Anyone have a good download link for the root file? In the development section, the links to download the root file in multiple threads does not work anymore. I even searched google and it keeps giving me the same links.
brian85 said:
Anyone have a good download link for the root file? In the development section, the links to download the root file in multiple threads does not work anymore. I even searched google and it keeps giving me the same links.
Click to expand...
Click to collapse
All you should have to do is download this file and follow the instructions from this forum...download link works, I just tested it myself.
http://forum.xda-developers.com/showthread.php?t=2000896
Link: http://androidsu.com/superuser/
- Download Superuser-3.1.3-arm-signed.zip on your phone
- Boot into recovery
- Install the zip
- Reboot
- Profit!
I see a lot of people are looking for a decent ROM for the Elephone P6i. This is the firmware that came with my device, plus a few slight modifications. The recovery included is the PhilZ touch Recovery CWM 6.0.5.1, and the SU binary is already installed, as well as busybox and SuperSU as a system app. I also installed fully customizable audio modifications, including XTREMEMusic, assembled by @androidexpert35 at xda, and Sony Atmos, which are both available for download here:
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
I am also posting links to both the CWM-flashable zip and the CWM backup. You pretty much have to have a custom recovery already installed to flash this zip, unless you want to go through the trouble of extracting it, then converting it to SP Flash Tool files. I might upload the files for direct flashing myself depending on the amount of requests.
Update: SP Flash Tool files have been uploaded.
Files to download
------------------------------------------------------------------------------------------------------------
CWM Files:
CWM Flashable Nandroid ROM zip (Install downloaded zip file from custom recovery):
Link 1: https://www.dropbox.com/s/7eb8pvy4s0lhqus/Modified-Factory-Flashable.zip?dl=0
Link 2: https://mega.co.nz/#!oFd2RLoI!-CVCMlYdKnQyEoFw2277SY960f2ONaTjAe1dPEq3Pyg
CWM Nandroid Backup zip (Install by extracting the zip file to the clockworkmod\backup\ folder and choosing to restore from backup in CWM custom recovery):
Link 1: https://www.dropbox.com/s/ol7iru7hmjeq27q/Modified-Factory-Backup.zip?dl=0
Link 2: https://mega.co.nz/#!9IlBTRiJ!25hIaMjeP-mBscdeORF4tBx7h2g_fUbP6beAphEQF-U
------------------------------------------------------------------------------------------------------------
SP Flash Tool Files:
MTK Droid Tools Backup:
Link 1: https://www.dropbox.com/s/9mpqdmkmjiubdgs/Modified-Factory-FlashTool.zip?dl=0
Link 2: https://mega.nz/#!EUtgCSYR!NaQIrDNJBIN5zvEvfeU95Roc7YaPTamstDbKPKxfpF8
UserData and Cache (Required for the Format All + Download option)
Link 1: https://www.dropbox.com/s/8lpl1cfesgmoi9x/userdata+cache.zip?dl=0
Link 2: https://mega.nz/#!0FklTQpD!eLGXQDIhBfyKMfm5FOLrThJ0ah7VqKoeuOYue2pBBDA
Also, for those who are unaware, after a complete format and flash, you may need to change your IMEI numbers back to their original values. If you require assistance in doing this, let me know.
Let me know how it works for you!
TechManPro said:
I see a lot of people are looking for a decent ROM for the Elephone P6i. This is the firmware that came with my device, plus a few slight modifications. The recovery included is the PhilZ touch Recovery CWM 6.0.5.1, and the SU binary is already installed, as well as busybox and SuperSU as a system app. I also installed fully customizable audio modifications, including XTREMEMusic, assembled by @androidexpert35 at xda, and Sony Atmos, which are both available for download here:
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
I am also posting links to both the CWM-flashable zip and the CWM backup. You pretty much have to have a custom recovery already installed to flash this zip, unless you want to go through the trouble of extracting it, then converting it to SP Flash Tool files. I might upload the files for direct flashing myself depending on the amount of requests.
Update: SP Flash Tool files have been uploaded.
