Question Redmi Note 10 can't flash stock ROM - Redmi Note 10

Hello
I have a big problem, can't go back to stock ROM from custom
I had some problems with TWRP recovery, so everything looks so bad in my phone
I flashed somehow CrDroid with temporary LOS recovery , because I can't flash any recovery, it says recovery_a no such partition so only place to flash it, it's systems place
So now TWRP is somehow in place of system partition not recovery, so I wanna get it back to factory state
Is it possible?
I tried MiFlash tool, downloaded stock ROM from Mi Comunnity but I get error when I try to flash
"Flashing of metadata is not allowed in snapshotted state"
I did research on google for this error. but didn't find anything
I also tried ROM from xiaomistockrom but no results, just got different error yesterday, something about name

Refer to the post linked below:
[ROM][11.0][OFFICIAL] crDroid Android v7.x (mojito/sunny)
*** Disclaimer I am not responsible for any damage you made to your device You have been warned crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features...
forum.xda-developers.com

WilcyWilson said:
Refer to the post linked below:
[ROM][11.0][OFFICIAL] crDroid Android v7.x (mojito/sunny)
*** Disclaimer I am not responsible for any damage you made to your device You have been warned crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features...
forum.xda-developers.com
Click to expand...
Click to collapse
Man. you are life savior
Stock ROM flashed with no errors
Thank you very much

Eduli said:
Man. you are life savior
Stock ROM flashed with no errors
Thank you very much
Click to expand...
Click to collapse
No worries man. Have fun !!!
Edit: Also thanks to the original poster @Zirila

WilcyWilson said:
Refer to the post linked below:
[ROM][11.0][OFFICIAL] crDroid Android v7.x (mojito/sunny)
*** Disclaimer I am not responsible for any damage you made to your device You have been warned crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features...
forum.xda-developers.com
Click to expand...
Click to collapse
thank you soo much for thisss! it took me almost half a day!!

Prinson said:
thank you soo much for thisss! it took me almost half a day!!
Click to expand...
Click to collapse
You're most welcome and it was same for me too.

