Related
Some Custom OS Like Lineage OS, Evolution X, etc. have a common problem - Error in Single Reception.
To fix Follow the following Steps -
DISCLAIMER - I am not responsible if any damage occurs.
1) Flash Magisk Root Manager.
2)Open Magisk Manager and Download and Install given Modules
- Riru (Riru - Core)
- Riru - EdXposed
**REBOOT**
3)Open EdXposed Manager (You will be redirected to Github to download the latest apk), Go to Modules and Enable EdXposed Manager.
**REBOOT**
4)Open EdXposed Manager, Go to Downloads, and Search LTE Mobile Signal Fix.
5) Download, Install and Activate the module in Modules Menu
**REBOOT**
And that's it.
NOTE -> This Method Currently works on Android 9.
**Android 10 Coming Soon**
Youtube Channel - https://www.youtube.com/channel/UCfgOffADDHCh7dOxUeB4NRQ
Video to install EdXposed - https://youtu.be/MezpjCoDRVQ
crDroid 6.11
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
crDRom is a project which based on crDroid with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches exclude one low level change: by default exist file /system/phh/secure (for Google Certification PASS), so if you can boot LineageOS GSI, but can't boot crDRom - try to removing that file
UPDATE VERSION
base: crDroid 6.11
latest build: 2020.10.19
treble patches: v222+
SPL: 5 Oct 2020
FEATURES/CHANGES
• no in-built root
• changed Phh Settings "Main Icon"
• and Phh Settings moved to the bottom
• mobile networks on MTK should work
• tuning of the status bar, icons more tightly to each other
• added option to set statusbar icons spacing (need reboot to properly apply changes)
• fixed the display of the status of security patches (GSI specific)
• now some pre-installed Apps can be disables from Settings
• fixed offline charger to works in enforced mode (still not for all devices)
• fixed call recording in Dialer (not supports on all devices)
• deep sleep fix included (based on patch by @Hami_Do)
• on battery saver auto dark mode disabled, you can choice light/dark theme
• fixed QS tiles editor (don't followed columns number)
• slightly fixed system UI theme (QS tiles h-padding, search bar in Settings etc)
• few changes to reduce consumed resources - more space, more speed, more battery life
• in stock camera removed HAL3 green artefacts which exist on few Xiaomi devices
• disabled some disputable Google components, for sample is fixed overall WiFi speed in the aggregate with GPS + Bluetooth
• on my device (with stock vendor) Google Play certification passed without any patches and Magisk, just works out-of-the-box
• option to set system UI optimization level (use careful, do not set IPS level for OLED)
• fixed DeskClock widget (with the GoogleSans font was cropped)
• turned off the indicator flashing when the battery level is low
• added option "Swipe for notifications" for fingerprint scanner
• in Dialer added option to set fullscreen contact's photo
• reworked dark mode support for few apps (Files, Calculator, DeskClock)
• replaced apps: Gallery, Dialer, Messaging, Calculator, Keyboard
• French and Russian translations for crDRom custom settings
• for Mi A2 Lite LTE is set by default
• used Bromite webview
• updated Redmi 6 Pro overlay
• removed Updater (useless in GSI)
• fixed boot on Mi 10 (Lite), K30 (Pro)
• major interface speed improvements
• tweaks for Xiaomi Redmi Note 9 'merlin' (audiojack, brightness, fp touches)
• changed minimal brightness level for Redmi Note 8 Pro
• initial Redmi 9 'galahad' overlay
• added DT2W support for QIN 2
• by default enabled LiveDisplay
• added custom Google Cloud restore option (Settings > Accounts)
• added few patches from GrapheneOS
*grayed options not realized yet
DOWNLOAD (CLICK H3RE)
vanilla, gapps: all architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
so in most common example "arm64_avN" is ARM64 A-only vanilla with no superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on all Q GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally; problems with GPS etc etc)
NOTE: always test ROM first without Magisk (with clean boot.img). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson, @AndyYan
projects: TrebleGSI • BlissROMs • LineageOS • Havoc-OS • GrapheneOS
re
Screenshots v222
Call quality is fairly bad on this
TheUndertaker21 said:
Call quality is fairly bad on this
Click to expand...