Files to download
------------------------------------------------------------------------------------------------------------
CWM Files:
CWM Flashable Nandroid ROM zip (Install downloaded zip file from custom recovery):
Link 1: https://www.dropbox.com/s/7eb8pvy4s0lhqus/Modified-Factory-Flashable.zip?dl=0
Link 2: https://mega.co.nz/#!oFd2RLoI!-CVCMlYdKnQyEoFw2277SY960f2ONaTjAe1dPEq3Pyg
CWM Nandroid Backup zip (Install by extracting the zip file to the clockworkmod\backup\ folder and choosing to restore from backup in CWM custom recovery):
Link 1: https://www.dropbox.com/s/ol7iru7hmjeq27q/Modified-Factory-Backup.zip?dl=0
Link 2: https://mega.co.nz/#!9IlBTRiJ!25hIaMjeP-mBscdeORF4tBx7h2g_fUbP6beAphEQF-U
------------------------------------------------------------------------------------------------------------
SP Flash Tool Files:
MTK Droid Tools Backup:
Link 1: https://www.dropbox.com/s/9mpqdmkmjiubdgs/Modified-Factory-FlashTool.zip?dl=0
Link 2: https://mega.nz/#!EUtgCSYR!NaQIrDNJBIN5zvEvfeU95Roc7YaPTamstDbKPKxfpF8
UserData and Cache (Required for the Format All + Download option)
Link 1: https://www.dropbox.com/s/8lpl1cfesgmoi9x/userdata+cache.zip?dl=0
Link 2: https://mega.nz/#!0FklTQpD!eLGXQDIhBfyKMfm5FOLrThJ0ah7VqKoeuOYue2pBBDA
Also, for those who are unaware, after a complete format and flash, you may need to change your IMEI numbers back to their original values. If you require assistance in doing this, let me know.
Let me know how it works for you!
Click to expand...
Click to collapse
Sorry but it's not the correct forum to post this
Apologies. Would you be able to direct me to the correct forum?
TechManPro said:
Apologies. Would you be able to direct me to the correct forum?
Click to expand...
Click to collapse
You gotta move this to android general forum, ask the moderators to do so
Enable ARcore and other funky AR apps on stock rom
This little zip enables ARcore for the Asus Max Pro M1 stock rom
Tried and tested successfully on the ZB601KL variant (4/64)
Not tested on custom rom - will probably not work.
What works:
1. Latest ARCore
2. Measure App
3. IKEA app
4. Line draw app
5. AR Stickers modded (see below)
This is based on these two:
https://forum.xda-developers.com/showpost.php?p=76920297&postcount=5176
https://forum.xda-developers.com/showpost.php?p=76580197&postcount=1
Hence thanks to these two gentlemen and full credits to them:
@Arnova8G2
@Stampyron
Steps (reproducing from @Stampyron thread with some modifications) :
Step 1. Download and install ARCore apk from here https://www.apkmirror.com/apk/google-inc/arcore/arcore-1-3-18060406-release/
Step 2. Install an app that use ARCore. If you're lazy, you can use this apk https://www.apkmirror.com/apk/googl...-anywhere-with-ar-2-0-0-android-apk-download/
Step 3. Open the app you installed in step 2 and let it crash. This will make the folders and files that we're going to use later on.
Step 4. Download the file named arcore_x00t.zip
Step 5. Reboot to twrp and and flash the zip file
Step 6. Reboot to system. Now you can use any apps that require ARCore!
NOTE: If you updated ARCore repeat step 3 onwards
ARStickers Updated to ver 1.2.180326103.apk - 4 July 2018
ARStickers doesnt work with the apk from apkmirror.com. Use this modded one instead
https://drive.google.com/open?id=1DqnA2lFV5QYq7vQDah2IMLlAO285nKzK
(thanks to @Arnova8G2)
Explanation
@Arnova8G2 twrp zip is based on placing a file in the /data partition and renaming it as per the ro.build.product value.
However for stock ROM, the true value that works for this device is what is returned by ro.product.device instead in the system (different from the one in twrp), hence the modification is needed
The value in the fully booted stock rom is "ASUS_X00T_2"
And the second modification needed is to make the file name include "8.1" for latest oreo for this device.
