hi there,
hope someone can help me,
in my samsung tab s3 sm-t820 i installed twrp_3.2.1-1_T820_28518 and lineage-17.1-20201227-UNOFFICIAL-gts210wifi
but when i reboot i am with the boot screen in loop
i've already tried to wipe and reinstall. but nothing.
please let me know i have a chance.
thanks
someone?
Lucauonz said:
someone?
Click to expand...
Click to collapse
Hey
Lucauonz
maybe you have not the right Lineage-Release ... use lineage-17.1-20200211-UNOFFICIAL-gts3lwifi.zip https://drive.google.com/file/d/1D8lY5z9O3oafqiWlDLvtltFDQCEHnZbN/view?usp=sharing
from this thread: https://forum.xda-developers.com/t/...l-lineage-17-1-android-10-q-20200211.3981535/
I wish you success
Edit: At the end of the discussion there is a link to https://drive.google.com/drive/folders/1E5pBRVSkHv-nc9pQ25DtAp4MwfOOgIwy with lineage-17.1-20200829-UNOFFICIAL-gts3lwifi.zip
Frischifrisch said:
Hey
Lucauonz
maybe you have not the right Lineage-Release ... use lineage-17.1-20200211-UNOFFICIAL-gts3lwifi.zip https://drive.google.com/file/d/1D8lY5z9O3oafqiWlDLvtltFDQCEHnZbN/view?usp=sharing
from this thread: https://forum.xda-developers.com/t/...l-lineage-17-1-android-10-q-20200211.3981535/
I wish you success
Edit: At the end of the discussion there is a link to https://drive.google.com/drive/folders/1E5pBRVSkHv-nc9pQ25DtAp4MwfOOgIwy with lineage-17.1-20200829-UNOFFICIAL-gts3lwifi.zip
Click to expand...
Click to collapse
Hi, thank you anyway but i had some error while i tryied to flash rom and gapp as you can see in the attached screeshot:
sorry, I repeated the installation a second time but this time without any kind of error, now I have restarted the system to get it started, I am with the boot screen in loop, I have read that at the first start it takes some time, for now I wait.
he boot screen is in loop for almost an hour, now the istallation was clear,
I have done these steps in sequence:
format and reboot recovery
flash ROM and GAPPS
reboot - system
boot screen is in loop
any advice?
thanks a lot
Sure ... How well do you already know about rooting or the tools for Samsumg devices?
I will sketch a brief instruction, first download:
Odin (https://forum.xda-developers.com/t/...ead-03-sep-20-galaxy-s10-sm-g975f-ds.3908710/ should work ... you can find most of the software in the tools section odf xda)
SamFirm (https://forum.xda-developers.com/t/tool-samfirm-samsung-firmware-downloader-checker.2988647/)
Use SamFirm to download the latest original Samsung Firmware.
(Connect Tablet with PC & start Download-Mode: press Power (only until Vibrate) + Volume down + Home green Screen then Volume Up, voila)
And use Odin to flash Tablet S3 -> good as new, and you can start all over again ;-)
I will attach some Screenshots ...
Many Greetings
STOP
Did you (not forget to) FORMAT DATA before your attempt to Install a Rom???
maybe try to flash https://forum.xda-developers.com/t/rom-sm-t820-tweaked-rom-sm-t820-tweaked.3659433/ first ... in the thread are very detailed instructions.
just to clarify the above, this is done wile in twrp > wipe menu >format data and it requires you type"yes" before it launches the process
@Frischifrisch @Lucauonz
As Samsung has changed servers or what so ever, Samfirm I didn't find working any longer.
Samfirm_reborn did/does it.
GitHub - ivanmeler/SamFirm_Reborn
Contribute to ivanmeler/SamFirm_Reborn development by creating an account on GitHub.
github.com
.
Btw. recommendation of "Format Data" I encourage as well.
Might be neccessary to reboot to recovery afterwards before continuing.
