I dunno ?
That’s my essay of where I’m at. Warranty is already void so not an option and I don’t want to buy a new mainboard (may as well buy a new phone).
So here I am. Is this my life now or does anyone have any magic tricks to possibly suggest?
Click to expand...
Click to collapse
Check the second post in this thread:
https://forum.xda-developers.com/honor-7x/help/help-stuck-error-mode-screen-t3735067
kilroystyx said:
Check the second post in this thread:
https://forum.xda-developers.com/honor-7x/help/help-stuck-error-mode-screen-t3735067
Click to expand...
Click to collapse
Thanks for this.
The battery discharged fully about two days ago.
I haven’t tried plugging it in and out as/if it turns on immediately (though even though it shows dead without charger it still comes on immediately).
I’m gonna get a weaker lower amp charger and see if that maybe helps. Fml ?
***UPDATE***
Been at it for hours. Battery is completely flat. But h second I plug it in the the Black Huawei logo comes up ten a few seconds later it’s on the same error screen for a little longer then boot loops like that constantly.
The error isn’t the same as the post in that link though. And I am FRP unlocked.
Eh.
Pyrolectic13 said:
Thanks for this.
The battery discharged fully about two days ago.
I haven’t tried plugging it in and out as/if it turns on immediately (though even though it shows dead without charger it still comes on immediately).
I’m gonna get a weaker lower amp charger and see if that maybe helps. Fml ?
***UPDATE***
Been at it for hours. Battery is completely flat. But h second I plug it in the the Black Huawei logo comes up ten a few seconds later it’s on the same error screen for a little longer then boot loops like that constantly.
The error isn’t the same as the post in that link though. And I am FRP unlocked.
Eh.
Click to expand...
Click to collapse
I guess your previous error was related to ramdisk...
Now what is your current situation?
-What error is showed in the Error mode?
-Can you reach FASTBOOT&RESCUE MODE menu?
-What is your current recovery?
kilroystyx said:
I guess your previous error was related to ramdisk...
Now what is your current situation?
-What error is showed in the Error mode?
-Can you reach FASTBOOT&RESCUE MODE menu?
-What is your current recovery?
Click to expand...
Click to collapse
As it stands I cannot enter fastboot or recovery mode. Update from SD also doesn’t do anything. Battery is completely discharged. And if I leave it on the charger it doesn’t charge, only boot loops.
So with all that the ONLY thing this phone does now is:
- Starts up Showing Huawei logo
- Error Mode Screen with Func No: 15 (bl31 image) & Error No: 1 (security verify failed)
- Reboots
Ths happens whether it’s plugged into the pc’s usb or the charger. Tried all combinations of buttons too.
It has stock recovery as I flashed that back when trying to revert back to stock.
I lost access to fastboot after I locked the bootlaoder again using the Huawei Multi Tool. It’s like it trying to do the factory wipe that it usually would after locking/unlocking the bootloader but is unable to due to the error mode screen.
Sent from my iPhone using Tapatalk
Pyrolectic13 said:
As it stands I cannot enter fastboot or recovery mode. Update from SD also doesn’t do anything. Battery is completely discharged. And if I leave it on the charger it doesn’t charge, only boot loops.
So with all that the ONLY thing this phone does now is:
- Starts up Showing Huawei logo
- Error Mode Screen with Func No: 15 (bl31 image) & Error No: 1 (security verify failed)
- Reboots
Ths happens whether it’s plugged into the pc’s usb or the charger. Tried all combinations of buttons too.
It has stock recovery as I flashed that back when trying to revert back to stock.
I lost access to fastboot after I locked the bootlaoder again using the Huawei Multi Tool. It’s like it trying to do the factory wipe that it usually would after locking/unlocking the bootloader but is unable to due to the error mode screen.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I see, it is really bad
My last hope is to be able to do a forced Firmware upgrade. Press power button and VOL + and VOL- simultaneously. Do you see the same as the attached image?
kilroystyx said:
I see, it is really bad
My last hope is to be able to do a forced Firmware upgrade. Press power button and VOL + and VOL- simultaneously. Do you see the same as the attached image?
Click to expand...
Click to collapse
Ah man, I wish it would even do that. It makes no attempt to even pretend to see the sd card update. If I hold all the buttons in it still only comes up with the error mode and reboots.
