{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This rom is an attempt at trying to make the LG G Watch feel as close to Wear OS 3.0 as possible. You will find that font, icons and some UI elements are updated to mimic the latest Wear OS updates. At the same time I also tried to improve both the battery life and the overall response time while also adding some extra customization. If you are curious about the whole changelog just read the Changelog/Features>> section below. Let me know if you encounter any issues and have fun!
Flashing instructions/Downloads >>
BEFORE PROCEEDING MAKE SURE YOU HAVE THE ADB DRIVERS INSTALLED AND THE BOOTLOADER UNLOCKED
• Download the twrp img (twrp-3.0.0-0-dory+squashfs.img) linked below
• Download the newdory0.8.img and the boot2.img available at the links below
• Enter bootloader (reboot and swipe from up-left corner to the opposite one at lg boot screen)
• Connect your watch to your pc and open up a terminal
• Now type fastboot flash recovery /path-to-twrp-3.0-squashfs-img
• Reboot into TWRP using fastboot reboot recovery
• Click on "Allow Modifications" then go into "Wipe" and "Factory Reset" then Swipe Right >>
• Don't worry about the errors, now reboot into bootloader again (Home >> Reboot >> Bootloader)
• Back in the terminal type fastboot flash boot /path-to-boot2-img and enter
• Then type fastboot flash system /path-to-newdory-img
• Reboot your watch (with fastboot reboot for example)
• Wait patiently, once booted up leave the watch updating it's apps for a few mins/hours, after that, enjoy!
newdory0.8.img boot2.img twrp-3.0-squashfs.img
Follow the newdory telegram for more info: https://t.me/newdory
Disclaimer: If you are facing bootloops after following precisely the above steps you must restore your watch to stock and then follow the flashing steps again, you can go back to stock using the LG G Watch Tool by RootJunky
Changelog/Features >>
Spoiler
Latest newdory 0.8 (24/01/2023):
• Updated build.prop (optimal af now)
• Better Phone Shortcut (source)
• Solved issues with Google Play Store
• Added another level of brightness (lowest possible)
• Updated UI to look like Wear OS 3.0 (wip)
• Updated Settings app look (Wear 3.0 style)
• Added the Location panel in Settings
• Updated fonts to Google Sans Text (Wear OS 3.0 style)
newdory 0.7 (11/12/2022):
• Updated Agenda icon
• Updated HomeButton icon
• Updated Google Play app icon
• Removed Reminders app
• Added more text sizes choices in settings
• Updated Flashlight icon and app resources
• Enabled Phone app shortcut in the apps menu
• Pre-installed Google Keep (not available on playstore)
• Made Google Translate icon round
• Made Google Maps icon round
• Updated Contacts and Phone icons
• Updated DeskClock icons (Timer, Stopwatch, Alarm...)
• Cleaned up build.prop
• Tweaked some DEX compilation parameters
• Improved app installation time
• Small changes and various improvements
Latest boot2 (23/10/2022):
• Fixed the ADB unauthorized device issue
boot2 (14/09/2022):
• Updated ramdisk to 2.0_v1 by invisiblek
• Improves boot speed
• Improves overall performance
• Enables adaptive LMK
• Adds support for ext4 /system partition type (hopefully in the future)
• Updates default cores to smartmax eps
• Mpdecision support
newdory 0.6 (14/09/2022):
• Tweaked some low-battery parameters
• Added the General panel in settings
• Enabled doze for gms services (might revert)
• Optimized background operations
• Pre-updated Clock app
• Updated to Android 12L emojis
newdory 0.5 (20/10/2021):
• "Ok Google" working
• Updated Android 12 emojis
• Made calculator icon round
• Made agenda icon round
• Updated WearOS app icon
• Pre-updated Play store app (latest material you version)
newdory 0.4 (25/08/2021):
• Updated Google app, again
• Cleaned up build.prop
• Added more brightness levels (lower ones)
• Slightly better app memory management
newdory 0.3 (17/08/2021):
• Pre-updated Play store app
• Pre-updated Clock app
• Updated Google app
• Added back Bugreport (fixes screen capturing)
• Added Lge Compass
• Added Rom version flaw inside settings
• Fix product image (now displays an lg g watch on phone)
• Reduced brightness to match stock values
• Made Google Sans font a little thicker
• Fixed some lenok values inside framework
newdory 0.2 (06/06/2021):
• Removed unecessary system files (to save some space)
• Improved overall system response
• System rw faster than before
• Forced UI hw rendering (will revert tho)
newdory 0.1 (01/06/2021):
• Updated Google app
• Fixed deprecated weather cloned app
• Added LGW100 Stock watchfaces
• Added GoogleSans as the default font
• Updated settings icon (matches latest android ver)
• Made the entire UI black (OLED style, matches latest android ver)
• Added Google Calculator app (not available on playstore)
• Changed pm sleep behaviour (improves battery?)
• Disabled most of kernel error checking
• Updated kernel to use all 4 cores (credits to invisiblek)
• Used the latest lenok build NWS2.170620.003
• HomeVirtualButton app included (credits to svprm)
• Also nope, it's not rooted
Issues/Bugs >>
• The 0 digit is slightly out of the drawable canvas in the DigitalElements watchface (minor bug)
• Unable to send Whatsapps using google assistant/contacts app (Google's fault)
Tips to save battery & improve response time >>
• Turn off "Always-on screen" (settings > display > always-on)
• Disable "Ok Google" and voice output (settings > personalization)
• Disable all gestures (settings > gestures)
• Disable "wake up to notifications" (settings > notifications)
• Lower the brightness all the way :v
Screenshots >>
Spoiler
Credits/Info >>
This newdory system img is a modified/custom/updated version of the one available on 4pda by shyster.
The boot img is as well an updated version of the one and only invisiblek.
The link for the TWRP img provided is extracted from this thread.
Credits to ab123321 and syshter and to everyone that contributed to the lenok2dory project. Also credits to the awesome invisiblek for the kernel he made back then for Android Wear 2.0
Software disclaimer: If you are facing any issues or bugs feel free to write here or DM me, I'll try my best to help y'all. That said, I'm not responsible of any possible damage that happens to you or your device when using/flashing this software.
Custom Rom version: 0.8
Android version: 7.1.1 (Nougat)
Wear OS support: 2.35.0.325323493
ROM Kernel: 3.10.X (invisiblek_v8.1)
Last Rom Update: 24/01/2023
Github Source (WIP)
Latest Updates:
Latest newdory 0.8 (24/01/2023):
• Updated build.prop (optimal af now)
• Better Phone Shortcut (source)
• Solved issues with Google Play Store
• Added another level of brightness (lowest possible)
• Updated UI to look like Wear OS 3.0 (wip)
• Updated Settings app look (Wear 3.0 style)
• Added the Location panel in Settings
• Updated fonts to Google Sans Text (Wear OS 3.0 style)
New rom link available here
Finally got around UI modding again and this time I think I went for the biggest UI changes. This update changes some UI elements to look like Wear OS 3.0, specially the drawers items. You will notice also some big changes in the Settings app since I reordered the main elements and updated most of the icons so that it looks as close to a pixel watch as possible (also added the Locations panel heh). Updated and cleaned up the build props as well (again huh) and also included a better and lighter Phone Shortcut app. Finally I updated the Google Play app to the latest possible (this was a pain in the ass and I better not explain why) and also updated the system fonts to the Google Sans Text variant (Introduced in A12~ as the default font).
Love this so far! Great idea to revive the old watch. Thanks for making it!
Thanx you bring my watch back to life !!!
ps: need to test it
edit test : what can i say .... it work very good after 4 days i am impressed very good work
sorry but after reboot my g watch goes to recovery mod, whay can i do?
Alexoxo said:
sorry but after reboot my g watch goes to recovery mod, whay can i do?
Click to expand...
Click to collapse
Try "fastboot continue" command. Unfortunately, it is not a permament fix. It will boot into twrp again afterevery restart.
KardchCode said:
View attachment 5327403
Soo I found my watch a few days ago and I thought about giving it a second life, and since there is no develoment or updates for lenok anymore I tought it might be a good idea to make my own rom with an android 8.0 style to it. I tried my best to make the system look as close to android 8 as possible while also updating some apps and improving the overall experience. You might wanna give it a try!
Flashing intructions >>
- Download the newdory.img and the boot.img available at the links below
- Enter bootloader in your watch (swipe from top left to bottom right corner at lg boot screen)
- Open a terminal and type fastboot -w (this will factory format your watch)
- Now type fastboot flash boot path/to/boot/image/
- Then type fastboot flash system path/to/system/img/called/newdory.img
- Reboot your watch (with fastboot reboot for example)
- Wait patiently, once booted up leave the watch updating it's apps for a few hours, after that, enjoy your new oreo-styled watch!
Download boot.img | | Download newdory.img
Changelog/Features >>
Spoiler
Latest newdory (06/06/2021):
- Removed NOTICE.html.gz (not needed)
- Improved overall system response
- Made system way faster than before (also when downloading updates)
- Forced UI hw rendering
- Updated bootanimation
- Updated emojis to android 12
newdory (01/06/2021):
- Updated google search app to latest version (june 1 2021)
- Removed useless bugreport app
- Removed depercated weather cloned app
- Added LGW100 Stock watchfaces
- Added GoogleSans as the default font (android 8 style)
- Updated settings icon (android 8 style)
- Made the entire UI black (android 8 style)
- Added Google calculator app (not available on playstore)
- Changed pm sleep behaviour to save battery
- Disabled most of kernel error checking
- Improved performance a bit
- HomeVirtualButton app is included yep (credits to svprm)
- Also nope, it's not rooted
Planned updates:
- Bugfixes
- Google app upgrades (wating for updates)
- Reduce minimun brightness
- Battery improvements
- Add stock LgeCompass app
Issues >>
- Ok Google not working (blame google for this)
- Default digital clock numbers are sometimes just a bit "out of canvas"
- Battery drain (wear os 2.0 fault)
- Wear os companion app displays a G watch R (not a big deal, to be solved)
Tips to save battery & improve response time >>
- Disable Ok Google and voice output (clockscreen > swipe left, > settings at the bottom)
- Disable animations, RECOMMENDED (enable developer settings and disable them there)
- Disable Gestures
- Disable "wake to notifications"
Screenshots >>
Spoiler
View attachment 5326643 View attachment 5326645
View attachment 5326673 View attachment 5326647
View attachment 5326653 View attachment 5330641
Latest one is the boot animation.
Also, ignore my spanish system and the screen crack at the top thx xd
Credits >>
This system img is a modified-custom-updated version of the one available on 4pda by shyster (latest update on 21/05/2020). All credits to him for the base img, also all of his changes are present in the newdory.img linked above, enjoy! ;D
Shyster's old img changelog >>
Spoiler
Old changelog from shyster on 4pda (21/05/2020):
- Built the system using latest lenok img NWS2.170620.003 (from 2017)
- Updated Google play applications + deskclock
- Deleted unused lg apps
- Updated Google search app (from may 1 2020)
- Increased memory and the number of streams for Dalvik
- Disabled logcat (improves performance a bit)
- Made calls to display without delay
Credits to ab123321 and syshter and everyone that contributed to the lenok2dory porting project. Also credits to invisiblek for the awesome kernel he made back then for aw2.0.