@Lucauonz Which Gapps are you using?
Pico version I've always found best, as everything else can be installed later additionally.
Try just flashing ROM and test if device restarts without anything else to exclude Gapps as the cause for the failure.
Hi guys,
thanks a lot for your help, for now i am still with this problem, i am left with the boot screen in loop,
now i'm looking for a way to go back to an original android version if possible, a version that doesn't slow me down.
i don't know if it's possible not having a backup
thanks verymuch
Luca
Lucauonz said:
Hi guys,
thanks a lot for your help, for now i am still with this problem, i am left with the boot screen in loop,
now i'm looking for a way to go back to an original android version if possible, a version that doesn't slow me down.
i don't know if it's possible not having a backup
thanks verymuch
Luca
Click to expand...
Click to collapse
That's not a problem to go back to stock.
Just follow the post from @Frischifrisch and use samfirm_reborn to get multiple part version.
Related
Hi,
I have a Samsung galaxy Wi-Fi 5.0 16 GB model:YP-G70EW (I think it was this update G70XXKPH)
What did I do you ask?
Click settings-about-check for updates it found one clicked okay it started to download and finished the installation
and my device keeps on rebooting. I see the Samsung logo from 19 seconds,
what should I do?
Thanks in advance.
You probably need to wipe your data and cache partition. That can be done by booting into recovery mode (Home+Vol Up+Power).
Thanks for your fast response, but the (home+volume up+power) does nothing
(Power+volup) I selected -wipe cache partition- did not work, so I chose to -wipe data/factory reset- no help also anymore tips?
By the way, in the android system recovery<3e> window. I see something else weird, This is exactly what it says
– – Copying media files...
Successfully copied meida files.
#Manual mode#
– – Applying Multi-csc...
Successfully applied multi–CSC.
I know that my English is that good but do you see something weird here or is it just me?
Does it even get into android or does it just keep rebooting from the samsung logo?
I don't think so, it shows the Samsung logo for 19 seconds(19 sec every time)and reboots.
I can't even shut the device down. Try to contact Samsung support but no response yet it's been almost 24 hours.
PS. Can anybody give me some e-mail addresses for Samsung support you can PM if you want.
Thx.
Wh1tedev1l said:
I don't think so, it shows the Samsung logo for 19 seconds(19 sec every time)and reboots.
I can't even shut the device down. Try to contact Samsung support but no response yet it's been almost 24 hours.
PS. Can anybody give me some e-mail addresses for Samsung support you can PM if you want.
Thx.
Click to expand...
Click to collapse
If you hold the power button it should shut it down.
The shutdown button did work, only after 10 seconds holding down luckily the screen stays on for 19 sec.
Wh1tedev1l said:
The shutdown button did work, only after 10 seconds holding down luckily the screen stays on for 19 sec.
Click to expand...
Click to collapse
if you try flashing a kernel and rom meant for your device it should work again.. it sounds like something just got messed up with the flashing process (which does happen occasionally).
Sent from my SGP5
I have never done this how should I proceed?(Please give as much details as you can)
It probably involves a micro-SD, luckily i ordered one two hours ago, should arrive tomorrow morning.
Thx
Guide to flashing http://youtu.be/0imhKnMtQ9A
Hi guys,
well I just got an e-mail from samsung support that I should get it serviced to get the issue fixed(after 2 e-mails they answered back, well… It's something)
They send a link http://www.samsung.com/us/support/service/request,
so I choose option 1
model code: ?? YP-G70EW but I don't see my code on their site, what the hell should I do with this.
e-mail address: (at least I know this one.LOL)
I wonder if I should have gone through Samsung Belgium
address http://www.samsung.com/be/ another problem I can't even find this product their! Or model number
Could you guys give me some tips what to do.
