Related
*** This project is now abandoned in favor of the LineageOS variant ***
This is a port of Cyanogenmod 14.1 for the Samsung Galaxy Tab A 7.0 (2016) LTE SM-T285. Cyanogenmod needs no introduction, it is one of the most popular aftermarket ROM distributions around.
5.1.1 is the best that you can get from samsung right now and it is not known if they plan to do any upgrades. I have absolutely no idea why samsung chose to stay with the outdated 5.1.1 mid 2016 when we already got 7.1 coming out. This custom rom is probably the best you can get if you want an upgrade from Lollipop. Performance on the latest build is also better, you be the judge.
As this is the first CM-14.1 release, I don't recommend you use this as a daily driver, but it should be good enough for some. Make sure you read the pending issues below and decide if this is acceptable to you before you flash this rom. This rom probably won't get much use out of some people until bluetooth is fixed.
Based off on Cyanogenmod 14.1 sources which is based on Nougat 7.1.
Device Tree:
=========
https://github.com/jedld/device_samsung_gtexslte.git
https://github.com/jedld/vendor_samsung_gtexslte.git
https://github.com/jedld/kernel_samsung_gtexslte.git
Update Dec 3, 2016
===============
Fixed GPS, Wifi Hotspot, Graphics issues, Calls, Camera,sdcard is now marked as adoptable.
Works:
- Wifi/SMS
- Audio
- Graphics with glitches (minor screen tearing, blank screen showing up on overlays)
- GPS
- Wifi Hotspot
- Incoming/Outgoing Calls
- MTP
Does not work:
- Bluetooth
- Camera
- LTE (Due to APN issues)
- Battery Meter not updating
Bugs/Known Issues
* Problems recording video
Other Notes:
- selinux permissive
Most of the issues are fixable, I just need more time and encouragement
SM-T280 Users: Unfortunately this rom would probably not work on it since the SM-T285 and SM-T280 have different kernels and slightly different hardware. I don't have access to this device so it would be hard for me to port it over. However I believe there are a lot of similiarities in the device tree that can be shared. If a dev with the SM-T280 is interested I can probably help.
Download
========
Remember flashing an unofficial ROM on your samsung device will probably void your warranty, Samsung representatives will probably not be able to help you as they are still stuck at 5.1.1 land as of now and have no idea how to handle a SM-T285 that is running 7.1.
As always flash this at your own risk. Make sure you have a copy of the stock ROM so that you have something to fall back to, which is highly the case when using an experimental rom.
See DevDB download section.
BUILD12032016
Note that this rom is pure stock and does not come with the Play Store or any Gapps, I suggest you download a micro gapps package separately and install it via recovery.
There have been reports that recent versions of open gapps don't work properly, it is advised to use older versions instead (e.g. open_gapps-arm-6.0-nano-20161109.zip)
Installation Instructions
==================
Perform a backup of all of your important files. This ROM is experimental and I will not be responsible for your loss of data.
Download the zip file and extract the tar.
Use Odin/Heimdall to flash the tar file to your device. If you are coming from stock oranother rom make sure you wipe first using TWRP. Coming from a previous version of OMNIRom for SM-T285 may not require a wipe, however please perform a wipe if you encounter problems.
Root and customization
===================
This ROM is a purely based on source and is not rooted out of the box. However you can easily root it by using TWRP to install the latest version of SuperSU.
If you want to customize this ROM and repackage it you may use this guide as a reference.
XDA:DevDB Information
CM-14.1 Samsung Galaxy Tab A 7.0 LTE (SM-T285), ROM for the Samsung Galaxy Tab A series
Contributors
jedld
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2016-12-03
Last Updated 2017-01-31
Nice job!!!
Great job! The ROM is impressively fluid, and I particularly love the way it renders fine text, which I appreciate because I prefer DPIs of 140 to 160. Unfortunately, just like in the early iterations of OmniROM 6.0, the tablet will not connect to the internet over cellular networks no matter how much I tinker with APNs. It's a great build, nevertheless, and I look forward to future releases.
Thank you !! Will give it a try.
posting here too (as did on omni - realized this is the cm 14.1 board)...
"briefly tried the cm14.1....much better very fast response-on the omni the pull down was an issue (would also ask me to format the sd card)
noticed here too the signal tends to drop in and out (wonder if it is some power saving going on-it goes to full strength during a call)...speakerphone also does not work here but must say this is better than the omni even though data does not work"
keyboard much better here too
on both cm14.1 and the omni, the dialer tends to be have some lag when pressing the numbers (do it too fast and can get many errors)-minor thing understand this is an alpha and the omni is a beta
thanks
I can't get Soft Keys to work, worked fine on the Omni ROM, only problem I have come across so far.
mazmorbid said:
I can't get Soft Keys to work, worked fine on the Omni ROM, only problem I have come across so far.