If there's any issue with the rom or anything please write an answer here or contact me at [email protected]. I'm not responsible of any possible damage that happens to your device when using this. The following are some extra details:
ROM OS: 7.1.1 Nougat
Wear OS support: 2.35.0.325323493
ROM Kernel: 3.10.X (invisiblek)
Last Update: 06/06/2021
Click to expand...
Click to collapse
Great ROM! However, I am experiencing some issues with it, one of which is probably my fault.
1. With my current setup, my watch always boots into recovery even if I select boot to the system. The only way I am able to boot it into the system is by using the "fastboot continue" command.
2. My watch has a white spot on bottom right of the screen, which I am sure is not a hardware issue as it worked fine in TWRP and when I initially boot in the system.
And, yes, I did try flashing everything again. So, if you know how I could fix this, I would highly appreciate that
SokkolG said:
Great ROM! However, I am experiencing some issues with it, one of which is probably my fault.
1. With my current setup, my watch always boots into recovery even if I select boot to the system. The only way I am able to boot it into the system is by using the "fastboot continue" command.
2. My watch has a white spot on bottom right of the screen, which I am sure is not a hardware issue as it worked fine in TWRP and when I initially boot in the system.
And, yes, I did try flashing everything again. So, if you know how I could fix this, I would highly appreciate that
Click to expand...
Click to collapse
Okey, well for the first issue I would recommend going inside twrp recovery > wipe > factory reset > swipe right. Then reinstall the rom again
And for the second one, it's not an issue, it's an app that comes pre-included so that you can open the apps list by pressing the white dot on the corner. You can customize it by going into apps > HomeButton > and changing transparency or position there
SokkolG said:
Great ROM! However, I am experiencing some issues with it, one of which is probably my fault.
1. With my current setup, my watch always boots into recovery even if I select boot to the system. The only way I am able to boot it into the system is by using the "fastboot continue" command.
2. My watch has a white spot on bottom right of the screen, which I am sure is not a hardware issue as it worked fine in TWRP and when I initially boot in the system.
And, yes, I did try flashing everything again. So, if you know how I could fix this, I would highly appreciate that
Click to expand...
Click to collapse
The white spot is intentional. In WearOS 2.0, you can only access some features with a hardware button. Because the G Watch does not have a physical side button, this white spot serves as that. It is a virtual button that emulates the button on the later-released G Watch R.
I also have the same issue with the "fastboot continue" command. However, I only started to experience this when I unpaired the watch and it tried to do a factory reset. Maybe the boot flags were messed up, but I have no idea. I'll try the fastboot continue command and see if I can get it to work. I haven't tried that since when I started having the issue, I just left my watch be.
EDIT: I didn't see OP's response when writing this. Basically this can be ignored
KardchCode said:
View attachment 5327403
Soo I found my watch a few days ago and I thought about giving it a second life, and since there is no develoment or updates for lenok anymore I tought it might be a good idea to make my own rom with an android 8.0 style to it. I tried my best to make the system look as close to android 8 as possible while also updating some apps and improving the overall experience. You might wanna give it a try!
Flashing intructions >>
- Download the newdory.img and the boot.img available at the links below
- Enter bootloader in your watch (swipe from top left to bottom right corner at lg boot screen)
- Reboot into TWRP recovery and choose Wipe > Factory Format > Swipe right.
- Now reboot into bootloader (aka fastboot) again
- Now type fastboot flash boot path/to/boot/image/
- Then type fastboot flash system path/to/system/img/called/newdory.img
- Reboot your watch (with fastboot reboot for example)
- Wait patiently, once booted up leave the watch updating it's apps for a few hours, after that, enjoy your new oreo-styled watch!
Download boot.img | | Download newdory.img
Changelog/Features >>
Spoiler
Latest newdory (06/06/2021):
- Removed NOTICE.html.gz (not needed)
- Improved overall system response
- Made system way faster than before (also when downloading updates)
- Forced UI hw rendering
- Updated bootanimation
- Updated emojis to android 12
newdory (01/06/2021):
- Updated google search app to latest version (june 1 2021)
- Removed useless bugreport app
- Removed depercated weather cloned app
- Added LGW100 Stock watchfaces
- Added GoogleSans as the default font (android 8 style)
- Updated settings icon (android 8 style)
- Made the entire UI black (android 8 style)
- Added Google calculator app (not available on playstore)
- Changed pm sleep behaviour to save battery
- Disabled most of kernel error checking
- Improved performance a bit
- HomeVirtualButton app is included yep (credits to svprm)
- Also nope, it's not rooted
Planned updates:
- Bugfixes
- Google app upgrades (wating for updates)
- Reduce minimun brightness
- Battery improvements
- Add stock LgeCompass app
Issues >>
- Ok Google not working (blame google for this)
- Default digital clock numbers are sometimes just a bit "out of canvas"
- Battery drain (wear os 2.0 fault)
- Wear os companion app displays a G watch R (not a big deal, to be solved)
Tips to save battery & improve response time >>
- Disable Ok Google and voice output (clockscreen > swipe left, > settings at the bottom)
- Disable animations, RECOMMENDED (enable developer settings and disable them there)
- Disable Gestures
- Disable "wake to notifications"
Screenshots >>
Spoiler
View attachment 5326643 View attachment 5326645
View attachment 5326673 View attachment 5326647
View attachment 5326653 View attachment 5330641
Latest one is the boot animation.
Also, ignore my spanish system and the screen crack at the top thx xd
Credits >>
This system img is a modified-custom-updated version of the one available on 4pda by shyster (latest update on 21/05/2020). All credits to him for the base img, also all of his changes are present in the newdory.img linked above, enjoy! ;D
Shyster's old img changelog >>
Spoiler
Old changelog from shyster on 4pda (21/05/2020):
- Built the system using latest lenok img NWS2.170620.003 (from 2017)
- Updated Google play applications + deskclock
- Deleted unused lg apps
- Updated Google search app (from may 1 2020)
- Increased memory and the number of streams for Dalvik
- Disabled logcat (improves performance a bit)
- Made calls to display without delay
Credits to ab123321 and syshter and everyone that contributed to the lenok2dory porting project. Also credits to invisiblek for the awesome kernel he made back then for aw2.0.
If there's any issue with the rom or anything please write an answer here or contact me at [email protected]. I'm not responsible of any possible damage that happens to your device when using this. The following are some extra details:
ROM OS: 7.1.1 Nougat
Wear OS support: 2.35.0.325323493
ROM Kernel: 3.10.X (invisiblek)
Last Update: 06/06/2021
Click to expand...
Click to collapse
Hi, this rom isnt Wear OS support: 2.35.0.325323493
i see 2.00 ?
dayi said:
Hi, this rom isnt Wear OS support: 2.35.0.325323493
i see 2.00 ?
Click to expand...
Click to collapse
Once the watch gets its apps updated it updates wear os internal app to that version which is one of the latest supported.
Where are you seeing this?
Alexoxo said:
sorry but after reboot my g watch goes to recovery mod, whay can i do?
Click to expand...
Click to collapse
first flash newdory.img then flash boot.img then recovery.img click with sticks and choose recovery mode when you enter you move down and select wipe data and move right and choose yes with right shift and ready
Is it have custom kernel? Instead dual core or quad mp decision?
raditzava said:
Is it have custom kernel? Instead dual core or quad mp decision?
Click to expand...
Click to collapse
The kernel included in the post and the recommended one is the 4 core invisiblek one, but you can install a different one if u want
KardchCode said:
The kernel included in the post and the recommended one is the 4 core invisiblek one, but you can install a different one if u want
Click to expand...
Click to collapse
Any suggest install magisk module?
raditzava said:
Any suggest install magisk module?
Click to expand...
Click to collapse
No need to, in fact watch works just perfect without anything else
KardchCode said:
No need to, in fact watch works just perfect without anything else
Click to expand...
Click to collapse
Aight you have a plan to fix for rest of bug in OP thread?
raditzava said:
Aight you have a plan to fix for rest of bug in OP thread?
Click to expand...
Click to collapse
Yeah, I have almost all bugs fixed except Google hotword which I can't due to Google having the issue. I will push the update soon after vacations
KardchCode said:
Yeah, I have almost all bugs fixed except Google hotword which I can't due to Google having the issue. I will push the update soon after vacations
Click to expand...
Click to collapse
Thanks, happy vacations then
KardchCode said:
Yeah, I have almost all bugs fixed except Google hotword which I can't due to Google having the issue. I will push the update soon after vacations
Click to expand...
Click to collapse
Anyfix for home button when press hold to google voice?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys! You may ask yourself what this rom is about and what you can expect from it, so it's basically something similar to the SuperMan-Rom on the Galaxy S7/S7 edge! It has many custom featuers, but you will find it below in the feature list :thumbup:
As you maybe know I'm a little fanboy from samsung, means I really love the stock look of the UI and the rom will always be based on most recent version from samsung, current base used is G955FXXU1CRC7 (compatible with S8 and S8+)
I wish you much fun reading through the features and while using this rom! Enjoy
So this rom should be installed by anyone loving to use a rom close to stock BUT with many mods inside aroma/rom control.
Also I'd like to make the already fast galaxy s8 even more faster as it already is! Let's see if we can reach this goal
Nobody is allowed to take stuff from my rom without asking me! Thank you.
IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Rom features of V2.0.0 Oreo:
- Based on latest G955FXXU1CRC7 Nougat base
- Prerooted with SuperSU V2.82 SR5 or MagiskSU (choose in aroma)
- Magisk V16.3 (aroma selectable)
- Latest Busybox installed (aroma selectable)
- Aroma installer! with support up to 4GB zip files
- CSC features can be choosen and installed in aroma (such as Applock, Floating Message, Call recording and more!)
- Adblocker enabled or disabled (choose in aroma)
- Full rom control!! App name is BatMan Settings Free
- Fully deodexed (framework can be chosen odex/deodex in aroma)
- Rom informations and logo inside settings
- LED indicator settings
- choose IOS or stock emojis in aroma
- DM-Verity disabled
- Force encrypt disabled
- ADB fully working
- Modded SystemUI with many tweaks in the BatControl app (like header colors, qs colors and notification colors)
- 3Minit Clock/battery in romcontrol
- Custom clock positions and customizations in romcontrol
- USB Plug/Unplug disable wake up
- Remove high volume warning for headphones
- Torch on lockscreen
- Knox stuff can be choosen in aroma
- Stock CRC7 Kernel or BatStock-Kernel(choose in aroma)
- Based off from latest touchwiz source available at this moment
- Many apps are selectable in aroma debloat menu
- Selinux permissive on custom kernel
- Ram bar in recents
- Matrix animation in recents
- Sound Mod with lot improvements! (choose in aroma)
- Latest March Security Patch
- Many other features, can't list them all, please read changelog to see what changed over the time
How to install the rom:
For advanced users:
0. Make sure to have a backup somewhere on external storage
1. Make sure to be on most recent TWRP, bootloader and modem
2. Flash the rom
3. If you need VoLTE or Wifi Calling, flash your correct carrier CSC
4. Done
For normal users:
0. Boot your phone, enable OEM unlock in developer settings
1. Flash TWRP with Odin (if you don't have odin, download it here), following this thread S8/S8+ TWRP until it works correctly (to access download mode, press bixby+volume down+power on while phone is turned off) (YOU HAVE TO BE ON 3.1.1-2 TWRP OR HIGHER TO SUPPOR THIS ROM)
2. Make sure you are using most recent bootloader and modem, latest one available here on Android File Host (You should have at least an Oreo bootloader/modem installed)
3. Now boot into TWRP by pressing bixby+volume up+power on while phone is turned off
4. If TWRP asks you about allowing system to be edited, swipe yes to confirm
5. In TWRP, go to wipe, format data (a keyboard will pop up now), type "yes" (this will wipe all your data, make sure to have a backup!)
