General [SHARED] Pixel Experience Plus v11 - Xiaomi Mi 11 Lite 5G

To be claim, i am NOT the maintianer.
Today, i want to share a GSI for every use of this phone and try to give everyone the lightest feeling of system to match the weight of this phone. So after hunders of fastboot flash, i succeesfully boot in system after flash, hope everyone can try and if any issue, you can commit this thread or pull a issue to this gsi github.
CLICK Guthub TO DOWNLOAD the "PixelExperience_Plus_arm-ab-11.0-xxxxxxxx-UNOFFICIAL.img.xz"
Three steps to flash:
1,Backup all your data and unzip the file you downloaded from github BTW.
2,If you want to get Magisk, flash Magisk before you flash PE. Without flash new bootimg, Magisk will be permanent.(option)
2,connect to computer and use command <adb reboot fastboot> or press vol- and power to rebbot to the fastboot mode.
3,use command<fastboot flash system xxx.img> to flash PEPlus, <fastboot reboot> to boot into system.
BTW, I am the people who are not native speakers of English, so if i use some wrong word, just let it go if didn't confuse you.
Hope you success.
If feedback of this rom is good, i will base on it to maintain the ROM that only for Mi11 Lite.

Thanks!
Do you mean Mi 11 Lite or Mi 11 Lite 5G??

vanpopel said:
Thanks!
Do you mean Mi 11 Lite or Mi 11 Lite 5G??
Click to expand...
Click to collapse
I flash it on my Mi 11 Lite 5G and it work.

Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
Thanks

So i need to download all the available img(or which one spesific) and flash them in fastboot mode and reboot system?
No need anything else right?
After boot i assume i can install magisk 23.0 apk and flash boot img created before throught fastboot right?
Is thats correct?
@ZeroSherd

rayman95 said:
Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
Thanks
Click to expand...
Click to collapse
Download ab version.
I don't think we con debolat it before flash
And yes it will wipe all your data.

paatha13 said:
So i need to download all the available img(or which one spesific) and flash them in fastboot mode and reboot system?
No need anything else right?
After boot i assume i can install magisk 23.0 apk and flash boot img created before throught fastboot right?
Is thats correct?
@ZeroSherd
Click to expand...
Click to collapse
You just need to download the ab verison and flash it by the command that i provide. If you need to flash magisk, i sugguest you patch the boot.img before you flash, and after the first boot you go to fastboot again to flash boot_ab that patched boot.img.

ZeroSherd said:
Download ab version.
I don't think we con debolat it before flash
And yes it will wipe all your data.
Click to expand...
Click to collapse
Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....

rayman95 said:
Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....
Click to expand...
Click to collapse
I did finding a way to get R/W according to patch the ROM without TWRP

ZeroSherd said:
You just need to download the ab verison and flash it by the command that i provide. If you need to flash magisk, i sugguest you patch the boot.img before you flash, and after the first boot you go to fastboot again to flash boot_ab that patched boot.img.
Click to expand...
Click to collapse
Thanks but where can i found boot.img of pe plus?
Can you provide it.
@rayman95 did you flash it ,all ok ,can provide some screenshot of the rom.

paatha13 said:
Thanks but where can i found boot.img of pe plus?
Can you provide it.
@rayman95 did you flash it ,all ok ,can provide some screenshot of the rom.
Click to expand...
Click to collapse
Of course, i will upload it to NETDISK after i finish my OT work that i may need half or A day to done it.

no, not yet....not sure to flash it right now, because I don't want to wipe my phone now....and I don't like gapps...I would love to have a recovery to flash nogoolag ur ULNP only and to do light rom

rayman95 said:
no, not yet....not sure to flash it right now, because I don't want to wipe my phone now....and I don't like gapps...I would love to have a recovery to flash nogoolag ur ULNP only and to do light rom
Click to expand...
Click to collapse
I think you can use ADB command or software to disable those GAPPS.

How do I backup the data if there is no custom recovery available?

In_a_state said:
How do I backup the data if there is no custom recovery available?
Click to expand...
Click to collapse
I highly recommand the TitaniumBackup if you got ROOT, or use MIUI backup which inside the settings.

