Related
I finally made it:laugh: firefox can work on xperia neo v
There are quite jobs needs to done, but basic things works well
didn't test too much but for now
calls works
camera doesn't work
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
####final update
Here is alpha preview with firefox os v1.3pre
files for download:
boot.img
full_haida-ota-eng.root.zip
system.img.xz
firexperia-wifi-modules.SIGNED.zip
it has two way installer
fastboot or cwm choose as you like
installation
fastboot flash boot boot.img
fastboot flash system system.img or install from cwm with full_haida-ota-eng.root.zip
install wifi modules via cwm
do factory reset/wipe data
reboot and enjoy
####update5
I was upgrade my system to i7 haswell maybe I can build roms for whole 2011 xperia series at least I will try I am not promise anything but stay tuned
####update 4
Here is alpha preview with firefox os v1.1hd_pre
files for download:
boot.img
full_haida-ota-eng.root.zip
system.img.7z
firexperia-wifi-modules.SIGNED.zip
it has two way installer
fastboot or cwm choose as you like
installation
fastboot flash boot boot.img
fastboot flash system system.img or install from cwm with full_haida-ota-eng.root.zip
install wifi modules via cwm
do factory reset/wipe data
reboot and enjoy
####update 3
switch to v1.1.0hd branch
rebase with fxp-229-cm9 branch
HDPi build works and screen resolution is normal now
need a lot of time to provide a stable version but maybe a preview version
####update 2
no release for now
Sources of builds
and credits goes to
neuralassembly
sola
FXP
Cyanogenmod
AOSP
Mozilla.org
GNU/Linux
thanks to them
oh yeah ... well done, take help from other developers
Looks nice there, bud.
Edit: Darn it. Too bad I can't speak Japanese and those guide just canned me to Tokyo.
Greetings, from HTC One via Tap-A-Talk IV Beta
Good work bro ,
keep going for this project :good:
Best regards from Team Blur
What's this thread doing on general section? Should be in dev section. Great job bro. Hope some devs jump in this project.
Sent from my MT11i
What kernel you used?
n1kolaa said:
What kernel you used?
Click to expand...
Click to collapse
Cm9 kernel
Sent from my haida
can you help me i get some eror when i almost fully compile source for anzu
he tells some file that you want to fork dont exist
n1kolaa said:
can you help me i get some eror when i almost fully compile source for anzu
he tells some file that you want to fork dont exist
Click to expand...
Click to collapse
Show me to log of error
Or check my sources
edit : probably the problem with this
add on anzu.xml
origin code
Code:
<project path="prebuilt" name="platform/prebuilt" revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
proper code
Code:
<project path="prebuilt" name="platform/prebuilt"[COLOR="Red"] remote="aosp" [/COLOR]revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
Sent from my haida
yacloo said:
Show me to log of error
Or check my sources
edit : probably the problem with this
add on anzu.xml
origin code
Code:
<project path="prebuilt" name="platform/prebuilt" revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
proper code
Code:
<project path="prebuilt" name="platform/prebuilt"[COLOR="Red"] remote="aosp" [/COLOR]revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
Sent from my haida
Click to expand...
Click to collapse
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
n1kolaa said:
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
Click to expand...
Click to collapse
I run the patch like this it was okay
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget --no-check-certificate https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch [COLOR="Red"]-p1[/COLOR] < b2g-webapp-zip.patch
yacloo said:
I run the patch like this it was okay
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget --no-check-certificate https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch [COLOR="Red"]-p1[/COLOR] < b2g-webapp-zip.patch
Click to expand...
Click to collapse
Code:
[email protected]:~/b2g_work/B2G/gaia/build$ wget --no-check-certificate https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
--2013-07-09 11:05:10-- https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
Resolving dl.dropboxusercontent.com (dl.dropboxusercontent.com)... 50.19.230.97
Connecting to dl.dropboxusercontent.com (dl.dropboxusercontent.com)|50.19.230.97|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 780 [text/x-diff]
Saving to: `b2g-webapp-zip.patch.1'
100%[======================================>] 780 --.-K/s in 0s
2013-07-09 11:05:11 (107 MB/s) - `b2g-webapp-zip.patch.1' saved [780/780]
[email protected]:~/b2g_work/B2G/gaia/build$ patch -p1 < b2g-webapp-zip.patch
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- webapp-zip.js.orig 2013-06-23 20:26:30.135978096 +0900
|+++ webapp-zip.js 2013-06-23 20:43:02.032010587 +0900
--------------------------
File to patch: webapp-zip.js
patching file webapp-zip.js
Hunk #1 FAILED at 335.
1 out of 1 hunk FAILED -- saving rejects to file webapp-zip.js.rej
[email protected]:~/b2g_work/B2G/gaia/build$ ^C
[email protected]:~/b2g_work/B2G/gaia/build$
look still geting error can you shere webapp-zip.js from your pc ?
n1kolaa said:
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
Click to expand...
Click to collapse
I was update my sources, patch will not work on my sources
but anyway you can build your b2g without patch or you need to patch manually
mozilla was create new branch for hdpi devices called "v1.1.0hd"
I will build with v1.1.0hd branch but now I am busy maybe next week
I am trying to port B2G to smultron and i have a question :
In kernel the only modification is to add init.b2g.rc file and edit init.rc right?
init.b2g.rc :
Code:
service fakeperm /system/bin/fakeperm
class main
user root
service b2g /system/bin/b2g.sh
class main
onrestart restart media
service rilproxy /system/bin/rilproxy
class main
socket rilproxy stream 660 root system
user root
group radio
on boot
exec /system/bin/rm -r /data/local/tmp
# set RLIMIT_NOFILE to increase soft limit from 1024(default) to 2048.
# Hard limit keeps default value(4096).
setrlimit 7 2048 4096
edit init.rc with this :
Code:
service fakeperm /system/bin/fakeperm
class main
user root
service rilproxy /system/bin/rilproxy
class main
socket rilproxy stream 660 root system
user root
group radio
service servicemanager-g /system/bin/servicemanager
class core
user system
group system
critical
service b2g /system/bin/b2g.sh
class main
onrestart restart media
or i need to edit more?
n1kolaa said:
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
Click to expand...
Click to collapse
Today I checked the repository of gaia, and I found that the problem on webapp-zip.js has already been fixed 5 days ago.
So, if you downloaded the latest source codes, you do not have to apply the above patch any more.
I omitted the above commands from my blog.
Moreover, as for the manifest file, the download errors often take place depending on the network state.
When I downloaded the latest codes today without modifying manifest file,
I executed "./config.sh anzu" several times to obtain successful download.
Nice OS, I like it
neuralassembly said:
Today I checked the repository of gaia, and I found that the problem on webapp-zip.js has already been fixed 5 days ago.
So, if you downloaded the latest source codes, you do not have to apply the above patch any more.
I omitted the above commands from my blog.
Moreover, as for the manifest file, the download errors often take place depending on the network state.
When I downloaded the latest codes today without modifying manifest file,
I executed "./config.sh anzu" several times to obtain successful download.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=43408927#post43408927 i succes with building it but problem is resoution
and lot of things not sized well
n1kolaa said:
http://forum.xda-developers.com/showthread.php?p=43408927#post43408927 i succes with building it but problem is resoution
and lot of things not sized well
Click to expand...
