Windows 11 Install Solution / Fix for TPM, Secure Boot, and Ram / Drivers

Windows 11 Install Solution / Fix for TPM, Secure Boot, and Ram / Drivers - Windows 11

Step by Step Guide to Install Windows 11+Bypass TPM 2.0, Secure Boot, and Ram Check
Hello everyone! This guide will explain how you can get a copy of Windows 11 Insider Preview without having to deal with enrolling your Microsoft account via the Windows Insider Program! This is a UUP dump copy of Windows 11 ISO file. You do not need to have a Activated Windows 10 copy to do this! There is a lot of debate and speculation going around dealing with Windows 11 not running on a older PC without TPM 2.0, Secure boot, and 4GB ram. This method / fix is a registry edit that injects bypass code that will overlook TPM, Ram, and Secure Boot into the registry " IF " you get the infamous "Windows 11 cannot be installed on this PC" . This is a temporary fix and I assume this will be patched upon first non-developer release of windows 11 arrives! If you want to use this guide to just get a stand alone copy of Windows 11, go ahead.
How do I get the copy of Windows 11?
1. Open your favorite browser and navigate to
( www.uupdump.net )
2. Click on Dev Channel.
3. Find ( Windows 11 Insider Preview 10.0.22000..51 (co_release) amd64 ) and click the link.
4. Pick your Language.
5. Choose the version of Windows 11 you want to download and DE-select the other versions.
6. On the next page, go ahead and click " Create Download Package "
7. Open the file after it has finished downloading.
8. Open a NEW folder and Navigate to the Local Disk C Folder.
9. Once you are inside Local Disk C, create a NEW folder and name it ( Win11 )
10. Open up the file you downloaded from uupdump again and copy and paste all the files to the brand new folder you created inside the C directory.
11. Run the Windows Command File named ( uup_download_windows )
12. Congrats! Windows 11 is now downloading.... This will take a little bit of time
13. Once the command prompt is done downloading and compiling, you will be prompted to close the command prompt... The Windows 11 ISO file will now be inside the folder you created inside the C Directory.!
Click to expand...
Click to collapse
Now that you have yourself a copy of Windows 11, we can now explore the different options of installing. You can actually take the ISO file and mount it to your PC and install Windows 11 right from your Desktop, you can choose the route of using a USB Drive to install, or you can use a CD but lets be honest.. a CD?
Method #1 USB 8GB / Clean Install
1. Grab another device such as a phone, tablet, or another PC and bring this guide up on that device.
2. Shut Down your PC and boot into your BIOS.
3. Load Setup Defaults and Exit Saving Changes. ( You might have to thumb around for a minute to find some of these options in future steps ).
4. Your PC will restart and Boot into BIOS again.
5. If you have option to Enable TPM, do it. If you don't have this option, do not worry. Continue to the next step...
6. Set the boot mode to UEFI. If you have option for both UEFI and LEGACY, choose UEFI.
7. Enable Secure Boot if you have the option.. If you don't have the ability to change, don't worry. Continue to the next step...
8. Exit BIOS and save changes. Your PC will boot up to OS now.
9. Open your browser and navigate to https://rufus.ie and download.
10. Plug in your USB Drive and open Rufus.
11. Inside Rufus, select your USB drive you want to use for installing Windows 11 and then find the Windows 11 ISO file that you downloaded and let Rufus create the install drive..!
12. Keep your USB Drive plugged into your PC and turn off the power then boot into BIOS again.
13. Find the Boot Menu inside of your BIOS and select the USB drive to boot first.
14. You should boot to the Windows Installer now. Choose your Language and continue.
15. Select " I don't have product key " and continue.
OK, so If you made it to this point and you are faced with the message of " Windows 11 cant be installed on this computer " don't freak. This portion of the guide is only for the people who are stuck with the message above.. If you don't see this message, continue to step #16 please..!
How do I Bypass the Windows 11 TPM 2.0, Ram, and Secure Boot check?
1. Open the Command Prompt by pressing SHIFT and F10 Key at the same time..
2. Now type " Notepad " inside of the CMD and press enter.
3. Now copy and paste or type out the following text once the notepad loads in...
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\Setup\LabConfig]
"BypassTPMCheck"=dword:00000001
"BypassSecureBootCheck"=dword:00000001
