The amlogic 8726-mx device has a black screen - Android Stick & Console AMLogic based Computers

The amlogic 8726-mx device has a black screen because of the wrong firmware. The computer does not receive the worldcup even when the device is working properly (the computer still accepts other amlogic devices). Please help. Thank you in advance.
Photo of device
20210226 135514
Ảnh 20210226 135514 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com
20210226 135540
Ảnh 20210226 135540 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com

Help me, plz

12march said:
The amlogic 8726-mx device has a black screen because of the wrong firmware. The computer does not receive the worldcup even when the device is working properly (the computer still accepts other amlogic devices). Please help. Thank you in advance.
Photo of device
20210226 135514
Ảnh 20210226 135514 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com
20210226 135540
Ảnh 20210226 135540 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com
Click to expand...
Click to collapse
Mask Rom mode will probably be needed

aidanmacgregor said:
Mask Rom mode will probably be needed
Click to expand...
Click to collapse
Please give me detailed instructions

12march said:
Please give me detailed instructions
Click to expand...
Click to collapse
First step would be to figure out what NAND chip is in your device, then look here for the same or similar (same manufacturer often use same pins) to figure out the pins to short
NAND Chip Mask ROM Mode Short Location - FreakTab
Hi Everyone We have created this thread to collect all the NAND pin Short to Mask ROM Mode locations for all our members. Because firmware comes on android
forum.freaktab.com