Click to collapse
I have not tried your rom yet, but have you set the following environment variables before building?
The first one is for firefox icons, and second one is for high resolution device.
export MOZILLA_OFFICIAL=1
export GAIA_DEV_PIXELS_PER_PX=2
neuralassembly said:
I have not tried your rom yet, but have you set the following environment variables before building?
The first one is for firefox icons, and second one is for high resolution device.
export MOZILLA_OFFICIAL=1
export GAIA_DEV_PIXELS_PER_PX=2
Click to expand...
Click to collapse
thanks,also camera is fixed to photo only
im thinking to make 3.0.x kernel for b2g also i add you on my grup for b2g with i made
@yacloo i can add you too if you want to be part of it
n1kolaa said:
thanks,also camera is fixed to photo only
im thinking to make 3.0.x kernel for b2g also i add you on my grup for b2g with i made
@yacloo i can add you too if you want to be part of it
Click to expand...
Click to collapse
I cannot post to developer section because I am a new one, so I post here.
Please do not use the picture in my blog in your thread.
As for the update, I think you should not apply OTA system update
because my patch to gaia and gecko will be erased.
As a result, battery always shows 100%, the LED of home button is always ON,
and the effect of "GAIA_DEV_PIXELS_PER_PX=2" will also be erased.
How to extract the boot image from your tablet, set up adb, compile a new kernel with cool options, and put it back on your device!
UPDATED for Lolipop 12-4-14
This is a complete guide from start to finish, copy and paste style. If you own a gpe510, or any other AOSP device and a computer running Debian Linux, you can do all of this.
If all you want is the modified kernel, download from here:
Sleekai Kernel For The LG GPad 8.3 V510(GPE)
I am hoping people will add to this with new ideas and patches in order to make the GPE a better device. I see the potential for all sorts of neat stuff.
This guide assumes a basic knowledge of linux operating systems. I am using a Debian 64 bit (wheezy stable) to compile my kernel. I have used many, many hours of the day to figure this out properly, with specific thanks going to Pete of Pete's Blog for his image tools.
But first, lets keep this simple. As usual, you are on your own if you brick your device, though I don't see how you could if you are paying attention!
There are dependencies for building your own kernel, and you will definitely want to use a 64 bit system as a 32 bit will not work properly for kitkat.
Here are all of the packages you will need, and they will draw in further dependencies when you install, but these are it! So, here we go:
Open a terminal, su to root and:
Code:
dpkg --add-architecture i386
##This will allow for the use of some 32 bit librarys that we will need for both adb and the kernel compile. Then:
Code:
apt-get update ; apt-get install libc6:i386 libncurses5:i386 libstdc++6:i386 libc6-i686:i386 lzop liblzo2-dev libgpm2:i386 git-core git gnupg flex bison gperf libsdl1.2-dev libesd0-dev build-essential zip curl gedit libncurses5-dev zlib1g-dev fakeroot lib32z1-dev lib32ncurses5-dev gcc-multilib g++-multilib
Next, you will need to install adb and have your permissions set up.
In order to do this you will need to go into the developer options on your device to enable debugging on your tablet. Go to settings/about tablet/build number, and tap on build number several times to unlock the developer options.
then:
You will need to create new udev rules for your device in/etc/udev/rules.d on your computer.
Use "lsusb" in your terminal to find the manufactures code of your device. it will show up as a nexus 4, or Google device.
You will need to create a file in your computer in /etc/udev/rules.d/99-android.rules.
You can use gedit if you like:
Code:
gedit /etc/udev/rules.d/99-android.rules
Put the following inside and save, changing the manufactures code as necessary to fit your device, and change “your-login” to your login name on your computer.
Code:
# Google Nexus devices
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666", OWNER="your-login" # Google Nexus devices
18d1 is the manufacturers code.
You will then want to restart udev on your computer:
Code:
service udev restart
you will now have permissions to access your android device from user space.
Now to download adb and get started. You should probably not use adb from the Debian repositories, as it may be an older version. the V510 is using kitkat android and needs the latest build of adb to work properly. It is a good idea to get rid of any old adb files on your computer first. The code below will do just that.
Code:
apt-get purge android-tools-adb android-tools-fastboot
Now download the latest adb bundle from here:
http://developer.android.com/sdk/index.html
Move it into a new directory,
*note -the version number may be different.
Code:
mkdir ~/adb
Code:
cd ~/adb
Code:
unzip adt-bundle-linux-x86_64-20131030.zip
su to root and Move the bundle to /opt:
Code:
mv adt-bundle-linux-x86_64-20131030 /opt/android-sdk-linux-x86_64-20131030
Other google products reside in /opt, this should too. This takes a minute or so on slow machines.
Next we need to link adb to /usr/bin
Code:
ln -s /opt/android-sdk-linux-x86_64-20131030/sdk/platform-tools/adb /usr/bin
Code:
ln -s /opt/android-sdk-linux-x86_64-20131030/sdk/platform-tools/fastboot /usr/bin
We are ready to begin working on the device! first start the adb server and look for your device.
Code:
adb start-server
Code:
adb devices
You will then need to confirm the connection on your tablet screen to allow access from your computer.
Okay, wev'e got this first part set up. it's time to begin working on a kernel!
Lets get started.
I want to extract and build my zimage in $userspace, so open a terminal from /home and:
Code:
mkdir ~/android
Download the source package LG-V510(G-Pad 8.3 Google Play Edition)_Android_KK_V510_11c from here :
https://www.lg.com/global/support/opensource/opensourceList?types=ALL&search=lgv510
and open it to find three folders, including a kernel folder. Move the kernel folder to ~/android and then:
Code:
cd ~/android
Download the current eabi-4.6 Google tool chain to ~/android to cross compile your android kernel:
Code:
git clone https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.8
When it completes, enter ~/android/kernel and get ready to compile a new kernel from the source code.
Code:
cd ~/android/kernel
Do the following each time you compile another kernel. This insures the correct path.
Code:
export PATH=$PATH:~/android/arm-eabi-4.8/bin
Code:
arm-eabi-gcc --version
you should get:
Code:
arm-eabi-gcc (GCC) 4.6.x-google 20120106 (prerelease)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Continue on! we are not done yet!
Code:
export ARCH=arm
Code:
export SUBARCH=arm
Code:
export CROSS_COMPILE=arm-eabi-
Code:
export KERNEL_DEFCONFIG=palman_defconfig
Code:
make clean
Code:
make palman_defconfig
Doing the above prepares your kernel build environment, while the following code opens a interface to configure the kernel. You can simplify this later however you wish.
But for now,
Code:
make menuconfig
At this point make whatever changes you wish to the config file. for a list of the changes I have made, and that are in the kernel available to download, look in the sleekai kernel thread. (At start of thread, or in my signature).
After saving your changes,
Code:
make
Or conversely
Code:
make -o2
which will optimize the make. I recommend using simply "make" first, as the other may not properly show errors should any occur.
and go make a pot of coffee, and probably drink the whole pot! This will take a while.
At the end you will see that the "zimage is ready"
If you have errors, then you probably have dependency problems. If not, Yay! You compiled your first kernel, but we are not done yet!
