Ayuda con Razr D1 XT914- Revivir su firmware !! - Motorola Droid RAZR

Buenos dias Comunidad (Ante todo con el permiso de los administradores y las disculpas del caso si va el tema en esta sección), Bueno paso a comentar:
Tengo un motorola razr xt914, con jelly bean 4.1.2 (de fabrica), un dia decidi probar actualizar a kitkat 4.4.2 via microsd con un rom retail de brazil xt918 que vi x alli. Segui todos los pasos de unos tutoriales, bueno y si. me actualizo, pero se volvia muy lento el desplazarse y todo por las paginas, a pesar de que le daba restaurar de fabrica en varias veces, igual andaba muy lento con la rom kitkat 4.4.2 que le instale. Pero bueno es asi que decidi hacer un donwngrade o volverlo a lo original, flashearlo con una rom de internet (formato mzf) XT914 para chip MT6575. Use muchas alternativas y herramientas de flash y sus tutoriales, como el rsd lite, el rsd conected, el adb, etc, pero ninguna me reconocia el telefono o me daba problemas, etc. Bueno entonces trate de aplicar comandos fastboot, Flashear definitivamente la rom xt914 que baje de internet, y en uno de esos comandos q use, se colgo buen tiempo el cel conectado a la pc. Pase a reiniciar el cel, Prendo el celular y siempre se queda atascado en la Letra M de Motorola, de alli no anda mas
!! Por favor Alguien si pudiera ayudarme para restaurarle el sistema a ok !! (ya viejito, Pero al menos lo uso para escuchar musica o para probar algunas apks. Etc). No qiero darlo por muerto este RAZR D1 XT914
PD, Intento ahora recuperar el cel, con SP FLASH TOOL 5.1, y tambien con otras herramientas parecidas, y en ambas me sale error de autenticacion, o que no coinciden los archivos o que no es compatible, etc. ADJUNTO algunas Imagenes o archivos que uso para la recuperacion y no sale nada.
[email protected] (para cualquier ayuda, Gracias)

AndroidRAZR said:
Buenos dias Comunidad (Ante todo con el permiso de los administradores y las disculpas del caso si va el tema en esta sección), Bueno paso a comentar:
Tengo un motorola razr xt914, con jelly bean 4.1.2 (de fabrica), un dia decidi probar actualizar a kitkat 4.4.2 via microsd con un rom retail de brazil xt918 que vi x alli. Segui todos los pasos de unos tutoriales, bueno y si. me actualizo, pero se volvia muy lento el desplazarse y todo por las paginas, a pesar de que le daba restaurar de fabrica en varias veces, igual andaba muy lento con la rom kitkat 4.4.2 que le instale. Pero bueno es asi que decidi hacer un donwngrade o volverlo a lo original, flashearlo con una rom de internet (formato mzf) XT914 para chip MT6575. Use muchas alternativas y herramientas de flash y sus tutoriales, como el rsd lite, el rsd conected, el adb, etc, pero ninguna me reconocia el telefono o me daba problemas, etc. Bueno entonces trate de aplicar comandos fastboot, Flashear definitivamente la rom xt914 que baje de internet, y en uno de esos comandos q use, se colgo buen tiempo el cel conectado a la pc. Pase a reiniciar el cel, Prendo el celular y siempre se queda atascado en la Letra M de Motorola, de alli no anda mas
!! Por favor Alguien si pudiera ayudarme para restaurarle el sistema a ok !! (ya viejito, Pero al menos lo uso para escuchar musica o para probar algunas apks. Etc). No qiero darlo por muerto este RAZR D1 XT914
PD, Intento ahora recuperar el cel, con SP FLASH TOOL 5.1, y tambien con otras herramientas parecidas, y en ambas me sale error de autenticacion, o que no coinciden los archivos o que no es compatible, etc. ADJUNTO algunas Imagenes o archivos que uso para la recuperacion y no sale nada.
[email protected] (para cualquier ayuda, Gracias)
Click to expand...
Click to collapse
English only on XDA Please
AndroidRAZR said:
Translation
Good morning Community (First of all with the permission of the administrators and the apologies of the case if the subject is in this section), Well I will comment: I have a motorola razr xt914, with jelly bean 4.1.2 (factory), one day I decided to try updating to kitkat 4.4.2 via microsd with a retail rom from brazil xt918 that I saw there. I followed all the steps of some tutorials, well yes. I update, but it became very slow to scroll and everything through the pages, although it gave it a factory restore several times, it was still very slow with the kitkat 4.4.2 rom that I installed. But hey, so I decided to do a donwngrade or return it to the original, flash it with an internet rom (mzf format) XT914 for MT6575 chip. I used many alternatives and flash tools and their tutorials, such as rsd lite, rsd conected, adb, etc, but none of them recognized my phone or gave me problems, etc. Well then, try to apply fastboot commands, definitely flash the xt914 rom that you download from the internet, and in one of those commands I use, the cell connected to the pc crashed for a long time. Go to restart the cell, I turn on the cell phone and it always gets stuck in the Letter M of Motorola, there it is no more! Please someone if you could help me to restore the system to ok !! (I'm old, but at least I use it to listen to music or to try some apps. Etc). I do not want to consider this RAZR D1 XT914 PD for dead, I now try to recover the cell, with SP FLASH TOOL 5.1, and also with other similar tools, and in both I get an authentication error, or that the files do not match or that it is not compatible , etc. I ATTACH some Images or files that I use for recovery and nothing comes out. [email protected] (for any help, Thanks)
Click to expand...
Click to collapse

