[RECOVERY][UNOFFICIAL] [c1q|c2q] [Snapdragon] Sky Hawk Recovery Project V3.0 [01022021] - Samsung Galaxy Note 20 Ultra ROMs, Kernels, Recove

[RECOVERY][UNOFFICIAL] [c1q|c2q] [Snapdragon] Sky Hawk Recovery Project V3.0 [01022021] - Samsung Galaxy Note 20 Ultra ROMs, Kernels, Recove

Maintainer: jimbo77
Maintainer: whodat711
Based On: afaneh92 TWRP Device Tree
TWRP Version: <3.5.1>

Reserved

Very excited about this

Reserved #2

working on exynos?

AboodySahhaf said:
working on exynos?
Click to expand...
Click to collapse
No. This is Snapdragon only

Nice to see another recovery in the mix . I was using OrangeFox , gonna try this out . Thanks

Thank you, it looks great and simplifies the way Recoveries are used . Hope you keep it going. Loving what i'm seeing so far .

working on N986N?

Newstar94 said:
working on N986N?
Click to expand...
Click to collapse
It does. I actually have the same device model. Download the recovery for c2q.

Does this support ADB transfers?

gcrutchr said:
Does this support ADB transfers?
Click to expand...
Click to collapse
Yes. File transfer and adb sideload are both supported

jimbo77 said:
Yes. File transfer and adb sideload are both supported
Click to expand...
Click to collapse
thank you

This looks great!

Thank you Jimbo77

Related

[RECOVERY] Redwolf Twrp for HARPIA[BETA]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Red Wolf Recovery is custom recovery based on TWRP source code however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.
Based on TWRP version: 3.2.1
For device: Harpia
Authors build: Aki
Developers: ATG Droid
Thanks: Special Thanks to squid2 for his source, .z31s1g (for the base of his theme), osm0sis (for his bootimage binaries), etc.
Features:
Code:
Translated to EN & CZ
- Password protection
- Incremental OTA Support
- Support automatic reboot after the restore process
- Advanced deactivation of the stock recovery
- Support for automatic deactivation of the dm-verity & forced encryption...
- Recovery can notify you about the completed backup/restore/installation using the notification diode & vibration.
- A lot of other things, just look at it ;)
* Changes for security reasons *
- MTP isn't starting until user enter correct password
- Deactivated support of the custom themes
Points to be noted down:
Code:
[COLOR="red"]- get out of here if you are pirating apps. this recovery is not for you[/COLOR]
- always up-to-date with the latest TWRP changes
- compiled on omnirom-7.1 source
- kernel compiled inline with the recovery
- There isn't bug with reboot from recovery to recovery
- more languages
- other improvements from Features and Changelog lists
Bugs:
Code:
Flashlight toggling doesn't works.
Tap to wake doesn't works.
Installation instructions:
First unlock bootloader
To temporarily boot this recovery:
Code:
fastboot boot recovery.img
To permanently flash it:
First Method(If no twrp installed before:
Code:
fastboot flash recovery.img
Second Method(If you have twrp):
Code:
1.Go to twrp.
2.Choose Install.
3.Tap on install image.
4.Navigate to where you have downloaded the recovery.
5.A prompt will come asking partition
Choose recovery(be very careful).
6.Swipe to flash it.
Both methods are independent of each other and you can choose whichever you want.
For fastboot methods install proper drivers and boot to bootloader/fastboot mode before executing commands.
Downloads:
Download Link For Harpia:
https://www.androidfilehost.com/?fid=673956719939835336
Warning:
Please remember that recovery with password protection isn't still a full protection for your phone. Red Wolf can only prevent unauthorized access to your device from recovery. But your device can be still reinstalled using fastboot.
XDA:DevDB Information
REDWOLF RECOVERY, Tool/Utility for the Moto G4 Play
Contributors
@ki, squid2
Source Code: [url]https://github.com/RedWolfRecovery[/URL]
Version Information
Status: Beta
Beta Release Date: 2018-04-17
Created 2018-04-16
Last Updated 2018-04-16

Changelogs
* Initial Release

Reserved

request password to enter for the first time what is it?

CyanonyMouse said:
request password to enter for the first time what is it?
Click to expand...
Click to collapse
Yes please help!!!