Click to collapse
you are the 1st man, who reported this
nobody in my tg group said about bad call quality
can you describe it, and which your device and vendor/kernel
An amazing rom. It has some downs on my device though. I'm using a device named Vestel Venus E4, you've probably never even heard about it. It has quad core cpu and 2 gigs of ram. On my device, this rom is a bit laggish. I mean it's fast but the transitions and the animations aren't smooth no matter how much I play with the animation scales on developer settings. Here is the other info that you may need about my device. I don't even want to change this rom maybe with some updates it will become smoother Thanks for this great job man
Etsyo said:
An amazing rom. It has some downs on my device though. I'm using a device named Vestel Venus E4, you've probably never even heard about it. It has quad core cpu and 2 gigs of ram. On my device, this rom is a bit laggish. I mean it's fast but the transitions and the animations aren't smooth no matter how much I play with the animation scales on developer settings. Here is the other info that you may need about my device. I don't even want to change this rom maybe with some updates it will become smoother Thanks for this great job man
Click to expand...
Click to collapse
well, try to add this line to the /system/build.prop
debug.sf.latch_unsignaled=1
or set this prop with adb/terminal with command
setprop debug.sf.latch_unsignaled 1
if this will fixed lags then send me result of commands
getprop ro.vendor.build.fingerprint
getprop ro.vendor.product.device
eremitein said:
well, try to add this line to the /system/build.prop
debug.sf.latch_unsignaled=1
or set this prop with adb/terminal with command
setprop debug.sf.latch_unsignaled 1
if this will fixed lags then send me result of commands
getprop ro.vendor.build.fingerprint
getprop ro.vendor.product.device
Click to expand...
Click to collapse
My device isn't rooted :/ And I couldn't figure out how to do this over adb shell in recovery mode. Could you give me some instructions?
You make the best gsis ?
Etsyo said:
My device isn't rooted :/ And I couldn't figure out how to do this over adb shell in recovery mode. Could you give me some instructions?
Click to expand...
Click to collapse
you can run all prop commands from adb without root, but not in recovery. just boot gsi and connect you phone to the pc and allow it to debug
then run on PC "adb shell" and run commands, which i gave
Just installed the GSI on my Oneplus Nord, runs buttery smooth, auto-brightness broken tho. Thanks
eremitein said:
you can run all prop commands from adb without root, but not in recovery. just boot gsi and connect you phone to the pc and allow it to debug
then run on PC "adb shell" and run commands, which i gave
Click to expand...
Click to collapse
I'm getting "device unauthorized" error on adb commands. No matter what I tried I couldn't get past it. I even tried a different computer which I haven't even used before but the problem still persists. I'm using your LEVEL 6 (IPS) setting on UI Speedup/Powersaving option under Display Settings. I think it's not bad for now but can you explain what those levels are? Because I couldn't find an explanation...
eremitein said:
you are the 1st man, who reported this
nobody in my tg group said about bad call quality
can you describe it, and which your device and vendor/kernel
Click to expand...
Click to collapse
I've tried many times to install crdroid, pixel experience and evolutions gsi but they all got stuck at bootanimation but other gsi like havoc and aosp work really good and boot up in 2 minutes please somebody guide me what's really happening
Moto G5s Android P Lineage OS 16 Vendor (there is no OEM Vendor):
#Bug
Using the edit panel option from the QS Panel breaks SystemUI (tiles don't do nothing, sudden lag spikes, crashes)
Restarting the device, or restarting SystemUI solves the issue, but trying to edit again breaks it again
@eremitein
Update:
Doesn't happen on Vanilla builds
Update 2:
Always happens with any Gapps installed (opengapps in this case)
Btw, is there any particular reason any optimization level above 2 makes the launcher become square?
Like the animations and recents panel?
Can I use this on my unlocked Huawei MediaPad T 5
its a Kirin 659? its only 8.0 vndk 26. (Legacy version)
I am currently on Los 16 from openkirin.
Thanks
Some random said:
Btw, is there any particular reason any optimization level above 2 makes the launcher become square?
Like the animations and recents panel?
Click to expand...
Click to collapse
it's normal
micbanand said:
Can I use this on my unlocked Huawei MediaPad T 5
its a Kirin 659? its only 8.0 vndk 26. (Legacy version)
I am currently on Los 16 from openkirin.
Thanks
Click to expand...
Click to collapse
i don't know
eremitein said:
it's normal
Click to expand...
Click to collapse
Oh, hmm...