The zimage you just produced is stored in /kernel/arch/arm/boot/zImage
To put both the zimage and any modules into a separate folder inside of ~/android so as to make extracting them easier:
Code:
mkdir ~/android/kernel_output
Code:
cp ~/android/kernel/arch/arm/boot/zImage ~/android/kernel_output/zImage
Code:
find ~/android/kernel -name "*.ko" -exec cp {} ~/android/kernel_output/ \;
The above code will find all the modules for your kernel. We don't need them for this tutorial, but it still is mighty handy!
Extract your boot image (boot.emmc.win) for the ramdisk You may also download the stock.zip from the sleekai kernel thread
Now make a backup to transfer to your computer.
Reboot to recovery on your tablet. I'm using TWRP. If you are using something else it should be just as easy.
Code:
adb reboot recovery
Only tick the boot
make a backup to your sd card. I changed the name to boot.bac to keep it simple
reboot
make sure the backup of boot is present using a file explorer. I am using ES File explorer.
On your computer, pull the file using adb
Code:
adb start-server
Code:
adb devices
Code:
adb pull /storage/sdcard1/TWRP/BACKUPS/LG0000606708987/boot.bac /home/sleek
sleek is my user name, replace with yours or use tilde.
What we are after is the "boot.emmc.win" file. We will only need this and the zImage to compile a new boot image and run it on your tablet.
The tools to extract the kernel and ramdisk from the boot.emmc.win you will need the following boot image tools installed on your computer.
So, again, lets keep this simple. All the tools are forked to my github for ease of use.
So lets install the tools! Ready?
As Root:
Code:
mkdir /usr/src/android
Code:
mkdir /usr/src/android/boot
Code:
cd /usr/src/android/
Code:
git clone https://github.com/sleekmason/bootimg-tools.git
Code:
cd bootimg-tools/libmincrypt/
Code:
gcc -c *.c -I../include
Code:
ar rcs libmincrypt.a *.o
Code:
cd ../mkbootimg
Code:
gcc mkbootimg.c -o mkbootimg -I../include ../libmincrypt/libmincrypt.a
Code:
cp mkbootimg /usr/local/bin/
Code:
cd ../cpio
Code:
gcc mkbootfs.c -o mkbootfs -I../include
Code:
cp mkbootfs /usr/local/bin/
Code:
cd /usr/src/android/bootimg-tools/mkbootimg/
Code:
wget https://raw.github.com/sleekmason/bootimg-tools/master/mkbootimg/unmkbootimg.c
Code:
gcc -o unmkbootimg unmkbootimg.c
Code:
cp unmkbootimg /usr/local/bin/
Now everything is in place to make a new boot image for your tablet!
Finishing this up is easy.
As root, we made a directory in /usr/src/android/boot for your boot.emmc.win file to be torn apart:
Code:
cd /usr/src/android/boot
Copy your new zImage and the boot.emmc.win file you extracted from your device.
Note* "/home/sleek" is the path on my computer, and should be changed to reflect yours!
Code:
cp /home/sleek/android/kernel_output/zImage /usr/src/android/boot
Code:
cp /home/sleek/boot.emmc.win /usr/src/android/boot
Now unpack the boot.emmc.win file to get the ram disk
Code:
unmkbootimg -i boot.emmc.win
Now you may remove the current boot.emmc.win file, and the resultant kernel file as we will be making new ones, and rename the zImage file you moved here to "kernel".
Code:
rm boot.emmc.win kernel && mv zImage kernel
Now repack using the command given to you during the unpack:
Code:
mkbootimg --base 0 --pagesize 2048 --kernel_offset 0x80208000 --ramdisk_offset 0x82200000 --second_offset 0x81100000 --tags_offset 0x80200100 --cmdline 'console=ttyHSL0,115200,n8 androidboot.hardware=palman lpj=67677 vmalloc=300M' --kernel kernel --ramdisk ramdisk.cpio.gz -o boot.emmc.win
Note* For 500 users this may be different. Simply use the command from the prompt.
You should now have a brand new boot.emmc.win image in /usr/src/android/boot!!
To push back on your device to test
Code:
adb reboot bootloader
Code:
fastboot boot boot.emmc.win
USING the above will only put your kernel build into memory and should not hurt your device if something goes wrong. Use the command below to make it permanent.
If everything works well, you should see the change you made to the /general/perf-localversion/ in your settings under kernel. from there it's up to you to hack away! make new and unique kernels!
If you want your kernel to survive reboot do;
Code:
fastboot flash boot boot.emmc.win
then:
Code:
fastboot reboot
You can expect a slow bootup on the first go around as your new kernel populates the widgets, etc..
NOTE*For the use of the latest eabi-4.7 google toolchain, you will need the libglibc libraries from the "testing" branch as gcc 4.7 is in testing. I advise completing the guide with eabi 4.6 first before trying 4.7.
The gamma correction though enabled in 4.6, isn't near as good as the native compile using 4.7. If you want the screen to look like it does in my kernels, you will need 4.7
For the eabi-4.7:
Code:
git clone https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7
That's it! Good luck! Remember, If you post a kernel you have made, you will need to show your kernel source, etc . . . Git hub is a good choice to keep track of changes you make. Best regards, Sleekmason
If you are a v500 user and want to build your own kernel!
First, read the above post as you will be following the steps listed there.
There are just a couple of changes that you will need to do, and maybe a riddle to figure out as well. Read on.
You will need to download the v500 source from here: https://www.lg.com/global/support/opensource/opensourceList?superOsCategoryId=CAT00000001&osCategoryId=
Look for the LGV500 kernel source.
Where it says "palman" for the defconfig items, you will want to replace that with the defconfig for the 500, so replace palman with awifi-perf,
like this:
Code:
export KERNEL_DEFCONFIG=awifi-perf_defconfig
Code:
make awifi-perf_defconfig
Important
Follow the guide and build with the Google Toolchain eabi4.6 first
LG compiled for the 500 and 510 using the eabi4.6. It works, and will give you a feel for the process, and allow you to use your kernel.
Note*
I use the google toolchain eabi-4.7 for the sleekai kernels as it changes the gamma to reasonable defaults on the 510 without further tweaking. After compiling a kernel or two to get a feel for it, you should try using the 4.7 toolchain. To do so, you will probably need the libglibc libraries from the "testing" branch. Look it up.
caveat: I recieved a compile error for the v500 when I used the eabi-4.7 . . . . . yeah. You'll have to work that out.
There is a modified anykernel script for emmc devices out there (Search Google or here in xda). You will have to use the anykernel script after making your boot.emmc.win image as fastboot won't work on the 500. There may be another way .... But I don't know what it is.
Edit* There are now two different kernels for the LG GPad 8.3 V500(awifi) located in the development section of the forum.
Best of luck! -sleekmason
Can this be used to create a kernel for the non Google Play Edition Gpad to be able to allow us to install the Google Play edition ROM on it
Sent from my SM-N900W8 using Tapatalk
Canadoc said:
Can this be used to create a kernel for the non Google Play Edition Gpad to be able to allow us to install the Google Play edition ROM on it
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
I would think so. I edited the above to show how to put the image back on your device. You should be able to use any source you wish to compile with. My thoughts are that you might wish to examine the differences in the ram disk if any.
sleekmason said:
Howdy, I would like to share how to download the kernel source for the gpe, compile a new custom kernel, and insert into your LG gpad GPE 510.