4. Now, click on file at the top left and select save as and click on This PC and find the USB drive or any other internal drive and make sure to click save as type (all files) at the bottom of the window and name the file
" Bypass TPM, Secure Boot & RAM Check.reg " then click on save.
( When you save this file, make sure you are able to access again. I don't care where you save it but it needs to be accessible )
5. Once you saved, click on file again, click on This PC, and browse to the registry file you just created. Once you are in the directory where the registry file was saved, find the drop down menu at the bottom and select All Files again and you will see the newly created Bypass registry file you created.
6. Right click on the Bypass Registry file and choose the " Merge " option and click OK on the following prompts then close all the windows except the install window. Click the back arrow button inside the install window, and continue the setup from step #15 please.
16. Select Windows Version you want and click next.
17. Accept the EULA and continue... Now you select Custom Install and you will see all of your drives on your computer. With this being a clean install, we will want to delete each drive partitions ( Make sure you double check what you are deleting and understand whats happening ), then click on Unallocated space and click next.
18. Now, Windows 11 will install and you go about your way!
Click to expand...
Click to collapse
Method #2 : Install inside of Windows 10 OS
1. Make sure you already have followed the steps to download a copy of Windows 11 before we continue.
2. Right click on the Windows 11 ISO file inside of the ( Win11 ) folder and click mount.
3. Navigate to This PC and you will see a DVD Drive named ( CPRA_X64FRE_EN-US_DV5 ) . This is the Windows 11 ISO file mounted to your system now.
4. Open up the Local Disk C directory and create a new folder named ( Win11Install )
5. Go back to where the ( CPRA_X64FRE_EN-US_DV5 ) mounted drive is, right click, and open the folder. Copy and paste all files into the new ( Win11Install ) folder you created inside of the Local Disk C directory.
6. Once the files are done copying into the ( Win11Install ) folder, open the folder, right click setup.exe, and run as administrator.
7. Installer will open, It will say " Checking for Update & Checking your PC "
Intermission
Some of you will slide through with no issues and others will be faced with
" Windows 11 can't be installed on this PC "
If you receive this message, the installer will tell you what you are missing
TPM 2.0, Secure Boot, or RAM Requirements
If you don't see this message, continue onto step #8 please...
My computer is telling me I don't meet the requirements!
What do I do?1. Open your browser and go to the following link. MEGA Download Link
2. Once downloaded, find the file, extract to your desktop or wherever you like.
3. Open the ( Win11Install ) folder located inside the Local Disk C directory, find the sources folder and open that.
4. Once you are inside the sources folder, you will need to replace the old " appraiserres.dll " with the new one you just downloaded.
5. Copy the new .dll file and paste into the sources folder. You will get a message asking to replace and replace file in destination.
6. Close all folder and right click on Desktop and refresh the system.
7. Open up folder and navigate to This PC and EJECT the Windows 11 ISO file.
8. Now open Local Disk C directory and navigate once more to the ( Win11Install ) folder, open, and right click setup.exe & run as administrator.
8. Continue to follow the installer and Install!! Everything is straight forward from here as long as you know how to use a PC
Click to expand...
Click to collapse
Windows 11 Drivers
1. Navigate to setting and select Update and Security.
2. Click on check for updates
3. Look under where the pending update are and you will see the option to view addition updates... Click..
4. There will be an arrow point towards Driver Updates.. Click...
5. Choose all the drivers you want to update, let them download, and restart your pc.Cheers
Click to expand...
Click to collapse
One more thing to keep in mind everyone...Windows 11 is obviously in Developer mode and Microsoft will be pushing these cumulative updates out frequently. Hopefully we will be getting a new solid build soon and I will adjust the means of upgrading to them if needed.For now, these are the 2 best ways to use Windows 11 if you don't choose to enroll in the Windows Insider Program, don't have a genuine copy of Windows 10, and/or your PC doesn't meet the new" Requirements" for TPM 2.0, Ram Check, and Secure Boot Microsoft has laid upon everyone...
Good Day