Related

[DEV][ROM][4.4.4][CM11] KITKAT for GRAND2 [WIP]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This Support of the CyanogenMod is Unofficial and the sources are up at Androidarmv7.
STRICTLY FOR DEVELOPERS ONLY, NOOBS PLEASE DONT INSTALL IT NOW.
Don't know when Samsung will officially announce Kitkat update for our Galaxy Grand 2, so thought to create own CM-11 (Kitkat 4.4.4).
The ROM zip file is ready to test but at present it is giving Error 7 while flashing in Recoveries (TWRP, CWM and Philz). I have tried many times to get success in all recoveries but still no luck, so thought to share with other developers to check and find the error. At present it is not on github so please dont ask for link, will upload it soon. I have just compiled it from CyanogenMod source in my pc only.
I've got this idea to share with other developers from past experience with LG-P500. It is almost 4 years old phone and still running with KITKAT (see my signature). Developer AndroidMeda from Jenkins initially developed that rom for LG-P500 users without any success for almost 2 weeks from its release date and all lg-p500 developers/users tried their luck to get success. Luckly I was the first one to taste yummy KitKat on LG-P500 and after that it all went smooth.
So I am hopeful and looking forward to developers to get success soon for Grand 2 too.
Sharing ROM Link and my unsuccessful recovery logcat for reference.
Link : REMOVED BY VECTUS
reserved for future
one more reserved
is this official CM?
Sent from my SM-G7102 using XDA Premium 4 mobile app
Thanx for creating cm. And will you be making cm official ? I aint the best but.....
As I can see, theres a lot of mount and selinux failing problems.
And are you using first or second build of twrp ? As the second one has some fix for seLinux
mobihack said:
Thanx for creating cm. And will you be making cm official ? I aint the best but.....
As I can see, theres a lot of mount and selinux failing problems.
And are you using first or second build of twrp ? As the second one has some fix for seLinux
Click to expand...
Click to collapse
Ohhh thanks... I was using first built of TWRP, can you guys check on twrp built 2?
mukulsoni said:
Ohhh thanks... I was using first built of TWRP, can you guys check on twrp built 2?
Click to expand...
Click to collapse
Try use Philz ... I have problem with backup with twrp... So i use philz.... Just use philz... And @mukulsoni see my pm . maybe that can make the rom success in recovery
Glad i could help. And if I had the bandwidth I would download it for sure but I am on a limited plan.
Pl publish ur sources i.e device tree,kernel tree and vendor files .....
EDIT: did u add selinux support to the kernel source? thats the error
rutvikrvr said:
Pl publish ur sources i.e device tree,kernel tree and vendor files .....
EDIT: did u add selinux support to the kernel source? thats the error
Click to expand...
Click to collapse
Right..I think I told him to modify the kernel sources. @mukulsoni, enable the selinux settings in the kernel source. And also please mention the sources. If you don't you will violate GPL.
Sent from my GT-I9082 using Tapatalk
INFO
First of all thanks to the deve, Has anyone tested this, is it working please let me know.
vandroid699 said:
First of all thanks to the deve, Has anyone tested this, is it working please let me know.
Click to expand...
Click to collapse
you can try yourself.. and because you a dev for our grand 2, maybe you can fix the problem
mukulsoni said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Sharing ROM Link and my unsuccessful recovery logcat for reference.
Click to expand...
Click to collapse
Bro I got the problem......... i will be see it if it fix it then ...... i will let u know...............
aapav01 said:
Bro I got the problem......... i will be see it if it fix it then ...... i will let u know...............
Click to expand...
Click to collapse
Great, if you've got the error. Now I am able to flash it successfully in all 3 recoveries and when I click to reboot system its return back to download mode. So we have to work on kernel part now. lets hope for your success. :fingers-crossed:
Bro See the SS after fix the Flashing issuse ....................... but it boot to Odin MOde saying.. Couldnt do normal boot
mukulsoni said:
Great, if you've got the error. Now I am able to flash it successfully in all 3 recoveries and when I click to reboot system its return back to download mode. So we have to work on kernel part now. lets hope for your success. :fingers-crossed:
Click to expand...
Click to collapse
Yes It do boot to Downloading mode
aapav01 said:
Bro See the SS after fix the Flashing issuse ....................... but it boot to Odin MOde saying.. Couldnt do normal boot
Click to expand...
Click to collapse
As I said above, its get into Download mode, need to work on kernel part. Can you or any developer extract the kernel from this rom and work on it, at present I am busy in some other work.
mukulsoni said:
As I said above, its get into Download mode, need to work on kernel part. Can you or any developer extract the kernel from this rom and work on it, at present I am busy in some other work.
Click to expand...
Click to collapse
Im not to gud in Kernel bro
------------------------------------------------------------------------------
i Hve change the the following thing:
> update-binary
> path of system from " /dev/block/mmcblk0p22 " to " /dev/block/platform/msm_sdcc.1/by-name/system "
> path of boot.img to " /dev/block/mmcblk0p14 " to " /dev/block/platform/msm_sdcc.1/by-name/boot "
Just this MUCH... :angel:
modified file in Below
aapav01 said:
Im not to gud in Kernel bro
------------------------------------------------------------------------------
i Hve change the the following thing:
> update-binary
> path of system from " /dev/block/mmcblk0p22 " to " /dev/block/platform/msm_sdcc.1/by-name/system "
> path of boot.img to " /dev/block/mmcblk0p14 " to " /dev/block/platform/msm_sdcc.1/by-name/boot "
Just this MUCH... :angel:
modified file in Below
Click to expand...
Click to collapse
Can we try using CM with Stock Kernel??
white7561 said:
Can we try using CM with Stock Kernel??
Click to expand...
Click to collapse
nope

[ROM] [7.1.2] ResurrectionPixel [OFFICIAL] [31.05.2017]