...
Click to expand...
Click to collapse
Thanks for the guide. Making GPE kernel was my next step in trying to get the GPE ROM to work on v510.
I just made guide for getting your Android build environment going if you want to use it on your blog or where ever.
http://forum.xda-developers.com/showthread.php?t=2629008
The problem with v500 is that it does not have fastboot so we can not flash kernel like how you can on v510.
@ AndroidUser00110001 Hi! I know that somebody tweaked the Any kernel to work on emmc devices... Maybe it could be adapted? Actually getting the menuconfig and make should be the same process as well as repacking the image. I take it just getting it back on the 500 device is the problem?
I will add your link to this post for setting up a build environment if that is okay.
sleekmason said:
@ AndroidUser00110001 Hi! I know that somebody tweaked the Any kernel to work on emmc devices... Maybe it could be adapted? Actually getting the menuconfig and make should be the same process as well as repacking the image. I take it just getting it back on the 500 device is the problem?
I will add your link to this post for setting up a build environment if that is okay.
Click to expand...
Click to collapse
Is that the koush any kernel? I was going to mess with that too. I just need a small break now. Took a few days to get new system exactly how I want it.
Go ahead and use guide...mo problem at all.
AndroidUser00110001 said:
Is that the koush any kernel? I was going to mess with that too. I just need a small break now. Took a few days to get new system exactly how I want it.
Go ahead and use guide...mo problem at all.
Click to expand...
Click to collapse
Yes, from here: http://forum.xda-developers.com/showthread.php?t=847265
I noted that boot was on block nncblk0p21 on our device, and not 22? better double check that. I tried it Anykernel as well to no avail when getting this set up. Fastboot is Awesome!
It's taxing to get it set up right. Seems like things change very often for the dependencies based on other package changes. I ussually go with testing but redid two partitions with stable. The 32 bit is just going to sit there, which seems kinda silly due to the need for extra packages in 64 to compile for 32 but whatever. Yeah.
AndroidUser00110001 said:
Thanks for the guide. Making GPE kernel was my next step in trying to get the GPE ROM to work on v510.
I just made guide for getting your Android build environment going if you want to use it on your blog or where ever.
http://forum.xda-developers.com/showthread.php?t=2629008
The problem with v500 is that it does not have fastboot so we can not flash kernel like how you can on v510.
Click to expand...
Click to collapse
I don't understand, what are the differences bettween the v500 and v510? they both have the same hardware, but not the same boot partition or something like that?
ayziaa said:
I don't understand, what are the differences bettween the v500 and v510? they both have the same hardware, but not the same boot partition or something like that?
Click to expand...
Click to collapse
The boot on the 500 cannot be fully unlocked.
This is not the appropriate place to ask that kind of question should be asked in general or in troubleshooting. Also, there are already many threads about this same question please use the search utility to find them. Thank you.
i was thinking of writing a tutorial about this as well for the v500 but this better than i would have done Well done...
sleekmason said:
Yes, from here: http://forum.xda-developers.com/showthread.php?t=847265
I noted that boot was on block nncblk0p21 on our device, and not 22? better double check that. I tried it Anykernel as well to no avail when getting this set up. Fastboot is Awesome!
It's taxing to get it set up right. Seems like things change very often for the dependencies based on other package changes. I ussually go with testing but redid two partitions with stable. The 32 bit is just going to sit there, which seems kinda silly due to the need for extra packages in 64 to compile for 32 but whatever. Yeah.
Click to expand...
Click to collapse
Another tool that i ported to the lg g pad a bit back along with loki-doki...
Quick hint, dont bother with direct mmc naming as qcom (i dont know if the other chip makers do the same thing, as i have only had qcom devices) has given us a simple naming scheme...
should only be used by people who know how to use this,
darkassain said:
i was thinking of writing a tutorial about this as well for the v500 but this better than i would have done Well done...
Another tool that i ported to the lg g pad a bit back along with loki-doki...
Quick hint, dont bother with direct mmc naming as qcom (i dont know if the other chip makers do the same thing, as i have only had qcom devices) has given us a simple naming scheme...
should only be used by people who know how to use this,
Click to expand...
Click to collapse
Thank you! Have you successfully used your script to push a kernel onto the 500 Or 510?
I would think this could be very handy for sharing a custom kernel for the 510, but would like to see somebody report a positive test result. Very cool!
sleekmason said:
Thank you! Have you successfully used your script to push a kernel onto the 500 Or 510?
I would think this could be very handy for sharing a custom kernel for the 510, but would like to see somebody report a positive test result. Very cool!
Click to expand...
Click to collapse
yes back before when there wasnt a overclocked kernel i basically used this to push it when i would compile just the kernel (didnt maintain so i now use dyn's)...
yes this is only for the v500 as this has the extra loki step, but it shouldnt be hard to modify so it does not do that extra step
darkassain said:
i was thinking of writing a tutorial about this as well for the v500 but this better than i would have done Well done...
Another tool that i ported to the lg g pad a bit back along with loki-doki...
Quick hint, dont bother with direct mmc naming as qcom (i dont know if the other chip makers do the same thing, as i have only had qcom devices) has given us a simple naming scheme...
should only be used by people who know how to use this,
Click to expand...
Click to collapse
Hi, can you just use a generic anykernel updater script too?
For example to flash a packed boot.img
Code:
run_program("/tmp/busybox", "dd", "if=/dev/block/platform/msm_sdcc.1/by-name/boot", "of=/tmp/boot.img");
run_program("/tmp/unpackbootimg", "-i", "/tmp/boot.img", "-o", "/tmp/");
run_program("/tmp/repack-ramdisk.sh");
run_program("/tmp/mkbootimg.sh");
run_program("/tmp/busybox", "dd", "if=/tmp/newboot.img", "of=/dev/block/platform/msm_sdcc.1/by-name/boot");
mako and flo can do like this.. I think HTC One as well, since they are all similar qcom chipsets maybe this device can too
poondog said:
Hi, can you just use a generic anykernel updater script too?
For example to flash a packed boot.img
Code:
run_program("/tmp/busybox", "dd", "if=/dev/block/platform/msm_sdcc.1/by-name/boot", "of=/tmp/boot.img");
run_program("/tmp/unpackbootimg", "-i", "/tmp/boot.img", "-o", "/tmp/");
run_program("/tmp/repack-ramdisk.sh");
run_program("/tmp/mkbootimg.sh");
run_program("/tmp/busybox", "dd", "if=/tmp/newboot.img", "of=/dev/block/platform/msm_sdcc.1/by-name/boot");
mako and flo can do like this.. I think HTC One as well, since they are all similar qcom chipsets maybe this device can too
Click to expand...
Click to collapse
thanks for reminding me the any kernel uploaded by me won't work as it doesn't parse Loki images xorrectly, I'll upload the correct one once I have access to my pc
darkassain said:
thanks for reminding me the any kernel uploaded by me won't work as it doesn't parse Loki images xorrectly, I'll upload the correct one once I have access to my pc
Click to expand...
Click to collapse
could you please re-post to a different thread rather than hijacking this thread, as your script does not work with the 510 currently and I do not want to go to get confused with my kernel how to. what started out to maybe become relevant apparently will not and so shouldn't be confused with what I'm doing here. I will be happy to try working with your script if you would open up an appropriate thread. Thank you.