Screenshot,feedback from the rom??
I would expect more interest for the first custom rom on this device

What's the way to go back to stock if got issues on PE???
Thanks

paatha13 said:
Screenshot,feedback from the rom??
I would expect more interest for the first custom rom on this device
Click to expand...
Click to collapse
Think most people are waiting on a working twrp recovery.

rayman95 said:
What's the way to go back to stock if got issues on PE???
Thanks
Click to expand...
Click to collapse
i didn't try, but i think just need to flash Xiaomi.eu ROM. By the "windows_fastboot_xxx" which in the ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ZeroSherd said:
i didn't try, but i think just need to flash Xiaomi.eu ROM. By the "windows_fastboot_xxx" which in the ROM.View attachment 5323491
Click to expand...
Click to collapse
where do you get this???
here what I have from last EU fastboot rom...

Related

[GUIDE] Decrypt Android 11 MIUI rom on POCO X2/Redmi K30

I will tell u the steps to properly decrypt android 11 miui stable or latest xiaomi.eu rom of Poco X2
Backup everything to PC .... U will need to format data...... try Migrate app for app backup.....
REQUIREMENTS:
1. Windows PC with minimal adb & fastboot to hotboot recovery
2. system_rw.zip , decrypt.zip and magisk 22.zip (optional).
3. Latest Android 11 Miui global stable or xiaomi.eu rom installed poco x2 or redmi k30 device.
4. Official TWRP installed & twrp.img for hotbooting
STEPS:
1. Make sure you are in latest android 11 miui global stable or xiaomi.eu rom.. Download all files and Store in computer. Transfer system_rw.zip to phone.
2. U will need to boot to bootloader and load recovery by using
fastboot flash recovery twrp.img
fastboot boot twrp.img
Hotbooting recovery allows to decrypt data with password. ( You dont need to hotboot recovery on latest xiaomi.eu beta.. it supports twrp decryption. Just reboot to recovery)
3. Download latest SystemRW from official thread (link below) & install it according to official instructions... Reboot device...
4. Hotboot to twrp recovery again using fastboot boot twrp.img and got to wipe and format data...... and reboot to recovery.... connect to pc and copy decrypt.zip to phone and go to mounts and mount odm and flash decrypt.zip (optional : Flash magisk or delete install_recovery.sh from /etc if on miui global stable to prevent twrp getting replaced by stock recovery)
5. Reboot....
Now you have a decrypted data partition.....
You have to repeat this steps everytime you flash a new rom but you dont need to hotboot recovery as you have decrypted data....
Tested only in MIUI Roms... This method Should work in All Android 11 roms...
Source Links:
Decrypting Tool
makeSystemRW
TWRP for POCO X2
Magisk
Minimal Adb & Fastboot
Migrate App
Decrypted latest Xiaomi.eu beta 21.4.1 Rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi
I want thank you for the hard work
I did every step but still did not work with my Poco X2
I will attach the screenshots
I hope you can help me
Somo22 said:
Hi
I want thank you for the hard work
I did every step but still did not work with my Poco X2
I will attach the screenshots
I hope you can help me
Click to expand...
Click to collapse
Sry missed a step... U need to wipe data before flashing decrypt zip ... Edited the tutorial
