I want to increase the speaker volume overall, Dolby Digital Plus did it nicely but it had a big problem: I had to open the app everytime - Is there anything the increased the volume/talking from speaker that just stay on all the time?
ViperFX works wonders for this
razerphynx said:
ViperFX works wonders for this
Click to expand...
Click to collapse
I tried ViperFX on magisk and could not hear anything different. Tried switching to legacy and compability mode.
fobtob387 said:
ViperFX works wonders for this
Click to expand...
Click to collapse
I tried viperfx, but I hate that the sound slowly geta louder like when I play YT it start low then the volume get high which is the settings I prefer do you have idea on how can I set it like permanent without delay?
Related
Hi, is possible increase the volume of ringtones and notifications with the service menù?
Have you turned on the xLoud option under the normal settings option?
Settings -> Sound -> Sound Enhancements. Select the Settings tab at the top and turn on xLoud. Makes a big difference.
saquib said:
Have you turned on the xLoud option under the normal settings option?
Settings -> Sound -> Sound Enhancements. Select the Settings tab at the top and turn on xLoud. Makes a big difference.
Click to expand...
Click to collapse
even with Xloud its still Low , compare it to any other phone and you will see its very low , whats the use of Stereo Speakers then? that's really disappointing .
shadows of yesterday said:
even with Xloud its still Low , compare it to any other phone and you will see its very low , whats the use of Stereo Speakers then? that's really disappointing .
Click to expand...
Click to collapse
It's not going to be VERY loud due to the waterproofing of the phone.
shadows of yesterday said:
even with Xloud its still Low , compare it to any other phone and you will see its very low , whats the use of Stereo Speakers then? that's really disappointing .
Click to expand...
Click to collapse
If you have root you can try Viper4Android:
http://forum.xda-developers.com/showthread.php?t=2191223
It boosts volume as well as quality (you have to make a balance though or you could blow your speakers from too much of a boost)
HussainQ said:
If you have root you can try Viper4Android:
http://forum.xda-developers.com/showthread.php?t=2191223
It boosts volume as well as quality (you have to make a balance though or you could blow your speakers from too much of a boost)
Click to expand...
Click to collapse
Viper4Android doesn't actually boost the Max volume of the speakers. I've tested it with Xloud on and when i change things in Viper4Android there is absolutely no difference until you lower the volume. For example, putting the volume at 50% will be louder with Viper4Android then without.
Max all the equalizer settings then turn off Clear Audio and Dynamic Audio. Clarity will be lower but the volume will be higher.
HussainQ said:
If you have root you can try Viper4Android:
http://forum.xda-developers.com/showthread.php?t=2191223
It boosts volume as well as quality (you have to make a balance though or you could blow your speakers from too much of a boost)
Click to expand...
Click to collapse
iArvee said:
It's not going to be VERY loud due to the waterproofing of the phone.
Click to expand...
Click to collapse
Dear,
i had Samsung galaxy s5 , which has only 1 rear speaker , and the sound was much louder than this ! , if people have done boosting Tweaks with Root , then Sony Should Push an Update .
phone calls ringing Volume & Notifications , how come you have Stereo Speakers & when your phone rings , one speaker is working !!! that's really *****
Alright, I'm not an audiophile & I wouldn't know what those many sliders in equalizer apps do, but one of the first things I do when I setup windows in a new laptop is tick the Loudness equalization option. What it does is it reduces the volume of incredibly loud videos, increases the volume of low volume videos and I never have to fiddle around with the volume settings from video to video just to get it equally loud. Is there any similar mod for android that would allow me to normalise volume systemwide? I'm using a rooted Kenzo Xiaomi redmi note 3 with MiUI lollipop 5.1.1.
looking for that too
yyyt1 said:
looking for that too
Click to expand...
Click to collapse
Use Dolby Atmos. It has a volume leveler feature. I'm using the Magisk module Dolby Atmos r6.5b by Yash98. Worked extremely well.
I used these settings:
imgur.com/a/UIg8a
downloaderfan said:
Use Dolby Atmos. It has a volume leveler feature. I'm using the Magisk module Dolby Atmos r6.5b by Yash98. Worked extremely well.
I used these settings:
imgur.com/a/UIg8a
Click to expand...
Click to collapse
thanks man. I've installed it and seems like it works. gonna test it more later.