Related

[ROM] TELCEL stock ROM MEXICO / root CWM / Samsung Galaxy S II S2

Hi, this stock ROM is ONLY for SGS2 from carrier Telcel - Mexico. If your SGS2 is from an other carrier, this is not for you.
Hola, este ROM es sólo para quienes tienen un Samsung Galaxy S II de Telcel México y quieren regresarlo lo más parecido a stock, por cuestiones de garantía.
Nota: Yo no me hago responsable de lo que le pase a sus equipos, mascotas, familia o vidas por instalar software o hacer cualquiera de las cosas que se dicen en este hilo. Me limito a proporcionar la información que otros me han hecho el favor de pasarme, esperando que les sea útil, así que lean y lean y lean.
Note: Do this under your own risk. I'm not responsable for any thing you decide to do with this info. So read, read and read.
************************************************************************************
************************************************************************************
Spanish:
Como sabrán, quienes tenemos un SGS2 de Telcel aún no contamos con el ROM/KERNEL originales para restaurar el sistema una vez que lo rooteamos, pero a continuación pongo a su disposición un link con un respaldo del ROM original con root, realizado a través del ClockWorkMod.
El archivo debe ser instalado por medio de CWM recovery, ya que fue así como se hizo.
TIP: Si aún no utilizas un ROM cocinado, pero piensas hacerlo, lo mejor es que hagas un backup con CWM de tu sistema original como respaldo inmediatamente después de rootear el dispositivo, así podrás regresarlo a como estaba con tu propio sistema original y sólo tendrías que seguir los pasos relacionados con el JIG para resetear el contador de flasheos y quitar la señal de advertencia.
Yo rootié mi SGS2 con CF-Root de Chainfire y todo salió bien. Además, liberé el celular para poder utilizarlo en cualquier compañía, con la aplicación Samsung Galaxy S2 SIM unlock code finder, también de Chainfire, disponible en Android Market (https://market.android.com/details?id=eu.chainfire.sgs2simunlockcode), funciona perfectamente bien, pues aunque me puso error en el código, de todas formas quedó liberado.
Los pasos son los siguientes:
1. Descarga a tu PC el archivo que encuentras en esta dirección http://www.megaupload.com/?d=LC183M3Q Luego lo descomprimes. Es en realidad una carpeta comprimida con varios archivos (respaldo hecho con CWM).
2. Copia la carpeta en tu SGS2 a la siguiente ubicación: "sdcard/clockworkmod/backup/" Se supone que ya debe estar rooteado tu equipo y lo quieres regresar al ROM de Telcel, por lo que ya debería existir esa ubicación.
3. Apaga el dispositivo.
4. Entra al menú de CWM (volum arriba + tecla home + power) y haz un respaldo tu sistema.
5. Apaga nuevamente el equipo.
6. Vuelve a entrar al menú de CWM y restaura el sistema utilizando la carpeta que descargaste y descomprimiste.
7. IMPORTANTE: dentro del mismo menú de CWM limplia la información dando 3 veces "wipe data/factory reset" y 3 veces "wipe cache partition". Con esto quedará el ROM de Telcel pero con root.
8. Ahora utiliza el JIG como se muestra en este video http://www.youtube.com/watch?v=wIALLtbyaqU Así podrás regresar el contador de flasheos a cero y quitar el triángulo que aparece al encender el celular.
Recuerda, si haces esto, es BAJO TU PROPIO RIESGO.
************************************************************************************
************************************************************************************
English:
This is only a backup ROM from Telcel made on CWM. If you don't have this version, then this is not for you.
Steps to install this:
1. Download this file http://www.megaupload.com/?d=LC183M3Q (it is a compressed folder).
2. Unzip it and make a copy on your device to "sdcard/clockworkmod/backup/" I assume that your galaxy is rooted, with a custom ROM/Kernel and you want to put back a stock ROM from Telcel, for warranty purposes.
3. Turn off your SGS2.
4. Get in CWM menu (volum up + home + power) and make a back up of your system.
5. Turn off your SGS2.
6. Get in CWM menu again and make a recovery using downloaded folder.
7. IMPORTANT: It is better if you make a "wipe data/factory reset" and "wipe cache partition" 3 times. With all this you will have a stock ROM from Telcel with root access.
8. Now use a JIG like this http://www.youtube.com/watch?v=wIALLtbyaqU so you can get back to 00 flash counter and turn off the initial warning sign.
If you have a problem, just Odin another ROM. Remember, this could help with warranty, but is not sure at all and you have to do it under your own risk.
************************************************************************************
************************************************************************************
OJO
Para hacer tu propio JIG, les dejo esta información que amablemente me pasaron http://www.megaupload.com/?d=GTXJ83CP