6. After this, reboot recovery and start the rom installer
7. Select your preferences in my aroma installer
8. If you selected to auto update bootloader in aroma, the installer will reboot automatically
9. You can still install my CSC selection if you are customer of a carrier which is not supported by default CSC inside the rom
10. Wait till the rom boots up
11. After setting up, open BatMan Settings Free and let the app apply my default settings!
12. Enjoy the rom!
Downloads for SM-G95XF/FD/N:
V2.0.0 Final on Android File Host
Download via our Server (you need to be signed in)
Bootloader/Modems SM-G95XF/FD/N
CSC Selection V1.2.5
Useful Links:
Our new Grifo Development website
Telegram BatMan News Channel
Telegram BatMan-Rom Chat
Telegram Dark Knight Theme
Known Bugs:
- Knox related features such as secure folder, samsung pay or samsung pass may not work any longer after rooting your phone
Credits:
- Samsung for the base
- SuperR for his awesome Kitchen
- Chainfire for his SuperSU
- topjohnwu for systemless Magisk V12
- amarullz for aroma and nkk71 to make it compatible with bigger zip files
- wubydax and daxgirl for basic RomControl
- myellow for all the great animations!
- TheFreak for his work as designer and his help with the website
- mwilky for his fingerprint after reboot mod, the colors control and other mods
- Asc1977 for a few mods I already used on SuperMan
Support:
If you enjoy this I would be really lucky if you would hit thanks :victory:
And if you really really like it, here is a donation link
:good:
PayPal
BM Settings App on PlayStore
XDA:DevDB Information
BatMan-Rom SM-G95XF, ROM for the Samsung Galaxy S8
Contributors
Tkkg1994
Source Code: https://gitlab.com/Tkkg1994/BatMan-Rom
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Custom TWRP Recovery
Based On: Stock Based
Version Information
Status: Stable
Current Stable Version: V2.0.0
Stable Release Date: 2018-05-04
Created 2017-07-14
Last Updated 2018-05-25
Changelog:
BatMan-Rom V1.0.0
- Initial Release on XDA
BatMan-Rom V1.1.1
- Rebased on latest AQF7 release
- June security patch
- Fixed the gap in pulldown menu
- readded private mode(thanks to @mwilky for finding the right mount points for private mode! )
- added a switch in RC for immersive mode
- updated csc to AQF7
- added a switch for wake the device with the volume buttons
- fake system status to official
- removed camera mod, it didn't work anyway
- updated magisk to latest v13.1
- updated all kernels with AQF7 base
- updated supersu to v2.82 sr1
- made the rom compatible with s7/s7e edge devices
- added an option to control icon colors/progress bars etc
- added a custom music apk to be colored (thanks to @Therassaad)
- many more things, check out the rom
BatMan-Rom V1.2.0
- Rebased on latest AQGB release (I know AQH3 is out, but until samsung releases a new kernel source it normally takes a few weeks that's why this base is used for now)
- July security patch
- Added navbar icon colors @mwilky
- Added navbar to get colors from statusbar (as long as the app doesn't set a default color) @mwilky
- Added in "misc" batman settings to disable touchkey light (s7 only of course)
- Readded custom color selection for navbar in stock settings
- Removed a few camera mods which weren't working
- Updated CSC to AQGB, also added all CSC in OMX (including BTU)
- Updated all Kernels to latest source and ramdisk
- Updated SuperSU to 2.82 SR3
- Added a the S Power Planning feature (forward ported from galaxy j7 prime), choosable in aroma as a csc mod
- Updated OperaMax apk to not show as chinese apk, many people meant it's a trojan lol
- Updated adblocker host file
- Updated all included modems and bootloaders
- Added a stock kernel even for the s7, so you can choose stock there as well!
- Updated Magisk to latest V13.5 beta version
- Added modded camera into aroma @zeroprobe
- Added 100+ fonts apk into aroma
- Updated busybox to most recent version
- Updated dual speaker mod to most recent version
- Added VoLTE and wificalling into pulldown menu
- Reduced download size to 3GB only (hahahaha only 3GB )
BatMan-Rom V1.3.0
- Rebased on most recent AQH3 firmware update
- August security patch
- Added navbar height tweak @mwilky
- Added force expand notifications @thereassaad
- Updated all kernels to most recent source drop and linux version
- Updated magisk to V13.6
- Updated SuperSU to V2.82 SR3
- Added batman gif animations
- Fixed gif overlapping device informations
- Readded autostart manager in modded settings
- To disable the volume warning, there is now a switch in notification panel options to enable/disable it
- Fixed long press back not bringing up menu @mwilky )
- Removed OTA Updater. This services is outdated and not working anymore.
- Readded touchwiz double tab features! Double tap anywhere on launcher to do custom actions (the only thing which does not work yet is starting the torch light)
- Updated samsung music to most recent version with all the custom mods thanks to @thereassaad
- Fixed next alarm on lockscreen showing the wifi icon
- Fixed heads up display not working when switching in RC
- Added a new custom signal icon
- Edge lightning can now be customized! Choose a custom color OR if it should take the color from the app itself!
- Added alarm volume control to sound
- Fixed adaway app not being installed even if you selected adblocker
- Removed viper mods, since they can easy be outdated it's better to keep them outside. I hope people will go and visit the threads of the sound mods
- Updated included bootloader and modem to most recent version
- Updated csc to AQH3
- Added many new CSC mods, BUT BE AWARE, 5 SIGNAL in statusbar kills Wifi-Calling/VoLTE!
- Removed the last not working camera mod: video collage!
- Maybe some more things I already forgot, have fun!
BatMan-Rom V1.4.0
- Rebased on most recent AQI7 firmware update
- August security patch (there is no single september security patch released by samsung)
- This base fixes blueborne problems (which was samsungs main goal)
- Updated all kernels to most recent source drop and linux version (AQI7 for S8 and DQIC for S7)
- Updated magisk to V14.2
- Updated SuperSU to V2.82 SR5
- Added memory cleaner next to brightness slider
- Added listview animations thanks to @asc1977!
- Added a new telephony icon to romcontrol
- Added quickunlock thanks to @mwilky and @Grouxho
- Added Xposed V88.1 for magisk, why only magisk? Stock xposed can't be installed via an aroma script to-date, hoping rovo will change this in the future
- Updated all busybox to latest 1.27.1
- Updated adblocker
- Fixed lags in notification panel, for custom edge lightning you simply need to update the edge lightning service with samsung store!
- Fixed USB wakeup switch not working
- Updated launcher to support gestures even with latest update
- Updated included bootloader/modems for F/FD models
- Maybe some more things I already forgot again
BatMan-Rom V1.5.0
- Rebased on most recent AQK7 firmware update
- November Security patch included
- This base fixes krack problems (krack explained: Krack)
- Updated all kernels (AQK7)
- Updated Magisk to V14.5
- Updated Xposed to 88.2 (magisk version, aroma choosable)
- Updated Xposed Installer to 3.4
- Updated adblocker host file
- Updated bootloader/modem to AQK7
- Updated zeroprobes camera mod
- Stock camera does now only feature stock camera mods, for advanced camera mods please use the modded app (which includes almost all modes)
- Fix notification background image not sticking after a reboot
- Fix carrier label on pulldown overlapping with navbar
- Fix lag on pulldown, introduced by force expand notifications. THIS MOD HAS BEEN COMPLETELY KILLED
- Add qs panel number counts to romcontrol
- Removed most google apps from debloater, why: the zip file increases all the time, you can download the apps easily via playstore, also you have them installed as user apps then
- Add modded youtube to play background videos and watch videos without ads
- Add modded GBWhatsApp and GBInstagram thanks to the GB team!
- Moved some more bloatware related to Gear VR into Gear folder
- Added "edge panel" to debloat menu
- Update update-binary
- Added googles web view by default, so we don't need google chrome
- Busybox installer updated
BatMan-Rom V2.0.0 Final:
- Updated to CRC7 base (March update). I'm aware that CRD7 is out, but I already finished this base update while the other one rolled out...
- Reworked most mods from Nougat to Oreo, some are new, some I had to leave behind. You'll find out when visiting the romcontrol app
- Included an aroma choice to flash with odex or deodex framework (this is the ONLY change compared to the beta release). If you don't know anything about the odex/deodex issue, I suggest you to read up on that a bit! I talked a lot about it in here
- Updated magisk to latest 16.3 (16.4 magisk is causing issues sometimes)
- Updated included BL/CP to CRC7
- Updated modded camera
- Updated dual speaker sound mod
- Updated busybox
- Updated GBinstagram/GBwhatsapp
- Updated modded youtube
- Updated xposed to latest Oreo beta
- Updated modded samsung music app (thanks to @thereassaad )
- Updated all included kernels to CRC7 base
- Many thanks to @asc1977 and @mwilky who have helped me so much to get this update done! Without them this wouldn't have been possible with all those mods!
Useful posts and links
App on PlayStore:
Find my own BatMan app on PlayStore: BM Settings App
Odin:
Find all latest odin and samsung tools on this link: Samsung-Tools
TWRP links:
TWRP S8+ Thread
Official TWRP website for S8+
Bootloader and Modems:
SM-G955F/FD/N BL and CP (all models in one folder!)
SM-G955F/FD BL and CP
SM-G955N BL and CP
Magisk related Threads:
Magisk V13.2
Magisk Discussion
How-To create a Magisk module
Phh magiks superuser
Magisk module collection
Root related Threads:
Phh's superuser
Phh's hidesu
Phh's official apk
Phh's material APK
Stable SuperSU releases
Beta SuperSU releases
Chainfires suhide
Kernels Threads:
BatStock-Kernel
Notorious Kernel
Roms made by me:
BatMan-Rom which you are currently on its thread
BatStock-Rom which is as close to stock as possible with some nice additions.
Samsung Links:
Sammobile Website
Latest samsung apks
Samsung Opensource Center
Live samsung updates
Fast firmware downloads
Thread about CSC:
Download latest CSC from CSC Selection V1.0
All CSC's ever released
How to donate:
Donate via PayPal.me
Donation via normal PayPal
Questions and Answers
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader, modem and TWRP recovery. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G95XF/FD/N. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 835 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon (like a cloud) appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Q: I installed Viper or other sound mods, but they won't work, why?
A: You most likely missed to freeze sound alive, if you did this and it's still not working you it's due to the kernel. Stock kernel doesn't support these mods since we need a permissive kernel!
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from batman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore BatMan control settings after a clean base update, why?