And bit more information about my product
Samsung galaxy Wi-Fi 5.0 16GB (with the physical bottom) so the international one(right?)
model number: YP-G70EW
And which version of Oden versions should I use, and link please.
which kernel and rom should I use link also please.
damn, I'm demanding today
First: If you really want to flash a ROM, your guarantee expires.
The version with the physical Homebutton is the international.
You should always use the newest version of Odin.
Here is the link:
http:// www.google.com/url? sa=t&rct=j&q = & esrc=s&source=web&cd=2&sqi=2&ved=0CDwQFjAB&url=http%3A%2F%2Fforum.xda-developers.com%2Fattachment.php %3Fattachmentid%3D581913%26d%3D1304094576&ei=xGh0T-_ AEqGr0QXO1JX3Dw&usg=AFQjCNF7sF0f2yJp0IxHp1ISlP2fzGKhtw
And here the links to the Stock ROMs:
France: http:// www.sammobile.com/firmware/? Page=3&t=1&o=1&m=YP-G70&r=1 #
Italy: http:// www.sammobile.com/firmware/? Page=3&t=1&o=1&m=YP-G70&r=1 #
Sweden: http:// www.sammobile.com/firmware/? Page=3&t=1&o=1&m=YP-G70&r=1 #
I know that Belgium is not included in the list, but the ROMs should work with your device.
I've had the same exact issue as yours except I decided to fix it myself rather then check it in to be serviced.
I was a complete noob when doing it and I've managed to soft-brick my device during the process, but it was fun and I quickly learned to unbrick it and flashed a new stock ROM.
That was an awesome journey into Android I recommend to anyone (recommend; no responsibilities tho).
Anyway if you decide to take this path, beware that there are several versions of the Galaxy player 5.0 (US, Europe and others), you must verify that the ROM you're about to flash matches your device version, otherwise you'll eat ****.
Anyway checkout my post and its replies, I'm sure it will be valuable to you:
http://forum.xda-developers.com/showthread.php?t=1546068
Sent from my YP-G70 using XDA
I have a galaxy player 4.0 and it keeps rebooting and it's because I tried to install a custom boot logo. I can still go in download mode and Odin mode but does anyone know a custom bootloader I can install so I can access the files on my device because if I can delete the file I want to then it will work again.
Hi all,
Just flashed the jellyblast rom onto my s5830i, it's all working except I've got no signal/service.
I've been reading around and found that I might have to install a radio? If so, does anyone have any help as to which one?
Any help much appreciated, or if you need more info please ask.
Cheers,
Jack.
jackpf said:
Hi all,
Just flashed the jellyblast rom onto my s5830i, it's all working except I've got no signal/service.
I've been reading around and found that I might have to install a radio? If so, does anyone have any help as to which one?
Any help much appreciated, or if you need more info please ask.
Cheers,
Jack.
Click to expand...
Click to collapse
Well I'm using jelly blast no problem... I'm guessing you're using 3.0.5 (latest) did you first flash 3.0.4? If not i suggest going back to stock then 3.0.4 then .5
You might of had some random conflict if you flashed from another custom ROM to Jelly Blast
Also what do you mean radio?
The app? That's included in Jelly Blast, well it is in 3.0.4 (that's what I'm using)
Oh and apparently I'm now meant to tell people to ask questions and stuff in the sticky thread (The one by "iamareebjamal"), or post this in the jelly blast thread to help keep the general section free from spam
The usual Xx James xX only on mobile (XDA Premium)
I think you've lost your IMEI (don't worry it's not lost, this rom somehow can't read your IMEI number). Please check your IMEI number by using *#06# on call screen.
If you can't see your IMEI number, install GalaxyToolbox and check the IMEI from there. If you can see the IMEI from GalaxyToolbox, it means IMEI is still there but rom can't read it.
