TWRP 3.5.0 One UI 3.1 for Samsung Galaxy A50 Android 11. How to Root Samsung Galaxy A50 Android 11 with TWRP 3.5.0 + Magisk. The TWRP Recovery support Galaxy A50 One UI 3.1 Android 11 firmware. It may be works for SM-A505F, SM-A505FN, SM-A505G, SM-A505GN. The TWRP 3.5.0 comes with Magisk Patched. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
LET ME KNOW IF IT WORKS FOR:
SM-A505FN, SM-A505G, SM-A505GN
Manual Instructions for Flashing and Rooting
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP as AP in ODIN, then click start.
DO NOT SKIP THIS STEP! Don't remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Appears.
Format data
Install multidisabler-samsung-2.6.zip
Reboot to Recovery
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Connect Phone to Internet
Install Magisk-v22.0.apk and Open it. Magisk will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
Video Instructions - Details
Download
TWRP 3.5.0 A11
Magisk22 app
Thanks to:
@neel0210 for Kernel Source
@Enzoaquino for OrangeFox
Good work
Thanks for twrp
Thank you
Flashing this @ A505GN. Hope it works
The twrp works but the multi disabler didn't work
This is a505gn
I reverted back to 3.4 because I encountered an issue. I'm stuck in bootloop, cannot access twrp nor download mode. Had to remove the back of my phone and unplug the ribbon connecting the battery to the phone just to power it off.
I already flashed the twrp via Odin but when I installed Magick on the phone this came up. Did I done something wrong?
q1pa said:
I already flashed the twrp via Odin but when I installed Magick on the phone this came up. Did I done something wrong?
Click to expand...
Click to collapse
it happens to me sometimes
just rebbot to revocery in twrp
Thank you @redymedan for the recovery. I'm glad to say that
your "how to android" channel is great.
I have a question Please clarify the following.
In this recovery Can we update magisk to latest? (When it released)
Sharath Mane said:
Thank you @redymedan for the recovery. I'm glad to say that
your "how to android" channel is great.
I have a question Please clarify the following.
In this recovery Can we update magisk to latest? (When it released)
Click to expand...
Click to collapse
Yes, you can update it from magisk apps
It worked!
I had to run a patched AP first for magisk to work
Im on a A505G/DS
It worked just fine on my A505FN! Thanks!
Worked perfectly on A505W !
Had to use Multidisabler 3.1 instead.
I have an A505FN and I'm not able to root it with Magisk. If I try to install the linked TWRP_v3.5.0_A505_A11_Magisk.tar with Odin, then I can't reboot into Recovery afterwards - instead the Download-Mode appears again.
With RR-TWRP_v3.4.0_A505_CUBC_OneUI.tar from another Thread, it's possible to start into TWRP after flashing it with Odin. But if I boot into System (LOS 18.1) and start the already preinstalled Magisk, Magisk updates itself and after restart of Magisk I can try to install Magisk and in the first screen "Recovery Mode" is checked. If I click on "Next step", the Option "Recovery Mode" disappears and I can choose a file to patch.
I don't know where I'm wrong.
IngolfN said:
I have an A505FN and I'm not able to root it with Magisk. If I try to install the linked TWRP_v3.5.0_A505_A11_Magisk.tar with Odin, then I can't reboot into Recovery afterwards - instead the Download-Mode appears again.
With RR-TWRP_v3.4.0_A505_CUBC_OneUI.tar from another Thread, it's possible to start into TWRP after flashing it with Odin. But if I boot into System (LOS 18.1) and start the already preinstalled Magisk, Magisk updates itself and after restart of Magisk I can try to install Magisk and in the first screen "Recovery Mode" is checked. If I click on "Next step", the Option "Recovery Mode" disappears and I can choose a file to patch.
I don't know where I'm wrong.
Click to expand...
Click to collapse
Flash stock rom with odin
Reboot. Do not login to google. Check oem grayed out.
Reboot to download mode
Select 3.5.0 twrp as ap. (You should Untick autorestart in options) . Start.
By connecting cable reboot into recovery by using button combo. Do not reboot to system. Do not remove cable.
After entering twrp.
Format data. Next flash multidisabler.
