Oppo A52/A72/A92 Android 11 update via VPN - OPPO A72 Guides, News, & Discussion

Hi,
I managed to get the Android 11 update with a bit of stuffing around and thought I would share for everyone else, I did this on a unlocked Australian variant bought from Optus, you're mileage may vary.
This will activate dual sim mode on the phone with a single IMEI, I left my location set to Europe so it is upto you if you follow the last step to remove Dual Sim Mode.
You will need to backup anything you don't wish to lose as a full factory reset is required.
I did some digging and this will work with the same rom on A52, A72 and A92.
Could I get a moderator to cross post this to the other device forums please?
Requirements:
OPPO A72/A52/A92 - My bootloader is locked, My simlock is off
CPH2067_11_A.54 Latest European ROM for the device - Download Here: https://support.oppo.com/nl/software-update/software-download/?m=A72
Oppo Free Unlock Tool - https://forum.xda-developers.com/t/...de-to-coloros-11-and-enable-dual-sim.4191787/
A Google account to download ExpressVPN (This is the second last step so leave for now)
A Windows PC with a internet connection
WIFI or Mobile data on phone.
Latest ADB Drivers - https://adb.clockworkmod.com/
Instructions:
1) Backup all settings and user data.
2) Remove all accounts and screen lock security settings on phone.
3) Format all data, factory reset phone.
4) Download Oppo Free Unlock Tool from the link provided to PC.
5) Follow these instructions to install Microsoft Loopback Adaptor -
6) Open Device Manager and expand the Network Adapters category.
7) Find your Loopback Adaptor and double click it to open its properties.
8) Go to the Advanced tab and find the Network Address option in the Property pane.
9) Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
10) Install ADB Drivers.
11) Extract OPPO Free Unlock Tool, You're antivirus may give a false positive so you will have to manually add an exception for the tool.
12) Go to where you extracted the unlock tools. Open Sec5.exe.
13) Plug in phone via USB and select "Transfer Files".
14) Enable developer options on phone and activate USB Debugging.
15) Press Allow when prompted to give PC ADB access.
16) Open Sec5 window.
17) After about a second, a string of numbers and letters should show up in the left pane, Press Start Unlocking and few seconds later, "OK" should start flashing in the right pane.
18) Press stop unlocking and disconnect phone.
19) Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. (Take note of the one highlighted in green as you will need this in the final step).
20) Choose this one: "Europe EUEX" and click Ok you're phone will restart.
21) Download the rom from provided link to the phone and install through recovery mode.
22) Add your google account and download ExpressVPN from Play Store.
23) Open ExpressVPN and start 7 day trial then set to Netherlands server.
24) Goto Settings then Software Update and you will see Android 11 available to download.
25) Click Download then when complete Click Install
26) Remove Google Account from phone and factory data reset again.
27) Use instructions 12-20 to set your phones location back to your original setting.
That's All Folks

@MuntedJester THREAD CLOSED as duplicate of
Android 11/ColorOS 11 OPPO A72 Update with VPN
Hi, I managed to get the Android 11 update with a bit of stuffing around and thought I would share for everyone else, I did this on a unlocked Australian variant bought from Optus, you're mileage may vary. This will activate dual sim mode on the...
forum.xda-developers.com
The thread has also been moved from the development section into this sub-forum.
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse
Also review the sticked "Device Forum Rules (Read before posting)" with special focus on the conditions what threads qualify for the development section.

Related

[Q] Huwei U8652 root/rom help!