ResurrectionPixel​OFFICIAL ROM DEVELOPED BY RBNLA & LUCASTANCIU​
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Informations:
ResurrectionPixel is based on Resurrection Remix and is supposed to bring the full Google Pixel Experience to your Device. Resurrection Remix is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device. More Informations on Telegramm.
Support:
Samsung Galaxy S6edge+ [F/C/7]
Samsung Galaxy Note5 [G/C/T]
Click to expand...
Click to collapse
Features:
Pixel: Launcher, Wallpaper, Dialer, Messenger, Contacts, Gmail, Calender, Camera, Settings, Sound, Bootanimation (and a lot more...)
Rooted with Magisk.
Security Patch Level: 05.05.2017.
Resurrection Remix Base / Android 7.1.2
All Resurrection Features.
Substratum support.
A lot that i dont remember...
Click to expand...
Click to collapse
Instruction:
It is recommended to install the ROM always clean and not dirty. If you find a bug/Issue, please tell if you have flash clean or dirty.
Flash ROM
Flash Update
Flash GApps
Boot your Device.
Go back to TWRP and flash your Kernel.
Please check THIS POST for more Informations!​
Click to expand...
Click to collapse
Issue/bug Report:
If you find an Issue/bug, please name your device you are using in your report. That helps us alot to fix your problems.
Issues/bugs:
you tell..
Click to expand...
Click to collapse
Downloads:
Please remember to select the correct kernel in the 2nd post. The Changelog you can fine in the 3rd post of this Thread. Please do not ETA for Updates. Update need to flash dirty over the latest ROM.
ROM
ResurrectionPixel 14.2-20170520 [G928F/G/C/7 I N920C/G]
ResurrectionPixel 14.2-20170520 [G928T I N920T]
UPDATE
ResurrectionPixel 14.2-20170520 -> 14.2-20170531 [G928F/G/C/7 I N920C/G]
ResurrectionPixel 14.2-20170520 -> 14.2-20170531 [G928T I N920T]
Click to expand...
Click to collapse
XDA: Information
ResurrectionPixel 14.1 , ROM for the Samsung Galaxy Note 5 & Samsung Galaxy S6edge+
Contributors & Developers
lucastanciu & rbnla
Special Thanks to the Tester's..
@neondragon1909
@LeoDS
@bill_kevin
@hamza steif
Telegram: https://t.me/joinchat/AAAAAEJyrL36j8D7qfgQPg
Resurrection Remix: https://forum.xda-developers.com/s6-edge-plus/orig-development/rom-resurrection-remix-t3605276
ROM OS Version: 7.x Nougat
ROM Kernel: android_kernel_samsung_zenlte
Version Information
Status: Stable
Created 2017-05-17
Last Updated 31.05.2017
Pixel+ [ N920T / N920C ]
Pixel+​OFFICIAL ADDON DEVELOPED BY RBNLA​
Many N920C and N920T users have many problems with the base of my ROM.
The base of RaymanFX, however, seems to work without bugs,
Therefore I would advise you to use its LineageOS ROM
and to flash the new Addon Pixel + in hindsight.
Pixel + brings the full Pixel Experience to this ROM.
Please do not forget that this was a lot of work.
So I would be glad if you would hit Thanks for the work!
Also hit thanks for RaymanFX as it is his lineageOS build.
Pixel + is an alternative as long as there is no well functioning C/T base.​
Instruction [N920T]:
Please follow the instructions carefully. Errors can lead to problems! If you want to report an error, please name your device.
Flash this LineageOS build.
Flash Pixel+ Addon.
Flash GApps
Reboot your device.. done!
Click to expand...
Click to collapse
Instruction [N920C]:
Please follow the instructions carefully. Errors can lead to problems! If you want to report an error, please name your device.
Flash this LineageOS build.
Flash Pixel+ Addon.
Flash GApps
Reboot your device.. done!
Click to expand...
Click to collapse
( The orange texts are also the download links. )​
Some Pixel Extras...
Live Wallpaper Force Close FIX
Substratum Theme Engine
Pixel UI Substratum Theme
XDA: Information
Pixel+ 2.0 , Addon for the Samsung Galaxy Note 5
Contributors & Developers
@RaymanFX, @rbnla
Telegram: https://t.me/joinchat/AAAAAEJyrL36j8D7qfgQPg
RaymanFX Thread: https://forum.xda-developers.com/note5/orig-development/rom-lineageos-14-1-t3572047
Version Information
Status: Testing
Last Update: 08.06.2017
Changelog & Kernels..
Kernels
How to flash .img Files in TWRP?​​Select img File in TWRP/Install. Now you can install .img files.​
Samsung Galaxy Note 5​
