Realme xt twrp/ magisk error - Realme XT Questions & Answers

Good evening to Dev Team
1.Today I unlocked my REALME XT Bootloader successfully.
2.Then try to flash twrp recovery (latest one) through adb from pc ,I got write failed error
3.Then I flashed successfully from bugjeager app ..
4.Now I flashed vbmeta also,then when I try to flash magisk I got error 1 msg
5.after I reboot in to my system ,sets everything for first-time ..then get back Bootloader to load recovery ..
6.i got realme ui recovery to install options..
So wats going on ..am I flashing my recovery correctly..
I do I install magisk
Thanks

Related

Couldn't get root access error on miui 8 china developer beta 6.63

getting the following error 'Couldn't get root access-root rom isn't ready,please wait a moment', when trying to use the allow root access tab in security>permissions>allow root access . Is this normal for everyone? Is there another alternate way to enable root?
Yes, you need twrp recovery and BETA-SuperSU-v2.71-20160331103524.zip
If you don't want to flash the custom recovery permanently you can use:
fastboot boot recovery.img
And the twrp recovery will appear. After installing of the zip file and reboot, the stock recovery will take its place.
http://download.chainfire.eu/supersu-beta
This version is 2.74. I can't find 2.71, but it may do the job
tried it, after flashing the zip ,the phone got struck in the mi icon during boot. had to flash my backup.
jipkai123 said:
tried it, after flashing the zip ,the phone got struck in the mi icon during boot. had to flash my backup.
Click to expand...
Click to collapse
With 2.71 there is no problem with this.
Obviously not every version works with every phone.
For example mi 4 is rootable only with 2.65
hmm everytime i try to enter twrp, even if i dont do anything and reboot it will boot struck at mi logo......maybe the dev rom beta just dont work well with twrp.....
Check to see if the bootloader is locked again.
Code:
fastboot oem devices-info

how to root Infinix Zero 4 plus nougat 7.1.1

I tried to flash twrp recovery image but i can't boot to recovery
Also tried philz... make the phone freeze on boot
Please anyone help me !!
Thanks in advance ?
anyone????
anything guyzz????
here is twrp
Sh3R3iF said:
I tried to flash twrp recovery image but i can't boot to recovery
Also tried philz... make the phone freeze on boot
Please anyone help me !!
Thanks in advance ?
Click to expand...
Click to collapse
i got this same issue i like you.
i succeed in doing it with fastboot cmd commands
make sure to backup phone because i lost every thing after flashing recovery.
but it works well
Root Infinix Zero 4 Plus
all you need to root infinix z4 + nougat is
1. firmware marshmallow
2. SP flashtool
3. USB driver
4. twrp
5. supersu
6. firmware nougat
Link firmware
step of installation
1. make sure the driver is installed on your computer
2. flash your device with sp flashtool using marshmallow firmware
3. after flashing, turn on your device as usual and put supersu , twrp and firmware nougat on memory then turn off the device
4. flash your recovery to twrp with sp flashtool
5. then go to recovery mode with use combination button (vol-up + power)
6. install zip supersu then reboot system (your system was rooted on marshmallow firmware)
7. flash your recovery.img with default marshmallow recovery with sp flashtool (juct check recovery.img) then rebot system
7. after that the system updates to Nougat by means of local updates
8. flash recovery again to twrp recovery, reboot to twrp recovery then flash super su again
9. finish. You have rooted z4 + nougat,, sorry bad english:silly:
Info
Thank you for the info guys.

REDMI NOTE 4X MTK / Issu with trying to flash TWRP

Hello everyone,
I have a redmi note 4X with MTK soc
The bootloader is unlocked.
I want to flash TWRP recovery. I use adb, the "nickel " TWRP, and message in the cmd window was "ok"
but when i reboot, whatever the way (buttons or adb reboot), it still reboot on the stock recovery.
I've tryed many times, even with a "moly" TWRP (with my MI 4S, the "aqua" didn't work and I had to flash the "libra" one and it was all effective)
Tryed to re install adb, etc. Wathever, it's always "ok" in adb but still reboot on the stock recovery.
Can't try with flashtool or that kind of (Mitool Flash atc) because I can't find the right "scatter" files....
Does anyone have a clue? what is blocking?
Thanks for help
You must reboot back to recovery, not to system, after installing TWRP.
1. Install TWRP
2. Reboot to Recovery (not to system) - this means you will see TWRP screen again
3. Now you can reboot to System
This is only done for the first time installing TWRP. Next time, TWRP will always be there.
Hello,
Well please I need new help !!
Now I'm fighting a new issu !! Now that I at last managed to flash TWRP, and enter in this custom recovery, my phone don't boot system anymore !! stay stuck on the MI logo (
Do I need to flash the boot.img ? But why the hell would a recovery flashing would have change the boot partition??
And if so, where please could I find the boot.img for MIUI 10.1 stable?
Hello,
For those who have the same issu.
I've flashed a boot.img file found in unzipped miui rom zip.
- download from xiaomi.eu the right rom
- unzip
- find the boot.img file
- flash it with adb / fastboot
Well, So now I have my phone and datas back, and can boot on a custom recovery; but TWRP don't work well. Doesn"t keep the settings, can't install anything (it doesn't find any file when exploring ) and can't wipe cache (as if it can't read partition). That's all I tryed by now, I despair a little and that's a lot of time for an easy thing (was very easy on other phones)
Well, this time I'm flooded, i' ll take somme time but don't give up trying to root that phone
Start again, and I recommend ZCX-TWRP-3.0.2-X-REDMI_NOTE4-MTK_Nikel-16.11.18.img and Magisk instead of SuperSU
https://xiaomifirmware.com/downloads/twrp-custom-recovery-redmi-note-4-mtk/