I just acquired a Huwei U8652. I guess it's supposed to be a lot like the Sonic.
I can't get any of the roots/roms for the Sonic to work.
Has anyone had any success getting the "Fusion" rooted/rom'd?
Thanks
Anyone? I'd really like some input
search U8650
bulltproof said:
Anyone? I'd really like some input
Click to expand...
Click to collapse
here is the thread
http://forum.xda-developers.com/showthread.php?t=1304678
U8652 Root
This will get you a Partial root.. Enough to Remove a Majority of the Pre-Loaded apps.. Thanks to a Chinese site for the info..
Only a few items that are pre-loaded that I was unable to remove via Titanium backup/other s/w methods:
Docs to go 3.003
Layar 5.0.2
Twitter 2.0.2
Uno 3.1.3
YP 3.0.3
All the above have : "Failed to locate the apk file." error in TB..
I will be Including the original link in the post.. I have cleaned up the English Translation to match more what you see on the phone as well..
(1) Activate "USB debugging": Settings - Applications - Development - USB debugging;
(2) ADB driver installed: When I plug this phone in to my computer, It has drivers listed in a virtual cd-rom drive.
(3) Dial, *#*#2846579#*#*
(4) Go to: Project Menu - background Setting - Log Switch - LOG on;
(5) Download DooMLoRD_v3_ROOT-zergRush-busybox-su, extract.
(6) Connect the phone to computer, make sure ADB is active and driver installed.
(7) Execute runme.bat, follow the prompts, Phone will auto restart.
I did have to run it a 2nd time to get a successful Root, but it worked well (Except the above isues) I also had a wireless issue after successfully completing the above ..
Couldn't connect to any WiFi networks.. Performed a Factory reset, and all uninstalled apps remained removed.
Original Links:
Am unable to post outside links as I am a new member..
bbs.hiapk com/thread-3098038-1-1.html
Hope this helps..
Worked for me!
Note: don't exit the menu after setting the log, just flick over to your pc and run runme.bat
Infopumper said:
This will get you a Partial root.. Enough to Remove a Majority of the Pre-Loaded apps.. Thanks to a Chinese site for the info..
Only a few items that are pre-loaded that I was unable to remove via Titanium backup/other s/w methods:
Docs to go 3.003
Layar 5.0.2
Twitter 2.0.2
Uno 3.1.3
YP 3.0.3
All the above have : "Failed to locate the apk file." error in TB..
I will be Including the original link in the post.. I have cleaned up the English Translation to match more what you see on the phone as well..
(1) Activate "USB debugging": Settings - Applications - Development - USB debugging;
(2) ADB driver installed: When I plug this phone in to my computer, It has drivers listed in a virtual cd-rom drive.
(3) Dial, *#*#2846579#*#*
(4) Go to: Project Menu - background Setting - Log Switch - LOG on;
(5) Download DooMLoRD_v3_ROOT-zergRush-busybox-su, extract.
(6) Connect the phone to computer, make sure ADB is active and driver installed.
(7) Execute runme.bat, follow the prompts, Phone will auto restart.
I did have to run it a 2nd time to get a successful Root, but it worked well (Except the above isues) I also had a wireless issue after successfully completing the above ..
Couldn't connect to any WiFi networks.. Performed a Factory reset, and all uninstalled apps remained removed.
Original Links:
Am unable to post outside links as I am a new member..
bbs.hiapk com/thread-3098038-1-1.html
Hope this helps..
Click to expand...
Click to collapse
I have u8652, superoneclick rooted, have superuser, romtoolbox and cache cleaner. I got the same "failed to locate apk file" message in TiBu when trying to uninstall layar, twitter etc. swapped it for root installer and it is saying "unable to uninstall app due to unknnown error" Is the above 7 steps the fix for the error messages?? im a complete noob to this. didnt even know what root was till a day or so ago...
also cant figure out how to wipe dalvic cache. tried the vol down power button boot but it goes straight to a "firmware update, unpacking, update failed" screen and freezes.. i know im missing somethething...
Unable to delete stock apps
Root Browser Lite will delete all those apps. I deleted a little too much with RBL and now I can't get my phone to work at all! Trying OEM Rom now.
Infopumper said:
This will get you a Partial root.. Enough to Remove a Majority of the Pre-Loaded apps.. Thanks to a Chinese site for the info..
Only a few items that are pre-loaded that I was unable to remove via Titanium backup/other s/w methods:
Docs to go 3.003
Layar 5.0.2
Twitter 2.0.2
Uno 3.1.3
YP 3.0.3
All the above have : "Failed to locate the apk file." error in TB..
I will be Including the original link in the post.. I have cleaned up the English Translation to match more what you see on the phone as well..
(1) Activate "USB debugging": Settings - Applications - Development - USB debugging;
(2) ADB driver installed: When I plug this phone in to my computer, It has drivers listed in a virtual cd-rom drive.
(3) Dial, *#*#2846579#*#*
(4) Go to: Project Menu - background Setting - Log Switch - LOG on;
(5) Download DooMLoRD_v3_ROOT-zergRush-busybox-su, extract.
(6) Connect the phone to computer, make sure ADB is active and driver installed.
(7) Execute runme.bat, follow the prompts, Phone will auto restart.
I did have to run it a 2nd time to get a successful Root, but it worked well (Except the above isues) I also had a wireless issue after successfully completing the above ..
Couldn't connect to any WiFi networks.. Performed a Factory reset, and all uninstalled apps remained removed.
Original Links:
Am unable to post outside links as I am a new member..
bbs.hiapk com/thread-3098038-1-1.html
Hope this helps..
Click to expand...
Click to collapse