Hi, can anybody help me with speaker loud mode? I have Dolby Atmos And viper4 in my phone but IT isnt loud enough. What can I do? Some apps or zips modes through the TWRP ? Or some Rom with good volume and sound? Thanks alot
Hi,what ROM are you using now?
I'm using Global Stable rom 8.2.1.0 for RN4 MTK and it is very loud even without Dolby Atmos...for example,i keep it on 60-70% of volume and is quite loud...with Dolby Atmos it is even louder (I have to keep it below 40%) and i'm the guy who has hearing problems (not deaf but my hearing is not good as it should be)...
I had the same issue with HTC and there was problem with the speaker itself...
Try to air-blow it a bit (maybe it's stuck with dust and dirt)...if that doesn't work,then maybe the speaker has gone bad [emoji20]
Sent from my Redmi Note 4 using Tapatalk
Dolby Atmos is sufficient; make a manual profile in the tab you prefer, and set the EQ like you see in the pic. Depending on the situation, enable dialogue enhancer or volume leveler, as you see fit. Keep in mind that WhatsApp audio clips are not affected by Atmos, all the remaining media is.
I think dolby is loud enough, first make sure your phone (music player) connect to dolby. You can open dolby to check, and active the volume leveler. And i think use one surround sound, i suggest use dolby.
Now I'm using dolby lenovo version (install from magisk). But if dolby/viper still not loud, you can install volume step increase from magisk
alwan_afif said:
I think dolby is loud enough, first make sure your phone (music player) connect to dolby. You can open dolby to check, and active the volume leveler. And i think use one surround sound, i suggest use dolby.
Now I'm using dolby lenovo version (install from magisk). But if dolby/viper still not loud, you can install volume step increase from magisk
Click to expand...
Click to collapse
How... .apk supprt my device
vinitmhala said:
How... .apk supprt my device
Click to expand...
Click to collapse
Can you explain more? .apk?
funny210980 said:
Hi, can anybody help me with speaker loud mode? I have Dolby Atmos And viper4 in my phone but IT isnt loud enough. What can I do? Some apps or zips modes through the TWRP ? Or some Rom with good volume and sound? Thanks alot
Click to expand...
Click to collapse
I recommend viper 4 ,
funny210980 said:
Hi, can anybody help me with speaker loud mode? I have Dolby Atmos And viper4 in my phone but IT isnt loud enough. What can I do? Some apps or zips modes through the TWRP ? Or some Rom with good volume and sound? Thanks alot
Click to expand...
Click to collapse
Just use a custom kernel and kernel adiutor, go to the sound setting and adjust accordingly.
Where shall I found in kernel auditor volume Steps? I dont have IT there.
funny210980 said:
Where shall I found in kernel auditor volume Steps? I dont have IT there.
Click to expand...
Click to collapse
Are you running a custom kernel?
I find I can't lower the notification volume and ringtone volume low enough.
Does anyone know how to change the volume steps? I have sound assistant but it only works for media volume...
I'm rooted if it helps and I've tried the AOSP based rom solution of changing the build prop but with no success.
Thanks for any help!
Have you tried "sound assistant" app. It is from Samsung and has function you are looking for.
Chaudhry69 said:
Have you tried "sound assistant" app. It is from Samsung and has function you are looking for.
Click to expand...
Click to collapse
If you check the original post you'll have your answer lol
EmRav said:
If you check the original post you'll have your answer lol
Click to expand...
Click to collapse
Ah my bad, don't know how I missed it. It is possible in two ways:
01- Get a custom kernel with volume modification support. I use a Galaxy S7edge with Surround sound, this makes the sound loud and more immersed but it has a drawback. The low threshold of volume is too high same as yours. I usually have a problem with the in-call earpiece audio which is too loud for me. I use MoroKernel and luckily a recent update brought the feature of MoroSound providing fine control over gains of 2-microphones, earpiece, and main speaker. You can also look for a kernel with such features for your device.
02- Manually modifying the sound configuration files. That is a bit difficult but good research with a bit of experimenting will eventually get you there.
Chaudhry69 said:
Ah my bad, don't know how I missed it. It is possible in two ways:
01- Get a custom kernel with volume modification support. I use a Galaxy S7edge with Surround sound, this makes the sound loud and more immersed but it has a drawback. The low threshold of volume is too high same as yours. I usually have a problem with the in-call earpiece audio which is too loud for me. I use MoroKernel and luckily a recent update brought the feature of MoroSound providing fine control over gains of 2-microphones, earpiece, and main speaker. You can also look for a kernel with such features for your device.