Click to expand...
Click to collapse
needs some xml changes that needs to be compiled into the framework for that I believe. Though there are more critical bugs I need to fix with this 7.1 rom.
I wish I could help in some way, appreciate your work.
thank for your awesome work, but i cant download any app from Playstore, it's downloading for a long time, i tried many way to force it works but nothing change. Have any one meet this trouble?
khanhpt said:
thank for your awesome work, but i cant download any app from Playstore, it's downloading for a long time, i tried many way to force it works but nothing change. Have any one meet this trouble?
Click to expand...
Click to collapse
Try using an older gapps package like from october, recent versions seem to have issues.
jedld said:
Try using an older gapps package like from october, recent versions seem to have issues.
Click to expand...
Click to collapse
Thank Jedld, i has tried 27th,october version and it WORKS, thank.
I used the version as recommended in the Omni ROM, which was from the 9th of November, no problems with the app store or downloading apps either.
Any closer to another release ?
Nougat will take a while unfortunately
jedld said:
Nougat will take a while unfortunately
Click to expand...
Click to collapse
hello jedid any hope here for data on cm14.1? Thanks
https://review.cyanogenmod.org/175308
https://review.cyanogenmod.org/175307
https://review.cyanogenmod.org/175306
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-14-0-t3458931
http://forum.xda-developers.com/mot...ent/rom-cyanogenmod-14-1-moto-x-play-t3515135
mac231us said:
hello jedid any hope here for data on cm14.1? Thanks
https://review.cyanogenmod.org/175308
https://review.cyanogenmod.org/175307
https://review.cyanogenmod.org/175306
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-14-0-t3458931
http://forum.xda-developers.com/mot...ent/rom-cyanogenmod-14-1-moto-x-play-t3515135
Click to expand...
Click to collapse
Tough to know for sure. Hopefully some progress will happen before christmas.
Sent from my Samsung SM-T285 using XDA Labs
jedld said:
Tough to know for sure. Hopefully some progress will happen before christmas.
Sent from my Samsung SM-T285 using XDA Labs
Click to expand...
Click to collapse
not knowledgeable here on CM and how things are done but those links for the CM...looks like they got merged just 6 days back. Or maybe these are not relevant? just asking/wondering thanks
mac231us said:
not knowledgeable here on CM and how things are done but those links for the CM...looks like they got merged just 6 days back. Or maybe these are not relevant? just asking/wondering thanks
Click to expand...
Click to collapse
Those patches didn't help unfortunately Though I've fixed network type selection in CM-14.1 already, unfortunately data connection still won't come online due to errors related to APNs. Seeing as this was working perfectly in CM-13 this could be a CM-14 or Nougat related change, it will take a while to figure out what that is. As for bluetooth I was able to get it to turn on, however it is still unable to detect/pair to any device, this is also something that was working in CM-13.
any hope on porting this to t280?
klemen241 said:
any hope on porting this to t280?
Click to expand...
Click to collapse
I don't have the T280 so I wouldn't know. There are devs that are trying or have tried to work on it, not sure about their progress.
Are there any Android Go ROMs available / underdevelopment for i9100? My phone has gone extremely slow and I think only something like Android Go could revive the old work horse.
Thanks for your time.
The unofficial LineageOS 15.1 builds by rINanDO (https://forum.xda-developers.com/galaxy-s2/development-derivatives/rom-lineageos-15-0-t3674567) are the first such ROMs currently, although, as of right now, it is in WIP phase, and although it is stable enough not to crash every few moments, a lot of things may be broken or not work at all.
I was wondering too. Thank you for the answer. I hope in 6months the bugs will be removed.
Cyanic Sword said:
The unofficial LineageOS 15.1 builds by rINanDO (https://forum.xda-developers.com/galaxy-s2/development-derivatives/rom-lineageos-15-0-t3674567) are the first such ROMs currently, although, as of right now, it is in WIP phase, and although it is stable enough not to crash every few moments, a lot of things may be broken or not work at all.
Click to expand...
Click to collapse
Are you sure those rINanDO's builds are based on Android Go and not full grown Android 8.1 ?
