Is there any custom rom available for Samsung A02s (SM-A025F/DS)?
hello, I'm also looking for a custom room, preferably 64 bits, doesn't anyone have it?
i think theres none (just guessing)
no, and most secure wont have, is a basic phone, just wait if someone get this hands on it
Clayton Garda said:
hello, I'm also looking for a custom room, preferably 64 bits, doesn't anyone have it?
Click to expand...
Click to collapse
Samsung A02s runs on 32-bit firmware.
But, it also supports 64-bit firmware, which means you can install almost any GSI Custom ROM since it supports treble.
Haven't tried installing one yet but will test and see if I can do it.
Samsung
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
(I would also post this reply on another thread so that others can be informed)
Hi! Sadly, there's no custom rom built specifically for A02s but it is compatible with arm32_binder64 GSIs with A/B Partition Style. I successfully installed a TrebleDroid version of Android 13, here's the proof.
View attachment 5826975
Yxles said:
(I would also post this reply on another thread so that others can be informed)
Hi! Sadly, there's no custom rom built specifically for A02s but it is compatible with arm32_binder64 GSIs with A/B Partition Style. I successfully installed a TrebleDroid version of Android 13, here's the proof.
View attachment 5826975
Click to expand...
Click to collapse
Wow! I was going to test it but thank god I found someone who already did!
I will make a thread regarding installing GSI roms on A02s once I try it myself so that I can help other do it.
Yxles said:
(I would also post this reply on another thread so that others can be informed)
Hi! Sadly, there's no custom rom built specifically for A02s but it is compatible with arm32_binder64 GSIs with A/B Partition Style. I successfully installed a TrebleDroid version of Android 13, here's the proof.
View attachment 5826975
Click to expand...
Click to collapse
Have you been able to install Gapps on it? I got my twrp from this and got my gApps from NikGapps since the original one doesn't have Gapps for Android 13.
But when flashing it, I got an 'insufficient space' error. When doing some research, I found out that the /data partition can be resized to give space to /system and /product for it to be able to install.
But there doesn't seems to be an option to resize it. Tried with resize2fs but got an error saying that the block specified doesn't exist.
tangy912 said:
Have you been able to install Gapps on it? I got my twrp from this and got my gApps from NikGapps since the original one doesn't have Gapps for Android 13.
But when flashing it, I got an 'insufficient space' error. When doing some research, I found out that the /data partition can be resized to give space to /system and /product for it to be able to install.
But there doesn't seems to be an option to resize it. Tried with resize2fs but got an error saying that the block specified doesn't exist.
Click to expand...
Click to collapse
Sadly nope, installing gapp on an Android 13 GSIs on this device is pretty hard. Tried numerous flavors but to no avail. LiteGApps is kinda working for me but the Play Store only shows No Internet Access, it can be substitute with Aurora Store tho (but it would be nice if it works). Other than Play Store, everything seems to work fine.
Installing GSIs with gapps preinstalled has Google app always crashing (one GSI I used shows that its using a arm64 build of Google app which will obviously crash on our a64 devices). I guess things would be much better if a custom rom or an arm64 TWRP and kernel was built specifically for this device.
The kinda stable GSI I found so far in this device was LineageOS 19.1 a64 bgN. Google apps works flawlessly but universalsafetynetfix was causing the system to crash so F.
Yxles said:
Sadly nope, installing gapp on an Android 13 GSIs on this device is pretty hard. Tried numerous flavors but to no avail. LiteGApps is kinda working for me but the Play Store only shows No Internet Access, it can be substitute with Aurora Store tho (but it would be nice if it works). Other than Play Store, everything seems to work fine.
Installing GSIs with gapps preinstalled has Google app always crashing (one GSI I used shows that its using a arm64 build of Google app which will obviously crash on our a64 devices). I guess things would be much better if a custom rom or an arm64 TWRP and kernel was built specifically for this device.
Click to expand...
Click to collapse
WellI I think the other alternative we can use is microG. I'll see if this works.
Yxles said:
The kinda stable GSI I found so far in this device was LineageOS 19.1 a64 bgN. Google apps works flawlessly but universalsafetynetfix was causing the system to crash so F.
Click to expand...
Click to collapse
Update: I found a LineageOS 19.1 GSI with Google that is stable, its lineage-19.1-20230112-UNOFFICIAL-a64_bgN-vndklite.
Yxles said:
The kinda stable GSI I found so far in this device was LineageOS 19.1 a64 bgN. Google apps works flawlessly but universalsafetynetfix was causing the system to crash so F.
Click to expand...
Click to collapse
Yeah I was also having this issue. I was wondering what was causing the crash lol.
It seems that no SafetyNet fixing method is working. I even tried the built-in option to spoof the device properties for safetynet to work in TrebleDroid Lineage OS 20 but this also made the device crash.
Yxles said:
Update: I found a LineageOS 19.1 GSI with Google that is stable, its lineage-19.1-20230112-UNOFFICIAL-a64_bgN-vndklite.
Click to expand...
Click to collapse
Have you tried the one with normal vndk aka lineage-19.1-20230112-UNOFFICIAL-a64_bgN.img.xz?
Edit : Tried it and it worked without any issue!
tangy912 said:
Have you tried the one with normal vndk aka lineage-19.1-20230112-UNOFFICIAL-a64_bgN.img.xz?