To make a JIG follow this http://www.megaupload.com/?d=GTXJ83CP
Aclaro que no soy ningún experto, solamente intento poner a su disposición la información y archivos que me han proporcionado, pues yo estuve mucho tiempo tratando de encontrar el ROM original para cuestiones de garantía, pero no ha sido liberado y esta fue la opción que se me hizo más viable. Si posteriormente se libera el ROM original y alguien sabe de ello, agradecería un post privado con el que se me haga saber.
I'm not an expert, just try to help, so if you can tell me some thing to fix here, I'll appreciate a post.
POR FAVOR, NO OLVIDES DAR GRACIAS SI ESTO TE LLEGA A SERVIR y si tienes alguna información que pueda agregarse o corregirse, tampoco dudes en hacerlo saber.
Please, don't forget to say thanks if you like.
************************************************************************************
************************************************************************************
EN EL POST #37 GATONICO NOS DEJÓ EL SIGUIENTE MENSAJE:
ON POST #37 GATONICO LEFT THIS:
"Aqui esta el rom completo
Hi, this is the most recent Stock Branded Firmware of Samsung Galaxy S2 for Telcel Mexico Operator
OPERATOR: Telcel Mexico
PDA : I9100UMKG4
PHONE : I9100UMKG2
CSC : I9100TCEKG4
All the credits for NaPa from Underground Mexico
http://www.multiupload.com/HY444SJSS0
Code:
Password: www.underground.org.mx
YO NO HE PROBADO EL ROM DEJADO POR GATONIC Y NO ME HAGO RESPONSABLE DE SU CONTENIDO O DE LA LIGA QUE NOS PROPORCIONÓ.
I didn't try that ROM, so I'm not responsable for it or that link.
************************************************************************************
************************************************************************************
Gracias a:
Thanks to:
XDA-developers
Chainfire - [CF-Root v4.1] [Samsung Galaxy S2 SIM unlock code finder]
M_aqui - JIG info
Gatonico - ROM Telcel
Llegando a mi casa lo pruebo muchas gracias!
Ojalá te sirva.
Hi perrito2000, i have a question, the ROM that you mentioned is the same that TELCEL, but, where it's from or what are the differences? Have you did tried it? How do you rooted your sgs2?
Thanks
Que tal perrito2000, tengo una dudad, la ROM dices que es lo mas parecido al de TELCEL, pero de donde es realmente o en que no se parece? Ya lo has probado tu? Como rooteaste tu sgs2?
Gracias canijo.
Saludos
Cesantony said:
Que tal perrito2000, tengo una dudad, la ROM dices que es lo mas parecido al de TELCEL, pero de donde es realmente o en que no se parece? Ya lo has probado tu? Como rooteaste tu sgs2?
Gracias canijo.
Saludos
Click to expand...
Click to collapse
Es el ROM original, lo único que varía es el kernel, pues está rooteado. Lo demás es lo mismo que cuando lo acabas de comprar en telcel.
El ROM se sacó de un respaldo del sistema original, pero ya estando rooteado, por eso no es exactamente igual y por lo mismo es necesario utilizar el JIG para poner en ceros el contador de flasheos.
Sí, ya lo probé y me funcionó, pero como todo, puede no servir en todos los dispositivos. Nada que no pueda arreglarse con odin. su propósito es que lo puedas llevar a garantía si flasheas tu galaxy.
Para rootear tu cel te recomiendoseguir el post chainfire (cf-root).
perrito2000 said:
Es el ROM original, lo único que varía es el kernel, pues está rooteado. Lo demás es lo mismo que cuando lo acabas de comprar en telcel.
El ROM se sacó de un respaldo del sistema original, pero ya estando rooteado, por eso no es exactamente igual y por lo mismo es necesario utilizar el JIG para poner en ceros el contador de flasheos.
Sí, ya lo probé y me funcionó, pero como todo, puede no servir en todos los dispositivos. Nada que no pueda arreglarse con odin. su propósito es que lo puedas llevar a garantía si flasheas tu galaxy.
Para rootear tu cel te recomiendoseguir el post chainfire (cf-root).
Click to expand...
Click to collapse
Ok, i thought that was another ROM, but no, now i think i will root my sgs2 and save this guide for later.
Thanks man.
A ok, pensé que era otra ROM acoplada, pero no, entonces excelente, ahora creo que procederé a rootear mi sgs2 y guardar ésta guía por si un día se necesita.
Gracias canijo y saludos.
Have anyone here read the forum rules?
Only english language is allowed.. You can write it in english and then you can translate it to your native language..
Sorry, not my rules.. Forum rules.
Sorry. I was trying to help. I'll translate it.
perrito2000 said:
Sorry. I was trying to help. I'll translate it.
Click to expand...
Click to collapse
No problem.. I was just warning you before a moderator did
Ok ok, just english, sorry...
Saludos
Nice downloading incase i fk up my galaxy c:
Si me lo regreso a "stock", excepto por el root jejeje pero se ve bien todo
Any news on getting telcel's kerenel? It kinda freak me out having that yellow triangle on boot LOL.....also, do you know how to remove Telshits boot animations?? I simply hate them!!!
