**** Disclaimer: I'm not responsible if you destroy your device. Learn at your own risk!!! ****
Alright, So I am a bit Moderately skilled to Custom Development. I do not know a lot of in-depth either.
However, I do know enough to help other new beginners out.
As I continue to learn more info and details, I will update this post frequently.
Completed guide, I'm saving and typing as not to lose progress. Last Updated- 01/03/2021
Please do note, CROSS-VERIFY if the info here is correct before following it.
What is a Custom ROM?
Simply put, it is a new Operating System [OS].
People find their stock (the one you got with your phone) to be boring, or they dislike it or want more customization and optimization, lesser bloatware (useless unwanted system apps).
Thus some Developers made their own ROM (aka OS). Then others made it compatible with our phone. Sometimes this works perfectly, most of the time it doesn't. Thus Asking people how the ROM is, is always good to ask.
STABLE means almost no errors, UNSTABLE means a few/lots of errors.
OFFICIAL means the Developer in charge will keep updating it and has been granted the task officially. EOL means End Of Life, aka Developer, won't work on it anymore.
FOD means finger on display icon, FP means fingerprint sensor, SOT means screen on time or how long your battery will last.BB means Battery backup, or how long the battery will last.
Click to expand...
Click to collapse
How To Get a Custom ROM?
So, to flash (insert) a new Custom ROM, we first need to unlock the Bootloader. The Bootloader is what allows us to wipe (remove/erase) our data, and current OS and flash a different one.
Then we flash a Recovery. (A software that makes flashing and wiping and other stuff easy)
Then flash the ROM, Then (if needed) vendor+firmware, gapps, magisk.
So in k20 pro/Mi 9t pro, there are 5 vendors. Indians use Indian Vendor, Chinese users use Chinese Vendor, similarly for EEA, Russian, and Global.
In this Vendor zip file, nowadays, the firmware is included in them, so it isn't required to flash it separately.
If you are coming from miui 11 and want to flash custom ROM you don't need to flash the vendor.
If you are coming from miui 10 to custom ROM Android 10, you need to flash the miui 11 vendor along with the ROM.
Click to expand...
Click to collapse
How To Unlock Bootloader?
So, you should first update your software to the latest miui OS [current: MIUI 11].
Go to Settings > About Phone > tap on MIUI Version 7 times -> you unlock developer settings
Go to Settings > Additional Settings > Developer Options > enable (switch on) USB Debugging > OEM Unlocking > click on MI Unlock status > link account and device.
To link the account, you must first have a Xiaomi MI account. You can make this in settings, or head to https://account.xiaomi.com
Wait 7-15 days
Once 7-15 days have passed,
USING WINDOWS PC
BACKUP ALL FILES, CONTACTS, WHATSAPP, ANY APP settings (if any), AND SYNC/LINK accounts to cloud => YOU WILL LOSE EVERYTHING NOW
Now download the Mi Unlock tool onto your PC https://xiaomitools.com/mi-unlock-tool-en/
IN A SEPERATE FOLDER
Then download Platform Tools from attachments below.
Then download TWRP (team win recovery project) from https://dl.twrp.me/raphael/
Then download Orange Fox Recovery (OFRP) from https://files.orangefox.tech/OrangeFox-Stable/raphael/ and download the latest file. [Currently: OrangeFox-R-10.1_3-Stable-raphael.zip]
Then download Disable force encrypt zip file from attachments below
Then download adb drivers from https://www.xda-developers.com/what-is-adb/ version 1.4.3 onto your PC and run the application. (Follow from How do I install ADB?) (Or you can skip that and just get the file from attachments below and extract it to C drive as a separate folder directly)
Then download the ROM (links are given below)
Then download gapps (optional). from https://opengapps.org/ and select ARMx64 and PICO then the download button.
Then download Magisk (optional). from https://github.com/topjohnwu/Magisk/releases download the Latest Magisk-vXX.xx.zip file there.[Currently: Magisk-v20.4.zip]
Download the latest vendor file from the below links. (make sure it's the proper file for your device's variant.)
Vendor and firmware are both combined and included in the same zip file.
Global, EEA (Europe), China, Russia Q Vendor: https://xiaomifirmwareupdater.com/archive/vendor/raphael/
Indian Q Vendor: https://xiaomifirmwareupdater.com/archive/vendor/raphaelin/
Check my third comment to learn how to recognize which device variant is yours, and what vendor to download and flash.
NOW! GET READY!
Now, connect your device.
Use your cable included in the box (the charging wire) and connect it to your phone and PC.
Go to 'adb' folder in your C-drive, (on that address bar thing where it shows) This PC >OS(C> adb click on it and type cmd . This will open a Command prompt to that folder.
Type adb devices and on your phone tap on the authorize button that pops up when unlocked. Now type adb devices again.
you will get
Code:
List of devices attached
365278234e device
Now, Switch off your phone.
Open the MI Unlock Tool on your PC, run the file that is an application. Read through everything, click on unlock, confirm.
Wait till the phone fully reboots itself. DON'T TOUCH IT NOW!
Congrats, the phone is now unlocked, and you have stock MIUI 11.
Now skip everything in the setup (we wanna add a custom ROM now remember, why stop here?)
again do the adb devices. You should get the same results.
Now, on your PC
Extract the Platform Tools zip file so you get its folder.
Move the TWRP.img file into the folder.
Open that folder. on that address bar, type cmd to get a new command prompt window.
There type dir *img to confirm the file is found properly.
Now switch off your phone again.
press and hold the power button + volume down button.
you will soon enter fastboot mode.
Now, on the new command prompt where you typed dir *img
type fastboot devices and you will get an output like
Code:
342524356 fastboot
Then type fastboot flash recovery twrp(press the TAB key to autofill)
Now it's done! you have TWRP, but it isn't permanent.
Now, TWRP usage.
Now press and hold power key + volume up to enter TWRP.
Once in TWRP, unlock it.
Go to MOUNT and check if MTP is enabled..... click on "enable MTP" button.
Now copy the ofox.zip (orange fox recovery zip file) to your phone from your PC via your PC.
Now go to INSTALL tap the ofox.zip file, then flash it!
YAY now, orangefox is your Permanent Recovery.
Now go to MENU > Manage Partitions > select only data > format data
Now go to MENU > Reboot > Recovery
Now, to Flash your first Custom Rom.
Now from your PC copy the ROM zip file, Disable decrypt zip file, gapps ( if specified, optional), magisk ( if you want to root, optional)
Now go to MENU > Reboot > Recovery
Now go to FILES > tap on the ROM zip > add to queue > tap disable decrypt zip file > add to queue > (add gapps , magisk if needed) > flash
Now wait for a while (approx 10mins) till ROM boots up and complete the setup process.
Congrats you have your new ROM.
Now just let google download all your apps
Before you change settings like dark mode or use custom launchers etc...
Reboot once for the heck of it. Then Customize the way you like.
**** Backup Your Persist and save it on your PC always. ****
You can backup persist by having root then downloading a terminal app from Playstore. then typing these two commands
Code:
su
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img
Click to expand...
Click to collapse
How To Change My ROM? I wanna Try them all!
Now is the easy part, since all the setup is done!
First remove all passwords, fingerprints, and so forth.
For AOSP ROMs: (MIUI below)
AOSP ROMs will not break your L1
First Download the AOSP ROM you want, given below are some examples. (MIUI below)
Each of these might have instructions, usually saying...
Go to your Recovery, (press and hold Power + Volume Up buttons).
Then go to WIPE > select Dalvik, Cache, System, Data > then wipe them all.
Then go to [Files in OFX] [Install in TWRP] and
Only If you are coming from miui and flashing AOSP, go to orangefox settings > manage partitions > data > format > type yes (you lose everything in internal storage) then
Select the Vendor (if it's needed) (not required if moving between any android 10 ROMs) (Just make sure it's the right Vendor for your device/region) (If the previous AOSP rom uses OSS vendor, then you need to wipe vendor as well and flash the stock before proceeding) and flash it.
Select the ROM (Then > add to queue, else if you only needed ROM, just flash. and set-up! yay!)
DFE (not required if you want to be encrypted, which is not recommended.) (A must if you formatted data via orangefox settings and did that typing 'yes' thing)
Gapps (if it isn't already included in the ROM, ask first).
and Magisk (optional if you want root).
For MIUI ROMs: (AOSP above)
First Download the MIUI based ROM you want ( stock, EU, MortalOS, etc), given below are some examples.
Each of these might have instructions, usually saying...
Go to your Recovery, (press and hold Power + Volume Up buttons).
Select the Vendor (if it's needed) (not required if it's currently the proper Vendor, cause EU ROMs to use a custom vendor that works on all devices) (Just make sure it's the right Vendor for your device/region) and flash it.
Then go to WIPE > select Dalvik, Cache, System, Data, Vendor > then wipe them all. (make sure you are on your device's vendor region before wiping it.)
Then go to [Files in OFX] [Install in TWRP] and
Only If you are coming from AOSP and flashing MIUI, go to orangefox settings > manage partitions > data > format > type yes (you lose everything in internal storage) then
Select the ROM (Then > add to queue, else if you only needed ROM, just flash. and set-up! yay!)
DFE (A must if you formatted data via orangefox settings and did that typing 'yes' thing)
Magisk (optional if you want root).
