Fast charging working for everyone after the latest firmware update oneui 3.1 G770FXXS4EUC1? - Samsung Galaxy S10 Lite Questions & Answers

anyone started having issues unable to fast charge using original charger and cable after this update?
not rooted and even other fast charge capable power bank's cannot charge it above 2A.

Related

fast charging on oreo

Is fast charging working on oreo ?
After updating my phone doesn't charge at all using fast charger adapter doesn't even detect that it's plugged in, it detects normal adapter only
And yes my fast charger is working with other phones I got.
Can anyone confirm this ?
please check your charging port first, dirty port may be a cause of this issue

Help with NEWLY INSTALLED redmi note 3 battery!

hello,
over the last year the battery on my kenzo device has been performing poorly over time, to the point where the battery doesnt charge past 60% and that charge doesnt last more than 2 - 3 hourse of use!
also over the last year (phone was bought on october 2016) the included charger and usb cable stopped working altogether! so now im charging with an old samsung 1A wall charger and samsung usb cable.
so i finnally installed a new battery, its an official xiaomi 4000mah battery (bm46 just like the one that comes with the phone) and while battery life is much improved and standby times are much improved, the battery also doesnt charge past 70 - 75%,
could this be because of the usb wall charger and the cable?
im guessing i need a 5V - 2A charger ? could a quick charge 3.0 charger work?
also, i have a custom rom installed (aim_rom) and any oreo or nougat rom i install show the little ray on the battery icon like when its charging even when its not charging! any thoughts? thanks.
DONT USE QC 3.0 IT WILL DESTROY YOUR PHONE. Our Phone doesnt support QC 3.0
where did you buy the battery? i'm looking for a new one
Dnlz said:
where did you buy the battery? i'm looking for a new one
Click to expand...
Click to collapse
I would like to know too, thanks.

3rd Party Charger no longer Fast Charging on Pie

Hi,
I bought a Qualcomm charger from Amazon for my S9+ and it was working fine on Oreo but since the update to Pie, I can only fast charge on Samsung chargers. I flashed back to Oreo and fast charge was working again, however i'm now on Pie again.
Before I start looking to purchase another fast charger and testing, wondering whether anyone else is experiencing a similar issue?
I did read on Google, that there were Pixel fast charge issues with Pie but these articles are dated August 2018.
Both my wall charger (Aukey) and car charger (Anker or Aukey, I forget; I'll need to double check) does fast charging on Pie for me.. That doesn't help you, but just to say I've seen no issues so far..
My Aukey randomly fast charge. Just did plug and unplug until shown fast charge.

Is quick charge 3.0 supported?

Hi just curious if the Qualcomm quick charge 3.0 is supported by the device.
Super charge is obviously supported - tested graduately increasing from [email protected] all the way to [email protected] while it says super charging
Power delivery I've tested its working fine, [email protected] while it says quick charging.
But I got no quick charge charger at the moment to test, can some one test and confirm a quick charge charger please? Does it recognize it? What power it gets?
Thanks
P.S:
Also tested different cables for the super charging:
It will recognize the super charging much slower than original cable (which says super charge immediately), and it will only go up to [email protected], fyi..
It might write super charge, but it actually is charging 18w rather than 40 (38)w.

Slow charging issue.

I am posting here for first time. This issue was present when I got this device then one day I flashed ancient os rom and elinder kernel . Surprisingly my device started charging fast full in about 2 hours. After that I changed the rom to colt os 6.0 without elinder kernel. Same full charge in 2 hours . After few random reboots and about a weeks usage I decide to install evolution X for which I took the usb out of the charger and put it in my laptop to transfer the file. After flashing I put it back in the charger and checked charging current it was around 300-400ma about 4% charge in 10 mins. I restored my backup but no avail. Then I flashed havoc os 3.5 I get 4%/10 mins but after I install ancient os I get around 32%/ hour . If please anyone would help me it would mean a lot thanks . And I really hate 4 hours charging time.
I'm aslo stucked:highfive:
Try charging with original charger and USB cable, if you are already charging with original one try with different USB and charger.
See if there is any lint or dust in charging port or USB cable that may also slow downs the charging.
Try flashing elinder kernel again.
Clean flash again (do backup everything)
And lastly it might be related to battery since device is already 4 years old(not sure about your device's age). lithium ion battery does degrade over time so that might be causing slow charging.
sometime i do also get slow charging but thats related to USB cable in my case, i need to adjust USB in specific direction to charge fast. but weird thing is i use same USB and charger in other devices and it charges with good speed without any USB adjustments.
Fix
If any one is wondering if i fixed the issue yes i did seems that if i use a 9v 1.5a charger the phone charges to 90% in 1 hour 40 min on ancient os 3.5. using any other charger delivers only about 800ma and my phone charges in 3 hours. I have also tried samsung a71 28 watt charger but the phones does not charge even 1% in 5 minutes using that charger.
LoadOP2 said:
If any one is wondering if i fixed the issue yes i did seems that if i use a 9v 1.5a charger the phone charges to 90% in 1 hour 40 min on ancient os 3.5. using any other charger delivers only about 800ma and my phone charges in 3 hours. I have also tried samsung a71 28 watt charger but the phones does not charge even 1% in 5 minutes using that charger.
Click to expand...
Click to collapse
Kenzo is strictly made for 5V 2A charging. If u keep on using high volt charger then u will blow diode on charging board and will stop charging.

Categories

Resources