Related
MIUI 10 POCO F1 version ported GSI
Tested and Booted on Moto G5 Plus.
Known bugs:
None known.
Download: https://drive.google.com/file/d/1ieURSFeSfdVzSFbFm4e5MkEajOsVsrOZ/view?usp=sharing
FP fix: https://drive.google.com/file/d/1DPbk24Ni8fI1RmjyQGYCIFN7C_HXxNK8/view?usp=drivesdk
MIUI 10 Treble wich vendor: https://androidfilehost.com/?fid=11410932744536981720
Installation:
1. extract the zip and put the ROM file in the TWRP backup folder (leave the Patchs in the internal memory or card)
2- go to TWRP and wipe system, date, cache and cache / davilk
3- install MIUI 10 Treble which vendor
4- Data wipe, davilk cache and cache
5- Restore the MIUI 10 POCO Backup System
6 - go to mount and select system and vendor
7- install patch 1
8- install patch 2
9- install magisk (required to boot)
10- Flash the FP fix
11- start the ROM
Note: anyone who has already used MIUI on their device before and has logged in to the MI account when they use it will have to log in again at the first boot and need internet for this.
Fingerprint works
You have to install stock nougat firmware
Kudos man,
Please keep bringing good stuff like this to Moto G5 Plus, u guys keep our old device alive and lovable.
:good:
Any screenshot?
Fingerprint fix -> https://drive.google.com/file/d/1DPbk24Ni8fI1RmjyQGYCIFN7C_HXxNK8/view?usp=drivesdk
this is the same rom MIUI 10 that was previously posted, you think that this patch could solve the problem I had with the continuous error of the com.android.phone process
g5+ xt1680 2gb/32gb
I'm just asking, in case you don't know, I'll just have the option to install it.
What a wonderful job!
Friend that rom should use as base oreo or nougat
Can you give credits for all the fixes lol?
maybe it's a stupid question but I'll do it anyway: there's an update available, can I download and install it? btw thank you so much for the ROM
vsluthi said:
Friend that rom should use as base oreo or nougat
Click to expand...
Click to collapse
Nougat, but anyone who is in rom based on oreo does not need to install the nougat firmware, it is already inserted in the FP fix, install only the fix of NFC
neemiaxx said:
maybe it's a stupid question but I'll do it anyway: there's an update available, can I download and install it? btw thank you so much for the ROM
Click to expand...
Click to collapse
Not install the update, or causes soft brick or hard brick
I got stuck in active MiUi asking for MiUi account password.
What to do plezz help!!
Sandip69 said:
I got stuck in active MiUi asking for MiUi account password.
What to do plezz help!!
Click to expand...
Click to collapse
if you have already used MIUI 10 or MIUI 9.6 on your device and have logged in with some IM account connect to a wi-fi and enter the password for this same account, for some reason the system acknowledges that you have already used an MI account before and security measure prompts you to log in, if you can not resolve try formatting the internal memory
Friend's I have been stuck on boot animation anyone plzzz help
[email protected] said:
Friend's I have been stuck on boot animation anyone plzzz help
Click to expand...
Click to collapse
You has flashed magisk?
Manovips said:
if you have already used MIUI 10 or MIUI 9.6 on your device and have logged in with some IM account connect to a wi-fi and enter the password for this same account, for some reason the system acknowledges that you have already used an MI account before and security measure prompts you to log in, if you can not resolve try formatting the internal memory
Click to expand...
Click to collapse
Yes I have tried after clearing the internal storage but still I get that notification of unlock the device using mi password ?
Manovips said:
You has flashed magisk?
Click to expand...
Click to collapse
Yaaa I have flashed that will u tell me how much time it takes to first boot
There is no such options of forgot password ?
Sandip69 said:
There is no such options of forgot password
Click to expand...
Click to collapse
Can you post screen shot of that so we can analyse it
And I have another question how much time it takes for your first boot
At first it got stuck At the Mi boot screen then I power it on again and it worked
Redmi K20 Pro
[Raphael]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are NOT risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Drivers
Mi Flash
Minimal ADB and Fastboot
Unlock Bootloader
Unlock Bootloader
Unlock here
*AMD Ryzen System has a issues in Unlocking Bootloader try another PC (Intel System)
TWRP Recovery
TWRP
TWRP auto install
Unofficial TWRP 3.3.1 Recovery - RU and Eng
Unofficial TWRP 3.3.1 Recovery @nikk3d - Multilingual
Unofficial Pitch Black Recovery @nikk3d
OrangeFox Recovery Official R10
TWRP Recovery for Android Q
/ Installation
Root
Magisk Stable
Magisk Manager
Firmwares
China MIUI 11
9.9.9
9.9.6-9.9.9
9.10.8
11.0.2.0
11.0.3.0
11.0.1.0.
