My H96 Max X2 (S905X2) cannot be upgraded, how can i unbrick? - Android Stick & Console AMLogic based Computers

After some months of use , one day i turned on my android box and suddenly after loading it will give a black screen and there is nothing else after that, i tried to reinstall firmware through a SD card but it stuck in the installing/loading with a "x" on the android green man.
Now i would like to ask for a help from someone that is familiar with unbricking, i'll provide pictures of my H96 so you can see it from inside and tell me HOW CAN I SHORT CUT or whatever i need to do. (because i saw different hardware and different devices)
May i use 9.0 android version?
This is my android box:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope the pictures of my android box will help you so you can guide me in the process of unbricking and about the short cut where should i press.

Short the following 2 pins. Good Luck.

ath156 said:
Short the following 2 pins. Good Luck.
Click to expand...
Click to collapse
I got a partition error... i tried almost every firmware... what could be the problem?

argosc said:
I got a partition error... i tried almost every firmware... what could be the problem?
Click to expand...
Click to collapse
Download the correct firmware from here:https://www.h96tvbox.com/content/6-Firmware-upgrade
Probably you have LPDDR3 memory so ONLY this firmware is suitable for your TVbox. If you had 8DDR3 type of memory you could use both firmwares (those for 8DDR3 & LPDDR3).
Also please describe how you exactly are using USB Burning Tool and the short pins method (the whole sequence).

ath156 said:
Download the correct firmware from here:https://www.h96tvbox.com/content/6-Firmware-upgrade
Probably you have LPDDR3 memory so ONLY this firmware is suitable for your TVbox. If you had 8DDR3 type of memory you could use both firmwares (those for 8DDR3 & LPDDR3).
Also please describe how you exactly are using USB Burning Tool and the short pins method (the whole sequence).
Click to expand...
Click to collapse
Actually i don't use short pins, because when i connect my h96 to the PC via the USB cable it automatically gives a connection success, so i just use some firmware, i used the firmware from the official site, but still doesnt work , it always get stuck at 9%.

argosc said:
Actually i don't use short pins, because when i connect my h96 to the PC via the USB cable it automatically gives a connection success, so i just use some firmware, i used the firmware from the official site, but still doesnt work , it always get stuck at 9%.
View attachment 5246915
Click to expand...
Click to collapse
1. Did you try the official Android 9.0 version (stock firmware) for the LPDDR3 memory as I told you above?
It is this version https://drive.google.com/drive/folders/16qCsIFbGDSgopwJ3zEBQ4iLC_wLEbLVV
So did you try this version?
2. If after trying number (1) your TVbox is not brought to life, this means that it is hard bricked and your best option is the "short pin" method.

ath156 said:
1. Did you try the official Android 9.0 version (stock firmware) for the LPDDR3 memory as I told you above?
It is this version https://drive.google.com/drive/folders/16qCsIFbGDSgopwJ3zEBQ4iLC_wLEbLVV
So did you try this version?
2. If after trying number (1) your TVbox is not brought to life, this means that it is hard bricked and your best option is the "short pin" method.
Click to expand...
Click to collapse
I have the same problem and the same box.... did you manage to solve it?
the stock firmware links are down

Related

Bricked my honor 9

I did already unlocked bootloader and flashed twrp then i tried to install gapps and something went wrong.
Now when i start my phone it just says "google" like two second and then goes to erecovery.
I have no idead what i should do.
Is my phone completely dead?
Nop.
I'm guessing your are with a chinese honor 9 on a chinese firmware, which one ?
Im from finland so i should have eu firmware right?
Lare332 said:
Im from finland so i should have eu firmware right?
Click to expand...
Click to collapse
Depending where and whoyou buy it from you could have a not european version rebranded or not to european version.
You're stating : 'then i tried to install gapps' : There was no google playstore already on your phone ?
I also rooted my phone with magisk so the stock play store didint work so i tried to install gapps.
And i bought my phone local shop in finland
Lare332 said:
I also rooted my phone with magisk so the stock play store didint[ worked/QUOTE]You had to use magiskhide on playsore app.
So we're guessing you were on firmware STF-L09C432B36x.
Just use HuRUpdater to flash one of those.
Click to expand...
Click to collapse
I cant find the correct files and also dont understand how the updater works.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279/ i dont understand these instructions.
It says "Put files you want to flash in a seperate folder on sdcard." does it mean microsdcard or what?
Yes it does.
(Alternatively, you could replace your microSD by a USB flash drive plugged in phone's USB).
So there is no way to flash them without microsdcard? Am i right
So i think i found the right files but witch one should i use STF-L09Shw or STF-L09hw what the difference is?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lare332 said:
So there is no way to flash them without microsdcard? Am i right
Click to expand...
Click to collapse
You're wrong, you could replave microSD by a USB flash drive plugged in phone's USB
Lare332 said:
So i think i found the right files but witch one should i use STF-L09Shw or STF-L09hw what the difference is?
Click to expand...
Click to collapse
STF-L09S is the 'unreleased' honor 9 premium with 6GB Ram.
I tried to flash the firmware via huru updater but it didint work i just get and error message that something went wrong
It didint work.
I tried to flash the firmware via huru updater but i just get error message that say something went wrong.
Without your twrp's recovery.log it will hard to know what happened... please share it.
My crystal ball's powers are sometimes kind of limited, but I'll try asking :
-Did you try with a FullOTA-MF firmware ? which one ?
-Did you renamed 2 of the 3 firmware's files like asked ?
-Did you used twrp 0.3 ?
-Did you used HuRUpdater 0.3 ?
Yeah i did all those thing but i managed to get my phone up and runing by using files from this thread https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
Thank you for you time, i appreciate your help.
Oh, so you were still on nougat STF-L09C432B1xx.
Yeah. I just want this thing to run atleast for now.

