Tried to flash Android 10 trough odin, didnt work got stuck on download screen and just shutdow by itself, now wont turn up, charge or get detected at odin over usb, any ideas how to recover?
Same thing happened to a80 here, but I didn't buried it yet till I seen your thread . I don't think so it can be fixed seems like bricked for rip.
Related
Guide: How to fix a bricked SGSII from failed flash, no recovery & no usb recogntion
Now Fixed. - Thanks: Below is the guide to how I broke and fixed it with a little help from my XDA Friends. Maybe the MODS could sticky it as a unbrick guide to go alongside the rest?
So I was flashing a ROM through Odin as per the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1075278
The flash failed and when I restarted my phone I was left with the following:
1)No Access to Recovery Mode through Vol Up + Home + Power
2)Access to Download Mode through Vol Dwn + Home + Power
3)PC would recognise a device was connected on any USB port but kies or Odin Could not detect the phone
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
The Cure:
1)Uninistal and Re-Install Kies and Samsung Mobile Device Driver
2)Pureley by accident left my phone connected on flash screen of death through the process and on loading ODIN it connected perfectly right away
3)Set PDA to ROM and flashed.
4)Reflashed as per normal routine again due to boot loop this time in download mode.
5)Factory Reset via Recovery Mode to force CSC update to match ROM
6)*When it arrives use USB jig to re-set flash counter to 0*
Step 2 is not advised as goes against what all the instructions say, please try download mode before this method I don't know if it was just luck I didn't further mess up the phone, but to be honest bar screwing my IMEI it couldn't get much worse! And as I said I found it by accident and it worked. Don't know if anyone has an explanation. From the message on the screen and what I read on Kies ref the emergency recovery I think this is a kind of emergency download mode for when stuff goes wrong as it hints kies can fix it from this screen.
I tried to flash the 02 2.3.5 file from the carrier branded thread, followed all instructions. File was a .tar.md5 i left as is as per instructions.
the flash failed when the phone powers up i get upgrade failed, I can get to download mode but odin doesn't recognise the phone as being connected ive tried multiple usb ports
kies also wont recognise it
i cant access recovery mode
is there any way back?
ive read most of the other posts but don't seem to be getting anywhere other than fustrated!
In kies there's an option to install drivers, try that first and see if it'll find the phone again.
kies
no joy that root, the pc knows its there as every port i plug into it wants to install drivers for device and does so
Remove Samsung Kies from phone and reinstall it and try again .
jje
Cheers will report back, what i don't get is why i cant get to recovery mode would make things easier! Can a jig do this? If i try i just get the failed update screen
I also get same. Screeb when plugged into charger does thos mean its not even charging?
Sent from my X10i using Tapatalk
My god you guys are amazing! Uninstalled reinstalled kies then conected phone not in download node but on the failure screen odin connected right away and flashed perfectly its alive again thnx sooooo much
Sent from my X10i using Tapatalk
Jig ordered jig worked one reset flash count
Sent from my GT-I9100 using Tapatalk
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
cyberspaceguy said:
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
Click to expand...
Click to collapse
Service Centre .
jje
DAMN
I really wish I saw this 2 weeks ago
Its stuck in the warranty repair centre, I dont expect it to be fixed, so will try this soon when it comes back !
Lol i spent ages reading multiple posts about bricked phones nothing seemed to be working do asked, someone suggested the kies reinstall, then by accident i deviated slightly from instructions in terms of not disconnecting phone and leaving it on brick screen and it happened to work
Alot of people flame for posters asking previous questions but these guys were really helpful to me.
Ask and xda will provide
Sent from my GT-I9100 using Tapatalk
this just happened to me..luckily sprint gave me a new phone after 2 days for no charge at all..
Odin was not recognizing my phone... than I followed your instructions and unninstaled kies and samsung usb drivers.
turned usb debbuging mode ON...
turn off phone
put the phone in download mode (hold volUP, home, power)
AND WHEN I INSTALLED KIES WITH THE USB PLUGGED IN THE PHONE, WINDOWS INSTALLED THE DRIVERS AND I FLASHED THE FIRMWARE I WANNED WITH ODIN
MANNY THANKS
Glad it worked hopefully this will get sticky
Sent from my GT-I9100 using Tapatalk
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
Click to expand...
Click to collapse
On that screen, the phone is effectively in Download Mode already.
Just connect Odin and flash away, did it on my phone a lot of times already (I sometimes forcefully enable this screen manually - don't ask why - and always flashed directely from there.)
Thanks for that i didnt realise till after I'd flashed that this was still download mode, i was still in flappy panic "dude i bust my phone " mode. Still trying to find out why windows ****s up the drivers when the flash bins out
Sent from my GT-I9100 using Tapatalk
Why don't people use mobile Odin?