saginesht said:
Sry missed a step... U need to wipe data before flashing decrypt zip ... Edited the tutorial
Click to expand...
Click to collapse
Thanks for your reply, but did you see the screenshot No.4, the installation of system_rw.zip was successful
but at the same times the partition details saying failed to mount system, vendor, product (Invalid argument) So is this an error or its normal ?
Edit: I did wipe and format data before flash decrypt.zip but when I reboot to recovery it was the stock recovery not TWRP
Edit 2 : finally I successes to decrypted my phone and the error (partition details failed to mount system, vendor, product (Invalid argument) also gone by using orange fox recovery and rename it to twrp I did same as your steps but after I did format for data I had to fastboot boot twrp.img again since my phone keeps reboot to the stock recovery after that I copy decrypt.zip to phone and mount odm then flash decrypt.zip
Hi dear...can we use this method for mi10t
zeestats said:
Hi dear...can we use this method for mi10t
Click to expand...
Click to collapse
U can try .... Keep a pc ready incase something goes wrong
saginesht said:
U can try .... Keep a pc ready incase something goes wrong
Click to expand...
Click to collapse
Rw zip is not working for me any reason?
zeestats said:
Rw zip is not working for me any reason?
Click to expand...
Click to collapse
Try latest one from Here
saginesht said:
Try latest one from Here
Click to expand...
Click to collapse
Not working the new one also....
zeestats said:
Not working the new one also....
Click to expand...
Click to collapse
Try with a different twrp
saginesht said:
Try with a different twrp
Click to expand...
Click to collapse
Could you send me the link?
zeestats said:
Could you send me the link?
Click to expand...
Click to collapse
Search in your forum / support group
There is a problem with the WiFi connection, I can not connect to any WiFi unless I turn on a WiFi hotspot then I can connect Do you have a suggestion to solve this problem, and all partion in twrp it's showing 0
thank you very much
There is a problem with the WiFi connection, I can not connect to any WiFi unless I turn on a WiFi hotspot then I can connect Do you have a suggestion to solve this problem, and y all partion showing 0 thank you very much
Yeslam7 said:
There is a problem with the WiFi connection, I can not connect to any WiFi unless I turn on a WiFi hotspot then I can connect Do you have a suggestion to solve this problem, and y all partion showing 0 thank you very muchView attachment 5355733View attachment 5355735
Click to expand...
Click to collapse
Rom version... Twrp version?
Hello, thank you very much for the great work
I solved the problem by installing the orange fox recovery and clearing the data and everything was fine. I think the problem is twrp
Yeslam7 said:
Hello, thank you very much for the great work
I solved the problem by installing the orange fox recovery and clearing the data and everything was fine. I think the problem is twrpView attachment 5356411
Click to expand...
Click to collapse
Hi @saginesht. Thanks for your interest in my SystemRW project.
You can always find the latest version of my script at official SystemRW project page
Great news! New version of SystemRW coming soon! Stay tuned...