Installed kenel and booted. Now to install trickster mod and fix the dang gamma.
gunnyman said:
Installed kenel and booted. Now to install trickster mod and fix the dang gamma.
Click to expand...
Click to collapse
Excellent!! Pleased to know that you are able to use it. Have you changed your gamma settings?
I did on mine and am pleased with the result. I'm using 248, 252, 255 using trickster mod What are you going with?
sleekmason said:
Excellent!! Pleased to know that you are able to use it. Have you changed your gamma settings?
I did on mine and am pleased with the result. I'm using 248, 252, 255 using trickster mod What are you going with?
Click to expand...
Click to collapse
havent messed around too much.
I had a thought about this and I think it would be awesome if we could incorporate faux123's bits for gamma and color control. His fauxcontrol offers much more granular control than trickster.
I'm thankful to have what we have, and THANK YOU for sharing it, but like any good geek I WANTS MOAR!!!!!
gunnyman said:
havent messed around too much.
I had a thought about this and I think it would be awesome if we could incorporate faux123's bits for gamma and color control. His fauxcontrol offers much more granular control than trickster.
I'm thankful to have what we have, and THANK YOU for sharing it, but like any good geek I WANTS MOAR!!!!!
Click to expand...
Click to collapse
me too! I'll look into it. There are other apps besides trickster to give you more control. I think at the kernel level everything we need is unlocked. And yeah, he knows his business like nobody else eh? I'm just persistent.
--- This is not made by me. This is an repost to XDA. ---
This is 32-bit, so you can use offical TWRP.
Made by hacker12455 and Lukapanio
Bugs:
Camera and minor bugs
Installation:
(Requires ADB + Fastboot, Linux on the PC and Git)
1. Format the data partition with ext4 (Format != Wipe)
2. Download the latest halium-boot.img from https://sourceforge.net/projects/ubports-cedric/files
3. Run
Code:
fastboot flash boot halium-boot.img
4. Download the latest ubports-touch.rootfs-xenial-armhf.tar.gz from https://ci.ubports.com/job/xenial-rootfs-armhf/
5. Download the latest system.img from https://sourceforge.net/projects/ubports-cedric/files
6. Clone https://gitlab.com/JBBgameich/halium-install git repository and go into that folder
7. Run
Code:
./halium-install -v -p ut path/to/ubports-touch.rootfs-xenial-armhf.tar.gz path/to/system.img
8. Reboot your phone.
9. Run
Code:
dmesg -w
and look for an GNU/Linux device.
10. Connect your computer to the RNDIS network that appeared when you rebooted your phone. (If not already happened.)
11. SSH onto the device:
Code:
ssh [email protected]
12. Follow that guide: http://docs.ubports.com/en/latest/porting/running-ut.html
You made it!
Source: https://github.com/ubports-on-cedric
Download: http://ubports-cedric.sf.net
Fail, ignore
Screenshots!
Note: Visual glitch already fixed, old screenshots.
About this device is coming soon.
Nice, i will try it tomorrow
[censored because imei leak, looking for new screenshot]
@nift4 the broken things are fixable?
lucki1000 said:
@nift4 the broken things are fixable?
Click to expand...
Click to collapse
Sound yes
Why authors are redacted?
nift4 said:
Why authors are redacted?
Click to expand...
Click to collapse
Follow the xda rules - telegram is not allowed on xda nor is the promotion of any other social media
XDA is a place for discussion and building of android projects - if everyone went to telegram the forums would be empty
I'd advise you remove all references to telegram
Done
EDIT: I did not want to break the rules I simply did not made it
Ok, I:
- Flashed the boot image from fastboot mode
- Booted into TWRP because the halium-install script tried to use ADB (there's no ADB in fastboot mode!)
- image flashed, i rebooted and the RNDIS appeared with
Code:
sudo dmesg -w
but ssh connection is refused on port 22, and when I connected with telnet the commands from the last guide (had to use the Wayback Machine, since the actual page doesn't exist anymore) but
Code:
/ # cat /var/lib/lxc/android/rootfs/ueventd*.rc|grep ^/dev|sed -e 's/^\/dev\///'|awk '{
printf "ACTION==\"add\", KERNEL==\"%s\", OWNER=\"%s\", GROUP=\"%s\", MODE=\"%s\"\n",$1,
$3,$4,$2}' | sed -e 's/\r//' >/usr/lib/lxc-android-config/70-cedric.rules
cat: can't open '/var/lib/lxc/android/rootfs/ueventd*.rc': No such file or directory
/bin/sh: can't create /usr/lib/lxc-android-config/70-cedric.rules: nonexistent directory
/ #
So, what am I doing wrong? Is there a more recent version?
PHP:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
FEATURES
. The first, the one and the only custom vendor for dynamic partition in the world : I challenge you all to show me who did it before !
. If you find any custom rom with similar work since the first release of this one : it is just a copied and a stolen work [fake Google roms +++] !!!
. Compatible with all regions / basebands / firmwares / device variants
. Works with All AOSP/CAF based ROMs [10] & [11], Experimental, Official & Unofficial [TESTED]
. May works on fake Google roms but i don't take any responsibility
. Mount RO/RW available with no bootloop after reboot ! [Magisk/SU required]
. SafetyNet passed
. Full test passed : audio, ril, wifi, bt, fm radio, camera, sensors, fp scanner, nfc, ...
. All known hardware issues on custom roms are fixed : camera, wifi, bt, hdr playback, chrome ... and overheating !
. Custom Kernel with stock zImage [untouched +++]
IMPORTANT !
. NO firmware change is needed from the user side, so don't repeat this question many times ... just read up again !
. Formatting /data is required when you flash this vendor the first time +++
. Never go back to the previous versions due to the possible build.fingerprint change [Old releases are automatically removed] +++
. Dirty Update : always delete with file/root explorer or in TWRP this folder :
/data/property and reboot
You must delete these files & folders in /product partition from your custom rom
[File/Root explorer needed] :
/product/vendor_overlay/29/etc/audio
/product/vendor_overlay/29/etc/audio_policy_configuration.xml
/product/vendor_overlay/29/etc/audio_policy_engine_configuration.xml
/product/vendor_overlay/29/lib/soundfx
/product/vendor_overlay/29/lib64/soundfx
&
/product/vendor_overlay/29/etc/wifi
/product/vendor_overlay/29/overlay
& finally
/product/vendor_overlay/29/etc/qdcm_calib_data_nt36672c_huaxing_fhd_video_mode_dsi_panel.xml
/product/vendor_overlay/29/etc/qdcm_calib_data_nt36672c_tianma_fhd_video_mode_dsi_panel.xml
Already included in this vendor ... and since i'm the original author !
[ OPTIONAL ]
If you have the madness and the paranoia with security like Google, you can still relock /vendor again to the stock RO state ... But you will not be able to mount /vendor RW again even with root until you reflash the provided vendor.zip again !
How to [terminal or adb shell] :
su
tune2fs -O verity /dev/block/dm-1
*******
!!!
MIUI Users : sorry for you, but this is for custom ROMS " ONLY "
TROLLS & NOOBS, stay away ... Please !
!!!
Prerequisite:
POCO X3 NFC = surya
POCO X3 [no NFC] = karna
No matter where you live : india, china, russia, europe, usa or africa ... !