11.0.4.0
11.0.5.0
9.12.27
Global Stable
10.3.3.0 Fastboot
10.3.3.0 Recovery
Global Beta
China
V10.3.6.0.PFKCNXM Fastboot
V10.3.7.0.PFKCNXM Recovery
V10.3.7.0PFKCNXM Fastboot
V10.3.8.0.PFKCNXM Recovery
V10.3.8.0PFKCNXM Fastboot
V10.3.9.0PFKCNXM Recovery
V10.3.10.0PFKCNXM Recovery
V10.3.110.PFKCNXM Recovery
V10.3.12.0PFKCNXM Recovery
V10.3.14.0PFKCNXM Recovery
V10.3.16.0PFKCNXM Recovery
V10.4.4.0 RecoveryQFKCNXM
V10.4.4.6 RecoveryQFKCNXM
OTA
10.3.10.0 to 10.3.11.0
10.3.8.0 to 10.3.10.0
10.3.7.0 to 10.3.8.0
10.3.9.0 to 10.3.10.0
Beta
9.6.11
9.6.20
9.7.4
9.8.12
9.8.21
9.9.3
India
Stable Firmwares
10.3.3.0 Fastboot
10.3.5.0
10.4.7.0 Android Q
10.4.8.0 Android Q
Beta
Global
EU
9.6.13
9.6.20
10.3.9.0
10.3.10.0
10.3.11.0
9.6.27
[URL="https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv10/xiaomi.eu_multi_HMK20ProMI9TPro_V10.3.12.0.PFKCNXM_v10-9.zip/download"]10.3.12.0[/URL]
9.7.4
10.3.14.0
10.3.15.0
9.7.11
9.7.18
9.7.19
10.3.16
9.7.27
9.8.1
EU Android Q 9.8.8
9.8.12
9.8.15
9.8.22
10.3.17
EU Android Q 9.8.29
EU Android Q 10.4.4.0
9.9.3
9.9.6
10.3.30
EU Android Q 10.4.6.0
MIUI 11 9.9.26
MIUI 11 9.10.10
MIUI 11 11.0.2.0
MIUI 11 9.10.24
MIUI 11 9.11.7
MIUI 11 9.11.14
MIUI 11 9.11.21
MIUI 11 9.11.22
MIUI 11 9.11.28
MIUI 11 9.12.5
MIUI 11 9.12.12
MIUI 11 9.12.27
MIUI 11 20.1.16
Global EEA
10.3.1.0 PFKEUXM Fastboot
10.3.1.0 PFKEUXM Recovery
10.3.3.0 Recovery
Mi-Room
9.6.20
9.6.27
9.7.4
9.8.1
9.8.22 Android Q
9.8.29 Android Q
9.9.6 Android Q
MiuiMix
10.3.17.0
Mi-Italia
10.3.16.0
MIUI MS
9.7.18.9
9.7.25.9
9.8.1
Android Q 9.8.8
*Back up everything and Flash via TWRP Recovery
*For Raphael only (China ROM)
9.8.8 Q
9.8.8-9.8.29 Q
9.8.29 Q
MIUI 11 9.9.24
MIUI 11 9.9.25
[URL="https://hugeota.d.miui.com/9.9.26/miui_RAPHAEL_9.9.26_c74ffeeec0_10.0.zip"]MIUI 11 9.9.26[/URL]
Revolution OS
9.9.7
Google service error flash this
9.9.21 Q
9.9.21 Pie
Android Q [Unlocked Bootloader]
Beta 1
TWRP RESET Password
If you forget the password go to TWRP Recovery and Flash.
Removing Bloatwares in Locked/Unlocked Bootloader
-Enable Developer Options and click USB debugging
1.Open and click run as administrator XiaomiADBfastboottools.exe
2.Click Debloater
3.Check your phone (Allow)
4.Select the system apps that want you to delete
5. Wait for the process....
6.After finished.. click the Reboot into System
The Ultimate Guide for Redmi K20 Pro [Raphael]
Fake Global ROM to Chinese ROM to Global ROM/EU/Mi-Room
ATTENTION!*All that you will do with the phone is guided by this guide - it lies in the area of your personal responsibility only.*Neither I nor other members of the forum, not the administration of the forum are responsible.*
If you do not understand something and the written guide below - contact the LS to knowledgeable colleagues, as I did!*Hide created for the Chinese version of the phone K20 Pro - Global ROM.*(for India it will not work!)*
I will explain in stages what to do, giving my comments in my simple language: what?*What for?*Why?*Don't be scared that there are a lot of points - I tried to chew everything up.