Edit : Tried it and it worked without any issue!
Click to expand...
Click to collapse
Yup it works fine but I do need the system to be R/W so I choose the vndklite but vndk variants should also work perfectly fine
hola ya exixte alguna rom para a02s???
Nicko13 said:
hola ya exixte alguna rom para a02s???
Click to expand...
Click to collapse
There's no ROMs for it. Only GSIs can be used for now.
Yxles said:
Yup it works fine but I do need the system to be R/W so I choose the vndklite but vndk variants should also work perfectly fine
Click to expand...
Click to collapse
Hey, I cant make and receive calls with this rom u told us, Lineageos 19.1, ¿do you have the same bug?
Panspermia98 said:
Hey, I cant make and receive calls with this rom u told us, Lineageos 19.1, ¿do you have the same bug?
Click to expand...
Click to collapse
Works fine for me. Did you flash the right image?
Yxles said:
Sadly nope, installing gapp on an Android 13 GSIs on this device is pretty hard. Tried numerous flavors but to no avail. LiteGApps is kinda working for me but the Play Store only shows No Internet Access, it can be substitute with Aurora Store tho (but it would be nice if it works). Other than Play Store, everything seems to work fine.
Installing GSIs with gapps preinstalled has Google app always crashing (one GSI I used shows that its using a arm64 build of Google app which will obviously crash on our a64 devices). I guess things would be much better if a custom rom or an arm64 TWRP and kernel was built specifically for this device.
Click to expand...
Click to collapse
Found a fix for the No internet access issue. All you have to do is go into the app's info in Settings and go to Mobile data and WiFi and give it internet access.
The Gapps Integration I'm using is BitsGapps which supports arm devices and Android 13. I installed it through Magisk. But it can also be flashed through TWRP.
But LiteGapps is also good.
A fix for the no space issue when trying to flash Gapps is flashing a GSI Image that's 1GB or 500MB (Depends on how much free space you want) larger than the image through fastboot and then flashing the Lineage OS image through TWRP.
TWRP doesn't resize partitions when flashing an image (which leads to some free space remaining) but fastboot does. This gave me the idea to do this and it worked.
Now I have a working Android 13 GSI with Gapps working flawlessly!
Related
Deprecated take a look at this post
Lineage OS unofficial nightlies for the OnePlus One!!
These builds pick up where cm nightlies left off.
I've not made any changes to the source files, so these builds are vanilla Lineage. Builds are made from the repos located at https://github.com/LineageOS
Requirements: You must be running cm already, stable or nightly build.
FAQ:
Q: Can I flash this over a cm nightly that I'm already running?
A: Yes!
Q: Do I need to flash gapps if I was not using a nightly before?
A: Yes!
Q: Are otas available?
A: No, I don't have a server to host the otas on.
Edit: OTAs are now available starting from lineage-14.1-20170104-UNOFFICIAL-bacon.zip.
I plan to post nightlies every day until LineageOS gets a build server setup.
Downloads:
https://www.androidfilehost.com/?w=files&flid=140911
Mirror: https://programming4life.com/dl/bacon/
XDA:DevDB Information
LineageOS, ROM for the OnePlus One
Contributors
Programming4life
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2016-12-30
Last Updated 2017-01-23
I might as well go in dry...
.props to the speed.
keep up the good work
*I hope this thread gets merged with cm nightly for bacon*
So far so good.
http://i.imgur.com/R3Q7Hfx.png
Tnx
I'll wait for the official builds.. But, thanks for building it..
I'll flash it when everything is settled..so that data won't be lost..
jkmangang said:
..so that data won't be lost..
Click to expand...
Click to collapse
You'll only lose the data if your not on cm nightly already.
jkmangang said:
I'll wait for the official builds.. But, thanks for building it..
I'll flash it when everything is settled..so that data won't be lost..
Click to expand...
Click to collapse
Save for the kernel string, it's literally an unbranded build of CM.
Functionally identical to the final CM builds for bacon. Same stability.
Programming4life said:
You'll only lose the data if your not on cm nightly already.
Click to expand...
Click to collapse
Thanks for the information.. I'll give it a shot.. ?✌
Not found download section sent me the link
It's at the top of the page.
shivaraj.khangembam said:
Not found download section sent me the link
Click to expand...
Click to collapse
Open site in a browser, look at the top of the page. There will be a tab called "Downloads".
shivaraj.khangembam said:
Not found download section sent me the link
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/?id=18602#downloads
Cmxlog should switch to lineage gerrit now. There is no any simple place to read changelog
can anyone upload Lineage bootanimation
A$h!$h said:
can anyone upload Lineage bootanimation
Click to expand...
Click to collapse
I don't think Lineage has an official boot logo/animation yet, that's why you see the aosp "android" text.
Good Job @Programming4life
Thanks a lot! So odd question anyway you can make a user build instead of userdebug and with ro.debuggable = 0 ? Once the su disable patch makes it through should be able to run all the apps without deroot and using magisk I think if that's the case. Currently I have to use a bunch of magisk scripts to use Pokemon GO, Miitomo, Android Wear, and Android Pay but currently Android Pay doesn't seem to work but it might be because it's user debug not user according to what this one lineage os dev said.