Related

Chinese t329w PROTO need ROM

Hello.
Bought chinese version of PROTO with dual sim.
I've made a nandroid backup and flashed it with Desire X rom.
Phone is not working normally.
Want to revert to default rom, but during flashing SD card erased
Who have nandroid backup of Chinese version?
Or any other good working ROM, better if it will be European version.
I think the dual sim version is called "Desire V" so check out the forums for that phone.
Sent from my awesome fridge
MaartenXDA said:
I think the dual sim version is called "Desire V" so check out the forums for that phone.
Click to expand...
Click to collapse
No, Desire V is quite different. Other platform.
Desire X and Dual Sim version is the same PROTO platform.
Found on Chinese site
Firmware is only for Chinese version Desire X with dual SIM (HTC T329w "PROTO_DUG")!
PM66IMG_PROTO_DUG_ICS_40A_HTCCN_CHS_CU_1.00.1402.8_R_Radio_10.11.45D.02_2M_10.20.45.26U_release_293272_signed.zip
Rename this file to PM66IMG.zip and put it to the root of sdcard.
Reboot phone with pressed "Vol down" key, accept flashing.
Archive will not open with WinZip, it's ok. File is partially encrypted.
atomic-dz said:
Found on Chinese site
Firmware is only for Chinese version Desire X with dual SIM (HTC T329w "PROTO_DUG")!
h__ps://docs.google.com/open?id=0B0Pi6x_5X4lPaW5OSW1ieElKUmc
(Replace "__" with "tt" to get it)
Click to expand...
Click to collapse
Well, this is the package to be flashed through SD card.
TheChinese Version of the DX is not 100% Genuine
SaadCrackz said:
TheChinese Version of the DX is not 100% Genuine
Click to expand...
Click to collapse
Why do you think it's not genuine
That's an original product released by HTC for China market.
see HTC website - http://www.htc.com/cn/smartphones/htc-proto-t329w/
atomic-dz said:
Found on Chinese site
Firmware is only for Chinese version Desire X with dual SIM (HTC T329w "PROTO_DUG")!
h__ps://docs.google.com/open?id=0B0Pi6x_5X4lPaW5OSW1ieElKUmc
(Replace "__" with "tt" to get it)
Click to expand...
Click to collapse
The file above is corrupt, cannot be opened. Any other source?
Thanks!
As I learned the only existing ROM for t329W is 联通's original ROM. I guess if you need this you are in China, and if you are in China you can check taobao. Look for 刷机 and you will find it. The olny way so far if I am right.
If someone knows other existing ROMs for t329W please let me know asap.
Thanks!
Most i can do for you guys is create a recovery (CWM or TWRP) for it. Other than that, im sorry
Regards
Yasir
oratuld and
maarbalazs said:
The file above is corrupt, cannot be opened. Any other source?
Thanks!
Click to expand...
Click to collapse
It is not corrupted, I have flashed my phone with this firmware.
R: Chinese t329w PROTO need ROM
maarbalazs said:
The file above is corrupt, cannot be opened. Any other source?
Thanks!
Click to expand...
Click to collapse
Have you downloaded it correctly?
Sent from my HTC Desire X using xda premium
this file can not be open by any zip program, cause file encrypted.
but it can be flashed easily
Just rename it to PM66IMG.zip and put to the root of SD card and boot to the bootloader. It will flash automatically.
Sent from my HTC branded muffin...
htc t329w 2 sim taiwan
HTC T329W Recovery Root.
After you have unlocked bootloader, file down below and install the Recovery and Root.
mediafire.com/?uxv53hwcqo2f58c
- Extract have files SU3_2RC3.zip, recovery.img, T329wRoot.bat. Copy SU3_2RC3.zip file to the memory card.
- Remove the USB cable and boot into bootloader mode. Press fastboot and reconnect the USB cable.
- Run T329wRoot.bat file will automatically install the Recovery on your computer.
Recovery After installation is complete, start in recovery flash file SU3_2RC3.zip to root machine.
-----------
Vietnamese:
HTC T329W Recovery Root.
Sau khi đã unlock bootloader xong thì down file bên dưới về để cài Recovery và Root.
mediafire.com/?uxv53hwcqo2f58c
- Giải nén ra ta có các file SU3_2RC3.zip, recovery.img, T329wRoot.bat. Copy file SU3_2RC3.zip vào thẻ nhớ.
- Gỡ cáp USB và khởi động vào chế độ bootloader. Nhấn Fastboot và kết nối lại cáp USB.
- Chạy file T329wRoot.bat máy sẽ tự động cài Recovery vào máy.