Some Android ROMs
With ROMs being built, changed, and modified on a daily/weekly basis. Some changing to Mi9 fod or LOS fod or using Stock or OSS vendors. Sometimes maintainers shifting or 2 devs building the same rom. The below list is not being maintained anymore. We currently have 50 ROMs. YAY Raphael!
Update: I'm removing most of the ROMs listed here and only adding my personal favorite ROMs
AOSP ROMs
DerpfestOS (two variants, I like em both) - by @Raaj52 -> https://forum.xda-developers.com/k20-pro/development/rom-derpfest-t4132757
SuperiorOS by @HSgod -> https://forum.xda-developers.com/k20-pro/development/rom-superioros-t4130867
MortalOS (miui12) by @Raaj52 -> https://forum.xda-developers.com/k20-pro/development/rom-havoc-os-3-3-t4063081
LineageOS, Pixel Experience, PE+, PE+ Fan Edition, ParanoidOS, MookeOS, TitaniumOS, MSM Xtended, OxygenOS, OmniOS, TreskMod, AOSIP, ColtOS, ArrowOS, BootleggersOS, ExtendedUI (exui), CRdroidOS, RevengeOS, IonOS, AICP, BlissOS, CorvusOS, DerpfestOS, HavocOS, NitrogenOS, HentaiOS, Corvus, TitianiumOS, CygnusOS, CesiumOS, Project 404, DescendantOS, SyberiaOS, EvolutionX, AOSPA, POSP, LegionOS, AncientOS, RebellionOS, SuperiorOS, ShapeshiftOS, WrathOS, ZenX, AIM OS, ConquerOS, PixelDustOS, CygnusOS, StagOS, Ressurection Remix OS, Quartz, PixysOS, PePlusUI, MalluOS, StatixOS, GrapheneOS, ShapeshiftOS, MortalOS, SuperiorOS, AwakenOS, DotOS, Lemon Branch, FluidOS, LiquidOS + more!
MIUI ROMs
EU ROMs, MortalOS, RevolutionOS, Miroom, MMX, Masik + 5 other ROMs
Kernels
Perf (miui kernel), F1xy, Immensity, Englezos, Marisa, R4v3n, Void, NotKernel, Smurf, Candy, Supermad, Antarctica, Evira
MY SUPPORT
I got help from multiple telegram guys for this.
Shoutout to @ishtiak02, @ComicoX, @logosA, Bruce Wayne, SSS, @Noobmaster69 @Lacentix @Raaj52 @nevoness @joshuah1971 and a lot of others teaching me about ROMs and answering my numerous questions.
I am using the Indian variant K20 pro (aka Raphaelin)
You can always ask in the Our Telegram Group, or me, or in the comments. (not allowed to link telegram group I think)
~FINISH
~Do Comment and Thank, it'll bump this guide to be noticed more, so others can find this guide and get help as well
Reverting Back to PIE, moving from Android 10+ to Android 9 -Just don't- (RIN users)
Right, so Anti-Rollback protection is not implemented for k20 pro or mi 9tp. YOU CAN REVERT IF YOU WANT TO.
This is confirmed by users who have reverted, and by Xiaomi.eu website. Which I trust regarding this.
We've done experiments regarding this and have concluded this applies to raphaelin users (Indian variant devices) only. Unsure why, and how it is not affecting the mi9tp variant. (no confirmation with RCN)
However,
When moving from an Android 10 vendor to an Android 9 vendor, your SENSORS will break!
You can fix this simply by flashing your persist img (Hope you took that backup).
You can also fix your sensors by flashing someone else's persist img. BUT YOU WILL LOSE L1 FOREVER.
You can get L1 back by replacing the motherboard which can be done via your warranty at a service center, or by playing a hefty sum of money. nearly half the cost of the phone. NO OTHER WAY. Also, they open your phone, so it isn't SPLASHPROOF as much anymore.
You can also fix sensors by simply updating back to android 10 via the OTA method, which is found in your settings remember. (Unsure if this will retain your L1 though)
BOTTOM LINE, IF YOU ARE ON ANDROID 10, don't go to ANDROID 9 back.
Stuck at Fastboot Fix
Best Recovery
So regarding Recoveries. Choose the one you like the most.
I prefer the latest OrangeFox recovery cause it looks better, has a better UI, better settings, more functionality, and so forth. https://files.orangefox.tech/OrangeFox-Stable/raphael/
You can also choose TWRP if you like. Completely your choice. You can get that from here https://forum.xda-developers.com/k20-pro/development/recovery-unofficial-twrp-xiaomi-redmi-t3944363 and choose the most recent one, and follow the instructions given there.
If you are just comfortable with TWRP. Always use Mauronofrio's, which is recognized as OFFICIAL.
To flash either recovery, just download the zip file, and simply flash it directly in your recovery like you do for a rom (no need to wipe anything) and it will auto-reboot into your desired recovery.
All credits to those who made the recoveries and those people who helped them.
Stuck in Stock Recovery when Rebooting Fix
Full credits to @ SivSomRao (telegram handle, since no XDA)
So, when I screwed my phone trying recoveries, I got stuck in FastBoot. no matter what I did, even Power + Vol Up got me to fastboot, and I had just wiped my OS, so I had nothing to boot into.
This happens when you wipe your SYSTEM and/or VENDOR partitions and choose reboot recovery, or flash an incompatible recovery.
After a lot of stressful minutes, I was scared half out of my mind. A guy named Shivsom helped me.
Basically what he made me do was
Download his file vbmeta_dv_shivsom.img that is given below in attachments.
Then copy the twrp.img file and vbmeta_dv_shivsom.img file to my adb Folder in my WindowsOS C drive.
Now, on your PC. Copy your TWRP.img file, or your OrangeFox.img (I prefer the TWRP.img file by Mauronofrio.)
Open the Command prompt in that folder
You can do this by clicking on the address bar of File Explorer and typing > cmd > then Enter
There type dir *img to confirm the file is found properly.
Now switch off your phone again.
Press and hold the power button + volume down button.
you will soon enter fastboot mode.
Now, on the new command prompt where you typed dir *img
type fastboot devices and you will get an output like
Code:
3e2f2d356 fastboot
Type the instructions
Code:
fastboot flash vbmeta vbmeta_dv_shivsom.img
Then type, (Since my twrp image file was re-named to twrp.img, if you haven't done so, do it)
Code:
fastboot flash recovery twrp.img
Then press and hold Power and Volume Up till you feel the haptic feedback see the TWRP recovery
Now, TWRP usage.
Now press and hold the power key + volume up to enter TWRP.
Once in TWRP, unlock it.
Go to MOUNT and check if MTP is enabled..... click on the "enable MTP" button.
Now copy the ofox.zip (orange fox recovery zip file) to your phone from your PC via your PC.
Now go to INSTALL tap the ofox.zip file, then flash it!
YAY now, orangefox is your Permanent Recovery.
Now go to MENU > Manage Partitions > select only data > format data > type 'yes' (This will delete everything in your Internal Storage so Caution)
Then quickly flash the latest miui vendor,
Now go to MENU > Reboot > Recovery
I was OverJoyed when this worked.
Now you can flash your Favourite ROM (normal clean flash, tutorial is given above), and then boot the ROM.
This was a nasty disaster. Glad I got through it.
Right, so I tried LR-twrp (it's in Chinese, but I can change the language to English). PitchBlack and PitchBlack-old Both broke my phone to get stuck in fastboot mode no matter what I did.
HENCE I conclude that for all Xiaomi devices, OrangeFox [OFX] is the best recovery. TWRP is suited for Samsung.
ERROR 7 fix and how to modify UpdaterScript
WHAT IS ERROR 7? :
Error 7 is an error that says the ROM you are flashing is not meant for your device.
It does so by comparing the phone's codenames.....
k20p and mi9tp have two codenames, one is RAPHAEL and the other is RAPHAELIN (the Indian variant)
Flashing the Raphael/raphaelin ROM on either device won't cause any problems at all.
feel free to flash it.
Latest orangefox 10.8 works with Raphael (global and Chinese variant) and orangefox 10.6 works with Rapahelin (Indian variant).
Alternatively, It could also be caused because you are required to flash the latest vendor, which you may have not.
So please read the one-line error message that appears above the ERROR 7 red message for more details
SOLUTION to ERROR 7:
I'd recommend flashing the orangefox 10.6 recovery as it's a lot simpler.
However if this doesn't work you can try updating script.
Right, so instead of using a different recovery, you choose to update the updater-script.
Copy the zip folder of the ROM to your PC
You can use 7zip software on your Windows PC. Download this software if you don't have it.
Double click the zip (don't extract it!!!) to open the zip.
Navigate to meta_info> com > Google > Android > you'll find update_script
Find the updater-script. Right-click on it, and choose the "EDIT" option. And edit the word Raphael to raphaelin (if you have the Indian variant of the phone)
Save and exit.
Click to expand...
Click to collapse
Creating Backups
Creating backups is always the safest thing to do, and you can do so via your recovery (OrangeFox or TWRP)
First, make sure you have everything working, nothing is broken in the ROM.
Second, go to your recovery and tap on Backup. Then Click on Create Backup, rename the file if you want to.
Third, Select all the partitions, cause why not, and let it finish creating the Backup.
Finally copy the backup file created to your PC in a safe location, and later when and 'if' you mess up, you can copy the backup file back and restore it.