So what do we have?*
• K20 Pro - Global ROM (Installed by the Chinese firmware, with no updates, poor translation, with not working Gpay)*
• You must create an official mi account and link the device to it.*
What do we need?:*
• Installation Recovery - Orange fox (Advanced replacement of standard Recovery, and installation of any firmware) - Wildly necessary thing!*
• Installing the firmware MI Room 9.7.4*
• Proper operation of the GPAY through the patch*
Introduction)*
So, you got a phone from China.*What do you have in your hands?*This is the device on which the Chinese put the left firmware and at the same time did not unlock the bootloader officially - which is not compatible with the transition to any, really good firmware.*
Before we begin - the most important thing!*(further quote from the forum):
ATTENTION!*CHINESE VERSION REDMI K20 PRO CAN BE BLOCKED ONLY ON THE CHINESE FIRMWARE!*Before carrying out any operation, read the materials that are referenced in the header themes, check Search by topic, and if not found the answer to your question, or do not understand something, ask more experienced users.*
Do you understand?*Now read again 20 and memorize this phrase!*
INSTALLATION OF THE CHINESE OFFICIAL FIRMWARE AND LOCKER DOWNLOAD AND UNLOCK!*
What for?*Your phone needs to be unlocked officially.*To do this, you must put the official firmware and file for unlocking officially.*
What is needed (all in the header):*
•Firmware file - *10.3.6.0 China Fastboot
• Program MiFlash 2018.11.15.0 (we need administrator rights) - a program to install Fastboot-type firmware and lock the phone loader.*
• Driver for computer - ADB Driver Lite
• Program - miflash_unlock*
• Phone*
• Type C Cable*
1) Download all of the above and check that everything downloaded*in the right “size”.*
2) Install MiFlash 2018.11.15.0*on the C drive:
3) Go to MiFlash 2018.11.15.0 - it will offer to install the drivers.*Do not hesitate to install everything - exit the program!*
4) Install ADB Driver Lite (by default it is set by MiFlash but will not be worse if you additionally install the latest driver from the header)
5) - CORRECTLY unpacking the firmware 10.3.6.0 China Fastboot!*By default, you download it with the extension .tgz!*The file you downloaded will be called raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn_ed862b8182.tgz*
- Unzip this .tgz file and get a file with the .tar extension.*The full name will be - raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn_ed862b8182.tar.*
- Unzip this .tar file and get a folder named raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn.*Here we will work with this folder in the future!*You need to move it to drive C:!*It is important!*
6) Switch the phone to debug mode via USB.*(I think there will be no problems here)
7) Transfer the phone to FASTBOOT mode.*Turn off the device.*Clamp the power button + volume rocker down.*If there is a hare and the inscription Fastboot then everything is OK!*
8) In MiFlash, press the Select button, specify the path to the folder with the firmware raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn and click ok.*
9) Something like this should appear in the line:*С: \ raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn
10) Put a clean all and lock checkbox at the bottom.*This parameter means that the*
phone will be erased while all data is erased, and the bootloader is locked.*(only for the Chinese version of the phone)*
11) We connect the phone (in fastboot mode) to the computer through the official drawstring.*And without any USB hubs and adapters!*
12) Press the Refresh button.
13) If everything is correct then a line should appear with the id of the phone and the status ready.*
14) So, the phone is recognized.*The path to the folder with the firmware is specified.*Galka clean all and lock costs.*Press the flash button.*
15) The phone starts to sew!*Do not unplug the power cord!*don't touch anything at all.*Do not breathe!*The firmware time is about 10 minutes.*
16) At the end of the firmware, complete will appear in the line with the execution status and the phone will restart (up to 10 minutes) to the initial welcome screen.*Disconnect the phone.*
17) Hooray you flashed to the Chinese firmware and officially blocked the phone.*Let's start the activation and application for unlocking.
18) The first thing that will meet you is the screen in Chinese.*With two button in Chinese.*Push first you are asked to enter something ... This is the password from your mi account.*We enter.*
19) Tap on the second button connect to the Wi-Fi or skip.*
20) Choose the English language.*Customize your phone.*
21) Transfer the phone to the developer mode.*In the settings of the developer, we go into the unlock status (I don’t remember exactly how to speak English).*We see the closed lock, below we see the button.*Click on it!*And we will register the phone for the official unlock (Wi-Fi should be turned off and mobile networks on).*
22) Next, go to the mi account and check that your mobile phone is tied.*Are you convinced?*I recommend to look at the corresponding topic on the forum with the video.
23) On the PC, run miflash_unlock.*Log in to your mi account.*The phone is transferred to the Fastboot mode (point 7) and connected to the computer.*Press the unlock button.*At the same time, we confirm a bunch of times that we are sure that we want to do this.*All your data will be destroyed.*
24) The PC starts to unlock and at some point gives a message that the unlock failed and should be tried again after 168 hours.
25) Congratulations, you activated the counter before unlocking.*You walk with the phone 7 days on the Chinese firmware.*Is it hard?*Well no.*You can take the apk with Google services from the page on this forum and install what you need.*
26) It's been 168 hours, and you're ready to unlock.*
27) But before you do ... Update your phone over the air to the latest version - nowhere on the forum it is not written (I have not seen) but this is important.*I will explain later why!*Remember this item.*
28) Start and repeat paragraph 23. And lo and behold!*The unlock process has begun.*And at the end there is an inscription that the phone is unlocked.
29) Now, when you boot your phone, you should see Unlocked.*Check out what it is!*
30) Configure the phone again.*Turn on USB debugging mode.*
31) Further, in my opinion the most dreary, because the forum has a lot of conflicting information.*I will tell you how I did.*But before continuing, I can say that since you have already received unlock, it is almost impossible to turn the phone around (but everything is possible)*
32) So, download three things:*
- TWRP-3.3.1*
- OrangeFox R10.0 Recovery*
- MI Room 9.7.4 firmware
33) Everything that you downloaded in the zip archives.