A: Backup for BatMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in BatMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Encryption does not work anymore on Nougat roms with TWRP installed, sorry to tell...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: There are some test version of Xposed on N, I don't recomend to install it!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent BatStock Kernel
3. Flash Magisk V13.3
4. Open Magiks Manager, go to settings
5. Enable MagiskHide, systemless hosts and systemless busybox
6. Reboot the phone and check safetynet!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: What to do when I can't login to snapchat?
A: Clean install the rom without root and login to your snapchat, save the app with titanium backup, flash back root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Questions about Kernels:
Q: I want to switch kernel, how?
A: We have systemless we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Hey guys, this isn't anything new, I just moved the BatMan thread into the criss cross development section as it's way more active in here :fingers-crossed: :good:
How can i delete these green android icons? Delete not make them invisible
Gesendet von meinem SM-G950F mit Tapatalk
Hi
Animated scale for french langage is possible To 0,25 ?
Thanks
what about s8 forum i find here only s8+
Sent from my SM-G950F using XDA-Developers Legacy app
spackeddie01 said:
How can i delete these green android icons? Delete not make them invisible
Gesendet von meinem SM-G950F mit Tapatalk
Click to expand...
Click to collapse
Are you using a custom launcher? I assume it's due to this one!
ounerkouks said:
Hi
Animated scale for french langage is possible To 0,25 ?
Thanks
Click to expand...
Click to collapse
English, spanish, german, french and dutch should it be if I'm correct
sielhadi said:
what about s8 forum i find here only s8+
Sent from my SM-G950F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Look at the thread title, it says G95XF, which means G950F and G955F. I moved all my threads into s8/s8+ combined ones
i bought the super setting pro does it adequate with bat setting pro when it will be released
Sent from my SM-G950F using XDA-Developers Legacy app
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
Hi,
Its my first root experience with the s8.
I love the rom.
However, I am unable to control the bixby button. I try to modify it behavior with bxActions or similar but nothing happens.
Is it depend on some of the Samsung apps? If so, which one (or is it possible to just have it working)
Sent from my SM-G950F using Tapatalk
Hi folks, i flashed Dolby atmos in aroma, but if i try to open the app, the process stop working. Viper works fine. Is there a fix?
Sent from my SM-G950F using XDA-Developers Legacy app
tiesto14 said:
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
Click to expand...
Click to collapse
you can find it in advanced settings
Palm Swipe to Capture not working!
Hi there!
I am currently running BatMan-ROM V1.1.1 and kernel version (4.4.13), I'm not sure if that's your kernel or the stock one because I don't remember the aroma choice I made.
I have tried disabling and re-enabling all the advanced features but palm swipe to capture screen still won't work. Any idea as to why that is happening? It's not a big deal but I find that feature useful sometimes, however if it's a hassle I can certainly live without it.
Thanks a lot, Tkkg!
hi, This icon from statusbar would be nice changed with AOSP style.
So recently did a clean install for V1.1.1 since I first did a dirty flash and I noticed my battery draining quicker then it did before. But even with the clean install it does the same.
In both causes AOD is on and I turn the phone screen downwards so it isn't always on and it seems that Android OS and Device idle are always staying awake. Where it went from using 3% battery at night (screen downwards) it went to 10% (screen downwards).
Currently I am on 62% over 15 hours of not using my phone and screen downwards. Where before I only reached that point when I would play PoGo a hour at the end of the day.
Anyone else having those issues?
tiesto14 said:
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
Click to expand...
Click to collapse
If you selected it in aroma and didn't install any other csc after the rom flash it is in advanced featurs
eranyanay said:
Hi,
Its my first root experience with the s8.
I love the rom.
However, I am unable to control the bixby button. I try to modify it behavior with bxActions or similar but nothing happens.
Is it depend on some of the Samsung apps? If so, which one (or is it possible to just have it working)
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
If you removed the bixby apks you can't control it anymore
Koehlix said:
Hi folks, i flashed Dolby atmos in aroma, but if i try to open the app, the process stop working. Viper works fine. Is there a fix?
Sent from my SM-G950F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I suggest you to post your issues at the dolby atmos thread, as I'm not the author of that mod
TarekElsakka said:
Hi there!
I am currently running BatMan-ROM V1.1.1 and kernel version (4.4.13), I'm not sure if that's your kernel or the stock one because I don't remember the aroma choice I made.
I have tried disabling and re-enabling all the advanced features but palm swipe to capture screen still won't work. Any idea as to why that is happening? It's not a big deal but I find that feature useful sometimes, however if it's a hassle I can certainly live without it.
Thanks a lot, Tkkg!
Click to expand...
Click to collapse
That kernel version you mention is the stock kernel.
That feature definitly works. Tested just now. But you really need to start at the edge of the screen. If you just swipe over it it won't do anything.
I had to start swiping at the very beginning of the edge screen
Borfas said:
hi, This icon from statusbar would be nice changed with AOSP style.
View attachment 4212340
Click to expand...
Click to collapse
I see, don't know if that's so easy doable
RDDraco said:
So recently did a clean install for V1.1.1 since I first did a dirty flash and I noticed my battery draining quicker then it did before. But even with the clean install it does the same.
In both causes AOD is on and I turn the phone screen downwards so it isn't always on and it seems that Android OS and Device idle are always staying awake. Where it went from using 3% battery at night (screen downwards) it went to 10% (screen downwards).
Currently I am on 62% over 15 hours of not using my phone and screen downwards. Where before I only reached that point when I would play PoGo a hour at the end of the day.
Anyone else having those issues?
Click to expand...
Click to collapse
If you just made a clean install, simply wait for a few days. Your phone is currently analyzing your usage and indexing the data and files you got on the sd and internal storage.
Also it you don't use the phone during the night, enable flight mode in order to get better battery (as it doesn't need to be connected all the time, maybe with bad receiption)
Sent from my BatMan powered SM-G955F
I suggest for clear sound and high volume: am3d (Download and install from magiks) and the original player in the app samsung store, now
enjoy with soundalive.... end edgelightning effect.
Installed it, everything is pretty much fine.
Only thing is V4A is not working i did a clean install, did the magisk update that works with it in the aroma installer, but when i turn it on nothing happens on my headset. Aswell on speaker.
Btw, the ''better camera quality'' mod is that zero's mod or should i still patch zeros mod on it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
# 1 - Introduction
# 2 - ROM features
# 3 - Kernel features
# 4 - ROM / Kernel links
# 5 - Sources and thanks
# 6 - FAQ and Telegram support
# 1 - Introduction
Hi! Welcome to Android Pie DeluxeROM® for exynos8895!
This ROM is compatible with N950F/FD/N, G955F/FD/N and G950F/FD/N.
At this point you should already know this, but just in case... Installing a custom ROM requires TWRP, and installing a modified binary such as TWRP, will increase our knox timer to 0x1, restricting us to use most of the knox features and without a way to reset it. With this custom ROM, we'll get most of the features back, keep reading
WARNING : WE DON'T TAKE RESPONSABILITES WITH WHAT HAPPENS ON YOUR DEVICE.
# 2 - ROM features
- Based on latest N950FXXSFDUG6
- Security patch 1 aug 2021
- AROMA installer to customize what we need
- Odex (Modded files has ben reodexed to get a better performance)
- Debloat
- Deknox
- Build.prop tweaks
- Secure folder patch
- RMM patched
- OEM toggle always enabled
- Decrypted CSCs and tweaked (Call recording, LTE only...)
- Safetynet/Netflix/S-Health fixes
- Official status on settings
- Signature checks disabled
- Native WebView without Chrome dependency
- Flash available till 1%
- Endless trials on theme store
- Modded TouchWiz with custom grid sizes (up to 8x8)
- Magisk root (optional)
- Chinese smartmanager (optional)
- AppLock (optional)
- Dual speaker (optional)
- ROM/Kernel/BLCP/DRC auto-updated
- Ton of mods under DRC (DeluxeROMControl) such as dual bar, remap for all keys, toggle styles, panel colors, advanced reboot menu, wifi/signal/alarm/sound styles, led settings, kernel settings... and much more
# 3 - Kernel features
- Based on latest N950FXXSDDTJ1 sources
- Compiled with stock google gcc 4.9
- Removed knox/tima/defex and all security restrictions
- Removed forced /data encryption and dm-verity
- Added props to help with S-Health, SmartView, Secure Folder, etc...
- Added all stock governors and schedulers
- Added WireGuard
- Added NTFS (R/W) support
- Added fake knox (0x0) and other small hacks
- Added DriveDroid support
- Added gestures (DT2W,S2W,S2S)
- Added led fading
- Removed forced selinux enforcing
- SELinux permissive by default (Switchable on DRC)
- CRC disabled by default (Switchable on DRC)
- Low memory killer profiles (Switchable on DRC)
- Patched sepolicy to avoid lags
# 4 - ROM / Kernel links
- First we need TWRP with working /data partition. If you don't know how to, please go to THIS thread.
- Download the ROM from here :
DRIVE - DRIVE2 - DRIVE3 - MEGA - MEGA2 - AFH
- Push to the phone
- Wipe system/data/cache/dalvik
- Install the ROM and after the auto-reboot wait about 10mins.
- Done
Kernel is built-in the ROM, but in case you need to reflash it, here are all the releases :
GITHUB KERNEL RELEASES
# 5 - Sources and thanks
DRC CODE SOURCE
KERNEL CODE SOURCE
List of developers/testers who contributed to this :
- @a.raul for all his extensive help on this project (mods, icons, fixs...)
- @DeluxeTeam®
- @ISS81
- @skywalkerr
- @jotajotavader
- @Jhonny_The_Raven
- @pablostriker19
- @Logel
- @ANDROIDXFOREVER
- @BudHorn
- @FD2R_K20A
- @msubhani
- @corsicanu
- @SuperRs
- @Grouxho
- @thereassadd
- @khongloi
- @yash92duster
- @daxgirl
- @topjohnwu
- @amarullz
That's all! Don't forget to press the thanks button
If you want to make a contribution, press Donate button or click HERE
Enjoy
FAQ
DO NOT REPORT BUGS OR TRY TO GET ASSISTANCE WHILE USING MODDED VERSIONS USUALLY MADE BY KANGERS LIKE @mpal AND OTHER 4PDA MEMBERS.
- What's dual statusbar (DSB) ?
+ The mod consists on duplicate the statusbar size and unlock more "positions" on "Statusbar views position" on DRC. This will give us more space to place our views like carrier, network speedmeter, batteries, icons, etc ...
- How can I activate dual statusbar ?
+ Once you flashed the ROM, you have a zip on the internal memory called DUAL_SB. This zip will detect which statusbar you have and change it. So it's valid too to revert dual to single.
- Why the statusbar custom background takes some time to be shown after a reboot ?
+ This happens only with images (not colors nor gradient), and it have a reason, when the device is booting, the UI can't access to your internal memory (for security reasons), so, when the mod tries to load the image, it fails. On the past this give us a headache with force-closes and not showing images. Now it simply will load it when the system sends the flag BOOT_COMPLETED. How much time it takes ? Not much really, from 10 seconds up to 1:30min.
- Where I can find backgrounds that fits with dual statusbar ?
+ We added a folder on your internal memory called DLX_BGS with more than 50 designs. If is not enough, you can always use any other image...
- Why I can't enter to the sub-screens on DRC ?
