Steps to Root OnePlus 9R with Magisk
Below I have shown step by step procedure to Root OnePlus 9R. You just have to follow each and every step carefully, or else you may face trouble booting up your device again.
Please read the complete guide before applying the steps. This will avoid confusion.
MORE CLEAR STEP IS IN THE ATTACHED FILEThings to remember
Make sure to disable all security Locks on your OnePlus 9R.
Take Full Backup of your Android device.
You need a PC to perform the Commands.
Fully charge your phone.
OnePlus 9R Original USB Cable.
Note: Rooting is a complex process, so if you miss any of the below steps will end up bricking your device. So, make sure to follow all the steps carefully as shown.
We are not responsible for any loss and damage to your device. Apply the below steps with your own risk.
Downloads
In any steps, if the particular file is asked you to download, then you can come here and download it. We will update the links according to the latest build by developers.
Stock Boot Image for OnePlus 9R – OnePlus9ROxygen Os 11.2.1.2. (Should be on this version) PLATFORM
Download Magisk App (Latest Version)
OnePlus USB Drivers (Optional) – Download
SDK Platform Tools – Download
1.) Enable OEM Unlocking on OnePlus 9R
Follow the below steps to enable USB debugging and the OEM Unlock option.
Go to Settings > About Phone > Tap on Build number 5-6 times.
Now go Back > System > Developer options > enable “OEM Unlocking” and “USB debugging”.
If you see the OEM unlocking option is missing or is greyed out, then you need to check few things.
Make sure that you have logged into your Google account.
Also, check if you have an active Internet connection or not.
2.) Unlock Bootloader on OnePlus 9R
Connect your OnePlus 9R device to the PC using the original USB cable.
Open the Platform-tools folder and type “cmd” in the address bar and hit Enter.
The Command window will open.
Connect OnePlus 9R to PC via original USB cable.
On the command window, type the below command. It should display the connected devices.
fastboot devices
Hit Enter, Next type the following command to boot OnePlus 9R into fastboot mode.
adb reboot bootloader
Press “Enter” on your keyboard
Next, type the following command to Unlock the Bootloader on OnePlus 9R. (Note: Unlocking the bootloader will wipe all your data).
fastboot flashing unlock
Press “Enter” on your keyboard
On your phone, press the Volume buttons to move the selector to “UNLOCK THE BOOTLOADER” and press the power button to confirm.
After that, all your data will get erased, and your phone will freshly bootup.
That’s It, the bootloader on OnePlus 9R is successfully unlocked!
Step 3: Install Magisk App on OnePlus 9R
Download and Install the Magisk App on your phone.
Step 4: Flash boot Image
Again return to the Command window and type the following command to boot OnePlus 9R into fastboot mode. Or you can enable advance reboot form developer section and directly enter into fastboot mode
adb reboot bootloader
Once the phone boots into fastboot mode, type the below command to flash our patched boot image file into your phone.
fastboot flash boot boot.img
Next, once the flashing process completes, type the below command to Reboot your OnePlus 9R device.
fastboot reboot
Open the Magisk App and check the Root status.
You can also verify if your rooted OnePlus 9R passes SafetyNet by pressing the “Check SafetyNet” button in Magisk App.
That’s it. You have successfully Rooted your OnePlus 9R smartphone.
where do I get the stock boot image?
EDIT
Download the second file from the stock rom thread, then use this https://github.com/cyxx/extract_android_ota_payload to extract the boot.img file. then transfer that to your phone and then flash.
IS it possible to OTA after rooting ?
Forgive the cross-post, but I wanted to also inform here that the 8T TWRP should have support for 9R in the next build (not out yet) since I added the 9R to the unified script.
Watch the 8T TWRP thread here for progress and that next build which should support 9R: https://forum.xda-developers.com/t/...-unified-stable.4101313/page-72#post-85274307
and you can use my adb insecure patching AK3 zip to get adb access from 9R stock recovery in the meantime here: https://forum.xda-developers.com/t/...-unified-stable.4101313/page-57#post-84204575
Just simply flash this boot.img (op 9r ind)
Make sure that your firmware is 11.2.3.3
& Trust me i am no hacker
magisk_patched-23000_Gf4pM.img
drive.google.com
TWRP is out now. 20210705 build.
osm0sis said:
TWRP is out now. 20210705 build.
Click to expand...
Click to collapse
Booted but unable to decrypt data. Replace kernel/dtb fix that.
Unified kernel source I'm using. https://github.com/AOSPA/android_kernel_oneplus_sm8250
YumeMichi said:
Booted but unable to decrypt data. Replace kernel/dtb fix that.
Unified kernel source I'm using. https://github.com/AOSPA/android_kernel_oneplus_sm8250
Click to expand...
Click to collapse
There's a thread now, please report your findings there: https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-9r.4302449/
Edit: Unwatching this thread now.