I have uploaded the wrong build
You have to wait for the next build

Download link updated:fingers-crossed:
https://www.androidfilehost.com/?fid=673956719939835336

Install Instructions updated.
#Stay_tuned
#Redwolf

@ki said:
Install Instructions updated.
#Stay_tuned
#Redwolf
Click to expand...
Click to collapse
works perfect install lineage to test it with this recovery and everything was normal good work

[RECOVERY][SHARE] SkyHawk Recovery Project

SkyHawk Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
SkyHawk Recovery Supports Treble & Non Treble Roms
FEATURES:
* Supports Treble and non-Treble ROMs
* Supports F2FS
* Increased compatibility with TWRP
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk [Root & UnRoot]
* EDL Support
* Hal3 / CameraAPI2 enabling/disabling
* Recovery Locking - Pattern/Password Lock
* Manage Partition
* ADB & Sideload
* Clear fingerprints.
* File Compress & Unpack archive
* Better language support
* Optimized versions of community scripts
* Choice of theme (black, dark, etc)
* Choice of color scheme
* Alternative lockscreen
* And many more, flash right now to find out!
Instructions
1. Download the zip file to your device
2. Reboot to your custom TWRP-based Recovery
3. Install the zip file as a normal zip
4. Then reboot into SkyHawk recovery after installation
5. Enjoy!
Download :
SkyHawk Recovery Project = Link
Credits
* TeamWin - for TWRP
* aarish124
* daemon1024
* dni9
* dr-tsin
* epicx67
* giovix92
* reignz3
* tunasahinn
* And All other devs
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2019-07-03
.

Reserved

Reserved this also

Very nice work, I'm really liking what you've done here.

How to install the Recovery?
If I wanted to go back to TWRP, how would I do that?

bictu said:
How to install the Recovery?
If I wanted to go back to TWRP, how would I do that?
Click to expand...
Click to collapse
read instruction section in 1st page.....this recovery is based on normal twrp
and yes you can go back to your normal twrp when you want just select img file of your twrp.img file

Definitely nice to see an alternative to TWRP for potter! Great work. Haven't done much testing but it seems stable on my initial testing

Tweaks dont working
Tweaks dont working :'(

The new UI looks refreshing!!!
I was just thinking that it has been ages since potter received any update for TWRP
Noob user here. What are the differences or additional features compared to TWRP? It would be nice if they were mentioned in the post.
The new UI looks refreshing and a bit intuitive and relaxing for a novice user

PratyushJayachandran said:
I was just thinking that it has been ages since potter received any update for TWRP
Noob user here. What are the differences or additional features compared to TWRP? It would be nice if they were mentioned in the post.
The new UI looks refreshing and a bit intuitive and relaxing for a novice user
Click to expand...
Click to collapse
this recovery is using twrp file but the difference is few extra option/features in custom recovery

gourabpa said:
this recovery is using twrp file but the difference is few extra option/features in custom recovery
Click to expand...
Click to collapse
Thanks for the recover, lots of good things, could you please update it to 2.2

Thread closed at OP request
Thread closed at OP request

[RECOVERY] [S8/S8+] Sky Hawk Recovery Project 2.1

Maintainer: Renatoh
Based On: TWRP
TWRP Version: 3.3.1-0

Treble suport..???

Please help me.
Usb otg connecting from TWRP v3.3.1-0, but cannot connect with skyhawk recovery.
SM-G950F

en-chan said:
Treble suport..???
Click to expand...
Click to collapse
Install HadesTreble for it.

hmm
Androkai said:
Install HadesTreble for it.
Click to expand...
Click to collapse
did you test?

Could you please add Chinese translation?maybe I can help you translate words.

Beautiful work, thanks

RuizLenatoh said:
did you test?
Click to expand...
Click to collapse
Yep, I've used it for 2 days, no problems.
But i still prefer to use One ui on it for now.

Great recovery. I'm happy to have Magisk support.