Also, there are two other bugs YouTube gets stuck on 60fps videos. The last one is it can't play certain wav codec audio files that Allo uses for message sounds.
Other than these few bugs the cm14.1 builds have been almost perfect.
Link_of_Hyrule said:
Thanks a lot! So odd question anyway you can make a user build instead of userdebug and with ro.debuggable = 0 ? Once the su disable patch makes it through should be able to run all the apps without deroot and using magisk I think if that's the case. Currently I have to use a bunch of magisk scripts to use Pokemon GO, Miitomo, Android Wear, and Android Pay but currently Android Pay doesn't seem to work but it might be because it's user debug not user according to what this one lineage os dev said.
Also, there are two other bugs YouTube gets stuck on 60fps videos. The last one is it can't play certain wav codec audio files that Allo uses for message sounds.
Other than these few bugs the cm14.1 builds have been almost perfect.
Click to expand...
Click to collapse
I pass safety net just fine with magiskhide activated.
Just flash the unsu script by osmosis (http://forum.xda-developers.com/showpost.php?p=63615067) and afterwards install magisk and phh superuser zips (don't forget to download the phh superuser app from google play) and enable magisk hide in magisk manager.
Can't talk about android pay though as it's not available in germany
om22 said:
I pass safety net just fine with magiskhide activated.
Just flash the unsu script by osmosis (http://forum.xda-developers.com/showpost.php?p=63615067) and afterwards install magisk and phh superuser zips (don't forget to download the phh superuser app from google play) and enable magisk hide in magisk manager.
Can't talk about android pay though as it's not available in germany
Click to expand...
Click to collapse
Passing SafetyNet let's you play Pokemon GO it doesn't let you use Android Pay or Miitomo.
Miitomo detects that ro.debuggable = 1 in the kernel. There is a magisk script I use to fix this however.
Android Pay requires other things and I was hoping to get a regular user build to see if the gui pops up when I try to use it at a terminal. Currently nothing happens if you touch a terminal even though you pass SafetyNet and can add a card to it. NFC works normally for everything else.
What I was told here https://review.lineageos.org/#/c/154019/
"PGo only detects su and removing (or even renaming) it does the trick. As for Android Pay, it indeed only works in user builds with release keys and verifiedbootstate has to be hidden: https://review.lineageos.org/#/c/152044/."
We have a thread about this for our device. Myself and a few others are trying to get to the bottom of the actual problem and try and fix it. http://forum.xda-developers.com/showthread.php?t=3504989
HTML:
Pixel Experience ROM for the Galaxy Note 9
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 8.1
Click to expand...
Click to collapse
What's working?
Everything seems to be working as on the official s9 los15 build; with minor exceptions (screen recording can sometimes be a lil buggy, nfc can be a lil hicky etc)
What's not working?
Obviously Samsung's own features such as Samsung Pay, KNOX, Theme Center, Game Launcher, etc. won't be ported to LineageOS Pixel Experience. We may have our own implementation to similar functions, though.
Iris sensor does not work because AOSP upstream does not support that yet.
IMS services (VoLTE, VoWiFi, etc). Samsung has their own proprietary implementation. It is not really possible to easily port that to LineageOS PixelExperience.
Click to expand...
Click to collapse
Disclaimer: This rom is not built by me. That has been done by @malinathani with some help from myself. After that he insisted that I make this thread :highfive:
Instructions:
Make sure TWRP has been installed and functional.
Download the latest build linked below
Reboot to recovery
Wipe data and cache (required if you switch from other ROMs). Even better if you have nothing to loose and wipe system,data,cache,storage etc
Flash the latest build (and gapps). DONT flash gapps. they are already included in the rom.
Reboot and enjoy :victory:
Downloads:
Galaxy Note9 (N960F): MEGA Onedrive
Providing feedback:
You are more than welcome to provide any kind of feedback here.
(limited only to feature requests; it's called "pixel experience" for a reason and it should stay that way)
You can also msg me anytime on telegram @ Rainbow_Alex_Dash
OR YOU CAN JOIN OUR TELEGRAM GROUP!
https://t.me/joinchat/E_rQyU__5M_5wph6FrnpKA
Changelog:
30.09.2018: Initial release
Troubleshooting/FAQ:
Q: Whaaaaaa??? You are developing for the note9 now?
A: Nah, not really. This isn't even built by me. I just helped the guy who did it so much he insisted I create the thread. I'm not promising any future development on my end but hey
Q: The rom isn't booting/camera doesn't work
A: Flash/make sure you have the ARH5 vendor and try again.
Q: The rom is in a bootloop/google apps keep crashing
A: You did read the instructions and NOT flash any gapps riighhttt?? smh, wipe /system,/data and /cache and start over
Q: I have another bug; How can i tell it to you while slightly increasing my changes of it ever getting fixed.
A: You can tell me what's going on either here or on telegram WITH A LOGCAT attached(required);if rom isn't booting at all attach /proc/last_kmsg.
Q: I don't know what/how to logcat. Is it really necessary?
A: Logcat or gtfo
Q: How can i support you?