Another question....why the hell every time i search something on google's widget or on the adress bar on the web browser tit doesnt search anything, instead gives me an error and the adress bar changes to something like z.telcel.mobi.....?
I came from a free htc nexus one so i never faced those issues, so if you can help me that would be great! btw, already downloaded the file, nice solution in case you screw up your phone LOL
Spanish:
Alguna noticia del kernel de telcel? me saca de pedo el triangulito amarillo del incio ja ja. Por cierto, saben como remover las animaciones de inicio y apagado de telcel? Las odio!!
Otra pregunta: Por que siempre que busco en el widget de google o en la barra del navegador no busca nada y en lugar de eso la direccion cambia a z.telcel.mobi?
Tenia un htc nexus one liberado, nunca me enfrente a esas broncas por eso ahorita ando medio sacado de pedo jejeje, si me pueden ayudar, se agradece el paro. por cierto, gracias por la rom, ya la baje , buena solucion en caso de que valga ma"!$!# jaja
Lo del search es pq Telcel le quita Google y usa su estúpido portal.
Para quitar el triangulo amarillo necesitas un jig, ayer hice uno casero y quedó a la perfección.
Solo basta con insertarlo y listo! no tienes que hacer otra cosa, el triangulo desaparece.
Checa las fotos:
twitpic.com/60kbfa
twitpic.com/60kb96
Which CR Root
Hi Perrito, I am also in Mexico and currently stuck on kernel UMKE4, which kernel was originally loaded on your phone? and which CF Kernel did you end up loading in order to root? (also what modem file did you use?)
Thanks!
Hola Perrito, yo tambien estoy en mexico y estoy usando el kernel original UMKE4, que kernel tenia tu celular originalmente? que kernel de CF usaste para rootear? Que archivo de modem usaste?
Gracias!
JyYyM said:
Hi Perrito, I am also in Mexico and currently stuck on kernel UMKE4, which kernel was originally loaded on your phone? and which CF Kernel did you end up loading in order to root? (also what modem file did you use?)
Thanks!
Hola Perrito, yo tambien estoy en mexico y estoy usando el kernel original UMKE4, que kernel tenia tu celular originalmente? que kernel de CF usaste para rootear? Que archivo de modem usaste?
Gracias!
Click to expand...
Click to collapse
Para rootear mi equipo por primera vez utilicé CF-Root de Chainfire. Instalé el archivo con terminación KF3 sobre el ROM de Telcel, siguiendo los pasos que en ese post se mencionan y me funcionó.
Traer el el ROM de Telcel rooteado te permite utilizar más funciones, pero conservas toda la porquería que te hace lento el dispositivo y que drena la batería.
El ROM que yo estoy utilizando actualmente es el I9100XXKG1. Hay otros ROMs más recientes o personalizados que he probado, pero esa es el que a mi parecer hace funcionar mejor mi galaxy, más rápido, estable, sin basura de Telcel y es oficial de Samsung.
Saludos.
JIG
Homemade usb JIG for Samsung Galaxy S II i9100 & Galaxy S i9000
----
El resultado de mi JIG casero para quitar el triangulo (warning) después de flashear el Galaxy S II y tmb sirve para entrar al download mode
youtu.be/D0n3KEWy22E?hd=1
Saludo voy iniciar con esto del roteo con mi nuevo galaxy s2, ¿es correcto que debo seleccionar solo lo que hagan referencia KE4 ? No me interesa perder la garantía, lo que me interesa es quitar toda la basura de telcel y tener lo mas actualizado posible. He visto muchos tutoriales en youtube pero antes de hacerlo quiero que me digan si debo tomar algo en cuenta o solo selecciono del post "ROM + Guide]Official i9100 Firmwares KF1/2/3/4/, KG1/2/3/5/6/7 Download" el que desee instalar?
KE is just a version, you can use KE1 or KE4. Although in several forums they recomend to use the same version which is installed in your actual ROM. I think Telcel has PDA: I9100UMKE1, if it is your case, you can try with KE1 from this link, where they have the "unsecure" firmwares. This does not erase what you already have, only gives you root access.
CF-ROOT v4.1
KE es solo una versión, puedes utilizar KE1, o KE4, da igual. Aunque es recomendable usar el mismo que tienes instalado. Creo que telcel tiene por defecto PDA: I9100UMKE1, si es tu caso, puedes probar con KE1 de la liga arriba mencionada. Lo que hay ahi son firmwares "inseguros" y te agrega aplicacion de super usuario sobre éstas.
Whats up guys. I am new about android style but i give a chance with s2. Mine is from telcel. Before upgrading android system and made a root, i called samsung 01800 and i asked about garantee if i root or updrade os or unlocked and they told me we wont lose garanty.
So i upgrade to Rom litening5 and after install it i remove the yellow triamgle installing the original kernell from I9100KG1.
I will use this rom and tell you my opinion.
Sent from my GT-I9100 using XDA App