Sau khi cài xong Recovery thì khởi động vào recovery flash file SU3_2RC3.zip để root máy.
Con muon biet lam sao ra toi buoc nay thi coi cac buoc truoc do ben duoi nha
Tải tất cả các tool cần thiết ở đây:
mediafire.com/?783kthx72x3uf5d
HTC Sync để cài Driver: dl4.htc.com/managed-assets/support/software/htc-sync/setup_3.2.10.exe
I. Bootloader Unlocking
1. Vào trang htcdev.com, tạo một tài khoản và nhấn vào biểu tượng Unlock bootloader và chọn Get Started. Sau khi đăng nhập, chọn “All Other Supported Models” từ danh sách và nhấn vào nút Begin Unlock Boatloader. Một cửa sổ hiện ra thông báo có thể bạn sẽ mất quyền bảo hành, nhấn Yes và tiếp tục làm theo hướng dẫn. Tịch chọn vào 2 ô trong mục Legal Terms rồi nhấn Proceed to Unlock Instructions.
2. Vào chế độ bootloader, giữ phím nguồn trong vài giây để khởi động lại máy. Sau đó giữ nút Volume Down (-) và nhấn nút giữ nút nguồn Power - không kết nối với cáp USB. Sử dụng nút up và down để chọn "Fastboot" và dùng nút Power để chọn. Bây giờ kết nối cáp USB và tiếp tục làm theo các hướng dẫn của HTC.
3. Giải nén file zip vừa down ở trên về, cài đặt chương trình HTC Sync để cài đặt drivers. Vào Start > Run > gõ CMD để mở cửa sổ dòng lệnh.
Sử dụng lệnh để điều hướng đến thư mục bạn vừa giải nén và chạy lệnh fastboot.
Ví dụ bạn giải nén vào ổ C thì trong cửa sổ dòng lệnh CMD gõ cd C:/t328w (với t328w là thư mục vừa giải nén vào) để chuyển đến nó.
Tiếp tục gõ lệnh: fastboot oem get_identifier_token
Bạn sẽ nhìn thấy 1 khối văn bản dài. Copy và paste đoạn text này vào khung bên dưới (trong cửa sổ dòng lệnh chọn: Chuột phải > Mark > đánh dấu block văn bản > nhấn Enter để copy).
Bạn sẽ thấy cửa sổ như sau, khi copy đoạn text thì bắt đầu từ dòng <<<< Identifier Token Start >>>> và kết thúc ở dòng <<<<< Identifier Token End >>>>>
(Chú ý: Chỉ copy vùng đánh dấu ở trên. Không copy tiền tố INFO hoặc(bootloader) )
Đây là bước 10 trong mục hướng dẫn của trang htcdev.com, bạn phải vào đấy mới thấy khung paste đoạn text.
Copy vào khung My Device Identifier Token: và nhấn Submit. Hệ thống sẽ gửi 1 file Unlock_Code.bin về hòm thư của bạn.
4. Lưu tập tin đính kèm Unlock_Code.bin mà HTC gửi về email của bạn rồi copy vào trong thư mục vừa giải nén và chạy lệnh tiếp theo. Bây giờ bạn đã unlock được bootloader và phone của bạn sẽ khởi động lại, một trình hướng dẫn của HTC sẽ xuất hiện khi bạn chọn ngôn ngữ English một lần nữa.
Tại dấu nhắc của dòng lệnh gõ: fastboot flash unlocktoken Unlock_code.bin
Trên điện thoại sẽ hiện ra 1 thông báo hỏi bạn có muốn Unlock bootloader không, chọn Yes, hệ thống sẽ khởi động lại.
Khởi động vào fastboot nếu thấy xuất hiện chữ ***Unlocked*** là máy đã được unlocked thành công.
--------------------
donggiagia
help! please~
Stereo8 said:
Just rename it to PM66IMG.zip and put to the root of SD card and boot to the bootloader. It will flash automatically.
Sent from my HTC branded muffin...
Click to expand...
Click to collapse
I download the file correctly, and I do according to your way ,but It return to the fastboot so I have no time to press the "v+"button to chose update,my phone's Baseband now is "unkown" what can I do,can anyone help me ?
Press power while in fastboot to get to the bootloader...
Flowed from my HTC branded muffin...
Stereo8 said:
Press power while in fastboot to get to the bootloader...
Flowed from my HTC branded muffin...
Click to expand...
Click to collapse
sadly, it don't work, it seems to do nothing after it run out all the progress bar, can you give me a "radio.zip" of dual sim version,this error has taken me the whole day to fix it~
hi_kvan said:
sadly, it don't work, it seems to do nothing after it run out all the progress bar, can you give me a "radio.zip" of dual sim version,this error has taken me the whole day to fix it~
Click to expand...
Click to collapse
it seem update ruu from SD card should relocked the phone
neXus PRIME said:
Most i can do for you guys is create a recovery (CWM or TWRP) for it. Other than that, im sorry
Regards
Yasir
Click to expand...
Click to collapse
May I ask you the original recovery for hTC T329W (desire x with dual gsm sim for china market)?
Thanks in advanced
:fingers-crossed:

question about rom

Does the developer support rom for samsung a50s
hope so...
Tôi hỏi bọn bên A50 nó nói là do samsung không chịu đưa ra nguồn kernel nên không làm gì được
Looking forward to dump this phone ?
Is there any way to flash gsi on a50s
TarikAhasan said:
Is there any way to flash gsi on a50s
Click to expand...
Click to collapse
We don't have twrp

Brick LG V50S ThinQ (V510N)

When I erase entire Flash on QFIL ( Partion manager ) , PC connection only receives port " qualcomm hs-usb qdloader 9008 ", How to unbrick,Thank ( Sorry my english is not good )
PS : Done
After unbrick , imei phone =0 . Can you help me?
heaven3tt said:
After unbrick , imei phone =0 . Can you help me?
View attachment 5308041
Click to expand...
Click to collapse
need backup modemst1.bin, modemst2.bin.,fsg.bin, modem_a.bin,modem_b.bin..
sorry.. i have backup lg v50... if you want to try reload my backup..
first. backup your modem_a.bin,modem_b.bin.
if your reload succed for imei but no signal.. you can flash kdz file...hope you succed..
heaven3tt said:
After unbrick , imei phone =0 . Can you help me?
View attachment 5308041
Click to expand...
Click to collapse
Hello, how was you able to unbrick your phone? Did you use QFIL? I need to fix my LG v50
wibigdog said:
Hello, how was you able to unbrick your phone? Did you use QFIL? I need to fix my LG v50
Click to expand...
Click to collapse
Yes...with QFIL.....
agn8888 said:
Yes...with QFIL.....
Click to expand...
Click to collapse
Yes, I'm trying this... However, I don't have the required xml/partition files. My partitions are gone because I accidentally erased the flash.
wibigdog said:
Yes, I'm trying this... However, I don't have the required xml/partition files. My partitions are gone because I accidentally erased the flash.
Click to expand...
Click to collapse
I tried to follow this tutorial for LG G7 https://forum.xda-developers.com/t/how-to-recover-from-any-hardbrick-or-red-case-in-9008-mode-without-any-boxes.4052841/
Sadly, the rawprogam generator for V30 that they used have stopped working for newer models.
You need firehose to reload the modemst1 and modemst2.... with qfil...
firehose lg v50...
Hi, do you happen to check or verify what's hardware info on the soundcard of your V50S?
I've been looking to check if the Quad-DAC is from ESS or from Qualcom's.
agn8888 said:
need backup modemst1.bin, modemst2.bin.,fsg.bin, modem_a.bin,modem_b.bin..
sorry.. i have backup lg v50... if you want to try reload my backup..
first. backup your modem_a.bin,modem_b.bin.
if your reload succed for imei but no signal.. you can flash kdz file...hope you succed..
Click to expand...
Click to collapse
Many thanks to you kind person!!! I faced "no signal issue" on v50s after crossflash. I Used QFIL and flashed your fgs,modemst1 an modemst2 partitions and it works fine with v50s. I'm happy!
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n20v android 10. Bao gồm tất cả các phân vùng và tệp .xml.
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n. Tuy nhiên có 2 lỗi là mất imei, có thể nhập *#546368#*510# để khắc phục. Lỗi hiển thị tên thiết bị và tên thiết bị Bluetooth của bạn.
dung lượng 6gb. Giải nén ~20gb
backup_lg-v50s.rar
drive.google.com
Zenozero said:
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n20v android 10. Bao gồm tất cả các phân vùng và tệp .xml.
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n. Tuy nhiên có 2 lỗi là mất imei, có thể nhập *#546368#*510# để khắc phục. Lỗi hiển thị tên thiết bị và tên thiết bị Bluetooth của bạn.
dung lượng 6gb. Giải nén ~20gb
backup_lg-v50s.rar
drive.google.com
Click to expand...
Click to collapse
sorry the post above has no effect at all.
backup xml file + partition needed to enter Download mode of lg v50s here https://drive.google.com/file/d/1SlPc4CpHUVM1FW-AsEUDaSOsrTNb2Va2/view?usp=sharing
0. Consult the recovery method of lg v50 or other machine and find the program file to install. QFIL and LGUP or LG Drive.
1. go to load xml.
2. select the extracted lg backup file and select it
all .xml files select open
3. choose cancel
4. choose download
5. wait for it to load
6. When done, press the volume button - at the same time with the power button for about 12 seconds
release, wait 10 20 seconds if no response press again. If it is up, the logo will appear and then turn off. Press and hold volume + button to enter downloade mode and then go to lgup up to rom.
7. In LGUP when pressing Start, there will be a notice board, please select Yes.
Zenozero said:
sorry the post above has no effect at all.
backup xml file + partition needed to enter Download mode of lg v50s here https://drive.google.com/file/d/1SlPc4CpHUVM1FW-AsEUDaSOsrTNb2Va2/view?usp=sharing
Click to expand...
Click to collapse
It seems the file has been deleted.
Could you please update the link ?