You can restore by first wiping everything and formatting. (For safety) Then using the same recovery you used to create the backup, Flash the backup file. DO NO FLASH SOMEONE ELSE'S BACKUP FILES!!!!!! ONLY YOURS!!!!!!
How to Decrypt Your Phone.
So encryption is the safest thing for devices, It uses a secret code/key that only your phone knows to read data and information. However, when in Recovery, we Custom ROM enthusiasts like to have our data DECRYPTED. Now, This is because we can access our files from the recovery, flash ROMs only when decrypted, and transfer files. (If we have MTP enabled in recovery)
Somehow you've found yourself encrypted, which means all the files in your recovery are showing random letters + alphabets. and you cant transfer files to your phone via recovery anymore!
To solve this, or decrypt yourself. You will have to format your data partition (this will delete everything in your internal storage, so I hope you have a backup of your photos, vids, gifs, contacts, and so forth)
Just a bit of quick advice, If you can boot into your OS, go there, and transfer all your internal storage to your PC or laptop before formatting to avoid losing your stuff.
If you can't boot into your ROM, then you'll have to lose all your data in internal storage. No known method is known YET to help without losing the files.
Now the SOLUTION: Go to Orangefox settings > manage partitions > select data > tap on format > type 'YES' > swipe to confirm > you lose all your internal storage data contents, and you are now successfully decrypted.
OR if you are using TWRP. Go to WIPE > (right side button) FORMAT DATA > type 'YES' > you lose all your internal storage data contents, and you are now successfully decrypted.
You can now transfer files to your phone properly.
To stay decrypted and not get encrypted again, flash the DFE (Disable_Dm-Verity_ForceEncrypt_02.02.2020.zip) from attachments below (or from the file attachment called disable_force_encrypt.zip above in the first post/comment) and then boot into your ROM, or if you are flashing a new custom ROM, follow the tutorial above(first post/comment)
If you want to stay encrypted. (I advise against this) Just don't flash the DFE file.
The newer latest updated dfe file I have attached in this comment is from https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 and all credits for the file go to him. The dfe file in the first comment/post is different and also works.
How to Recognize Which Device You Have And What Vendor Should You Use?
Global, EEA, China, Indian, Russian variant?
All credits for this list go to @joshuah1971 aka Superuser1958 on telegram.
Box Packaging
k20 pro-China: purple+black box with Chinese writing.
k20 pro-India: angled photo of the phone on top+ white box (NO NFC capability. hardware, not software), identifier: raphaelin.
mi 9t pro-Global: black box+ picture of the device on top, English text on side sticker. (model: M1903F11G)
mi 9t pro-RU: same as global but with Russian text+ orange sticker on the phone.
mi 9t pro-EEA: white box.
Software Differences
miui Global: version number will include "QFKMIXM", google dialer, and messages.
miui EEA: version number will include "QFKEUXM", google dialer, and messages.
miui China: version number will include "QFKCNXM", miui dialer, and messages.
miui India: version number will include "QFKINXM", miui dialer, and messages.
miui Russia: version number will include "QFKRUXM", miui dialer, and messages.
So check which device variant it is, and use the appropriate Vendor when flashing. (Go to ROM's Settings-> About phone-> MIUI Version [code in the brackets])
Vendor Links
So regarding Vendors. Choose the one your device needs.
Namely, The Indian Variant is called Raphaelin. So get your vendor from https://xiaomifirmwareupdater.com/vendor/raphaelin/
The Global, Europe, China, and Russian Vendors are gotten from https://xiaomifirmwareupdater.com/vendor/raphael/
What is OSS Vendor? How to switch to the F2FS file system on OSS ROMs only?
What is OSS Vendor?
So our device has 5 variants.
Xiaomi firmware website has all 5 official (firmware+vendor) zip files.
"Always flash your variants vendor."
"Xiaomi never showed us what's in them. Aka closed source"
But this is so confusing for some people. Idky.
Therefore, some devs decided to make a universal vendor that will work on all variants. Since they are making it. They can optimize it and also always know what's in it.
This universal vendor is called an OSS vendor. (Open Source Software) (It's not yet perfect though)
Some custom ROMs don't include vendor (cause OSS isn't perfect yet)
Some custom ROMs include OSS vendor (so we can observe how good it is in daily use)
It's always good to know if the rom is using OSS or if we have to flash the official.
Currently. Since OSS isn't perfect yet. If the rom doesn't include vendor (or it's a custom miui) do not flash/use OSS with it.
How to switch to F2FS File system?
• Go to the rightmost tab on orange fox recovery > manage partitions > data > change FS > tap on f2fs > change FS
• Now reboot recovery
• Now reboot recovery again
• You are now f2fs.
~FINISH
~Do Comment and Thank, it'll bump this guide to be noticed more, so others can find this guide and get help as well
Info about Persist and why it is IMPORTANT to make a Backup
To make a Backup: Go to orangefox/TWRP recovery and select the Backup option and choose the persist.img option and back that up. Make a copy on your PC for added protection.
Persist.img is "persist" which contains data that shouldn't be changed after the device shipped, for example, calibration data of chips(wifi, bt, camera, etc.), certificates, and other security-related files. Persist is having keys to decrypt several pieces of stuff, it is device-specific and you shouldn't flash persist of others, very very bad idea.
How you are losing L1? By flashing someone else persist.img file, and if you have done that you already lost it. You cannot recover it. You can still restore your own old persist back up, and if you are lucky you will get L1 back. Never play with the persist partition it has important information specific to your device.
In case you've just lost it, and you've realized it immediately (cause sensors, pop-up, L1 are broken), & haven't done anything to modify yet. Then you can try to restore the context. Try doing this in a terminal emulator like termux (case-sensitive) Termux is an app on play store (requires root):
Code:
su
restorecon -F -R /mnt/vendor/persist/
There is also this really nice guide by William Feng that explains the same but a bit better here:
Backup and restore persist on K20 Pro and 9T Pro
Pop-up Camera Stuck Open Fix
Does not work on MIUI based ROMs. The App must be used on AOSP ROMs
Due to some reason you did, your phone's pop-up camera is stuck open. Too scared to push it down, or it isn't going down.
Download the apk k20pro_motor.apk from attachments below > Install it > when you open it, the dialog box will inform you to set the current state of the camera. Then click on the button to get the pop-up camera down.
Enjoy. Complete Credits to @acervenky from https://forum.xda-developers.com/k20-pro/themes/app-xiaomi-motor-control-k20-pro-t3984181
Xiaomi.eu and other Custom MIUI ROMs
Right, so Xiaomi.eu is a forum like XDA where devs make miui like ROMs without the Mi ads and tracking and are more optimized.
The website is: https://xiaomi.eu/community/threads/miui-11-0-stable-release.52628/
Under there, you go to MIUI 11 ROMs > stable ROMs > download the proper ROM zip file.
The direct download link is https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv11/ or you can use: https://androidfilehost.com/?w=files&flid=300229
Now download xiaomi.eu_multi_HMK20ProMI9TPro_V11.0.5.0.QFKCNXM_v11-10.zip CAUTION, the word PRO has to be there. we have k20p not k20.
This works for only Raphael users, not Indian raphaelin users. (For raphaelin users use Orangefox 10.6 it will work then.)
The difference between Stable and beta is that in beta, newer features, security is implemented and tested, this has bugs, once those features are stable, it becomes a STABLE rom, then the next batch of features are added to the beta. Get STABLE though, it's better, the beta has weekly 2GB updates.
Now flashing is easy, Follow the rules in the first post/comment on how to flash a miui ROM.
Equally, you may also choose to use MortalOS which is a debloated MIUI ROM which can be found here -> https://forum.xda-developers.com/k20-pro/development/memeui-12-rc5-09-05-2020-t4097469
Issues Related to L1, restoring, and china-based miui roms
Thanks to @Raaj52 for conducting experiments to confirm and collect this information.
You must have a global/Indian variant phone which currently has widevine working properly to have a chance at restoring it later. China phones can't get L1 (or at least, I haven't learned a way to do so yet.)
What is Widevine L1 and L3?:
Right, so L1 or widevine L1 is a DRM security made by google after they noticed people use root, etc to steal copyrighted videos and movies in full HD and post them somewhere else for free. (Netflix and Amazon prime video app being affected.)
Losing this, means you get L3, and widevine L3 does not allow you to stream Full HD videos anymore, but you can stream SD low-quality videos. Which is never ideal.[
Now, EU latest stable, MortalOS uses modified china vendor with k20p L1 patch
So how do I save my L1 then? L1 Retention?:
Fortunately @Raaj52 found out that if you take a full Ofox or TWRP backup or everything from EU rom, (making a save on the PC, just in case) before moving to those aforementioned China-based ROMs is good.
When you try flashing miui EU latest stable after losing it by flashing a MIUI custom ROM based on China vendors, your phone gets L1, it shows you have L1 too, however, the apps on your phone DO NOT recognize it, technically the phone recognizes the widevine L1 as broken, and somehow considers it L3.
