umi device detected as cmi by TWRP - Xiaomi Mi 10 Questions & Answers

Hi, I'm trying to flash miui 12 or 12.5 into my mi 10 because my carrier never bothered beyond 11.6.0.
I've followed some tutorial here at XDA and when trying to install a umi rom, it gives me error 7 and tells me my device is cmi and the rom is meant for umi. I've tried several different roms with no success. I also tried flashing a cmi rom but it doesn't boot, since TWRP detected the device as such, but after a successful installation, it will not boot properly, it gets stuck at MI screen and restarts over and over.
Any help would be much appreciated.
Edit: I managed to solve it by redoing everything from scratch (at lease form where I was able to, since my phone was unable to boot Android).

Related

[Q] Rooting Help

I I rooted my phone and honestly im new to all this. I installed a new lollipop rom released by Oneplus on my oneplus one today, and after not too long got tired of the bugs and my service constantly crashing, so i tried to re install the original ROM but i messed up. Now im stuck in fastboot and my computer discovers the device but i have no os and no recovery mode, any flashing i try to do on fastboot results in a FAILED<COMMAND WRITE FAILED <INVALID ARGUMENT>> PLEASE HELP

Lenovo Tab3 (TB3-710I) bricked!

Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Do you find the solution yet? Cause I face the same problem too..
Tzul please help.. :crying:
me too, please help
similar issue, cant power on, keep on vibrate loop interval, no display, not detected by pc
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
asdrubalsantander said:
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
Click to expand...
Click to collapse
THis might WOrk i ve havent tried yet ,tho i wanna flash it now
https://forum.xda-developers.com/android/development/tb3-710i-tb3-710f-rom-stock-rom-lenovo-t3437810
same problem faced,can any developer please help us

Bootloop after Flashing Custom Rom (ATU-L21) Need Help

Yesterday I tried to Flash LineageOS on my ATU-L21
The installation works fine but as the Phone reboots, it loops.
I waited the whole night, but nothing happens. Its Bootloop seems not to end up.
Does Anybody knows how to Install a custom Rom clearly without a bootloop?
I tried it with ADB and TWRP but nothing worked.
Almost the same issue as yours, im getting stucked on "Your devices cant be trusted" thing after i flash the stock rom. Please send help ((

RN3 SD automatically Getting in EDL Mode... Help Pls

Dear All,
It is different Thread then others, pls read carefully for better understanding.
Story Started from May 10th, 2020, My RN3 SD (OS Miui 10) has gone in EDL mode suddenly, I tried to recover back but it didn't get the boot in any other mode and was unable to flash any ROM. in MI Flash I tried everything nothing happened. I just gave up on it and after battery fully discharges I put it in charge .. it was booted up automatically and everything was working fine. first I thought it was an OS related issue so I installed Custom from but this issue is happening every day...... 3 days ago same thing happen I tried to install firmware via MI Flash , it was detected but unable to flash .. receiving error Send NOP Command. i tried test point method and all tutorials which were mentioned in XDA or any other community but still having same issue....

ASUS_X01AD not working properly after flashing custom ROM

Thank you for reading this thread.
Dear XDA members,
I tried rooting my device "ASUS_X01AD" 3days ago. But somehow i failed and brick my phone.
Googled a way to unbrick and manage to boot it back but it was not my original ROM.
So i tried download other Custom ROM and Stock ROM,
Pixel Exp (Flashed and stuck in bootloop (not fastboot loop)
Havoc (Failed to flash)
Cherish OS (Flashed and stuck in bootloop (not fastboot loop)
After that i use this (https://www.asus.com/my/mobile/phones/zenfone/zenfone-max-m2/helpdesk_bios/)
But after that i notice i have some problem with it, IMEI unknown and without android 10 update the device wont get wifi turn on.
Im not sure if i did any wrong in following guides, But please help me with my favourite device.
Almost all guides i already follow in XDA threads but maybe i miss some steps,
Also try to enable diag *#3424#* but my pc wont detect unless i boot it up with Volume + & - qualqom usb will detect but still i cant use qfil qcn restorer option
The reason why i want to root it because i want to recover my internal storage data with data recovery.
Been using this device 5 years ago .
Thank you again for reading my thread.

Categories

Resources