I popped it open and connected a charger up battery to see if that would help but it doesn’t.
Do you maybe know the pin layout on the inside or know where I could get schematics? Been looking everywhere.
I’m almost done building my own Jtag box and am hoping to bring it back to life by writing straight to the damn thing.
Sent from my iPhone using Tapatalk
Pyrolectic13 said:
Ah man, I wish it would even do that. It makes no attempt to even pretend to see the sd card update. If I hold all the buttons in it still only comes up with the error mode and reboots.
I popped it open and connected a charger up battery to see if that would help but it doesn’t.
Do you maybe know the pin layout on the inside or know where I could get schematics? Been looking everywhere.
I’m almost done building my own Jtag box and am hoping to bring it back to life by writing straight to the damn thing.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
That is sad!!!
With JTAG and schematics stuff I cannot help you.
What I found recently and it was new for me (I didn't tested yet) is a possibility to install firmware via "dload" folder, but to start installation the stock recovery have to be full functional.
If I found something interesting for you I'll post here.
kilroystyx said:
That is sad!!!
With JTAG and schematics stuff I cannot help you.
What I found recently and it was new for me (I didn't tested yet) is a possibility to install firmware via "dload" folder, but to start installation the stock recovery have to be full functional.
If I found something interesting for you I'll post here.
Click to expand...
Click to collapse
To my knowledge the recovery is installed. Well erecovery. It was working up until I locked the bootloader again and it went into a boot loop instead of doing the factory reset.
Is there any other way to force sd update other than with the dload folder?
Thanks for tying to help, I appreciate it.
Pyrolectic13 said:
To my knowledge the recovery is installed. Well erecovery. It was working up until I locked the bootloader again and it went into a boot loop instead of doing the factory reset.
Is there any other way to force sd update other than with the dload folder?
Thanks for tying to help, I appreciate it.
Click to expand...
Click to collapse
You can check the official documentation about that.
Please let us know how you solved this problem.
kumarsid7 said:
Please let us know how you solved this problem.
Click to expand...
Click to collapse
Still unsolved as of yet.
I’ve finished building my own version of the Riff/Octoplus box as well as a makeshift Jtag. I’m still trying to find and piece together some firmware files and other board software I think I need.
Also, if anyone has any idea where the test point is on this board I’d really appreciate you pointing it out. I cannot find the schematics or any solid documentation anywhere.
I will attach the pics I have of both sides of the board as soon as I get home.
Sent from my iPhone using Tapatalk
in first picture youle see many circles golden 2 smallest is testpoint good luck
Pyrolectic13 said:
Still unsolved as of yet.
I’ve finished building my own version of the Riff/Octoplus box as well as a makeshift Jtag. I’m still trying to find and piece together some firmware files and other board software I think I need.
Also, if anyone has any idea where the test point is on this board I’d really appreciate you pointing it out. I cannot find the schematics or any solid documentation anywhere.
I will attach the pics I have of both sides of the board as soon as I get home.
View attachment 4579956
View attachment 4579957
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
in first picture youle see many circles golden 2 smallest is testpoint good luck
well, try to restore your device using dload method. It needs you to copy the UPDATE.APP in dload folder of an external sd card(formated in NTFS format) and then just press both vol up+down along with power button for a few seconds. It will auto launch huawei e-recovery and will try to flash the UPDATE.APP you stored in ext sd card. This should definitely work.
Dload method doesn't need you to unlock your device or bootloader.
Maybe?
I know it’s a long shot but I still have this phone. If anyone maybe knows if there’s been a way to fix this as of yet please let me know. ?
Lol. Still got this damn thing. Been searching around and seen a few people reporting similar errors. Never find out if they ever solve it though.
So. Anyone maybe have any knowledge to share? Anything at all.
I don't know if you still have your device, but I had the exact same issue with a P10 (VTR-L09)
I was able to fix fastboot using https://github.com/mashed-potatoes/PotatoNV
That tool was designed to unlock the bootloader, but I noticed that It actually flashes a slightly modified version of fastboot.
PotatoNV can also unlock P20 lite bootloader, so you should give it a shot.
Good luck!