1) Flash the ROM and your GApps. Boot your device and after it boot's, go back to TWRP.
2) Flash this Kernel [boot1.img] with TWRP and reboot.
Samsung Galaxy S6 Edge Plus​
1) Flash the ROM and your GApps. Boot your device and after the boot, go back to TWRP.
2) Flash this Kernel [muffykeys.img] with TWRP and reboot.
__________________________________________________________________________________________​
Changelog
DATE I VERSION
13.07 I END OF DEVELOPMENT
31.05 I 14.2-20170531 ( Only Update - NO ROM! Flash it dirty over RP-20170520! )
Updated to latest Pixel Experience.
Updated Resurrection Pixel Tweaks.
Try to fix frezze error after calling.
Better Battery life. ( needs to be testet )
28.05 I 14.2-20170520
Added TMO ( G928T / N920T ) Build
It includes all changes to the version 14.2-20170520
20.05 I 14.2-20170520
Based on latest Ressurection Remix Build.
Fixed Bootloop.
Fixed Fingerprint not working.
Fixed root issue.
Fast reboot & boot tweak added.
Better ram managmant tweak added.
logcat disabled.
19.05 I 14.2-20170519
Intl. Release
Thx i will try as soon as posible
bill_kevin said:
Thx i will try as soon as posible
Click to expand...
Click to collapse
thank you
Awesome!!!! Can't wait to try it
by any chance would you happen to know how stability is looking like so far?
lumikin said:
by any chance would you happen to know how stability is looking like so far?
Click to expand...
Click to collapse
It is stable as well. If you want to be an tester please PM me on Telegramm!
Wow cnt wait...!!!! Thnx so much!!
Would love to test. lmk. Thanks!
Thanks for your feedback
Thread will be locked shortly. Xda does not allow placeholders. Hope you get something up before they lock it.
Does this ROM work on 9208?
rbnla said:
It is stable as well. If you want to be an tester please PM me on Telegramm!
Click to expand...
Click to collapse
Sure, I can test. What's your id in telegram?
cidxtc said:
Thread will be locked shortly. Xda does not allow placeholders. Hope you get something up before they lock it.
Click to expand...
Click to collapse
This thread has a function and will be provided soon with the first build.
Kernels are also available
Post poste no pointless stuff like ** The thread will be locked ** in my thread. I thank!
lumikin said:
Sure, I can test. What's your id in telegram?
Click to expand...
Click to collapse
Go into Telegramm Group and PM rbnla
This is my experience so far: I installed this on my N920W8 (obviously Canadian variant, on Rogers) and following the instructions the ROM booted up and at first glance it looks great. I was able to phone my cell, but couldn't hear anything in or out. Then it showed that the device is not rooted. I rebooted in recovery, installed "SR3-SuperSU-v2.79-SR3-20170114223742.zip", wiped Dalvik/Cache, now it's stuck in the animation boot thingy. I'm tempted to try again, this time try to root with Magisk.
++++++EDIT+++++
I tried every each way. I can't get it rooted, nor can I make voice work. Too bad. Not seeing TW was a joy.
pitaru said:
This is my experience so far: I installed this on my N920W8 (obviously Canadian variant, on Rogers) and following the instructions the ROM booted up and at first glance it looks great. I was able to phone my cell, but couldn't hear anything in or out. Then it showed that the device is not rooted. I rebooted in recovery, installed "SR3-SuperSU-v2.79-SR3-20170114223742.zip", wiped Dalvik/Cache, now it's stuck in the animation boot thingy. I'm tempted to try again, this time try to root with Magisk.
++++++EDIT+++++
I tried every each way. I can't get it rooted, nor can I make voice work. Too bad. Not seeing TW was a joy.
Click to expand...
Click to collapse
The ROM is not only yet.. How you can install an not released rom?
Pardon me? I installed this: RR-N-v5.8.3-20170511-zenltexx-Unofficial.zip
++++EDIT++++
I installed from here: https://forum.xda-developers.com/s6-edge-plus/orig-development/rom-resurrection-remix-t3605276
Please release me from my darkness.
+++++EDIT2++++
I get it now. I installed a different ROM, the one your ROM will be based on. Going back to TowchWiz until you release your ROM.
where is the rom download link?