Now select reboot to recovery.
Wait for few minutes, if doesn't boot,force restart by using volume down and power buttons. It will bootup.
You can finish ur setup now.
You can flash other roms . To enter twrp you need to connect cable with pc and use buttons.
Thank you Sharath Mane,
I followed your steps again and I was able to install Magisk successfully in the Stock-Android
In the next step, I booted in TWRP again and
- Format Data
- Fomat Dalvik, Cache, System
- flashed Unofficial LOS 18.1 as System Image
after booting into System I started Magisk and after Download and Install there is - *no Magisk installed* - only the App
Is there an additional step neccessary and I have missed it? Or is it not possible with LOS?
IngolfN said:
Thank you Sharath Mane,
I followed your steps again and I was able to install Magisk successfully in the Stock-Android
In the next step, I booted in TWRP again and
- Format Data
- Fomat Dalvik, Cache, System
- flashed Unofficial LOS 18.1 as System Image
after booting into System I started Magisk and after Download and Install there is - *no Magisk installed* - only the App
Is there an additional step neccessary and I have missed it? Or is it not possible with LOS?
Click to expand...
Click to collapse
you will edit your ini.environ.rc
watch it in youtube
IngolfN said:
Thank you Sharath Mane,
I followed your steps again and I was able to install Magisk successfully in the Stock-Android
In the next step, I booted in TWRP again and
- Format Data
- Fomat Dalvik, Cache, System
- flashed Unofficial LOS 18.1 as System Image
after booting into System I started Magisk and after Download and Install there is - *no Magisk installed* - only the App
Is there an additional step neccessary and I have missed it? Or is it not possible with LOS?
Click to expand...
Click to collapse
Goto twrp and select reboot recovery
Related
After updating my J5 2017 J530F to the latest Oreo 8.1 I was having trouble getting root and all things working again.
Hours of waiting for installs then something going wrong after applying the CF-Auto-root or trying to install Magisk or something and having to install again, Hours spent waiting..
Trying to install the auto-root would cause a verification error and force a system erase but not work again.
Thought i'd found the solution with the EDOs rom but then realised I had no bluetooth and had problems with mobile data.
After many efforts i found a way by simply installing the excellent Helios PRO kernel and manually installing Magisk after.
So I offer you the way i found to root my phone with Stock Oreo 8.1
A step by step breakdown of the method I used to fully root the fresh stock rom install.
First download the needed stuff
Latest Samsung Odin software. (3.13)
https://samsungodin.com/download
Download Link:
https://samsungodin.com/download/Odin3_v3.13.1.zip
USB Drivers.
https://samsungodin.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar
New Oreo 8.1 Stock ROM
https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/
Download Link: https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/download/J530FXXU3BRL1/252803
TWRP
https://github.com/TwrpBuilder/andr...s/tag/TWRP-3.2.3-TwrpBuilder-2018-09-13_15-34
Download Link: https://github.com/TwrpBuilder/andr...2.3-TwrpBuilder-j5y17lte-2018-09-13_15-34.tar
The Helios Pro Kernel
https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
Note if you are not installing from fresh stock roms Helios kernel says...
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Magisk , (All J5 roms kernels i installed that said they had magisk pre-installed never actually worked on my phone)
so I downloaded the files to manually install Magisk.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I used the main zip file and the manager apk
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
Note: developer mode and OEM unlocking need to be enabled for most of these steps but many of the steps undo the settings so will need to be reapllied at various stages.
enable developer mode on phone by going to Settings/About phone/Software settings and keep pressing "Build Number" till developer mode activates then go back to main settings page and select "Developer Options" and make sure developer mode is enabled and USB debugging (i guess) and "OEM Unlock"
Method...
1. unpack Odin software and right click Launcher icon and select properties
Go to Compatibility settings and select Vista (service pack 2) compatibility.
Click okay and launch the Odin program.
2. Install stock ROM
Unpack the Oreo 8.1 files and use the buttons in Odin to load the BL , AP, CP and CSC files into each slot
Put phone into "Download Mode" by powering off and holding volume down - , home, and power buttons together till the screen pops up telling you to now press volume up to go to download mode.