Unable to flash the stock fastboot ROM via Mi Flash tool.

For whatever reason I can't budge the tool to flash the latest fastboot ROM on my Xiaomi Mi 8 Lite that I plan to sell since my new phone arrived today. A custom ROM from the last year is currently installed on the device.
I installed the latest Universal ADB drivers, installed the latest Mi Flash tool (2020.3.14.0), put the phone in fastboot mode, connected to PC via USB 2.0 port and tried to flash the latest fastboot stable ROM via the tool with "clean all" option and most of the time what happens when I hit the flash button, the fastboot logo on the phone disappears and in the left top corner a small white text "hit any button to restart" or something like that appears. Only once a progress bar appeared with $fastboot bla bla bla II echo missmatching image and device" and that was it... no progress, again the white text prompting me to hit any button to restart appeared on the screen.
Any ideas what I am doing wrong? cmonBruh
Phone: Xiaomi Mi 8 Lite 64/4 Global (platina with custom ROM installed) Windows 10 Pro 1909, MSI B350M Bazooka with AMD Ryzen 5 2600.
Hello.. I will try to help you.. And tell me if you fixed that..
Can you install a custom recovery? Twrp?
Id you can do that fallow my steps..
First download the fallowing twrp from here :
https://drive.google.com/file/d/14cRc4UG4hzL45cDhdFZ7odr5Kb8LSai0/view
It can support ota update and your phone will boot I used it to flash my mi 8 lite without pc. And works!
Download and flash that twrp using mi flash tool. I hope your bootloader is unlocked if you already have other twrp installed simply flash the twrp zip file. And update your recovery. If you don't have any twrp installed simply rename. Zip file into .img file and flash it with flash tool. If you can't flash it using flash tool try to install any other twrp and then install the zip and update the twrp
After you installed twrp go and download recovery Rom from here :
https://mirom.ezbox.idv.tw/en/phone/platina/
Download the first rom called : V11.0.2.0.QDTMIXM (1.8GB zip file)
( Recovery
miui_MI8LiteGlobal_V11.0.2.0.QDTMIXM_5574e03233_10.0.zip
Filesize
1.8G
MD5
5574e032330450c44c34d7f054de477b
Link
Download (Download to Mi Router)
Press download. Not download to mi router and don't forget.. Download the recovery zip file not the fast boot update!
After you downloaded boot in to twrp which I gave you above, wipe system / data / vendor / cache/dalvik and flash the zip file.
You can flash it with and without to wipe anything. But it is recommended to wipe. Pls go try and install it without to wipe anything, if it works ( for me works!) after flash done boot the phone and see if there is any problem. If u got any bugs or problems perform a clean flash wipe all and then flash!
Id you want root.. Fallow this :
You can root your phone with latest magisc manager using the same twrp. After you flash the boot.img with twrp press restart phone. If it won't restart go again to recovery and format only your data. And your will phone will boot again and you will get root acces. It's the only way to root android 10.
Please let me know if you fixed that problem.. And you flashed successfully the Rom..
DON'T FLASH THE ROM USING ANOTHER TWRP! ONLY THAT RECOVERY I GIVE SUPPORT OTA UPDATE AND CAN BYPASS THE XIAOMI Verification FOR THE STOCK ROM.. IF YOU USE ANY OTHER TWRP YOUR PHONE WILL BE STUCK IN Boot! Orange fox or any other twrp won't work!
I used this method and works like a charm

Alcatel Pop 4 5051x twrp security error/solved

I have used king root app, and flashify to flash twrp recovery so i can root with magisk .
After i flashed twrp ,and tried to enter into recovery i get :
security error: this phone has been flashed with unauthorized software
Primary i have used the twrp app to make a back twrp image ,the app itself failed flashing it ,and after ,, success" from flashify i still have the error.
PS: i have developers opinions and OEM turned on .
_________________'_________________
I have find out that my bootloader is locked and that was the reason for the error

Categories

Resources