34) Unzip -TWRP-3.3.1 to drive C. Transfer the phone to Fastboot (item 7) and connect it to the computer.*We find in the unpacked folder TWRP file with the extension .bat.*in different versions of TWRP called differently.*I called Flash_twrp.bat*
35) And before*proceeding, I’ll*remind you about clause 27).*The fact is that I could not install TWRP without updating over the air.*Therefore, you must first install the update.*And on the firmware 10.3.6.0 China Fastboot.*- It will not work to put TWRP and you will have to do a lot again*
36) Start and get the menu in my Russian language, where we select the auto installation (1).*After a couple of seconds, your phone should reboot into TWRP recovery.*There we choose the language if asked.*
37) And
so, we are in the main menu of TWRP.*We need to take a series of actions*(in a strict order)
38) Go to the Wipe point and select FORMAT DATA -> svayp -> type yes.*The formatting process takes a couple of seconds.*What does this item do in my understanding?*He decrypts the data on the phone, which is necessary to throw on the phone firmware and Orange fox.*
39) Exit the main menu by clicking REBOOT Recovery.*The phone should reboot into the main menu again.*And on the PC, it should be defined as a phone with Internal storage.*Go to the Internal storage on the PC.*See the TWRP folder?*If yes, then everything is OK!*
40) On the phone, go to the Wipe point and select Advanced wipe -> svayp -> select all the items*except System and OTG* svayp
41) Exit the main menu, press REBOOT -> Recovery.*The phone should reboot into the main menu again.*
42) On the PC, go to the phone -> Internal storage and next to the TWRP folder, throw the downloaded OrangeFox R10.0 recovery directly into the zip archive.*
43) On the phone, go to the Install item and see our Orange Fox.*Choose it.*AND THERE IS THE MOST IMPORTANT!*He will ask you to install two checkboxes before installation: one of them Verification of the ZIP signature (in English) and so this checkbox must be removed, otherwise the error will be.*We start the installation.*Your phone must reboot into Orange FOX.*
44) So what is Orange Fox?*This same TWRP is simply much more convenient and stable.*
45) On the PC, go to the phone -> Internal storage and next to the TWRP folder, throw the downloaded firmware to the worlds.
46) In Orange Fox, select this firmware, also remove the checkmark ZIP signature check (in English).*And start the process of installing the firmware.*
47) Hooray you got the best, in my opinion, firmware)*
48) Disconnect from the computer.*Customize your phone.*
49) Installing a patch for Gpay is easy.*Straight from the phone, download the patch file.*
50) Put the phone in orange fox recovery mode.*Turn off the device.*We press the power button + volume rocker UP (not to be confused with the power button + volume rocker DOWN for Fastboot boot mode)*
51) In the Downloads folder we see our patch and install (also remove the Check Signature ZIP checkbox).*
52) Congratulations!
Thanks to
helpbabay911
Mysttorent
Viper4Android + DDPlus and Google Pay Fix for Redmi K20 Pro
Google Pay Fix
•TWRP Recovery from our site
•Do not install the patch simultaneously with other patches or firmware.
•Install the patch only on top of the installed firmware. If you have made a date wipe, first launch the firmware, perform the initial setup, and then install the patch itself.
•Before installing the patch, make sure that the Data section is mounted (usually it is mounted by default on all TWRPs).
Download
*Credits to Mi-Room RU
Viper4android + DDPlus =
1.Install Audio Modification Library (AML) and Audio Compatible Patch (ACP) via Magisk Repo and reboot.
2.Install DDPlus via Magisk and reboot.
3.Install Viper4Android via Magisk and reboot. (materialized).
4.selinux changer (choose permissive if not working in enforcing).
5.Profiles
Profiles with IRS 1
Profiles with IRS 2
Profiles
DDPlus
AML (You can download from Magisk Repo)
ACP (You can download from Magisk Repo)
Viper4android (You can download from Magisk Repo)
Reserved 3
Reserved 4
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Thank you for your amazing work!
khoaitaychienvn said:
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Click to expand...
Click to collapse
Yes, you can flash it with TWRP. That's the multilanguage rom with Google Play preinstalled and without the bloatware of the Chinese version.
madsponge26 said:
Reserved 1
Click to expand...
Click to collapse
Hi. I really appreciate the post.. just one question though? What are the firmwares for? Coz if I am not mistaken, to be able to install twrp and root, all I need is to unlock the bootloader then flash the twrp.img. Please enlighten me.. thank you..
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Also, will bootloader unlocking and installing twrp wipe everything I have in my internal storage?
melmarPH said:
Hi. I really appreciate the post.. just one question though? What are the firmwares for? Coz if I am not mistaken, to be able to install twrp and root, all I need is to unlock the bootloader then flash the twrp.img. Please enlighten me.. thank you..
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Also, will bootloader unlocking and installing twrp wipe everything I have in my internal storage?
Click to expand...
Click to collapse
The firmwares are the stock roms, should you need to recover the phone. The fastboot ROM is the absolute failsafe and flashes almost all partitions. This can be updated using scripts within the package or using the Mi flash tool. The recovery roms will just update the system partition and flashed using recovery, either stock or TWRP or any other recovery.
Installing TWRP won't touch anything on the phone except the recovery partition. However bootloader unlocking will perform a factory reset. In theory the internal storage should remain untouched, but best to back it up.
madsponge26 said:
Reserved 4
Click to expand...