Hence the file name now that works for this device in stock ROM is: "device_profile_ASUS_X00T_2_colon_8.1.textproto"
Enjoy!
candiesdoodle said:
Enable ARcore and other funky AR apps
This little zip enables ARcore for the Asus Max Pro M1
Tried and tested successfully on the ZB601KL variant (4/64)
What works:
1. Latest ARCore
2. Measure App
3. IKEA app
4. Line draw app
5. AR Stickers modded (see below)
This is based on these two:
https://forum.xda-developers.com/showpost.php?p=76920297&postcount=5176
https://forum.xda-developers.com/showpost.php?p=76580197&postcount=1
Hence thanks to these two gentlemen and full credits to them:
@Arnova8G2
@Stampyron
Steps (reproducing from @Stampyron thread with some modifications) :
Step 1. Download and install ARCore apk from here https://www.apkmirror.com/apk/google...-apk-download/
Step 2. Install an app that use ARCore. If you're lazy, you can use this apk https://www.apkmirror.com/apk/google...where-with-ar/
Step 3. Open the app you installed in step 2 and let it crash. This will make the folders and files that we're going to use later on.
Step 4. Download the file named arcore_x00t.zip
Step 5. Reboot to twrp and and flash the zip file
Step 6. Reboot to system. Now you can use any apps that require ARCore!
NOTE: If you updated ARCore repeat step 3 onwards
ARStickers
ARStickers doesnt work with the apk from apkmirror.com. Use this modded one instead
https://drive.google.com/open?id=17r5Hg-WyRTRVAkqx40vmSHyrDMAxmKQG
(thanks to @Arnova8G2)
Explanation
@Arnova8G2 twrp zip is based on placing a file in the /data partition and renaming it as per the ro.build.product value.
However the true value that works for this device is what is returned by ro.product.device instead in the system (different from the one in twrp), hence the modification is needed
The value in the fully booted rom is "ASUS_X00T_2"
And the second modification needed is to make the file name include "8.1" for latest oreo for this device.
Hence the file name now that works for this device is: "device_profile_ASUS_X00T_2_colon_8.1.textproto"
Enjoy!
Click to expand...
Click to collapse
Thanks for the work.Can u suggest me some good ar apps as ur links are not working
Bhuvi100 said:
Thanks for the work.Can u suggest me some good ar apps as ur links are not working
Click to expand...
Click to collapse
Links updated. Please try now
I am waiting for magisk module. I don't want to temper system
Aftab_khatri said:
I am waiting for magisk module. I don't want to temper system
Click to expand...
Click to collapse
this is data partition, nothing on system
candiesdoodle said:
Enable ARcore and other funky AR apps on stock rom
This little zip enables ARcore for the Asus Max Pro M1 stock rom
Tried and tested successfully on the ZB601KL variant (4/64)
Not tested on custom rom - will probably not work.
What works:
1. Latest ARCore
2. Measure App
3. IKEA app
4. Line draw app
5. AR Stickers modded (see below)
This is based on these two:
https://forum.xda-developers.com/showpost.php?p=76920297&postcount=5176
https://forum.xda-developers.com/showpost.php?p=76580197&postcount=1
Hence thanks to these two gentlemen and full credits to them:
@Arnova8G2
@Stampyron
Steps (reproducing from @Stampyron thread with some modifications) :
Step 1. Download and install ARCore apk from here https://www.apkmirror.com/apk/google-inc/arcore/arcore-1-3-18060406-release/
Step 2. Install an app that use ARCore. If you're lazy, you can use this apk https://www.apkmirror.com/apk/googl...-anywhere-with-ar-2-0-0-android-apk-download/
Step 3. Open the app you installed in step 2 and let it crash. This will make the folders and files that we're going to use later on.
Step 4. Download the file named arcore_x00t.zip
Step 5. Reboot to twrp and and flash the zip file
Step 6. Reboot to system. Now you can use any apps that require ARCore!