Here is where the Backup you made comes in handy, Clean flashing the backup completely and perfectly restores your L1. He also states that moving from China-based ROMs to AOSP ROMs like EvoX via clean flash (wiping vendor as well and flashing the proper vendor before flashing the AOSP ROM in the recovery) will also restore L1 (remember to format data partition when moving from miui to AOSP)
Now, It should be noted that cross-flashing vendors is very DANGEROUS, as this may break your Fingerprint Sensor, DTBO and proximity sensors. Therefore you must always flash the proper vendor for your phone (global, Indian, china) don't try flashing a vendor that isn't for your device. Unless if it's a custom MIUI rom as custom MIUI Roms come included with a Vendor. (wipe vendor before flashing custom miui ROM, after flash, don't touch the vendor)
Global vendor and Indian vendor are partially similar, and we have reason to believe that EU stable uses a modified vendor that works for both Raphael and Rapahelin. This is why EU ROMs works on both devices (MI 9t-pro and K20-pro)
Some Things to be Cautious about and to note:
Quoting our messages on telegram here:
The basic is, EU rom comes with vendor file so no need to flash a separate vendor for them. Flashing any vendor over the EU might break something because we don't know really which vendor they are using, assuming stables are global and betas are china.
On the other hand, AOSP comes without any vendor file, so it becomes mandatory to flash a vendor based on your device default vendor.
We flash vendors only when we flash AOSP's. In miui custom ROMs vendor is included.
Exception: If something is broken, clean wipe, flash your vendor, and then (advance wipe everything, including vendor) clean flash miui custom/AOSP.
Practically speaking, if you are moving from your stable own rom to Evox or any AOSP, no need to flash vendor since it is already having the default files but this is double confirm that the vendor is correct and it will not harm anyone. (AOSP to AOSP, not required to wipe vendor, but you can if you want to, I recommend wiping it and flashing your vendor again)
These are separate partitions and it will not override but to be on the safer side most rom devs prefer vendor and then rom.
If you flash an AOSP rom and want to move to a custom/stock miui rom make sure that you are own correct vendor. (Prior to wiping it in advance wipe) If not sure flash your vendor once again, then clean wipe and flash miui based rom.
Click to expand...
Click to collapse
How Get Back To My Stock ROM and/or Lock Bootloader?
To get back to your stock ROM, you have two methods, namely recovery zip ROM flash or fastboot ROM flash.
Get your stock rom from https://xiaomifirmwareupdater.com/archive/miui/raphael/
or if you need the Indian variant, Get your stock rom from https://xiaomifirmwareupdater.com/archive/miui/raphaelin/
Now, AND THIS IS SUPER IMPORTANT. Make sure you double-check and download the proper device's Region, codename, android version, and THE TYPE!!! (there are two types: recovery and fastboot types, choose the one you need)
Now for the recovery method, flash the recovery type .zip file the same way you flash any miui custom ROM. Check guide in first post/comment for method.
Now for the fastboot method, go to your mi-flash tool and enter fastboot on your device, and flash the rom there. (Now, I personally never did this method, so I can't guide the exact steps for this method, sorry)
LOCKING BOOTLOADER: You must first be using the proper stock vendor, stock rom via fastboot, and not have magisk or any MODs running on your phone. If you violate these, you WILL Hard brick your device. It is because of this I VERY STRONGLY advise against locking your bootloader for any reason whatsoever. JUST DON'T!!!
However, you can you the mi-flash tool (safest) or the debloater tool to lock your bootloader if you definitely must do it.
• Download MiFlash tool from MiFlashTool Website . The latest is the top left, marked with a NEW tag.
extract the file, and run the program "XiaoMiFlash.exe"
• Download the stock fastboot miui rom from Fastboot Website and extract the file (if its a .tgz or .tar extract again) you'll end up with a folder with one folder and 11 files (images, flash_all.bat.......misc.txt)
• Now in whatever rom you are on, go to developer settings, enable "OEM Unlocking" and "USB Debugging"
• Now boot into fastboot mode
• Connect your device to your PC
• Now in MiFlash tool, at the bottom, choose Clean all (and dont LOCK IT, I repeat do not choose to lock)
• Then on the top click on the "select" button and navigate to the folder with the 11 files & 1 folder and choose that folder.
• Click on the "Refresh" button and check if your device is shown (indicated by random numbers/letters)
• Now (recheck if its only CLEAN ALL only, and NOT lock or anything else)
• Now flash
• Wait 420s approx, or more, or less.
• It'll finish with an error and the message will say
• "error: Not catch checkpoint (\$fastboot -s . ' lock),flash is not done"
• This is cause it did not lock your bootloader. THIS IS GOOD.
• Now wait 5-10mins while miui 12.5 loads up/boots, it takes a while.
• Now, close MiFlash program, its done, no more needed.
• Now that's done, use miui 12.5 if you want, or go to recovery
• You'll see you have stock recovery now
• So go to fastboot mode, (phone connected to PC)
and flash the ofox recovery.img to get ofox recovery. via the cmd command like usual.
• Then go to recovery ofox.
• Go to wipe > format > type yes > format data to decrypt
• Reboot to recovery
• Now copy your ofox zip file to phone,
• Now flash that file to make OFOX permanent
• Now reboot to recovery again.
Click to expand...
Click to collapse
Latest MIUI-CN builds and miui custom ROMs soft bricking your device? (Mostly Raphaelin users)
Right, so this is a Xiaomi thing, which happens to many Xiaomi-based devices. It was later observed by a member on telegram that this usually happens to devices without NFC. In our case of Raphael - This would be Indian devices or Raphaelin devices.
I personally haven't experienced this, so I can't give a personal experienced-based guide on fixing this. However, another user on telegram @rockyanexpert solved his problem and shared this guide given below with me.
[
System has been destroyed. What I did:
1. Panicked a little
2. Started my lappy
3. MiUnlock Tool was pre-installed v3.xx
4. It took almost 10 minutes to show the login prompt. The connected device in fastboot. It failed to recognize the device. Started MiFlash. It did recognize the device.
5. Downloaded the latest MiUnlock. It too failed to recognize the device.
6. Downloaded XiaoMiTool v2
7. It detected the device fastboot serial correctly
8. Manually selected model Raphael.
9. Started with My device is bricked
10. It detected a locked bootloader. Opened its own version of Unlock Tool. Logged in to binded Mi Account. (My Mi Account n the binded one is the same)
11. Unlocked.
12. Tool went on ahead with waiting for the device to boot in fastboot mode.
13. I removed the device n forced boot in recovery mode. Ofox showed "Updating" n booted in orange ofox screen.
14. Rebooted system
15. Newly flashed Eu 21.2.3 started initial setup.
No data lost.
Click to expand...
Click to collapse
By these same people, they made a guide here: System destroyed issues
~FINISH
~Do Comment and Thank, it'll bump this guide to be noticed more, so others can find this guide and get help as well
nice work @Sandeeep Kiran, keep it up.
Just got my 12/512 yesterday but my wait time is 15days (it said 360hours).:fingers-crossed:
Hi, probably today i wil try to flash xiaomi.eu rom but i have some doubt, why you are saying that wipe system is required for flash a custom rom? i have read in several thread that this wipe is not rquired
salva93 said:
Hi, probably today i wil try to flash xiaomi.eu rom but i have some doubt, why you are saying that wipe system is required for flash a custom rom? i have read in several thread that this wipe is not rquired
Click to expand...
Click to collapse
Right, so I actually had the same doubt for a while. Noone in the group seemed to properly answer this.
Some said you should, some said you shouldn't.
So I talked to the devs of note 2 (my old phone, most members now have xiaomi phones)
They all said system is required to be wiped.
However before they answered. I can already listened to our group members and figured, I will not wipe system and flash my ROM as it is.
When I did this. I noticed the recovery throwing an error from magisk. That magisk modules aren't linked to anything, and this will/may cause problems.
After reading that message I realised. System wipes everything. And if you are dirty flashing/ clean flash with no mods. System is not required to be wiped.
However most people use magisk modules. Root changes, 75hz mods and so forth. This is when system is required to be wiped.
Now. As a general rule. It is good to wipe system. No harm is being done in wiping it. Hence I reccomend it.
Although, if anyone does have a particular reason that system shouldn't be wiped. I'd love to hear the explanation of it. But this is what I know of after research. I'm still no expert in everything.
Sandeeep Kiran said:
Right, so I actually had the same doubt for a while. Noone in the group seemed to properly answer this.
Some said you should, some said you shouldn't.
So I talked to the devs of note 2 (my old phone, most members now have xiaomi phones)
They all said system is required to be wiped.
However before they answered. I can already listened to our group members and figured, I will not wipe system and flash my ROM as it is.
When I did this. I noticed the recovery throwing an error from magisk. That magisk modules aren't linked to anything, and this will/may cause problems.
After reading that message I realised. System wipes everything. And if you are dirty flashing/ clean flash with no mods. System is not required to be wiped.
However most people use magisk modules. Root changes, 75hz mods and so forth. This is when system is required to be wiped.
Now. As a general rule. It is good to wipe system. No harm is being done in wiping it. Hence I reccomend it.
Although, if anyone does have a particular reason that system shouldn't be wiped. I'd love to hear the explanation of it. But this is what I know of after research. I'm still no expert in everything.
Click to expand...
Click to collapse
Many thanks for your answer, so for now i will not risk and i will follow instructions on xioami.eu website, i'm in clean situation so i should not have any issue
bump
Good guide. Have a bump.
But till this day (Jan 6, 2020), no custom roms are stable or bugfree enough for the exception of xiaomi.eu
Default MIUIrom just works. But I hope in the near future we get to see bugfree roms and I will certainly try it! I have always used PE on my previous phones.