Click to collapse
Hi, Please update the thread, here's a fastboot link for Firmware 10.3.7.0
https://bigota.d.miui.com/V10.3.7.0...FKCNXM_20190528.0000.00_9.0_cn_8b5bfd6d56.tgz
and 10.3.8.0
http://bigota.d.miui.com/V10.3.8.0....FKCNXM_20190601.0000.00_9.0_cn_beb2b2a432.tgz
Robbo.5000 said:
The firmwares are the stock roms, should you need to recover the phone. The fastboot ROM is the absolute failsafe and flashes almost all partitions. This can be updated using scripts within the package or using the Mi flash tool. The recovery roms will just update the system partition and flashed using recovery, either stock or TWRP or any other recovery.
Installing TWRP won't touch anything on the phone except the recovery partition. However bootloader unlocking will perform a factory reset. In theory the internal storage should remain untouched, but best to back it up.
Click to expand...
Click to collapse
That's crystal clear. Thank you so much..
khoaitaychienvn said:
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Click to expand...
Click to collapse
I would not suggest to flash it right now as a daily driver, here is a review for xiaomi eu rom.
https://www.youtube.com/watch?v=mTi8nYMJRx4
sorry can i ask 9.6.11 is global beta rom or china rom?
What is the wait time to unlock the bootloader?
bretzelpopo said:
What is the wait time to unlock the bootloader?
Click to expand...
Click to collapse
7 days
knight06 said:
sorry can i ask 9.6.11 is global beta rom or china rom?
Click to expand...
Click to collapse
I was with the same doubt. is that rom really a Beta version of the global rom?
knight06 said:
sorry can i ask 9.6.11 is global beta rom or china rom?
Click to expand...
Click to collapse
rafa_martineiz said:
I was with the same doubt. is that rom really a Beta version of the global rom?
Click to expand...
Click to collapse
9.6.11 is China Beta
9.6.13 is EU version which is from Xiaomi.EU . Unofficial global version based on China ROM that removes all chinese bloat and adds more languages.
New Links!
10.3.6.0 for Recovery
http://bigota.d.miui.com/V10.3.6.0.PFKCNXM/miui_RAPHAEL_V10.3.6.0.PFKCNXM_e679907a50_9.0.zip
10.3.9.0 for Recovery
http://bigota.d.miui.com/V10.3.9.0.PFKCNXM/miui_RAPHAEL_V10.3.9.0.PFKCNXM_bd915c4259_9.0.zip
MIUI 10 10.3.9.0 Android Pie 9.0 is up!
Changelog
MIUI 10 EU 10.3.9.0 Android Pie 9.0 is up!
Changelog
Hi,
today I tried to install TWRP.
After exiting TWRP with reboot button, my phone reboots but is stuck on Mi logo (no Android logo in the bottom).
I have access to TWRP and to fastboot, but due to the fact that I'm really new to this, I don't know what I have to do.
TWRP was "twrp-3.0.2-2-kenzo.img"
Redmi Note 3 Pro (KATE)
In another thread I read, that I should use twrp 3.3.1 official, unfortunately I don't know if its possible to flash another twrp without having access to the phone -_-
Can somebody help me?
(I wanted to flash Lineage OS to have a newer Android version with actual Android security patch level)
InfectFTW said:
Hi,
today I tried to install TWRP.
After exiting TWRP with reboot button, my phone reboots but is stuck on Mi logo (no Android logo in the bottom).
I have access to TWRP and to fastboot, but due to the fact that I'm really new to this, I don't know what I have to do.
TWRP was "twrp-3.0.2-2-kenzo.img"
Redmi Note 3 Pro (KATE)
In another thread I read, that I should use twrp 3.3.1 official, unfortunately I don't know if its possible to flash another twrp without having access to the phone -_-
Can somebody help me?
(I wanted to flash Lineage OS to have a newer Android version with actual Android security patch level)
Click to expand...
Click to collapse
U using old. Use latest 3.1.1 latest twrp from official twrp site.
Put favourite rom and gapps in external sd card
Format data
Wipe data
Flash rom
Flash gapps
Reboot.
Black_Stark said:
U using old. Use latest 3.1.1 latest twrp from official twrp site.
Put favourite rom and gapps in external sd card
Format data
Wipe data
Flash rom
Flash gapps
Reboot.
Click to expand...
Click to collapse
Thank you for your answer, but how can I get the new twrp on the phone?
Last time I did it via my pc and command terminal, but I think this won't work now because I can't "see" the phone in Windows
InfectFTW said:
Thank you for your answer, but how can I get the new twrp on the phone?
Last time I did it via my pc and command terminal, but I think this won't work now because I can't "see" the phone in Windows
Click to expand...
Click to collapse
Download this latest twrp img. It works for both kenzo and kate.
https://dl.twrp.me/kenzo/twrp-3.3.1-0-kenzo.img
Go to ur current twrp.
Click install and Select image
Select image file
It will ask u where to install
Select "recovery" partition
Swipe to Install
Reboot to recovery
Now u have new latest twrp
.
---------- Post added at 02:16 PM ---------- Previous post was at 02:01 PM ----------
Download this Aex Pie Rom
https://drive.google.com/open?id=1gl4S9tMZP0QR8EgrtoVs810LUTt2gwJp
It comes with google playstore. So no need to install gapps. Separately.
Download and copy this Pie rom zip in external sd card.
Now boot in twrp.
First go to wipe.
Click format data
Type YES to format
It will decrypt ur data partition and format data partition.