Kernel Source [Prebuilt] : Here
Created : 2021-02-27
Latest Update : 2021-03-21
DOWNLOAD
RESERVED for "Changelog"
Update : [2021-03-21] Highly Recommended !
- overlay folder [/vendor] : secure & total remove ... R.I.P forever !
You can now remove it from here too ... with no issue :
/product/vendor_overlay/29/overlay
[As always : no /data formatting is required if done in the previous builds !]
Update : [2021-03-20]
fix compatibility with all custom roms [10] & [11] +++ :
- build : preserve AVB structure [R/W still available in root mode]
- tune2fs : restore some stock feature flags [dir_index, huge_file, extra_isize]
- fstab [kernel & vendor] : small update
- vendor selinux : property_contexts fix
- build.prop : clean-up
Update : [2021-03-18]
clean-up & rework from scratch :
. all audio config [over 20 files +++]
. all media_codecs config
. new mixer_paths
[=> Exclusive]
- true resampling fix : r.i.p audio crackling and all audio issues in UX, Dialer, emulators ... etc [forever]
- improve audio & camera recording
- audio/video playback [Speaker, Headphones & BT] : Hi-Fi quality, loud & noiseless
[but first, you must delete these files with your File/Root Explorer:
/product/vendor_overlay/29/etc/audio
/product/vendor_overlay/29/etc/audio_policy_configuration.xml
/product/vendor_overlay/29/etc/audio_policy_engine_configuration.xml
/product/vendor_overlay/29/lib/soundfx
/product/vendor_overlay/29/lib64/soundfx]
Update : [2021-03-12]
- move to global 12.0.8.0 as firmware base [boot & vendor]
- ramdisk :
. disable mi_thermald and re-enable again thermal-engine
[on all custom roms : mi_thermald breaks the proximity sensor & suspend service in deepsleep => avoid hand wave gesture & AOD to work properly !]
. clean up & update
- vendor_selinux : add more camera permissions in property_contexts
- media_codecs : remove unused .xml
- ueventd.rc : rework from scratch
Update : [2021-03-07]
- ramdisk :
. update cpuset & schedtune settings
. improve memory multitasking
. make that "damn" fingerprint truly responsive
. enable UFS powersaving
. some clean-up & disable MIUI audio service
- media_profiles :
. rework from scratch
. add slow motion profile support : up to 1080p/120 fps & 720p/960 fps
. front video camera : add 4K support
- build.prop :
=> update parameters for : camera, ril, performance, playback ... and more
Update : [2021-03-05]
- rework from scratch : init.qcom.sh & init.qcom.post_boot.sh
- ramdisk : clean-up and add init.qcom.power.rc
. fix CPU instability : set 300 mHz as CPU minimum frequency for all cores / update schedutil governor parameters
. cpu_boost : improve touch responsiveness
. add built-in display power saving [for both huaxing & tianma panels]
- vendor permissions : rebuild from scratch / fix wronlgy settled paths (by Xiaomi) in some qti.xml
- camera : rework from scratch ISO/lowlight config
- remove dummy hbtp folder ... since there is no binary to load or device specific config
- targetconfig : update CoreCtlCpu to [0,6]
- build.prop : clean up and move NFC parameters to build_surya.prop
- [Bonus] : Wi-Fi signal improved (x2) !!!
. 2.4 Ghz : 144 => 300
. 5 GHz : 433 => 866
[but first, you must delete this folder, with your File/Root Explorer :
/product/vendor_overlay/29/etc/wifi ]
Update : [2021-03-01]
- update msm_irqbalance.conf
- update audio_effects.conf & remove audio_effects.xml
- universal vbmeta & vbmeta_system added
Update : [2021-02-27]
- initial release
- rework all build.prop (vendor & odm) from scratch
- debloated from unused MIUI folders, files & configs
- Kernel :
. enforcing selinux by default
. workqueue enabled in cmdline => better dynamic refresh rate handling by the CPU & stellar deep-sleep
. fstab reworked from scratch
the image you made is for enable rw or not?
my phone is poco x3 nfc surya
janhammer504 said:
To make things clear :
POCO X3 NFC = surya
POCO X3 (no NFC) = karna
No matter where you live (india, china, russia, europe, usa or africa) ... Choose the right vendor.img for your device !
[Both images were tested by me]
Click to expand...
Click to collapse
please share the surya image
aallii2 said:
please share the surya image
Click to expand...
Click to collapse
check the DOWNLOAD link up !
janhammer504 said:
check the DOWNLOAD link up !
Click to expand...
Click to collapse
tnx bro i'm downloading n i'll test
its not working after restart didnt boot n just go to recovry
aallii2 said:
its not working after restart didnt boot n just go to recovry
Click to expand...
Click to collapse
Wich firmware version you had just before flashing ???
The vendor provided must match the firmware version that you have !!!
janhammer504 said:
PREREQUISITE
- adb enabled (developer options)
- root (Magisk/SU)
- adb for Windows (Minimal ADB and Fastboot, provided)
- USB cable always connected
LIVE Flashing :
adb shell
su
dd if=/sdcard/vendor.img of=/dev/block/dm-1
View attachment 5232189
Reboot your phone right away ... then use your File/Root Explorer to test the mount RO/RW option and reboot again to check that there is no bootloop !
(Optional)
If you have the madness and the paranoia with security like Google, you can still re-enable AVB/Verity again ... But you will not be able to mount /vendor RW again even with root until you reflash the provided vendor.img again !
tune2fs -O verity /dev/block/dm-1
Check the full tutorial here to build your own custom vendor ... if you want !
DOWNLOAD
Click to expand...
Click to collapse
... so, I can confirm that this is indeed working nicely, flashed RW vendor for Surya, just for the sake of the functionality, because I'm not sure about benefits I can get from writeable vendor (forgive my ignorance)...
... Thank you very much for your hard work...
just FYI I did flash it in Ofox recovery in built-in terminal, and also directly from running Android via Termux, so you don't need PC for it, just saying...
jeryll said:
... so, I can confirm that this is indeed working nicely, flashed RW vendor for Surya, just for the sake of the functionality, because I'm not sure about benefits I can get from writeable vendor (forgive my ignorance)...
... Thank you very much for your hard work...
just FYI I did flash it in Ofox recovery in built-in terminal, and also directly from running Android via Termux, so you don't need PC for it, just saying...
Click to expand...
Click to collapse
i use adb shell because terminal is too small for me, and for making tutorial.
the benefit ??? well there are a bunch of fixes to do in /vendor... check here for example
(the images i provided are clean with no modification, so i let developers or users doing their own modifications)
janhammer504 said:
Wich firmware version you had just before flashing ???
The vendor provided must match the firmware version that you have !!!
Click to expand...
Click to collapse
india 12.0.9
magisk 21.4
jeryll said:
... so, I can confirm that this is indeed working nicely, flashed RW vendor for Surya, just for the sake of the functionality, because I'm not sure about benefits I can get from writeable vendor (forgive my ignorance)...
... Thank you very much for your hard work...
just FYI I did flash it in Ofox recovery in built-in terminal, and also directly from running Android via Termux, so you don't need PC for it, just saying...
Click to expand...