Please install any other rom. (you can/should backup your IMEI by using GalaxyToolbox before doing anyting on your system)
jelly blast no service fix
Download these two files
Search Google for them I would attach links but I'm not allowed
(kernel-201211201515-E3-boot.zip)
(modulos201211201515-modules.zip)
1. copy the 2 zip files to your SD card
2.then boot the phone in recovery
3. Install the two packages one after the out her
4. Reboot
Your phone should now connect to your mobile network and you should be able to call and text
stuck on boot animation :'(
man wtf stuck on samsung logo only!!:crying:
sam_shah said:
man wtf stuck on bootanimation only!!:crying:
Click to expand...
Click to collapse
Flash stock rom via odin
sam_shah said:
man wtf stuck on samsung logo only!!:crying:
Click to expand...
Click to collapse
What version of the jellyblast rom are you running? Try downgrading the version before the one you are using and repete the steps (do it all at once) try this and post the results
unbricked...and rooted even but not able to install any new ROMs
When i install any new ROMs by CWR then only samsung logo apears with my phone model number..waited for 30 mins no action then back to stock !! Familliar to Rooting nd ROMs in HTC phones.. but wishing to learn for Samsung SGH-s5830i (ace)
Bricked my phone. Need help now
guppysir said:
Download these two files
Search Google for them I would attach links but I'm not allowed
(kernel-201211201515-E3-boot.zip)
(modulos201211201515-modules.zip)
1. copy the 2 zip files to your SD card
2.then boot the phone in recovery
3. Install the two packages one after the out her
4. Reboot
Your phone should now connect to your mobile network and you should be able to call and text
Click to expand...
Click to collapse
Thanks for bricking my phone.....
it doesn't work my phone can't go into CMW or boot now i would be extremely grateful for some help please.
@jrtbing, lets dig some graveyard mate, shall we First of all jellyBlast was band from XDA ages ago ( not to be mention there are far more sophisticated stable Rom @ Dev sub forum)
As for your problem goes, please remove your battery for ~1 Minute ( don't make any difference though, just for discharging purposes ).
put it back and try press and hold the Volume Up + Home keys and then long press the Power key till the start up screen with “Samsung Galaxy Ace GT-S5830i″ logo blinks for two times and you see your desired recovery screen.
If the combo keys provided don't be effective ( due to possible boot loop, corruption of your partitions; kernel ,,etc,,etc,,) we need to check your download mode by pushing (Volume(+) + Volume(-) + Power) simultaneously ,, still no use,, You probably hard-bricked your device mate. USB jig might be your last solution to force your device get into Download mode, nothing will be guaranteed though.
Hello,
Please help!... I am unable to use my phone after doing something that maybe I shouldn't have done!!
First let me go through some steps that led to the phone becoming unusable.
1) First I successfully rooted the phone (using instructions off the net)
2) I tested the rooting by clicking on the SuperSU App and granting the necessary permissions.
3) Next I downloaded the Titanium Backup and successfully backed up my phone
4) Then I decided to go back into the SuperSU (just to see what kind of things I could do with the superuserApp)... and a POP-UP Window appeared. Now I really can't remember the exact message but it basically was asking me if I wanted to perform some sort of conversion. Without giving it too much thought and like an idiot I just clicked on YES. The phone then rebooted and remained STUCK on the screen where the "Samsung Galaxy SII GT-I9100" message flashes up with a yellow triangle exclamation mark below (please see attached pic). It doesn't matter how long I wait or how many times I reboot the phone remains stuck on this screen.
Please note the following:
-- If I press (Volume Up + Home button + Power button) simultaneously the same screen appears (ie the Samsung Galaxy message) however long I keep the buttons pressed.
-- If I press (Volume Down + Home button + Power button) I get something different happening ie A warning message about custom OS (see attached pic) and when I press the Volume Up button to continue I get the screen with the Android symbol and the word downloading below it with some ODIN Mode information at the top of the screen (see attached pic).
I'm praying AND got my fingers arms & legs crossed that I haven't "bricked" the phone!!
Please please help!... I would really appreciate your assistance in getting my phone working again (if it's at all possible now).