NOTE: If you updated ARCore repeat step 3 onwards
ARStickers
ARStickers doesnt work with the apk from apkmirror.com. Use this modded one instead
https://drive.google.com/open?id=17r5Hg-WyRTRVAkqx40vmSHyrDMAxmKQG
(thanks to @Arnova8G2)
Explanation
@Arnova8G2 twrp zip is based on placing a file in the /data partition and renaming it as per the ro.build.product value.
However for stock ROM, the true value that works for this device is what is returned by ro.product.device instead in the system (different from the one in twrp), hence the modification is needed
The value in the fully booted stock rom is "ASUS_X00T_2"
And the second modification needed is to make the file name include "8.1" for latest oreo for this device.
Hence the file name now that works for this device in stock ROM is: "device_profile_ASUS_X00T_2_colon_8.1.textproto"
Enjoy!
Click to expand...
Click to collapse
Does it require a rooted phone?
Abby 244 said:
Does it require a rooted phone?
Click to expand...
Click to collapse
Yes
candiesdoodle said:
Enable ARcore and other funky AR apps on stock rom
This little zip enables ARcore for the Asus Max Pro M1 stock rom
Tried and tested successfully on the ZB601KL variant (4/64)
Not tested on custom rom - will probably not work.
What works:
1. Latest ARCore
2. Measure App
3. IKEA app
4. Line draw app
5. AR Stickers modded (see below)
This is based on these two:
https://forum.xda-developers.com/showpost.php?p=76920297&postcount=5176
https://forum.xda-developers.com/showpost.php?p=76580197&postcount=1
Hence thanks to these two gentlemen and full credits to them:
@Arnova8G2
@Stampyron
Steps (reproducing from @Stampyron thread with some modifications) :
Step 1. Download and install ARCore apk from here https://www.apkmirror.com/apk/google-inc/arcore/arcore-1-3-18060406-release/
Step 2. Install an app that use ARCore. If you're lazy, you can use this apk https://www.apkmirror.com/apk/googl...-anywhere-with-ar-2-0-0-android-apk-download/
Step 3. Open the app you installed in step 2 and let it crash. This will make the folders and files that we're going to use later on.
Step 4. Download the file named arcore_x00t.zip
Step 5. Reboot to twrp and and flash the zip file
Step 6. Reboot to system. Now you can use any apps that require ARCore!
NOTE: If you updated ARCore repeat step 3 onwards
ARStickers Updated to ver 1.2.180326103.apk - 4 July 2018
ARStickers doesnt work with the apk from apkmirror.com. Use this modded one instead
https://drive.google.com/open?id=1DqnA2lFV5QYq7vQDah2IMLlAO285nKzK
(thanks to @Arnova8G2)
Explanation
@Arnova8G2 twrp zip is based on placing a file in the /data partition and renaming it as per the ro.build.product value.
However for stock ROM, the true value that works for this device is what is returned by ro.product.device instead in the system (different from the one in twrp), hence the modification is needed
The value in the fully booted stock rom is "ASUS_X00T_2"
And the second modification needed is to make the file name include "8.1" for latest oreo for this device.
Hence the file name now that works for this device in stock ROM is: "device_profile_ASUS_X00T_2_colon_8.1.textproto"
Enjoy!
Click to expand...
Click to collapse
This method did not work for me. Ar stickers and draw a line app still force closes
---------- Post added at 06:50 PM ---------- Previous post was at 06:24 PM ----------
When I open draw a line app it says "AR CORE KEEPS ON STOPPING".
In recovery zip file is unable flash as digest file cannot be found.
Abby 244 said:
When I open draw a line app it says "AR CORE KEEPS ON STOPPING".
In recovery zip file is unable flash as digest file cannot be found.
Click to expand...
Click to collapse
I tried and it works just fine
Which twrp are you using.
candiesdoodle said:
I tried and it works just fine
Which twrp are you using.
Click to expand...
Click to collapse
I used an otg hard drive .
I so want this feature.:crying:
---------- Post added at 08:52 PM ---------- Previous post was at 08:04 PM ----------
When we go to the AR CORE app link , it provides with 2 versions of the app.
Though I have tried both and none of it worked for me .
I am on the latest build i.e. 311 .
Can I reset the partitions that are already made ?