:fingers-crossed:
tnttrx said:
Are you sure those rINanDO's builds are based on Android Go and not full grown Android 8.1 ?
:fingers-crossed:
Click to expand...
Click to collapse
By nature, all Android Go builds are based on full grown Android 8.1, as they are built the same way, from the same source code, but the Android Go builds have an additional build flag attached at the very end.
So yes, they are based on Android Go, which in turn is based on Android 8.1.
and the flag is set !
Hello,
As the thread where I originally announced this was locked for reasons apparently unrelated to my build, and the links removed, I'm creating a new thread to keep the community aware of these builds.
I've been building LineageOS 14.1 from the official LineageOS source repository for my personal devices for some time now, and it finally occurred to me that others might find them useful.
These builds are created every Saturday night from a 100% unaltered LineageOS repository, which is synchronized with upstream every day. I must stress that there are NO MODIFICATIONS at all; if it worked/didn't work in the last official Cyanogenmod/LineageOS releases, it works/doesn't work in my builds. At Apple we called these "sustaining builds" -- they keep devices in sync with the latest security patches, but receive no new features.
The build for the Asus Zenpad 8.0 Z380K[N]L (aka P024) is at https://lineageos.disavowed.jp/p024/. This appears to work on both the Z380KL (as reported in the locked thread) and my Z380KNL. There are other devices being built as well ... if you would like me to add a 14.1 or 15.1 device to the weekly build roster, please let me know.
I hope this helps out folks who want to extend the service lifetime of their gear. Share and enjoy.
Edit: per moderator request, I need to provide a link to the source repository used to generate these builds to comply with XDA's interpretation of the GPL. It is the stock LineageOS repository, located at git://github.com/LineageOS/android.git. TheMuppets binary repository was used for the vendor blobs; it is at https://github.com/TheMuppets/
Hi, I have been using your build and updated my device weekly! it' s still good and awesome. (I also use your build for my nexus7)
if you find Oreo, Pie version! please let everyone know. Thank you.
Thank's keep update bro.
Hi, I don't see your weekly build for 22 Nov 2019.
Are there any issues ?
Nice update thanks friends l.
Yeap yesterday i reported, and TS promised to update.
Argh, apparently I wasn't subscribed to my own thread. Fixed.
Sorry about the SIM recognization problem. Somehow my private dev builds were being uploaded instead of the sustaining builds. @DEV87WHY pinged me a few days ago to let me know. The newest build is from the correct tree, and hopefully this won't happen again.
Sorry about that ...
Argh, apparently I wasn't subscribed to my own thread. Fixed.
Sorry about the SIM recognization problem. Somehow my private dev builds were being uploaded instead of the sustaining builds. @DEV87WHY pinged me a few days ago to let me know. The newest build is from the correct tree, and hopefully this won't happen again.
Sorry about that ...
Question about Unofficial rom for Asus ZenPad 8.0 z380knl
How do you update device with rom without losing apps and data? Is it possible to update from unofficial lineage os 14.1 from your repository to latest unofficial lineage os 14.1 build from your repository without having to reinstall apps? My understanding is that you follow the process of normal flash of rom but you don't wipe? Is that it?
Another question:
Does MTP(file transfer) work with this ROM?
Also, did you manage to unlock bootloader(oem unlock). I know it is possible to flash the rom without bootloader unlock. Is that how you do it or you have found a way to unlock bootloader?
Thank you so much.
poka_dan said:
How do you update device with rom without losing apps and data? Is it possible to update from unofficial lineage os 14.1 from your repository to latest unofficial lineage os 14.1 build from your repository without having to reinstall apps? My understanding is that you follow the process of normal flash of rom but you don't wipe? Is that it?
Another question:
Does MTP(file transfer) work with this ROM?
Also, did you manage to unlock bootloader(oem unlock). I know it is possible to flash the rom without bootloader unlock. Is that how you do it or you have found a way to unlock bootloader?
Thank you so much.
Click to expand...
Click to collapse
Hi there,
First off -- thanks for the gift! Much appreciated.
If you're just flashing one of my newer builds on top of one of my older builds, then you shouldn't have to do anything special. Just kick the device into recovery and flash on top of the older build. If you're coming from the ancient Cyanogenmod or the stock ROM, then AFAIK you'll have to wipe.
MTP *should* work but I've never tried it. I don't have my device with me right now so I can't do a quick verification.