Is there any news ?

this is more better than stock twrp . thanks for your work

Dont works on S8
Do not work on my galaxy s8. when i want to install it i boot to twrp. when i flash it with some apps i got errors. when i flsh just the image twrp says dont works because img is to big for your phone. please help

[UNOFFICIAL][RECOVERY] OrangeFox Recovery Project [22/07/20]

OrangeFox Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
OrangeFox isFREE SOFTWARE
DOWNLOAD
HERE
INSTALLATION
0. Backup your ROM
1. Download the OrangeFox zip and img files to your device
2. Boot into the an existing TWRP
3. Flash OrangeFox img file to Recovery Ramdisk
4. Reboot recovery, it should boot into OrangeFox
6. Flash OrangeFox zip file
7. The recovery should reboot automatically
8. Flash magisk
9. Enjoy!
CREDITS
* TeamWin - for TWRP
* The OrangeFox Team - for your hard work
* All our testers - for your patience and help
FEATURES
* Supports Treble and non-Treble ROMs
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* White Flashlight
* Password, torch, led
* Support for custom ROMs
* Better language support
* Optimized versions of community scripts
* Fox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more!
SCREENSHOTS
HERE
R11 HERE
XDA:DevDB Information
[RECOVERY] OrangeFox Recovery Project, Tool/Utility for the OnePlus 7
Contributors
DahakePL
Source Code: https://gitlab.com/OrangeFox
Version Information
Status: Testing
Created 2020-07-06
Last Updated 2020-07-25

Reserved
Auto flashing of DFE or DM verity **might** be broken - flash manually if you choose to do so

Reserved

Hey thanks for your work!
Followed the procedure, flashed img, then zip from TWRP 3.4 and EvoX custom ROM. Flashed successfully, booted to OFRP. But then fails to boot to system. Always boots to recovery.
Did I miss something??

nishant_713 said:
Hey thanks for your work!
Followed the procedure, flashed img, then zip from TWRP 3.4 and EvoX custom ROM. Flashed successfully, booted to OFRP. But then fails to boot to system. Always boots to recovery.
Did I miss something??
Click to expand...
Click to collapse
Flashed magisk after the rom?
Also, try using TWRP 3.3. Flash img as recovery ramdisk then after rebooting to OFR flash the OFR ZIP - then rom - then magisk.
It was tested and confirmed that it works and boots roms so it should work fine.

How does it handle encryption, is it able to decrypt?
Thanks for sharing the work!

droidvark said:
How does it handle encryption, is it able to decrypt?
Thanks for sharing the work!
Click to expand...
Click to collapse
Yes, works fine

Update - 22.07.20
The thread has been updated.
OrangeFox R11 is out!
The UI received a fresh coat of paint
Here's the changelog - https://wiki.orangefox.tech/en/changelog
Here are some screenshots I took - https://imgur.com/a/3Hmco5g
Please report any issues you find. Take logs, screenshots of the problems and post here.
Best regards

Great job thanks for keeping our device with more recovery options

[Discontinued][RECOVERY][UNOFFICIAL] SHRP for ZTE Axon 10 Pro

I'm pretty sure you can't do fastboot flash recovery because a/b devices don't have a recovery partition

ChrispyStrips said:
I'm pretty sure you can't do fastboot flash recovery because a/b devices don't have a recovery partition
Click to expand...
Click to collapse
Correct, the default shrp thread template had that i forgot to change it.

twrp -> shrp
how to upgrade from twrp?
from twrp install shrp-los16_boot.img to "Install Recovery Ramdisk" or "Boot" ?

Install Recovery

_ron_ said:
how to upgrade from twrp?
from twrp install shrp-los16_boot.img to "Install Recovery Ramdisk" or "Boot" ?
Click to expand...
Click to collapse
Go to install select boot partition, then look for shrp-los16_boot.img and flash it.

It appears this build is missing some supporting scripts / files. I've tried a few of the Tweaks (Disable Encryption is my main interest) and SHRP seems to be looking for supporting files. Are these available separately? If so, where may I download them and into what folder should I put them?

karlnorth said:
It appears this build is missing some supporting scripts / files. I've tried a few of the Tweaks (Disable Encryption is my main interest) and SHRP seems to be looking for supporting files. Are these available separately? If so, where may I download them and into what folder should I put them?
Click to expand...
Click to collapse
If your trying to use the disable encryption from shrp that option does not work, flash this instead:

Better Mobile App

welcome