Now go to wipe - advanced wipe
Select all system, data, cache, dalvik, internal sd and wipe. But Do not select microsd card. :laugh:
Now go to install option
Browse to micro sd storage and select Aex pie rom zip
Swipe to install pie rom zip.
Wait patiently.
And reboot it will take 3 to 4 mins to boot pie rom.
Black_Stark said:
Download this latest twrp img. It works for both kenzo and kate.
Go to ur current twrp
Click to expand...
Click to collapse
But how can I access my current TWRP?
InfectFTW said:
But how can I access my current TWRP?
Click to expand...
Click to collapse
U said u already have access to twrp.
To boot into twrp .
Press volume up and power together.
Press and Hold both buttons together. When phone vibrates immediately release both button with first vibration.
Phone will boot in twrp.
Black_Stark said:
U said u already have access to twrp.
To boot into twrp .
Press volume up and power together.
Press and Hold both buttons together. When phone vibrates immediately release both button with first vibration.
Phone will boot in twrp.
Click to expand...
Click to collapse
Sorry, it was a wrong information of my side.
With volume up and Power I boot in Mi flash.
InfectFTW said:
Sorry, it was a wrong information of my side.
With volume up and Power I boot in Mi flash.
Click to expand...
Click to collapse
If u cant boot into twrp. Then u have flash fastboot kate rom using Pc.
But u need to confirm if u have kenzo or kate.
Kenzo is rn3 pro
http://bigota.d.miui.com/V10.2.1.0....XM_20190114.0000.00_6.0_global_8a48e54fe3.tgz
Kate is rn3 special edition.
http://bigota.d.miui.com/9.3.28/kate_global_images_9.3.28_20190328.0000.00_6.0_global_7f425d08d9.tgz
Black_Stark said:
If u cant boot into twrp. Then u have flash fastboot kate rom using Pc.
But u need to confirm if u have kenzo or kate.
Kenzo is rn3 pro
http://bigota.d.miui.com/V10.2.1.0....XM_20190114.0000.00_6.0_global_8a48e54fe3.tgz
Kate is rn3 special edition.
http://bigota.d.miui.com/9.3.28/kate_global_images_9.3.28_20190328.0000.00_6.0_global_7f425d08d9.tgz
Click to expand...
Click to collapse
Okay I just checked it.
Volume Up + Power --> MI-Recovery 3.0
Volume Down + Power --> Fastboot
I have definitively Redmi Note 3 KATE.
Can you tell me how to flash the image I just downloaded (the KATE version)?
InfectFTW said:
Okay I just checked it.
Volume Up + Power --> MI-Recovery 3.0
Volume Down + Power --> Fastboot
I have definitively Redmi Note 3 KATE.
Can you tell me how to flash the image I just downloaded (the KATE version)?
Click to expand...
Click to collapse
First check if ur phone is unlocked or relocked.
Connect to pc.
Put phone in fastboot mode.
Type this commamd
fastboot oem device-info
If unlocked = true then ur phone is unlocked
If unlocked = false then its relocked.
Check it first.
---------- Post added at 06:52 PM ---------- Previous post was at 06:22 PM ----------
Use this guide.
This will give link and procedure to flash fastboot rom.
U already downloaded fastboot firmware.
U only need to download miflashing tool.
https://xiaomiflashtool.com/tutorial/use-xiaomi-flash-tool
Extract the fastboot rom zip on pc.
Put phone in fastboot mode and connect to pc.
Run miflash tool. U must have win 64bit pc.
In miflash tool u Browse and select fastboot extracted main folder.
Select "clean all" option which u see in bottom corner of miflash tool.
Now click flash.
And wait for flashing process to finish.
Then disconnect cable and power ur device to boot.
@Black_Stark
wow, good news, it worked
Thank you very much!!!
I have now MIUI 10 Global 9.3.28 Beta on my phone with Android 6.0.1 MMB29M and Android security patch level 2018-07-01
I want to give this smartphone my grandmother, but I think it would be better, if there would be a newer Android security patch level.
That's why I wanted to install Lineage OS 17 (with this youtube video: https://www.youtube.com/watch?v=diC5UfAWcEU)
What do you say about that, and which OS would you prefer to get a newer Android security patch level?
InfectFTW said:
@Black_Stark
wow, good news, it worked
Thank you very much!!!
I have now MIUI 10 Global 9.3.28 Beta on my phone with Android 6.0.1 MMB29M and Android security patch level 2018-07-01
I want to give this smartphone my grandmother, but I think it would be better, if there would be a newer Android security patch level.
That's why I wanted to install Lineage OS 17 (with this youtube video:
)
What do you say about that, and which OS would you prefer to get a newer Android security patch level?
Click to expand...
Click to collapse
Lineage sucks.
If u giving to grandma then stay on miui.
Black_Stark said:
Lineage sucks.
If u giving to grandma then stay on miui.
Click to expand...
Click to collapse
No worries about Android Security Patch Level from 2018?
Hi @Black_Stark,
I want to flash the new official MiUI version V10.2.1.0.MHRMIXM (https://*************/download/redmi-note-3-se/)
Do I need the fastboot or recovery ROM?
How should I flash it?
First install newest TWRP 3.3.1.0 (https://eu.dl.twrp.me/kenzo/) and then flash the new image via TWRP?