[Q] I brickeo my atrix

brikeo I install my atrix after the ramfixtest try using a sbf but I could not throw a erro yego loading ram was saying nosequé boloader and marked more and then fail
Now as this without baterria ago to charge as putting it in the plug does not load
After trying the froyo sbf gave me this error
what should I do?
PD:I translated it in google do not understand much English
El traductor de Google no anda si escribis mal en español
La screenshot es muy chica, no se entiende muy bien que paso ahí. Trataste de instalar la sbf de la leak? O flasheaste una rom por Recovery?
---
He doesn't seem to understand english, I'll try to translate any suggestion for him.
grasias, me dise "failed flissing prosses. phone (0000). error seding ram dowload for bootloader. drevice api error: 0xe0030009 command (null) (0xE5131009)"
Please try to describe step by step what did you do.
if you don't understand english you'd better try to search for a spanish forum, that might help you.
I don't get how do you expect a response in english when you don't seem to understand it.
PS: no offense by any means
Trata de explicarnos que hiciste paso por paso desde el principio por favor.
pregunte aca porque ya abia preguntado en el grupo android y se que los de aca so unos de los que mas saven
lo que ise fue intalar la rom atrix ics v2.0 y el ramfixtest después de eso el cel no prendió mas despues me dijeron esto en el grupo android "yo le puse el ramfixtest y ya no quizo prender,, asi que le quite la pila la meti de nuevo, lo prendi, lo puse en modo "Fastboot" y con la aplicacion de "MOTOROLA ATRIX FASTBOOT by Ecstacy42" hice lo siguiente;.. 1.- opcion (16) Borrar todo 2.- opcion (1) Desbloquear Bootloader 3.- opcion (2) Flashear Recovery y listo,,... pude volver hacer los wipes e instalar otra ves la rom pero sin el ramfixtest esta ves,,, y todo bien... asi ya no tienen que instalar el firmware" cuando llege al ultimo paso el de flashear el recobery no termino de cargar y termine prediendo el recobery
I'll try to help. Seen your post in grupoandroid.
You're using Windows 8. Can you try in a Windows XP or 7 PC?
Someone reported not a long time ago that W8 does not like RSD lite :S
dante_124 said:
pregunte aca porque ya abia preguntado en el grupo android y se que los de aca so unos de los que mas saven
lo que ise fue intalar la rom atrix ics v2.0 y el ramfixtest después de eso el cel no prendió mas despues me dijeron esto en el grupo android "yo le puse el ramfixtest y ya no quizo prender,, asi que le quite la pila la meti de nuevo, lo prendi, lo puse en modo "Fastboot" y con la aplicacion de "MOTOROLA ATRIX FASTBOOT by Ecstacy42" hice lo siguiente;.. 1.- opcion (16) Borrar todo 2.- opcion (1) Desbloquear Bootloader 3.- opcion (2) Flashear Recovery y listo,,... pude volver hacer los wipes e instalar otra ves la rom pero sin el ramfixtest esta ves,,, y todo bien... asi ya no tienen que instalar el firmware" cuando llege al ultimo paso el de flashear el recobery no termino de cargar y termine prediendo el recobery
Click to expand...
Click to collapse
O sea, que te quedaste sin recovery? El telefono no arranca?
Lo que flasheaste primero fue una rom o un firmware? (.zip con recovery o con el RSDLite?)
lo primero que flashe fue la rom ics v2.0 con el ramfixtest (creo que el ram fix fu lo que daño mi equipo) despues intente flashear el sbf foyo
hey guys, at least you can try to talk via PM or english, right? I mean this is an english language forum. Sorry
jhonnyx said:
hey guys, at least you can try to talk via PM or english, right? I mean this is an english language forum. Sorry
Click to expand...
Click to collapse
Indeed. Is against the rules to speak another language other than english here.
Im sorry, im just trying to help him and translate so you can help him too.
Looks like he flashed AtrICS with the ramfix and then flashed the oficial Froyo .sbf file with RSDlite.
Any ideas?
dante_124 said:
lo primero que flashe fue la rom ics v2.0 con el ramfixtest (creo que el ram fix fu lo que daño mi equipo) despues intente flashear el sbf foyo
Click to expand...
Click to collapse
No puede ser el ramfix, quizá se flasheo mal la sbf. Acá todos hablan en ingles, se va a complicar que te puedan ayudar. Proba con la sbf de Ginger o pregunta directamente en grupoandroid porque nuestro Atrix es internacional, acá te van a decir que lo brickeaste.
he is using Win 8..... also seems that some people is following his thread in grupoandroid.
Do not ever flash to Froyo!!!!!!!
Flash the newest GB SBF you can find.

Dell Streak no puedo entrar al recovery que hice mal??

Hola amigos, desde antes pido disculpas si este post ya fue resuelto antes, pero e buscado y me e dado cuenta que solo en ingles hay, ademas ni uno resuelve mi problema, e buscado durante horas una solución, la situación que tengo la versión android 2.2.2 ya rootie el teléfono, e instale el recovery, pero a la hora de entrar al Software upgrade via update.pkg on sd card, tendría que aparecer el recovery, en lugar de eso sale este mensaje:
android system recovery utility - gausb1a135100
to perform an emergency software recovery, you will need to insert a microsd card containing an update file......
En fin ya instale varios recoverys el clockwork, otros que encontre en el programa para instalarle recovery.. seguí los tutoriales al pie de letra, pero no puedo accesar no se que hice mal! por favor ayuda expertos...
Repito ya rootie e incluso instale el rom manager, porfavor ayuda :
Porfavor si es necesario mover el tema con mucho gusto es que necesito ayuda por favor...