A: Awwww thanks; On most of my posts on the left side there's a "donate to me" paypal button; You can use that,donations are more than welcome, or if you don't have any $ to spare you can also post here about how awesome i am (this surprisingly helps very much)
XDA:DevDB Information
Pixel Experience 8.1, ROM for the Samsung Galaxy Note 9
Contributors
Rainbow_Dash, malinathani, jesec,Vaughnn,farovitus
Source Code: https://github.com/malinathani
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 30.09.2018
Stable Release Date: 2018-09-30
Created 2018-09-30
Last Updated 2018-10-03
reserved
It seems that no one wants to brush the machine.
But still thank you very much
Does the pen work ?
giorgior.r said:
Does the pen work ?
Click to expand...
Click to collapse
Does work as a stylus, you can check it out and let us know!
Thanks for this. Was waiting for an AOSP Based ROM before rooting. Will root and flash later and report back .
Test it out and let us know what you guys think! Feedback is appreciated
Good day,
1. Is there a link/attachment for an official ARH5/ARH6 vendor image that we can use with this ROM?
2. I wiped /system,/data and /cache flashed the ROM with and without an ARH6 image (https://androidfilehost.com/?fid=1322778262904015418) within TWRP and got bootloop.
What am I missing?
Swarai said:
Good day,
1. Is there a link/attachment for an official ARH5/ARH6 vendor image that we can use with this ROM?
2. I wiped /system,/data and /cache flashed the ROM with and without an ARH6 image (https://androidfilehost.com/?fid=1322778262904015418) within TWRP and got bootloop.
What am I missing?
Click to expand...
Click to collapse
Ummm, you can try flashing vendor from the Light Rom thread or try flashing noverity.zip after flashing the ROM.
There are a bunch of them. In treble forums
Surprised no one bothered to upload them here
All pie gsi roms work with note 9
TheUndertaker21 said:
There are a bunch of them. In treble forums
Surprised no one bothered to upload them here
All pie gsi roms work with note 9
Click to expand...
Click to collapse
I totally agree, but give this a shot once, it's noticeably smooth compared to the gsis out there (I've used many myself) it also has dual speakers working. As for pie gsis they have this animation lag while switching and opening apps. Give it a shot and I hope you'll like it.
malinathani said:
I totally agree, but give this a shot once, it's noticeably smooth compared to the gsis out there (I've used many myself) it also has dual speakers working. As for pie gsis they have this animation lag while switching and opening apps. Give it a shot and I hope you'll like it.
Click to expand...
Click to collapse
Thank you. Great to have specific support just for Note9!
I've tried other GSIs from Treble forums and yes on those roms only mono audio output works and also had brightness issues last time I tried it. I will try this out
---------- Post added 1st October 2018 at 12:31 AM ---------- Previous post was 30th September 2018 at 11:49 PM ----------
I flashed it and I gotta say, this is very good. I'll keep this as my daily driver if I don't run into any issues which I haven't so far
I really like that there's bixby button custom options included. Rom is super smooth. Definitely smoother than other GSIs on the treble forums. Dual speakers are working but volume seems lower than stock (can anyone confirm this?)
Regarding the vendor, I am using ARH6 vendor. Like I said, so far I haven't gotten any issues.
I think you should include in OP that root isn't included. I flashed Magisk zip and it works fine though
Nasty_z said:
Thank you. Great to have specific support just for Note9!
I've tried other GSIs from Treble forums and yes on those roms only mono audio output works and also had brightness issues last time I tried it. I will try this out
---------- Post added 1st October 2018 at 12:31 AM ---------- Previous post was 30th September 2018 at 11:49 PM ----------
I flashed it and I gotta say, this is very good. I'll keep this as my daily driver if I don't run into any issues which I haven't so far
I really like that there's bixby button custom options included. Rom is super smooth. Definitely smoother than other GSIs on the treble forums. Dual speakers are working but volume seems lower than stock (can anyone confirm this?)
Regarding the vendor, I am using ARH6 vendor. Like I said, so far I haven't gotten any issues.
I think you should include in OP that root isn't included. I flashed Magisk zip and it works fine though
Click to expand...
Click to collapse
How well does it handle memory? I heard AOSP roms on GS9 doesn't keep apps in memory as well as stock.
Also for the low volume thing. Have you tried Dolby Atmos? It has always helped me in the past with my phones.
Okay so.. I'm having a weird issue. The rom was working perfectly fine and then it started to register every single tap as a long press. Every time I touch the screen, it registers a long press. If this issue can be fixed, everything else was working great. At first, I thought it was because I installed magisk modules but I just uninstalled magisk completely and the issue is still there. Logcat is attached.
@Fiso I'll try Dolby Atmos and keep an eye on memory as soon as the touchscreen issue goes away.
Logcat: https://mega.nz/#!90YFDArb!Yz_d5eHQPXfjZ2NIp6OLCTgzUBJ04bcwPbyAxZ3V3jE
Nasty_z said:
Okay so.. I'm having a weird issue. The rom was working perfectly fine and then it started to register every single tap as a long press. Every time I touch the screen, it registers a long press. If this issue can be fixed, everything else was working great. At first, I thought it was because I installed magisk modules but I just uninstalled magisk completely and the issue is still there. Logcat is attached.
@Fiso I'll try Dolby Atmos and keep an eye on memory as soon as the touchscreen issue goes away.
Logcat: https://mega.nz/#!90YFDArb!Yz_d5eHQPXfjZ2NIp6OLCTgzUBJ04bcwPbyAxZ3V3jE
Click to expand...
