Hi,
My device is stuck in bootloop. It is not even showing Logo. It is showing black screen. I have executed the following commands:
1. sudo tools/fastboot-linux flash boot 'TWRP-3.2.3-TwrpBuilder-2018-08-21_14.img'
2. sudo tools/fastboot-linux boot 'WRP-3.2.3-TwrpBuilder-2018-08-21_14.img'
Any help how can start or get into the bootloader?
Regards
Related
Hi,
I just flashed Cyanogemod10 to my Artview AT9C-A10W (CEMA10N7 clone) (Allwinner A10) and tablet stuck on spinning Cyanogemod logo.
I tried recovery mode but stuck on spinning Cyanogemod logo.
I can connect with ADB but "ADB reboot recovery" doesn' work too.
ADB devices --> 20080411 device
ADB reboot --> reboots tablet but stuck on spinning logo.
ADB reboot recovery --> boot but stuck on spinning logo.
/mnt/extsd --> d--------- system system
/mnt/sdcard --> d--------- system system
and I'm unable to change them
su --> permission denied
fastboot devices --> no result
fastboot reboot --> waiting for devices (forever)
Any ideas?
Many thanks!!!!
Quote
MultiQuote
Edit
Report
I know how to change the boot logo(logo.bin) form fastboot
but the problem is how can i change boot logo without using fastboot
i can't go to fastboot mode because i think my device(ME-702) doesn't support fastboot(i tried adb reboot bootloader but no benefit)
my device has not any recovery too.
is there any way to change the logo in adb mode?
HTC One MIni2 - Unlocked - TWRP - Rom flashed
Restart the phone and I'm stuck on a black screen, with battery logo on the center, and the red wrigting "This build is for developement purpose only....".
In windows command line, I do "adb reboot recovery" (previously worked) but I have this error:
http://s14.postimg.org/dvvzx6ngh/Immagine.jpg
...and now i cant shotdown/reboot and nothing else...
Any solution?
Hey guys, I'm using asus ZenFone 2 with lineage os. Actually I got stuck with Twrp Bootloop. First I tried the dd command "dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/misc count=1 bs=32" and it broke the loop and it booted to the os. But after a couple of restarts it again went to the loop. I tried the same command but it didn't work, so I tried to use another command which I don't remember now and when I rebooted it my asus logo changed to some colour panel, now it is not booting to recovery. I'm stuck with boot loader. I tried to use adb shell command but it mentioned as "devices null" but when I try the "fastboot reboot" option it works. Please help me with this huge problem. :crying:
So I followed a guide (can't post links but basically I installed Busybox and Terminal Emulator, then used
Code:
dd if=/sdcard/backups/logo.bin of=/dev/block/mmcblk0p11
) to modify the Android boot logo. I made a backup of the logo on my PC, then proceeded to replace the system file. Then I rebooted. Now, logo isn't updated and after the logo it switches to boot animation but is just stuck there. So I install ADB and boot into recovery mode but I can't do anything there because my device is missing an "enter" button. So using ADB, I replace the original backed up file with the system one with
Code:
adb push logo.bin /dev/block/mmcblk0p11
. Now it won't even make it to boot animation, just stuck at starting logo. I can still connect using ADB though. Any way I can recover the device without a hard reset?