Then plug in USB to computer.
Odin should report "Added" if you have correct samsung drivers on PC.
Then press "Start" in Odin.
Stock roms should all download to phone then it reboots.
3. Flash TWRP
Boot up phone, log into an account and get it all running then enable developer mode again.
Once set copy the Helios pro kernel zip file and the magisk zip and apk files to the phones SD card.
Now power down the phone and put it in download mode again.
Load Odin again and now put only the TWRP installer .tar file into the "AP" slot then select the "Options" tab in Odin and uncheck the auto reboot option. then hit start and flash twrp.
Load TWRP an install helios kernel
After flashing TWRP hold down the phones volume-down, home and power buttons and as soon as the screen goes blank immediately change volume down for volume up while still holding home and power.
then TWRP should load
Go to Wipe and select "Format Data" type yes to proceed , then back to wipe, select advanced wipe and wipe internal storage.
then back to TWRP main page and select "Install", select micro-sd card and point installer to the Helios Kernel zip file and install.
Install Magisk Manager app:
After booting up i still had no root so i installed the Magisk Manager apk using the "My files" app and launching it confirmed still no Magisk installed.
(I cannot recall if i had to go through the "Enable developer mode" again at this point but check if you need to or not)
Last Step, Manually Install Magisk.
Lastly I powered down the phone and held volume up, home and power key to launch TWRP
There i selected Install and installed the Magisk.zip file from SD card.
Finally the system booted, everything was working and i had root via an installed and working Magisk
Hope this helps someone..
Thanks! Worked ! even with existing OREO rom, did not flash rom, started with 2nd step
Sammobile is down
I can't download the stock oreo software. Are there any alternatives since im trying to reset my rooted phone back to stock..
Jens956 said:
I can't download the stock oreo software. Are there any alternatives since im trying to reset my rooted phone back to stock..
Click to expand...
Click to collapse
Use magisk uninstaller package?
palmbeach05 said:
Use magisk uninstaller package?
Click to expand...
Click to collapse
Man that wont work. I installed EDOS oreo ROM. I need to get it BACK TO STOCK, without any system modifications so i can sell my old phone to someone who wants it.
Jens956 said:
Man that wont work. I installed EDOS oreo ROM. I need to get it BACK TO STOCK, without any system modifications so i can sell my old phone to someone who wants it.
Click to expand...
Click to collapse
Ok well thats a bit more detail on your phone setup, i figured you had stock and were trying to unroot.
What is sammobile saying when you go to their site?
palmbeach05 said:
Ok well thats a bit more detail on your phone setup, i figured you had stock and were trying to unroot.
What is sammobile saying when you go to their site?
Click to expand...
Click to collapse
That the free downloads are unavailable because of maintenance
Jens956 said:
That the free downloads are unavailable because of maintenance
Click to expand...
Click to collapse
Try
http://updato.com/firmware-archive-select-model/
palmbeach05 said:
Try
http://updato.com/firmware-archive-select-model/
Click to expand...
Click to collapse
Yeah im currently downloading from there i think. It takes so many hours to download a 2gb zip :/
I can intall stock oreo and twrp but when reboot logo samsung is blocked
I have problem ... So when I put twrp file into odin AP section it gives me PASS message, but problem is after doing that it deletes all files in my phones internal storage my PC shows that 10gb out of 10gb internal storage in my phone is free. twrp works fine but if I try to boot system it gives me bootloop cuz there is no OS in my phone... any Ideas how to fix or what am I doing wrong? :/
BioBonus said:
After updating my J5 2017 J530F to the latest Oreo 8.1 I was having trouble getting root and all things working again.
Hours of waiting for installs then something going wrong after applying the CF-Auto-root or trying to install Magisk or something and having to install again, Hours spent waiting..
Trying to install the auto-root would cause a verification error and force a system erase but not work again.
Thought i'd found the solution with the EDOs rom but then realised I had no bluetooth and had problems with mobile data.
After many efforts i found a way by simply installing the excellent Helios PRO kernel and manually installing Magisk after.
So I offer you the way i found to root my phone with Stock Oreo 8.1
A step by step breakdown of the method I used to fully root the fresh stock rom install.