Update (2020.09.30)
crDroid 6.10
September SPL
removed Updater (useless in GSI)
fixed boot on Mi 10 (Lite), K30 (Pro)
major interface speed improvements
reworked Speed UI overlays
have ARM A-only Go (1.5+Gb)
default AOSP bootanimation (for more generic)
Bromite WebView 85.0.4183.110
DOWNLOAD //all architectures
BootleggersROM 5.2
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
qiDroid is a project which based on BootleggersROM with @phhusson's Treble GSI patches. Built without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches exclude one low level change: by default exist file /system/phh/secure (for Google Certification PASS), so if you can boot AOSP or LineageOS GSI, but can't boot qiDroid - try to removing that file
UPDATE VERSION
latest build: 2020.10.21
treble patches: v222+
SPL: 5 Oct 2020
FEATURES/CHANGES
• no in-built root, activated SafetyNet tweak
• Phh Setting moved to bottom of all settings (please don't be scare)
• in default launcher added double tap for screen-off gesture
• added 0.2x, 0.8x and 1.2x to the animation speed selection menu
• by default set 0.8x animation speed
• fixed cropped by edges status bar (GSI specific)
• disabled "Customize your Pixel device" and other annoying suggestions
• tuning status bar, icons more tightly to each other
• fixed error when uninstalling some programs (when plugged SD-card with vFAT FS)
• added option "Swipe for notifications" for fingerprint scanner
• few changes to reduce consumed resources - more space, more speed, more battery life
• disabled some disputable Google components, for sample is fixed overall WiFi speed in the aggregate with GPS + Bluetooth
• on my device (with stock vendor) Google Play certification passed without any patches and Magisk, just works out-of-the-box
• added options to set system UI optimization level, test them manually on your device for speed/battery improvements (use careful, do not set IPS level for OLED)
• Gapps variants: used normal webview (no errors to installing Chrome), stock launcher with Google Feed (and without crappy search bar)
• Dialer from CAOS: option to set fullscreen contact's photo, small theme fixes, translations, call recording (not supports on all devices)
• replaced apps: Gallery, Keyboard, Dialer, Messaging, Contacts, Calculator - all supports dark theme
• on battery saver auto dark mode disabled, you can choose light/dark theme
• fixed offline charger for some devices (mostly Qualcomm, few MTK)
• in stock camera removed HAL3 green artefacts which exist on some Xiaomi devices
• fixed status info of security patches (GSI specific)
• removed ugly divider lines in Settings UI (not all of them)
• updated Redmi 6 Pro overlay
• for Mi A2 Lite LTE is set by default
• added USB-tethering QS tile
• Bromite webview
• fixed notch hider (GSI specific)
• lock icon disabled
• OOS style switches
• enabled LiveDisplay by default
• fixed boot on Mi 10 (Lite), K30 (Pro)
• added Russian translation (more than 95%)
• tweaks for Xiaomi Redmi 9 'lancelot' and Redmi Note 9 'merlin' (audiojack, brightness, fp touches)
• changed minimal brightness level for Redmi Note 8 Pro
• initial Redmi 9 'galahad' overlay
• added DT2W support for QIN 2
• added custom Google Cloud restore option (Settings > Accounts)
*grayed options not realized yet
DOWNLOAD (CL1CK HERE)
vanilla, gapps: all architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
so in most common example "arm64_avN" is ARM64 A-only vanilla with no superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on all Q GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally; problems with GPS etc etc)
NOTE: always test ROM first without Magisk (with clean boot.img). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson
projects: TrebleGSI • BlissROMs • crDroid • PixelExperience • ION • neon-OS • Havoc-OS • LineageOS • Evolution-X • LiquidRemix • ExtendedUI • GrapheneOS • abc rom
re
2re
eremitein said:
2re
Click to expand...
Click to collapse
Ty ty
TYTY!Bootleggers is my favorite ROM and I couldn't wait for a Q GSi!
Update (2020.08.23)
same base and treble patches
added option to set statusbar edges padding
fixed cropped font in network traffic monitor
fixed SELinux status info (GSI specific)
DOWNLOAD //all architectures
Ok one question my phone can't read .xz how to flash with twrp
Aulgreg38 said:
Ok one question my phone can't read .xz how to flash with twrp
Click to expand...
Click to collapse
Something called extracting...
Op3t
I understand that but my pc says the files corrupt and won't open it?? If u could tell me if I must change settings in pc to fix that???
Aulgreg38 said:
I understand that but my pc says the files corrupt and won't open it?? If u could tell me if I must change settings in pc to fix that???
Click to expand...
Click to collapse
Zarchiver app in Google Play Store:
https://play.google.com/store/apps/details?id=ru.zdevs.zarchiver
Op3t
Thank u so much I'm not quite a pro at the pc yet
Aulgreg38 said:
I understand that but my pc says the files corrupt and won't open it?? If u could tell me if I must change settings in pc to fix that???