Sent from my GT-I9100
Hello apparently I bricked my Rom while I tried to reinstall cm 7 or 9 I cant remember from the recovery on clockwork mod I had backup done of that. But then suddenly the phone randomly decided to turn off in the middle of operation. Then the phone wont turn on and if it turns on by some miracle then It just stays at Samsung logo or PC does not recognize it by usb. So I thought that trip to service place would fix it cause i totally bricked the **** out of it lol. Anyways I got told that repair costs 95 eur and that the phone has water damage. Now keep in mind that I keep my phones in dry place and handle them with care in rainy conditions or so. So it is not had any water damage. What impresses me is that they didnt even take it apart. So now im stuck with my bricked phone again and nothing to do. So I was quessing of any specialist could tell me how could I do the unpricking by myself. (Not a noob on tech part) I can sometimes after removing battery and stuff get it in charging mode or download mode but it happens at random.
Maybe u could try soft unbrick ( I think its called so...) The program on the PC will recognize ur phone and it will unbrick ur g5:thumbup:
But please tell me: does the g5 turn on (is it showing any live?)
Sent from my GT-S5360 using xda premium
Well it depends. Sometimes it turns on sometimes it wont sometimes it will start downloading usb drivers while connected to usb and sometimes wont. It just does what it wants but when it turns on its frozen on samsung logo.
Can you get to Odin mode (Yellow triangle)? If you can, try going back to stock. You can get the firmwares at sammobiles.com. Make sure you download the correct firmware. If not working, try flashing ClockworkMod and flash a signed CyanogenMod .zip file. But my problem now, I cant go back to stock. Seems like Odin flashed the stock correctly, but Im stuck at glowing Samsung logo.
Try flashing again?
Yes! Try Odin if the yellow triangle appears. If u cannot get into download mode with button combination try an USB JIG which worked for me like a charm
Odin is the best Option
Sent from my GT-I5500 using xda premium
I reflashed the ROM from samfirmwares but I have the same problem. The phone is stuck in a boot loop after stopping and freezing for a bit at the Samsung sign
Okay. Now when you turn on your phone normally (power button), youll see the glowing samsung logo over and over again right. And it seems to go on until battery empty (I think). Try flashing ClockworkMod instead and see if it boots ClockworkMod. I revived my phone this way, but not able to get to stock.
why don't you go to you're local service?
A couple days ago, within an hour of using my phone and everything seeming to be fine, my phone got stuck at the Galaxy Note II logo. Thinking that it locked up and reset itself or something like that while in my pocket, I pulled the battery because it didn't respond to the power button. after I replaced the battery and turned it on, it stopped at the same screen. After a few attempts, I tried to get into recovery mode and it only got to the download screen. After some research, it sounded like I could maybe flash the stock rom onto the phone and get back up and running. so I downloaded ODIN and found what I thought was the correct ROM and tried to flash it. ODIN gave an error about unable to find a PIT file, so more googleing later, I found a PIT file and tried again. ODIN tried for about 10 minutes and then failed. My phone was still on the download screen so I thought to just try the process completely from the start again. I unplugged my phone from the computer and tried to restart it, I think by holding the power button down but I may have just pulled the battery. once my phone turned off it hasn't turned back on again. It wont even attempt to charge when I plug it into the wall.
So I ask the people who are far more experienced with this kind of thing, did I unrecoverably mess up my phone, or is there something I can still do?
So first off, here is what i know about my device.
Samsung Galaxy S4
SCH-I545VRUGOC1
I installed TWRP because i guess i had no idea what i was doing, and locked myself out of my recovery mode, then tried to fix that by flashing the stock rom which didn't work either.
when booting this is what happens.
Recover - Nothing
Odin/Download mode - Works.
Power only - boots to black screen that says "Samsung Custom OS" then the screen turns black, blue LED comes on and it doesn't restart or turn off, it just seems to be frozen. (I expect this is because i've attempted to flash multiple times thinking the issue was my cable connection)
no idea what to do now, can't boot can't think straight since i've been at it for hours finding things on these forums but nothing seems to work through odin.
Can't download VZW Repair assistant (no online link, and phone wont recognize through my pc)
samsung kies wont recognize it either.
Help?
Need any info, ill be at my computer for a few hours trying to hash this out.
-Don't care about my data on the phone, it's replaceable.
Thanks.
Fixed it Via SmartSwitch
Was able to recover all of the aforementioned.
Hi guys, I have a samsung galaxy j600fn/ds, tryed to flash twrp, something went wrong and now I'm locked on the ''Samsung'' logo screen
I guess it is brick, though I'm totally stuck at the screen, the phone won't even turn off, so I don't know how to acces download mode to install stock firmware.. anyone can be of help?
EDIT: solved.. of course the solution was just to wait for the battery to be completley depleted, I just got scared there not beeing able to do anything
Wait-
So you just let your phone in bootloop all night (?), then you charge it without turning it on,
waited till 30%, and then you put it in download mode and installed the firmwere?
Does it really work? 'cause I tried to do that before, and the bootloop stopped. I tought I ended up into an hard brick.
I pressed powen and tried to put the phone into download mode, but nothing.
I put the usb on my pc, and odin was actually reading it, so I tried again and again to get into the download mode.
Afret 30 minutes, i pressed power again, (and finally) the boorloop restarted.
Well um.. the phone now is probably at 60%.. I hope it wont stop again, and I hope this method will work.