InfectFTW said:
Hi @Black_Stark,
I want to flash the new official MiUI version V10.2.1.0.MHRMIXM (https://*************/download/redmi-note-3-se/)
Do I need the fastboot or recovery ROM?
How should I flash it?
First install newest TWRP 3.3.1.0 (https://eu.dl.twrp.me/kenzo/) and then flash the new image via TWRP?
Click to expand...
Click to collapse
There is no 10.2 version for kate.
U already are on latest version.
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk ?
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Next Weekly ROM by xiaomi.eu will be 20.10.22, released thursday (or friday if delayed by Xiaomi).
as soon as the .eu comes out I install
Enviado desde mi Mi 9T mediante Tapatalk
Micdu70 said:
Next Weekly ROM by xiaomi.eu will be 20.10.22, released thursday (or friday if delayed by Xiaomi).
Click to expand...
Click to collapse
Thanks for rectification ?
HumptyPotato47 said:
If i install china beta, i will get ota updates weekly ? Updates will work normally ?
Click to expand...
Click to collapse
Not certain about this but i think they support ota, maybe wait for xiaomi.eu if you really need ota?
If i have orangefox recovery and i wanna install xiaomi eu android 11 when it release this week, it's fine? Or need i to change recovery?
sidodz said:
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk ?
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Click to expand...
Click to collapse
Official TWRP 3.4.0.0 or something else?
so, this means this phone will be get miui 13 and android 11 officially, right?
GabiML said:
If i have orangefox recovery and i wanna install xiaomi eu android 11 when it release this week, it's fine? Or need i to change recovery?
Click to expand...
Click to collapse
yy i try it with 10.0.2 and i boot up without any problem, but when you need flash back a10 rom you must wipe data / system before...
sidodz said:
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Click to expand...
Click to collapse
And what is the latest Twrp because nothing that i saw says it supports android 11 spesifically
HumptyPotato47 said:
Just download the latest official version which is 3.4.0.0
Click to expand...
Click to collapse
do i just flash the recovery because i had mauronofrio and orangefox right now
Soft Bricked
yes, had a soft brick. phone was only booting in to fastboot. so used the "XiaoMiTool v2" and recovered the phone with MIUI 12.0.3.0 and then downloded the ota update 12.0.5.0 and then updated to it via manual update. now not thinking of doing it again for a while , don't want to get the device bricked again.
mzan said:
yes, had a soft brick. phone was only booting in to fastboot. so used the "XiaoMiTool v2" and recovered the phone with MIUI 12.0.3.0 and then downloded the ota update 12.0.5.0 and then updated to it via manual update. now not thinking of doing it again for a while , don't want to get the device bricked again.
Click to expand...
Click to collapse
How did you get your phone bricked?
By installing this update?
If yes did you use the latest twrp 3.4.0.0?
Did you wipe data/system before doing this?
Please give more detail so other users doesn't brick their devices
sidodz said:
How did you get your phone bricked?
By installing this update?
If yes did you use the latest twrp 3.4.0.0?
Did you wipe data/system before doing this?
Please give more detail so other users doesn't brick their devices
Click to expand...
Click to collapse
TWRP - Latest = Yes
Wipe - data/system = Yes
1) adb reboot fastboot
2) fastboot flash recovery twrp3.4.0.0....
3) fastboot reboot
4) held volume+ n Power
5) TWRP came
6) advance wipe - dalvik cache/system/data/cache
7) back to main menue
8) install - select storage - OTG
9) taped on the zip, slide to flash..
Everything went well successful.
10) reboot system -- came to fastboot, repeated the same step still fastboot
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
mzan said:
TWRP - Latest = Yes
6) advance wipe - dalvik cache/system/data/cache
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
Click to expand...
Click to collapse
I think you should've formatted data, then after a reboot wipe.
HumptyPotato47 said:
xiaomi.eu version finally released.
https://sourceforge.net/projects/xi...iles/xiaomi.eu/MIUI-WEEKLY-RELEASES/20.10.22/
Click to expand...
Click to collapse
do you know if i need to clean install this weekly?
I just did the clean install.
so far everything ok!
mzan said:
TWRP - Latest = Yes
Wipe - data/system = Yes
1) adb reboot fastboot
2) fastboot flash recovery twrp3.4.0.0....
3) fastboot reboot
4) held volume+ n Power
5) TWRP came
6) advance wipe - dalvik cache/system/data/cache
7) back to main menue
8) install - select storage - OTG
9) taped on the zip, slide to flash..
Everything went well successful.
10) reboot system -- came to fastboot, repeated the same step still fastboot
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
Click to expand...
Click to collapse
I think unlike previous iterations, we don't wipe system partition with these Roms as long as the vendor is same. (Means, If within MIUI Roms, no need. likewise with others such as AOSP)
strokesbr said:
I just did the clean install.
so far everything ok!
Click to expand...
Click to collapse
please mention the steps as for a rookie. pls
Thank You,
mzan said:
please mention the steps as for a rookie. pls
Thank You,
Click to expand...
Click to collapse
If your boot-loader is unlocked and have twrp, just FORMAT DATA, cache & Dalvik and flash the A11 Weekly Rom. Clean installation means formatting DATA partition and setting up as new.
I'm on weekly 20.09.17 and will be flashing the latest A11 weekly end of the day after work.