If it works, you should be able to flash stock recovery image and then restore the system using the dload folder.
you can Repair it with Software Testpoint and Full Bootloader Unlock ,and then flash a Board Software via Software Testpoint, that helps 100%!!!
use this Firmware Download ANE-LX1
use the Software with logins and you have all what you need.
you must start the Software Testpoint so!!
VIDEO : how to start Software Testpoint P20 Lite
than in Software Testpoint you flash the included Board Software with DC-Phoenix and after that use the included dload update via sdcard and eRecovery mode and your Phone is running!!!
I would unlock the bootloader via Software Testpoint with DC-Phoenix, then the FBLock is unlocked and you can flash as you wish!!!! And the great thing about it is that you don't need an UnlockKey either, you can then read this with HCU client software, the only thing that's stupid is that you need a time-based license for the two programs, which you have to buy.
HCU client download
https://hcu-client.com
DC Phoenix download
https://forum.dc-unlocker.com/forum/modems-and-phones/huawei/155916-dc-phoenix
Since I accidentally bought a 3-day license twice and my P20 Lite is now completely rooted on Lineage 19.1, I can give away 2 access data, which are still valid for 2 days.
you can edit your smartphone with it.
username : bl26457
password : kKncnkMj
username : bl26390
password : JDAZqnkN
Then I wish you a lot of fun with it, hope it helps you if someone else is active in this thread.
I was playing with it, wanted to root it and boot into twpr, but before i could do any of that, i was stuck in recovery mode! First time i restarted it into recovery to figure out how to get into twpr, i got to this screen, entered my pin 3362 and proceded to next menues, didnt find what i wanted so i selected enter to recovery again, phone restarted got to this screen again, but now my touch screen isn't working! I cant type anything! And i cant get past it! I can sthut it down, restart it, go to fast boot mode, but everything leads me to this recovery screen again where my touchscreen isnt working and i cant type my pin or anything!
DAMN THESE CHINESE SOFTWARE ENGINEERS.... i will give my phone back using warranty claim, hopefuly those morons wont fix it and ill just get a new one.... but maybe they will just give me big .I. because i live in corrupt country where law means nothing, so i wanna try my luck here.... anyone have any idea how to fix this?
I'm a newby in this things, once i menaged to unbrick my old chinese phone elephone P something, it took days of googleing trials and errors, but i menaged to install new android version which wasnt supported by my elephone.... but microphone didnt work tho xD So yall need to explain things to me in details coz im pretty noobish, but i can menage....
Man... this sucks so much..... how bad could these engineers be, i cant be first person this happened to, and this is surely a bug that isnt fixed, and i kept my phone up to date.
Happens to me as well. You can still use the volume keys to navigate around; however, you may not be able to go back once you select something. Unfortunately the only way I got around it was by installing a diff recovery, either twrp or the pixel experience recovery kronflux uses.
Don't use twrp on this phone.
Seriously. Do not.
Also, that's not recovery. That's your bootloader menu and only works through using your volume keys and the power button.
(Side note, warranty won't cover a modified device and attempting to turn in a device that's been altered can hurt later attempts at using your warranty for legit concerns.)
ninjasinabag said:
Don't use twrp on this phone.
Seriously. Do not.
Also, that's not recovery. That's your bootloader menu and only works through using your volume keys and the power button.
(Side note, warranty won't cover a modified device and attempting to turn in a device that's been altered can hurt later attempts at using your warranty for legit concerns.)
Click to expand...
Click to collapse
There are 2 pictures, second one is bootloader, yes i navigate using volume buttons, first one is recovery that asks me for password, which i can't type, because ''screen'' stopped working, and i cant get pass these screens. Did you even read my post or just saw it with left eye and decided to type a comment so i have to repeat what i allready said?
Anyways, i returned phone under warranty, and i didnt get to root it with twpr even tho that was what i was trying to do, but phone bugged out on me beforehand. Hopefully they wont give me any problems because i did ''install'' twpr in os, but that probably means nothing as it doesnt really do anything at that point.
I was following tutorials i found for this specific phone, probably bullcrap generic articles, i wont try to root it again because it seems like a problem, **** oneplus....
But, if they dispute my claim and ask for money, they wont get any, i will ask them to return the phone to me and i will manually flash it completely or whatever, and get it working. I was refraining from doing so because its under warranty and i didn't want to **** it up.