Click to collapse
Hmmmm, that's weird, which module did you install btw? If you still have this issue you can try dirty flashing the ROM or clean installing it again. I tested the ROM myself for almost a week before releasing it. Also which model are you using?
malinathani said:
Hmmmm, that's weird, which module did you install btw? If you still have this issue you can try dirty flashing the ROM or clean installing it again. I tested the ROM myself for almost a week before releasing it. Also which model are you using?
Click to expand...
Click to collapse
The module was xposed installer for the latest SDK. Model is N960F. Dirty flashing did not help. So I did a clean flash and it's fine for now. I'll flash magisk and install modules other than xposed and try
Nasty_z said:
The module was xposed installer for the latest SDK. Model is N960F. Dirty flashing did not help. So I did a clean flash and it's fine for now. I'll flash magisk and install modules other than xposed and try
Click to expand...
Click to collapse
I currently have xposed installed myself, I installed xposed framework module which automatically installs it for the correct SDK version.
Nice rom, but there is no mirrorlink :crying:
malinathani said:
I currently have xposed installed myself, I installed xposed framework module which automatically installs it for the correct SDK version.
Click to expand...
Click to collapse
Yeah it isn't the module. I've done some more tests. The issue only happens if I install or restore multiple applications. Not sure why. Can you tell me what vendor you use?
Also, the keyboard seems sluggish. I don't mean the UI, like the touch responsivenes? If you type really fast, keyboard can't keep up (compared to stock)? Can you confirm this?
Nasty_z said:
Yeah it isn't the module. I've done some more tests. The issue only happens if I install or restore multiple applications. Not sure why. Can you tell me what vendor you use?
Also, the keyboard seems sluggish. I don't mean the UI, like the touch responsivenes? If you type really fast, keyboard can't keep up (compared to stock)? Can you confirm this?
Click to expand...
Click to collapse
I would recommend you to reinstall apps only from playstore and not restore them because that is known to break stuff. I have no lag issues even on keyboard which you are saying. if you still have issues you can try with ARH5 vendor.
Intro(Skip at your wish xd):
Hello guys, it's kind of frustrating that our 4a 5G don't get much love here(in custom ROM development perspective) as Pixel 5 as it's not really a "main" variant.
For myself, I love Pixel devices for Google releases "proper" device tree and most necessary stuff, but still it require quite some time for me to get things right and a working ROM build, hell, to be honest, I spent like about 30 hrs already as this is my first time to use AOSP tree + vendor blobs from Google site to build ROMs)
Despite the lack of previous experience, the first build that I'm releasing here, is working quite well, I haven't discovered any (device-specific) bug just yet, anyway, let's continue
Click to expand...
Click to collapse
Instructions:
0. Make sure your bootloader is unlocked
1. Download ROM zip from the link below, and grab Magisk patched boot.img inside the folder as well if you want root access
2. Reboot to bootloader
2.5. Flash updated bootloader.img and radio.img from Google site
3. Use `fastboot -w update LineageOS_microG-bramble-(BUILD DATE HERE)-userdebug-signed.zip` to flash
and yes, you can omit the "-w" parameter if you're not flashing for the first time, aka just updating from previous release
4(optional). Hopefully after flashing you'll be booted into LineageOS, reboot to bootloader again,
and flash the Magisk patched boot.img extracted from the 7z file with `fastboot flash boot magisk_patched.img`,
reboot after finished
5. Enjoy!
Click to expand...
Click to collapse
Features:
1. MicroG integrated nicely (Thank OmniROM dev([email protected]) for the repo)
2. Replaced default WebView with Bromite WebView
3. Default DNS was set to UncensoredDNS in framework overlay
4. Removed unnecessary prebuilt APKs
Click to expand...
Click to collapse
Download
Contacts:
Telegram:
Channel for Pixel 4a 5G related stuff
Group for Pixel 4a 5G discussion
Special thanks: @kdrag0n , @akhilnarang for helping me with issues when I couldn't get my build working
XDA:DevDB Information
LineageOS 18.1 - microG Edition, ROM for the Google Pixel 4a 5G
Source
ROM
Kernel
Contributors
dic1911
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Current
Based On: LineageOS
Version Information
Status: Testing
Created 2020-11-29
Last Updated 2020-12-16
Current Known Issue
1. Some minor bubble notification glitch, ROM side issue.
2. Video call is unstable, crashes in about ~10 minutes after the call starts (untested in latest update, may be fixed)
3. If mobile data doesn't work after update, try select/set APN manually(select whatever APN first, then select the correct one after)
Reserved
Awesome, thank you!
I've never heard of the MicroG before so just looked that up. I'm loving that philosophy so I'm definitely gonna be checking that out! Thanks! My pixel is arriving tomorrow so after playing around with it first, I'll try out your ROM once there's more responses from others here.
Hey thx for the ROM is a A11 Version planned?
I'll wait for Android 11 version
Dimontiman said:
Hey thx for the ROM is a A11 Version planned?
Click to expand...
Click to collapse
warrencoakley said:
I'll wait for Android 11 version
Click to expand...
Click to collapse
LineageOS 18.0 is Android 11, but XDA didn't update the option menu so I chose Android 10.