[FIX] Huawei Gr8 Activation Code

im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
How to get avtivation code 4 huawei media pad gr8
Ameer latif said:
How to get avtivation code 4 huawei media pad gr8
Click to expand...
Click to collapse
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
The following errors occurred with your submission:
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Click to expand...
Click to collapse
Please google: Gr8 powered by Malay Mail ‎"Lim KY"‎ "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
methods can check out my blog:
HUAWEI S7-701U Gr8 ACTIVATION CODE BYPASS OR FIRMWARE 100%
METHOD 1: To perform hard reset for your Huawei S7-701u you may need to save all of your apps and files to your memory card and take it out...
dreamyskyblue.blogspot.com
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
B
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
Bt how I install app remover were as the phone is unaccesable,
billson.chew.my said:
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
Please google: Gr8 powered by Malay Mail ‎"Lim KY"‎ "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
Click to expand...
Click to collapse
How can I by pass, i have the code the problem is the WiFi, Wereas it is connected,

LeEco X4-40,X4-43Pro,X4-50Pro,X4-55 Custom Rom/ Rooted/US ROM/Indian ROM

Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
EUI Version
CHINA with Play Store and Play Services - EUI 6.5
US (Android Aosp) - EUI 5.8.057S
Awesome! performing the upgrade to 6.5 today!
OK, I've got it installed EUI 6.5 rooted, but I can't seem to get Gapps installed for the life of me. using the script calls ADB, but I can't figure out how to enable debugging in my TV to allow that.. The new UI is just too different to locate what I need to do.
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
[Recovery] LeTV Super4 (4th generation) :: All Mstar 6a938 based models supported
I want to leeco tv android oreo custom rom
I want to any custom oreo rom for leeco tv it is possible or not.
telegram group for LeEco
Souviktechguy said:
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
routerhacker said:
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
I have the LeEco 43 in bedroom....so frustrated, it is connected to the internet. I have cut the cable and using apps. Every time I turn the tv off...and then turn on later it will not upload the apps....I unplug the tv for a minute...then turn on and the apps load. I am not that tech savvy and would appreciate any help you might offer
Stuck
Darksurf said:
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
Click to expand...
Click to collapse
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
the Doctor said:
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
How do i post links for other firmware.. Xda is not allowing me to post firmware link as well!
Toni247C said:
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
Click to expand...
Click to collapse
Clear showtime app and force stop... It will resolve your problem
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Search TECHNITURE channel on youtube for more help..
You don't have to unplug the tv, hold the power button down for like 4 seconds to fully power the tv down, that works for me.
我是香港用戶。我成功刷了美國5.8 Rom,但無法搜索香港電視信號。如何將ATAC轉換為DTMB?
Hi my name is lawal am using leeco tv can some help me with new update please
Please some one should help me with new update for leeco tv please thank you all