Firmware for Tanix TX3 Mini+ (S905W2)

Official firmware for this device. There are two firmware versions, one for the cheaper variant with only 2,4 Ghz WiFi and other for the dual-band (2,4 and 5 Ghz) variant.
Single band (2,4 Ghz WiFi) - TX3mini_S905W2_20211115.img
Dual band (2,4 and 5 Ghz WiFi) - TX3MINI_plus_dual_20211113.img
I tested the dual band version on my 4/64 GB device and it works. Installed with Amlogic USB Burning Tool.
Anyway, the firmware is still very buggy and root access doesn't work properly yet. Can't use OAndBackupX to restore my apps, nor AdAway to block ads... Consider this firmware only useful if you brick your device and need to flash it.
thanks.
What custom roms do you recomend for a tanix tx3 mini-L?
I don't have that model, but I would try Slimbox ATV.
TX3 Mini
CPU: Amlogic S905W GPU: Mali-450MP
slimboxtv.ru
The site is in russian, but you can use the translator of Chrome/Chromium.
I'm just curious about the box, as it looks quite intriguing specs-wise. Reached any verdict yet?
Hardware is good, but the firmware is still buggy.
Currently with tx3 plus, I can't boot it from sd card or use any way like debug with adb. Can someone help me? Thank you very much
Anyone else experiencing issues with hdr and 4k 60hz? Sometimes i have the option and sometimes i dont
I there a custom ROM already for the tx3 Mini+ ?
there are many revisions of the TX3 Mini (unique ones are rev 1.3, 1.6)
most of them have eMMC, while I have the weird 3D-NAND version
(that's rev 1.3 btw)
which revision is this firmware for?
LITUATUI said:
LITUATUI said:
Does you have a custom recovery for Tx3 mini+ i really need it.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
LITUATUI said:
Phần mềm chính thức cho thiết bị này. Có hai phiên bản phần sụn, một cho biến thể rẻ hơn chỉ có WiFi 2,4 Ghz và một cho biến thể băng tần kép (2,4 và 5 Ghz).
Băng tần đơn (WiFi 2,4 Ghz) - TX3mini_S905W2_20211115.img
Băng tần kép (WiFi 2,4 và 5 Ghz) - TX3MINI_plus_dual_20211113.img
Tôi đã thử nghiệm phiên bản băng tần kép trên thiết bị 4/64 GB của mình và nó hoạt động. Được cài đặt với Amlogic USB Burning Tool.
Dù sao, phần sụn vẫn còn rất nhiều lỗi và quyền truy cập root vẫn chưa hoạt động bình thường. Không thể sử dụng OAndBackupX để khôi phục ứng dụng của tôi, cũng như AdAway để chặn quảng cáo ... Hãy xem xét chương trình cơ sở này chỉ hữu ích nếu bạn đặt thiết bị của mình và cần flash thiết bị.
Click to expand...
Click to collapse
SlimboxTV firmware already available for Tanix S905W2 devices here. Full root with magisk.
ola nao falo inglessou do brasil alguem ai no foro tem o backup original
da box tx9 normal nao e a mini
LITUATUI said:
SlimboxTV firmware already available for Tanix S905W2 devices here. Full root with magisk.
Click to expand...
Click to collapse
Is there a firmware for TX3 MINI+ as well? Perhaps it works with the tanix w2 file?
hojnikb said:
Is there a firmware for TX3 MINI+ as well? Perhaps it works with the tanix w2 file?
Click to expand...
Click to collapse
It does, I'm using it for some weeks now.
can we expect a11 a12 on our tx3 mini or not
mình cần rom cho phiên bản tx3 mini 2g chạy android 11. có dùng được bản nào ít lỗi không
Mod translation via GT: I need rom for tx3 mini 2g version running android 11. can I use any version with few errors?
LITUATUI said:
Nó có, tôi đang sử dụng nó trong vài tuần nay.
Click to expand...
Click to collapse
can i flash it to tx3 mini 2.4g running android 11
LITUATUI said:
Não tenho esse modelo, mas tentaria o Slimbox ATV.
TX3 Mini
CPU: Amlogic S905W GPU: Mali-450MP
slimboxtv.ru
O site está em russo, mas você pode usar o tradutor do Chrome/Chromium.
Click to expand...
Click to collapse
Hi my friend how are you ?
Could you or someone tell me where the short of this board is so I can restore it? It connects normally, but it doesn't recognize it on the computer at all. can you help me ? I already installed the usb burning tools, the drivers and nothing appears, just the sign of being connected but nothing appears in the program
niconstill said:
Hi my friend how are you ?
Could you or someone tell me where the short of this board is so I can restore it? It connects normally, but it doesn't recognize it on the computer at all. can you help me ? I already installed the usb burning tools, the drivers and nothing appears, just the sign of being connected but nothing appears in the program
Click to expand...
Click to collapse
Hi.
Are you using the correct cables? A USB A - A like this one.
niconstill said:
...I already installed the usb burning tools, the drivers and nothing appears, just the sign of being connected but nothing appears in the program
Click to expand...
Click to collapse
Try this, install Terminal Emulator app and execute command reboot update and quickly connect USB cable, while burning tool is running...

