Hi
This Guide IS ONLY FOR SM-A260G
Some of A2 devices have problem patching cert
signal just work for 1 minute then no service and NG Status or even be stable phone storage goes from 16gb to 8gb
we going to fix it.
Requirements:
***I have used Chimeratool***
1.Read Carefully
2.Download This 4file firmware A260GDDS7ATH1
3.MagiskRoot APK
------
-Factory reset Before flashing
-Flash the firmware
-Enable OEM Unlock Option in usb debugging
-Install Magisk Root APK file
-Copy AP Section of firmware in Storage
-Patch it by Magisk App
-Copy Patched Ap file in pc and flash it By odin(After flash it my take a while to load system) dont worry
-open magisk app and let pop-up dialog do the additional setup then phone reboots and you are ROOTED
-Repair IMEI by Chimera
-Patch cert by Chimera (2020 September) Version of patch cert
*****After Patch your Storage Capacity Should Change as 16gb to 8gb no worry****
-Just reboot download mode
-put CSC section of firmware in odin and uncheck repartition and flash it
Done You repaired and patched Imei and Signal is Stable.
Storage is Safe.
Related
Please be advised anything you follow from this thread i am not held responsible if you mess your phone up, but if you follow the instructions carefully you have less chance for error! This WILL trigger KNOX and you will lose SECURE FOLDER! some custom roms have a secure folder built in.
Im making this due to many people struggling to root, change country specific code and to help understand the custom rom procedure.
if any information here is missed out or mistyped please let me know.
Credit is due to Chainfire AND Tkkg1994, so Thanks both of you.
All files linked are for N930F/FD varient
ROOT AND TWRP RECOVERY
1. First you will need to download Twrp https://dl.twrp.me/gracelte/twrp-3.0.2-1-gracelte.img.tar.html
2. download the newest SU binary https://download.chainfire.eu/1003/SuperSU/SR1-SuperSU-v2.78-SR1-20160915123031.zip?retrieve_file=1 and save to your SD CARD ROOT directory
3.Reboot into download mode holding Volume Down + Home + Power button and click volume up to select continue.
4.open odin check auto reboot and f.reset time is enabled
5. click AP and select TWRP file you downloaded and click start
6. reboot into recovery and swipe to allow modifications
7. Go to Install and find where you saved SU binary (SD CARD ROOT directory) and click install
8. You are now rooted
CUSTOM ROM INSTALL
By now you should know which Rom you wish to install and should have it download.
1. Put the rom.zip onto you SD CARD ROOT directory.
2. Reboot into TWRP recovery ( VOLUME UP + HOME + POWER BUTTON) and allow modifications.
3. Click install and find the custom rom you downloaded to the SD CARD ROOT directory and click it to install.
4.Follow the instructions included in the rom and choose the options you wish to install (some roms give you the option to install the old 100% battery kernel, i reccommend you dont install this kernel for obvious reasons) you should also do a CLEAN install (factory reset/format data)
5. you should now be installed and able to reboot into custom rom.
CSC Change
CSC changing allows you to change your country code from o2 to ee for example to allow wifi calling etc.
1. BACKUP your EFS Partition. (incase any error occur)
2. Download the exynos CSC.zip from Tkkg1994 Post http://forum.xda-developers.com/note-7/development/utility-flashable-csc-selection-v1-0-t3450911
3. Save the zip file to your SDCARD ROOT directory
4. Reboot into TWRP Recovery and allow modifications
5. Click install and find the CSC.zip you saved to your SD CARD ROOT directory and click it to start installation.
6. Follow instructions until you get to the mulitple choice list of CSC. BTU is the UK unbranded csc which also has the built in wifi calling option for example EE network. (recommend) choose which csc you want and click to install
7. once done go back and reboot the system you are now done
If you followed the full guide you should now be rooted with custom recovery and have your CSC changed
If you require to revert back to stock for any reason open samsung smart switch, click more and then the second tab, next enter your model number and seriel number and click okay
You forgot to mention that by doing this you trigger knox and lose secure folder
LightningJay said:
You forgot to mention that by doing this you trigger knox and lose secure folder
Click to expand...