[ROM][PIE/9.0.0][UNOFFICIAL]Resurrection Remix v7.0.2 [A6020]

Resurrection Remix P
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here is Resurrection Remix Pie based compiled using LineageOS sources from @YashGarg10 and @Harry8242. All the credits goes to these awesome developers. And of course, to the previous ones who have done every work on this device.
Current Status: Testing
What's Working/Not Working
My A6020a46 broke down completely a few months ago. I gave this ROM to my friend who has the exact same device so I wasn't able to test it completely.
I want you to report the bugs here. I will add them and try to fix them as soon as possible.
Not working
Camera
FM Radio
Sources
ROM: https://github.com/ResurrectionRemix
Device: https://github.com/wowufoundme/pie_device_lenovo_A6020
Kernel: https://github.com/wowufoundme/android_kernel_lenovo_msm8916
Vendor: https://github.com/wowufoundme/pie_vendor_lenovo_A6020
Downloads
TWRP 3.3.1.0 - A6020 (Flash in fastboot mode using fastboot flash recovery twrp-3.3.1-0-A6020.img)
Latest Build - AFH
OpenGApps
Installation (Clean Flah/If coming fro any other ROM)
1. Make sure you have the latest TWRP from Shreps (3.3.1.0).
2. Reboot into recovery mode
3. Select Wipe > Advanced Wipe
4. Tick mark Dalvik/ART Cache, Cache, System and Data
5. Swipe to wipe.
6. Select Install and select ROM zip
7. After flashing succeeds, wipe cache/dalvik cache, then Reboot system
8. After reboot completes, boot again into recovery and flash GApps package
9. Flash Magisk for root(optional) then reboot.
Installation (Dirty Flash)
1. Reboot into recovery mode
2. Select Install and select ROM zip
3. Flash TWRP zip but don't flash GApps.
4. After flashing succeeds, then Reboot system
Important Information
The ROM is currently under testing stage. I may not be able to provide changes very fast due to my placements but will try to release ASAP.
Screenshots
--See attachments--
Credits
Resurrection Remix Team
Lineage OS Team
YashGarg10, Harry8242, Shreps, scritch007 and all the awesome developers behind it.​
Thanks for the rom ?
Why do we need to flash gapps after first boot? Can we flash with the rom?
hayalmalikanesi said:
Thanks for the rom ?
Why do we need to flash gapps after first boot? Can we flash with the rom?
Click to expand...
Click to collapse
You can! Just to be on a safe side. Let the ROM get into your phone.
sorry, but i cant find (latest TWRP from Shreps (3.3.1.0) ) could u provide a link for us?
thanks.
Leozaors said:
sorry, but i cant find (latest TWRP from Shreps (3.3.1.0) ) could u provide a link for us?
thanks.
Click to expand...
Click to collapse
--Updated in the OP--
hi so glad to finally see a different version of android pie.but fm radio does not work, but always 100.00 channel does not have a fixed voice, but even though I did not see a problem Start TV broadcasting may be problematic
bro, no link, update pls. wanna test very much
Camera dont work
raynofff said:
bro, no link, update pls. wanna test very much
Click to expand...
Click to collapse
Link not work!
raynofff said:
bro, no link, update pls. wanna test very much
Click to expand...
Click to collapse
--Link Updated--
hiltonjr.lucas said:
Link not work!
Click to expand...
Click to collapse
^^
bro, at first sight, rom is smooth, fast and may be (at first sight) one of the best 9 roms i tried, device A6020a40.
one thing: quick unlock when correct pin is entered- i can't find where to activate, bcoz fingerprint unlock is useless in this device, face unlock is useless 4 me. this are only bugs i mentioned until now... Please make keylock work correct, or tell how to change it. (sorry 4 my bad english, it is not my native).
Thnks 4 ur work, looking forward for new in future. big respect.
---------- Post added at 09:45 AM ---------- Previous post was at 09:43 AM ----------
raynofff said:
bro, at first sight, rom is smooth, fast and may be (at first sight) one of the best 9 roms i tried, device A6020a40.
one thing: quick unlock when correct pin is entered- i can't find where to activate, bcoz fingerprint unlock is useless in this device, face unlock is useless 4 me. this are only bugs i mentioned until now... Please make keylock work correct, or tell how to change it. (sorry 4 my bad english, it is not my native).
Thnks 4 ur work, looking forward for new in future. big respect.
Click to expand...
Click to collapse
sorry, i forget- camera and sound - ewerything works good
are this smooth for gaming?
muhtarialdi said:
are this smooth for gaming?
Click to expand...
Click to collapse
This device itself ain't that good for gaming. Do yourself a favor and buy an OP
shubhkirtisharma said:
This device itself ain't that good for gaming. Do yourself a favor and buy an OP
Click to expand...
Click to collapse
i use mokee rom 7.1.2 now in my lenovo vibe k5. it was very smooth for gaming better than the other rom (include 8.1 and 9.0).
my question is, are this rom better than the other rom oreo and pie?
thank you
shubhkirtisharma said:
This device itself ain't that good for gaming. Do yourself a favor and buy an OP
Click to expand...
Click to collapse
Yes k5 plus isn't that much good but game like pubg u can play it smooth on some roms and lag on other
muhtarialdi said:
i use mokee rom 7.1.2 now in my lenovo vibe k5. it was very smooth for gaming better than the other rom (include 8.1 and 9.0).
my question is, are this rom better than the other rom oreo and pie?
thank you
Click to expand...
Click to collapse
try it and tell us
Thank you for this Rom, everything is working fine i havent found bugs yet except that the battery drains a little fast
shubhkirtisharma said:
--Link Updated--
Click to expand...
Click to collapse
Thanks for providing new Pie Rom for Lenovo A6020. Rom is fine and smooth. Since you are taking care of many wonderful Roms, I just want to know (Request), whether we can expect Pixel Experience Pie Rom for Lenovo A6020. Thank you once again for the efforts and support for this device.
youkrish said:
Thanks for providing new Pie Rom for Lenovo A6020. Rom is fine and smooth. Since you are taking care of many wonderful Roms, I just want to know (Request), whether we can expect Pixel Experience Pie Rom for Lenovo A6020. Thank you once again for the efforts and support for this device.
Click to expand...
Click to collapse
Pixel Experience Alpha build is there for A6020.