HI,
i'm waiting an oneplus 9r, and i wishto root it as soon as i recieve!
i've some doubt, can you please clarify some step below?
thanks in advice for help!
mo0haan said:
Steps to Root OnePlus 9R with Magisk
Below I have shown step by step procedure to Root OnePlus 9R. You just have to follow each and every step carefully, or else you may face trouble booting up your device again.
Please read the complete guide before applying the steps. This will avoid confusion.
MORE CLEAR STEP IS IN THE ATTACHED FILEThings to remember
Make sure to disable all security Locks on your OnePlus 9R.
Take Full Backup of your Android device.
You need a PC to perform the Commands.
Fully charge your phone.
OnePlus 9R Original USB Cable.
Note: Rooting is a complex process, so if you miss any of the below steps will end up bricking your device. So, make sure to follow all the steps carefully as shown.
We are not responsible for any loss and damage to your device. Apply the below steps with your own risk.
Downloads
In any steps, if the particular file is asked you to download, then you can come here and download it. We will update the links according to the latest build by developers.
Stock Boot Image for OnePlus 9R – OnePlus9ROxygen Os 11.2.1.2. (Should be on this version) PLATFORM
Click to expand...
Click to collapse
i've to extract the boot image from this platform tool and copy it on the phone after unlock the bootloader?
mo0haan said:
Download Magisk App (Latest Version)
OnePlus USB Drivers (Optional) – Download
SDK Platform Tools – Download
Click to expand...
Click to collapse
i've to use the adb and fastboot from this tool or from the one above that contains boot image also?
mo0haan said:
1.) Enable OEM Unlocking on OnePlus 9R
Follow the below steps to enable USB debugging and the OEM Unlock option.
Go to Settings > About Phone > Tap on Build number 5-6 times.
Now go Back > System > Developer options > enable “OEM Unlocking” and “USB debugging”.
If you see the OEM unlocking option is missing or is greyed out, then you need to check few things.
Make sure that you have logged into your Google account.
Also, check if you have an active Internet connection or not.
2.) Unlock Bootloader on OnePlus 9R
Connect your OnePlus 9R device to the PC using the original USB cable.
Open the Platform-tools folder and type “cmd” in the address bar and hit Enter.
The Command window will open.
Connect OnePlus 9R to PC via original USB cable.
On the command window, type the below command. It should display the connected devices.
fastboot devices
Hit Enter, Next type the following command to boot OnePlus 9R into fastboot mode.
adb reboot bootloader
Press “Enter” on your keyboard
Next, type the following command to Unlock the Bootloader on OnePlus 9R. (Note: Unlocking the bootloader will wipe all your data).
fastboot flashing unlock
Press “Enter” on your keyboard
On your phone, press the Volume buttons to move the selector to “UNLOCK THE BOOTLOADER” and press the power button to confirm.
After that, all your data will get erased, and your phone will freshly bootup.
That’s It, the bootloader on OnePlus 9R is successfully unlocked!
Step 3: Install Magisk App on OnePlus 9R
Download and Install the Magisk App on your phone.
Click to expand...
Click to collapse
When i install magisk i've to select the boot image that is in platform tool that you linked, patch it and then copy it back on the pc?
mo0haan said:
Step 4: Flash boot Image
Again return to the Command window and type the following command to boot OnePlus 9R into fastboot mode. Or you can enable advance reboot form developer section and directly enter into fastboot mode
adb reboot bootloader
Once the phone boots into fastboot mode, type the below command to flash our patched boot image file into your phone.
fastboot flash boot boot.img
Click to expand...
Click to collapse
mo0haan said:
Next, once the flashing process completes, type the below command to Reboot your OnePlus 9R device.
fastboot reboot
Open the Magisk App and check the Root status.
You can also verify if your rooted OnePlus 9R passes SafetyNet by pressing the “Check SafetyNet” button in Magisk App.
That’s it. You have successfully Rooted your OnePlus 9R smartphone.
Click to expand...
Click to collapse
I did everything exactly as said. And got stuck in a Bootloop
noxlord said:
IS it possible to OTA after rooting ?
Click to expand...
Click to collapse
Did you get the answer?
lvints said:
Did you get the answer?
Click to expand...
Click to collapse
Yeah it's OnePlus , you can definitely update your phone even after rooting installing custom recovery & retain all the mods
lvints said:
Did you get the answer?
Click to expand...
Click to collapse
Non, I know it's possible but I think that the answer can be found in threads from whatever kernel you are using.
I suppose that you would need to restore stock kernel, update, restore custom kernel.
@mo0haan
I would like to ask just to avoid bootloop, I was used to using "fastboot oem unlock" command to unlock OP7's BL.
Is there any explanation for using "fastboot flashing unlock" command for 9R?
Can not enter into fastboot.
phone enters into recovery then when i select fastboot it just restart the phone
OOS 12 cannot be rooted or enter fastboot mode
Hi guys, this is my first time creating a thread at XDA. So if there's anything wrong please correct me, and I'm not a native english speaker so I'm sorry if my word is confusing .
I'm not responsible for any damage that will happen to your phone. So DO IT WITH YOUR OWN RISK.