Cheers!!!!
bumpity bump
Nice infomation dude
whatsapp dark
root user used
Swift Installer - Themes & color engine
just share my opinion
Good guide, thx.
Guys, one question, i have to mount System/Vendor and other to wipe, or can i simple wipe without mount?
bigatim said:
Good guide, thx.
Guys, one question, i have to mount System/Vendor and other to wipe, or can i simple wipe without mount?
Click to expand...
Click to collapse
Nah, Mount is to send/transfer files.
Since you arent doing that, you dont have to mount system or vendor, but mount your internal storage though.
and for the L1 flash, mount vendor for that only, soon a magisk mod will be available for it.
So when do we need to flash disable force encryption?
If I am correct, you can simply format data and get rid of your encryption. In this case you do not need to flash disable force encryption. Also, can't you just decrypt before starting the flashing process?
I've tried RevOS and I came back to mmx.
And widevine L1 is not break. Everything gone fine.
Krullendhaar said:
So when do we need to flash disable force encryption?
If I am correct, you can simply format data and get rid of your encryption. In this case, you do not need to flash disable force encryption. Also, can't you just decrypt before starting the flashing process?
Click to expand...
Click to collapse
DFE is to remove encryption.
when you format data partition, you remove the dfe. You do this when moving from AOSP to miui or vice versa.
you can't decrypt before flashing cause there isn't a system or any data to decrypt. After you add a ROM or data, you can decrypt that.
yes, the format will get rid of your encryption. (but you also lose all your data) so flashing dfe helps retain your data. If you're scared someone will go to your recovery and steal data, add an orangefox password in its settings. Alternatively, you also have the dm-verity settings in orangefox settings you can enable. But redundant as its all included together in the dfe file I've attached.
Sandeeep Kiran said:
L3 Fix, Getting L1 after getting L3 for Global and Indian Users.
@Raaj52 Found a solution to fix L3 and get L1 again.
This fix however only works on Global and Indian vendors. (i.e mi 9t pro and k20p Indian variant)
No such solution has been found for china phones, using china vendor, DO NOT CROSS FLASH VENDORS!! it will cause a bootloop.
This patch was made for the latest EU beta, miroom. We hope it also works for future versions, and previous versions, but we are unsure. You can experiment and inform us though in the comments below.
Always have a proper fully working backup of everything rom. As caution. It's always good to take precautions.
Pop-up Camera Stuck Open Fix
Does not work on MIUI based ROMs. The App must be used on AOSP ROMs
Due to some reason you did, your phone's pop-up camera is stuck open. Too scared to push it down, or it isn't going down.
Download the apk k20pro_motor.apk from attachments below > Install it > when you open it, the dialog box will inform you to set the current state of the camera. Then click on the button to get the pop-up camera down.
Enjoy. Complete Credits to @acervenky from https://forum.xda-developers.com/k20-pro/themes/app-xiaomi-motor-control-k20-pro-t3984181
~FINISH
~Do Comment and Thank, it'll bump this guide to be noticed more, so others can find this guide and get help as well
Click to expand...
Click to collapse
hi, I followed the instructions. Netflix black screen problem still continues.What should I do ?
masik x 9.4 - black screen problem - security patch January
mi room 20.1.16 it works fine - security patch is still 2019.12.01
please masik x 9.4 fixed black screen problem.
thank you.
uurturk said:
hi, I followed the instructions. Netflix black screen problem still continues.What should I do ?
masik x 9.4 - black screen problem - security patch January
mi room 20.1.16 it works fine - security patch is still 2019.12.01
please masik x 9.4 fixed black screen problem.
thank you.
Click to expand...
Click to collapse
The patch was intended to work on security patch Jan 20th and above, which maisk is not yet updated too.
(however, @ QasimXAli in the official telegram group did manage to make it work. you can tag and ask him there.)
Currently, the person who made the mod is still working to converting it to a perfect magisk module so it's easier to flash. Also, he is waiting for the next stable update to check whether the magisk module patch will continue to work.
We just gotta wait a bit longer.
ghaf85 said:
Nice infomation dude
whatsapp dark
root user used
Swift Installer - Themes & color engine
just share my opinion
Click to expand...
Click to collapse
Thanks.
Under add-ons, I added how to get WhatsApp dark (currently in WhatsApp official beta, which will roll out to stable in three months.)
For root, everyone just uses magisk latest stable.
and Solid Explorer or Mi-explorer
I like swift, liv and flux too. but those are straight-forward. I can add them to "add-ons" if you like.
How to install Xiaomi.eu ROM for Redmi Note 9S / 9 Pro India
We will release fastboot ROM versions until TWRP for curtana is released
TWRP for curtana is released.. so all next version will be for TWRP, not fastboot..
Steps to install our ROM for FIRST TIME from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file HERE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system:
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot its done (first boot may take up to 10min)
Steps to install UPDATE of our ROM (All your data and files on internal storage will NOT be deleted!)
- Download our ROM zip file STABLE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system:
For Windows OS ./windows_fastboot_update_rom.bat
For Linux ./linux_fastboot_update_rom.sh
For MacOS ./macos_fastboot_update_rom.sh
- After reboot its done (first boot may take up to 5min)
Update via OTA:
Installation via OTA is currently not possible due to missing TWRP
Updater will notify you about new version and download it to your device for you
You have to copy it to your PC, unpack it and run fastboot_update_rom sctipt
Xiaomi.eu ROM features
Based on China Stable / Weekly builds (except POCOF1, HMNote6Pro, HMNote8T, HMNote9ProMax, HMNote9Pro_HMNote9S)
Enabled search gesture (swipe up) on the desktop
3way reboot menu (in dev settings)
Dark Mode (Night Mode) for all devices (In the dev settings except 9.x/10.x)
Removed ads in MIUI system apps
Face Unlock for all devices
Vertical clock widget on lockscreen
Steps counter in Assistant screen
More shortcuts on left lockscreen
Wake up gestures
AI preloading option in MIUI Lab
Fullscreen gestures
Option to auto-expand first notification
Notifications priority settings
More edit options in Gallery app
Enabled MiDrive in File Explorer
Added landscape mode for SMS app
Sunrise/Sunset in the weather app
Google apps support integrated
Removed 5GHz region restrictions
Confirm dials from call logs
Morning report on alarm at morning
More apps supported for AOD notifications
More styles for AOD screen
Raise to wake gesture
AOD notification received animation
Default volume control stream toggle
Tap fingerprint sensor to wake toggle
More Camera features
Double tap to lock screen
Battery AI scenes
Allowed disabling specific system apps
Importing theme .mtz from zhuti.xiaomi.com via ThemeManager
No useless Chinese bloatware apps
More free RAM due to less background processes
Unified flat style app icons for both system and 3rd party apps
Advanced menu with color icons
No any Chinese character under the full system
Mi Video, Mi Music, Mi Browser: No any useless Chinese content
No possibility to re-lock bootloader accidentally with flash any xiaomi.eu release
Added real 27 languages translation made by Official MIUI Fansites and MIUI Fans
Added EU T9 dialer support
Added charging sound switch
Added Screen-OFF animation
Optimized GPS settings for EU
Optimized Battery consumption
Optimized RAM consumption
Added 3D Touch to MI5S 3GB RAM version
Added GSMalphabet into SMS app options
Added more icons grid layout 4x5, 4x6, 4x7, 5x5, 5x6, 5x7 (depends on device)
SafetyNet passed (Google Pay)
Play Store Certified
Deodexed
Added automated tasks in Security app
Added game speed booster
Added erase module (magic elimination) to Gallery photo edit options
Fixed low volume sound via headphone
Charging screen
And more, and more made by our 9 years MIUI mods experience.
Enjoy..
Bro,
I tried this method.
Command window force close in between.
Now my device is booting in fastboot screen.
Please help me
What to do
rohit1990 said:
Bro,
I tried this method.
Command window force close in between.
Now my device is booting in fastboot screen.
Please help me
What to do
Click to expand...
Click to collapse
You connect devices to computer in fastboot mode
-open Mi flash tool and flash official FW
I think it better to wait for twrp to release first and then all are become more easy to flash rom
@ingbrzy
What is the difference between this rom and indian rom which comes with the phone?
Please explain, i want to know.
Randsome said:
@ingbrzy
What is the difference between this rom and indian rom which comes with the phone?
Please explain, i want to know.
Click to expand...
Click to collapse
https://xiaomi.eu/community/threads/miui-11-0-stable-release.52628/
ingbrzy said:
https://xiaomi.eu/community/threads/miui-11-0-stable-release.52628/
Click to expand...
Click to collapse
I got the phone with the global stable, can I use the method in OP?
sure..
Not Working
Please be carefull.
Version V11.0.1.0 causes an infinite reboot loop to Redmi Note 9s devices.
Version V11.0.3.0 or higher works fine.
What I idid:
- Installed all required drivers.
- Unlocked bootloader after waiting 168 hours.
- Downloaded ROM
- unzip ROM
- Ejecute windows_fastboot_first_install_with_data_format.bat
- It finish with 3 errors. The script try to install these files, but they are missing from the ROM:
- firmware-update/recovery.img
- firmware-update/logo.img
- firmware-update/multi_image.mbn
- After the script finish, the device reboots automatically.
After a time, the initial setup screen to connect to a wifi shows up... then after a few seconds it reboots.
It doesnt matter how many times you try, it alwais reboots.
It doesnt matter how many times I reflash. It just dont work.