Question LineageOS GSI Rom On 1+10T

has anyone tried flashing lineageOS on oneplus 10T?
How to Install LineageOS ROM on OnePlus 10T
In this comprehensive tutorial, we will show you the detailed steps to install the LineageOS ROM onto your OnePlus 10T.
www.droidwin.com
as far as i know msm tool can't be easily used on oneplus 10T anymore so this doesn't seem safe for your phone
tungninh said:
has anyone tried flashing lineageOS on oneplus 10T?
How to Install LineageOS ROM on OnePlus 10T
In this comprehensive tutorial, we will show you the detailed steps to install the LineageOS ROM onto your OnePlus 10T.
www.droidwin.com
as far as i know msm tool can't be easily used on oneplus 10T anymore so this doesn't seem safe for your phone
Click to expand...
Click to collapse
I would not recommend this flashing for anyone, I bricked my cph2417 model on 12 by flashing to the Indian 13 version tried to go back because it kept rebooting and now it will not come on but maybe that's just me having bad luck.
Although I would love to try this on my phone lol,the article uses a 10 pro, not 10t... Seems a bit too risky for my right now.
JPower123 said:
Although I would love to try this on my phone lol,the article uses a 10 pro, not 10t... Seems a bit too risky for my right now.
Click to expand...
Click to collapse
dường như có một tùy chọn flash thủ công để bỏ gạch, sử dụng flastboot để flash từng tệp .img cho 10T. Tôi đã đọc nó nhưng quá mạo hiểm để thử 10T của mình.
Đây là tệp GSI nên bạn có thể sử dụng trên 10T, 10pro. Thành thật mà nói, tôi đã không có can đảm để thử (mặc dù tôi đã tìm thấy một vài người bán ID để đăng nhập MSM để tiết kiệm gạch)
Mod translation:
there seems to be a manual flash option to un-tile, use flastboot to flash each .img file for 10T. I read it but was too risky to try my 10T.
This is a GSI file so you can use it on 10T, 10pro. Honestly, I didn't have the guts to try (although I did find a few people selling IDs for MSM logins to save bricks)
oneplushypergaming said:
I would not recommend this flashing for anyone, I bricked my cph2417 model on 12 by flashing to the Indian 13 version tried to go back because it kept rebooting and now it will not come on but maybe that's just me having bad luck.
Click to expand...
Click to collapse
Tôi đã đọc một hướng dẫn về tiết kiệm gạch bằng cách nhấp nháy từng tệp .img thông qua fastboot nhưng tôi không có thiết bị để thử. Bạn có thể thử tìm hoặc có một số công cụ MSM ID người bán để bỏ qua.
Khi thay đổi regeion, bạn phải sử dụng tệp hạ cấp với ***g một regeion mà thiết bị của bạn đang sử dụng, sau đó flash android 13 IN / EU / NA....
Mod translation:
I've read a tutorial on saving tiles by flashing each .img file through fastboot but I don't have the device to try it on. You can try to find or have some merchant ID MSM tool to bypass.
When changing regeion you must use downgrade file with same regeion your device is using then flash android 13 IN/EU/NA....
tungninh said:
Tôi đã đọc một hướng dẫn về tiết kiệm gạch bằng cách nhấp nháy từng tệp .img thông qua fastboot nhưng tôi không có thiết bị để thử. Bạn có thể thử tìm hoặc có một số công cụ MSM ID người bán để bỏ qua.