R U damn sure that Windows 11 being installed this way will be fast on PC's with less than 4GB of ram?

Finally! Installed without issue. My machine meet all the requirements except for the cpu, which is a intel 6th gen.

WZ_DroidMaster said:
R U damn sure that Windows 11 being installed this way will be fast on PC's with less than 4GB of ram?
Click to expand...
Click to collapse
OK so I can't promise it will be buttery smooth...
This is a developer build and there is more updates to come soon!
This method will ensure you can run the OS thanks to the registry edit
Let me know how it runs

UncolourTV said:
Finally! Installed without issue. My machine meet all the requirements except for the cpu, which is a intel 6th gen.
Click to expand...
Click to collapse
Glad to hear. I will be updating this post with new methods and different ways to install Windows 11 also

UncolourTV said:
Finally! Installed without issue. My machine meet all the requirements except for the cpu, which is a intel 6th gen.
Click to expand...
Click to collapse
I asked this question, bcoz I m running windows 10 on a first gen core i3 330M, and had a doubt whether it cud handle windows 11 or not

WZ_DroidMaster said:
I asked this question, bcoz I m running windows 10 on a first gen core i3 330M, and had a doubt whether it cud handle windows 11 or not
Click to expand...
Click to collapse
I understand what you mean..
Depending on how big of a HDD you have, I could make a step by step guide on how to dual boot Win10 and Win11 if you want to try it out. And another thing is that Windows 11 is in Developer Mode now so there will be things that don't seem as good and polished quite yet
You can run it no problem but I cant promise you it will be everything you hope a dream about

What about the beta build released hours ago?

BitcoinMineAds said:
What about the beta build released hours ago?
Click to expand...
Click to collapse
I need to update this. This was posted when the windows 11 build was leaked

Install at window 11 because I need them more flexible work and advance because I am running a beauty salon so that's why I need a best features best colours and best camera also so that's why I am shoes in window 11 and system change call operation of of

Nameless Foe said:
OK so I can't promise it will be buttery smooth...
This is a developer build and there is more updates to come soon!
This method will ensure you can run the OS thanks to the registry edit
Let me know how it runs
Click to expand...
Click to collapse
I got the message this pc can’t run Windows 11. Said not the right processor. No TPM. No legacy boot. Wrong motherboard. I am using SDD drive for Windows. I know this can cause installation issues with Windows. Usually there is a serial boot driver for Windows.Swapped with the Mega file. Then followed the steps given. Message was gone. Windows installer completed the check up then asked how to install. I chose to keep all files and apps. The install began. After a few seconds pop up said install failed. Progress never changed. Stayed at 0. Is there an explanation for this?

win Health check says i cant run win 11, but when i go to system - about this is what i see.
Edition Windows 11 Home
Version 21H2
Installed on ‎06/‎30/‎2021
OS build 22000.258
Experience Windows Feature Experience Pack 1000.22000.258.0
Im totally at a loss. 2600k on a H70 PP, 16 gb ram, evga gtx1060 6gb which they say won't run it, but proof is in the pudding. It runs fine better than 10 did for sure.

Related

Step By Step: Unbrick Your Hermes

This tutorial is for who have problem No GSM, device hangs on startup or black screen after startup animation. Just follow the procedure;
1. Download Visual Studio 2005 and Microsoft Windows CE 6.0 Embedded.
2. Click setup.exe and choose to install Visual Studio 2005 Professinal.
3. Now install Microsoft Winows Embedded CE 6.0
4. Disable USB connection in Microsoft Active Sync.
5. Open Visual Studio 2005, first time it will ask for default environment, select Visual C++.
6. Select File > New > Project
7. Select Platform Builder for CE 6.0, click OK.
8. Design Wizard will come up. Click Next
9. Select Device Emulator: ARMV4I, Click Next.
10. Select Custome Device, click Next.
11. Now Click next, next , next .... , leave all the boxes blank and finish the wizard.
12. Click Build > Copy files to release Directory
13. Again Click Build > Make Run-Time Image
14. Click Build > Open Release Directory in Build Window
now notice the path (its like C:\WINCE600\OSDEsigns\OSDesign1\OSDesign1\ReDir\DeviceEmulator_ARMV4I_Debug) and open the folder manually from Windows Explorer.
15. Copy nk.bin , ril.dll , rilgsm.dll , serial_cmd.dll , stk_service.dll to that folder (see attachment for the dll's and bin)
16. Now go to Target > Connectivity Options and set like below
Download=Emulator (set to 256MB)
Transport=Usb
Debug=None
17. Now open your phone in KITL mode (COM MANAGER + POWER) and attach to PC USB.
18. Click Target > Attach Device
Process will start, wait around 2-3 min and you will see your device run up (do calibration if need but don't remove USB cable)
19. I tell you again don't remove usb cable at this stage, otherwise your device will hang up and you have to do the whole process again.
20. Now copy SSPL_HERM.exe in a MMC and insert that to device, go to File Explorer and execute that. Device will go to tri-color boot screen.
21. Now Flash RUU_Radinly_1.27.00.00.exe, it will take some minutes so be patient.
Your phone is unbricked.