[GUIDE] Switch software region to allow bootloader unlocking

In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants. However, the Chinese variants should be immediately unlockable.
-----
UPDATE:
It seems like OPPO caught onto this program. That MAC address is no longer accepted. However, there is a workaround (thanks to @Sonic Steven).
If you set the custom MAC on any adapters, remove it.
If you have the Secrecy program running, close it.
Disable any Ethernet/wired/virtual adapters, leaving only WiFi enabled. If you don't have a WiFi adapter, you may be able to leave Ethernet enabled, but it isn't guaranteed to work.
In Device Manager, click the root of the device tree (it should be your computer's name).
Open the "Action" menu and click "Add legacy hardware".
Click "Next" and select "Install the hardware that I manually select from a list (Advanced)".
Click "Next" again and select "Network adapters" in the list.
Click "Next" again. Once it loads, select "Microsoft" in the "Manufacturer" list.
In the "Model" list, select "Microsoft KM-TEST Loopback Adapter" (the name may be slightly different on other systems; select the one that has "Loopback Adapter" in the name).
Click "Next" twice to begin the installation.
Once the installation is complete, you should be able to reopen the Secrecy program and decrypt.
NOTE: The Secrecy program requires a working internet connection. It connects to OPPO's servers and performs some sort of authentication.
Zacharee1 said:
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
Click to expand...
Click to collapse
Thanks a lot (understatement) I will try follow your advice..
Does Unlocking the bootloader of Realme X3 SuperZoom, bricks the fingerprint sensor(Side-Mounted)???
Didn't passed step no. 13
I already tried but didn't passed step no. 13
---------- Post added at 01:01 AM ---------- Previous post was at 12:58 AM ----------
Zacharee1 said:
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants. However, the Chinese variants should be immediately unlockable.
Click to expand...
Click to collapse
I already tried but didn't passed step no. 13
my device doesnt come up i have mtp on and its not working, if i click unlock my device pops up but nothing is in right lane. any ideas australian oppo find x2 pro
---------- Post added at 12:46 PM ---------- Previous post was at 12:28 PM ----------
my device doesnt come up i have mtp on and its not working, if i click unlock my device pops up but nothing is in right lane. any ideas australian oppo find x2 pro
same Find X2 Pro sec5 dont show ok on the right side
hello
with oppo a9 2020;
does not work, I start the procedure with Sec5.exe it recognizes the device but does not give the ok; the same thing happens when you start secrecy.exe!
How can I solve?
@Zacharee1
I think this thread should be moved to https://forum.xda-developers.com/f/android-general.1424/, since it is not only for Realme X3 SuperZoom.
This solution is also applicable to RealmeC11(RMX2185).
credit to:
@Zacharee1
@HemanthJabalpuri
yeah i dont think this works anymore..
Sage said:
yeah i dont think this works anymore..
Click to expand...
Click to collapse
This works flawlessly in Realme C11.
HemanthJabalpuri said:
This works flawlessly in Realme C11.
Click to expand...
Click to collapse
recently? i am hearing in other threads that it was a recent change that made it stop working? only a few days ago.
Sage said:
recently? i am hearing in other threads that it was a recent change that made it stop working? only a few days ago.
Click to expand...
Click to collapse
Yes, see above post. https://forum.xda-developers.com/t/...ow-bootloader-unlocking.4136341/post-84091819
Got it working. Have NO MAC address listed in the Loopback and have at least 1 other network device active with internet access!
i thought you were supposed to have no internet adapter.
Also working on Realme 7 Pro, quick question, I'm already rooted with custom recovery, am I allowed to change the region without removing root and custom recovery?
Hello @Zacharee1
THANK YOU VERY MUCH!!
I was struggling to unlock the bootloader on a realme 5 with Android 10 and you SAVED MY ASS!!
Guide is working!!
Does not work on realme 7 RMX2155 : ( . In depth Test app Failed to submit application is displayed
works on a realme 7 pro, thanks.
dynux90 said:
Hello @Zacharee1
THANK YOU VERY MUCH!!
I was struggling to unlock the bootloader on a realme 5 with Android 10 and you SAVED MY ASS!!
Guide is working!!
Click to expand...
Click to collapse
how did you get it to work,,cause when i click on start unlocking my laptop screen just flashes,,but nothing happens on the sides of the secrecy autounlocker ,,a few trials here and there i was able to acquire a token from the software but when i input in my AuthTokenDecrypt it says signature doesn't match
Hye
Is This Still Working For realme 3 pro?