General [SHARED] [TWRP] [haydn] TWRP Recovery for K40 Pro +

*************************************************************
———————— TWRP for K40 Pro + ——————————-
*************************************************************
WARNING : I do not know who made this TWRP and i am NOT taking credit for it. Someone in my group chat found it. It's apparently from China. If you are the creator , PM Me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS
1) Download TWRP for K40 Pro + , and put it in your fastboot folder.
2) Put your phone into fastboot mode.
3) Do the following command : fastboot boot twrp-recovery-venus. It will automatically boot into TWRP.
4) Change language to English (press the 6th option).
5) Go to "Advanced" and select "Onekey inject TWRP".
6) Swipe to inject the TWRP. It might take a few minutes, so don't worry.
_____________________________________________________________________
Note: Don't change the boot slot (Slot A) or maybe will not boot at all.
Tested by @mslezak
______________________________________________________________________
Bugs: ADB Sideload is broken.
_______________________________________________________________
If you find any bug, feel free to report it down below.
Credits to @Cozzmy13 for decrypting the TWRP image! Here's the summary of events :
1) Chinese TWRP gets leaked onto my Telegram chat.
2) The recovery image is encoded and requires a dodgy chinese tool to decode it.
3) @Cozzmy13 finds a way to decode the image and make it bootable .
4) Me and Augustin El Metralleta try flashing the image, and we find out it works.
Does it suitable for K40 Pro? Did anyone try? Thanks!
K40 Pro has the same guts except the camera main and 12gb RAM so it should work
I verified a backup up image today restored worked although there wasn't much data on it. i always boot it. One time the injection made me have to use a fastboot ROM (always try deleting data first).
Have only one doubt can this twrp able to flash official china beta recovery rom for mi 11X pro?
#Update
I have flashed this twrp and it successfully booted without any issues and i have dirty flashed china beta recovery rom over chi a stable rom amd rom got flashed successfully without any issues.
But we need to flash the twrp every time when we reboot device.
cherri said:
How to make the twrp permanent then?
Click to expand...
Click to collapse
You can try to flash magisk after flashing the twrp, i'm still waiting the 7 days to unlock the bootloader so i can't try right now. If i remember correctly magisk has something that blocks "recovery-from-boot" and prevents twrp from being overwritten.
I think for now it is not possible are els he would have mentioned flashing process here instead of twrp temporary boot process, so we need to wait few more days unless someone does some miracle.
cherri said:
I think for now it is not possible are els he would have mentioned flashing process here instead of twrp temporary boot process, so we need to wait few more days unless someone does some miracle.
Click to expand...
Click to collapse
What do you mean. After flashing, TWRP was persistedm. I was also able to flash Magisk with this TWRP.
Go to "Advanced" and select "Onekey inject TWRP".
I wonder why there isn't any available tutorial on flashing twrp for this device on google, YouTube. What do you think guys?
thanks for the dev xinkid520 a chinese dev
It is indeed effective after testing, very good!
bouyhy01 said:
thanks for the dev xinkid520 a chinese dev
Click to expand...
Click to collapse
yeah he made it, but encrypted it and sold it for money.
so people from telegram decrypted it
zls8635878 said:
It is indeed effective after testing, very good!
Click to expand...
Click to collapse
So can we use this twrp permanently?
Can you tell me the steps if so?
DestroYerr said:
So can we use this twrp permanently?
Can you tell me the steps if so?
Click to expand...
Click to collapse
Go to "Advanced" and select "Onekey inject TWRP".
cherri said:
#Update
I have flashed this twrp and it successfully booted without any issues and i have dirty flashed china beta recovery rom over chi a stable rom amd rom got flashed successfully without any issues.
But we need to flash the twrp every time when we reboot device.
View attachment 5330171
Click to expand...
Click to collapse
I flashed this twrp into my phone. But when i try to install rom,recovery just flash and return to recovery again and ROM files got deleted. Could u tell me how u install this ROM?(PS my rom is (xiaomi.eu_multi_HMK40Pro_MI11i_V12.5.4.0.RKKCNXM_v12-11-fastboot)
Armstchi said:
I flashed this twrp into my phone. But when i try to install rom,recovery just flash and return to recovery again and ROM files got deleted. Could u tell me how u install this ROM?(PS my rom is (xiaomi.eu_multi_HMK40Pro_MI11i_V12.5.4.0.RKKCNXM_v12-11-fastboot)
Click to expand...
Click to collapse
Your rom version is for Fastboot, not Recovery.
k40 pro
majisk was installed.
I have a USB Memory Stick connected via an OTG cable, but I cannot mount it.
The usb format is FAT32. Please help someone.
cyaochai said:
k40 pro
majisk was installed.
I have a USB Memory Stick connected via an OTG cable, but I cannot mount it.
The usb format is FAT32. Please help someone.
Click to expand...
Click to collapse
Bro after flashing magisk, is safetynet okay?