First download the needed stuff
Latest Samsung Odin software. (3.13)
https://samsungodin.com/download
Download Link:
https://samsungodin.com/download/Odin3_v3.13.1.zip
USB Drivers.
https://samsungodin.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar
New Oreo 8.1 Stock ROM
https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/
Download Link: https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/download/J530FXXU3BRL1/252803
TWRP
https://github.com/TwrpBuilder/andr...s/tag/TWRP-3.2.3-TwrpBuilder-2018-09-13_15-34
Download Link: https://github.com/TwrpBuilder/andr...2.3-TwrpBuilder-j5y17lte-2018-09-13_15-34.tar
The Helios Pro Kernel
https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
Note if you are not installing from fresh stock roms Helios kernel says...
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Magisk , (All J5 roms kernels i installed that said they had magisk pre-installed never actually worked on my phone)
so I downloaded the files to manually install Magisk.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I used the main zip file and the manager apk
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
Note: developer mode and OEM unlocking need to be enabled for most of these steps but many of the steps undo the settings so will need to be reapllied at various stages.
enable developer mode on phone by going to Settings/About phone/Software settings and keep pressing "Build Number" till developer mode activates then go back to main settings page and select "Developer Options" and make sure developer mode is enabled and USB debugging (i guess) and "OEM Unlock"
Method...
1. unpack Odin software and right click Launcher icon and select properties
Go to Compatibility settings and select Vista (service pack 2) compatibility.
Click okay and launch the Odin program.
2. Install stock ROM
Unpack the Oreo 8.1 files and use the buttons in Odin to load the BL , AP, CP and CSC files into each slot
Put phone into "Download Mode" by powering off and holding volume down - , home, and power buttons together till the screen pops up telling you to now press volume up to go to download mode.
Then plug in USB to computer.
Odin should report "Added" if you have correct samsung drivers on PC.
Then press "Start" in Odin.
Stock roms should all download to phone then it reboots.
3. Flash TWRP
Boot up phone, log into an account and get it all running then enable developer mode again.
Once set copy the Helios pro kernel zip file and the magisk zip and apk files to the phones SD card.
Now power down the phone and put it in download mode again.
Load Odin again and now put only the TWRP installer .tar file into the "AP" slot then select the "Options" tab in Odin and uncheck the auto reboot option. then hit start and flash twrp.
Load TWRP an install helios kernel
After flashing TWRP hold down the phones volume-down, home and power buttons and as soon as the screen goes blank immediately change volume down for volume up while still holding home and power.
then TWRP should load
Go to Wipe and select "Format Data" type yes to proceed , then back to wipe, select advanced wipe and wipe internal storage.
then back to TWRP main page and select "Install", select micro-sd card and point installer to the Helios Kernel zip file and install.
Install Magisk Manager app:
After booting up i still had no root so i installed the Magisk Manager apk using the "My files" app and launching it confirmed still no Magisk installed.
(I cannot recall if i had to go through the "Enable developer mode" again at this point but check if you need to or not)
Last Step, Manually Install Magisk.
Lastly I powered down the phone and held volume up, home and power key to launch TWRP
There i selected Install and installed the Magisk.zip file from SD card.
Finally the system booted, everything was working and i had root via an installed and working Magisk
Hope this helps someone..
Click to expand...
Click to collapse
You've helped me get an old J5 2017 rooted. Cheers!! Merry Christmas!!
Rooting Samsung Galaxy M30s SM-M307F with Magisk v20.1 + Video. Magisk v20.1 works stable on SM-M307F with ASJ2 firmware and August 1, 2019 Security Path Level. Lock screen, Biometrics and security worked without any issue, there is not randoom bootloop. Follow these steps below:
1. Make sure the boot loader are unlocked ( OEM options is enabled with grey color ) unlock booloader video https://youtu.be/5juwDL0u_D4
2. Download the firmware Galaxy M30s SM-M307F that match with your region.
3. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5. Copy AP tar file and MagiskManager-v7.4.0.apk to your phone.