+ The statusbar views have a "master" preference called "Icons hidden", ALL the icons picked here won't be visible on the statusbar and the sub-screens will be disabled (why would we edit preferences without show the view ?). Don't forget to un-hide before edit them.
- DRC needs root and busybox to work ?
+ No. ONLY the kernel configurations needs root and busybox (both).
- I need mTweaks to configure DeluxeKernel ?
+ NO. You have a screen on DRC to configure it, so, don't use other apps while you're on this kernel.
- I switched to permissive but it doesn't change.
+ First of all check root and busybox, if they are ok wait few minutes. Sometimes magisk is slow to grant the root. This applies to all kernel configurations.
- I rebooted and I'm again on enforcing SELinux.
+ The boot is always with the default values, and as the statusbar, when the flag BOOT_COMPLETED is sent, kernel configurations are applied.
- If I flash another kernel, will DRC override kernel configurations ?
+ No, if is not the kernel provided, DRC won't show you the preferences related and won't apply them, so you can still using the app provided (usually) with the kernel.
- Double tap to wake doesn't works as expected with AOD.
+ Known issue, but no solution for now. (AOD have already a double tap to wake with the home button without press it, maybe is enough with it )
- What's the "Fingerprint wake-on" exactly ?
+ I made it thinking on the S7 where the user needs to press the button to wake-up the screen, but is good for us if we don't want to wast battery with the sensor. If it's disabled, fingerprint stills working, but won't wake up the device.
More questions when I get free...
Telegram support
English group HERE
Spanish group HERE
Reserved 2
Sounds nice! Will give it a try. I'd love RomControl Roms
Nice job!! Congrats master!!!
Feature Request in rc; 3minit clock
Bug; ram bar recents - height wrong?!
Bushido1992 said:
Feature Request in rc; 3minit clock
Bug; ram bar recents - height wrong?!
Click to expand...
Click to collapse
3minitclock? Did u see what u have in RC for clock? 3minit is not needed...
And what bug of ram bar? Any problem with that
thanks bro finally a serious rom for the note 8 a few things but done well congratulations
Sounds good. Trying asap. Thanks
AbrahamGC said:
3minitclock? Did u see what u have in RC for clock? 3minit is not needed...
And what bug of ram bar? Any problem with that
Click to expand...
Click to collapse
I like 3minit clock because there a tons of settings and customizations(also a little bit more than RC - i miss german date settings^^) . Yeah i look'd up to all RC settings.
To rambar - 4 me i think it's too far down (i only know it on top) . Look at my attachment
Good work so far. All runs fine at the moment
how can I decrease aod light?
Bushido1992 said:
I like 3minit clock because there a tons of settings and customizations(also a little bit more than RC - i miss german date settings^^) . Yeah i look'd up to all RC settings.
To rambar - 4 me i think it's too far down (i only know it on top) . Look at my attachment
Good work so far. All runs fine at the moment
Click to expand...
Click to collapse
If you want in German I can send you an strings.xml and you can translate it, then all mods will be in German too. Just PM me.
RAM bar you r right it's little down, I will fix it on next release, don't worry.
arshia.sunboy said:
how can I decrease aod light?
Click to expand...
Click to collapse
There isn't any mod added for that, mate
Thanks for your ROM and Rom control.
After installation on my S8-fd, I have to play with Magisk manager and enable permission, after that can start Rom control. Then, no root, and installed Magisk 16.4, enable System ui permision for Superuser. After that, reboot menu worked.
But, still can not enable OEM unlock. What to do?
Gear vr and Dex working? What about people with OEM issues?
miloshp said:
Thanks for your ROM and Rom control.
After installation on my S8-fd, I have to play with Magisk manager and enable permission, after that can start Rom control. Then, no root, and installed Magisk 16.4, enable System ui permision for Superuser. After that, reboot menu worked.
But, still can not enable OEM unlock. What to do?
Click to expand...
Click to collapse
The Magisk "fight" are explained on the FAQ, but well, u made it working.
OEM unlock, the ROM contains RMM patch so u shouldn't have that problem. All my testers never faced problems with that so.... i'm not sure what happened.
Motawa88 said:
Gear vr and Dex working? What about people with OEM issues?
Click to expand...
Click to collapse
Gear VR are tested, DEX I don't have, but I don't removed anything related, so it will work.
OEM as I said, have RMM patch so it shouldn't have any problem.
I can't find the link to download the Rom... ?
Or someone point it plz....
firasusman said:
I can't find the link to download the Rom...
Or someone point it plz....
Click to expand...
Click to collapse
Links are on installation steps buddy...
How to install :
1- Make a backup!
2- Wipe data/system/dalvik-cache/cache
3- Install the ROM. AFH - MEGA
4- Let it boot and enjoy
AbrahamGC said:
Links are on installation steps buddy...
How to install :
1- Make a backup!
2- Wipe data/system/dalvik-cache/cache
3- Install the ROM. AFH - MEGA
4- Let it boot and enjoy
Click to expand...
Click to collapse
Thanks bro... ?
Hello Deluxe Team
I have flashed this Rom right now to test it and what should i say? Wow. It feels really fast! I have seen the animations in developer options are set to 0.5 but also with default settings 1.0 it feels still really fast. Amazing.
Only 1question. You also have debloat the setup wizard (or something was going wrong on my end)? After first boot i can't set up my phone with wifi, Google account, Samsung account, Google assistant etc. to restore all my apps and settings. It's a bit awkward to restore all that stuff later manually.
Flashed on my note 8, clean installation with DBT CSC (Germany) and SuperSU.
Greetings Logel
Gesendet von meinem SM-N950F mit Tapatalk
Looks good, will it work on N950N? Thanks.
Sent from my SM-G965F using Tapatalk
PIXELIZED OS
Hey guys it's enzo2001 here, introducing you Pixelized OS. My aim on this ROM is to make the tab 4 smooth, up to date and with Pixel look and Android P which is latest android version. I make Pixelized OS for 3 devices which is SM-T231/T230/T230NU, the difference between SM-T231 and SM-T230/T230NU is the SM-T231 version include Dialer, Contacts and Messages for 3G users while the SM-T230/NU version i removed Dialer, Contacts and Messages for Wi-Fi users.
In this ROM i removed lot of Samsung and System bloatwares and added many mods and tweaks to boost the ROM performance to max and i replaced stock samsung app to Material Apps and Google Apps except Dialer (SM-T231) and Contacts (SM-T231)
For Pixel feel i added latest Google Product Sans fonts which is included in Pixel device, Pixel audio and Pixel bootanimation. I also add some Android P goodies and more to list here so try it yourself. Thank you guys for help me testing this rom, this ROM is now stable even though i don't have the device.
FEATURES
ROM INFORMATION
- Latest Firmware Build for all 3 models
- Latest Android Security Patch Level for all 3 models
- Android Version : 4.4.2 KitKat
- Stock Kernel
- Latest Busybox v1.28.4
- Rooted with Latest SuperSU v2.82
- Deodexed (Easier theming)
- Zipaligned
- Init.d Support
- SQLite3 Included
- Fixed Sd Card Permission
- Build.prop tweaks
- Init.d tweaks
- Up to date google apps using pico gapps (Light Gapps)
REMOVED
- Removed all Samsung Touchwiz Apps and and Features except Phone (SM-T231), Contacts (SM-T231), Settings and Framework
- Removed Samsung Gapps
- Removed many Google and Samsung bloatware
- Removed other unnecessary System Bloatware
INCLUDED APPS
- Stock Touchwiz Contacts (SM-T231)
- Stock Touchwiz Phone (SM-T231)
- Android Messages (SM-T231)
- Google Play Store
- Google Play Services
- Google Keyboard
- Google Calendar
- Google Camera
- Google Clock
- Material Style Gallery
- Material Style Calculator
- Material Style Music Player
- Material Style File Manager with built in plugins
- Android P Style Nova Launcher with Pixel Widget
- YoutubeVanced
- Xposed Installer
INTERFACE & UI
- Material Style Framework
- Nexus 7 UI
- Pixel Audio
- Pixel Bootanimation
- Android P Status Bar & Navigation Bar
- Android P Advanced Reboot Menu
- Google Product Sans Fonts
MODS
- Cloudflare DNS (Fast & Secure DNS)
- Changed Android Version to 9
- Anndroid P Easter Egg
- Android P Emoji
- Viper4Android Sound Mod
KNOWN ISSUES
None
REQUIREMENT
DEVICE
- Samsung Galaxy Tab 4 SM-T231/T230/T230NU
RECOMMENDED RECOVERY
- TWRP v3.0.0-0 TAR For Odin :
https://www.androidfilehost.com/?fid=1322778262903980465
- TWRP Odin Installation Method :
https://forum.xda-developers.com/tab-4/development/twrp-samsung-galaxy-tab-4sm-t230nu-t3761221
- TWRP update to v3.0.0-0 (Requires TWRP 2.8.4.0 or higher already installed)
Boot to TWRP > Install > Images.. > Select the downloaded .IMG
TWRP Update IMG :
https://www.androidfilehost.com/?fid=1322778262903980472
HOW TO INSTALL
DISCLAIMER - I'm not responsible if you brick your device, you choose to flash this so make sure to backup all of your files and the ROM before flashing this ROM in case something goes wrong. Also this ROM works only for the Samsung Galaxy Tab 4 SM-T231/T230/T230NU Do not attempt to flash this ROM on another device.
1) Boot to the TWRP recovery v3.0.0-0
2) Wipe Dalvik/ART Cache, System, Data, Cache & Preload
3) Flash the rom zip
4) Reboot the device
5) Done
DOWNLOADS
Clean Flash is recommended when installing a new update because i modify lot of system files
Latest Build
Pixelized OS v2.9 FIX(2018-08-16)
- Changed ROM name
- Change Android Version to 9
- Replaced TWRP v3.1.1-0 to TWRP v3.0.0-0
- Added Nexus 7 Style UI
- Added Android P Easter Egg
- Added Android P Status Bar and Navigation Bar
- Added Android P Advanced Reboot Menu
- Added Material Style Framework
- Replaced Google DNS to Cloudflare DNS
- Modified some init.d and build.prop tweaks
- Fixed Android P Notification Sound and Charging Sound
- Removed some unnecessary apps
- FIxed Volume
- Fixed both Flat Style Modules
- Removed browser fc ( install browser from play store)
SCREENSHOTS
Homescreen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
App Drawer
Android P Advanced Reboot Menu
Settings
XDA:DevDB Information
Pixelized OS, ROM for the Samsung Galaxy Tab 4
Contributors
enzo2001
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Samsung Galaxy Tab 4 SM-T231/T230/T230NU, TWRP
Based On: Samsung Touchwiz
Version Information
Status: Stable
Current Stable Version: 2.9
Stable Release Date: 2018-07-31
Current Beta Version: 2.5
Beta Release Date: 2018-07-06
Created 2018-07-06
Last Updated 2019-08-20
USEFUL INFORMATION ON FLASHING
Clean Flash:
1) Wipe Dalvik/ART Cache
2) System
3) Data
4) Cache & Preload
5) Flash ROM
Dirty Flash :
1) Wipe Dalvik/ART Cache
2) Cache & Preload
3) Flash ROM
TROUBLESHOOT PROBLEMS
Fix "Failed to mount/data" error in TWRP :
1) Backup all your files because this method will wipe all of your data
2) Go to TWRP
3) Go to Wipe box
4) Select Advanced Wipe
5) Check "DATA" and tap on "Repair or Change File System".
