Hi all,
can anybody, who has one of these two cases, tell me if they produce problems with tempered glass screen protectors?
I don't want to place a order and send it back again if they lift off my screen protector.
Best regards
I have a Tech21 Impact Tactical case on my Z3 and was looking for the same information.
From what I've been able to find out, the PThink tempered glass protector does not cover the entire width of the phone, so it may work.
An Amazon review said the PThink tempered glass protector worked fine with a spigen case.
I've ordered the PThink protector. I'll follow up once I've received it and installed it.
FYI, the PThink tempered glass screen protector fits great when used in conjunction with the Tech21 Impact Tactical case.
I have the Tudia ultra slim lite case on my LG G3 and really like it a lot. However, it doesn't work very well with my current Pleson tempered glass screen protector because the Tudia's edge's extend over the Pleson's edges, and it can catch on the glass and lift it up. I'm already going to need to replace the Pleson because dirt has gotten under one of its edges.
So, is anyone using a Tudia with a tempered glass screen protector that fits? If so, which one are you using?
I am considering picking up a OnePlus 5 since they have the student discount right now and am wondering, what is the recommended tempered glass screen protector and case to protect the phone.
I love Nillkin tempered glass screen protectors for the OnePlus One, Nexus 5, and Xiaomi Redmi Note 3, but it seems they really dropped the ball on the OnePlus 5. The screen protector doesn't even cover the whole screen! Then there's Orzly which covers the screen but the quality itself is not as great. So who does that leave then? What would you recommend?
I also don't know what case to choose. I was thinking of picking up the Nillkin Super Frosted Shield Matte case, but I wanna see what other alternatives XDA likes.
To be honest, the Nillkin is probably the best at the moment, it's got full face adhesion unlike a lot of the others which only have adhesive on the black borders, which means the main screen hovers slightly above the phone's screen which gives a rainbow effect when you use it. It's also compatible with pretty much every case because it's not pushing up against them like a lot of the others. The only thing about it is you can see dust around it as it doesn't reach the edges but this doesn't affect it's use and can be cleaned with a good wipe (I recommend these).
Spigen cases are nice but seem to be the worst for lifting the edges of any larger screen protector (including the official one).
The official screen protector from OnePlus is not compatible with the Otterbox case so remember that when you make your choice, both companies have stated this.
As for cases my personal favourite is the Spigen Neo Hybrid, I just love the way it looks.
I agree with @djsubterrain. Go for the Nillkin.
But if you want a tgsp which covers all of the screen, I recommend you this one : https://forum.xda-developers.com/on...-automatic-adsorption-tempered-glass-t3660494
This tgsp is full adhesive, not only on the black borders. It fits perfectly with the sandstone case from OnePlus.
If you go with glass screen protector, don't get any of the ones that go edge to edge, they all suffer from the same problems such as dust getting underneath and the rainbow effect. As the others mentioned, the Nillkin is your best bet for glass.
As for cases, Spigen always makes good high quality cases and they have a couple of models available, I just recently got the Ultra Hybrid Clear case. I know clear cases tend to turn yellowish with time, but I like to show off my Dbrand skins.
Is the included clear case tempered glass screen protector friendly, or does it lift it up from corners? Any recommendations for screen protector? And if that included one is no good, also recommendation for clear case is appreciated.
im using the MOFI full screen tempered glass screen protector with the factory case without issue.... just too bad the MOFi looks like a oild slick in the middle of the screen otherwise it would be perfect
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Am I not right in thinking this phone comes with a screen protector already on it.? Mine looks like it does, obv don't want to try and take it off in case it is one lol... Came with a clear case too
Cheap tempered glass + clear case (Huawei case)
I used the clear case which came with the phone as for tempered glass I used a cheap (£1.99) from eBay.
The tempered glass covers the screen almost perfect. It isn't edge to edge, but it is wide as the screen.
The glass hasn't got a good oleophobic coating, but is better than the plastic one and has adhesive on entire surface. (i would add a photo but I've got no clue how?
Hi all, is there any spigen neo hybrid alternative for Huawei P20 Pro?
Hi, any issues getting the tempered glass on with the Spigen case? Thanks
RubyRP62 said:
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Click to expand...
Click to collapse
I've applied Zabra tempered glass (Amazon purchase) without any bubbles but after applying the Huawei clear case, edges came out, disabling my screen touch features.
Highly not recommended to buy this "Zabra full glue 9H tempered glass screen protector"
On of the best tempered glass for P20 PRO is Nillkin the hall series..
I have try Nillkin amazing H (3mm cover real screen leave 2mm at the edges case friendly) Nillkin amazing H+ (2,6mm cover real screen leave 2mm at the edges case friendly best clarity) & Nillkin CP-MAX 3D (3mm Full Cover edge to edge full adhesive full glue)
They are all fit perfect with excellent fit & clarity
No bubbles, no rainbow effect, no halo effect, no dot matrix, no fingerprints
I prefer CP-MAX 3D for full protection with original clear silicone case or ipaky case
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
those side adhesive screen protectors suck!!!
whitestone is loca based and because of that full adhesive and it will be released in a week or so on amazon. great feel to the proctector, just like the original screen, no 3d dot matrix, no problems with touch sensitivity, almost no fingerprints and if they are gone with one wipe and so on.
i will get it asap since it's doing fantastic on my note 8 for over 9 months now.
i got the spigen rugged armour and i love it. Feels great in your hands. its like velvety soft. Using this with the stock screen protector, which i feel is sufficient for me
i just wish spigen released the ultra hybrid clear case with a built in kickstand for this phone.
I've never used a protector on my previous phones but opted for the Spigen and think it's great. Had it in five days now, doesn't get too messy from fingerprints and only issue with haloing was my fault, had to take it off a couple times as I want happy with how I put it on. Used it in direct sunlight and was amazed, after one Samsung and two Sony's I can actually read my phone outside"
TheRedIndian said:
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
Click to expand...
Click to collapse
I bought the Spigen Slim Armor case ( £15 ) and Spigen Tempered Glass ( about £8 ) and am very happy with both. I moved from Otterbox a few years ago when I couldn't see a decent case that I liked. I've had 4 Spigen cases for various phones so far and have never been let down to date
ESR products for me fits perfectly
It looks like there are not much good options for this phone (compared to my last one), I have ordered the spigen ultra hybrid (transparent) & tempered glass combo.
I'll post photos with the result
Do some regions not get an included case? I just bought this device yesterday in Canada and there was no case with it.
Spigen crystal clear case and Nillkin Amazing H+ for tempered screen. Trust me, this glass protector is the only one I have found to not retain fingerprints and to stick perfectly and evenly on the 20 pro. If you correctly align it with the edges of the screen, there will be no air pocket whatsoever. It's impressive.
Anybody know the brand of this screen protector and where I can get one? I'm most interested because, well, it's full screen and not just adhesive around the edge. But also the guy mentioned it works with the case I'm going to be using ( UAG ) .
https://www.youtube.com/watch?v=FymSOb_3vOs
I have the S8 with the aforementioned case and bought a film screen protector that was supposedly case friendly but turned out to be the opposite. The screen protector is lifting from the case and so I need one that'll actually work with the Tough Armour case. Any ideas which ones work with it and are purchasable from the UK?
Perhaps the best screen protector for S8 Active is iCarez [Tempered Glass].
Unfortunately, it is currently unavailable, but you can try to find by name on ebay.