[SOLVED] Need help with flashing Lineage

I'm trying to get lineage installed on my ANE-LX1
I followed the official guide but my phone doenst boot into system it only boots into twrp.
bcs nothing worked i had to reinstall the stock os again by reinstalling stock recovery and doing the download latest version option.
emui version before flashing: 9.1.0.370(C432E7R1P7)
kernel: 4.9
twrp: twrp-3.4.0-1-anne
if you need any additional info let me know.
and thank you in advance to everyone who helps
docxgames said:
if you need any additional info let me know.
Click to expand...
Click to collapse
docxgames said:
if you need any additional info let me know
Click to expand...
Click to collapse
More precisely? Which LineageOS?
the latest one that is available for the p20 lite it came out earlier today
this is the complete filename: lineage-16.0-20201228-nightly-anne-signed.zip
docxgames said:
the latest one that is available for the p20 lite it came out earlier today
this is the complete filename: lineage-16.0-20201228-nightly-anne-signed.zip
Click to expand...
Click to collapse
Okay, try this way out...(please read carefully)
[ROM][OFFICIAL][anne][9] LineageOS 16.0
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project...
forum.xda-developers.com
How to install TWRP over eRecovery :
[ROM][OFFICIAL][anne][9] LineageOS 16.0
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project...
forum.xda-developers.com
-Alf- said:
Okay, try this way out...(please read carefully)
Click to expand...
Click to collapse
ty for the quick reply i'll keep you updated if it worked
docxgames said:
ty for the quick reply i'll keep you updated if it worked
Click to expand...
Click to collapse
IMO first downgrade to EMUI 9.1.0.278. Most of custom ROMs require lower build number, on latest build may or may not work correctly...
quick update: it worked more then before but not yet all the way bcs now i'm stuck on a bootloop; lineageos bootlogo is showing and moving but restarts after about 5 min.
docxgames said:
quick update: it worked more then before but not yet all the way bcs now i'm stuck on a bootloop; lineageos bootlogo is showing and moving but restarts after about 5 min.
Click to expand...
Click to collapse
Okay, I will try it, but my ANE is running chinese Oreo, so I must rebrand it, upgrade to Pie etc., it will take a while...
-Alf- said:
Okay, I will try it, but my ANE is running chinese Oreo, so I must rebrand it, upgrade to Pie etc., it will take a while...
Click to expand...
Click to collapse
successfully installed lineage-16.0-20201228-nightly-anne-signed (on 9.1.0.132 ,( .132 Service ROM I have on SD Card atm) . No bootloop, no restart, everything works. Used the same TWRP, same guide . So you are doing something wrong. Have you downgraded to the lower build number?
(This might be simply due to the incompatible build number).
-Alf- said:
No bootloop, no restart, everything works. Used the same TWRP, same guide . So you are doing something wrong.
(This might be simply due to the incompatible build number).
Click to expand...
Click to collapse
i guess yeah but i wonder what tho
-Alf- said:
Have you downgraded to the lower build number?
Click to expand...
Click to collapse
yeah i was downloading a rom from that AndroidHost.ru wich took a long time (3.5GB took 6 hours for some reason)
if you dont mind can you upload the emui rom you used so i have the same starting point (or the link where you got it)?
docxgames said:
or the link where you got it)?
Click to expand...
Click to collapse
Link
Try download early morning.
Btw, how badly do you need Lineage 16.0? If you want to use it as your daily driver, go back to Oreo and try LOS 15.1
LOS-15.1-hi6250
yeah i want to use it for daily use
so why would i be better off with 15.1 compared to 16.0?
edit: (i just succeeded into succecfully installing 16.0
ty for the help) it broke after first boot as soon as i swipe to unlock i get only a block screen
still interested as why 15.1 would be better
docxgames said:
why would i be better off with 15.1 compared to 16.0?
Click to expand...
Click to collapse
15.1 is based on Android 9, appears to be stable and well-supported.
docxgames said:
yeah i want to use it for daily use
so why would i be better off with 15.1 compared to 16.0?
edit: (i just succeeded into succecfully installing 16.0
ty for the help) it broke after first boot as soon as i swipe to unlock i get only a block screen
still interested as why 15.1 would be better
Click to expand...
Click to collapse
IDK about your device , but i think the fixes are
Booting into recovery , Flash magisk (V21 atleast)
Stuck at boot animation ? , Flash Disable-Dm-verity-Force-encrypt
These were tested on SM-J8 , so idk how good they work , still they are common files , so it should help
ty guys i'll try this next time.