Oh and apologies if I have posted in the wrong area.
Many thanks in advance.
Kieron
@Kieron139 as far as I know you have done something to your system which doesnt allows it to fully boot aka soft brick. The yellow triangle is just an download counter a bit. But you can reset that but I only did that when I sold it, triangle is cool.
What you can try is to download Odin on pc, follow odin guide in general I believe for the s2 and flash back to stock.
Tip: dont turn off your phone if download mode failed, just reconnect the cable.
@wulsic ... many thanks for the quick reply!
I have the ODIN program, I used it (with the appropriate jar file) when I rooted the phone. However I'm not sure how to flash is back to stock using the odin program, also I'm new to this site so can you tell me where I can find the odin guide explaining how to do this... or if there is a "how to"thread explaining step by step how to flash back to stock?
Kieron
@wulsic... I managed to find step by step instructions to flash back to stock, however as well as the ODIN program it says I need to have a copy of my stock ROM.... but where do I get this from?
@Kieron139 it tooksome timemy tablet hanged but here is a guide,
http://forums.androidcentral.com/sa...e-guide-using-odin-de-bloat-root-recover.html
You only need to find the galaxy s2 stock rom from internet and download it, the flash it in pda and see the guide for more details. Make sure you have the s2 firmware not aother one.
Edit: :/ that post timing. But I will find a link for you now.
@Kieron139 here find the s2 firmware from sammobile.com and samsung-updates.com
@wulsic ... that's super! will access the links, download the ROM and let you know how I get on!... but it may take me a little longer than it should as I'm going to take my time and follow the instructions carefully so I don't muck it up lol
@Kieron139 No problem, take the time. Better to do it slowly then bricking your phone. I will respond as fast as I can when you have a question but I can't answer directly maybe when your rom download is done. Goodluck! :good:
@wulsic ... I think I still need your help with identifying the correct stock ROM file. The two links you gave, I couldn't work out how to search for the file in the first one but in the second one when I searched using my model (ie GT-i9100) I got a list of downloads to choose from for different regions. Now I'm based in London UK and the phone is unlocked but was with the Three.co.uk network provider (I'm not sure if this information is relevant but I thought I'd mention it just in case). Anyway I've attached a screen shot of a part of the list that comes up but its not the compete list.
Please note I found another link describing how to flash back to stock and it mentions I need a file called "I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5".
Anyway could you please help me with choosing which firmware file I need to download?
Thanks
@wulsic Ooops forgot to attach the screenshot in prev reply
@Kieron139 in the first one you had to go to firnware, scroll down then enter device.
You dont need the exact android stock version from xwlsw just find a stock one from the 2 sites I provided and then download and flash it. I am trying to find and copy one for you but my tablet keyboard doesnt show up always, lowramdevice.
I see you tagged me again before I could finis typing my message xd.
I suggest to use xwms3 since its the latest stock version and should also work fine with your phone in UK.
Kieron139 said:
@wulsic Ooops forgot to attach the screenshot in prev reply
Click to expand...
Click to collapse
Any of the firmwares on the above screenshot should be fine as they all are genuine samsung stock roms for i9100
Download one of them and follow the guide which wulsic posted and you will be fine :good:
@wulsic ...ok will do, and sorry for being a pain! just want to make sure I don't go installing the wrong one
@-shaMe- Thanks
@wulsic Great news!... phones working again! :victory: :good::good::good:
Thank you so much for you help and for your patience!
I now have a working phone again
Best regards
Kieron
@Kieron139 Nice now if you have that problem again you know now how to fix it.
Also an tip for if you start flashing custom roms like cyanogenmod, recovery and kernel are builtin one boot.img so if you flash an recovery for stock but you have cyanogenmod then the rom will not boot anymore. (Cyanogenmod and other custom roms have recovery also builtin their rom.)