this procedure is also for No GSM, but the device run the OS, but when i try to update only GSM radio ROM it stucks on 0%.. i think not!??!

What about no GPRS
Is there a possibility this could fix a problem where i can make phonecalls ok but cannot connect to gprs/3g/edge? (i have posted about this recently.):
http://forum.xda-developers.com/showthread.php?t=611014

very usefull this new guide since win ce 5 not avaible anymore on microsoft site. thx for your work

can't make it KITL mode (COM MANAGER + POWER)
any screen shuts or other help pls. thx
in bootmode or windows splash screen the result is the same: "invalid or missing ROM".
I waited at list 15 min each time

Which button is com manager ?
Thanx !

Please tell me which button is com manager !
Thanx !

See right side, in the middle.

13. Again Click Build > Make Run-Time Image
receive an error when making img. !
can't pass this point. Any help!!!

i can't download Windows CE 6.0 Embedded. who can share link for me? please!!!
thanks!!!!!

you know wich ...
you know wich rom have KITL?...

Request
It would be a great Help if you could upload the Run-Time image that is made in step 13.
13. Again Click Build > Make Run-Time Image
Click to expand...
Click to collapse
I am having problems with this step.

HKC p771a 7 inch Tablet Root

I have used many different methods to root phones even a few tablets for friends. But I have bought a HKC 7 inch tab from walmart. Great starter tablet by the way. I have found no information what so ever on any forum about this model. It has decent processor power and runs rather smooth. Alas there is no way to root this thing to reach its full potential. I checked around on the net and found nothing, none of the one click apps work on this model. Adb does not recognize the tablet either. I've put in the tablet ID into the adb_usb.ini still no device found. I'm not looking for anyone to just hand me the root process on a silver plater, though that would be nice, but any help moving me in the right direction would be appreciated.

I rooted one of these for a friend at work,
sourceforge.net/projects/androidroot/ is the root that I got to work.
and I've attached the driver that the manufacturer provided me when I requested a driver for development purposes.View attachment Rockusb.rar
Here is how I got it rooted
1. Installed Java JDK and Android SDK.
2. downloaded and extracted Manufacturer driver from Rockusb.rar and right clicked on the .inf file and selected install.
3. Opened Android SDK manager, installed Android SDK for version of tablet, and SDK tools, and Google usb driver from extras.
4. Enabled usb debugging mode on the tablet, and enabled unsigned apps to be installed.
5. Connected the tablet via USB
6. when the tablet shows up in the device manager as P771A I selected to update the driver manually, and selected the google USB driver from the android SDK.
7. Downloaded and extracted the android root I listed above.
8. Run android root and when it says "press any key to continue" it is waiting until the device connects to the computer again, as it could be rebooting, and one time when the tablet reboots, there is no text, just a black screen, but it does eventually connect and you can continue.
Also. I extracted the root to my desktop. when I ran as admin, it did not work, because the files were not on the administrators desktop, only mine, so it might be a good idea to extract the root to C:\ drive, so if you need to use admin, it won't fail
hope this helps
-Brandon

New approach
Ok I cannot get the drivers to install on my computer. Window 7 seems to default to its own driver and will not let me install the rockusb drivers.
With that said, I have the system Update.img and was wandering if the img itself can be rooted and then updated to the tablet. If this is possible and anyone with the knowledge is willing I will upload it. Or if someone is really patient and would like to walk me through the process and I will attempt to do this myself

No Help
So with no help I assume this is dead. I have a usb driver package with an .inf file a .sys file and a .cat file but this will not install on my computer thus leaving without a clue and no help. Have seached for a way to force install this driver command line install right click and install the inf. Nothing works so if someone wants to throw me a bone, thanks, if not I guess this thread is dead.