I don't want to factory reset.
Please help me .
I am a noob
Can I use internal memory of mobile to flash the zip as I don't have a memory card.
Abby 244 said:
I used an otg hard drive .
I so want this feature.:crying:
---------- Post added at 08:52 PM ---------- Previous post was at 08:04 PM ----------
When we go to the AR CORE app link , it provides with 2 versions of the app.
Though I have tried both and none of it worked for me .
I am on the latest build i.e. 311 .
Can I reset the partitions that are already made ?
I don't want to factory reset.
Please help me .
I am a noob
Can I use internal memory of mobile to flash the zip as I don't have a memory card.
Click to expand...
Click to collapse
Yes
Install apks linked here. Then, Just download the zip to your phone. It will come to your internal memory of the phone - in downloads folder. Check using a file explorer such as "es file explorer" or "solid explorer"
Boot into twrp, and flash this file.
Then reboot the system. Done.
Ps- the two apk for arcore are for different platforms. Our phone is arm64, so download that.
candiesdoodle said:
Yes
Install apks linked here. Then, Just download the zip to your phone. It will come to your internal memory of the phone - in downloads folder. Check using a file explorer such as "es file explorer" or "solid explorer"
Boot into twrp, and flash this file.
Then reboot the system. Done.
Ps- the two apk for arcore are for different platforms. Our phone is arm64, so download that.
Click to expand...
Click to collapse
Did what u said , still problem presists. Moreover in twrp my root memory shows 0mb i.e. nothing.
Abby 244 said:
Did what u said , still problem presists. Moreover in twrp my root memory shows 0mb i.e. nothing.
Click to expand...
Click to collapse
Your phone is encrypted. Move that file to sd card and install
Aftab_khatri said:
Your phone is encrypted. Move that file to sd card and install
Click to expand...
Click to collapse
Using otg I get this
Abby 244 said:
Using otg I get this
Click to expand...
Click to collapse
Dude
your data partition is encrypted, you can't flash the zip.
You gotta do it manually after booting into the Rom:
1. Look in the zip for this file
/arcore_x00t.zip/data/data/com.google.ar.core/files/device_profile_database/device_profile_1_colon_8.textproto
2. Copy it to this location with this name. Use a file explorer with root permission:
/data/data/com.google.ar.core/files/device_profile_database/device_profile_ASUS_X00T_2_colon_8.1.textproto
3. Go to a terminal and do these commands
su
restorecon /data/data/com.google.ar.core/files/device_profile_database/device_profile_ASUS_X00T_2_colon_8.1.textproto
4. Reboot.
candiesdoodle said:
Dude
your data partition is encrypted, you can't flash the zip.
You gotta do it manually after booting into the Rom:
1. Look in the zip for this file
/arcore_x00t.zip/data/data/com.google.ar.core/files/device_profile_database/device_profile_1_colon_8.textproto
2. Copy it to this location with this name. Use a file explorer with root permission:
/data/data/com.google.ar.core/files/device_profile_database/device_profile_ASUS_X00T_2_colon_8.1.textproto
3. Go to a terminal and do these commands
su
restorecon /storage/emulated/0/Download/XDA Forums/arcore_x00t.zip/data/data/com.google.ar.core/files/device_profile_database/device_profile_1_colon_8.textproto
4. Reboot.
Click to expand...
Click to collapse
Can i do this without pc?
I was on step 2 of your above mentioned procedure but there was no file as :device_profile_ASUS_X00T_2_colon_8.1.textproto
Instead there was : device_profile_ASUS_A002_1_colon_7.textproto
Abby 244 said:
Can i do this without pc?
I was on step 2 of your above mentioned procedure but there was no file as :device_profile_ASUS_X00T_2_colon_8.1.textproto
Instead there was : device_profile_ASUS_A002_1_colon_7.textproto
Click to expand...
Click to collapse
You have do it on the phone
And ofcourse there is no file with that name. You have to copy it to that folder with that name. Got it?
candiesdoodle said:
You have do it on the phone
And ofcourse there is no file with that name. You have to copy it to that folder with that name. Got it?
Click to expand...