[Recovery] SHRP for Lancelot and Galahad with gsi flash support

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#SHRP A10/11
Download : https://mega.nz/file/gpgWmBwa#MqToq4Htapb4cd-nwzcBNbpAbuBD_TREbPvK9bFHsmI
Features :
-f2fs support(flash f2fs patcher from tweaks section and convert data and catch(optional) to f2fs to use f2fs).Must use f2fs supposed Kernel.
-Can flash and backup system,vendor and product.
-You can flash gsi and ub port image directly.
-Can resize system and vendor partition to flash Large image size ..
(Flash system vendor resize zip from tweaks and reboot to recovery
-system, vendor, product rw support (flash system rw zip from tweaks section)
Notes :
-After resize you can flash system up to 3.4 gb and vendor up to 900 mb.
-Disable shrp theme to prevent bootloop.
-If you are in miui you need to flash patch vbmeta from below link.
http://transfer.sh/e3LV0n/unipatchedvbmeta_twrp.zip
Flash it after flash the recovery..
Install :
Download and flash from any recovery or extract and flash recovery.img from pc
Sorce (twrp tree) : https://github.com/Arafattex/device_xiaomi_lancelot
Screen shot :
What is the solution to the problem of returning the official recovery after a reboot? Knowing that I tried flashing the Magisk, but the phone does not turn on (bootloop)
Az.az1 said:
What is the solution to the problem of returning the official recovery after a reboot? Knowing that I tried flashing the Magisk, but the phone does not turn on (bootloop)
Click to expand...
Click to collapse
It never happened which version of magisk you flash ? is you are miui if yes flash patch vbmeta...
http://transfer.sh/e3LV0n/unipatchedvbmeta_twrp.zip
how to disable theme?
EDIT: nvm I got it, although installing Magisk v23 from official site does bootloop the phone.
Removing it solved it and got my phone boot.
Shas45558 said:
Il n'est jamais arrivé quelle version de magisk vous flashez ? est-ce que vous êtes miui si oui flash patch vbmeta...
http://transfer.sh/e3LV0n/unipatche...sh/e3LV0n/unipatchedvbmeta_twrp.zip
[/QUOTE]
Click to expand...
Click to collapse
http://1- thanks for your reply
2- I have the latest version of Magisk 23.0
3-I'm on the official ROM
4- The link you sent does not work
64Timothy121 said:
how to disable theme?
EDIT: nvm I got it, although installing Magisk v23 from official site does bootloop the phone.
Removing it solved it and got my phone boot.
Click to expand...
Click to collapse
Theme is disabled no need
64Timothy121 said:
how to disable theme?
EDIT: nvm I got it, although installing Magisk v23 from official site does bootloop the phone.
Removing it solved it and got my phone boot.
Click to expand...
Click to collapse
How did you remove it? I got a bootloop too after installing Magisk from SHRP and I can only go to fastboot, but when I flash SHRP again the bootloop is still there and it won't go into recovery anymore.
ecvarts said:
How did you remove it? I got a bootloop too after installing Magisk from SHRP and I can only go to fastboot, but when I flash SHRP again the bootloop is still there and it won't go into recovery anymore.
Click to expand...
Click to collapse
I reflashed and booted into the img, yet the phone actually booted into the system. I hit the combo for recovery and somehow I got back in this time and it says Magisk is installed. Weird... But if it works...
Could someone re-upload the vbmeta patch?
This link no longer works... https://transfer.sh/e3LV0n/unipatchedvbmeta_twrp.zip
Thank you very much!
+1 vbmeta_twrp link is not working
+1 I‘d like to use this rom,but can you give me another recovery link?tks
Here is the detailes guide to install This recovery.
Go to Fastboot mode
Run the following commands.
fastboot flash recovery recoveryname.img
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
In the recovery install SHRP img file
then install vbmeta_patched img file
then reboot to recovery
All files are attached.
Don't forget to click Thanks button
rakesh.aggarwal said:
Here is the detailes guide to install This recovery.
Go to Fastboot mode
Run the following commands.
fastboot flash recovery recoveryname.img
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
In the recovery install SHRP img file
then install vbmeta_patched img file
then reboot to recovery
All files are attached.
Don't forget to click Thanks button
Click to expand...
Click to collapse
Hello, I followed this procedure and my phone (Redmi 9) got stuck in a bootloop, I can't even get into fastboot anymore. I might be able to recover it using EDL however, but most likely I will have to send it to authorized repair. RIP.
Update: Not even the guy I sent the phone to repair could fix it, RIP.
zerowhy said:
Hello, I followed this procedure and my phone (Redmi 9) got stuck in a bootloop, I can't even get into fastboot anymore. I might be able to recover it using EDL however, but most likely I will have to send it to authorized repair. RIP.
Update: Not even the guy I sent the phone to repair could fix it, RIP.
Click to expand...
Click to collapse
I have attached the unbricking tool here. It worked for me. If you just chose the correct CPU architecture, it will work for any mediatek phone.
The above guide was for Shiva(Poco M2) not for Redmi 9.
Hmm.. I can't seem to flash the official firmware with this recovery. It just shows an error when flashing it. I am on PixelPlus UI 12.1.
MaxisMan said:
Hmm.. I can't seem to flash the official firmware with this recovery. It just shows an error when flashing it. I am on PixelPlus UI 12.1.
Click to expand...
Click to collapse
What kind of errors?
Sorry for a stupid question. But is Flash button has the same function as Install button when installing *.zip patch file? This is the 1st time I'm using this recovery