tannerjames said:
So with no help I assume this is dead. I have a usb driver package with an .inf file a .sys file and a .cat file but this will not install on my computer thus leaving without a clue and no help. Have seached for a way to force install this driver command line install right click and install the inf. Nothing works so if someone wants to throw me a bone, thanks, if not I guess this thread is dead.
Click to expand...
Click to collapse
Can't tell your level of PC knowledge so if you already know this don't get offended. The .inf is editable and there are areas in there that allow manufacturers to prevent installation on some OS's to prevent conflicts. Make a system restore point or better yet a backup and then post the contents of the INF somewhere and point the folks here to it and they may be able to help you edit it to install. Regardless, you'll have to use the "have disk" option instead of letting windows search for a driver even if you get the edits right. And the usual disclaimers about me not being responsible for any issues with your equipment as a result of this are in effect.

tannerjames said:
So with no help I assume this is dead. I have a usb driver package with an .inf file a .sys file and a .cat file but this will not install on my computer thus leaving without a clue and no help. Have seached for a way to force install this driver command line install right click and install the inf. Nothing works so if someone wants to throw me a bone, thanks, if not I guess this thread is dead.
Click to expand...
Click to collapse
I was able to root using the instructions above although i don't think you need the rockusb drivers. You just need the usb drivers that come with the android sdk. I am on Win 7. Thanks for the above info for rooting.
I was able to install ROM manager and now proceeding to backup ROM and upgrade using this guide: cant post link as forum is preventing, but search for rom flash guide on androidpolice com.
Hope this helps.
Big thanks to this thread to get me going...!!!

?
could someone please, Barney style, Explain how I am supposed to select the android_winusb.inf because my steps are as follows. Right click on device p771a in device manager, browse my computer, let me pick from a list of device drivers, have disk, point to the google usb driver (C:/Android/android-sdk/extras/google/usb_driver) select the android_winusb.inf open. Hit ok, (The folder you specified doesn't contain a compatible software driver for you device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems). Hope this helps explain my troubles. Glad that my thread is helping others to root this device but it does not work for me.

Could it really be that simple?
Found in another forum about the nexus 7 when connected to the pc there is a presistent notification that allows you to change the connection type from mpt to camera which will give you adb access and the tool from this thread works great. Thanks for the help guys, got my root on

tannerjames said:
Found in another forum about the nexus 7 when connected to the pc there is a presistent notification that allows you to change the connection type from mpt to camera which will give you adb access and the tool from this thread works great. Thanks for the help guys, got my root on
Click to expand...
Click to collapse
Glad you could figure it out...
I was not able to use the ROM Manager to backup the ROM since the device is not supported on this tool, but see below for how you can obtain the stock image.
I've tried to flash multiple different ROMs using RKAndroid to the tablet, spending days on this, with no success. The tool itself works great and I am able to flash the ROMs since it supports the RK29 chipset which I believe this tablet has. The stock ROM for this device is available from the manufacturers web site (the link is available when you go to Settings => About Device => System Update, hkcdigital dot com slash update slash update.img), if anyone would like to take the stock rom and upgrade it to Android 4.2/JB.
I was able to unpack/repack the stock image using the wendal image tools and modify / cook the ROM using Android kitchen method described elsewhere in this forum. Rockchip Batch Tool is another great utility to flash custom ROMs to this device. Also, If you put the ROM as update.zip or update.img file on the microSD card, the tablet will take it and flash the image as long as it is in the right format. Ofcourse you can put the tablet into recovery and restore from there as well. I've found that the stock image (update.img) has the following file/folder format when unpacked: /RK29xxLoader(L)_V2.27.bin, /package-file, /parameter, /recover-script, /update-script, /Image/boot.img, /Image/system.img, /Image/recovery.img and /Image/misc.img.
Is it possible to upgrade this tablet to Android 4.2 or atleast Jelly Bean? Would be very helpful if someone is able to do this. The most success I've had so far is with the custom ROM Oma_Odys_Loox_JB_4.1.1_v1.2.2a flashed using RKAndroid. It flashed the tablet fine, updated the boot etc. On tablet boot I am able to see the new logo, but then the it doesn't go anywhere from there. I think customizing this ROM or the stock ROM we should be able to get the new OS on to the HKC tablet. I've given up for now since I don't have the time to spend on this anymore. If someone is able to do this, please post the instructions or upload the custom ROM, as I am sure it will benefit a lot of people and will be much appreciated. Happy cooking!
Thanks!

jawadshaik- rom manager
If you have successfully flashed rom manager on this device could you post the steps you took to do so. What version? Manual flash? The program itself says there is no recovery for this device.