Click to collapse
good point thankyou sir!
hello everyone ..... i will share the root trick without ubl (unlock bootloader)
this method only applies to root magisk only.
this trick I have tested with mobile phone huawei y5 2017 with android version 6.0
and xiaomi redmi note 3 mtk ..
what you prepare as follows:
1.Firmware same with your phone type (my recommendation is flash FW on your phone)
2.Boot.img from the appropriate firmware of your phone type
3.magisk manager
execution steps:
1. make sure the phone is connected internet
2. open the phone settings to activate usb debugging and install the source check from the outside in the security settings.
3. copy boot.img into sdcard on phone
4. install magisk manager application and open the application,
go to the settings on the top left and search "booted boot output format and you can choose according to your needs (if select img.tar, this works with Odin samsung). make your choice (if img = flash with fastboot or spflashtool, ufibox.
go back and select pairs and you will see 3 options "download zip, patch boot img file, install "
please select "patch img boot file" select file and search boot.img stored in sdcard and ok ... magisk manager will download automatically ... just wait until there is installation process is complete.
after finished you see its results in the internal memory in the folder "magisk manager"
there is a file named "patched_boot.img" that means success
copy patched_boot.img to laptop / pc and rename it to "boot.img" and flash it with the appropriate tool of your phone.
if boot.tar in flash with odin
if boot.img flash with spflashtool (if your chipset is mtk)
just install patched_boot.img your phone is rooted
thanks to @topjohnwu
I am sorry, my English is not good
*remember that all the risks in modification are at risk and I am not responsible for all your failures .....
thanks for visiting and hopefully to suc ...
Does this work with Sony Xperia X Performance (Android oreo) that has ubl no?
-Download the latest stock firmware for your Samsung Galaxy A70s with Samfirm app or Samfrew/Sammobile
Your KNOX status will be tripped if you're following this tutorial...
https://samfirmtool.com/samfirm-v0-4-1
https://samfrew.com/model/SM-A707F/
https://samfrew.com/model/SM-A7070/
You may need : https://samsungodin.com/download/Odin3_v3.13.1.zip
-Extract the SM-A707XX_1_EXAMPLE_0000000_fac.zip.enc4 file with 7zip or any other unzipper.
-Copy the (AP_A707XXXU1ASIX_EXAMPLE_0000000_user_low_ship_MULTI_CERT_meta_OS9.tar). AP .tar file and transfer it to your internal storage.
-Download and install Magisk Manager APK https://github.com/topjohnwu/Magisk/releases/download/manager-v7.3.5/MagiskManager-v7.3.5.apk.
-Open Magisk Manager and go to Install > Install > Select and Patch a file.
-Navigate through the storage and select the extracted AP file.
The firmware will be patched and will be found in Internal Storage/Download/magisk_patched.tar.
-Transfer the patched file to your PC.
-Turn OFF your device and boot into DOWNLOAD MODE.
-In Odin, click on AP and select the patched .tar file, Uncheck “Auto Reboot” and click on Install.
The tool will flash Magisk V20 on your Samsung Galaxy A70s.
To boot in recovery or boot the system with Magisk installed:
1. Powering up normally → System with no Magisk
2. Power + Volume Up → Bootloader warning → Release all buttons →System with Magisk
3. Power + Volume Up → Bootloader warning → Keep holding volume up → Actual recovery
Hi bro how can v convey A705w single sim to dual Sim?
Android 10 is released.
Hi everyone! I have uploaded an updated modem twrp backup for Andromeda. With this file your 5G connection timeout issues will be gone.
Requirements
- TWRP
- Mostly any custom rom, maybe even MIUI 10.
Tested ROMs
Pixel Experience Plus 10 - 13/04/2020
EvolutionX
Usage
- Reboot to TWRP
- Select Backup>modem (just for safety in case something goes wrong or your rom is not yet supported)
- Select Backup>boot (this way you will have a dummy backup folder).