4. Install Magisk Manager ( MagiskManager-v7.4.0.apk ) on your phone.
5. In Magisk Manager: Install → Install → Select and Patch a File
6. Select the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar. Copy magisk_patched.tar the tar file to your PC
7. Reboot to Bootloader: Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset. Select Reboot to bootloader. Connect the phone to PC using USB Cable.
8. Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files.
Important: check “Auto Reboot” and "F. Reset time" only in Options!
9. Magisk is now successfully flashed to your device!
10. After the device is booted up, do the usual initial setup. It need more time and patient.
11. Connect the phone to Internet, Then Copy Magisk Manager apk file to your phone and install it.
12. Open Magisk Manager. It will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
13. Done! Your phone root with Magisk v20.1, Enjoy!
14. If you faced annoying OneDrive Pop-Up you can watch in the last video how to fix it
Rooting Video
Note: Rooting M30s is easy than A50s
What about recovery?
ashwin_tembhekar said:
What about recovery?
Click to expand...
Click to collapse
No body develop recovery for this model right now
You need to again wipe data after flashing magisk_patched.tar
I'm still on August security patch! Samsung wtf????
Thank you my friend it is a successful method
Everything done step by step sucessfully
No issues at all...AWESOME!
Everything done step by step sucessfully
But
Phone reboots
quite often while using...
Hritwik said:
You need to again wipe data after flashing magisk_patched.tar
Click to expand...
Click to collapse
***WHY sir???
Random reboots
Hello Team,
after rooting working smooth except of random reboots. removed root now no reboots. please help. i ant root access.
Graphic_Artist_Nik said:
But
Phone reboots
quite often while using...
Click to expand...
Click to collapse
tanweer17 said:
Hello Team,
after rooting working smooth except of random reboots. removed root now no reboots. please help. i ant root access.
Click to expand...
Click to collapse
you must clear magisk data/cache the steps:
1. Boot system without magisk
2. clear magisk data/cache ( don't run it after clear data/cache)
3. Boot system with magisk
Done!
Watch this video full video rooting M30s SM-M307F included how to fix the bootloop
https://youtu.be/Q7m_mUxQaZQ
Twrp for this phone, I don't want to flash any magisk patched rom, just needed twrp for flashing,
BootLoader Unlocking
Is BootLoader unlocking compulsory for flashing stock firmware?
I got an update notification for magisk. How to properly update magisk (not magisk manager) after it's already installed? I am afraid that it will bootloop my installation. I used magisk patched twrp method.
andreidi said:
I got an update notification for magisk. How to properly update magisk (not magisk manager) after it's already installed? I am afraid that it will bootloop my installation. I used magisk patched twrp method.
Click to expand...
Click to collapse
I suggest you to use TWRP, It was available. TWRP is safe and there is no bootloop issue. See this thread for TWRP https://forum.xda-developers.com/ga.../unofficial-twrp-3-3-1-0-galaxy-m30s-t4035019
For rooting video you can watch this video https://www.youtube.com/watch?v=7xyo0O_zuZA
I already rooted and installed twrp with magisk. But I get update norification from magisk. How to update? I have 3 options: direct install, patch a file or download zip.
help, where finishing the Odin stopped in modem or cache please help>>>
TWRP is an open source, community project. A custom recovery is used for installing custom software on your device. This TWRP has included Magisk. After a long wait, Finally, A50s can be rooted without bootloop issue using Kernel Mod. Kernel Mod based on Quantum Kernel v.1.1, edited by halcyon441 to make it works on A50s for fixing bootloop.
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty. We are here just try to help you, don't be stupid and don't blame us if you make mistake
Downloads
TWRP_3.4.0.0_A50s_Magisk.tar
QuantumKernelv1.50_A50sxx.zip
Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Copy these 2 files to micro SD Card ( Quantumkernel and disable dm_verity )
Install TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mod
3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
4. Flashing TWRP_3.4.0.0_A50s_Magisk.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
6. Install QuantumKernelv1.50_A50sxx.zip
8. Select Wipe -> Format data.
9. Install Disable_Dm-Verity_ForceEncrypt_01.14.2020.zip
10. Select Reboot to Recovery
11. Install Magisk Manager
12. Done!
For detail instructions WATCH THIS VIDEO
Contributors
halcyon441 and redymedan
Source Code TWRP : https://github.com/halcyon441-png/twrp_samsung_a50sxx
Source Code Kernel: https://github.com/halcyon441-png/android_samsung_exynos9610/releases/tag/v1.5
Created 2020-06-08
Updated 2020-07-23
First ?
great thanks mate, @redymedan & @halcyon441
After rooting, phone restart unroot again,, how to fix?
rockadz9 said:
After rooting, phone restart unroot again,, how to fix?
Click to expand...
Click to collapse
enter TWRP recovery then select Reboot to Recovery, each time you restart the phone normally, it will unroot it.
You can join to telegram group https://t.me/androidhowto2020
̶h̶e̶y̶ ̶@redymedan,̶ ̶d̶i̶d̶ ̶y̶o̶u̶ ̶c̶h̶e̶c̶k̶ ̶t̶h̶e̶ ̶c̶a̶m̶e̶r̶a̶?̶
̶i̶s̶ ̶i̶t̶ ̶w̶o̶r̶k̶i̶n̶g̶ ̶o̶r̶ ̶n̶o̶t̶?̶ ̶b̶e̶c̶a̶u̶s̶e̶ ̶m̶y̶ ̶c̶a̶m̶e̶r̶a̶ ̶i̶s̶n̶'̶t̶ ̶w̶o̶r̶k̶i̶n̶g̶ ̶a̶f̶t̶e̶r̶ ̶i̶ ̶f̶l̶a̶s̶h̶ ̶t̶h̶a̶t̶ ̶k̶e̶r̶n̶e̶l̶
[Edit]
My bad, turns out i was flashing the zip from A50, not the edited custom kernel from @redymedan gdrive
change to source code link to this please.
halcyon441 said:
change to source code link to this please.
Click to expand...
Click to collapse
Done!
Any chance for permanent root which persist after reboot?
Mikolaj.Q said:
Any chance for permanent root which persist after reboot?
Click to expand...
Click to collapse
You can try Smali Patcher and thick/select only "recovery reboot".
Did this working with SM-A5070
ba_alwy said:
Did this working with SM-A5070
Click to expand...
Click to collapse
not tested
Can I flash the the tar file without the magisk suffix and flash the latest magisk zip file?
If not, how can I make root persist after reboot with smalli patcher?
I tested and not working with A5070
The only thing it's root with magisk and the phone keep reset
Hi, tried doing this on my SM-A507FN/DS, couldnt flash TWRP, it said only official binaries can be flashed in download mode. Any solution @redymedan ?
muhsin_Sultan said:
Hi, tried doing this on my SM-A507FN/DS, couldnt flash TWRP, it said only official binaries can be flashed in download mode. Any solution @redymedan ?
Click to expand...
Click to collapse
You must unlock the bootloader, you get the error message because the bootloader are locked.
Watch this video how to unlock it Unlock Bootloader https://youtu.be/8j6WkOOA3f4
redymedan said:
You must unlock the bootloader, you get the error message because the bootloader are locked.
Watch this video how to unlock it Unlock Bootloader https://youtu.be/8j6WkOOA3f4
Click to expand...
Click to collapse
I already unlocked the bootloader. If you do it from a locked bootloader it would say not allowed due to oem lock. But I already unlocked it. I saw another thread where say to flash the AP file with Magisk then flash everything in odin except replace AP with the magisk patched one. Will that work @redymedan
Update TWRP 3.4.0.0 and Quantum Kernel v1.50
Thanks to halcyon441 for the Good Jobs :good:
sm-5070
hello,
I tested with a A50s SM-5070. TWRP is well flashed, but the phone doesn't want to reboot in recovery.
Then i flashed the stock ROM
On which version of A50s is it tested ?
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO https://youtu.be/30gFxuyiFqU
Credits and Thanks to:
@Darkcannibal and @santhoosh
redymedan said:
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO
Credits and Thanks to:
@Darkcannibal and @santhoosh
Click to expand...
Click to collapse
Nice jo3
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL
how to put twrp on my A50 , please
Jhon177 said:
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL ?
how to put twrp on my A50 , please
Click to expand...
Click to collapse
Let me know your A50 model number and region?
redymedan said:
Let me know your A50 model number and region?