Click to collapse
Thanks for the quick reply. Just gonna try it .
candiesdoodle said:
You have do it on the phone
And ofcourse there is no file with that name. You have to copy it to that folder with that name. Got it?
Click to expand...
Click to collapse
And this happened.
Abby 244 said:
And this happened.
Click to expand...
Click to collapse
Oh common dude
You gotta type whole command in one go
restorecon /data/....
You are trying to execute the actual file..which is wrong
Asus Zenfone Max Pro M1 (X00TD) Stock bootanimation that can either twrp recovery flashable or systemlessly flashable aa magisk module.
Downloads:
Files present in attachment.
Procedure:
1. TWRP recovery flashable: Go to TWRP recovery then flash flashable zip file via 'install' option of twrp just like flashing any other zip.
2. Systemless Magisk Module: Requires Magisk 17.0+ to be installed. Just open magiskmanager app & flash from 'module' section in it.
dr.bathman said:
Asus Zenfone Max Pro M1 (X00TD) Stock bootanimation that can either twrp recovery flashable or systemlessly flashable aa magisk module.
Downloads:
Files present in attachment.
Procedure:
1. TWRP recovery flashable: Go to TWRP recovery then flash flashable zip file via 'install' option of twrp just like flashing any other zip.
2. Systemless Magisk Module: Requires Magisk 17.0+ to be installed. Just open magiskmanager app & flash from 'module' section in it.
Click to expand...
Click to collapse
What is its use???Will it fixes a bootloop??
NandhaNY said:
What is its use???Will it fixes a bootloop??
Click to expand...
Click to collapse
Kindly search on Google: "boot animation"
Flashable for custom pie havoc 2.4
Thanks.
Not Working Android 10
dr.bathman said:
Asus Zenfone Max Pro M1 (X00TD) Stock bootanimation that can either twrp recovery flashable or systemlessly flashable aa magisk module.
Downloads:
Files present in attachment.
Procedure:
1. TWRP recovery flashable: Go to TWRP recovery then flash flashable zip file via 'install' option of twrp just like flashing any other zip.
2. Systemless Magisk Module: Requires Magisk 17.0+ to be installed. Just open magiskmanager app & flash from 'module' section in it.
Click to expand...
Click to collapse
Not working on pixys os, android 10 rom. (magisk and twrp)
Rezaeemanesh said:
Not working on pixys os, android 10 rom. (magisk and twrp)
Click to expand...
Click to collapse
Because location of bootanimtion is changed in android 10
Rezaeemanesh said:
Not working on pixys os, android 10 rom. (magisk and twrp)
Click to expand...
Click to collapse
Uploaded zips for android 10 (q).. check op post.
Does not seem to work with Magisk v20.1. Causes bootloop.
dr.bathman said:
Asus Zenfone Max Pro M1 (X00TD) Stock bootanimation that can either twrp recovery flashable or systemlessly flashable aa magisk module.
Downloads:
Files present in attachment.
Procedure:
1. TWRP recovery flashable: Go to TWRP recovery then flash flashable zip file via 'install' option of twrp just like flashing any other zip.
2. Systemless Magisk Module: Requires Magisk 17.0+ to be installed. Just open magiskmanager app & flash from 'module' section in it.
Click to expand...
Click to collapse
Thanks for the stock bootanimation.zip file.
I'm on Colt 7 ROM (Android 11)
and use Root Explorer App.
Just do the simplest steps;
*Download one of the zip above (I download the 1st one),
In Root Explorer (or any root accessable file browser app) do these:
*Extract it, to get the file bootanimation.zip inside it.
*Find original bootanimation.zip file inside Root/System/Media Folder.
*Make it 'useless' by rename it into something like bootanimation.zip1
*Copy Paste the extracted bootanimation.zip file into that folder (Root/System/Media)
*Change the Permission of the file into RWRR.
*Restart.
*Done.
Hi, I'm new here. I did something wrong. I followed this guide.
[GUIDE] How To bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com
Then I accidently pressed Format Flash and deleted the bootloader.
and my screen wont turn on though i still can see the smartphone vcom usb
Please Help Me