View attachment 5144565
Took a while for this thread to pop back up after forum migration..
Thanks for the awesome work
Is anyone using this ROM as their daily driver? I'm still reluctant to risk my warranty
I guess I will roll the dice and give it a go. Anyone know if this will affect my e-sim with Google Fi?
Thank you, dic1911 for being so awesome to bring first rom to Bramble, which is almost brand-new! I appreciate your work and we are really glad for it.
Joegrizz said:
I guess I will roll the dice and give it a go. Anyone know if this will affect my e-sim with Google Fi?
Click to expand...
Click to collapse
It won't affect Google Fi.
Thanks. It looks great and runs good but I’m obviously missing something. I tried installing GApps via ADB side load and no matter which size Nikhil version I attempt to install, I get an error there’s not enough memory. I’ve rebooted after flashing to the rom and also done a factory reset to no avail. What am I missing? I’ve also tried it with and without the patched boot.img.
tgilmore16 said:
Thanks. It looks great and runs good but I’m obviously missing something. I tried installing GApps via ADB side load and no matter which size Nikhil version I attempt to install, I get an error there’s not enough memory. I’ve rebooted after flashing to the rom and also done a factory reset to no avail. What am I missing? I’ve also tried it with and without the patched boot.img.
Click to expand...
Click to collapse
Use systemless WeebGapps via Magisk:
t.me/WeebGAppsChannel
Does this rom use seedvault like mainline lineageos? Or is google backup in here even with microg?
Crashdown1994 said:
Is anyone using this ROM as their daily driver? I'm still reluctant to risk my warranty
Click to expand...
Click to collapse
Warranty? Should not effect that. I wouldn't think it would. Bootloader is unlockable and google even gives the option to flash aosp vanilla(no google) or public (official google rom) with their flashing tool (via chrome browser).
Are Pixel-Exclusive features such as Now Playing, Live Captions, Call Screening, Adaptive Sound, Screen Attention included and working?
Any issues getting safetynet to pass?
GoldElocks said:
Are Pixel-Exclusive features such as Now Playing, Live Captions, Call Screening, Adaptive Sound, Screen Attention included and working?
Any issues getting safetynet to pass?
Click to expand...
Click to collapse
This is Lineage... You install this one to get privacy and free yourself from Gapps. You might be able to get most features running, but then you just can stay with stock - privacy is then gone again...
letrain02 said:
Does this rom use seedvault like mainline lineageos? Or is google backup in here even with microg?
Click to expand...
Click to collapse
SeedVault is builtin system app for all LineageOS builds, no matter it's official or not, if it's not there in someone else's build, either it's removed by the builder or the build is too old.
So yes, SeedVault is in my build, but there's no guarantee that it works with any apps just like Google Backup(which I found pretty much useless in my case)
PS. I'm not really as active as I was on xda since about 2 years ago, please join Telegram for more updated stuff
PPS. I released GCam extracted from stock ROM and modified to make it work on LineageOS(and pretty much any custom ROM with right stuff baked in), and yes, you'll need to flash updated build from my Telegram channel (It's more convenient for me to upload to Telegram as the storage space there is unlimited)
LineageOS 18.1 is up!
Now with December security patch, grab it from the link in OP
Build 02/06/2023 #OPO
Telegram Group: https://t.me/TugaPowerOPO
#TugaPower R 11.0.0_r46 1.0 LineageOS #laos #OnePlus
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP
Also be sure you are using proper firmware.
Relative to gapps, the advised ones is pico package since nano its now too big to install ( ARM):
OTA built in on rom for updates easly
Three fingers screenshot ( enable in settings over gestures options )
Support out of the box to microG GmsCore ( https://forum.xda-developers.com/t/...oftware-clone-of-google-play-services.3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )
Nethunter/Kali supported
What does not works:
Let me know to add to second post
Download: https://cld.pt/dl/download/16e0f9e9-8f40-4f8d-8142-46bf5088f201/TugaPowerR2_OP1.zip
MD5: f064915c3dbb1fc4cc3d1fae0b62a623
Please dont mirror for now the roms zips, thanks
Sources :
Rom:- https://github.com/LineageOS
Device:- https://github.com/LineageOS/android_device_oneplus_bacon
Kernel:- https://github.com/LineageOS/android_kernel_oppo_msm8974
Place HOLDER for bugs !
Down link not working.
Gold Ribbed said:
Down link not working.
Click to expand...
Click to collapse
Fixed, bad copy paste, thanks for reporting that !
I have one question, does this rom supports DRM content and apps based on it?
Thanks for this Rod. Working good for me.
Not too much different from normal LoS but appreciated, thanks for keeping the OPO alive. Checked it out and everything is working smoothly, no major bugs, crashes or anything so far.
oneplusausage said:
Not too much different from normal LoS but appreciated, thanks for keeping the OPO alive. Checked it out and everything is working smoothly, no major bugs, crashes or anything so far.
Click to expand...
Click to collapse
Thats normal, the base it self its Los, the diference its on having 3 finger screenshot, microg nogapps support, nethunter support and mock locations apps the system report real GPS instead of mock app ( Pokemon will not ban for using mock location app ), support for face unlock its WIP ( no eta )
Hi, I've read somewhere that for new roms (Starting from Android 10) need to resize system partition. I've currently run 7.1.2 Rom, do I need to do the resize for this ROM? Thanks!
saphta said:
Hi, I've read somewhere that for new roms (Starting from Android 10) need to resize system partition. I've currently run 7.1.2 Rom, do I need to do the resize for this ROM? Thanks!