6) Tap Change File System
7) Change from EXT4 to FAT
8) Then change back from FAT to EXT4
9) Done.. now you can flash rom without any problems
PIXELIZED MODS
Welcome to Pixelized Mods section where you can make you device look more like Pixel and Android P
Download :
https://www.androidfilehost.com/?fid=1322778262903983683
Usage :
Extract the Pixelized Mods and follow all the steps below
Nova Launcher Setup (Android P Launcher) (Updated 2018-08-6)
The Nova Launcher Backup File will be updated regularly to keep up to date with the latest Android P Launcher, so please check this Nova Launcher Setup section to download the latest one.
1) After you install my rom the screen will appear "Welcome to Nova"
2) Simply click on "Select Backup"
3) Click on Browse..
4) Click on three dots on top right then click on settings
5) Tick both "Display Advanced Device" and "Display File Size"
6) Select the downloaded Nova Launcher Backup File
7) It will ask you to "Delete Current Layout ?" select "Yes"
8) Now on Nova Launcher homescreen tap on the widget on top of the screen
9) It will open the widget application.. on the "General Settings" there is a setting called "First Row Text Size" change it to "30sp"
10) If you want to enable the weather simply scroll down you will see "Weather Settings" then click on "Control The Weather" settings to enable the weather.. but if you dont use weather or dont want to consume much battery just leave it off
10) Now press back.. dont press home
11) Now for Android P Icon Pack just simply hold any app icon that u want to change tap edit > tap the icon > select gallery apps > select MiXplorer and locate ur downloaded Pixelized Mods
Xposed Installer Setup (Android P Style and features) :
Note : Some xposed module is hided from the app drawer but you can still find it in Xposed Installer > Modules.
1 - Activate all 8 modules, install/update xposed framework and reboot
2 - Neo Power Menu
1) Open New Power Menu
2) Go to Other > Tick Hide app in launcher > go to Backup and restore > Delete Settings > Tick All > Restart
3) Go back to Backup and restore > Restore settings > select the downloaded Pixelized Mods > Tick all and press ok > Restart
3 - Android Navbar Buttons
1) Open Android Navbar Buttons
2) WRITING..
CREDITS & HUGE THANKS TO...
Google - Android OS
Samsung - Samsung Galaxy Tab 4 7.0
ViPER520 & @zhuhang - Viper4Android : http://vipersaudio.com/blog
IRS Starter Pack : http://vipersaudio.com/blog/?page_id=115
Adrien Poupa - Vinyl Music Player
Xylthe - Calculator
Lukas Koller - Camera Roll Gallery
TeslaCoil Software - Nova Launcher
@Chainfire - SuperSU
@ASSAYYED - Assayyed Kitchen
@SharkcpN - Android P Fonts
@abhatia1435 - Android P Emoji
@Rishi2906 - Pixel Audio
@rtarv321 - Working Pixel Bootanimation and help testing the ROM
@Darkyy - Zipalign on boot init.d script
@MrT69 - Keweon Adblocker
@Team Vanced - YoutubeVanced
@HootanParsa - MiXplorer
@itandy - Android Navbar Buttons
@KuaQ - Monster UI
@dolorespark - Phab7
@ibocharov - Flat Style Bar Indicators & Flat Style Colored Bars
@DVaderFun - Eggster
@DrAcHe981 - Neo Power Menu
@rovo89 - Xposed Installer & Play Store Fixes
@SolarWarez - Fixed Xposed Installer
@Thedark night in the dark - TWRP Installation Guide
All xda members and many more for giving me ideas
Thank you for this release. I have it installed on a T230nu and so far my initial impressions are pretty good, it's weird about the resolution...I kind of don't like it but in a way I do.. The font is soooooo tiny, I mean very, Very!!! Tiny, this can kind of be changed with the app settings xposed module, but honestly I think the factory resolution fits better, I use gboard swipe typing and it is kind of hard to do at this resolution. On the t230nu their is also a no service notification that is constantly there. On the recents menu the task manager and close all, is kind of cluttered and you cannot see what they really say. The ROM runs great though and I love how bare bones it is, I'll definitely keep track of this thread, and once again thank you for the work on this.
Wikdclown said:
Thank you for this release. I have it installed on a T230nu and so far my initial impressions are pretty good, it's weird about the resolution...I kind of don't like it but in a way I do.. The font is soooooo tiny, I mean very, Very!!! Tiny, this can kind of be changed with the app settings xposed module, but honestly I think the factory resolution fits better, I use gboard swipe typing and it is kind of hard to do at this resolution. On the t230nu their is also a no service notification that is constantly there. On the recents menu the task manager and close all, is kind of cluttered and you cannot see what they really say. The ROM runs great though and I love how bare bones it is, I'll definitely keep track of this thread, and once again thank you for the work on this.
Click to expand...
Click to collapse
new link with fixed resolution : https://www.androidfilehost.com/?fid=5862345805528042631
Thanks for the update. For anyone wondering this ROM really runs great and it's a nice balance between performance/battery. A thing to note though, some apps that will install on normal smt230 ROMs will not install, for example, Instagram. A easy way around that is too install yalp store , so no big deal.
Wikdclown said:
Thanks for the update. For anyone wondering this ROM really runs great and it's a nice balance between performance/battery. A thing to note though, some apps that will install on normal smt230 ROMs will not install, for example, Instagram. A easy way around that is too install yalp store , so no big deal.
Click to expand...
Click to collapse
Thanks for the feedback.. do u have any screenshot of the installing apps problem.. i think i can fix it
It's not a error, when you go to play store to install it, it says device is not compatible,on other roms it installs fine. If that problem was fixed and if you could turn off the no service thing, and disable more of the cell phone stuff I'd say this would be top pick of roms for this device.
Did you clean install or dirty flash the new rom? I had it happen to me a while back (maybe 10-12 versions ago of this rom) play store would not allow me to install basic apps that I had just installed before the flash. I would follow the directions, wipe & reinstall the rom. By the way Enzo2001, the version numbers are all screwed up again, making it very hard for a person to 1)download an update, because they are the same name, 2)during install of rom in TWRP, it shows a different name compared to the filename, 3)settings/about has different name than install name. It going to get confusing for all, including you
Sent from my SM-G965U using XDA-Developers Legacy app
It was a clean flash, I never dirty flash a rom.
rtarv321 said:
Did you clean install or dirty flash the new rom? I had it happen to me a while back (maybe 10-12 versions ago of this rom) play store would not allow me to install basic apps that I had just installed before the flash. I would follow the directions, wipe & reinstall the rom. By the way Enzo2001, the version numbers are all screwed up again, making it very hard for a person to 1)download an update, because they are the same name, 2)during install of rom in TWRP, it shows a different name compared to the filename, 3)settings/about has different name than install name. It going to get confusing for all, including you
Sent from my SM-G965U using XDA-Developers Legacy app
Click to expand...
Click to collapse
1.0 is the latest one for now as this is the new xda thread.. for new update ill just make it to 1.1
Enzo2001, you didn't read my post. The title of your thread is "pixelized Rom v1.0. the 1st download link, the room is called pixel_light v1.0. then someone complains of the text being to small, you give a link to a new version called pixel_ light v1.0 which is the same as the 1st version. Then in twrp it says you are installing a different name Rom, and finally the settings/about. Please clean it up so people don't install the wrong one. For example, I used a file mgr, I looked at download time and date to know which to use, but in twrp/install, it doesn't show the date & time
rtarv321 said:
Enzo2001, you didn't read my post. The title of your thread is "pixelized Rom v1.0. the 1st download link, the room is called pixel_light v1.0. then someone complains of the text being to small, you give a link to a new version called pixel_ light v1.0 which is the same as the 1st version. Then in twrp it says you are installing a different name Rom, and finally the settings/about. Please clean it up so people don't install the wrong one. For example, I used a file mgr, I looked at download time and date to know which to use, but in twrp/install, it doesn't show the date & time
Click to expand...
Click to collapse
Okay for the next update i'll change to Pixelized ROM v1.1 on settings,thread and installation file.. sorry for confusing you, also on Pixelized ROM v1.0 can you help me search "Instagram" on play store and see if there is any message saying that is not compatible
Actually it will be very 1.3. You already have 2 downloads. 1) the original in the beginning of this thread. 2)the update to enlarge the screen font. Thanks, I'm only trying to help, I am not trying to be picky.
Sent from my SM-G965U using XDA-Developers Legacy app
rtarv321 said:
Actually it will be very 1.3. You already have 2 downloads. 1) the original in the beginning of this thread. 2)the update to enlarge the screen font. Thanks, I'm only trying to help, I am not trying to be picky.
Sent from my SM-G965U using XDA-Developers Legacy app
Click to expand...
Click to collapse
New Update !
Pixelized ROM v1.3 (2018-07-09)
- Restore default resolution
- Fixed Google Play Store not compatible
- Restore more system files to fix no service
https://www.androidfilehost.com/?fid=5862345805528044280
Installed latest update v.1.4. thank you for fixing version name & version #. Seems to be working good, Instagram installs from play store . TTS not working still. Screen seems to be more responsive. Thank you for update!
Ram usage is good!
rtarv321 said:
Ram usage is good!
Click to expand...
Click to collapse
Glad to hear that !
Haven't tried new build yet but was wondering is the standby cell process really draining that much battery?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FaceNotify by K4CZP3R
Hi, I'm really happy to show you my app.
This app will hide content of your notifications and show it only when it recognizes your face!
I really wanted this IOS-feature on my OnePlus, but could not find an app for this. So I wrote this app!
Installation guide on YouTube
It works with OnePlus 5/5T/6/6T/Xiaomi RN7/Samsung S8/S9/S9+/S10. Other phones are not tested, but it will probably work.
(OS Supported: OxygenOS, crDroid, OmniROM, MIUI)
Send me your logcat dump if you want to have your phone supported! (adb logcat -d > logcat.txt)
Create logcat dump after locking and unlocking your device using face unlock
Upload to gist.github or pastebin and send it to me via PM.
You can send my app log if you are having issues! (Enable it in settings, then send file named Documents/facenotify.txt)
OnePlus and their Oxygen OS Android modification is known as maximizing the stock Android experience. This may be true on the UX front but the exact opposite is valid for background process limits. ~https://dontkillmyapp.com/oneplus
So, try to follow this guide if the service gets killed!
If it still does not work, you can try to install facenotify as system app (will add magisk support for it in the next release!)