Question about MT6582 (N9006) and internal storage

Hello,
First of all i hope I'm in the right category, sorry If I'm wrong.
So, i have a question about this tablet. It has a really low internal storage that it uses (2GB) and on the other hand it has phone storage total space of (29.68GB). It's a MTK6582 from AliExpress (China) and the MTK Droid Tools says that: "MT6572 (MT6582 is Fake!)". So my question is can any partitioning be done to improve the size of internal memory or it's just simply fake? I'll attach some screenshots with this tablets information.
Thank you for reading and i hope you can help me out.
Thanks!
https://ibb.co/qJH9qCS
https://ibb.co/xq0JwD6
https://ibb.co/fYrDQdT
https://ibb.co/LrZMZs0
https://ibb.co/gVKwcPH
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone?
I tried to at least return the tablet to factory settings to speed it up a bit, then i did a wipe of EMMC and after emmc wipe the tablet boots to chinese language and a message that com.android.settings has stopped working, it's constant and i cannot do anything else... What happened to it?
Milos00 said:
I tried to at least return the tablet to factory settings to speed it up a bit, then i did a wipe of EMMC and after emmc wipe the tablet boots to chinese language and a message that com.android.settings has stopped working, it's constant and i cannot do anything else... What happened to it?
Click to expand...
Click to collapse
Try to flash original firmware again
amirizad_7436 said:
Try to flash original firmware again
Click to expand...
Click to collapse
I did backup everything with MTK Droid Tools before i thought about doing anything... Are all the files that i need in that backup? Can you direct me to a guide on how to do that, because MTK says "MT6572 (MT6582 is Fake!)- ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone! " which confuses me.
Milos00 said:
I did backup everything with MTK Droid Tools before i thought about doing anything... Are all the files that i need in that backup? Can you direct me to a guide on how to do that, because MTK says "MT6572 (MT6582 is Fake!)- ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone! " which confuses me.
Click to expand...
Click to collapse
No I don't mean backup
Download orginal firmware and flash it
I'm a bit of a newbie when it comes to these things, can you help me choose a firmware based on those pictures?
Edit: Found this, is this good? https://firmwarefile.com/samsung-galaxy-tab-n9106-clone
Mine is D101_MB_V4.0 2014-09-26 and this one is D101_MB_V3.0 2014-09-30, does the difference in version matter? Cannot seem to find the correct one.
Milos00 said:
I'm a bit of a newbie when it comes to these things, can you help me choose a firmware based on those pictures?
Edit: Found this, is this good? https://firmwarefile.com/samsung-galaxy-tab-n9106-clone
Mine is D101_MB_V4.0 2014-09-26 and this one is D101_MB_V3.0 2014-09-30, does the difference in version matter? Cannot seem to find the correct one.
Click to expand...
Click to collapse
I really don't understand sorry
But you should use the latest one
amirizad_7436 said:
I really don't understand sorry
But you should use the latest one
Click to expand...
Click to collapse
On the motherboard of the tablet that i have it says: D101_MB_V4.0 2014-09-26 but the one that i linked is for the version 3.0, should i try to do it or maybe use something else like this https://www.needrom.com/download/n9106d101-mtk6572-10-inch/ ?
I'm looking for help finding the link for D101_MB_V4.0 2014-09-26 or confirmation if the one of those two that i linked would work?
This one says in description it can be used for both D101 V2.0 & V4.0 but I'm not sure. https://www.needrom.com/download/n9106d101-mtk6572-10-inch/