Click to expand...
Click to collapse
If the rom fail to flash its because you need to make that, but on OPO if you did not messed with the partitons before you will be probably just fine flashing and no need to resize. The issue is not really rom problem, the problem its when flashing gapps that will ask for more space, but that is most for bigger gapps packaging, it you use the nano or base package you will have no issues flashing. Sorry for late answer mate !
Hi Daniel, thanks for your reply! Will probably use a pico gapps package. Anyone used MindTheGapps?
saphta said:
Hi Daniel, thanks for your reply! Will probably use a pico gapps package. Anyone used MindTheGapps?
Click to expand...
Click to collapse
One or another should be fine, if use open gapps pick the small package and then install the rest trough Play Store !
Will do! thank you very much!
I'm not able to flash opengapps pico : error 70
I tried to resize system partition but not being able...
@danieldmm can you help me?
@danieldmm
I can confirm what amadeumagalhaes wrote above. Gapps pico won't install.
I've installed Magisk, got root and I tried deleting some system files to make more space but all apps I've used gave me the same message: uninstall failed. I used SD Maid, System app remover, My Android Tools.
Any ideas?
P.S.1 Instead of opengapps pico, I've flashed mindthegapps. No issues flashing it even if it's larger than opengapps pico. The issue with deleting system files remains unchanged.
Hi all,
Found one bug, after installing Signal. On video calls, my video is overexposed. Anyone else has this problem?
saphta said:
Hi all,
Found one bug, after installing Signal. On video calls, my video is overexposed. Anyone else has this problem?
Click to expand...
Click to collapse
A bunch of us had this same problem with @Tomoms ROM. He managed to fix this in recent releases.
I have no issues on whatsapp. On Tomoms ROM thread it says to restart the app until the overexposure is gone.
Well, its being a while guys, updated OP with 2.0 build done today.
TugaPower R 2.0 2023/06/02
https://cld.pt/dl/download/16e0f9e9-8f40-4f8d-8142-46bf5088f201/TugaPowerR2_OP1.zip
MD5: f064915c3dbb1fc4cc3d1fae0b62a623
If you have still 1.0 you cannot use OTA since the system its down, to use OTA you need to update the Updater you have on 1.0, will drop on bottom a update apk of Updater if you are on 1.0 and prefer to use OTA, just install as regular app updating the system one. And then use the built OTA to update from 1.0 to 2.0, you can also check the change log after updating the updater, its too big to post here, it have all the changes commited to lineageos since my last build. Enjoy guys, long live to OPO
Hi, i want to try android 14/pixel exp on s23 ultra as i have it on s22U but it seems to be impossible to install. Neither installs throught fastbootd neither from twrp how can i do it? Thanks
Start from here?
How to Download and Install Android 14 GSI ROM
Google has started the Android 14 development journey, and users can enjoy several valuable features, including the ability to grant permissions to individual
rootmygalaxy.net
Hi, @inthedthank you for your reply, it says that vbmeta partition is not accesible through adb when i try to flash it (failed) any workaround with that?
Hi I am kind of noobish to GSIs but I got the google built android 13 GSI working on my s23 last night, couldn't get pixel experience to boot. CrDroid would boot but I was getting a lot of random trips to the bootscreen during set-up.
Haven't tried android 14 yet, but the procedure was pretty simple for android 13 GSI. I had already unlocked bootloader/rooted my s23 before attempting this, which included flashing vbmeta_disabled
Downloaded official google android 13 GSI
Install TWRP with Odin
Reboot to recovery and wiped data
Reboot then into fastboot inside of TWRP
flashing gsi using fastboot: fastboot flash system system image
restarted went through set-up and downloaded Magisk and Pixelfy magisk mod and I am pretty content
If anyone knows how to get another GSI like Pixel Experience or CrDroid to work reliably I am super interested
Therazorsedge said:
Hi, @inthedthank you for your reply, it says that vbmeta partition is not accesible through adb when i try to flash it (failed) any workaround with that?
Click to expand...
Click to collapse
Haven't tried on s23 series yet.
Cannot Flash vbmeta.img in Android: How to Fix
In this comprehensive tutorial, we will show you various methods to fix the issue of being unable to flash the vbmeta.img file on Android.
www.droidwin.com
Hey, have you solved your problem
Anyone?
Cfly said:
Hi I am kind of noobish to GSIs but I got the google built android 13 GSI working on my s23 last night, couldn't get pixel experience to boot. CrDroid would boot but I was getting a lot of random trips to the bootscreen during set-up.
Haven't tried android 14 yet, but the procedure was pretty simple for android 13 GSI. I had already unlocked bootloader/rooted my s23 before attempting this, which included flashing vbmeta_disabled
Downloaded official google android 13 GSI
Install TWRP with Odin
Reboot to recovery and wiped data
Reboot then into fastboot inside of TWRP
flashing gsi using fastboot: fastboot flash system system image
restarted went through set-up and downloaded Magisk and Pixelfy magisk mod and I am pretty content
If anyone knows how to get another GSI like Pixel Experience or CrDroid to work reliably I am super interested
Click to expand...