Sorry jumped the gun on that last post. Thanks for the info

What's the secret to keeping the battery from draining so quickly while it's idle? I just got this and see it drained about 40% in about 2 hours I think and I wasn't using it.
tannerjames said:
I have used many different methods to root phones even a few tablets for friends. But I have bought a HKC 7 inch tab from walmart. Great starter tablet by the way. I have found no information what so ever on any forum about this model. It has decent processor power and runs rather smooth. Alas there is no way to root this thing to reach its full potential. I checked around on the net and found nothing, none of the one click apps work on this model. Adb does not recognize the tablet either. I've put in the tablet ID into the adb_usb.ini still no device found. I'm not looking for anyone to just hand me the root process on a silver plater, though that would be nice, but any help moving me in the right direction would be appreciated.
Click to expand...
Click to collapse

@jawadshaik
Just out of curiosity, when you were flashing that Rom that brought up the boot screen, did you do a wipe/factory reset from recovery mode before flashing? I have no idea if that would help or not, but most if not all roms require a data wipe before flashing... Just curious if you had tried this as I have heard of this happening on other devices because a data wipe wasn't done first. Might be worth a shot if you haven't tried it already, just a thought
Sent from my Huawei u8651s using xda app-developers app

Krytical said:
I rooted one of these for a friend at work,
sourceforge.net/projects/androidroot/ is the root that I got to work.
and I've attached the driver that the manufacturer provided me when I requested a driver for development purposes.View attachment 1468367
Here is how I got it rooted
1. Installed Java JDK and Android SDK.
2. downloaded and extracted Manufacturer driver from Rockusb.rar and right clicked on the .inf file and selected install.
3. Opened Android SDK manager, installed Android SDK for version of tablet, and SDK tools, and Google usb driver from extras.
4. Enabled usb debugging mode on the tablet, and enabled unsigned apps to be installed.
5. Connected the tablet via USB
6. when the tablet shows up in the device manager as P771A I selected to update the driver manually, and selected the google USB driver from the android SDK.
7. Downloaded and extracted the android root I listed above.
8. Run android root and when it says "press any key to continue" it is waiting until the device connects to the computer again, as it could be rebooting, and one time when the tablet reboots, there is no text, just a black screen, but it does eventually connect and you can continue.
Also. I extracted the root to my desktop. when I ran as admin, it did not work, because the files were not on the administrators desktop, only mine, so it might be a good idea to extract the root to C:\ drive, so if you need to use admin, it won't fail
hope this helps
-Brandon
Click to expand...
Click to collapse
So after doing working on this a while, I've finally figured it out. Here are some caveats:
1. You can't do this on a Mac or Linux box. Don't ask me why, you just cant.
2. You have to turn on USB debugging, change the Security to allow Unknown sources and MOST IMPORTANT: when you plug it in, you have to change it to "Connected as a Camera". Putting it in storage mode doesn't work!
HOW TO INSTALL THE PROPER DRIVER & ROOT THE DEVICE:
1. Follow the steps quoted above and download the Google Android SDK, and the Java JDK (from oracle.com/java).
2. When you first plug it in (use the USB plug labeled USB not the HOST one), it complains and will discover a P771A device. When it does, right click on your computer, choose Manage my computer, go to the device manager and then right click on the P771A device. Click "Update Device Driver". Choose "Browse my computer for Driver software". Then choose, "Let me pick from a list of drivers on my computer". Browse to the \adt-bundle-windows-x86_64\sdk\extras\google\usb_driver folder which you would have if you had downloaded and installed the Google Android SDK. A list of 3 drivers will appear when you click OK. CHOOSE THE "ANDROID BOOTLOADER INTERFACE" as the driver. None of the others work.
3. Run the root script batch file mentioned above which can be found here at: sourceforge.net/projects/androidroot
4. The root script isn't really great at explaining so I'll try. When you first run it, make sure your device is unlocked and on the home screen.
5. The first thing it will do is reboot your machine. Don't press enter until your machine comes back up.
6. After your machine boots unlock it and then press Enter again. Your machine will reboot. This time it won't seem to come up but the backlight will remain on.
7. Wait about 30-45 seconds then press enter again. You should get: uid=0(root) gid=0(root) in the command prompt window.
8. Press Enter. You should get:
remount succeeded
727 KB/s (22364 bytes in 0.030s)
Removing changes except ROOT...
Installing superuser...
2288 KB/s (843503 bytes in 0.360s)
9. After about 30-60 seconds, your device should reboot. You'll see a box briefly saying "Android is Upgrading" and you'll arrive at the lock screen. Press Enter to exit the command prompt.
Your device is now rooted and you should see "SuperUser" installed. I promptly installed "root uninstaller" to get rid of Facebook, Skype, and Youtube which my little kids don't need access to. This device doesn't have a bootloader or recovery mode so rooting it doesn't get you much besides the ability to uninstall the system software. Have fun.