I'm not the only one with this problem. There is more people reporting the same problem:
xiaomi.eu/community/threads/miui-11-0-stable-release.52628/page-98
Edit: Version V11.0.3.0 or higher works fine.
can you try install it on linux OS?
seems make_f2fs binary has an issue on windows install process.. so can not format userdata partition properly..
you can try to install this fastboot india global rom below
https://mifirm.net/model/curtana.ttt
After flashing the indian global ROM, the device works again.
It's recogniced as Redmi Note 9 Pro instead of 9S, but it works.
yeah you use fastboot rom right?
Remember do not select clean all and lock (which will re-lock your bootloader)
That's exactly what I did
Thank you.
DjXavy said:
After flashing the indian global ROM, the device works again.
It's recogniced as Redmi Note 9 Pro instead of 9S, but it works.
Click to expand...
Click to collapse
You can flash the global ROM (not india) via https://mirom.ezbox.idv.tw/en/phone/curtana/
This is the direct link to download the flashable rom: https://bigota.d.miui.com/V11.0.3.0...M_20200318.0000.00_10.0_global_991071324c.tgz
Released V11.0.3.0.QJWMIXM..
- Fixed bootloop after install..
Will we be able to pass from stable eu to developer eu (when it's released) without losing data?
Sent from my Redmi Note 9S using Tapatalk
There are no more dev global roms released.. Stables only..
Cant flash the rom. Only write boot and stop after this. Dont do anything more. Any idea?
Try to flash it under linux if you can. Execute linux_fastboot_first_install_with_data_format.sh with root privileges.
It should work, at least it worked for me.
GravityBox - all-in-one tweak box - Xposed module for devices running Android 11
Version 11.0.5 [R]
Version for JellyBean is available in this thread: https://forum.xda-developers.com/showthread.php?t=2316070
Version for KitKat is available in this thread: https://forum.xda-developers.com/showthread.php?t=2554049
Version for Lollipop is available in this thread: https://forum.xda-developers.com/showthread.php?t=3037566
Version for Marshmallow is available in this thread: https://forum.xda-developers.com/showthread.php?t=3251148
Version for Nougat is available in this thread: https://forum.xda-developers.com/showthread.php?t=3653953
Version for Oreo is available in this thread: https://forum.xda-developers.com/showthread.php?t=3739929
Version for Pie is available in this thread: http://forum.xda-developers.com/showthread.php?t=3908768
Version for Q is available in this thread: http://forum.xda-developers.com/showthread.php?t=3974497
READ THIS POST CAREFULLY BEFORE PROCEEDING ANY FURTHER
Introduction
The app utilizes Riru-EdXposed Magisk module which uses original Xposed Framework API created by rovo89.
!!!!!! WARNING !!!!!!
This module utilizes EdXposed Framework which is still in early development stage and may contain bugs or might not be fully compatible with the system of your Android device. I take no responsibility for any issues arising from using GravityBox with EdXposed and strongly recommend creating a full backup of your device before activating the module.
Requirements
- Magisk v21 or later
- Riru v23 or later (Magisk module)
- EdXposed Manager (Application)
- Avoid using Resource hooking support if possible (Can be disabled in EdXposed Manager settings)
Installation
This procedure assumes you have working Magisk installation.
1) Install Riru module in Magisk Manager
2) Install and run EdXposed Manager app and download Riru-EdXposed module v5.1.3.x or later (currently Alpha/Canary)
3) Install downloaded Riru-EdXposed module in Magisk Manager
5) Reboot and open EdXposed Manager app to check if EdXposed works and is active
6) Install GravityBox and enable it in EdXposed Manager
7) Reboot and profit
Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone Services (com.android.phone)
- Phone (com.android.incallui) (OxygenOS only)
- Keyboard app (e.g. Gboard) in order to be able to use "Volume key cursor control" feature
It is strongly recommended to use Whitelist functionality for better performance as EdXposed hooks only smaller amount of processes.
In case of running multiple Xposed modules consult their whitelist requirements with the devs of module.
Feature highlight
--- Lockscreen tweaks
--- QuickSettings tile management with additional tiles
--- Statusbar tweaks
--- Navigation bar tweaks
--- Pie controls
--- Power tweaks
--- Display tweaks
--- Phone tweaks
--- Media tweaks
--- Hardware/navigation key actions
--- GravityBox Actions - interface for 3rd party apps
--- Notification control (per-app notification LED/sounds/vibrations)
--- Fingerprint launcher
--- Advanced tuning of Framework and System UI parameters
... and many more
Compatibility
GB's main concept is to make most of the preference changes to be done on the fly without need to reboot a device to achieve custom-ROM like experience.
This means it is not possible to "completely deactivate" particular feature if it causes trouble on your device or if you installed GB because you want to use only one particular feature you can't find elsewhere.
This results in issues on ROMs/devices that have parts that are diverting from default Android implementation too much, or are running heavily modified custom ROMs.
If you experience weird issues after installing GB, even if you didn't activate a particular feature, it is not because of GB is broken, it is because it is not compatible with your ROM.
It is very similar to a situation when you installed ROM built from source for Nexus to some Xperia device - it won't work.
GB is a complex module and is not suitable for 1 purpose scenario. This means, if you are running custom ROM built from source, and you are missing a certain feature, your best option is to go ask creators of those ROMs to implement those additional features. Supplementing missing features on well-known custom ROMs built from source by installing xposed modules (especially complex ones) is definitely not a good way to go and can cause more trouble than good.
GB being a complex module, it shouldn't be combined with other complex modules often racing for the same goal. They can conflict/fight on the same playground and there's no way you can deterministically say which one's going to win. They can even lose both.
So in summary:
- this module is designed to run on vanilla or close-to-vanilla Android 11 (AOSP)
- officially supports devices/systems it was developed and tested on
- Samsung, HTC, MIUI, Xperia, Lenovo, etc. are NOT supported. It is not guaranteed this module will work on these at all so try at your own risk. This module is simply too complex to support all kind of ROM brands that were vastly modified by vendors.
- DO NOT USE WITH CUSTOM ROMS MODULE WAS NOT EXPLICITLY DESIGNED FOR
- I will not implement any exceptions that will adapt this module to a specific custom ROM. Please, do understand, it is unmanageable.
- I will not provide any support for devices violating these compatibility rules
GravityBox [R] has been designed for and tested on
- Pixel 3a running Google OS
- OnePlus 7Pro running Oxygen OS 11
Reporting bugs
If possible, please use Github issue reporting interface for reporting bugs.
If you experience problems with certain feature, provide the full-detailed info that can help me
to reproduce the bug and attach logs that can be exported from EdXposed Manager app.
Real-time logging can be performed by using ADB: adb logcat -s EdXposed-Bridge
In case you experience SystemUI crashes or other apps Force Closing, or device soft reboots, attach logcat from time
crash occurs. (use adb logcat *:E or your favorite logcat app from Play Store).
Please, don't attach big logs. Only the portion where error is clearly seen.
Disable all other xposed modules before reproducing bug to make sure it is really GravityBox related
Remember, this app was developed and tested on one particular device so it is not guaranteed that it will work flawlessly on yours.
Multilanguage support
Volunteers are welcome to translate GravityBox to other languages.
Preferred way is to use GitHub interface to fork your own copy of GravityBox, make changes and then send pull request against original repository.
Anoter way is to simply download this file: https://github.com/GravityBox/GravityBox/raw/r/GravityBox/src/main/res/values/strings.xml
Use Notepad++ to edit strings and then send me edited file so I can include translations into next release.
Source code
GravityBox is opensource. Sources are available in my gihub: https://github.com/GravityBox/GravityBox/tree/r
If you're a dev and have some ideas for additional features, feel free to fork it, work on it and send the pull requests.
Copyright notice
https://github.com/GravityBox/GravityBox/blob/r/NOTICE
Support development
Coding, maintaining and supporting this project costs me a lot of my precious time. If you find this project useful, you are more than welcome to support its development via donation. This form of support is meant to compensate for my time dedicated to the community + eventually, help me to afford newer device to keep up with AOSP evolution thus providing continuous support as Android evolves. Thanks!
Info about premium features and PayPal transaction ID verification system
1) Those who supported development via PayPal donation can use their PayPal transaction ID to unlock premium features.
As of v2.9.5, there are three premium features:
- Backup/restore of GB settings.
- Ultimate notification control
- Advanced Tuning
2) If you contributed to the project by providing translations, code fragments, or by any other way
you can apply for a free transaction ID by contacting me via PM.
3) Be aware that there's a system that can identify potential transaction ID
abuse. E.g. when one ID is being used by more users. Such IDs will get blocked automatically.
In case you own more devices, you can use one transaction ID on up to 10 of them.
4) If you are using your own custom builds of GB for personal use, you will get hash mismatch
upon verifying your ID as verification system accepts requests only from official releases of GB.
If you want to be able to verify IDs with your custom build, contact me via PM so I can setup
a special hash for your build.
If you are using a custom build that you provide for broader group of users (e.g. in a custom ROM),
it is necessary to ask for new hash everytime your new custom version is released for public use.
These rules are based on mutual trust so please, do not violate them.