Question [HELP] Back to original ROM

Fist let me thank you for helped me successfully rooted this phone before https://forum.xda-developers.com/t/what-is-the-easiest-and-safest-way-to-root-redmi-note-10.4359843
But now some of my bank applications just refuse to run and magisk hide doesn't help and my first objective to root is not needed anymore plus some more inconvenient things from bugs now I want to go back to official MIUI ROM how can i do that?
There are plenty of guides show how to Install the custom ROM but i can't find one about go back the original.
Unlike the last time now i known the basic of recovery, flash, fastboot etc
But i still don't know how to "Completely" go back to the original MIUI ROM but also want to keep the OrageFox recovery just the ROM.
Can i just download the MIUI ROM from here https://xiaomifirmwareupdater.com/miui/mojito/stable/V12.5.4.0.RKGMIXM/ and flash the .zip file normally? But what about Recovery/Fastboot type? The fastboot type is twice as big as the recovery type but it's not the zip format guess i don't need that and stick to recovery/zip format right?
And what is Frimware https://xiaomifirmwareupdater.com/firmware/mojito/stable/V12.5.5.0.RKGMIXM/ do i also need to flash this too?
I'm currently on OrangeFox recovery and Sakura ROM (https://projectsakura.xyz/download.html)
Thank you.
You can't flash recovery miui with twrp/orangefox... in order to reinstall the Stock ROM you must flash the Fastboot ROM through MiFlash Tool... Firmware is not needed.
1- Download this MiFlash version : MiFlash 20210226
2- Download the v12.5.4 Fastboot ROM from Xiaomi Firmware Updater and unzip it
3- Install Drivers if needed
4- Select "Clean All" as you don't want to lock the bootloader to keep OrangeFox and start flashing
5- Wait for MIUI Boot
6- Reboot to Fastboot and flash PE Recovery or boot TWRP
7- Flash OrangeFox Zip
8- Done , you have Stock MIUI with OrangeFox
i hope this can help you , Cheers
alonsoj636 said:
You can't flash recovery miui with twrp/orangefox... in order to reinstall the Stock ROM you must flash the Fastboot ROM through MiFlash Tool... Firmware is not needed.
1- Download this MiFlash version : MiFlash 20210226
2- Download the v12.5.4 Fastboot ROM from Xiaomi Firmware Updater and unzip it
3- Install Drivers if needed
4- Select "Clean All" as you don't want to lock the bootloader to keep OrangeFox and start flashing
5- Wait for MIUI Boot
6- Reboot to Fastboot and flash PE Recovery or boot TWRP
7- Flash OrangeFox Zip
8- Done , you have Stock MIUI with OrangeFox
i hope this can help you , Cheers
Click to expand...
Click to collapse
Hi, After i select clean all/clean all and lock this message popup i assume it can't find the ROM file right?
But i make sure to put the downloaded ROM is there but the file format is .tgz is that the case? If not how can i fix this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lolitary said:
Hi, After i select clean all/clean all and lock this message popup i assume it can't find the ROM file right?
But i make sure to put the downloaded ROM is there but the file format is .tgz is that the case? If not how can i fix this?
View attachment 5525005
Click to expand...
Click to collapse
you must unzip the .tgz file and write the path to the ROM into the bar above... example : Desktop/RN10/mojito_global_12.5.4.....
Note : Don't use Clean all and lock otherwise your bootloader will be locked and you will have to unlock it again in order to flash another custom recovery
alonsoj636 said:
you must unzip the .tgz file and write the path to the ROM into the bar above... example : Desktop/RN10/mojito_global_12.5.4.....
Note : Don't use Clean all and lock otherwise your bootloader will be locked and you will have to unlock it again in order to flash another custom recovery
Click to expand...
Click to collapse
Thank you so much now i'm back to the original MIUI ROM.
Now i'm just curios if this flash tool also clean my root folder or not since my root folder kinda mess from my trial and errors and it take up quite amount of disk space and my phone storage show as 29.1GB/128GB after clean flashed. But its not a big problem i can live with it.
Lolitary said:
Thank you so much now i'm back to the original MIUI ROM.
Now i'm just curios if this flash tool also clean my root folder or not since my root folder kinda mess from my trial and errors and it take up quite amount of disk space and my phone storage show as 29.1GB/128GB after clean flashed. But its not a big problem i can live with it.
Click to expand...
Click to collapse
Yes , MiFlash clean everything... can u kindly share screenshot from About Phone > Storage? 29.1GB seems too much space for a fresh MIUI installation ...
alonsoj636 said:
Yes , MiFlash clean everything... can u kindly share screenshot from About Phone > Storage? 29.1GB seems too much space for a fresh MIUI installation ...
Click to expand...
Click to collapse
This is after i uninstalled all the bloatware and updated all the system apps
Lolitary said:
This is after i uninstalled all the bloatware and updated all the system apps
Click to expand...
Click to collapse
this is mine , 64GB model... it should be 20-25 GB after all updates... i think yours is fine