S905W t95s1-aml-20180824 mxq mini stuck on boot logo

Hello people,
i hope the model is on the right thread.
Im Daniele from italy. I have this box and is stuck on logo android. I try to reset it or change the power supply. But not fix.
I read something about to flash the firmware (two methods) can you explain me and give me the right FW?
here you can see the picture of mainboard.
https://photos.app.goo.gl/R2V2zKzBdcQiHq6u6
https://photos.app.goo.gl/7Z69DR6dfbxZt4oR8
Yiu can try my custom android TV 9.0 Rom for s905w devices, based on official mi box firmware so is fast and stable l https://aidansrom.wordpress.com
Thanks for reply. Are you sure your FW is compatible? How can understand if is compatible. Is not better flash original FW?
Benz83 said:
Thanks for reply. Are you sure your FW is compatible? How can understand if is compatible. Is not better flash original FW?
Click to expand...
Click to collapse
there is no 100% Sure Way to know if its deffinatley compatible, with amlogic chips (like the s905w) can usally install each others firmware as long as the Chip matches (s905w roms on s905w chips) they will usally all boot up but things like wifi, bluetooth & IR Remote may not work so then its would be a case of try another rom, I have 4 versions for s905w with diffrent wifi & remote configurations so it's a case of try them and see what works for you, and i will still be releasing updates with more wifi chips ect soon, if you work with me no doubt we can get thing up and running well for you
ok man, you convinced me. i downloaded 3. [S905W] [UNTESTED] [w03] Aidan's Custom ROM [v3]
i will let you know
Benz83 said:
ok man, you convinced me. i downloaded 3. [S905W] [UNTESTED] [w03] Aidan's Custom ROM [v3]
i will let you know
Click to expand...
Click to collapse
Good Luck
V4 Uploading Now As Well With NTFS USB HDD/Stick Fix if this is something important to you & Also V3 will now say there is an update available, You Will Have To Download my v4 Manually To Update (Baisically its trying to install the Official Mi Box S Update But Because We Are Not Running On Official Mi Box Hardware The Update Will Fail) Once I Know a New Version For The Mi Box is Released I Can Download It From My Device And Modify it To Run On Our Devices, i Aim To Update To The Latest Mi Box Firmware Within a Week Of The Update Being available For Official Mi Box Devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Benz83 said:
View attachment 5159317
Click to expand...
Click to collapse
V4 Uploaded, There Are 4 Versions to try
https://drive.google.com/drive/folders/13k5wx9zqHRV_7R5kfwHcLxPdb1cYMC1U?usp=sharing
Maybe its me or maybe something strange. I try to use the last version, so i installed the usb burning tool 3.1, after check image open the version 2.1.8.
I uninstall the old version.
However, i try several fw, also others find on web, same error
It happened to me when flashing tanix tx9s.
I think the tool checks the img file and determines whether to use the latest or an older version.
The flashing went fine for me.
Benz83 said:
Maybe its me or maybe something strange. I try to use the last version, so i installed the usb burning tool 3.1, after check image open the version 2.1.8.
I uninstall the old version.
However, i try several fw, also others find on web, same error
Click to expand...
Click to collapse
Try these Stock Roms
https://drive.google.com/file/d/1Q3vsCniqs-Aq7fiFz8LQ3aBbyYdIOsm4/view
https://drive.google.com/file/d/1fea3eqLRzG42ydB1DC9DjlbgDKnBISW1/view
thanks a lot, but nothing to do. Other solution?
A method to reset nand flash? i saw something about pinout

[HELP] MSMTool for OnePlus 7T Pro HD1913?