Edit: When you format DATA, your internal storage too would be wiped. So Make sure you have a PC (To mount twrp and copy the file) or OTG to push the Rom file to internal storage after formatting data.
manosath said:
And what is the latest Twrp because nothing that i saw says it supports android 11 spesifically
Click to expand...
Click to collapse
https://t.me/randomdavinci/33877
Requirements:
installed:
1.twrp3.2.3-z2x
ZUK edge Treble - Google Drive
drive.google.com
2.Z2151_CN_OPEN_USER_Q00030.1_O_ZUI_4.0.282_ST_181017_qpst
Installation:
1.TWRP---wipe---Format Data(Type yes).
2.Flash partition.zip
3. Wipe the Dalvik/ART cache, cache, system, data .
4. Flash RR-O-v6.1.0-20180728-z2x-Unofficial
ZUK edge Treble - Google Drive
drive.google.com
5.Wipe factory Reset(Some GSI may have to be wipe: system, cache, data, dalvik/cache。)
6. Flash android10、11 GSI arm64 Aonly image
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
7. Wipe factory Reset
8. Reboot and enjoy!
9.Optional Flash Certification_Patch_V2,[R]TeamDrivers_OpenGL-Vulkan_SD820-SD821_v4.5(For android10 GSI only!)
ZUK edge Treble - Google Drive
drive.google.com
Android 11 GSI notification ringtone fix:
On TWRP, mount system, advanced setup file management.
Copy the file“mediaextractor” and paste it into:
system/system_ext/apex/com.android.media/etc/seccomp_policy/mediaextractor.policy
Android 11 GSI Flash Screen Fix:
Flash GSI img files and boot the system, back to TWRP flash "adreno-5xx-v313-rev23-treble"。
Android 11 GSI Aonly Magisk Solutions:
1- Install magisk apk
2- Go to twrp & flash MAGISKA11-a-only
3- Flash Magisk-v22-canary-phh
4- Reboot and enjoy
DotOS-arm64-a-only and AncientOS-R-Society-v5.2-ARM64_A-only-Iron-20210227-vanilla can't boot,The following zip files can help boot and fix bugs.after flash GSI img to the system partition,flash this zip,wipe factory reset,reboot.
Thanks:
Art Chen
@hamido @kukuruyuk_pagi，@iam，@eternityson,@Ashle
AOSP V300.l
CAOS V300l avZ
Very interesting thread.
For gsi system a only as flyme emui coloros is same steps?
TarAntonio said:
Very interesting thread.
For gsi system a only as flyme emui coloros is same steps?
Click to expand...
Click to collapse
you device SD/vndk/Aonly or ab?go to learn GSI:https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
crDROID 6.14 work well.thanks:Braialindo, Guilherme2041
Tims Fong said:
you device SD/vndk/Aonly or ab?go to learn GSI:https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
Click to expand...
Click to collapse
Hey are you talking about zuk edge? What learn . I flashed an havoc pie gsi
someone has the link to download ?? ----> Z2151_CN_OPEN_USER_Q00030.1_O_ZUI_4.0.282_ST_181017_qpst
I get an error on twrp trying to flash RR-O-v6.1.0-20180728-z2x-Unofficial. It reads E2001: Unable to mount Vendor. Any help ?
Meminsim said:
I get an error on twrp trying to flash RR-O-v6.1.0-20180728-z2x-Unofficial. It reads E2001: Unable to mount Vendor. Any help ?
Click to expand...
Click to collapse
do you use this TWRP" recovery_vendor "?
Yes I do. Twrp 3.2.1
Meminsim said:
Yes I do. Twrp 3.2.1
Click to expand...
Click to collapse
try reboot to recovery,flash RR6.1.0 again.
I'm just telling you that on AOSP 11.0 V300.m still no have a notification ringtone, and you can't install a display driver, otherwise you can't boot.
Havoc-OS-v4.1-20210208-arm64-aonly-Official.img
CAOS V300m
lineage-18.1-20210212-UNOFFICIAL-treble_arm64_avS.img
I've almost tested all of gsis
same problem for most of them is that camera is too slow and too laggy. u may w8 for 10 secs until camera operates.
most of gsis have problem with fingerprint sensor.
is there any solution for these problems?
Agostino251 said:
I've almost tested all of gsis
same problem for most of them is that camera is too slow and too laggy. u may w8 for 10 secs until camera operates.
most of gsis have problem with fingerprint sensor.
is there any solution for these problems?
Click to expand...
Click to collapse
Yes, these are the characteristics of GSI, 1. No automatic brightness. 2. It takes 10 seconds for the front and rear cameras to switch. 3. Fingerprint unlock is not sensitive. Overlay is required to resolve these issues：https://github.com/phhusson/treble_experimentations/wiki/How-to-create-an-overlay?
Please come to this group and you will learn more: https://t.me/phhtreble
caos-v300m-210219-arm64-avZ.img + open_gapps-arm64-11.0-nano-20210130-TEST + adreno-5xx-v313-rev23-treble，Notification ringtones have been fixed, are already very stable, and can be used daily.thanks： eremitein
lir-v300m-210221-arm64-avZ.img + open_gapps-arm64-11.0-nano-20210130-TEST
thanks： eremitein