Click to expand...
Click to collapse
use PeaZip next time very nice extractor on win
Ty for this bootleggers, really smooth. But i get adb unauthorized tho. I see official bootleggers update their base to 5.2 hope it will come to qidroid with September spl. Thanks
alvinprimo said:
Ty for this bootleggers, really smooth. But i get adb unauthorized tho
Click to expand...
Click to collapse
try disable & enable adb debugging in developer settings
or use that
[ if rom not allowing adb (device unauthorized) ]
0. reboot to twrp
1. connect phone to the PC
2. run command from
*nix: adb push ~/.android/adbkey.pub /data/misc/adb/adb_keys
windows: adb push C:\Users\%PutHereYourUsername%\.android\adbkey.pub /data/misc/adb/adb_keys
eremitein said:
try disable & enable adb debugging in developer settings
or use that
[ if rom not allowing adb (device unauthorized) ]
0. reboot to twrp
1. connect phone to the PC
2. run command from
*nix: adb push ~/.android/adbkey.pub /data/misc/adb/adb_keys
windows: adb push C:\Users\%PutHereYourUsername%\.android\adbkey.pub /data/misc/adb/adb_keys
Click to expand...
Click to collapse
Thanks for the tip, but I get no such file (or folder) output, what's wrong? I use minimal adb/fastboot on windows. Btw why you're not upload new qidroid build here? Thank for the you're Smith rom
Update (2020.09.29)
BootleggersROM version 5.2
merged September SPL missing patches
added few patches from GrapheneOS
enabled LiveDisplay by default
fixed boot on Mi 10 (Lite), K30 (Pro)
added Russian translation (more than 95%)
have ARM A-only Go (1.5+Gb)
reworked Speed UI overlays
default AOSP bootanimation (for more generic)
Bromite WebView 85.0.4183.110
DOWNLOAD //all architectures
Thanks so much for this rom, very stable and with nice options!
I noticed that after flashing the rom (arm64-bvn) my system partition with 3 GB size shows a file system size of about 1.8 GB, so to be able to flash open gapps afterwards I had to use the TWRP option "resize file system" to get the full size back. As this is my first GSI-rom, can you briefly explain why the file system size is shrinked during installation? Thank you.
retora said:
Thanks so much for this rom, very stable and with nice options!
I noticed that after flashing the rom (arm64-bvn) my system partition with 3 GB size shows a file system size of about 1.8 GB, so to be able to flash open gapps afterwards I had to use the TWRP option "resize file system" to get the full size back. As this is my first GSI-rom, can you briefly explain why the file system size is shrinked during installation? Thank you.
Click to expand...
Click to collapse
GSI system have possible minimal size, it's not a specific rom for your device only which shoild be support full size of partition. so yes it's normal when you need resizing
eremitein said:
GSI system have possible minimal size, it's not a specific rom for your device only which shoild be support full size of partition. so yes it's normal when you need resizing
Click to expand...
Click to collapse
Great Job Great ROM thank You
Update (2020.10.21)
latest phh treble patches
latest BootleggersROM 5.2 sources
up to October SPL (really, all mandatory patches came in September)
this release with "secure" file and without su/Superuser (most people voted)
tweaks for Xiaomi Redmi 9 'lancelot' and Redmi Note 9 'merlin' (audiojack, brightness, fp touches)
changed minimal brightness level for Redmi Note 8 Pro
initial Redmi 9 'galahad' overlay
added DT2W support for QIN 2
added custom Google Cloud restore option (Settings > Accounts)
Bromite WebView 85.0.4183.110 (newest version have bug when downloading something)
DOWNLOAD //all architectures
BlissROMs 14.2
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
BLESS 11 is a project which based on BlissROMs 14.x with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method), and in the Recovery do Wipe Data or Factory reset
UPDATE VERSION
base: BlissROMs 14.2
latest build: 2021.05.02
treble patches: v306
SPL: 5 April 2021
FEATURES/CHANGES
see Project page changelog
DOWNLOAD (CLICK H3RE)
vanilla, gapps, go-gapps: all possible architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
Z = dynamic superuser included
-lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)
so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on all R GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally etc etc)
NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson, @AndyYan, @electrikjesus
projects: TrebleGSI • BlissROMs • crDroid • LineageOS • Havoc-OS • GrapheneOS • ABC rom • PixelExperience • SyberiaOS • Evolution-X
reserved_one
reserved_two
awesomeness
Excelent work
This gsi smooth and stable, but i guess bliss team not put all cuztomise setting yet. And they change from lineage to aosp with this version
Hi folks, as you maybe know all my GSI works suspended
Build server damaged and now for maintenance, I haven't information about his further fate
So... I don't know when I can resume my GSI building
By the way, this is not my server, literally I can't do anything to help
I can't even send money, my country is not supported in many payment systems
If you want to help, you can send donations to https://www.paypal.com/paypalme/electrikjesus
(he is the owner of the server, and he long gives me his server - I made a lot of GSI builds on it)
I have a Blackview BV9600E phone, and ROM file "bless-v306-210502-arm64-bgZ.img" runs perfect.