For unlocking the bootloader, I'm trying to remember (this was several years ago). IIRC I put it into fastboot and did a tethered recovery boot (i.e., "fastboot boot /path/to/recovery_image_on_pc.img"). Then I did a full wipe and a flash ... and bricked the device because I had a Z380KNL and the Cyanogenmod image at the time supported only the Z380KL.
I then put the stock ROM back on, and when the KNL bits hit the Cyanogen repository, I flashed it with success. At no point did I ever successfully unlock the bootloader as far as I can tell -- I downloaded the ASUS unlock but it never reported success. When booted into fastboot, there's a locked symbol at the lower right of the screen. That doesn't interfere with flashing anything from recovery.
Oh, and important safety tip: to enter recovery from fastboot after you've flashed it via the tethered recovery boot, you'll have to choose "factory reset" on the KNL.
I hope that helps.
As soon as I find out MTP is working I will flash the rom
wileyc said:
Hi there,
First off -- thanks for the gift! Much appreciated.
If you're just flashing one of my newer builds on top of one of my older builds, then you shouldn't have to do anything special. Just kick the device into recovery and flash on top of the older build. If you're coming from the ancient Cyanogenmod or the stock ROM, then AFAIK you'll have to wipe.
MTP *should* work but I've never tried it. I don't have my device with me right now so I can't do a quick verification.
For unlocking the bootloader, I'm trying to remember (this was several years ago). IIRC I put it into fastboot and did a tethered recovery boot (i.e., "fastboot boot /path/to/recovery_image_on_pc.img"). Then I did a full wipe and a flash ... and bricked the device because I had a Z380KNL and the Cyanogenmod image at the time supported only the Z380KL.
I then put the stock ROM back on, and when the KNL bits hit the Cyanogen repository, I flashed it with success. At no point did I ever successfully unlock the bootloader as far as I can tell -- I downloaded the ASUS unlock but it never reported success. When booted into fastboot, there's a locked symbol at the lower right of the screen. That doesn't interfere with flashing anything from recovery.
Oh, and important safety tip: to enter recovery from fastboot after you've flashed it via the tethered recovery boot, you'll have to choose "factory reset" on the KNL.
I hope that helps.
Click to expand...
Click to collapse
Gift was my pleasure
The info is most usefull. Thank you for that.
I am currently running my ZenPad 8.0 z380knl on Asus stock rom but ardently looking to upgrade to android 7.1.2 for security reasons as well as other reasons.
I was investigating if everything is working on the new rom. Also upgrade procedure from stock rom to lineage os and from lineage os 14.1 to latest 14.1 lineage os. Thankfully you cleared all that up. Thanks so much !
Only thing that remains for me to find out is if MTP is working on rom, so please check it for me when you have the time.
BTW, I haven't seen your new buld since last week.Will there be no update ?
Is everything working with this ROM?
Can i get confirmation from someone who is actively using it..
MTP and everything else working?
pokadan said:
Gift was my pleasure
Only thing that remains for me to find out is if MTP is working on rom, so please check it for me when you have the time.
Click to expand...
Click to collapse
I just tried MTP (using OpenMTP-2.4.1 on MacOS) and it seems to work fine.
androidlover2019 said:
BTW, I haven't seen your new buld since last week.Will there be no update ?
Click to expand...
Click to collapse
There should be an update (or two!) today. The build rooster hung about midway through last week's build for deb, and was actually still running after seven days. I killed off the deb build process and it's progressing to the other devices, although much slower than it should be. I'll troubleshoot this after the regularly scheduled build completes late tonight.
(I'm using Arch Linux on this build machine, and it seems that something in the filesystem layer in kernel > 5.4.10 doesn't like operating under sustained heavy load)
I saw your new build today and have installed it. Thank you
However, The latest security patch has not been applied yet. Hope it will come in next build.
Thank you so much for maintaining the device.
Thank you wileyc !
wileyc said:
I just tried MTP (using OpenMTP-2.4.1 on MacOS) and it seems to work fine.
Click to expand...
Click to collapse
I have put the latest available rom lineage-14.1-20200202-UNOFFICIAL-P024.zip on my device and works flawlessly!
Million thanks
I have installed the newest one (built on 08 Feb)
the Android security patch was updated to Jan 2020! Thank you very much.
I am worried how long you will keep sharing your build weekly.
Hope next 2 years Thanks again.
I have also installed the latest. Thanks so much!
Thankyou for the update :good:
What about selinux?
Hi guys,
I am forced to upgrade my moto G5 plus due to a network update
In my moto G5 plus I have installed dotOS with android 11 and I am really happy with it, and I would like "clone" it on a Moto G Power.