[RECOVERY][oneplus2] TWRP 3.5.2 [UNOFFICIAL][DISCONTINUED]

LATEST TWRP FOR ONEPLUS 2, PORTED FROM NEXUS 6P.
WORKS WELL WITH ANDROID 11.
Latest VS Official 3.2:
Official TWRP 3.2 is built with OnePlus 2 by TWRP official and should be stable.
This unofficial TWRP 3.5.2 is ported from Nexus 6P's official one. The newer version means better support to new ROMs, especially Android 11 and higher. But please notice I can't promise that it is stable and everything works properly.
Installation:
Boot your phone into fastboot, connect it to your computer (or any other device that could run fastboot commands), make sure the driver is installed correctly.
Code:
# For flashing to recovery partition
fastboot flash recovery PATH/FILENAME.img
# For booting into TWRP temporarily
fastboot boot PATH/FILENAME.img
Known Issue(s):
Chinese Language XMLs currently not working.
Download:
Android File Host
Hello, and thanks for posting this! Can you explain what files were replaced, also where is the original source?
bitpushr said:
Hello, and thanks for posting this! Can you explain what files were replaced, also where is the original source?
Click to expand...
Click to collapse
Here is the source of the file:
Download twrp-3.5.0_9-0-angler.img
Download page for twrp-3.5.0_9-0-angler.img
dl.twrp.me
I unpacked it and replaced kernel.gz, recovery.fstab (in /initrd/etc/) and keys (in /initrd/res) and modified some values in /initrd/default.prop
What kernel.gz did you replace it with?
bitpushr said:
What kernel.gz did you replace it with?
Click to expand...
Click to collapse
from the oneplus2 twrp 3.4.0:
Download mukul2259 from SourceForge.net
Maybe stupid question, but what are benefits of this one over official 3.2?
dankovac1999 said:
Maybe stupid question, but what are benefits of this one over official 3.2?
Click to expand...
Click to collapse
It's much more friendly to Android 11 ROMs, though sadly we don't have one usable yet : (
Can I treblize my device with this recovery?
Missignal_Dev said:
It's much more friendly to Android 11 ROMs, though sadly we don't have one usable yet : (
Click to expand...
Click to collapse
It changed yesterday! Im moving to this recovery. But Im just wondering why isnt this device officially supported, when lot of older devices are.
dankovac1999 said:
It changed yesterday! Im moving to this recovery. But Im just wondering why isnt this device officially supported, when lot of older devices are.
Click to expand...
Click to collapse
Because it is old and not that popular. BTW. thank you for telling me this, I'm going to flash LOS 18.1. FINALLY AN USABLE ANDROID 11!!
Jaiwantn said:
Can I treblize my device with this recovery?
Click to expand...
Click to collapse
No.
**THIS WILL BE DISCONTINUED, INSTEAD I BUILT ORANGEFOX RECOVERY USING OP2 DEVICE TREE WHICH SUPPORTS ANDROID 11 PRETTY WELL.
Missignal_Dev said:
**THIS WILL BE DISCONTINUED, INSTEAD I BUILT ORANGEFOX RECOVERY USING OP2 DEVICE TREE WHICH SUPPORTS ANDROID 11 PRETTY WELL.
Click to expand...
Click to collapse
Pls provide download link of that
Jaiwantn said:
Pls provide download link of that
Click to expand...
Click to collapse
I'm writing the post, wait a minute
Jaiwantn said:
Pls provide download link of that
Click to expand...
Click to collapse
[RECOVERY][UNOFFICIAL] OrangeFox Recovery Project [R11.1][BETA v3]
Note: This is still a beta stage, I need your help in testing, thank you very much! (If you find a problem, please let me know) /* * Your warranty is now void. * * We're not responsible for bricked devices, dead SD cards, * thermonuclear war...
forum.xda-developers.com

Categories

Resources