This may help someone but on step 2 of the guide on the second page, after you right click your device and go to "Let me pick from a list of drivers on my computer". You then click "Show All Devices" then "Have Disk..." Direct it to the root of the adt-bundle folder you downloaded then you can select from the three drivers. I'm on windows 7 32bit and the drivers didn't show up for me like how it was suppose to..

I also could NOT get any of the drivers in the "manufacturer USB" packet to install... I WAS able to install the google drivers, but that also would not allow ADB to see the device... So still stuck with everyone else...

P771A possible problem
I'm having a similar problem where the USB driver downloaded through Android SDK's -> Extras -> Google USB Driver, tells me that the file contains no information about my device. I noticed in the Sources of SDK, there wasn't an API for 4.0.4, only 4.0.3 then 4.1, so i downloaded 4.0.3 repo.
============================================
my devices is on 4.0.4, and my Kernal is as follows:
3.0.8+
[email protected] #8
Wed Aug 29 09:59:19 PDT 2012
Build Number:
P771A-user 4.0.4 IMM76D user.v402.007 release-keys
============================================
I've also made sure weather Unknown Sources is on, as well as USB debugging.
Might the Kernal be the problem? Also, does it matter weather its MTP or CTP?

Now HKC is telling me that they don't support the ability to jail break their devices
Sent from my P771A using xda app-developers app

Help with Rooting Zoostorm SL8 mini.

Hello could anyone please help me with rooting my zoostorm sl8 mini running ICS. I just don't know which rooting program to use and with one will work. I have search the web now for days and cant find anything.
Please Help!
Thanks:good:

Use the Qemu exploit
This can device can be rooted using DoomLords Xperia script. I have ported the script to linux as well for Ubuntu users,
The original script is here : http://forum.xda-developers.com/showthread.php?t=1601038
I haven't tested the Windows script, but I assume it will work as I haven't changed anything, the Linux script has been fully tested and I have successfully rooted the sl8 mini using it.
For Windows see below:
1) Download the attached zip file and Super1Click zip file ( http://download.cnet.com/SuperOneClick/3000-2094_4-75447027.html ).
2) Unzip the zip files into a new folders (you can use 7-zip for this : http://www.7-zip.org/)
3) Power on the Zoostorm Sl8 Mini and boot it normally.
4) Go into settings, developer options and tick USB debugging
5) Go to settings, security and tick Allow installtion of non-Market Apps
6) Connect the table to the PC with a USB cable.
7) When the new Hardware Found Wizard find the Android device and can't find a driver, select install from speficic location and browse to drivers folder under the folder you just unzipped the Super1click file to.
8) The driver should install from here and will show as an Acer Android device.
9) If Windows complains about the driver not being signed tell it to continue anyway.
10) Reboot the Windows PC if requested by the Hardware installation Wizard.
11) Discconect and replug the USB cable.
12) Open a windows command prompt
13) Navigate to the folder where the unzipped rootsl8mini.zip files are.
14) type runme.bat
15) Read the blurb on the screen and press any key to root your tablet.
16) The Sl8 mini will reboot several times, after it has reboot for the last time your sl8 mini will now be rooted.
For Linux (Ubuntu Precise Pangolin)
1) Install Android SDK, make sure the folder where adb is located is in your shell path variable. See link for Ubuntu instructions (http://www.liberiangeek.net/2012/07...-androidsdk-in-ubuntu-12-04-precise-pangolin/)
2) Download the attached rootsl8mini.zip file and unzip it into a folder.
3) Go into the folder where you unzipped the file and make the runme.bat.sh file executable. (Myhost:$ chmod 777 runme.bat.sh)
4) Power on the Zoostorm Sl8 Mini and boot it normally.
5) Go into settings, developer options and tick USB debugging
6) Go to settings, security and tick Allow installtion of non-Market Apps
7) Connect the tablet to the PC with the USB cable.
8) Execute the runme.bat.sh script (Myhost:$ ./runme.bat.sh)
9) Read the blurb on the screen and press any key to root your tablet.
10) The Sl8 mini will reboot several times, after it has reboot for the last time your sl8 mini will now be rooted.
Enjoy