Here are some questions:
1) since Moto G Power (2021) is not listed on dotOS but a GSI ARM64 available, has anyone experienced with that? I am also open to other custom ROMS (also Lineage OS doesnt have this devicelisted)
2) I also noticed that TWRP is not available for Moto G Power (2021), is there a good alternative or I have to use adb fastboot?
Thanks!
Edit:
I just found the thread:
[RECOVERY][UNOFFICIAL] TWRP 3.6.0-11 [BORNEO] Android 11 Based (updated 12/11/2021)
I can try that for question 2
Efone said:
Hi guys,
I am forced to upgrade my moto G5 plus due to a network update
In my moto G5 plus I have installed dotOS with android 11 and I am really happy with it, and I would like "clone" it on a Moto G Power.
Here are some questions:
1) since Moto G Power (2021) is not listed on dotOS but a GSI ARM64 available, has anyone experienced with that? I am also open to other custom ROMS (also Lineage OS doesnt have this devicelisted)
Click to expand...
Click to collapse
Presently I don't believe it is possible to have a custom rom as we need the kernel be released for it to have a chance, or a compatible similar device and its kernel.
Hi Onoitsu and thank you for the reply,
so I guess I could go with the stock ROM. I noticed that I can use https://mirrors.lolinet.com/firmware/moto/borneo/ has an official and blankflash (not sure what the difference is). If I understand the process correctly I could:
1) unlock bootloader
2) flash twrp in recovery
3) flash blankflash.zip (or official?) through twrp
4) flash magisk through twrp
5) restore my old phone dotOS android 11 backup through twrp
and I should have all the apps and data as in the old device?
Efone said:
Hi Onoitsu and thank you for the reply,
so I guess I could go with the stock ROM. I noticed that I can use https://mirrors.lolinet.com/firmware/moto/borneo/ has an official and blankflash (not sure what the difference is). If I understand the process correctly I could:
Click to expand...
Click to collapse
The blankflash is only if you can no longer flash anything by usual methods
Blankflash and EDL Mode
Is my device in EDL Mode?
How to boot into EDL Mode
Thanks for the info!
Should the reasoning above work if I use official instead of blankflash?
Efone said:
3) flash blankflash.zip (or official?) through twrp
Click to expand...
Click to collapse
Neither the blank flash nor official firmware are twrp compatible.
Thanks sd_shadow for the info, it is really helping me out.
I saw your post for using LSMA, but I couldnt find a Linux version. Is there one? Or the only other option I have is going through the fastboot process?
Can anyone tell me if there is going to be custom roms made for Borneo?
Hatrackman said:
Can anyone tell me if there is going to be custom roms made for Borneo?
Click to expand...
Click to collapse
Still the reason I cite in post 2 above, indeterminate, sadly.
Onoitsu2 said:
Still the reason I cite in post 2 above, indeterminate, sadly.
Click to expand...
Click to collapse
Mostly concerned because google has said they're going to stop their 'less secure app' thing at the end of this month and it might mean textnow will stop working outright for people that don't use play services.
Hopefully anyone working on making a custom rom for Borneo will see this thread and maybe give an idea if its going to happen.
Does this help?
If I wanted to start from scratch what would I need to know to make my own custom rom? Don't need a phone, will only ever use wifi. Just need microg basically.
The following statement is on the dotOS FAQs:
Q: My device is not supported! What should I do?!A: First reason can be that our development team doesn't have your device to support it or we no maintainer applied for this device. You can always use our GSI builds if your phone supports Treble Project.
Here we have this statement:
... Google requires every Certified Android device launching with Android 8.0 Oreo and above to support Treble.
Here borneo is listed as a supported device.
Does this mean dotOS GSI supports MotoGPower 2021 without the need of vendor blobs?
Onoitsu2 said:
Presently I don't believe it is possible to have a custom rom as we need the kernel be released for it to have a chance, or a compatible similar device and its kernel.
Click to expand...
Click to collapse
@sd_shadow
Two sites that potential rom developers may want to check out:
1) https://github.com/moto-common
check out: https://github.com/moto-common/andr...ernel/blob/12/dtb/bengal-moto-base-borneo.dtb
2) https://github.com/moto-sm6115
Scroll through the list of repositories, particularly in the moto-common site
@sdembiske that looks promising, I am willing to give it a shot and contribute to the community. Is there a good guide on how to build the kernel with vendor tree/blobs etc...?