If your boot.img is corrupted and recovery/rom doesnt boot anymore then I suggest to flash an recovery with odin instead of reflashing the whole stockrom.
@wulsic ... Thanks for the tip!
Btw I'm still a bit new to this site but how do I "thank" someone for their help?... some sites have a button next to the replies which you can click to say if the reply was helpful, couldn't see anything like that here?
A couple of other quick questions. I'm very happy with my Samsung Galaxy SII but it is frustrating that it no longer receives any software upgrades/improvements. So which custom rom would you recommend? ie is cyanogenmod the best one?... also once a custom rom is installed can the phone still be rooted?
Cheers
K
@wulsic Ignore the "how to thank someone" question in my last message... I wasn't logged in so couldn't see the thanks button!! lol
@wulsic
There's a bunch of custom ROMS mentioned in the link below which will update my phone to android 4.4.4. What do you think of the ROMs and which would you recommend?
K
@wulsic
Ooops forgot to include the link! lol
Here it is... http://galaxys2root.com/category/galaxy-s2-roms/
Cheers
Hello everybody,
I have ran into lot of issues in my Samsung Galaxy S3 I-9300. I bought it from UK(unlocked) two years ago.
The issue started with the recharge issues. It shows as it is charging but it doesn't charge and some times the battery suddenly increases by 30-50% on phone restart. And then one day I started encountering phone restart issue. I started losing files that I had copied or created during those times on my external SD card. I once saw that I had android robot fallen with red exclamation mark in the recovery screen. And then one day my phone won't go ahead of Samsung logo so I did a factory reset. After factory reset I thought everything will be fine but still I had few issues so I installed Kies and did a firmware upgrade from the Samsung site. But the recovery robot was still down with red exclamation mark. I thought rooting will help me in fixing it so I rooted the phone but no help. I finally installed stock recovery from odin and it fixed it. Everything looked fine. But I still had files getting deleted from SD card and phone auto restart issue. And recharging issue resurfaced as well and I was not able to recharge from wall charger. I had to switch off my mobile and recharge it from USB cable. I keep it overnight for approx. 8-9 hours at a stretch ans still charging would be around 60-70%. Yesterday my phone restarted on its own and now its getting stuck at Galaxy logo screen. Its not even going to Samsung screen. I can't go to recovery mode but I can still go to download mode. I tried installing stock recovery firmware today from odin and it failed. I can install stock image from odin but I want some solution as I can't keep on doing it again and again.
P.S: I did factory reset twice and after factory reset every time I restart few old applications were getting installed automatically which I had not selected.
Please help me guys.
Update:
Tried flashing stock recovery and stock rom. Nothing worked. Have took capture of the ODIN screen to give more clear idea. Thanks.
deleted
I have added screenshot. Please take a look and help me people. I am really stuck. Thanks.
Can anybody please help me ? Atleast tell if it is possible to recover my mobile or not. Thanks and Happy New Year!!
Can somebody please give me a link to S3 Original Kernel file so that can try flashing it. Thanks
crazy access said:
Can somebody please give me a link to S# Original Kernel file so that can try flashing it. Thanks
Click to expand...
Click to collapse
Try the rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735 << there are two versions you will find the pit file in the 4.1 version download. If this fails or issues come back then it will need service repair.
Bro, it isn´t a software problem, its your battery, it needs to be changed
adaltavo said:
Bro, it isn´t a software problem, its your battery, it needs to be changed
Click to expand...
Click to collapse
I agree he may have a battery problem but that would not explain all the other issues with Odin and recovery etc. I would still recommend flashing rescue firmware first before paying out for a new battery.
Yeah, I guess he might have some problems with his rom, but is kinda wierd too. Hey Crazy Access, have you tried access to recovery from an apk?, some of them do it, like Quick Reboot, or quick boot, search for them in Google play, take a look on it
Thanks for the replies tallman43 and adaltavo.