Khi thay đổi regeion, bạn phải sử dụng tệp hạ cấp với ***g một regeion mà thiết bị của bạn đang sử dụng, sau đó flash android 13 IN / EU / NA....
Click to expand...
Click to collapse
Interesting, I may try this at some point then...
love lineageos. gonna wait for an official version though, not worth right now, i think
oneplushypergaming said:
I would not recommend this flashing for anyone, I bricked my cph2417 model on 12 by flashing to the Indian 13 version tried to go back because it kept rebooting and now it will not come on but maybe that's just me having bad luck.
Click to expand...
Click to collapse
Did you try reflashing your phone through fastboot because that's the only way to do it right now
AkayamiShurui said:
Did you try reflashing your phone through fastboot because that's the only way to do it right now
Click to expand...
Click to collapse
Have You or anyone with his cph2417 on the hardbriked state manage to getit out of that state. In my case I cannot manage to putit on fastboot mode Only on EDL
hm
AkayamiShurui said:
Did you try reflashing your phone through fastboot because that's the only way to do it right now
Click to expand...
Click to collapse
cannot acess flash boot due to hard brick phone wont respond
hackinc2000 said:
Have You or anyone with his cph2417 on the hardbriked state manage to getit out of that state. In my case I cannot manage to putit on fastboot mode Only on EDL
Click to expand...
Click to collapse
yeah im trading mines in with amazon
hackinc2000 said:
Have You or anyone with his cph2417 on the hardbriked state manage to getit out of that state. In my case I cannot manage to putit on fastboot mode Only on EDL
Click to expand...
Click to collapse
you search on tele for ID sellers to use the MSM tool. About $20
tungninh said:
you search on tele for ID sellers to use the MSM tool. About $20
Click to expand...
Click to collapse
Well if OnePlus Tech support does not respond for next week. Hopefully! I will go in that direction. Thanks.
hackinc2000 said:
Well if OnePlus Tech support does not respond for next week. Hopefully! I will go in that direction. Thanks.
Click to expand...
Click to collapse
3 weeks already with support waiting for a shipping label to get into my email. by the way!!!
hackinc2000 said:
3 weeks already with support waiting for a shipping label to get into my email. by the way!!!
Click to expand...
Click to collapse
tôi đã liện hệ với người này, máy tôi không có vấn đề gì, chỉ là tôi chuẩn bị trước. Tôi flash GSI ROM rất nhiều.
Mod translation: I contacted this person, my computer has no problem, I just prepared in advance. I flash GSI ROMs a lot.
tungninh said:
Mod translation: I contacted this person, my computer has no problem, I just prepared in advance. I flash GSI ROMs a lot.
Click to expand...
Click to collapse
Greetings. As a "last time" courtesy, I have translated your recent posts. I will politely ask you to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Your cooperation is expected and appreciated. Thank you, and have a pleasant day.
-Regards: Badger50

Categories

Resources