Reference "Moto G Power 2021 XT2117-4 Firmware Extractions" - You will find the extracted kernel etc. in the boot.img extracted link that you can download - there are many other extractions that you hopefully can use to build a custom or AOSP rom.
Your best bet would be to add a pre-built kernel in the build - you can google that for how-to's.
Onoitsu2 said:
Presently I don't believe it is possible to have a custom rom as we need the kernel be released for it to have a chance, or a compatible similar device and its kernel.
Click to expand...
Click to collapse
The Xiaomi poco m3 has the same SoC and other innards as the Moto G Power 2021 and it also has unofficial Lineage OS 19 support. I am considering hitting them up and using their code as part of the build. I'm also requesting Motorola Mobility LLC to release the kernel source for Android 11. I already have a device tree for Borneo on my github. Me and Fazwalrus have a telegram chat set up for the ROM development here
Hello.I installed pixel experience custom rom [android 11 verson] in my redmi note 10 about 2 years ago.After that i again installed stock miui rom,which is currently using.I decided to install pixel experience again.But i can't find pixel experience android 11 verson.all are android 12 and 13.I need android 11,not 12 or 13.can anyone please help me find android 11 verson?
You can still find the GSI image
Release Pixel Experience 11.0 v313 · ponces/treble_build_pe
Sync with Phh's AOSP v313 Sync with October sources of PE
github.com
spider1163 said:
You can still find the GSI image
Release Pixel Experience 11.0 v313 · ponces/treble_build_pe
Sync with Phh's AOSP v313 Sync with October sources of PE
github.com
Click to expand...
Click to collapse
can't understand clearly what are you saying. I have no idea about GSI image.Is it possible to get android 11 rom from there?tell me please?
I didn't find the classic ROM for this version
GSI is generic system image, you need to follow this procedure
[GSI][PHH][13] Guide & Support [Mojito][Sunny]
Why should I use a GSI ? Mojito already have custom ROMs ¯\_(ツ)_/¯ Yes. But this thread exists due to the following reasons: You don't wanna fear about devs stop shipping updates. You don't wanna re-flash your custom recovery / kernel after each...
forum.xda-developers.com
spider1163 said:
I didn't find the classic ROM for this version
GSI is generic system image, you need to follow this procedure
[GSI][PHH][13] Guide & Support [Mojito][Sunny]
Why should I use a GSI ? Mojito already have custom ROMs ¯\_(ツ)_/¯ Yes. But this thread exists due to the following reasons: You don't wanna fear about devs stop shipping updates. You don't wanna re-flash your custom recovery / kernel after each...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for helping.I studied about gsi and think that,it is not a perfect option for daily use.I need android 11 custom rom with stability.Please don't forget to share with me,if you ever find any way or link to get pixel experience older android verson rom. Again Thanks for reply.
AhmedRadowan25 said:
Thanks for helping.I studied about gsi and think that,it is not a perfect option for daily use.I need android 11 custom rom with stability.Please don't forget to share with me,if you ever find any way or link to get pixel experience older android verson rom. Again Thanks for reply.
Click to expand...
Click to collapse
I think i can find it but i will need to upload it. Wait.
AhmedRadowan25 said:
Thanks for helping.I studied about gsi and think that,it is not a perfect option for daily use.I need android 11 custom rom with stability.Please don't forget to share with me,if you ever find any way or link to get pixel experience older android verson rom. Again Thanks for reply.
Click to expand...
Click to collapse
https://sourceforge.net/projects/pixelexperiencerom/files/mojito/ here it is my friend. Plus and normal editions, vanilla and gapps variants. I need a favor if you can test, i dont have pc right now so i dont wanna risk it. See if you can flash this 11 version with the recovery from 13 version. Im on 13 but i want to test 11 and cannot sideload recovery or anything else because i dont have pc or otg either. Only have sdcard.
gabsvm1 said:
https://sourceforge.net/projects/pixelexperiencerom/files/mojito/ here it is my friend. Plus and normal editions, vanilla and gapps variants. I need a favor if you can test, i dont have pc right now so i dont wanna risk it. See if you can flash this 11 version with the recovery from 13 version. Im on 13 but i want to test 11 and cannot sideload recovery or anything else because i dont have pc or otg either. Only have sdcard.
Click to expand...
Click to collapse
Thank you very much brother.Take love.I will surely inform you if i can do it.
AhmedRadowan25 said:
Thank you very much brother.Take love.I will surely inform you if i can do it.
Click to expand...
Click to collapse
Your welcome! Let me know if it can be done and your experience in the rom, ill surely will install it too if it can be done