Region unlock procedure oppo find x 2 neo Dual Sim

This guide is a copy paste from this thread:
[GUIDE] Switch software region to Upgrade to ColorOS 11 and enable Dual Sim.
I want to write this here so it's all in one place and not scattered around different threads. Apologies for the bad formatting in some parts as this is on of my first contribution. Most of this is copied from this thread: I am adding onto this...
forum.xda-developers.com
For my oppo find x 2 neo it worked.
I remind you that it precedes it and has your danger
I am not responsible for any damage or blockages
DISCLAIMER: Use this at your own discretion. So far, when it works, it doesn't wipe any personal data
and nearly no issues are caused. Still, I am not responsible for bricked devices, broken warranties or lost data.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. If it says "device not found" or something similar, make sure MTP Mode is activated. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose this one: "Singapore Ex". Note: This Version has Theme Store, but no Ringtone Maker. Feel free to try other versions. EDIT: DO NOT CHANGE TO A REGION WITH CARRIER, ESPECIALLY THAILAND AS YOU WON'T BE ABLE TO CHANGE BACK! AT LEAST WHILE ON ANDROID 10. STICK WITH THOSE THAT END IN EX. Once you have done this, it appears that you can always bring up the region menu when dialing the numbers..
Your phone should now reboot. Once it's rebooted, your region will have changed.
Every time you changed region and want to change it again you need to use the software. You can get a code that you can use every time to change the region instead of using this software every time. (Update- one person report that this code(token) wont work for every time as his STAMP code changed.)
For this you need to: Open the dialer app , dial *#9434# ,press authtokendecrypt. You will see a IMEI and STAMP. Open the Sec5.exe and write the IMEI and STAMP shown on your phone in the blank space of the IMEI and STAMP in the software and press Generate a token, you will see a string of numbers and letters, write it on the token blank text box and click authtokendecrypt. Now you will see every text written in green. Now you can follow the steps in the guide but skip the steps that have to do with sec5. The Token that the software gave you is the same code that you need to enter in the *#9434# every time you want to change region so you do not need to use the software ever again.
UPDATE: Currently, it doesn't seem to work anymore for some people. Try installing Loopback network driver ( How to install Loopback) and uninstalling or disabling all other network drivers. If you are afraid of doing this with your own device you can use a Virtual Machine, too. I tried it this way.. Rest of the process is the same, just change the network address in Device Manager the same way as before.
Now that you are on the Pakistan Version, you can also run the device in dual sim mode, which was disabled in EU Mode. Some users have ordered Dual-Sim-trays on AliExpress and are now able to use it in this way. Also this might open up the path to unlock the bootloader, since that is limited to chinese devices only. I have not tried this out yet, though.
In theory, changing your region like this should work on any OPPO device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants.
this guide no longer works with the new updates for both x2 pro and neo so let's avoid posting things that are not valid there is already a tutorial
*#3954391# and *#391#not working in color os 11 solution plz

Categories

Resources