Only has a little thing that was aviable on previous revision: LED NOTIFICATIONs has no control, so I must install a led control APK from Google PlayStore (LIGHT FLOW).
Also, System Camera is very poor, but runs perfectly.
The problem I cannot solve is aviable Gpaid to use NFC, because it detects "non original ROM", because I think I have not rooted system.
We are expecting new revision (Like Samsung has yet new beta).
Many thanks.
juandi34 said:
The problem I cannot solve is aviable Gpaid to use NFC, because it detects "non original ROM", because I think I have not rooted system.
Click to expand...
Click to collapse
try this:
SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
eremitein said:
try this:
SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
Click to expand...
Click to collapse
Also, there is another problem I have missed on the last message:
Call Recording options does not appears on this rom.
I must install an APK to record it (using ROOT to works fine).
But 4PDA friends, tell me that it must appears on this rom: What´s happend ?
juandi34 said:
Also, there is another problem I have missed on the last message:
Call Recording options does not appears on this rom.
I must install an APK to record it (using ROOT to works fine).
But 4PDA friends, tell me that it must appears on this rom: What´s happend ?
Click to expand...
Click to collapse
call record should 100% works only with AOSP Dialer, not with Google one
eremitein said:
call record should 100% works only with AOSP Dialer, not with Google one
Click to expand...
Click to collapse
How can I install AOSP Dialer ????
It is not included in the ROM file, because I cannot see
Is it on a patch file to patch via TWRP ???
I have found it on https://github.com/A2HI2H/Aosp_Dialer_With_Call_Recording
... may I install via TWRP this version and may works 100% ???
Thank you.
eremitein said:
try this:
SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
Click to expand...
Click to collapse
It doesn´t works.
I try and the error is keep going.
juandi34 said:
How can I install AOSP Dialer ????
It is not included in the ROM file, because I cannot see
Is it on a patch file to patch via TWRP ???
Click to expand...
Click to collapse
it's included in the vanilla rom build
(but some gapps can override it)
also in gappsed build there is Google dialer
juandi34 said:
It doesn´t works.
I try and the error is keep going.
Click to expand...
Click to collapse
sad, is it works in the another gsi?
eremitein said:
sad, is it works in the another gsi?
Click to expand...
Click to collapse
It works in the original ROM.
eremitein said:
it's included in the vanilla rom build
(but some gapps can override it)
also in gappsed build there is Google dialer
Click to expand...
Click to collapse
So:
Do you think, if I install from:
https://sourceforge.net/projects/nikgapps/files/Releases/Addons-R/27-Jun-2021/ the NikGapps-Addon-11-GoogleDialer-signed.zip file, it may works ???
juandi34 said:
So:
Do you think, if I install from:
https://sourceforge.net/projects/nikgapps/files/Releases/Addons-R/27-Jun-2021/ the NikGapps-Addon-11-GoogleDialer-signed.zip file, it may works ???
Click to expand...
Click to collapse
no, it's Google dialer
juandi34 said:
So:
Do you think, if I install from:
https://sourceforge.net/projects/nikgapps/files/Releases/Addons-R/27-Jun-2021/ the NikGapps-Addon-11-GoogleDialer-signed.zip file, it may works ???
Click to expand...
Click to collapse
no, it's Google dialer
-------------------------------
eremiteinCan you share in this forum the correct APK or ZIP to install via APK or TWRP ???
juandi34 said:
no, it's Google dialer
-------------------------------
eremiteinCan you share in this forum the correct APK or ZIP to install via APK or TWRP ???
Click to expand...
Click to collapse
which apk?
I have a pull request open for this overlay but until a new phh GSI comes out, you can flash it via Magisk Manager.
It does add a functional auto brightness. I'm running it with Pixel Experience Plus GSI.
Magisk Module here.
https://file.io/MSfnCRY65ESX