- Reboot
- Download modem.emmc.win, place it in TWRP/Backups/your_most_recent_backup in phone's sdcard root path. An example of a backup folder name is 2020-03-30--18-33-09
- Reboot to TWRP
- Select Restore, locate your modem.emmc.win file's root folder (the one that you placed in the backup folder with boot partition), and check "Modem"
- Reboot
Download
https://drive.google.com/open?id=1zgKV9FmUMrGsrOLLLUNpGrlU0FUB15cp
I have acquired this file with the help of @Quantumkk123.
draand28 said:
Hi everyone! I have uploaded an updated modem twrp backup for Andromeda. With this file your 5G connection timeout issues will be gone.
Requirements
- TWRP
- Mostly any custom rom, maybe even MIUI 10.
Tested ROMs
Pixel Experience Plus 10 - 13/04/2020
EvolutionX
Usage
- Reboot to TWRP
- Select Backup>modem (just for safety in case something goes wrong or your rom is not yet supported)
- Select Backup>boot (this way you will have a dummy backup folder).
- Reboot
- Download modem.emmc.win, place it in TWRP/Backups/your_most_recent_backup in phone's sdcard root path. An example of a backup folder name is 2020-03-30--18-33-09
- Reboot to TWRP
- Select Restore, locate your modem.emmc.win file's root folder (the one that you placed in the backup folder with boot partition), and check "Modem"
- Reboot
Download
https://drive.google.com/open?id=1zgKV9FmUMrGsrOLLLUNpGrlU0FUB15cp
I have acquired this file with the help of @Quantumkk123.
Click to expand...
Click to collapse
Link is dead. Please reupload
Link isnt working, can some one reupload modem with working without any problems with hotspot?... Latest 12.0.0.7 has a problem
IMPORTANT
Rooting can break your phone. Do this at your own risk.
Intro
This guide explains how you can root any Sony Android phone without installing a custom recovery like TWRP. It's possible by downloading the latest firmware, patching the boot IMG file with Magisk and flashing the patched boot IMG.
Note 1:
If you have the XQ-AU52_EU_59.2.A.0.463-R14C firmware installed (Sony Xperia 10 II EU Android 12), you can skip downloading the firmware and converting the file from SIN to IMG. Flash the patched "boot.img" file in the attachment instead.
Note 2:
If you don't like the skin that's installed along Android 12 on the Sony Xperia 10 II, you can downgrade the firmware by using Sony Xperia Flash Tool - Emma.
Note 3:
All files I collected are available
How to
Install all Android updates on your phone
Back-up your phone with a tool or Google back-up
Unlock the bootloader (wipes all data on your phone)
Sony users:
https://developer.sony.com/develop/...d/unlock-bootloader/how-to-unlock-bootloader/
Download the latest firmware
Sony users can use XperiFirm which you will find in the attachment
Make sure the version you download matches the one on your phone!
Convert the “boot SIN” file you just downloaded to IMG:
Drag the “boot SIN” file to “unsin.exe” and an IMG file will be created
(you will find "unsin.exe" in the attachment)
Copy the IMG file to your phone
Copy Magisk APK to your phone
(you will find Magisk in the attachment)
Install Magisk on your phone using the APK you copied
Open Magisk on your phone
Install Magisk (button in the app) and patch the “boot IMG” file you just copied
Get the files for ADB (platform-tools)
(you will find the files in the attachment)
Copy the patched “boot IMG” file to the “adb” folder on your pc and rename it to “boot.img”
Enable USB debugging on the phone:
a) Settings » About » Tap “Build” until you a message appears you are a developer
b) Settings » Advanced » Developer » USB debugging
Open a CMD window in the “adb” folder
a) Press the “Windows botton”
b) Type "cmd"
c) Click "Command Prompt"
d) Type "cd /d <path to directory with adb.exe file – i.e. c:\myfolder\adb>"
Start the phone in “fastboot” mode:
a) Turn the phone off
b) Press the "volume-up" button and connect the USB cable at the same time
Install the USB drivers
(you will find the files in the attachment)
Run "fastboot flash boot boot.img" (watch the file name)
Disconnect the cable and turn the phone on
Download "Root Checker" from the Play Store and open it
Tap "Check Root"
A popup will appear to grand root access to the Root Checker app
If a message stating "ROOTED" appears your phone is succesfully rooted
That's it!