Adaltavo, my phone is not booting at all. It's not going beyond S3 screen to Samsung logo so I can't try recovery from any apk.
I am going to try recovery method in the link provided by tallman43 and will come back with the results.
Meanwhile, if you have any other tips do tell me.
Thanks.
adaltavo said:
Yeah, I guess he might have some problems with his rom, but is kinda wierd too. Hey Crazy Access, have you tried access to recovery from an apk?, some of them do it, like Quick Reboot, or quick boot, search for them in Google play, take a look on it
Click to expand...
Click to collapse
Hi. I tried following the steps in rescue link and still was not able to fix it. I have attached screenshot of the error. Hope it gives you more clarity where I am stuck.
Any help is appreciated.
In ODIN Mode my screen reads:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (2 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Ring a bell ??
crazy access said:
Hi. I tried following the steps in rescue link and still was not able to fix it. I have attached screenshot of the error. Hope it gives you more clarity where I am stuck.
Any help is appreciated.
Click to expand...
Click to collapse
You did not read the instructions in the rescue thread I gave you!! Are you seriously trying to brick your device? Why have you got nand erase all ticked in Odin this is a bad move where does it say to tick this!
Sorry to be harsh but you need to read instructions fully before attempting anything with your phone.Ttry again with Odin and follow the instructions exactly as posted in the screenshot in the rescue thread also maybe try Odin 1.85. But it looks like you have messed up your device even more. (Recommend Service repair) :crying:
Hi tallman. Thanks for the response. I actually downloaded the file from the link you gave, and there were four files but there was no pit file in it. So when I did search again in the forum for pit file I got another link where a user had the same problem and he did ticked the options so I tried that as well. And you were not harsh. It is irritating when you are trying to help and I didn't read the instructions carefully
I will try again and post results here.
Thanks for the help once again
tallman43 said:
You did not read the instructions in the rescue thread I gave you!! Are you seriously trying to brick your device? Why have you got nand erase all ticked in Odin this is a bad move where does it say to tick this!
Sorry to be harsh but you need to read instructions fully before attempting anything with your phone.Ttry again with Odin and follow the instructions exactly as posted in the screenshot in the rescue thread also maybe try Odin 1.85. But it looks like you have messed up your device even more. (Recommend Service repair) :crying:
Click to expand...
Click to collapse
After trying everything the ODIN still failed, so went to service station where they told that internal memory is corrupt and I need to replace motherboard. Thanks tallman and adaltavo for trying to help me out. Appreciate it. Hunting for new phone now.
Hi gang!
I have a Moto E 2nd Generation here that was having some issues, browser crashing, slow downs, overheating issues due to multiple apps running, etc. So I decided to log into TWRP and attempt to do a factory reset. After this factory reset was done now I attempt to log into fastboot, which gives me the options of start, restart, factory, etc. I am just receiving a boot loop and nothing more. The steps to get this corrected is a bit jumbled and confusing, I must admit. I have installed ADB on my computer in hopes that this will be straightforward. I have downloaded some system images which I thought would help the process, negative. So if someone could help me this would be greatly appreciated.
- John
CheapStudent
cheapstudent said:
Hi gang!
I have a Moto E 2nd Generation here that was having some issues, browser crashing, slow downs, overheating issues due to multiple apps running, etc. So I decided to log into TWRP and attempt to do a factory reset. After this factory reset was done now I attempt to log into fastboot, which gives me the options of start, restart, factory, etc. I am just receiving a boot loop and nothing more. The steps to get this corrected is a bit jumbled and confusing, I must admit. I have installed ADB on my computer in hopes that this will be straightforward. I have downloaded some system images which I thought would help the process, negative. So if someone could help me this would be greatly appreciated.
- John
CheapStudent
Click to expand...
Click to collapse
Heyo John!
I can try to help since I have managed to overcome my bootloop issue and flash a custom ROM into my phone. Could I ask, are you trying to also install a custom ROM? And what version of TWRP do you have?