Thank you, do I go to unzipped file using command prompt?
Thanks

I have tried to root the tablet and it wont install the drivers, it keeps saying that the file is corrupted or missing.
I'am running windows 8 64.
any suggestion's why it is doing this?
Many thanks :good:

I`m a noob to the Zoostorm. Are there any JB / CM10 ports for it?
Are they known as another name elsewhere in this forum?
Can anyone shed any light on this? Fantastic write-up by mikel by the way. Will test as soon as the mother-in-law gets hers for xmas from us!

Superb MIKEL543 i have done it, thank you so much, it took me a bit to figure it out but i managed to do it YAY..lol.
Now the problem is i cant watch and films from google play or flixster as it say that it cant because my Tablet is rooted .
i have tried everything and cant get it to work! :good:

easy way to root : http://zoostormsl8.blogspot.co.uk/2013/02/root-zoostorm-sl8-mini-3310-9506.html
download and update the zip

Bought this tablet as a gift for my father and assumed that connecting it to a usb keyboard would be straightforward (yeap android noob ) . My question is , is that even possible? Is there a custom rom that can be installed, I presume after rooting the device that enables usb host mode?

Fastboot and flashmode for win 8.1

Hi all
decide to make a new thread for this after having a search in XDA but couldn't find. so i dont think this is a double post. if otherwise tell me then i will remove this
most of all i want to spread this to most people since its known fact that many people looking for this solution for long time including me until today
originally this was reported by @n70shan. so full credit has to go to him.
Things u need
=================
1. windows 8.1 installed pc of course . with flashtool and drivers installed.
2 little file called Take ownership
3 usb files form WIN 8
for x86 system
for x64 sysem
go to C > windows > System32 > drivers and copy and save usbhub.sys and usbport.sys in some location just in case if this didnt work for you. you can replace them back and have the PC going without any issue if something goes wrong . which is highly unlikely
install InstallTakeOwnership.reg from the take ownership zip.
go to C > windows > System32 > drivers
right click and select take ownership for the 2 usb files ( usbhub.sys and usbport.sys )
copy paste from the given usb files to your pc and replace the current
reboot
now you should have fastboot and flashmode without any issue in your Win 8.1
pls fell free to post if any issues. and help other members as u can

http://forum.xda-developers.com/showthread.php?t=2635830
FlashTool Xperia Driver Pack by DooMLoRD

Remix OS won't boot

Remix won't boot on my PC. I get an Error 15 and that's it any ideas?
AMD A10-6800 with Radeon HD graphics 4.40 ghz
8 gb Ram
Windows 10 64bit
Thanks for any help

That is bootloader related. I have it on my sister's Asus but I managed to fix it.
First extract all of the ISOs contents to the root of your windows partition, or any partition. Remember the ROOT of a partition don't add them to any subfolders. Make sure that system.sfs and kernel are in the root of the partition.
2) Download EasyBCD in windows "google it"
3) Put the iso file itself in the root of the partition as well and rename it to Remix.iso
4) Open EasyBCD - - > Add new Entry - - > go down and select iso tab. Select the iso file remix.iso and press add entry.
5) Reboot and select Neosmart iso or whatever you renamed it in the Windows boot menu. It will boot you to the iso. Select resident mode. And press enter.
I hope this helps.

@mdgraphix
I need little bit more information before I help you.
1. Did you use the official installer?
2. Did you install from Windows or from USB?
3. Please make a picture of your screen when the error 15 occurs or write down what's on the screen before the error.
Sent from mobile

Better Mobile App

welcome