UNLOCK BOOTLOADER WILL WIPE YOUR INTERNAL STORAGE, so please backup your data first before continue.
Rooting process WILL VOID YOUR GUARANTEE so keep that in mind.
If your phone is below version 320, please update your system first at least until version 320.
READ CAREFULLY, skip a step and it might brick your phone.
* If you want to use TWRP and do more with it, go to THIS THREAD to flash TWRP and flash magisk file yourself.
THIS IS FOR INFINIX NOTE 7 (X690B) ONLY. If your phone is X690/X690C I'm sorry but I can't help you since I don't have such phone model .
Download files:
ADB Tools: download here
Android Driver: download here
Magisk v24.2: download here
Please download the files according to your current build number.
Root file for X690B-H691DE-Q-GL-201014V320
Root file for X690B-H691DE-Q-GL-201201V322
Root file for X690B-H691DE-Q-GL-210127V326
Root file for X690B-H691DE-Q-GL-210415V333
Root file for X690B-H691DE-Q-GL-210622V337
Root file for X690B-H691DE-Q-GL-210630V338
Root file for X690B-H691DE-Q-GL-210730V339
Root file for X690B-H691DE-Q-GL-210930V341
Root file for X690B-H691DE-Q-GL-211130V347
Root file for X690B-H691DE-Q-GL-220215V356
********** PREPARATION **********
Extract the downloaded files in your PC
Open driverInstall.exe and install it.
Open Root folder, copy all the data to ADB_Fastboot folder.
Put Magisk APK to ADB_Fastboot folder and rename it to "magisk.apk".
In your phone, enable Developer Options.
At Developer Options, enable OEM Unlocking, enable USB Debugging, and set Default USB Configuration to File Transfer.
Plug your phone to your PC and run "cmd-here.exe" on your PC.
********** UNLOCK BOOTLOADER **********
If you already unlocked your bootloader, please skip this step.
In this step, your internal storage will be WIPED.
Type adb devices, there will be a popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing unlock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
Your phone is wiped so set it all up again and do number 5 at Preparation step again.
********** ROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_magisk.img.
Type fastboot --disable-verity --disable-verification flash vbmeta vbmeta_empty.img.
Type fastboot reboot.
Your phone will reboot. After it goes to homescreen, type adb install magisk.apk.
Plug out your phone, connect to the internet, and open Magisk.
It'll shows a popup "Requires Additional Setup", tap OK.
Your phone will reboot itself and it's finally rooted.
* If you can't flash boot and vbmeta via fastboot, possibly because you're not installing the driver correctly or you haven't unlock your bootloader yet. So please do that step first.
********** UNROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_ori.img.
Type fastboot flash vbmeta vbmeta_ori.img.
Type fastboot reboot.
********** RELOCK BOOTLOADER **********
FLASH YOUR PHONE TO STOCK ROM FIRST or else YOU WILL BRICK YOUR PHONE.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing lock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
********** SYSTEM UPDATE **********
You need to flash your phone with clean stock ROM and SPFT. This is optional since almost previous system update is just about security and minor improvement. Use MTK Bypass Tool to flash it without DA file.
If you want to uninstall system apps, I suggest to do it via ADB since uninstalling via root app is modifying your system, dangerous and might brick your phone. IDK if you can do it either. Tutorial is on youtube, just search it yourself.
Thanks to topjohnwu for Magisk.
Thanks to HemanthJabalpuri for TWRP.
Thanks to hovatek and X3non at Hovatek Forum for guide.
Hello Bro!
I want to ask you that, my infinix Note 7 BUILD NUMBER (X690B-H691DE-Q-GL-210630V338.
Is these files is 100% works?
Is there is any chances of crashing my phone during your told method?
EjazAhmad said:
Hello Bro!
I want to ask you that, my infinix Note 7 BUILD NUMBER (X690B-H691DE-Q-GL-210630V338.
Is these files is 100% works?
Is there is any chances of crashing my phone during your told method?
Click to expand...
Click to collapse
It works bro. I'm currently using the same build number too. Just make sure you install the driver and unlock bootloader first. Sorry i don't have tutorial video.
NyihuiGamer said:
It works bro. I'm currently using the same build number too. Just make sure you install the driver and unlock bootloader first. Sorry i don't have tutorial video.
Click to expand...
Click to collapse
thanks bro. it's really works for my phone now it rooted
EjazAhmad said:
thanks bro. it's really works for my phone now it rooted
Click to expand...
Click to collapse
Your welcome bro, glad you did it.
NyihuiGamer said:
Hi guys, this is my first time creating a thread at XDA. So if there's anything wrong please correct me, and I'm not a native speaker so I'm sorry if my word is confusing .
I'm not responsible for any damage that will happen to your phone. So DO IT WITH YOUR OWN RISK.
UNLOCK BOOTLOADER WILL WIPE YOUR INTERNAL STORAGE, so please backup your data first before continue.
Rooting process WILL VOID YOUR GUARANTEE so keep that in mind.
If your phone is below version 320, please update your system first at least until version 320.
READ CAREFULLY, skip a step and it might brick your phone.
* There's Re-lock Bootloader and System Update guide at the bottom, so read it if you need it.
THIS IS FOR INFINIX NOTE 7 (X690B) ONLY. If your phone is X690/X690C I'm sorry but I can't help you since I don't have such phone model .
Please download the files according to your current build number.
Root file for X690B-H691DE-Q-GL-201014V320
Root file for X690B-H691DE-Q-GL-201201V322
Root file for X690B-H691DE-Q-GL-210127V326
Root file for X690B-H691DE-Q-GL-210415V333
Root file for X690B-H691DE-Q-GL-210622V337
Root file for X690B-H691DE-Q-GL-210630V338
* Magisk version 23.0
********** PREPARATION **********
Extract the downloaded files in your PC
Open driverInstall.exe and install it.
Open Root folder, copy all the data to ADB_Fastboot folder.
In your phone, enable Developer Options.
At Developer Options, enable OEM Unlocking, enable USB Debugging, and set Default USB Configuration to File Transfer.
Plug your phone to your PC and run "cmd-here.exe" on your PC.
********** UNLOCK BOOTLOADER **********
If you already unlocked your bootloader, please skip this step.
In this step, your internal storage will be WIPED.
Type adb devices, there will be a popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing unlock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
Your phone is wiped so set it up all again and do just like number 5 at Preparation step again.
********** ROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_magisk.img.
Type fastboot flash vbmeta vbmeta_patched.img.
Type fastboot reboot.
Your phone will reboot. After it goes to homescreen, type adb install magisk.apk.
Plug out your phone, connect to the internet, and open Magisk.
It'll shows a popup "Requires Additional Setup", tap OK.
Your phone will reboot itself and viola, it's finally rooted.
* If you can't flash boot and vbmeta via fastboot, possibly because you're not installing the driver or you haven't unlock your bootloader yet. So please do that step first.
********** UNROOT/FLASH VIA FASTBOOT **********
I haven't tried unroot my phone via Magisk app. So just to be safe, follow this unroot tutorial.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_ori.img.
Type fastboot flash vbmeta vbmeta_ori.img.
Type fastboot reboot.
********** RELOCK BOOTLOADER **********
UNROOT YOUR PHONE FIRST or YOU WILL BRICK YOUR PHONE.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing lock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
********** SYSTEM UPDATE **********
Basically it's doable, but only if your system partition is unmodified. You just unroot your phone and update the system in Settings.
If you want to uninstall system apps, I suggest just uninstall it via ADB since uninstalling via root app is modifying your system, dangerous and might brick your phone. Tutorial is alot on youtube so just search it yourself.
Thanks to topjohnwu for Magisk.
Thanks to hovatek and X3non at Hovatek Forum for guide.
Click to expand...
Click to collapse
Bro when i use command fastboot flash boot boot_magisk.img
It shows (not recognized as an internal or external command) please help any solution
NyihuiGamer said:
Hi guys, this is my first time creating a thread at XDA. So if there's anything wrong please correct me, and I'm not a native speaker so I'm sorry if my word is confusing .
I'm not responsible for any damage that will happen to your phone. So DO IT WITH YOUR OWN RISK.
UNLOCK BOOTLOADER WILL WIPE YOUR INTERNAL STORAGE, so please backup your data first before continue.
Rooting process WILL VOID YOUR GUARANTEE so keep that in mind.
If your phone is below version 320, please update your system first at least until version 320.
READ CAREFULLY, skip a step and it might brick your phone.
* There's Re-lock Bootloader and System Update guide at the bottom, so read it if you need it.
THIS IS FOR INFINIX NOTE 7 (X690B) ONLY. If your phone is X690/X690C I'm sorry but I can't help you since I don't have such phone model .
Please download the files according to your current build number.
Root file for X690B-H691DE-Q-GL-201014V320
Root file for X690B-H691DE-Q-GL-201201V322
Root file for X690B-H691DE-Q-GL-210127V326
Root file for X690B-H691DE-Q-GL-210415V333
Root file for X690B-H691DE-Q-GL-210622V337
Root file for X690B-H691DE-Q-GL-210630V338
* Magisk version 23.0
********** PREPARATION **********
Extract the downloaded files in your PC
Open driverInstall.exe and install it.
Open Root folder, copy all the data to ADB_Fastboot folder.
In your phone, enable Developer Options.
At Developer Options, enable OEM Unlocking, enable USB Debugging, and set Default USB Configuration to File Transfer.
Plug your phone to your PC and run "cmd-here.exe" on your PC.
********** UNLOCK BOOTLOADER **********
If you already unlocked your bootloader, please skip this step.
In this step, your internal storage will be WIPED.
Type adb devices, there will be a popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing unlock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
Your phone is wiped so set it up all again and do just like number 5 at Preparation step again.
********** ROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_magisk.img.
Type fastboot flash vbmeta vbmeta_patched.img.
Type fastboot reboot.
Your phone will reboot. After it goes to homescreen, type adb install magisk.apk.
Plug out your phone, connect to the internet, and open Magisk.
It'll shows a popup "Requires Additional Setup", tap OK.
Your phone will reboot itself and viola, it's finally rooted.
* If you can't flash boot and vbmeta via fastboot, possibly because you're not installing the driver or you haven't unlock your bootloader yet. So please do that step first.
********** UNROOT/FLASH VIA FASTBOOT **********
I haven't tried unroot my phone via Magisk app. So just to be safe, follow this unroot tutorial.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_ori.img.
Type fastboot flash vbmeta vbmeta_ori.img.
Type fastboot reboot.
********** RELOCK BOOTLOADER **********
UNROOT YOUR PHONE FIRST or YOU WILL BRICK YOUR PHONE.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing lock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
********** SYSTEM UPDATE **********
Basically it's doable, but only if your system partition is unmodified. You just unroot your phone and update the system in Settings.
If you want to uninstall system apps, I suggest just uninstall it via ADB since uninstalling via root app is modifying your system, dangerous and might brick your phone. Tutorial is alot on youtube so just search it yourself.
Thanks to topjohnwu for Magisk.
Thanks to hovatek and X3non at Hovatek Forum for guide.
Click to expand...
Click to collapse
Thank you so much bro I had been Trying from months ...It Worked I have successfully Rooted my Infinix Note 7 thanks you so much love you bro
BilalkhAn1723 said:
Thank you so much bro I had been Trying from months ...It Worked I have successfully Rooted my Infinix Note 7 thanks you so much love you bro
Click to expand...
Click to collapse
Oh, you solve your problem. Your welcome bro .
NyihuiGamer said:
Oh, you solve your problem. Your welcome bro .
Click to expand...
Click to collapse
I unroot my infinix and when i try to root it agian it stuck in fastboot logo and didn't bootpls help!
Help me2 said:
I unroot my infinix and when i try to root it agian it stuck in fastboot logo and didn't bootpls help!
Click to expand...
Click to collapse
I want to root it again
Help me2 said:
I want to root it again
Click to expand...
Click to collapse
Are you sure you match it with your current firmware?
NyihuiGamer said:
Are you sure you match it with your current firmware?
Click to expand...
Click to collapse
Yes
Help me2 said:
Yes
Click to expand...
Click to collapse
i rooted my infinix successfully first time v338
then i flashed boot_ori.image and boot to unrooted system , all good.
But when i tried to root it same way again, it won't work anymore. once flash magisk_boot.img, only reboot to fastboot.
Any one can help ?
Thanks a lot
i rooted my infinix successfully first time v338
then i flashed boot_ori.image and boot to unrooted system , all good.
But when i tried to root it same way again, it won't work anymore. once flash magisk_boot.img, only reboot to fastboot.
Any one can help ?
Thanks a lot
NyihuiGamer said:
Hi guys, this is my first time creating a thread at XDA. So if there's anything wrong please correct me, and I'm not a native english speaker so I'm sorry if my word is confusing .
I'm not responsible for any damage that will happen to your phone. So DO IT WITH YOUR OWN RISK.
UNLOCK BOOTLOADER WILL WIPE YOUR INTERNAL STORAGE, so please backup your data first before continue.
Rooting process WILL VOID YOUR GUARANTEE so keep that in mind.
If your phone is below version 320, please update your system first at least until version 320.
READ CAREFULLY, skip a step and it might brick your phone.
* There's Re-lock Bootloader and System Update guide at the bottom, so read it if you need it.
THIS IS FOR INFINIX NOTE 7 (X690B) ONLY. If your phone is X690/X690C I'm sorry but I can't help you since I don't have such phone model .
Please download the files according to your current build number.
Root file for X690B-H691DE-Q-GL-201014V320
Root file for X690B-H691DE-Q-GL-201201V322
Root file for X690B-H691DE-Q-GL-210127V326
Root file for X690B-H691DE-Q-GL-210415V333
Root file for X690B-H691DE-Q-GL-210622V337
Root file for X690B-H691DE-Q-GL-210630V338
Root file for X690B-H691DE-Q-GL-210730V339
* Magisk version 23.0
********** PREPARATION **********
Extract the downloaded files in your PC
Open driverInstall.exe and install it.
Open Root folder, copy all the data to ADB_Fastboot folder.
In your phone, enable Developer Options.
At Developer Options, enable OEM Unlocking, enable USB Debugging, and set Default USB Configuration to File Transfer.
Plug your phone to your PC and run "cmd-here.exe" on your PC.
********** UNLOCK BOOTLOADER **********
If you already unlocked your bootloader, please skip this step.
In this step, your internal storage will be WIPED.
Type adb devices, there will be a popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing unlock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
Your phone is wiped so set it all up again and do number 5 at Preparation step again.
********** ROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_magisk.img.
Type fastboot --disable-verity --disable-verification flash vbmeta vbmeta_empty.img.
Type fastboot reboot.
Your phone will reboot. After it goes to homescreen, type adb install magisk.apk.
Plug out your phone, connect to the internet, and open Magisk.
It'll shows a popup "Requires Additional Setup", tap OK.
Your phone will reboot itself and it's finally rooted.
* If you can't flash boot and vbmeta via fastboot, possibly because you're not installing the driver correctly or you haven't unlock your bootloader yet. So please do that step first.
********** UNROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_ori.img.
Type fastboot flash vbmeta vbmeta_ori.img.
Type fastboot reboot.
********** RELOCK BOOTLOADER **********
UNROOT YOUR PHONE FIRST or else YOU WILL BRICK YOUR PHONE.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing lock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
********** SYSTEM UPDATE **********
Basically it's doable, but only if your system partition is unmodified. You just unroot your phone and update the system in Settings.
* Starting from firmware version X690B-H691DE-Q-GL-210630V338, if you already unroot your phone and it still failed to update, you need to flash your phone with clean stock ROM and SPFT. This is optional since almost previous system update is just about security and minor improvement. Use MTK Bypass Tool to flash it without DA file.
If you want to uninstall system apps, I suggest to do it via ADB since uninstalling via root app is modifying your system, dangerous and might brick your phone. IDK if you can do it either. Tutorial is on youtube, just search it yourself.
Thanks to topjohnwu for Magisk.
Thanks to hovatek and X3non at Hovatek Forum for guide.
Click to expand...
Click to collapse
bro can u provide twrp or made a post how to get infinix note 7 twrp
NyihuiGamer said:
Hi guys, this is my first time creating a thread at XDA. So if there's anything wrong please correct me, and I'm not a native english speaker so I'm sorry if my word is confusing .
I'm not responsible for any damage that will happen to your phone. So DO IT WITH YOUR OWN RISK.
UNLOCK BOOTLOADER WILL WIPE YOUR INTERNAL STORAGE, so please backup your data first before continue.
Rooting process WILL VOID YOUR GUARANTEE so keep that in mind.
If your phone is below version 320, please update your system first at least until version 320.
READ CAREFULLY, skip a step and it might brick your phone.
* There's Re-lock Bootloader and System Update guide at the bottom, so read it if you need it.
THIS IS FOR INFINIX NOTE 7 (X690B) ONLY. If your phone is X690/X690C I'm sorry but I can't help you since I don't have such phone model .
Please download the files according to your current build number.
Root file for X690B-H691DE-Q-GL-201014V320
Root file for X690B-H691DE-Q-GL-201201V322
Root file for X690B-H691DE-Q-GL-210127V326
Root file for X690B-H691DE-Q-GL-210415V333
Root file for X690B-H691DE-Q-GL-210622V337
Root file for X690B-H691DE-Q-GL-210630V338
Root file for X690B-H691DE-Q-GL-210730V339
* Magisk version 23.0
********** PREPARATION **********
Extract the downloaded files in your PC
Open driverInstall.exe and install it.
Open Root folder, copy all the data to ADB_Fastboot folder.
In your phone, enable Developer Options.
At Developer Options, enable OEM Unlocking, enable USB Debugging, and set Default USB Configuration to File Transfer.
Plug your phone to your PC and run "cmd-here.exe" on your PC.
********** UNLOCK BOOTLOADER **********
If you already unlocked your bootloader, please skip this step.
In this step, your internal storage will be WIPED.
Type adb devices, there will be a popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing unlock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
Your phone is wiped so set it all up again and do number 5 at Preparation step again.
********** ROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_magisk.img.
Type fastboot --disable-verity --disable-verification flash vbmeta vbmeta_empty.img.
Type fastboot reboot.
Your phone will reboot. After it goes to homescreen, type adb install magisk.apk.
Plug out your phone, connect to the internet, and open Magisk.
It'll shows a popup "Requires Additional Setup", tap OK.
Your phone will reboot itself and it's finally rooted.
* If you can't flash boot and vbmeta via fastboot, possibly because you're not installing the driver correctly or you haven't unlock your bootloader yet. So please do that step first.
********** UNROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_ori.img.
Type fastboot flash vbmeta vbmeta_ori.img.
Type fastboot reboot.
********** RELOCK BOOTLOADER **********
UNROOT YOUR PHONE FIRST or else YOU WILL BRICK YOUR PHONE.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing lock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
********** SYSTEM UPDATE **********
Basically it's doable, but only if your system partition is unmodified. You just unroot your phone and update the system in Settings.
* Starting from firmware version X690B-H691DE-Q-GL-210630V338, if you already unroot your phone and it still failed to update, you need to flash your phone with clean stock ROM and SPFT. This is optional since almost previous system update is just about security and minor improvement. Use MTK Bypass Tool to flash it without DA file.
If you want to uninstall system apps, I suggest to do it via ADB since uninstalling via root app is modifying your system, dangerous and might brick your phone. IDK if you can do it either. Tutorial is on youtube, just search it yourself.
Thanks to topjohnwu for Magisk.
Thanks to hovatek and X3non at Hovatek Forum for guide.
Click to expand...
Click to collapse
Bro, do you have custom ROM recommendation matched with Infinix Note 7? My version is V339.
OREOxd said:
bro can u provide twrp or made a post how to get infinix note 7 twrp
Click to expand...
Click to collapse
There's tutorial on hovatek forum, you can try it. I haven't tried that but if you want to try and error just go there and do it yourself.
Zienho said:
Bro, do you have custom ROM recommendation matched with Infinix Note 7? My version is V339.
Click to expand...
Click to collapse
IDK about custom rom, but you can try GSI ROM. AFAIK only AOSP based rom can boot on this device. Maybe i'm doing it wrong because i'm not a linux expert, so just flash it yourself using fastbootd method.
NyihuiGamer said:
There's tutorial on hovatek forum, you can try it. I haven't tried that but if you want to try and error just go there and do it yourself.
IDK about custom rom, but you can try GSI ROM. AFAIK only AOSP based rom can boot on this device. Maybe i'm doing it wrong because i'm not a linux expert, so just flash it yourself using fastbootd method.
Click to expand...
Click to collapse
Thanks bro for the reply. I am on way doing it.
Thank You, I did it on V341. The steps are clearly easy to be understood.
Can you help me to update my system update? Im done unrooting may infinix note 7 but still it is error when start updating. Can you also create a tutorial on how to flash this phone so i can update it using wifi only, thankyou.
Pleas guys, is there a way to put this device in DIAG MODE or a rom modified to get root without MI account?
int211 said:
Pleas guys, is there a way to put this device in DIAG MODE or a rom modified to get root without MI account?
Click to expand...
Click to collapse
How to enter DIAG Mode and backup IMEI using QPST - Xiaomi Firmware
If you’re looking for a ways on how to enter DIAG Mode and restore / backup IMEI on Xiaomi smartphone here’s a complete guide. Below you’ll find few working methods on how to boot your device in DIAG mode and backup IMEI with Qualcomm Product Support Tools.Advertisement Entering DIAG Mode and...
xiaomifirmware.com
or
*#*#717717#*#*
or
*#*#426#*#*
or
use terminal method (google it)
or youtube
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjmmb7B6eDyAhWJG-wKHXbtBVIQwqsBegQIBhAB&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D8ZzQPwD7bnE&usg=AOvVaw2rqhhONfY3ZJhbDcDfglYU
please leave a lik or"thanks" button if a method work and tell update on which one worked
I tryed now this way but with no unlock bootloader have failure, I forgot to say the bootloader is locked, its hard
int211 said:
I tryed now this way but with no unlock bootloader have failure, I forgot to say the bootloader is locked, its hard
Click to expand...
Click to collapse
Youve tried unlocking from developer options?
NOTE: I AM NOT IN ANYWAY RESPONSIBLE FOR YOU BRICKING OR DAMAGING YOUR DEVICE, I WILL NOT BE HELD LIABLE FOR YOUR ACTIONS
Steps to unlock the bootloader Xiaomi Redmi Note 10
download and install adb and fastboot tools on pc,
open the folder where you installed adb fastboot tools
go to your phone
Unlock your phone and open the Settings menu.
Go to settings, very bottom system or device info open it
Tap build number several times andl do what must be done to enable developer option
Go to Settings--> System -> Developer Options. You will see a list of special options.
Find the following option: “OEM unlocking. Allow the bootloader to be unlocked”.
Tap on the toggle to enable OEM unlocking.
Enable USB debugging as well in the developer settings
A prompt will come up on your phone and choose always allow this Pc to connect and accept
Options
1
On your Pc ,Go to where you installed adb and fastboot "where the files and app are"
shift + right click empty area and open cmd or powershell here
Type adb reboot bootloader and Hit Enter
or
2
Press and hold the power button. Tap on Power off to turn off the phone.
Connect your phone to your computer using a USB cable.
then
Open CMD/Powershell on your computer, and enter the following command: fastboot devices
If the terminal returns something, it means the computer is successfully communicating with the phone.
Run the unlocking command: fastboot flashing unlock (if this doesnt work google fastboot unlocking commands and try the ones they have there)
The screen of the phone will give you two options once you run the unlocking command. Choose Unlock the bootloader using volume buttons.
Press the Power button to confirm your selection.
your bootloader is now unlocked happy rooting
flairepathos.info said:
Youve tried unlocking from developer options?
NOTE: I AM NOT IN ANYWAY RESPONSIBLE FOR YOU BRICKING OR DAMAGING YOUR DEVICE, I WILL NOT BE HELD LIABLE FOR YOUR ACTIONS
Steps to unlock the bootloader Xiaomi Redmi Note 10
download and install adb and fastboot tools on pc,
open the folder where you installed adb fastboot tools
go to your phone
Unlock your phone and open the Settings menu.
Go to settings, very bottom system or device info open it
Tap build number several times andl do what must be done to enable developer option
Go to Settings--> System -> Developer Options. You will see a list of special options.
Find the following option: “OEM unlocking. Allow the bootloader to be unlocked”.
Tap on the toggle to enable OEM unlocking.
Enable USB debugging as well in the developer settings
A prompt will come up on your phone and choose always allow this Pc to connect and accept
Options
1
On your Pc ,Go to where you installed adb and fastboot "where the files and app are"
shift + right click empty area and open cmd or powershell here
Type adb reboot bootloader and Hit Enter
or
2
Press and hold the power button. Tap on Power off to turn off the phone.
Connect your phone to your computer using a USB cable.
then
Open CMD/Powershell on your computer, and enter the following command: fastboot devices
If the terminal returns something, it means the computer is successfully communicating with the phone.
Run the unlocking command: fastboot flashing unlock (if this doesnt work google fastboot unlocking commands and try the ones they have there)
The screen of the phone will give you two options once you run the unlocking command. Choose Unlock the bootloader using volume buttons.
Press the Power button to confirm your selection.
your bootloader is now unlocked happy rooting
Click to expand...
Click to collapse
That's not a proper unlock bootloader..it is safe unlock bootloader using unlock tools from xiaomi. If you unlock the bootloader to CMD it's a chance to brick. I think the proper to unlock is xiaomi tools
akoaypinoy said:
That's not a proper unlock bootloader..it is safe unlock bootloader using unlock tools from xiaomi. If you unlock the bootloader to CMD it's a chance to brick. I think the proper to unlock is xiaomi tools
Click to expand...
Click to collapse
Both are safe but through fastboot, xiaomi wouldnt know that your mi acccount is linked to an unlocked device
flairepathos.info said:
Both are safe but through fastboot, xiaomi wouldnt know that your mi acccount is linked to an unlocked device
Click to expand...
Click to collapse
Yup. There's a chance if using CMD authenticated issue mi acc
akoaypinoy said:
Yup. There's a chance if using CMD authenticated issue mi acc
Click to expand...
Click to collapse
Well mi unlock tools will be your option to go for them
flairepathos.info said:
Youve tried unlocking from developer options?
NOTE: I AM NOT IN ANYWAY RESPONSIBLE FOR YOU BRICKING OR DAMAGING YOUR DEVICE, I WILL NOT BE HELD LIABLE FOR YOUR ACTIONS
Steps to unlock the bootloader Xiaomi Redmi Note 10
download and install adb and fastboot tools on pc,
open the folder where you installed adb fastboot tools
go to your phone
Unlock your phone and open the Settings menu.
Go to settings, very bottom system or device info open it
Tap build number several times andl do what must be done to enable developer option
Go to Settings--> System -> Developer Options. You will see a list of special options.
Find the following option: “OEM unlocking. Allow the bootloader to be unlocked”.
Tap on the toggle to enable OEM unlocking.
Enable USB debugging as well in the developer settings
A prompt will come up on your phone and choose always allow this Pc to connect and accept
Options
1
On your Pc ,Go to where you installed adb and fastboot "where the files and app are"
shift + right click empty area and open cmd or powershell here
Type adb reboot bootloader and Hit Enter
or
2
Press and hold the power button. Tap on Power off to turn off the phone.
Connect your phone to your computer using a USB cable.
then
Open CMD/Powershell on your computer, and enter the following command: fastboot devices
If the terminal returns something, it means the computer is successfully communicating with the phone.
Run the unlocking command: fastboot flashing unlock (if this doesnt work google fastboot unlocking commands and try the ones they have there)
The screen of the phone will give you two options once you run the unlocking command. Choose Unlock the bootloader using volume buttons.
Press the Power button to confirm your selection.
your bootloader is now unlocked happy rooting
Click to expand...
Click to collapse
At first, tks for all.
I tried to root with your informations but always get the same information, they say I don't have permition to do anything else.
"FAILED (remote: 'Token Verify Failed, Reboot the device')
in fastboot: error: Command failed
in ADB token error still the same.
Some other Idea to try help will be appreciated
Sorry my bad english.
int211 said:
At first, tks for all.
I tried to root with your informations but always get the same information, they say I don't have permition to do anything else.
"FAILED (remote: 'Token Verify Failed, Reboot the device')
in fastboot: error: Command failed
in ADB token error still the same.
Some other Idea to try help will be appreciated
Sorry my bad english.
Click to expand...
Click to collapse
You must unlock bootloader first
Does uypur phone show the authorization popup when you connect for adb and have you allowed always allow this device?
What are you all talking about in this thread?
There is NO WAY to initially unlock the bootloader without MI account, phoning home and waiting 167+hours.
PERIOD. let that sink in.
int211 said:
Pleas guys, is there a way to put this device in DIAG MODE or a rom modified to get root without MI account?
Click to expand...
Click to collapse
Whatever you want to do after that, requires this step before. There is no "root without MI account".