Click to collapse
hey bro how you flashed in orangefox?
i tried but this happened:
sh: adb: command not found
aallii2 said:
hey bro how you flashed in orangefox?
i tried but this happened:
sh: adb: command not found
Click to expand...
Click to collapse
in recovery adb not needed, just use
dd if=/sdcard/vendor.img of=/dev/block/dm-1
now i cant install any rom :
updater process ended with error 7
pls help
aallii2 said:
now i cant install any rom :
updater process ended with error 7
pls help
Click to expand...
Click to collapse
O.M.G
it looks like you never used terminal
this is not a flashable file, it's a command line.
open terminal in your recovery to do that.
or use adb shell
janhammer504 said:
O.M.G
it looks like you never used terminal
this is not a flashable file, it's a command line.
open terminal in your recovery to do that.
or use adb shell
Click to expand...
Click to collapse
jeryll said:
in recovery adb not needed, just use
dd if=/sdcard/vendor.img of=/dev/block/dm-1
Click to expand...
Click to collapse
Now this came:
write error: Operation not permitted
jeryll said:
in recovery adb not needed, just use
dd if=/sdcard/vendor.img of=/dev/block/dm-1
Click to expand...
Click to collapse
Now this came:
write error: Operation not permitted
Use Minimal ADB and Fastboot.zip, it's the simplest and the fastest way.
Unzip and click on Minimal ADB and Fastboot.exe
type :
adb shell
su
It works like terminal in Windows. You can't go wrong !
Follow the instructions (1 post) !
aallii2 said:
india 12.0.9
magisk 21.4
Click to expand...
Click to collapse
wtf man, you should pick vendor.img from karna folder not surya !
janhammer504 said:
Use Minimal ADB and Fastboot.zip, it's the simplest and the fastest way.
Unzip and click on Minimal ADB and Fastboot.exe
type :
adb shell
su
It works like terminal in Windows. You can't go wrong !
Follow the instructions (1 post) !
Click to expand...
Click to collapse
i installed 12.0.7.0 global with magisk 22.0 then flashed vendor.img v12.0.7.0 but when restarted it stucked n i pressed power .phone boot but root explorer can't mount rw n just added shell in magisk
Hey, does anyone know how to get the propietary blobs out of the device? I'm kinda done with MIUI and i wanna try to compile some custom rom and maybe a legit twrp.
SanHelios said:
Hey, does anyone know how to get the propietary blobs out of the device? I'm kinda done with MIUI and i wanna try to compile some custom rom and maybe a legit twrp.
Click to expand...
Click to collapse
lol i am looking for the same
check this out
vamsi209 said:
lol i am looking for the same
check this out
Click to expand...
Click to collapse
what shall i check out?
SanHelios said:
what shall i check out?
Click to expand...
Click to collapse
Extracting proprietary blobs from LineageOS zip files | LineageOS Wiki
wiki.lineageos.org
SanHelios said:
Hey, does anyone know how to get the propietary blobs out of the device? I'm kinda done with MIUI and i wanna try to compile some custom rom and maybe a legit twrp.
Click to expand...
Click to collapse
Trying to look for the Chinese tool to flash the unofficial TWRP, once I manage to do that will try help on grabbing those needed proprietary blobs. May need guide on how to pull the blobs, am still a noob
dan079 said:
Trying to look for the Chinese tool to flash the unofficial TWRP, once I manage to do that will try help on grabbing those needed proprietary blobs. May need guide on how to pull the blobs, am still a noob
Click to expand...
Click to collapse
Me too... TWRP is tricky, since it can only be done by this OneInject-function of TWRP, but it's possible. I tried the 'current' unofficial release of TWRP for this, but all i got was a reboot to BL.
vamsi209 said:
Extracting proprietary blobs from LineageOS zip files | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
yshalsager, who created the Firmware-script, told me the same.. here is his answer.
"
Hi,
Thanks for your words, glad to hear my work helps.
You can use LineageOS extract files script that will generate vendor tree for you. It is available in any device tree but you should use one of your device so it reads from its proprietary-files.txt or something.
"
Maybe LOS is closer than we think.
SanHelios said:
yshalsager, who created the Firmware-script, told me the same.. here is his answer.
"
Hi,
Thanks for your words, glad to hear my work helps.
You can use LineageOS extract files script that will generate vendor tree for you. It is available in any device tree but you should use one of your device so it reads from its proprietary-files.txt or something.
"
Maybe LOS is closer than we think.
Click to expand...
Click to collapse
niceee, so for mix 4, i extracted the twrp trees using this,
[SCRIPT] TWRP device tree generator
Create a TWRP-compatible device tree only from an Android recovery image (or a boot image if the device uses non-dynamic partitions A/B) of your device's stock ROM. It has been confirmed that this script supports images built starting from...
forum.xda-developers.com
setup the local repo for building twrp trees, using these
1. Installing the tools
A Python library/script to automatically generate TWRP-compatible device tree from a boot/recovery image - twrpdtgen/twrpdtgen
github-wiki-see.page
tried building but the device doesn't lunch after following the steps shown above,
Code:
http://www.hastebin.com/jonexiyowu.md
and one of the dev https://github.com/imjyotiraditya , helped me build an aospa rom for g8x,
now he is on to building twrp for our device odin.
if anyone has twrp trees, we can try geting aospa build ready for our device
vamsi209 said:
niceee, so for mix 4, i extracted the twrp trees using this,
[SCRIPT] TWRP device tree generator
Create a TWRP-compatible device tree only from an Android recovery image (or a boot image if the device uses non-dynamic partitions A/B) of your device's stock ROM. It has been confirmed that this script supports images built starting from...
forum.xda-developers.com
setup the local repo for building twrp trees, using these
1. Installing the tools
A Python library/script to automatically generate TWRP-compatible device tree from a boot/recovery image - twrpdtgen/twrpdtgen
github-wiki-see.page
tried building but the device doesn't lunch after following the steps shown above,
Code:
http://www.hastebin.com/jonexiyowu.md
and one of the dev https://github.com/imjyotiraditya , helped me build an aospa rom for g8x,
now he is on to building twrp for our device odin.
if anyone has twrp trees, we can try geting aospa build ready for our device
Click to expand...
Click to collapse
hey, i'm trying it right now... was able to manage a device tree from the latest weekly of the EU-rom. Repo is syncing right now for the aosp-twrp-11 repository.
U used the same script for the recovery trees?
vamsi209 said:
U used the same script for the recovery trees?
Click to expand...
Click to collapse
yes, i extracted it from the boot.img.
Update... build/envsetup.sh error, anyone any suggestions?
Update managed to get envsetup.sh to work, got following error messages
source build/envsetup.sh
including device/xiaomi/odin/vendorsetup.sh
COMMON_LUNCH_CHOICES: Befehl nicht gefunden.
COMMON_LUNCH_CHOICES: Befehl nicht gefunden.
lunch twrp_odin-eng
In file included from build/make/core/config.mk:291:
In file included from build/make/core/envsetup.mk:266:
build/make/core/product_config.mk:155: error: Can not locate config makefile for product "twrp_odin".