Recovery dont stick, can fastboot

My poco f1 its boot looping, it stick with the logo of poco and dont move to miui, had the stock miui rom of course bootloader unlocked. i can fastboot boot to twrp 3.6.2 then i flashed twrp without the issue, at twrp i can look what i got in the internal memory, at first i thought my miui corrupted, so decided to start fresh and flash miui eu last stable version, of course had to format, then wipe, when i flashed the rom no issue or error, but then after reboot still the same boot loop, tried to go to recovery and sometimes its hit or miss.
In the end the phone its not working fatsboot works completely but booting to system its not, and booting recovery works when its connected to the pc
Seriously dont know what to do
eilegz said:
My poco f1 its boot looping, it stick with the logo of poco and dont move to miui, had the stock miui rom of course bootloader unlocked. i can fastboot boot to twrp 3.6.2 then i flashed twrp without the issue, at twrp i can look what i got in the internal memory, at first i thought my miui corrupted, so decided to start fresh and flash miui eu last stable version, of course had to format, then wipe, when i flashed the rom no issue or error, but then after reboot still the same boot loop, tried to go to recovery and sometimes its hit or miss.
In the end the phone its not working fatsboot works completely but booting to system its not, and booting recovery works when its connected to the pc
Seriously dont know what to do
Click to expand...
Click to collapse
Try this tool
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
im going to check it, but does that relock my bootloader?
eilegz said:
im going to check it, but does that relock my bootloader?
Click to expand...
Click to collapse
Only if you check the clean all and lock box which is set by default.
some issues when i open the miflash tool and phone its not detected
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
eilegz said:
some issues when i open the miflash tool and phone its not detected
Click to expand...
Click to collapse
Just create an empty file named [email protected] in the log folder
try a version of miflash corresponding to the year of your phone.
was flashing until this
eilegz said:
was flashing until this
Click to expand...
Click to collapse
try a version of miflash corresponding to the year of your phone or don't use Miflash, open the folder of the tgz file you extracted and use the Bat file"flash-all".
ok after following this advice
to deal with that error it flashed without issue
But sadly the same as before poco logo boot loop
eilegz said:
But sadly the same as before poco logo boot loop
Click to expand...
Click to collapse
You haven't flashed anything because you must have an error at the end of the flash since you don't lock the bootloader.
Again,try a version of miflash corresponding to the year of your phone or don't use Miflash, open the folder of the tgz file you extracted and use the Bat file"flash-all"
tried the flash_all.bat but this appear
eilegz said:
tried the flash_all.bat but this appearView attachment 5712217
Click to expand...
Click to collapse
Which rom did you try to flash?
NOSS8 said:
Which rom did you try to flash?
Click to expand...
Click to collapse
downloaded this one https://xiaomifirmwareupdater.com/miui/beryllium/
eilegz said:
downloaded this one https://xiaomifirmwareupdater.com/firmware/beryllium/
Click to expand...
Click to collapse
These are firmware not full roms.
Download here a fastboot rom TGZ
https://xiaomifirmwareupdater.com/miui/beryllium/
NOSS8 said:
These are firmware not full roms.
Download here a fastboot rom TGZ
https://xiaomifirmwareupdater.com/miui/beryllium/
Click to expand...
Click to collapse
im mistaken the link but it was the full one had to extract the tgz then the tar and that get me the folder with the rom
eilegz said:
im mistaken the link but it was the full one had to extract the tgz then the tar and that get me the folder with the rom
Click to expand...
Click to collapse
try a version of miflash corresponding to the year of your phone.(older version).
NOSS8 said:
try a version of miflash corresponding to the year of your phone.(older version).
Click to expand...
Click to collapse
going to try this one https://xiaomiflashtool.com/download/xiaomi-flash-tool-20181115 since poco f1 released on august 2018
FInished flashing using the old mi flash still same issue poco logo boot loop
eilegz said:
FInished flashing using the old mi flash still same issue poco logo boot loop
Click to expand...
Click to collapse
Same https://forum.xda-developers.com/t/recovery-dont-stick-can-fastboot.4493095/post-87439937
Post the Miflash log +or- 20/25ko
NOSS8 said:
Same https://forum.xda-developers.com/t/recovery-dont-stick-can-fastboot.4493095/post-87439937
Post the Miflash log +or- 20/25ko
Click to expand...
Click to collapse
fastboot and flash log right?

Categories

Resources