Code:
Changelog 2.0.5 (beta)
- Comply with Google Smartlock (FaceNotify will show notifications when Google Smartlock trust your location/bluetooth devices)
Changelog 1.5.6
- Added support for Galaxy S20 (and other new galaxy devices)
- Fixed App Logger crashing the whole app (Permissions error on android 10)
Changelog 1.5.3
- Fixed: scan function would not work because of path differences between phones
- Fixed: LG face recognition, thanks to @Saad Kothiwala
Changelog 1.5.2 (This version is only available through google play)
- Fixed: Notifications not showing after detection
- Added: [B]LG support[/B] (let me know if it works)
- Added: Reboot info at first startup
- Changed: removed hardcoded strings
- This is the last beta release (if everything goes well)
Changelog 1.5.0 (This version is only available through google play)
- Fixed: redirection to face unlock settings (All phones)
- Fixed: device not supported even when it is supported
- Changed: icons in settings
- Fixed: layout of startup check (Now it should work with smaller screen sizes)
Changelog 1.4.9 (This version is only available through google play)
- Changed: versionNameSuffix apperance (x.x.x.beta)
- Added: face unlock settings activity in manifest (this should fix fc on samsung phones)
- Changed: categorized settings
- Fixed: restoreAtInstall would not reset "firstRun" flag
- Deleted: old service functions
- Changed: comp check in settings
- Changed: Face detection scan should be a little bit more faster now
- Changed: logcat check, now system does the heavy part, not the app
- Fixed: Multiple services because startAtBoot service did not check if service is already on
- Fixed: crash on service stop
Fixed: Bug where service would crash because of wrong type of preference
Changelog 1.4.8 (This version is only available through google play)
- Added: Iris, Intelligent scan for samsung devices! (Thanks, @marcovittori and @Mr.Januzi)
- Changed: Backend server api
- Tried to fix: method tester in settings
Changelog 1.4.2 (This version is only available through google play)
- Added: Samsung Galaxy S8/S9/S10 support! (Thanks, @Mr.Januzi)
- Added: Samsung Galaxy S9+ to the supported devices list (SAMSUNG_SM-G965F)
- Fixed: FaceNotify would not work if specified language was set on phone
- Added: Changelog in the app
Changelog 1.4.0 (This version is only available through google play)
- Fixed: now service start itself at boot
- Fixed: Background service (check settings [ignore battery optimisation])
- Changed: Delay after face detection can by any value (in ms)
- Changed: First run screen (clear app data to see it)
Changelog 1.3.3 (This version is only available through google play)
- Fixed: Crash on start (it was due bad implementation of file reader)
- Moved: Log viewer to separate activity
- Changed: Logcat won't contain app facedetection messages (only app logs will do)
- Changed: Small cosmetic changes
Changelog 1.3.2
- Changed: Detection mode, software is prioritized over hardware
Changelog 1.3.1
- Added: support for MIUI (Tested on Xiaomi Redmi Note 7)
- Added: support for Xiaomi Redmi Note 7 on MIUI
- Changed: Yet another update on background process...
- Added: App log (enable it in settings to log app behaviour)
- Added: Simple "animations" [works with content hiding, not notification hiding]
- Changed: small cosmetic changes
- Changed: cleaned code a little bit
- Changed: "Your phone" name to a human-readable one
- Changed: names of detection modes to (OnePlus (Oxygen OS), AOSP (smartlock), Xiaomi (MIUI))
- Bug 1: In tester, miui option does have Samsung name (it's just a string mismatch) so if there's a true at samsung, choose miui.
Changelog 1.3.0
- Added: support for OmniROM (9.0)
- Added: Another method of background service (need to be tested)
- Added: Bugs to be fixed later
- Added: Will scan logs after the time of unlocking (won't scan old logs which could confuse notification show decision)
- Removed: Not working samsung unlock option
- Bug 1: Sometimes content will overlap
- Bug 2: You need to tap on a boot notification to start service
Changelog 1.2.7
- Added: Initial support for Samsung Galaxy S9 (probably broken)
- Added: Support for crDroid (on OnePlus 5T, there is a chance it will work on other custom roms)
- Added: Ability to choose 1 of 3 detection options (OOS, Custom ROM, Samsung) [Will add more in the future]
- Added: Test mode in settings, open it, lock your screen and unlock using your face. Then look if a value changes from false to true, if not your phone is not supported :( (send me your logcat)
- Changed: The way of detecting face back to 1.1 (Test)
Changelog 1.2.5 (hotfix)
- Added: Fix button in settings, if your face detection has no effect, please use this button.
Changelog 1.2.4
- Fixed: Restore to defaults had no effect
- Fixed: When hide notification, it would show notification with hidden content
- Fixed: Bug where multiple services will launch causing detection to break
- Fixed: Start on boot not executing
Changelog 1.2
- Added support for non-rooted phones (You will need a one-time adb connection to grant some permissions)
- Added support for OnePlus 5
- Rewrote some functions (preparing for open source release)
Changelog 1.1
- Lowered API, now Oreo devices can install this app
- Added support for OnePlus 5t
- Fixed bug when whole notification will show, but content will be still hidden
- Fixed shortcut to security settings
FaceNotify will need following permissions:
Code:
READ_LOGS - Check status of face recognition (adb shell pm grant k4czp3r.facenotify android.permission.READ_LOGS)
WRITE_SECURE_SETTINGS - Configure notifications settings (adb shell pm grant k4czp3r.facenotify android.permission.WRITE_SECURE_SETTINGS)
DUMP and PACKAGE_USAGE_STATS - Check background service status (adb shell pm grant k4czp3r.facenotify android.permission.DUMP) (adb shell pm grant k4czp3r.facenotify android.permission.PACKAGE_USAGE_STATS)
How to grant these permissions
Linux
1. Download platform-tools to be able to use ADB (google it)
2. Enable USB Debugging on your phone
3. Connect your phone to the computer
4. Enter adb devices
5. If your device is on the list, continue, otherwise repeat from step 2.
6. Grant needed permissions:
6a.
Code:
adb shell pm grant k4czp3r.facenotify android.permission.READ_LOGS
6b.
Code:
adb shell pm grant k4czp3r.facenotify android.permission.WRITE_SECURE_SETTINGS
6c.
Code:
adb shell pm grant k4czp3r.facenotify android.permission.DUMP
6d.
Code:
adb shell pm grant k4czp3r.facenotify android.permission.PACKAGE_USAGE_STATS
7. Permissions are granted and you can use FaceNotify now!
Windows
1. Download FaceNotify - Helper (look at downloads section)
2. Enable USB Debugging on your phone.
3. Connect your phone to the computer
4. Open FaceNotify Helper.exe
5. In the new opened window click Refresh
6. If your device is on the list, select it and continue, otherwise repeat from step 2.
7. Button Grant permissions should become active, click it
8. Accept confirmation message.
9. Permissions are granted and you can use FaceNotify now!
FAQ
Q: Nothing happens when my face is detected
A: Run Fix logs option in settings
Q: I've just installed FaceNotify and started service, it does not work
A: Reboot your phone.
Presentation by 4U Tech
Download from Play Store!
FaceNotify - PlayStore Download
Big thanks to:
@Mr.Januzi- for samsung galaxy s8/s9/s10 support
(and everyone who sent logcats to help me!)
Buy me a beer! paypal.me/KacperSerewis
Sources:
FaceNotify - Helper: https://github.com/K4CZP3R/FaceNotify_helper
XDA:DevDB Information
FaceNotify, Tool/Utility for the OnePlus 6
Contributors
kacperes00
Version Information
Status: Stable
Current Stable Version: 1.5.6
Stable Release Date: 2020-04-28
Current Beta Version: 2.0.5
Beta Release Date: 2020-05-04
Created 2019-04-03
Last Updated 2020-05-10
Great idea. Thanks for making this.
Just FYI for other: On the 6T, I only saw a blank page when I first opened the app. Waited a bit and I could see the buttons.
Sent from my ONEPLUS A6013 using Tapatalk
Wow it seems great
Tried your app and bit worked but when I set it back to default and my notifications still wasn't showing....
ddaharu said:
Tried your app and bit worked but when I set it back to default and my notifications still wasn't showing....
Click to expand...
Click to collapse
Settings - Security & lock screen - Lock screen preferences - On lock screen - Show all notification content.
SpY311 said:
Settings - Security & lock screen - Lock screen preferences - On lock screen - Show all notification content.
Click to expand...
Click to collapse
thanks mate. This is a great app. Thanks a lot for it. Maybe I can shoot you some ideas of my own. ?
ddaharu said:
thanks mate. This is a great app. Thanks a lot for it. Maybe I can shoot you some ideas of my own. ?
Click to expand...
Click to collapse
It's not my app. I just said how solve problem.
Thanks it's working fine !!
Anybody confirm if it works on 5t?
Is the download down? It doesn't work for me.
GeneFitz23 said:
Anybody confirm if it works on 5t?
Click to expand...
Click to collapse
Someone on the reddit post confirmed that it works. Although it will say "not supported" in the second box
Sent from my ONEPLUS A6003 using XDA Labs
---------- Post added at 06:01 AM ---------- Previous post was at 05:52 AM ----------
Oh damn never thought this would be possible. One caveat though. The transition from hidden to showing the notification content is not smooth. Actually there isn't even an animation. Could you do something with that or is it a limitation of Android?
Sent from my ONEPLUS A6003 using XDA Labs
Drunken1337 said:
Is the download down? It doesn't work for me.
Click to expand...
Click to collapse
It is working, you can try downloading from xda
Does not seem to be working for me on OnePlus 6.
First time I tap start service, it gives me an error my device is not supported. Second time it activates but does not hide any notifications on lock screen.
Nice work, thx
anirudhnyg said:
Does not seem to be working for me on OnePlus 6.
First time I tap start service, it gives me an error my device is not supported. Second time it activates but does not hide any notifications on lock screen.
Click to expand...
Click to collapse
Try to change some settings in app, it may be a bug. (will be fixed in the next release)
This is seriously very clever ! And it works perfectly, OOS 9.0.4. I set id the hide the whole notifications, it works wonders ! Love it !
It's a little inconsistent on OOS 9.0.3. The persistent notification is there, battery optimization is off for this app but somehow it still doesn't work after a period of time and I have to go into the app to disable and then re enable the service for it to work again.
Sent from my ONEPLUS A6003 using XDA Labs
Works great on my OnePlus 5T Beta 26(Pie).
Thanks!
Looks and works great! Thanks for this! I was trying on tasker a few days ago but it didn't work nearly as well. Are you planning on making this open source by chance?
JTruj1ll0923 said:
Looks and works great! Thanks for this! I was trying on tasker a few days ago but it didn't work nearly as well. Are you planning on making this open source by chance?
Click to expand...
Click to collapse
Sure thing! Once we get in stable version, I will release source for it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A project to create firmware for TV boxes and sticks with an Amlogic processor.
Amlogic S905X, S905X2, S905X3, S912, S922, S905W, S905W4, S905Y2, S905L (Android 9)
Amlogic S905X4, S905W2, S905Y4 (Android 11)
slimBOXtv ATV and AOSP are two custom firmwares suitable with some modifications for many android TV boxes.
Version 9.3 (Android 9)
• Amendments to the settings for choosing the type of recent
• Replaced ViPER4Android with a better version
• ViPER4Android built-in startup in settings
• New logo and bootanimation in the style of Google TV
• Updated built-in applications
• System amendments
Version 9.2
• Added to the settings Autostart application
• Power indicator goes off in sleep (Vontar X3 and similar)
• Minimum set of built-in programs (Copyright)
• Added new bootvideo, logo, bootanimation
• Updated built-in applications
• System amendments
Version 9.1
• Fixed pairing of Bluetooth devices
• Changed interface settings
• Fixed work Miracast
• Updated and activated ViPER4AndroidFX
• Added presets for ViPER4AndroidFX convolver
• Added selection of bootvideo, color settings icons, logo
• Disabled from updates in the market Atv Remote Service and Google splash screen
• Increased the number of notification icons in the status bar to 10
• Updated built-in applications
• System amendments
Version 42.5, 54.5 (Android 9)
• Replaced ViPER4Android with a better version
• ViPER4Android built-in startup in settings
Version 54.4
• Added UPlayer
• Vontar x3 dim power indicator during operation and during sleep
• Amendments to the display of processor temperature on the display
• New logo and bootanimation in the style of Google TV
• Updated built-in applications
Version 54.3
• Fixed problems with Chinese font
• Added to the settings Autostart applications
• Minimum set of built-in programs (Copyright)
Version 54.2
• Added new bootvideo, logo, bootanimation
• Updated built-in applications
• System amendments
Version 54.1
• Changed interface settings
• Updated and activated ViPER4AndroidFX
• Added presets for ViPER4AndroidFX convolver
• Added selection of bootvideo, color settings icons, logo
• Disabled from updates in the market Atv Remote Service and Google splash screen
• Increased the number of notification icons in the status bar to 10
• Updated built-in applications
• System amendments
Version 11.4 (Android 11)
• Corrections to the display of icons in the navigation bar (ATV)
• Amendments to the operation of the power button in the navigation bar
• Fixed display of thumbnails in recent
• Fixed setting wallpaper for TVLauncher (ATV)
• Fixed downloading applications from the market for ATV and AOSP
• New logo and bootanimation in the style of Google TV
• Updated built-in applications
Version 11.3
• Rollback Magisk to version 24.3
• Now root access works immediately after the first start of the system
• Added new bootvideo, logo, bootanimation
• Added to the settings Recognition of the command Ok, Google (Disable)
• Minimum set of built-in programs (Copyright)
• System amendments
Version 11.2
• Fixed work ViPER4AndroidFX
Version 11.1
• Changed interface settings
• Added presets for ViPER4AndroidFX convolver
• Added selection of bootvideo, color settings icons, logo
• Updated built-in applications
• System corrections
Version 114.3 for Ugoos X4, X4Q, AM7, TOX3 (Android 11)
• Dark theme for system app installer
• Additional shutdown timeouts in screensaver and power saving mode
• Added UPlayer
Version 114.2
• Fixed downloading applications from the market for ATV and AOSP
• Updated built-in applications
Version 114.1
• Added selection of Image Scale
• Added to the settings Autostart application
• Installer of APK files with displaying the number of the current and updated version of the application
• Added default launcher selection
• Added ViPER4AndroidFX and convolver presets
• Additional transition animation speeds
• Added selection of bootvideo, bootanimation, color settings icons, logo
• Disabled signature verification
• Disabled logging to dropbox
• Added selection of cursor, background in TVLauncher, font
• Disabled from updates in the market Atv Remote Service, Google Screensavers, TVLauncher
• Updated built-in applications
• System corrections
Supported TV boxes
s905x
s905x2
s905x3
s905x4
s912
s905w
s905w2
s905w4
s922
s905y2
S905L
Download
https://slimboxtv.ru
Help the project
Contacts
Telegram
Telegram Chat
YouTube
Great ROM, I flashed in my T95Q, everything work well
By the way, any plan for S922X Beelink Gt-King Pro?
Sent from my Mi A1 using Tapatalk
I have x96 air. I am enjoying 5.1 version but want to use 7.1. so please make wireless mouse usable. Especially to close the apps from recent tile. Thank you
packpunk said:
Great ROM, I flashed in my T95Q, everything work well
By the way, any plan for S922X Beelink Gt-King Pro?
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
will be soon
How can i install magisk on my x96 air? I am using 5.1 slimrom asop. Pls help.
SlimHouse, could you please make a rom for H96 pro with q6330 wifi support. Thank you
Wow, this is awesome, after longtime we have some development work back on track.
is this a 32bit or 64bit ROM?
My android box is Tanix tx92 which is also clone of Vorke z6 plus and Vontar Tx92, its LPRAM version so will this ROM work?
TX92 - S912 - 3/32GB - LPRAM-QCABT-QC9377
SlimHouse said:
• S912
TANIX TX9S
Click to expand...
Click to collapse
Any chance of supporting this TV Box please:
MECOOL M8S PRO L S912 3G 32G DDR3 LB
Thank you
Hannah
Playback issue
Hi, it’s nice to see you here at xda. I hope we don’t need to use google translator anymore ?
I am a happy user of slimhouse FW for a few months now. Lately I am suffering playback problems, no matter which player I use: Kodi internal, VLC Player, MxPro... all of them are freezing when I open an mp4, mkv,...
At first I thought it was related with the players, so I uninstalled and installed all of them, and the problem is still there... after checking some forums, I found some references pointing to an amlogic problem of some ROMs. I am not sure if you could suggest any solution.
I am currently running: slimbox-x3-asop-ver5.1 and the kernel version is 4.9.113
Is there any guide I can follow to upgrade to an updated version? I tried to find something on the 4pda forum where I got this fw, but it seems like you’ve move here.
The hw I am using is X96 Air P3 (v1)
Thanks in advance for your help!
Thank you for this ROM and for this thread. I managed to install it 2 weeks ago, thanks to google translator, but this thread is a must for support.
I have a x96 Air P4 4/32, and this ROM made the experience of using it much more pleasant, as well as user-friendly. Using AOSP version with a 3rd-party launcher.
The first problem I faced up until now was that some app menus had the same font color as the background, but that was 'solved' by disabling System bars' Autohide function. (Slimbox settings>System bars>untick Autohide.)
Also was having some issues with the clipboard pop-up, but installed g-board and it now shows everywhere.
Still can't run TVZion or Popcorn Time, but have no idea why.
thyaguster said:
Thank you for this ROM and for this thread. I managed to install it 2 weeks ago, thanks to google translator, but this thread is a must for support.
I have a x96 Air P4 4/32, and this ROM made the experience of using it much more pleasant, as well as user-friendly. Using AOSP version with a 3rd-party launcher.
The first problem I faced up until now was that some app menus had the same font color as the background, but that was 'solved' by disabling System bars' Autohide function. (Slimbox settings>System bars>untick Autohide.)
Also was having some issues with the clipboard pop-up, but installed g-board and it now shows everywhere.
Still can't run TVZion or Popcorn Time, but have no idea why.
Click to expand...
Click to collapse
I am using ATV
Now, what patch do I need to use to migrate to AOSP?
Thanks!
Asop patch
VN Dev said:
I am using ATV
Now, what patch do I need to use to migrate to AOSP?
Thanks!
Click to expand...
Click to collapse
Yeah, just like ramz said above, use Patch-SLIMBOX-AOSP
May I ask wether X96 Max plus is for 2GB unit?...too stupid, there is 2g version
Anyone flashed an image onto HK1 Play S905x2 4GB unit?
Are all images for S905x3 only? Because 1st post says S905x2 too?!
tuto here https://forum.freaktab.com/forum/tv...-android-9-0-media-player?p=812451#post812451
Code:
Tutorial Flash Rom X96AIR
*
by ATVx96Air
Preambule
What are your Hardware version ?
X96 air P1, P2/V2, P3, P4 PCB version? 2Go/16Go or 4Go/64Go ?
*
Very important stop if you don't know your version
What kind of rom type you need?
- Stock (build in rom) - Android (phone) AOSP - Android TV -Stock Custom etc
Any roms for X96air P3 version here
So you need:
- 1 X96AIR box
- 1 SD card
- Amlogic Burn Card Maker v2.0.2
Pre-installation
1- Prepare SD Card
On Pc
Open Aml Burn Card Maker , select SD card letter ex: P: , select rom file ex: and check "to partition and format" button
Now click on "make"
Format sdcard and copy file begin.... let software do it
SD card is ready now !!
Flash New rom on the box method SD card
First Now Power off and unplug AC power box /!\ !!!
1- Flash box with new rom
Put Sd card in the box , put a toothpick in av/out and plug AC power cable
the droid logo appear unplug toothpick and progress bar for update launch...
*
Flash is begin wait wait wait dont panic!!!
After flash the box booting on the new rom you choose ...
Now you can drink a Coffee and read the Part 2
2-Install Tools
to continue you can install
- Aptoide TV to have a alternative store link here
- SAI Splitt Apk Installer to install bundle apk (ex: Disney+) link here
3-install APK'S apps for your favorite apps
Folder apk apps here
- Netflix (Dont do update after install)
- Molotov TV (install version 1.5 to force ATV) aide install 3.43
- Disney + (use SAI app to install bundle)
- Amazon Prime video
Nota:
[QUOTE=billouetaudrey;n812476]Install with success with SD Maker ( thanks to ATVx96air )
Now, just two " bug "
Disney+ don't have sound ( HDMI ) ( sound ok with molotov tv for example )
Netflix not working ( maybe you have apk ? ) ???[/QUOTE]
Solution:
For slimbox 7 x96air rom
Disney+ bug is on lot of box because no stereo flux in HD , put disney+ seeting in Economise Data Disney+ 1.6.2 apk bundle (install with SAI)
Netflix not allowed apps on device without DRM L1 so put a working version here Netflix (no atv) usable with remote
4 -French ISP TV apps
if you are in france , any apps for TV here
French ISP: Free, Red by SFR ,Bouygues etc....
*
Atvx96air French Guy I am
I come back quickly with the tuto
Great forum thanks all
Download slimbox v7 here : https://mega.nz/folder/EKpxURCA#S2PgP0RmGGG0tlpB8owDkA/folder/Yepn3aib
Download SlinBox v8 here : https://mega.nz/folder/VfwVVRjI#8NcwpJ_Fheqp-z7slEymWA/folder/4WwlUbCY
to update V7 to V8 to sd card after make sdcard with v8 rom
Code:
[common]
erase_bootloader =0
erase_flash =0
reboot =1
in aml_sdc_burn.ini
Edit 22/01/2021
NEW LINKS 2021
New download page here: Slimboxtv.ru
For P3 version here : https://yadi.sk/d/qK-h74ni8rh7lA?w=1
All apk for French Country here: All apk for France ISP
Hi.
Beelink GT1 Ultimate (Amlogic S912).
It's compatible?
Thank you.
Good morning, I'm crazy looking for how to install this rom since yesterday. I am trying to record it with "Burn card maker 2.0.2" but I did not create the file "aml_sdc_burn.ini" and that I think is the problem. What am I doing wrong? Thank you
fran_34 said:
Good morning, I'm crazy looking for how to install this rom since yesterday. I am trying to record it with "Burn card maker 2.0.2" but I did not create the file "aml_sdc_burn.ini" and that I think is the problem. What am I doing wrong? Thank you
Click to expand...
Click to collapse
Try with a different card.
I have tried with various types of cards and usb and these files are what it creates.
SLIMBOX ver 8
• Updated google services and apk
ВЂ Returned the choice in the settings of a dark or white theme
• Returned additional image settings
• Updated firmware
• In AOSP, I returned the recent stocks and closed the menu button
• Added debug settings
• Added additional power settings
• Various system corrections