PROBLEMS [Android butterfly]

First of all sorry about my bad English, I'm Spanish so this post will be available in my language down.
Two years ago I bought a Chinese or Korean or I don't know where the mobile was made. The brand is: Android and the model Android Butterfly. The first year it works fine but after this first year it becomes to give failures. The most important failure was that when I try to download something on the playstore It says: Error: insuficient storage ( I have 32gb free) so like everybody I went to Settings and I try to change the default installation location and the problem was that when I change the option the mobile phone dindt do nothing.
I saw in a youtube video a way to change this manually so like the comments was good I decided to try it. It consist on changing /system/etc file. The problem was that the mobile died and it didnt swich. Definetly I decide to install a ROM but the problem was that there is no ROM for my mobile phone (I couldt found it). I found another that is similar (Star x920) and doing some maneuvers it swichs but the principals problems are:
- When I install the ROM and I swich the mobile phone (every first time) the default camera app appears in the screen for more or less 10 seconds and disappear from the mobile phone without a trace. When I try to take a photo I get the error: Can not connect to camera. (I have try with lots of app and the resoult was the same)
- The volumen down key doesnt works.
Please help my
I have attached some images
===============================
ESPAÑOL
===============================
Buenas tardes, no se por donde empezar.
Hace dos años mas o menos que me compre un móvil por internet, durante un año funciono perfectamente y poco a poco fueron fallando cosas. La mas significativa fue que a la hora de descargar aplicaciones de la play store siempre me decia que el espacio de almacenamiento era insuficiente. Ante este error cualquiera hubiera procedido a cambiar la unidad de almacenamiento por defecto a la sd pero el problema era que en este móvil no realizaba ningún cambio. Desesperado decidí buscar algún vídeo por youtube. Di con uno, consistía en modificar un archivo del /system/etc , en los comentarios parecía que funcionaba, de no haber sido por ello no lo hubiera hecho y la sorpresa fue que no se volvió a encender el teléfono.
Llegados a este punto no me quedo otra que entrar en modo recovery y volver al estado de fabrica, cosa que no surtió efecto. Decidi buscar una ROM compatible, aqui llego el segundo problema, no se si ya lo he mencionado pero el movil en cuestion es un Android Butterfly (marca china, japonesa o que se yo) y no aparecia una ROM para este dispositivo por ningun lado. Encontre un movil muy parecido el STAR x920 y tras un arduo proceso consegui que arrancara.
Ahora con el movil en mis manos, funcionando tengo los siguientes problemas:
- Nada mas instalar la nueva ROM, al iniciar el movil aparecer el icono de la camara por defecto (que tienen todos los dispositivos) y a los 10 segundos desaparece y no hay rastro de ella en todo el dispositvo. A la hora de intentar sacar una foto (ya sea con otra aplicacion descargada) sale el error de: no se puedo conectar a la camara.
- La tecla de volumen hacia abajo no funciona correctamente.
Por favor necesito ayuda, adjunto algunas imagenes sobre el dispositivo que espero que sirvan de ayuda
darkblu10 said:
First of all sorry about my bad English, I'm Spanish so this post will be available in my language down.
Two years ago I bought a Chinese or Korean or I don't know where the mobile was made. The brand is: Android and the model Android Butterfly. The first year it works fine but after this first year it becomes to give failures. The most important failure was that when I try to download something on the playstore It says: Error: insuficient storage ( I have 32gb free) so like everybody I went to Settings and I try to change the default installation location and the problem was that when I change the option the mobile phone dindt do nothing.