Click to collapse
Hi, what version of A13 you tried? try to install the PEX rom and after that install original recovery, it should boot well, let me know
Cfly said:
Hi I am kind of noobish to GSIs but I got the google built android 13 GSI working on my s23 last night, couldn't get pixel experience to boot. CrDroid would boot but I was getting a lot of random trips to the bootscreen during set-up.
Haven't tried android 14 yet, but the procedure was pretty simple for android 13 GSI. I had already unlocked bootloader/rooted my s23 before attempting this, which included flashing vbmeta_disabled
Downloaded official google android 13 GSI
Install TWRP with Odin
Reboot to recovery and wiped data
Reboot then into fastboot inside of TWRP
flashing gsi using fastboot: fastboot flash system system image
restarted went through set-up and downloaded Magisk and Pixelfy magisk mod and I am pretty content
If anyone knows how to get another GSI like Pixel Experience or CrDroid to work reliably I am super interested
Click to expand...
Click to collapse
Wow that is awesome dude!! How is it going? Bugs you have found? Fingerprint?
Cfly said:
Hi I am kind of noobish to GSIs but I got the google built android 13 GSI working on my s23 last night, couldn't get pixel experience to boot. CrDroid would boot but I was getting a lot of random trips to the bootscreen during set-up.
Haven't tried android 14 yet, but the procedure was pretty simple for android 13 GSI. I had already unlocked bootloader/rooted my s23 before attempting this, which included flashing vbmeta_disabled
Downloaded official google android 13 GSI
Install TWRP with Odin
Reboot to recovery and wiped data
Reboot then into fastboot inside of TWRP
flashing gsi using fastboot: fastboot flash system system image
restarted went through set-up and downloaded Magisk and Pixelfy magisk mod and I am pretty content
If anyone knows how to get another GSI like Pixel Experience or CrDroid to work reliably I am super interested
Click to expand...
Click to collapse
How is it? Smooth? Any problem? Battery wise? Everything ))
Keller0088 said:
Wow that is awesome dude!! How is it going? Bugs you have found? Fingerprint?
Click to expand...
Click to collapse
Flammer99 said:
How is it? Smooth? Any problem? Battery wise? Everything ))
Click to expand...
Click to collapse
Hi guys, sorry for the delay. The stock 13 GSI was pretty good albeit not perfect. Smoothness was very nice after force enabling 120hz through adb (battery life is notably worse, as you would expect).
Feels just about as smooth as stock, which is pretty good IMO.
This was the stock google build, so no fingerprint or face unlock. I would imagine custom GSIs would fix some of this.
However I eventually returned to stock since I post videos on social media apps a lot, and the generic camera API on the GSI made it pretty bad to look at.
Fun to try out, just wasn't ready for my needs yet.
I also did try to flash the original recovery for PEX like the user above me mentioned, still no dice. I have been out of the Android scene for a few years prior to this so it is probably something I am doing.
Hope this helps, thanks!
use dsu sideloader
I rly Hope for a fully working GSI ROM on S23 Ultra
Hunter9037 said:
I rly Hope for a fully working GSI ROM on S23 Ultra
Click to expand...
Click to collapse
Fully working GSI ROM? lmao
Forget such thing, especially on newer devices and especially on Samsung.
Hunter9037 said:
I rly Hope for a fully working GSI ROM on S23 Ultra
Click to expand...
Click to collapse
I have tested a few of them. Only bugs are fingerprint scanner, Always on display and VoLTE. It can be used as a daily driver if you can live with these bugs. For me it's fine.
which GSI are you using? And which GCAM is working?
bhammler said:
which GSI are you using? And which GCAM is working?
Click to expand...
Click to collapse
@mohammed510
he's using trebledroid's LOS 20 I assume. I'll try it out as well one of these days, and iirc the amazing dev behind it takes requests for adding support to fp scanners, I'll ask him about it
JakoDel said:
@mohammed510
he's using trebledroid's LOS 20 I assume
Click to expand...
Click to collapse
The "Light" version by Andy Yan is the best one for S23U. There's a camera app already included. As for gcam, the one by "Shamim" works but only ultra wide lens. Better use the one included as it has switching between lenses all working.
Bugs are:
AOD
Fingerprint scanner
VoLTE
I think the first 2 can be fixed with Overlays that are flashed using Magisk. It's possible to have a almost 99% working GSI on S23U
You can make phone calls but it will be over 3G networks (not that bad really) and not through 4G as VoLTE still doesn't work
You can easily pass safety net with universal safetynet fix "MOD version" and Google Wallet also works after passing Safetynet
mohammed510 said:
The "Light" version by Andy Yan is the best one for S23U. There's a camera app already included. As for gcam, the one by "Shamim" works but only ultra wide lens. Better use the one included as it has switching between lenses all working
Click to expand...
Click to collapse
thanks a lot! and may I ask how is the battery life compared to oneUI?
edit: didn't see your new edit, I guess I'll try to follow the guide for making an overlay on github, many thanks.
JakoDel said:
thanks a lot! and may I ask how is the battery life compared to oneUI?
Click to expand...
Click to collapse
Battery life is better and phone runs noticeably cooler. Uses much less RAM also