02- Manually modifying the sound configuration files. That is a bit difficult but good research with a bit of experimenting will eventually get you there.
Click to expand...
Click to collapse
Any chance you know how to mod the sound config files on an S21? Unfortunately there are no custom kernels yet for the Exynos version
EmRav said:
Any chance you know how to mod the sound config files on an S21? Unfortunately there are no custom kernels yet for the Exynos version
Click to expand...
Click to collapse
Yes, go to /etc/mixer-gains.xml and edit it. Drawback is your device entire volume range will be affected like for media and stuff. One more way and probably the more practical one just hit me.
Find your ringtone and notification tone from /system/media/audio/ or download them from google and use a software like Audacity or Adobe Audition to reduce their volume.
You reduce your phone's volume to the lowest and match pc's volume with it. Then reduce the audio gain in the software until you feel comfortable with it. Export it and use it.
For anyone interested. My solution ended up being the following, with my end goal being too optimize my audio with Dolby and have the volume still be lower (but optimized) on the phone speaker.
I tried a ton of different apps, a few magisk volume steps modules, ViperFX with Dolby and finally I found a good solution.
Turn off the default Dolby stuff on the phone.
Install Dolby Atmos ZTE A2019 PRO for magisk (google it and find it on GitHub).
Reboot.
Install JamesDSP from ZackPTG5's website.
Reboot.
Install Audio Modification library to use Dolby and JamesDSP at the same time.
Reboot.
Create a custom equalizer in Dolby and try max things out as much as possible with it still sounding great.
Open JamesDSP, go to Speaker, set limiter threshold to -5, go to post gain and set it to -10. Turn on the master switch. Leave everything else unless you want to change any Bluetooth or headphone settings. Hide the persistent JamesDSP notification.
Reboot.
Install Audio Compatibility module with all the recommended settings.
Reboot.
Result, Dolby Atmos handles all the audio, increases the volume, applies optimizations system wide. However because volume steps are tricky to change on this phone we are stuck with the phone speaker volume being too loud even on the lowest setting. JamesDSP lowers the volume to the built-in speakers but we still get the Atmos experience we want. Everything else I assume you want to be louder anyway, like Bluetooth and headphones.
Audio Modification Library makes James and Dolby work together.
Audio Compatibility Patch fixes some issues with certain apps not using the sound mods.
Success! You get Dolby Atmos everywhere, but it doesn't max out the phone speaker volume, but it will still max out everything else. Oh and you can also change whatever other settings you want in JamesDSP.
I have searched through here for hours now... I'm trying to figure out how to boost the volume on my Google pixel 6. Does anyone know how to make the volume louder coming out of the speaker?
I use the Wavelet app to increase volume, makes a huge difference. I turn on Legacy Mode, Graphic Equalizer & Limiter.
In Graphic Equalizer, use Personal Preset & turn up everything.
In Limiter, zero everything (threshold can be -2) & increase Post-gain to max.
mannikon said:
I use the Wavelet app to increase volume, makes a huge difference. I turn on Legacy Mode, Graphic Equalizer & Limiter.
In Graphic Equalizer, use Personal Preset & turn up everything.
In Limiter, zero everything (threshold can be -2) & increase Post-gain to max.
Click to expand...
Click to collapse
I tried out wavelet as an experiment with my pixel 6 unrooted, and the limiter regardless of the post gain settings causes too much distortion for my ears. Root your phone and install Viper, then you can gain it to max, with zero distortion.
isnt there volume boost in accessibility?
mannikon said:
I use the Wavelet app to increase volume, makes a huge difference. I turn on Legacy Mode, Graphic Equalizer & Limiter.
In Graphic Equalizer, use Personal Preset & turn up everything.
In Limiter, zero everything (threshold can be -2) & increase Post-gain to max.
Click to expand...
Click to collapse
it´s working, thanks
santacruzmofo said:
I have searched through here for hours now... I'm trying to figure out how to boost the volume on my Google pixel 6. Does anyone know how to make the volume louder coming out of the speaker?
Click to expand...
Click to collapse
Try Volume Booster GOODEV from the playstore.
Vickems said:
Try Volume Booster GOODEV from the playstore.
Click to expand...
Click to collapse
i prefer speakerboost pro