I had the bootloop issue because of an outdated TWRP and had to flash the latest one, which thankfully worked!
Let me know! ^_^
testerexp345 said:
Heyo John!
I can try to help since I have managed to overcome my bootloop issue and flash a custom ROM into my phone. Could I ask, are you trying to also install a custom ROM? And what version of TWRP do you have?
I had the bootloop issue because of an outdated TWRP and had to flash the latest one, which thankfully worked!
Let me know! ^_^
Click to expand...
Click to collapse
Hello testerexp345,
Thank you for the reply and the assistance, I am not sure if TWRP is installed anymore as I can't get passed the bootscreen on the phone. I hold down the volume down and power button to get the options of factory reset, shut down, restart, etc. However all these options lead back to the boot screen looping over. The ROM that I had installed on the phone was from an online seller that paired the phone with a SIM card that allowed unlimited data service, which was great for my business since I am out much of the week traveling. Any insight would help, as when it comes to flashing devices and cell phones... let's just say I am a newbie still
John C.
cheapstudent said:
Hello testerexp345,
Thank you for the reply and the assistance, I am not sure if TWRP is installed anymore as I can't get passed the bootscreen on the phone. I hold down the volume down and power button to get the options of factory reset, shut down, restart, etc. However all these options lead back to the boot screen looping over. The ROM that I had installed on the phone was from an online seller that paired the phone with a SIM card that allowed unlimited data service, which was great for my business since I am out much of the week traveling. Any insight would help, as when it comes to flashing devices and cell phones... let's just say I am a newbie still
John C.
Click to expand...
Click to collapse
To boot in bootloader while you stuck on bootlogo
Press and hold power button and volume button , and when screen goes off, quickly release power button only . don't release volume down button . now you will boot in bootloader
hamxa266 said:
To boot in bootloader while you stuck on bootlogo
Press and hold power button and volume button , and when screen goes off, quickly release power button only . don't release volume down button . now you will boot in bootloader
Click to expand...
Click to collapse
Hello hamxa266, okay I was able to get into the bootloader. All the options I choose restart the phone and put it back it back into a bootloop. I am not very familiar when it comes to using ADB.
John C.
cheapstudent said:
Hello hamxa266, okay I was able to get into the bootloader. All the options I choose restart the phone and put it back it back into a bootloop. I am not very familiar when it comes to using ADB.
John C.
Click to expand...
Click to collapse
I guess now you need to flash stock frimware using fastboot. if you are not familiar with then go and get familiar with it . It is not too hard just read few posts and thats it ..
If you need any help i am here!
Hi, I have the same issue, but I can't get it into recovery, but... Can I use "fastboot boot recovery.img"? for go into recovery for a factory reset and solve it, or I need to do something more, I have the same Moto, surnia with the bootloader locked, please I need help
testerexp345 said:
Heyo John!
I can try to help since I have managed to overcome my bootloop issue and flash a custom ROM into my phone. Could I ask, are you trying to also install a custom ROM? And what version of TWRP do you have?
I had the bootloop issue because of an outdated TWRP and had to flash the latest one, which thankfully worked!
Let me know! ^_^
Click to expand...
Click to collapse
Can u provide link for latest TWRP...??
mkranthikmr said:
Can u provide link for latest TWRP...??
Click to expand...
Click to collapse
This is the link for official twrp website
http://twrp.me/motorola/motorolamotoelte.html
Or you could use squid's twrp from here:
https://forum.xda-developers.com/mo.../twrp-squid-twrp-recovery-moto-e-lte-t3137649
shreyas_123 said:
This is the link for official twrp website
http://twrp.me/motorola/motorolamotoelte.html
Or you could use squid's twrp from here:
https://forum.xda-developers.com/mo.../twrp-squid-twrp-recovery-moto-e-lte-t3137649
Click to expand...
Click to collapse
Thank you bro... Got it already...:good: