My last and my current smartphones were nexus devices. Since google revealed the pixel I thought about other smartphones. But I don't like update speed from non-google companies.
How difficult would it be to convert the current Stock Android (for example android 7) to the Huawei P9, OnePlus 3 or the Samsung Galaxy S7 or any other top device.
And how much time would you need to support also the curved Display from the Samsung Galaxy S7 Edge or to support the notification button from the OnePlus 3 and the fast charging.
To myself: I would say that I am quite good at Java but not in a professional way.It is just a hobby.
In general: If I buy the latest smartphone of a company like Huawei, Samsung, OnePlus or LG would it be possible to convert the current Android version to my device? How much time would I need for that if I only want the Stock Android functions and the fingerprint sensor (Cyanogen features are not needed) and how long would I need if I also want to support the device specific features like a pen or a curved display?
How dangerous would that be? Breaking my device would be pretty easy right?
If that is possible how do I convert the Stock android to my device?
Thanks a lot
p4
short answer: very difficult. Huawei uses custom SoC from HiSilicon, and the specs for these chips is not published. similarly for Samsung devices using Exynos chips. Samsung phones running Qualcomm have a better chance.
if you want to learn to build AOSP (or something like CM), start with the AOSP documentation, then the CM wiki. Or go to the device forums here and check if someone has already started progress. for Huawei and Samsung (exynos), it's a long journey.
it goes well beyond knowing Java.
relatively speaking, modern devices are tough to permanently brick as long as you don't touch the bootloaders.
Thanks for the answer
Hi everyone, I'm sorry if I'm posting under the "Android General" section, but I think that my thread deserves a "general" discussion.
I've been following GCam's portings since the beginning and I've also used them on several devices like: Nokia 8, Nokia 8.1, Nokia 6.1 and LG G6 thanks to their Hardware Level Support set to Level3 (maximum). The question, now, is the following: in your opinion, which will be the best smartphone to run the upcoming ports from Google Pixel 4 new camera? I mean, it is no secret that the latest device from Google will include a triple-lens setup, so it's pretty obvious to think of a phone that has, at least, a wide and a tele-photo lens.
Thanks for moving my thread to the right section.
I'm scared I haven't explained pretty well what I was asking. I'll try that again.
Assuming that Google Pixel 4 will be having a triple-lens set up (tele, normal and wide), which will be the smartphone that will produce images as close as possibile to the Pixel after installing a Google Camera Port? It's pretty obvious that we have to look at a smartphone with a triple-lens set up too and with Camera 2 API enabled by default. On top of that it would also be ideal to have a Snapdragon 845/855/855+ at least and photographic sensor made by Sony (which very likely Google Pixel 4 is supposed to have).
Trying to do an analogy with Google Pixel 2, we can easily assume that one of the best smartphone to install a Camera Port was the Nokia 7 Plus, not only for having AndroidOne, Camera 2 API enabled but also for the same Sony IMX362 Exmor RS (sensor).
Up
Very interested also. I have a Pocophone, and runs gcam 6 quite well, but not perfect. From seeing it barely running on a Redmi Note 7, I assume it seem a top of the line processor and lots of RAM.
Which phone would be the best nowdays? K20?
Up, that would be nice to have a list of the top 10 Gcam smartphones 2020.
Hello, I still have my Mi Pad 2 (16GB) laying around and i've been thinking about replacing its battery and then install some sort of alternative OS such as Ubuntu, Chrome OS, Android x86 etc... I saw some topics here and on other websites but only a few people actually got those OS's working but didn't provide any instructions whatsoever.
Is someone still interested in this device? If so, any help and support would be appreciated.
Yes, I am still using it. I had already replaced the batteries once.
Trying to find a good custom ROM.
ksmukta said:
Yes, I am still using it. I had already replaced the batteries once.
Trying to find a good custom ROM.
Click to expand...
Click to collapse
Is it easy to replace the battery? I'm thinking about getting a new one. Btw, what ROM are you using at the moment?
Yes I am ，but i flash win10 2004 . and Improved heat dissipation，Now, the only issue is the shortened battery standby, but other than that I'm pretty happy with it!
eastwoodnet said:
Yes I am ，but i flash win10 2004 . and Improved heat dissipation，Now, the only issue is the shortened battery standby, but other than that I'm pretty happy with it!
Click to expand...
Click to collapse
I'm also willing to try Windows 10 2004, but a lightweight version because my Mi Pad 2 is the 16GB version. How did you install that on yours? With a USB dongle with USB stick and keyboard like a regular computer?
Also, how did you improve heat dissipation?
By the way, does anyone know if it's possible to desolder the eMMC and replace it with a high capacity one? Like 64 or 128GB?
I still use my Mi Pad 2, mainly for reading. But been looking into bringing up Android N to this tablet (there is at least one Intel Atom nougat kernel source available, which might come in handy) and also around 3-4 different tablets running Nougat on Intel Atom (so we can try to use those blobs). Bliss OS is an option as well (as per the guide(s) on this forum). One approach could be to assist the Bliss OS team in squashing the bugs for the Mi Pad 2. If you want to discuss this further, feel free to let me know.
Palm Trees said:
I still use my Mi Pad 2, mainly for reading. But been looking into bringing up Android N to this tablet (there is at least one Intel Atom nougat kernel source available, which might come in handy) and also around 3-4 different tablets running Nougat on Intel Atom (so we can try to use those blobs). Bliss OS is an option as well (as per the guide(s) on this forum). One approach could be to assist the Bliss OS team in squashing the bugs for the Mi Pad 2. If you want to discuss this further, feel free to let me know.
Click to expand...
Click to collapse
I'm a bit "desperate" to have a good OS available for this device because otherwise it's basically a paper weight for me. Stock MIUI was always flawed and slow and in my case Windows is pretty limited since I only have 16 gigs. And yeah, I'm available to discuss this further, it would be a pleasure.
joaocandeias said:
I'm a bit "desperate" to have a good OS available for this device because otherwise it's basically a paper weight for me. Stock MIUI was always flawed and slow and in my case Windows is pretty limited since I only have 16 gigs. And yeah, I'm available to discuss this further, it would be a pleasure.
Click to expand...
Click to collapse
Have you ever tried the AOSP rom (it's seems to be a developer rom from Xiaomi) for Mi Pad 2?
I'm currently using MIUI 9.6.2.0 Mod from LVware it's working fine.
The only Android N kernel source for Cherry Trail devices available is the Grandstream GXV3380 http://www.grandstream.com/support/resources/?title=GXV3380 (scroll down to GXV3380 GNU GPL). Grandstream writes its rom is Android 7 based, so the kernel source must be Nougat based (I only write this, because a Cherry Trail nougat source has never been released, so this is huge. I even think it is able to compile based on the archive contents). I only came by this by searching for Cherry Trail devices on Geekbench Browser. Would like to compare this kernel source to the Lollipop Mi Pad 2 one.
In terms of an Android Marshmallow Cherry Trail kernel source, I could only find the Panasonic Toughpad Android 6 (PANASONIC FZ-A2A): https://panasonic.net/cns/oss/tabletcomputer/FZB2D001.html .. It's worth mentioning that Amazon has made the Amazon Echo Show (2nd Gen) kernel source available as well (5.5.3.9-20200618.tar.bz2), but I think it's Lollipop based: https://www.amazon.com/gp/help/customer/display.html?ie=UTF8&nodeId=201626480 (scroll down to Echo Show (2nd Generation). The Nougat kernel source might be released, as the latest software version available is 655636620 (https://www.amazon.com/gp/help/customer/display.html?nodeId=201602210) and according to Wiki the 6.x.x.x builds are Nougat based. I know it's confusing, you can read more about it here: https://en.wikipedia.org/wiki/Fire_OS#cite_note-4
In terms of blobs, there are plenty of devices to borrow from. Medion has 4 tablets that have been updated from Lollipop -> Marshmallow -> Nougat. The same with Getac, which has two models the MX50 and the ZX70. Lenovo has a few Cherry Trail devices as well upgraded to Nougat, which can be borrowed from.
Palm Trees said:
Have you ever tried the AOSP rom (it's seems to be a developer rom from Xiaomi) for Mi Pad 2?
I'm currently using MIUI 9.6.2.0 Mod from LVware it's working fine.
The only Android N kernel source for Cherry Trail devices available is the Grandstream GXV3380 http://www.grandstream.com/support/resources/?title=GXV3380 (scroll down to GXV3380 GNU GPL). Grandstream writes its rom is Android 7 based, so the kernel source must be Nougat based (I only write this, because a Cherry Trail nougat source has never been released, so this is huge. I even think it is able to compile based on the archive contents). I only came by this by searching for Cherry Trail devices on Geekbench Browser. Would like to compare this kernel source to the Lollipop Mi Pad 2 one.
In terms of an Android Marshmallow Cherry Trail kernel source, I could only find the Panasonic Toughpad Android 6 (PANASONIC FZ-A2A): https://panasonic.net/cns/oss/tabletcomputer/FZB2D001.html .. It's worth mentioning that Amazon has made the Amazon Echo Show (2nd Gen) kernel source available as well (5.5.3.9-20200618.tar.bz2), but I think it's Lollipop based: https://www.amazon.com/gp/help/customer/display.html?ie=UTF8&nodeId=201626480 (scroll down to Echo Show (2nd Generation). The Nougat kernel source might be released, as the latest software version available is 655636620 (https://www.amazon.com/gp/help/customer/display.html?nodeId=201602210) and according to Wiki the 6.x.x.x builds are Nougat based. I know it's confusing, you can read more about it here: https://en.wikipedia.org/wiki/Fire_OS#cite_note-4
In terms of blobs, there are plenty of devices to borrow from. Medion has 4 tablets that have been updated from Lollipop -> Marshmallow -> Nougat. The same with Getac, which has two models the MX50 and the ZX70. Lenovo has a few Cherry Trail devices as well upgraded to Nougat, which can be borrowed from.
Click to expand...
Click to collapse
Yep, I've tried the AOSP ROM but it gets really slow after a bit. It's almost impossible to multitask because it can't handle more than 2 apps. Never heard about that MIUI ROM though, do you have a link for it? is it good?
About the sources i'll be completely honest. I have limited expertise on this subject but seeing all that makes me think that it's not that impossible to make a good ROM for our device (am i wrong?), so what's limiting us? People with knowledge? More sources? What's the next step?
eastwoodnet said:
but i flash win10 2004
Click to expand...
Click to collapse
does the touch keyboard move content up now?
hi my mipad 2 get error bootloader 03, and have option to press vol up to boot normal. after that, the mipad always turn off like drain battery but when I plug the charger is already full. can any one help me? thanks
Tr4sHCr4fT said:
does the touch keyboard move content up now?
Click to expand...
Click to collapse
holy ****ing **** I know exactly what you mean. windows 8 does it. windows 8 is great.
i've been messing with 8 on it, and it's literally orgasmicly good. 10 is still my main OS because some drivers are missing, but the whole of it works really well.
oh, and using gibson's inspectre.exe to disable spectre and meltdown protections was THE thing to finally get the performance that seemingly disappeared. thats because it did disappear! also seems to help with RAM usage enormously
and I cut the plastic insulator between the motherboard and the rear case. filled in the gap with a thermal pad pretty much right on the CPU. 2.24 GHz base clocks now baby!
and this CPU is around a 7W TDP for anyone wondering. intel says 2W SDP, I say 4W SDP is probably closer to reality. 2W is at the base 1.44 GHz tho, but mine is at 2.24 GHz all the time.
I still have my 2GB RAM 16GB internal MiPad2 and working with shortened battery life and some limited app functionality (G.Play doesn't work/update for eg).
I want to use it primarily as a book/manga reader as well as a media player of sorts.
I saw the recommended custom ROMs list here but any advice on which is ideal for this device based on its limited hardware?
Oni1315 said:
I still have my 2GB RAM 16GB internal MiPad2 and working with shortened battery life and some limited app functionality (G.Play doesn't work/update for eg).
I want to use it primarily as a book/manga reader as well as a media player of sorts.
I saw the recommended custom ROMs list here but any advice on which is ideal for this device based on its limited hardware?
Click to expand...
Click to collapse
i installed a light version of windows 10 on mine and it works surprising well. I have around 8gb to play with
That's cool! Performance is ok?
So would app installation then be via the Microsoft Store or can you still install via Google Play?
Are the instructions for the Windows 10 Lite flashing detailed somewhere on this forum?
joaocandeias said:
i installed a light version of windows 10 on mine and it works surprising well. I have around 8gb to play with
Click to expand...
Click to collapse
Hello,
can you really install Windows 10 on Mipad 2 2 / 16Gb based on Android?
I have a Mipad 2 2/64 based on Android, and I want to replace it with Windows 10, would you like to share the method with me?
I still use this little tablet as a second screen/device playing video's on the desk when im working on my laptop. The screen is still really nice: bright and crisp. Mine has Windows 10 installed which is barely useable, usually everything feels kinda slow, but it does work. The biggest problem was that it thermal throtteled after normal use, so what helps is if you do a cooling mod. It's not that hard, I cut a square out of the shroud thats covering the CPU and placed a thick thermal pad over the CPU so it touches the outer metal housing. This greatly improved CPU/GPU performance and solved the thermal issue. The housing doesn't even get that hot when you stress the tablet. It now plays video's no problem all day long, where it would stutter after while without the mod...
Don't expect any miracles though, it's still an Atom with a slow eMMC drive and only 2GB of RAM. Windows is just too heavy for it sometimes. A newer version of Android would probably be a better fit. What also helps is if you debloat Windows a little: https://github.com/W4RH4WK/Debloat-Windows-10
Oni1315 said:
That's cool! Performance is ok?
So would app installation then be via the Microsoft Store or can you still install via Google Play?
Are the instructions for the Windows 10 Lite flashing detailed somewhere on this forum?
Click to expand...
Click to collapse
Performance is fine i guess. I think it gave a new life to my Mi Pad 2 even though i haven't been using it lately. App instalation is via Microsoft Store of course, or via .exe installers just like a PC.
I'm wondering if it will be possible to install Windows 10X on it. That would be very cool.
As for the instructions, i used an old tutorial from the Xiaomi forums to change from Android to Windows and then I installed that Windows 10 lite from Ghostspectre using a USB stick just like a regular PC
Amin_foam said:
Hello,
can you really install Windows 10 on Mipad 2 2 / 16Gb based on Android?
I have a Mipad 2 2/64 based on Android, and I want to replace it with Windows 10, would you like to share the method with me?
Click to expand...
Click to collapse
That's right, my 2/16 Mi Pad 2 is running Windows 10.
I found the link for the tutorial. Sadly it's offline, but Wayback Machine can open it just fine, except the pictures. Surprisingly, the download link is still online too but it's pretty big (7 gigs).
If anyone needs that, i can send the two links through PM