Credits
- RikkaW for creating and maintainng Riru Magisk module
- solohsu & MlgmXyysd for creating and maintaining EdExposed Magisk module
- @frank93 for donating Pixel 3a for development
- @bgcngm for his code contributions to the project
- @MohammadAG for Xperia specific contributions to the project
- @rovo89 for his ultimate Xposed framework and "Volume keys to skip track" mod
- @peptonib for starting me up with this project
- @simmac for app icon
- @romracer for Motorola specific code contributions
- @firefds for Samsung specific code contributions
- CyanogenMod project
- ParanoidAndroid project
- Slim, RootBox, AOKP, OmniROM projects
- Sergey Margaritov for ColorPickerPreference
- ArthurHub for Image cropping library
- All those who provided translations for different languages (Mr.Premise, peptonib, kidmar, ch-vox, romashko, Indiant, lelemm, oicirbaf, unavix, LuHash, WedyDQ10, mp3comanche, awaaas, liveasx, samsonbear, Eric850130, xtrem007, benjoe1, asmb111, Fatih Firinci, ...)
- and finally, all those who keep the project alive by supporting me via donations (you know who you are)
Changelog
https://github.com/GravityBox/GravityBox/blob/r/CHANGELOG.txt
Changelog 11.0.5 - 08/08/2021
- Lockscreen: added option to blur media artwork on lockscreen (thanks to robbins)
- Navbar: allow cursor control keys in gestural navbar
- Dialer: adjusted for compatibility with the latest Google Dialer
- Properly identify OnePlus 8T as device running OxygenOS ROM (thanks to F-i-f)
--- should improve compatibility significantly
Developed and tested on:
- Pixel 3a running Google OS
- OnePlus 7Pro running Oxygen OS 11
Current issues
- Display: Expanded Desktop - immersive modes not working
- Key actions: Home double-tap not working
- Lockscreen: Changed custom carrier text won't appear immediately
- Custom Battery indicator: stock battery may appear for a while after the reboot
- ... + potentially others mainly device/system variation specific
Removed features
- GPS and SlimKat tiles - location modes (battery saving/high accuracy/device) no longer exist in Android 11
- Audio Recording tile - background recording of audio not possible in Android 11
Download
https://github.com/GravityBox/GravityBox/releases/tag/v11.0.5_r
Settings
It is possible to restore settings that were backed up in GravityBox [Q]
Simply transfer "GravityBox" folder from internal storage of one device to internal storage of another device.
Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone Services (com.android.phone)
- Phone (com.android.incallui) (OxygenOS only)
- Keyboard app (e.g. Gboard) in order to be able to use "Volume key cursor control" feature
It is strongly recommended to use Whitelist functionality for better performance as EdXposed hooks only smaller amount of processes.
In case of running multiple Xposed modules consult their whitelist requirements with the devs of module.
Credits
@frank93 for donating Pixel 3a for developemnt
Commit history
Commit history for transition from 11.0.4 to 11.0.5
@C3C076
Mate, you did it. Congratulations.
Can't wait to try it out.
Really appreciate your efforts in bringing this to us 11ers.
Cheers
2021 is looking good! Thank you so much. Working flawlessly on my pixel 3a
@C3C076
THIS is the first gift I've received of the new year. Thank you, sir!!!
Now, that's pretty awesome!
And the January update from Google should drop soon as well.
Thanks a lot @C3C076!
Got my Github notification this morning about the [R] pre-release! Just now updated my Pixel 4 XL from 08-2020 (Android 10) to 09-2020 (Android 11) using my keep root / seamless update method with no problems. Everything working perfectly fine! All I had to do was first disable GravityBox [R] in EdXposed Manager, and disabled Kirisakura AK3 (kernel) module helper in Magisk Manager. Upgraded to Android 11 with no issues at all, and everything system and root-wise seems to work perfectly fine. My current running list of Magisk / Xposed modules: https://forum.xda-developers.com/t/guide-edxposed-gpay-discussion.3992607/post-84193393
(I'm hoping @Ghisy finds this helpful, hehe)
Though I'm gonna play it safe and OTA each month, instead of factory image (sans "-w" flag) jumping. Gonna work my way up to the current firmware, then test out GravityBox [R] - thanks so much @C3C076! The fact that so many people like me have held off on upgrading to the latest Android version just based on your work should speak volumes! I'll report back once I'm able to actually play around with GB[R] some. The baby's starting to wake... :O
edit: my son rolled over, coo'ed, and faceplanted back to sleep <3
- Also should note, I was on Kirisakura 5.2.6 kernel before. Now on 6.6.0, all is well!
- Also wanted to note, SafetyNet was passing (with my current configuration) on 09-2020 build with no further modifications necessary. I just finished updating up to 12-2020, and SafetyNet is still passing . Activating GravityBox module now, and will further report back!
edit 2: Seems verrrry stable so far! The only thing I found that didn't work properly (or rather, worked 80% correctly) was for an option that I don't even normally use, and accidentally toggled, haha. Under QuickSettings management -> Tiles per header, each option works fine, but when selecting 8, it still only shows 7.
Other than that, at least as far as the options that I personally use, everything seems fine! I didn't get a chance to test out every function affected by my set of GB options in such a short time, of course, but I will certainly report if there are any issues. And of course I won't list every single option I ticked off, but attached is my backup file / preferences of my current config for anyone who may be curious. Again, keep in mind that compared to the vast functions GB offers in totality, I only use what I use so of course I can't account for the entirety of GB. But from what I've tested so far, it seems damn stable and this has made my transition to Android 11 pretty much seamless!
and @Ghisy, I'll send you some more details when I get a chance, certainly well before the weekend. Though if it's any consolation, in total the actual updating process only took me about an hour, if not less! Probably took me more time to actually download the files and prep, lol. XD
i5lee8bit said:
Just now updated my Pixel 4 XL from 08-2020 (Android 10) to 09-2020 (Android 11) using my keep root / seamless update method with no problems.
[...]
My current running list of Magisk / Xposed modules: https://forum.xda-developers.com/t/guide-edxposed-gpay-discussion.3992607/post-84193393
(I'm hoping @Ghisy finds this helpful, hehe)
[...]
Activating GravityBox module now, and will further report back!
Click to expand...
Click to collapse
Ha, thanks!
I'd be interested in your seamless update process if you don't mind sharing! Although I might go the image (sans -w) route instead.
Not sure I'll update until the week-end, I don't have much time on weekdays.
Ghisy said:
Ha, thanks!
I'd be interested in your seamless update process if you don't mind sharing! Although I might go the image (sans -w) route instead.
Not sure I'll update until the week-end, I don't have much time on weekdays.
Click to expand...
Click to collapse
see my edit above =)
But I also wanted to separately post a big finding of great news (at least for me)! - The volume key cursor control option now seems to persist through reboots, without needing to toggle the option again after reboots! Not sure, tbh, if this was fixed on [Q] already due to / as a side effect of the big Riru / EdXposed updates, but at least I can confirm that it definitely works on [R] now as intended. Woohoo!
Also @C3C076, donated an extra $10 USD via PP (20485146561217901). You're already very generous for enabling Family Library, and this should cover for installing the unlocker on my backup/secondary Android devices as well as my wife's phone. I also figured it would be better to donate via PP than disabling Family Library and purchasing again from Play Store, assuming higher fees from Google.
i5lee8bit said:
see my edit above =)
But I also wanted to separately post a big finding of great news (at least for me)! - The volume key cursor control option now seems to persist through reboots, without needing to toggle the option again after reboots! Not sure, tbh, if this was fixed on [Q] already due to / as a side effect of the big Riru / EdXposed updates, but at least I can confirm that it definitely works on [R] now as intended. Woohoo!
Also @C3C076, donated an extra $10 USD via PP (20485146561217901). You're already very generous for enabling Family Library, and this should cover for installing the unlocker on my backup/secondary Android devices as well as my wife's phone. I also figured it would be better to donate via PP than disabling Family Library and purchasing again from Play Store, assuming higher fees from Google.
Click to expand...
Click to collapse
Thanks. Your support is very much appreciated. Too kind. Interesting find about volume key cursor control. As you can see in the 2nd post I listed it there as currently not working . Looks like I'll have to take a look again. Do you use whitelist (App list mode enabled in EdXposed settings) ?
i5lee8bit said:
see my edit above =)
Click to expand...
Click to collapse
would you mind sharing your upgrade procedure from android 10 to 11 though? i’m not sure why, but my "usual" procedure (using the complete firmware, patching the boot.img, flashing everything including that boot-image afterwards) fails with all of the android 11 images. :/
(feel free to directmessage if you think it’s off topic here of course.)
frank93 said:
would you mind sharing your upgrade procedure from android 10 to 11 though? i’m not sure why, but my "usual" procedure (using the complete firmware, patching the boot.img, flashing everything including that boot-image afterwards) fails with all of the android 11 images. :/
(feel free to directmessage if you think it’s off topic here of course.)
Click to expand...
Click to collapse
If I can share my experience. I applied standard system update procedure from settings being on Pie (had it on your pixel to bring update for GB for Pie). This went without uninstalling magisk etc. I simple went incrementally from Pie through Q up to R and then several security update. Only after I was in the latest update I grabbed boot.img from corresponding system image, patched it using magisk and then flashed using fastboot. All apps and settings were preserved from Pie.
thanks. sounds about "right", your last step is basically what i’ve been doing as well previously (the "system update" never worked for me though, but i didn’t care too much). there must be something fishy going on with my device then. i’ll try again soon.