23:22:04 dumpvars failed with: exit status 1
WARNING: Trying to fetch a device that's already there
Traceback (most recent call last):
File "/home/dave/AOSP-Recovery/vendor/twrp/build/tools/roomservice.py", line 431, in <module>
fetch_device(device)
File "/home/dave/AOSP-Recovery/vendor/twrp/build/tools/roomservice.py", line 399, in fetch_device
git_data = search_gerrit_for_device(device)
File "/home/dave/AOSP-Recovery/vendor/twrp/build/tools/roomservice.py", line 86, in search_gerrit_for_device
device_data = check_repo_exists(git_data, device)
File "/home/dave/AOSP-Recovery/vendor/twrp/build/tools/roomservice.py", line 62, in check_repo_exists
raise Exception("{device} not found,"
Exception: odin not found,exiting roomservice
In file included from build/make/core/config.mk:291:
In file included from build/make/core/envsetup.mk:266:
build/make/core/product_config.mk:155: error: Can not locate config makefile for product "twrp_odin".
23:22:05 dumpvars failed with: exit status 1
** Don't have a product spec for: 'twrp_odin'
** Do you have the right repo manifest?
Anyone a good guess?
Did you had any luck, or any chance I can help?
Puksom said:
Did you had any luck, or any chance I can help?
Click to expand...
Click to collapse
well, i made some progress, but i failed again. I posted a thread in the official twrp forum. Maybe you might want to take a look at it.. thx.
Post in thread '[DEV]How to compile TWRP touch recovery' https://forum.xda-developers.com/t/dev-how-to-compile-twrp-touch-recovery.1943625/post-85686505
Puksom said:
Did you had any luck, or any chance I can help?
Click to expand...
Click to collapse
I'm a total beginner, so i might be wrong. But as far as i can tell, the makefiles of the extracted device tree need to be update or even completely rebuild.
Hi, it seems like I was able to execute the script successfully.
It didn't work on Windows because it got stuck on the execution of unpackimg.bat.
I ran it on Linux and it worked (after chmod 777 of boot.img). This is the command I ran:
python3 -m twrpdtgen -o ./odin ./boot.img
output:
Code:
TWRP device tree generator
Version 1.3.0
[INFO] Cloning AIK...
Done! You can find the device tree in odin/xiaomi/odin
I took boot.img from the latest MIUI 12.5.7.0 China Stable
Now I have what it seems to be the device tree (odin.zip) but I don't know what to do it it or what it is.
radoinc said:
Hi, it seems like I was able to execute the script successfully.
It didn't work on Windows because it got stuck on the execution of unpackimg.bat.
I ran it on Linux and it worked (after chmod 777 of boot.img). This is the command I ran:
python3 -m twrpdtgen -o ./odin ./boot.img
output:
Code:
TWRP device tree generator
Version 1.3.0
[INFO] Cloning AIK...
Done! You can find the device tree in odin/xiaomi/odin
I took boot.img from the latest MIUI 12.5.7.0 China Stable
Now I have what it seems to be the device tree (odin.zip) but I don't know what to do it it or what it is.
Click to expand...
Click to collapse
This is great, so we know this script works and does what it is supposed to do...
I checked the makefiles to see if there are any differences, but there are none. So it suggests that it doesn't matter, from which version you get the files from. I love, that the users of the Mi Mix 4 are more open so compiling than the community of the MI 11 Ultra is..
SanHelios said:
This is great, so we know this script works and does what it is supposed to do...
I checked the makefiles to see if there are any differences, but there are none. So it suggests that it doesn't matter, from which version you get the files from. I love, that the users of the Mi Mix 4 are more open so compiling than the community of the MI 11 Ultra is..
Click to expand...
Click to collapse
I'm trying to replicate your steps but I get the same "Can not locate config makefile for product "twrp_odin"." as you did above. In the other topic I see you managed to get past that step.
I see you get some output after executing envsetup.sh and it seems like this is related to the device tree.
Can you please share what you did with the device tree before attempting to compile twrp? I'd like to try myself but I can't find clear instructions.
radoinc said:
I'm trying to replicate your steps but I get the same "Can not locate config makefile for product "twrp_odin"." as you did above. In the other topic I see you managed to get past that step.
I see you get some output after executing envsetup.sh and it seems like this is related to the device tree.
Can you please share what you did with the device tree before attempting to compile twrp? I'd like to try myself but I can't find clear instructions.
Click to expand...
Click to collapse
Acutally i left it completely unchanged, the only thing i did was to change the repository. I deleted the aosp-repository and took the omni-twrp-repository
(https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni)
mkdir twrp
cd twrp
repo init -u git://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni.git -b twrp-10.0
repo sync
after syncing was complete, i followed these instructions
4. Build TWRP from source
A Python library/script to automatically generate TWRP-compatible device tree from a boot/recovery image - twrpdtgen/twrpdtgen
github-wiki-see.page
SanHelios said:
Acutally i left it completely unchanged, the only thing i did was to change the repository. I deleted the aosp-repository and took the omni-twrp-repository
(https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni)
mkdir twrp
cd twrp
repo init -u git://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni.git -b twrp-10.0
repo sync
after syncing was complete, i followed these instructions
4. Build TWRP from source
A Python library/script to automatically generate TWRP-compatible device tree from a boot/recovery image - twrpdtgen/twrpdtgen
github-wiki-see.page
Click to expand...
Click to collapse
Thanks! Now I managed to get the same result as you. The error seems to be raised by mkbootimg.py:
Python:
def write_header(args):
BOOT_IMAGE_HEADER_V1_SIZE = 1648
BOOT_IMAGE_HEADER_V2_SIZE = 1660
BOOT_MAGIC = 'ANDROID!'.encode()
if (args.header_version > 2):
raise ValueError('Boot header version %d not supported' % args.header_version)
To me it seems like this Omni repo includes old version of mkbootimg.py, because in the google repos I can see that the current version of this function looks like this:
Python:
def write_header(args):
if args.header_version > 4:
raise ValueError(
f'Boot header version {args.header_version} not supported')
if args.header_version in {3, 4}:
return write_header_v3_and_above(args)
It seems like Boot header version 3 was introduced with Android 11: https://source.android.com/devices/bootloader/boot-image-header
I think we can't do much with the Omnia repos until they get updated with current mkbootimg.
radoinc said:
Thanks! Now I managed to get the same result as you. The error seems to be raised by mkbootimg.py:
Python:
def write_header(args):
BOOT_IMAGE_HEADER_V1_SIZE = 1648
BOOT_IMAGE_HEADER_V2_SIZE = 1660
BOOT_MAGIC = 'ANDROID!'.encode()
if (args.header_version > 2):
raise ValueError('Boot header version %d not supported' % args.header_version)
To me it seems like this Omni repo includes old version of mkbootimg.py, because in the google repos I can see that the current version of this function looks like this:
Python:
def write_header(args):
if args.header_version > 4:
raise ValueError(
f'Boot header version {args.header_version} not supported')
if args.header_version in {3, 4}:
return write_header_v3_and_above(args)
It seems like Boot header version 3 was introduced with Android 11: https://source.android.com/devices/bootloader/boot-image-header
I think we can't do much with the Omnia repos until they get updated with current mkbootimg.
Click to expand...
Click to collapse
My question is, do the makefiles from the devicetree need to be adjusted or completely rebuild to android 11 parameters? I.e. rhe command "add_lunch_combo" is obsolete and "COMMAND_LUNCH_CHOICES" took its place..
Sorry in advance for this nooby questions...