I saw in a youtube video a way to change this manually so like the comments was good I decided to try it. It consist on changing /system/etc file. The problem was that the mobile died and it didnt swich. Definetly I decide to install a ROM but the problem was that there is no ROM for my mobile phone (I couldt found it). I found another that is similar (Star x920) and doing some maneuvers it swichs but the principals problems are:
- When I install the ROM and I swich the mobile phone (every first time) the default camera app appears in the screen for more or less 10 seconds and disappear from the mobile phone without a trace. When I try to take a photo I get the error: Can not connect to camera. (I have try with lots of app and the resoult was the same)
- The volumen down key doesnt works.
Please help my
I have attached some images
===============================
ESPAÑOL
===============================
Buenas tardes, no se por donde empezar.
Hace dos años mas o menos que me compre un móvil por internet, durante un año funciono perfectamente y poco a poco fueron fallando cosas. La mas significativa fue que a la hora de descargar aplicaciones de la play store siempre me decia que el espacio de almacenamiento era insuficiente. Ante este error cualquiera hubiera procedido a cambiar la unidad de almacenamiento por defecto a la sd pero el problema era que en este móvil no realizaba ningún cambio. Desesperado decidí buscar algún vídeo por youtube. Di con uno, consistía en modificar un archivo del /system/etc , en los comentarios parecía que funcionaba, de no haber sido por ello no lo hubiera hecho y la sorpresa fue que no se volvió a encender el teléfono.
Llegados a este punto no me quedo otra que entrar en modo recovery y volver al estado de fabrica, cosa que no surtió efecto. Decidi buscar una ROM compatible, aqui llego el segundo problema, no se si ya lo he mencionado pero el movil en cuestion es un Android Butterfly (marca china, japonesa o que se yo) y no aparecia una ROM para este dispositivo por ningun lado. Encontre un movil muy parecido el STAR x920 y tras un arduo proceso consegui que arrancara.
Ahora con el movil en mis manos, funcionando tengo los siguientes problemas:
- Nada mas instalar la nueva ROM, al iniciar el movil aparecer el icono de la camara por defecto (que tienen todos los dispositivos) y a los 10 segundos desaparece y no hay rastro de ella en todo el dispositvo. A la hora de intentar sacar una foto (ya sea con otra aplicacion descargada) sale el error de: no se puedo conectar a la camara.
- La tecla de volumen hacia abajo no funciona correctamente.
Por favor necesito ayuda, adjunto algunas imagenes sobre el dispositivo que espero que sirvan de ayuda
Click to expand...
Click to collapse
I don't think the new rom is compatible, and I'm not seeing anything on XDA about your device.
Because there is not a specific forum for your device, this thread will be moved to Android Q&A, Help & Troubleshooting
Hello,
I removed one of your photos because it showed your IMEI
Hola,
Quité una de tus fotos , ya que mostró su IMEI
sd_shadow said:
I don't think the new rom is compatible, and I'm not seeing anything on XDA about your device.
Because there is not a specific forum for your device, this thread will be moved to Android Q&A, Help & Troubleshooting
Click to expand...
Click to collapse
and what can I do? On the internet I cant find a specific ROM for my phone.
darkblu10 said:
and what can I do? On the internet I cant find a specific ROM for my phone.
Click to expand...
Click to collapse
I don't think there's a fix without the correct firmware.
Sent from my XT907 using Tapatalk