(in the end i wouldn’t even mind being without root for a few bootups inbetween, so .. i’ll flash the stock boot image and try booting android 11 then. if it works, i can try getting back root just as well afterwards i guess.)
frank93 said:
thanks. sounds about "right", your last step is basically what i’ve been doing as well previously (the "system update" never worked for me though, but i didn’t care too much). there must be something fishy going on with my device then. i’ll try again soon.
(in the end i wouldn’t even mind being without root for a few bootups inbetween, so .. i’ll flash the stock boot image and try booting android 11 then. if it works, i can try getting back root just as well afterwards i guess.)
Click to expand...
Click to collapse
Yeah, note that I never flashed full rom image. I went using standard system update from settings. In the end it was only patched boot.img I flashed.
okay, apparently not even a "real" firmware update (using the original stock boot image) works for me. loops back to bootloader 2-3 seconds after the google-logo. so i guess there’s something else wrong with my device/system.
i’ve "updated" back to the latest/last android 10 for now (there the firmware upgrade/downgrade works!?), and i’ll scratch my head another time i think. thanks for your input though!
i5lee8bit said:
and @Ghisy, I'll send you some more details when I get a chance, certainly well before the weekend. Though if it's any consolation, in total the actual updating process only took me about an hour, if not less! Probably took me more time to actually download the files and prep, lol. XD
Click to expand...
Click to collapse
Thanks, I appreciate it! You took one for the team and shared interesting info too! *(air) high five*
C3C076 said:
Thanks. Your support is very much appreciated. Too kind. Interesting find about volume key cursor control. As you can see in the 2nd post I listed it there as currently not working . Looks like I'll have to take a look again. Do you use whitelist (App list mode enabled in EdXposed settings) ?
Click to expand...
Click to collapse
I use App List mode, but not White List mode, as I use the Pass SafetyNet option (so basically on Blacklist mode). Because I also have GPay working and all (I've linked to that thread before, it's the one I linked with my list of active modules). Hahaha, I didn't even realize you put in the 2nd post about it not working - weird! Definitely working for me though, using these current configurations.
frank93 said:
would you mind sharing your upgrade procedure from android 10 to 11 though? i’m not sure why, but my "usual" procedure (using the complete firmware, patching the boot.img, flashing everything including that boot-image afterwards) fails with all of the android 11 images. :/
(feel free to directmessage if you think it’s off topic here of course.)
Click to expand...
Click to collapse
Since I'm sure others may find it useful, I'll post it here. Also, @C3C076 may find it useful to follow this concept, assuming things are similar for Pixel 3a (I've been a long time HTC user, up til U12+ and only then switched to Pixel phones, 4 for wife and 4 XL for me to be exact).
My firmware update procedure is basically predicated on restoring the stock boot and dtbo (dtbo in case custom kernel flashed) images for your current build, which restores the stock firmware (and therefore recovery) and "unroots" / stock-ifies the phone without removing any of your Magisk or EdXposed configs, which allows you to simply boot into recovery and apply (sideload) OTA zip from stock recovery. Before booting back into system after OTA flash, reboot back into bootloader and flash the new build's Magisk-patched boot image, and when you boot up into system, voila, seamless, intuitive, and relatively safe update to new firmware version. Worst case scenario, if you bootloop you just flash the stock boot image (or even better, a modified Magisk Core Only boot image) and fix whatever is causing the problem.
Here is a link to my guide for September 2020 build, which was the first Android 11 build. There's a bunch of additional notes due to the major update at the time, though some of the info is a bit outdated. I assumed everyone at the time was on a very specific versions of firmware, Magisk, EdXposed, and even modules, etc. But if you read, especially the 2nd post, you can certainly understand how it all works and how we could apply the process from any firmware version. Here's the thread: https://forum.xda-developers.com/t/...0-009-coral-magisk-stock-boot-images.4160787/
- I recommend giving the procedure a read, as you should be able to understand the intuition behind the process I use.
As we're already (assuming) on latest Magisk, Magisk Manager, EdXposed, Riru, etc. etc, we don't need to worry as much about compatibility of our installed modules before OTA'ing. So basically, I condensed down what needs to be disabled, in my case, to the old GravityBox module (obviously), and the old Kirisakura (my kernel on Q) kernel helper Magisk module. You would also want to disable any modules, Magisk and EdXposed, that may not be compatible with [R] yet.
So here was my update procedure, from here on, coming from August 2020 build already on Magisk 21.2 and up to date EdXposed / Riru / etc. modules - SPECIFICALLY FOR PIXEL 4 XL "CORAL"
(OPEN THE "SPOILER" TO VIEW!):
Spoiler: Pixel 4 XL (and by extension and intuition, hopefully other Pixel series) keep-root / updating guide-procedures
NOTE: The files I provide are specifically only for Pixel 4 XL!! You will need to obtain the correct files for your own device to follow this procedure, but the same idea should be able to be applied!
First, I downloaded the boot and dtbo file(s) for Aug. 2020 thru Dec. 2020 builds. Here's a link to my AFH uploads for these files: P4XL Boot / DTBO files
Then, I patched each month's boot image with Magisk 21.2, and put them to the side.
There's only stock dtbo.img for 08-2020 because dtbo will remain stock throughout the updating procedure, fyi.
Actually, hell, for Pixel 4 XL "Coral" users, to make your life extremely easy, I've uploaded all the files you'll need to follow this here!! - LINK HERE
And OTA files from Google servers: LINK#2 HERE
Disabled GravityBox [Q] module in EdXposed Manager / Uninstall GravityBox [Q]
(Don't bother installing GravityBox [R] yet)
Disabled Kirisakura AK3 Kernel Helper module in Magisk Manager
(you'll also want to disable any modules that potentially may not work with [R])
-- Reboot once to finalize disabling the modules --
(Don't boot back into system until this section is done, to ensure all root, settings, mods, etc. are retained - this is basically the 2nd post of the September guide I linked earlier)
- Reboot into Bootloader mode -
fastboot flash boot 08-boot.img
fastboot flash dtbo 08-dtbo.img
(these steps revert recovery to stock)
- Reboot into Recovery mode-
(when No Command / Android icon shows up, hold power button and tap volume up to get to recovery menu)
Choose option: Apply update from ADB
adb sideload (09-2020 OTA zip).zip
after OTA zip flash completes, REBOOT BACK TO BOOTLOADER
fastboot flash boot 09-patched.img
- NOW REBOOT INTO SYSTEM! -
When your phone boots back into Android (11), you will be rooted, with all mods and settings retained. And if you passed SafetyNet before with the right combination of mods and settings, it should still pass now. While you can, I wouldn't yet bother installing GravityBox [R] quite yet. Let's first continue to incrementally upgrade until we're at 12-2020 (or 01-2021 depending on when you're reading this). Basically, just make sure the Android System Update notification (sorry, I don't remember exactly the notification label, but you'll know when you see it) indicates the update completed before proceding.
Now we just repeat my OTA update procedure again, except no need to flash stock dtbo images, as we're not doing anything (like flashing custom kernel) in this short amount of time that modifies the dtbo partition.
Reboot into bootloader mode
fastboot flash boot 09-boot.img
Reboot into recovery mode
Apply update from ADB
adb sideload (10-2020 OTA zip).zip
Reboot to bootloader
fastboot flash boot 10-patched.img
Boot to system
Allow time for the system update notification to indicate update was completed.
Reboot into bootloader mode
fastboot flash boot 10-boot.img
Reboot into recovery mode
Apply update from ADB
adb sideload (11-2020 OTA zip).zip
Reboot to bootloader
fastboot flash boot 11-patched.img
Boot to system
Allow time for the system update notification to indicate update was completed.
Reboot into bootloader mode
fastboot flash boot 11-boot.img
Reboot into recovery mode
Apply update from ADB
adb sideload (12-2020 OTA zip).zip
Reboot to bootloader
fastboot flash boot 12-patched.img
Boot to system
EDIT: Google released January 2021 firmware update, literally minutes after (or maybe while??) I was posting this! Here is my January 2021 easy update guide for Pixel 4 XL: https://forum.xda-developers.com/t/...5-003-coral-magisk-stock-boot-images.4213263/
Allow time for the system update notification to indicate update was completed.
Install GravityBox [R], activate module, reboot one more time, have fun!!
Also install custom kernel or whatever else you might need to do as well.
To be honest, I kinda rushed this post, so I'll re-read it later and make sure I didn't make any little mistakes. But hopefully if you read my guides threads and stuff (like, actually read it), the entire concept should be very clear and intuitive to you! Assuming other Pixel phones (at least AB Pixel devices) have similar partitioning schemes, this should be very useful knowledge to have, as it makes updating to new firmware versions incredibly easy and low risk. Good luck, I hope this huge post helps some people / makes a better day for someone! =)
EDIT: @frank93, seeing your linked post, I see you have a Pixel 4a. Unfortunately you obviously can't use the exact files I provided / linked, but you should still be able to follow the same procedure. Just grab the OTA's, plus the full factory images, pull the necessary boot and dtbo files from the factory images, and Magisk patch the boot images for each month, and name / organize all the files and put them aside on your computer. You should still be able to follow my procedure, but with your files. I hope it works for you with no problems if you decide to try it!
Has anyone tried one plus 8t?
...aaaand Pixel January 2021 update just dropped
Awesome! 2021 is looking good! Donation sent! Keep up the awesome work bro! Working flawlessly on my Pixel 3xl