Click to expand...
Click to collapse
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Jhon177 said:
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Click to expand...
Click to collapse
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
redymedan said:
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
Click to expand...
Click to collapse
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Jhon177 said:
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Click to expand...
Click to collapse
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
twrp works on Baseband: A505FXXU5BTE1.
BuildNumber: QP1A.190711.020.A505FDDS5BTF2
Thank You
redymedan said:
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
Click to expand...
Click to collapse
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
Before install multidisabler, you must format data first... I think you missed a step, please check it again
redymedan said:
Before install multidisabler, you must format data first... I think you missed a step, please check it again
Click to expand...
Click to collapse
Hi redyman , just info ??
I am suscsess for evrything about twrp on my device A50.
About multidisabler samsung.
I try direct Reboot to system
?? violaaaaaa my A50 start SETUP PHONE.
Without installing Multidisabler. And my phone runing normal nice and greattttt
Maybe on lattes firmaware no need Flash multidisabler.
Btw thank alottttts to Redymedan , for attention reply my question until sucsess flash twrp for my A50 ?? terimakasih banyakkkk bosku
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
gSingh05 said:
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
Click to expand...
Click to collapse
That is long story I think, as I am not wrong in after android 8 or 9 above, It caused partition structure. In android 8 above partition structure has changed, we can not install magisk manually in TWRP anymore, we must patch it in recovery.img, repack recovery.img, boot.img and vbmeta.img to be flashable tar file then flash it. It looks no solution until now..
HELP
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
Please show me the error message or screenshot of its... I did not face any issue when install multidisabler..
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
For me. Done. I think if you use lattest firmware / juni security patch.
No need samsung multidisabler.
On twrp
Just format data -
Swipe to factory reset
Reboot to recovery.
Install magisk manager done. ?
That my experience.
( that also true until now I am not succes to flash multidisabler ,but everything work fine without multidisabler ,
bener bro gak bisa . Tulisannya error merah saat flash zip sd card )
BOHEMIA840 said:
@redymedan
Click to expand...
Click to collapse
Not tested, I am not sure it will work.. but you can try to test it
I am using 3.3.1.3. The process is the same? even if I already have the twrp?
i'm having problem to boot in twrp it doesn't open i tried every way above and success once or twice only and after i granted su i rebooted then i lost su again
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
[Update#1]
Today I have managed to install the Android Beta 3.1 [ is beta software and I don't recommend using it as your daily os]
https://sourceforge.net/projects/nippongsi/files/Pixel%20-%20Pixel4a_SBeta3.1%20-%20TBO42ZZ8IF/Pixel4a_SBeta3.1-AB-12-20210727-nippongsi.img.gz/download
you can download the ROM file from Nippon's Sourceforge
every step is the same and you just have to change the rom as this
there's a bug that developer setting crash the settings app and it is working but it does have some lots of bugs, and screen lock is not working but I'll try to fix it and upload the method
if your device get boot looped, press Bixby + power + vol down to boot into download mode and flash the stock AP file using Odin
[I was supposed to edit the upper one but accidentally created as a reply ]
Just go to UPDATE#2
Skuld Norniern said:
Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)
Click to expand...
Click to collapse
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
thongass000 said:
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
Click to expand...
Click to collapse
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Skuld Norniern said:
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Click to expand...
Click to collapse
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
thongass000 said:
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
Click to expand...
Click to collapse
Sorry for being late!!
for me, I do have the same issue with wired audio and I have not been able to find a way to fix it yet
if I manage to fix the issue I will fix the main article
Skuld Norniern said:
Skuld Norniern said:
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
Click to expand...
Click to collapse
Hello sir i can't find havoc os 4.5 in:https://download.havoc-os.com/?dir=arm64-ab
Click to expand...
Click to collapse
After flashing twrp on my sm g885f, cant get into terp,
mine shows volume down + power to restart, not to enter turn off
how can i enter into twrp
Skuld Norniern said:
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
Click to expand...
Click to collapse
'os.img file' where
, guess i fixed it
when installing Certification_Patch.zip, it shows command error
what i found- this patch is for G885FDXS5CUL1, mine is
G885FDXU5CUG1