Help with my HUAWEI MATE 10 LTE

/*ESPAÑOL/*
Muy buenos dias compañeros de XDA.
paso a comentarles que recientemente rootie mi terminal huawei MATE 10 LTE (RNE-L03C527) de movistar aquí en México.
y después quise instalarle una rom, el problema fue que aun cuando seguí las instrucciones al pie de la letra la rom no me daba permiso de montar en la partición
cuando la estaba instalando en TWRP.
lo intente varias veces hasta que lei por ahi que tenia que cambiar el formato de la partición a f2fs y lo hice. pero después de hacerlo el terminal se brickeo.
ahora no puedo encenderlo si quiera. he intentado con TOOL ALL IN ONE para los equipos huawei. la aplicación me detecta que el teléfono esta conectado pero como la pantalla no enciende no puedo ponerlo en modo adb o fastboot para volver a insertarle el rom stock (que no he podido conseguir aun) aunque da igual si lo consigo o no ya que como mencione no he podido encender la terminal.
Espero alguien se apiade de mi estupidez y pueda ayudarme un saludo compañeros desarrolladores.
/*GOOGLE TRADUCTOR/*
Good morning fellow XDA.
step to tell you that recently rooted my terminal Huawei MATE 10 LTE (RNE-L03C527) of movistar here in Mexico.
and then I wanted to install a rom (SIRIUS v3.0), the problem was that even though I followed the instructions to the letter the rom did not give me permission to ride in the partition when I was installing it in TWRP.
I tried it several times until I read that I had to change the format of the partition to f2fs and I did. but after doing it the terminal is brick.
Now I can not turn it on. I tried with TOOL ALL IN ONE for the huawei terminals,. the application and my pc detects that the phone is connected but as the screen does not turn on I can not put it in adb or fastboot mode to reinsert the stock rom (which I have not been able to get yet) although it does not matter if I get it or not as I mentioned I could not turn on the terminal.
I hope someone takes pity on my stupidity and can help me a hello fellow developers.

Categories

Resources