Hey, so my device is unanble to boot and the only solution possible is using MSM but I didn´t find a version for 7T Pro only 7Pro, 7T and 8Pro.
Is there a possibilty to use the MSM tool with the software provided by oneplus website or is there are MSMTool for 7T Pro. I read many forums but didn´t find something there. Please help if you can
nikiwithstyle said:
Hey, so my device is unanble to boot and the only solution possible is using MSM but I didn´t find a version for 7T Pro only 7Pro, 7T and 8Pro.
Is there a possibilty to use the MSM tool with the software provided by oneplus website or is there are MSMTool for 7T Pro. I read many forums but didn´t find something there. Please help if you can
Click to expand...
Click to collapse
This thread should help. Just use the BA version if you need the EU firmware. I used it on my 7T Pro HD1910 (AA firmware) the other day downgrading from OOS 11 and it worked fine.
Hello I m Try TO Flash But Show Error
any have solution please suggestion
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
___kuldeepsharma said:
Hello I m Try TO Flash But Show Error
any have solution please suggestion
View attachment 5361211
Click to expand...
Click to collapse
Entering EDL mode can be tricky if you've never done it. Two ways that I know of:
First using button combo:
1. Power off phone with USB cable disconnected from PC
2. Hold Power UP + Power Down and plug in USB cable
3. Nothing shows up on the phone screen, but the MSM Downloader's Status of Connection should change to "CONNECTED". This is also assuming you have the correct drivers installed.
3b. EDL mode is short lived, so if you don't press Start in time, you will miss it.
Second using adb:
adb reboot edl
Personally, I've only used the button combo and it works.
Hw4ng3r said:
Entering EDL mode can be tricky if you've never done it. Two ways that I know of:
First using button combo:
1. Power off phone with USB cable disconnected from PC
2. Hold Power UP + Power Down and plug in USB cable
3. Nothing shows up on the phone screen, but the MSM Downloader's Status of Connection should change to "CONNECTED". This is also assuming you have the correct drivers installed.
3b. EDL mode is short lived, so if you don't press Start in time, you will miss it.
Second using adb:
adb reboot edl
Personally, I've only used the button combo and it works.
Click to expand...
Click to collapse
Thank you very much for telling me but I have lived everything still it has been there and this is not an Indian phone this is a dense country phone is there any other solution for this
i think the file is wrong can you give me the correct file

			
				
___kuldeepsharma said:
Thank you very much for telling me but I have lived everything still it has been there and this is not an Indian phone this is a dense country phone is there any other solution for this
i think the file is wrong can you give me the correct file
Click to expand...
Click to collapse
MSM downloader is in the link in second post of this thread.

TWRP on Moto G7 XT1965-T Plus Issue | Dying at Boot Image

The device is a Moto G7 Plus with a freshly unlocked bootloader and running on off of a "fastboot boot twrp-3.6.0_9-0-lake.img" which appears to be the latest from twrp.me
See screenshot image and recovery.log attached
Any help would be greatly appreciated as I've not been able to come up with a solution.
Thank you!
Samson
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could it be an issue with the new twrp build? Have you tried booting and flashing the older 3.5.2 version?
Teo S. said:
Could it be an issue with the new twrp build? Have you tried booting and flashing the older 3.5.2 version?
Click to expand...
Click to collapse
Hey Teo, oddly enough, TWRP flashed successfully despite the error message. I guess the error message has something to do with A/B slot conditions which I'm still not totally understanding. I know that the Moto G7 (not the plus) requires some copy-partitions-AB.zip according to an install guide that I'm using. Again, is good to go, unfortunately I hard bricked after flashing Lineage 18. I was told that I needed latest OTA for the device which I thought was already on there. I connected the device to wifi and tried to run update just before flashing TWRP but updates failed to download. So for now, I'm just another "Brick in the Wall" lol. Noob level 5000, sucks.
The G7 plus also requires a copy-partiosions-AB.zip to prevent bricking from different software on the 2 slots. It can be found somewhere here on the forum. Also there is a way to flash the latest OTA manually via fastboot. A guide can also be found somewhere here on the forum. You can download the OTA images from lolinet (https://mirrors.lolinet.com/firmware/moto/lake/official/RETEU/).
Teo S. said:
The G7 plus also requires a copy-partiosions-AB.zip to prevent bricking from different software on the 2 slots. It can be found somewhere here on the forum. Also there is a way to flash the latest OTA manually via fastboot. A guide can also be found somewhere here on the forum. You can download the OTA images from lolinet (https://mirrors.lolinet.com/firmware/moto/lake/official/RETEU/).
Click to expand...
Click to collapse
Thanks again Teo. Question : is there a way to unbrick the device if it won't even power up? I've tried every key combo that I could find but can't even get a charging status when I connect it to power. I think it's now certifiably hard bricked. Dunno
TallDarknSamson said:
Thanks again Teo. Question : is there a way to unbrick the device if it won't even power up? I've tried every key combo that I could find but can't even get a charging status when I connect it to power. I think it's now certifiably hard bricked. Dunno
Click to expand...
Click to collapse
Are you using the cable/charger it came with?
Have you tested with a different cable?
jockovonred said:
Are you using the cable/charger it came with?
Have you tested with a different cable?
Click to expand...
Click to collapse
factory cable / charger only, no other cables. I sent the device to a dev for kicks, see if he can un-brick it. Not holding my breath though. Stat tuned . .

Categories

Resources